The DOI matches its Crossref record; 216 of the 216 references it cites were found in a registry or an index.
Perovskite Photovoltaics: The Significant Role of Ligands in Film Formation, Passivation, and Stability
Open accessAbstract
Due to their outstanding optoelectronic properties, metal halide perovskites have been intensively studied in recent years. The latest certificated efficiency of 23.3% recently achieved in perovskite solar cells (PVSCs) enables them to be used as a very promising candidate for next‐generation photovoltaics. The morphology, defect density, and water resistance of perovskite films have an enormous impact on the performance and stability of PVSCs. Ligands, with coordinating capability, have been widely developed to improve the quality and stability of perovskite materials significantly. In the first section of this review, the role of ligands in fabricating perovskite films by different methods (one‐step, two‐step, and postdeposition treatment) is discussed. In the second section, the progress on ligand‐passivated perovskites via post‐treatment, in situ passivation during perovskite formation, and modifying the substrates before perovskite formation is reviewed. In the third section, a discussion of ligand‐stabilized perovskite films from the perspectives of crystal crosslinking, dimensionality engineering, and interfacial modification is presented. Finally, a summary and an outlook are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Self-citationEperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M. (2016) · Science · doi:10.1126/science.aaf8060 · Cited by 1,915
Yuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation
Azpiroz, J. M., Mosconi, E., Bisquert, J., & De Angelis, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01265a · Cited by 1,644
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Ligand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Aristidou, N., Eames, C., Sanchez-Molina, I., Bu, X., Kosco, J., Islam, M. S., & Haque, S. A. (2017) · Nature Communications · doi:10.1038/ncomms15218 · Cited by 1,298
Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Defects in perovskite-halides and their effects in solar cells
Ball, J. M., & Petrozza, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.149 · Cited by 1,275
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Self-citationTowards stable and commercially available perovskite solar cells
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., & Emery, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.152 · Cited by 1,182
The rapid evolution of highly efficient perovskite solar cells
Correa-Baena, J.-P., Abate, A., Saliba, M., Tress, W., Jesper Jacobsson, T., Grätzel, M., & Hagfeldt, A. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03397k · Cited by 1,140
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Sun, S., Salim, T., Mathews, N., Duchamp, M., Boothroyd, C., Xing, G., Sum, T. C., & Lam, Y. M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43161d · Cited by 1,109
Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites
Blancon, J.-C., Tsai, H., Nie, W., Stoumpos, C. C., Pedesseau, L., Katan, C., Kepenekian, M., Soe, C. M. M., Appavoo, K., Sfeir, M. Y., et al. (2017) · Science · doi:10.1126/science.aal4211 · Cited by 1,102
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Bryant, D., Aristidou, N., Pont, S., Sanchez-Molina, I., Chotchunangatchaval, T., Wheeler, S., Durrant, J. R., & Haque, S. A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00409a · Cited by 1,023
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
Dualeh, A., Tétreault, N., Moehl, T., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304022 · Cited by 967
Self-citationToward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Solar cell efficiency tables (version 50)
Green, M. A., Hishikawa, Y., Warta, W., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. H. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2909 · Cited by 910
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Kato, Y., Ono, L. K., Lee, M. V., Wang, S., Raga, S. R., & Qi, Y. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500195 · Cited by 844
Wang, Q., Shao, Y., Dong, Q., Xiao, Z., Yuan, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00233d · Cited by 832
Lee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Conducting Layered Organic-inorganic Halides Containing 〈110〉-Oriented Perovskite Sheets
Mitzi, D. B., Wang, S., Feild, C. A., Chess, C. A., & Guloy, A. M. (1995) · Science · doi:10.1126/science.267.5203.1473 · Cited by 808
Koh, T. M., Fu, K., Fang, Y., Chen, S., Sum, T. C., Mathews, N., Mhaisalkar, S. G., Boix, P. P., & Baikie, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp411112k · Cited by 790
Zhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C. R., Cimaroli, A. J., Guan, L., Ellingson, R. J., Zhu, K., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.18 · Cited by 776
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06658 · Cited by 759
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Yan, K., Long, M., Zhang, T., Wei, Z., Chen, H., Yang, S., & Xu, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00321 · Cited by 739
Crystal Structure and Photoconductivity of Cæsium Plumbohalides
MØLLER, C. K. (1958) · Nature · doi:10.1038/1821436a0 · Cited by 728
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Conings, B., Baeten, L., De Dobbelaere, C., D'Haen, J., Manca, J., & Boyen, H. (2014) · Advanced Materials · doi:10.1002/adma.201304803 · Cited by 691
Domanski, K., Alharbi, E. A., Hagfeldt, A., Grätzel, M., & Tress, W. (2018) · Nature Energy · doi:10.1038/s41560-017-0060-5 · Cited by 685
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie · doi:10.1002/ange.201406466 · Cited by 684
Stable high efficiency two-dimensional perovskite solar cells via cesium doping
Zhang, X., Ren, X., Liu, B., Munir, R., Zhu, X., Yang, D., Li, J., Liu, Y., Smilgies, D.-M., Li, R., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01145h · Cited by 678
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
A polymer scaffold for self-healing perovskite solar cells
Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q. (2016) · Nature Communications · doi:10.1038/ncomms10228 · Cited by 667
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Band-gap tuning of lead halide perovskites using a sequential deposition process
Kulkarni, S. A., Baikie, T., Boix, P. P., Yantara, N., Mathews, N., & Mhaisalkar, S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00435c · Cited by 634
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Cheng, Z., & Lin, J. (2010) · CrystEngComm · doi:10.1039/c001929a · Cited by 633
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Liang, K., Mitzi, D. B., & Prikas, M. T. (1998) · Chemistry of Materials · doi:10.1021/cm970568f · Cited by 612
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
NH2CH═NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells
Pang, S., Hu, H., Zhang, J., Lv, S., Yu, Y., Wei, F., Qin, T., Xu, H., Liu, Z., & Cui, G. (2014) · Chemistry of Materials · doi:10.1021/cm404006p · Cited by 580
Suppressed Ion Migration in Low-Dimensional Perovskites
Lin, Y., Bai, Y., Fang, Y., Wang, Q., Deng, Y., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00442 · Cited by 579
The efficiency limit of CH3NH3PbI3 perovskite solar cells
Sha, W. E. I., Ren, X., Chen, L., & Choy, W. C. H. (2015) · Applied Physics Letters · doi:10.1063/1.4922150 · Cited by 571
Self-citationDe Marco, N., Zhou, H., Chen, Q., Sun, P., Liu, Z., Meng, L., Yao, E.-P., Liu, Y., Schiffer, A., & Yang, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04060 · Cited by 564
Synthesis, Crystal Structure, and Optical and Thermal Properties of (C4H9NH3)2MI4 (M = Ge, Sn, Pb)
Mitzi, D. B. (1996) · Chemistry of Materials · doi:10.1021/cm9505097 · Cited by 561
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Self-citationHuang, F., Dkhissi, Y., Huang, W., Xiao, M., Benesperi, I., Rubanov, S., Zhu, Y., Lin, X., Jiang, L., Zhou, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.015 · Cited by 547
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Jodlowski, A. D., Roldán-Carmona, C., Grancini, G., Salado, M., Ralaiarisoa, M., Ahmad, S., Koch, N., Camacho, L., de Miguel, G., & Nazeeruddin, M. K. (2017) · Nature Energy · doi:10.1038/s41560-017-0054-3 · Cited by 533
Self-citationFunctionalization of perovskite thin films with moisture-tolerant molecules
Yang, S., Wang, Y., Liu, P., Cheng, Y.-B., Zhao, H. J., & Yang, H. G. (2016) · Nature Energy · doi:10.1038/nenergy.2015.16 · Cited by 521
Top and bottom surfaces limit carrier lifetime in lead iodide perovskite films
Yang, Y., Yang, M., Moore, D. T., Yan, Y., Miller, E. M., Zhu, K., & Beard, M. C. (2017) · Nature Energy · doi:10.1038/nenergy.2016.207 · Cited by 519
Cost‐Performance Analysis of Perovskite Solar Modules
Cai, M., Wu, Y., Chen, H., Yang, X., Qiang, Y., & Han, L. (2016) · Advanced Science · doi:10.1002/advs.201600269 · Cited by 513
Zhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499
Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 499
Im, J.-H., Kim, H.-S., & Park, N.-G. (2014) · APL MATERIALS · doi:10.1063/1.4891275 · Cited by 495
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells
Chen, Q., Zhou, H., Fang, Y., Stieg, A. Z., Song, T.-B., Wang, H.-H., Xu, X., Liu, Y., Lu, S., You, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8269 · Cited by 485
Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy
Feng, J., Zhu, X., Yang, Z., Zhang, X., Niu, J., Wang, Z., Zuo, S., Priya, S., Liu, S. (., & Yang, D. (2018) · Advanced Materials · doi:10.1002/adma.201801418 · Cited by 484
Low-Dimensional-Networked Metal Halide Perovskites: The Next Big Thing
Saidaminov, M. I., Mohammed, O. F., & Bakr, O. M. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00705 · Cited by 476
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
A Bifunctional Lewis Base Additive for Microscopic Homogeneity in Perovskite Solar Cells
Lee, J.-W., Bae, S.-H., Hsieh, Y.-T., De Marco, N., Wang, M., Sun, P., & Yang, Y. (2017) · Chem · doi:10.1016/j.chempr.2017.05.020 · Cited by 459
Methylamine‐Gas‐Induced Defect‐Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells
Zhou, Z., Wang, Z., Zhou, Y., Pang, S., Wang, D., Xu, H., Liu, Z., Padture, N. P., & Cui, G. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504379 · Cited by 440
Song, Z., Abate, A., Watthage, S. C., Liyanage, G. K., Phillips, A. B., Steiner, U., Graetzel, M., & Heben, M. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600846 · Cited by 439
Liao, W., Zhao, D., Yu, Y., Shrestha, N., Ghimire, K., Grice, C. R., Wang, C., Xiao, Y., Cimaroli, A. J., Ellingson, R. J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08337 · Cited by 438
Zhou, Y., Yang, M., Wu, W., Vasiliev, A. L., Zhu, K., & Padture, N. P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00477b · Cited by 436
Stoumpos, C. C., Soe, C. M. M., Tsai, H., Nie, W., Blancon, J.-C., Cao, D. H., Liu, F., Traoré, B., Katan, C., Even, J., et al. (2017) · Chem · doi:10.1016/j.chempr.2017.02.004 · Cited by 418
Hao, F., Stoumpos, C. C., Liu, Z., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509245x · Cited by 413
Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01439 · Cited by 401
Li, W., Fan, J., Li, J., Mai, Y., & Wang, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06444 · Cited by 398
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
Role of Chloride in the Morphological Evolution of Organo-Lead Halide Perovskite Thin Films
Williams, S. T., Zuo, F., Chueh, C.-C., Liao, C.-Y., Liang, P.-W., & Jen, A. K.-Y. (2014) · ACS Nano · doi:10.1021/nn5041922 · Cited by 385
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Two‐Dimensional Materials for Halide Perovskite‐Based Optoelectronic Devices
Chen, S., & Shi, G. (2017) · Advanced Materials · doi:10.1002/adma.201605448 · Cited by 380
Facet-dependent photovoltaic efficiency variations in single grains of hybrid halide perovskite
Leblebici, S. Y., Leppert, L., Li, Y., Reyes-Lillo, S. E., Wickenburg, S., Wong, E., Lee, J., Melli, M., Ziegler, D., Angell, D. K., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.93 · Cited by 374
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Self-citationChen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700162 · Cited by 358
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Self-citationBai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Hybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
Kim, M., Motti, S. G., Sorrentino, R., & Petrozza, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01101j · Cited by 344
Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A. M., & Yao, Y. (2015) · Nanoscale · doi:10.1039/c5nr02866c · Cited by 343
Solution Deposition‐Conversion for Planar Heterojunction Mixed Halide Perovskite Solar Cells
Docampo, P., Hanusch, F. C., Stranks, S. D., Döblinger, M., Feckl, J. M., Ehrensperger, M., Minar, N. K., Johnston, M. B., Snaith, H. J., & Bein, T. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400355 · Cited by 341
Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film
Fei, C., Li, B., Zhang, R., Fu, H., Tian, J., & Cao, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602017 · Cited by 334
Sun, C., Wu, Z., Yip, H., Zhang, H., Jiang, X., Xue, Q., Hu, Z., Hu, Z., Shen, Y., Wang, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501534 · Cited by 331
Self-citationWei, D., Ma, F., Wang, R., Dou, S., Cui, P., Huang, H., Ji, J., Jia, E., Jia, X., Sajid, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707583 · Cited by 330
Hadadian, M., Correa‐Baena, J., Goharshadi, E. K., Ummadisingu, A., Seo, J., Luo, J., Gholipour, S., Zakeeruddin, S. M., Saliba, M., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602785 · Cited by 327
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
HPbI3: A New Precursor Compound for Highly Efficient Solution‐Processed Perovskite Solar Cells
Wang, F., Yu, H., Xu, H., & Zhao, N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404007 · Cited by 316
Ultralow Self-Doping in Two-dimensional Hybrid Perovskite Single Crystals
Peng, W., Yin, J., Ho, K.-T., Ouellette, O., De Bastiani, M., Murali, B., El Tall, O., Shen, C., Miao, X., Pan, J., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01475 · Cited by 304
Paek, S., Schouwink, P., Athanasopoulou, E. N., Cho, K. T., Grancini, G., Lee, Y., Zhang, Y., Stellacci, F., Nazeeruddin, M. K., & Gao, P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05353 · Cited by 299
Self-citationPowell, D. M., Winkler, M. T., Choi, H. J., Simmons, C. B., Needleman, D. B., & Buonassisi, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03489a · Cited by 297
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505255 · Cited by 285
Self-citationEncapsulation for improving the lifetime of flexible perovskite solar cells
Weerasinghe, H. C., Dkhissi, Y., Scully, A. D., Caruso, R. A., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.006 · Cited by 284
Grain‐Boundary “Patches” by In Situ Conversion to Enhance Perovskite Solar Cells Stability
Liu, L., Huang, S., Lu, Y., Liu, P., Zhao, Y., Shi, C., Zhang, S., Wu, J., Zhong, H., Sui, M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800544 · Cited by 283
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
High-Quality (CH3NH3)3Bi2I9 Film-Based Solar Cells: Pushing Efficiency up to 1.64%
Zhang, Z., Li, X., Xia, X., Wang, Z., Huang, Z., Lei, B., & Gao, Y. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01952 · Cited by 271
Zhang, T., Yang, M., Zhao, Y., & Zhu, K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00843 · Cited by 270
Zheng, H., Liu, G., Zhu, L., Ye, J., Zhang, X., Alsaedi, A., Hayat, T., Pan, X., & Dai, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800051 · Cited by 265
2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells
Ma, C., Leng, C., Ji, Y., Wei, X., Sun, K., Tang, L., Yang, J., Luo, W., Li, C., Deng, Y., et al. (2016) · Nanoscale · doi:10.1039/c6nr04741f · Cited by 259
Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability
Zhang, X., Wu, G., Yang, S., Fu, W., Zhang, Z., Chen, C., Liu, W., Yan, J., Yang, W., & Chen, H. (2017) · Small · doi:10.1002/smll.201700611 · Cited by 256
Ke, W., Stoumpos, C. C., Logsdon, J. L., Wasielewski, M. R., Yan, Y., Fang, G., & Kanatzidis, M. G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08790 · Cited by 254
Zhang, H., Mao, J., He, H., Zhang, D., Zhu, H. L., Xie, F., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501354 · Cited by 251
Self-citationPassivated Perovskite Crystallization via g‐C3N4 for High‐Performance Solar Cells
Jiang, L., Wang, Z., Li, M., Zhang, C., Ye, Q., Hu, K., Lu, D., Fang, P., & Liao, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705875 · Cited by 250
Jo, Y., Oh, K. S., Kim, M., Kim, K., Lee, H., Lee, C., & Kim, D. S. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201500768 · Cited by 245
You, S., Wang, H., Bi, S., Zhou, J., Qin, L., Qiu, X., Zhao, Z., Xu, Y., Zhang, Y., Shi, X., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706924 · Cited by 242
Planar heterojunction perovskite solar cells with superior reproducibility
Jeon, Y.-J., Lee, S., Kang, R., Kim, J.-E., Yeo, J.-S., Lee, S.-H., Kim, S.-S., Yun, J.-M., & Kim, D.-Y. (2014) · Scientific Reports · doi:10.1038/srep06953 · Cited by 241
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
고민재, 이진우, 정인영, et al. (2015) · Cited by 235
Huang, Z., Hu, X., Liu, C., Tan, L., & Chen, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703061 · Cited by 232
Zhu, Z., Hadjiev, V. G., Rong, Y., Guo, R., Cao, B., Tang, Z., Qin, F., Li, Y., Wang, Y., Hao, F., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02883 · Cited by 230
Zhang, H., Cheng, J., Li, D., Lin, F., Mao, J., Liang, C., Jen, A. K. ‐., Grätzel, M., & Choy, W. C. H. (2017) · Advanced Materials · doi:10.1002/adma.201604695 · Cited by 225
Self-citationZhang, H., Ren, X., Chen, X., Mao, J., Cheng, J., Zhao, Y., Liu, Y., Milic, J., Yin, W.-J., Grätzel, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00580j · Cited by 223
Self-citationXu, X., Chueh, C.-C., Yang, Z., Rajagopal, A., Xu, J., Jo, S. B., & Jen, A. K.-Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.040 · Cited by 214
Zhou, Y., Yang, M., Pang, S., Zhu, K., & Padture, N. P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b02787 · Cited by 213
High Efficiency and High Open Circuit Voltage in Quasi 2D Perovskite Based Solar Cells
Cohen, B., Wierzbowska, M., & Etgar, L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604733 · Cited by 213
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Cao, J., Yin, J., Yuan, S., Zhao, Y., Li, J., & Zheng, N. (2015) · Nanoscale · doi:10.1039/c5nr01820j · Cited by 212
Chang, N. L., Yi Ho‐Baillie, A. W., Basore, P. A., Young, T. L., Evans, R., & Egan, R. J. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2871 · Cited by 212
Thermodynamically Self‐Healing 1D–3D Hybrid Perovskite Solar Cells
Fan, J., Ma, Y., Zhang, C., Liu, C., Li, W., Schropp, R. E. I., & Mai, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703421 · Cited by 208
Fu, Y., Rea, M. T., Chen, J., Morrow, D. J., Hautzinger, M. P., Zhao, Y., Pan, D., Manger, L. H., Wright, J. C., Goldsmith, R. H., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02948 · Cited by 207
Transforming Hybrid Organic Inorganic Perovskites by Rapid Halide Exchange
Pellet, N., Teuscher, J., Maier, J., & Grätzel, M. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00281 · Cited by 206
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., & Hayase, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp412627n · Cited by 202
Yao, K., Wang, X., Xu, Y.-X., Li, F., & Zhou, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00711 · Cited by 199
Jung, M., Shin, T. J., Seo, J., Kim, G., & Seok, S. I. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00995c · Cited by 195
Polymer Stabilization of Lead(II) Perovskite Cubic Nanocrystals for Semitransparent Solar Cells
Guo, Y., Shoyama, K., Sato, W., & Nakamura, E. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502317 · Cited by 194
Chaudhary, B., Kulkarni, A., Jena, A. K., Ikegami, M., Udagawa, Y., Kunugita, H., Ema, K., & Miyasaka, T. (2017) · ChemSusChem · doi:10.1002/cssc.201700271 · Cited by 193
Lu, J., Lin, X., Jiao, X., Gengenbach, T., Scully, A. D., Jiang, L., Tan, B., Sun, J., Li, B., Pai, N., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00754c · Cited by 182
Cai, F., Yan, Y., Yao, J., Wang, P., Wang, H., Gurney, R. S., Liu, D., & Wang, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801985 · Cited by 182
Ye, S., Rao, H., Yan, W., Li, Y., Sun, W., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Advanced Materials · doi:10.1002/adma.201603850 · Cited by 180
Strategic improvement of the long-term stability of perovskite materials and perovskite solar cells
Xu, T., Chen, L., Guo, Z., & Ma, T. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04553g · Cited by 168
The roles of alkyl halide additives in enhancing perovskite solar cell performance
Chueh, C., Liao, C., Zuo, F., Williams, S. T., Liang, P., & Jen, A. K. ‐. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05012f · Cited by 156
Multifunctional Benzoquinone Additive for Efficient and Stable Planar Perovskite Solar Cells
Qin, C., Matsushima, T., Fujihara, T., & Adachi, C. (2016) · Advanced Materials · doi:10.1002/adma.201603808 · Cited by 156
Yi, C., Li, X., Luo, J., Zakeeruddin, S. M., & Grätzel, M. (2016) · Advanced Materials · doi:10.1002/adma.201506049 · Cited by 151
Liu, J., Shirai, Y., Yang, X., Yue, Y., Chen, W., Wu, Y., Islam, A., & Han, L. (2015) · Advanced Materials · doi:10.1002/adma.201501489 · Cited by 150
Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells
Song, X. Y., Wang, W., Sun, P., Ma, W., & Chen, Z. (2015) · Applied Physics Letters · doi:10.1063/1.4906073 · Cited by 140
Zhu, H. L., Cheng, J., Zhang, D., Liang, C., Reckmeier, C. J., Huang, H., Rogach, A. L., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.6b02425 · Cited by 137
Self-citation
Cited by
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Stability challenges for the commercialization of perovskite–silicon tandem solar cells
Duan, L., Walter, D., Chang, N., Bullock, J., Kang, D., Phang, S. P., Weber, K., White, T., Macdonald, D., Catchpole, K., et al. (2023) · Nature Reviews Materials · doi:10.1038/s41578-022-00521-1 · Cited by 444
Materials chemistry and engineering in metal halide perovskite lasers
Dong, H., Zhang, C., Liu, X., Yao, J., & Zhao, Y. S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00598f · Cited by 411
Development of encapsulation strategies towards the commercialization of perovskite solar cells
Ma, S., Yuan, G., Zhang, Y., Yang, N., Li, Y., & Chen, Q. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02882k · Cited by 395
Metadata
- Authors
- Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-01-02
- Volume
- 31
- Issue
- 8
- Pages
- e1805702-e1805702
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2906063838
- Cited by
- 275
- References
- 216
- FWCI
- 16.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.