Cited by 312

The DOI matches its Crossref record; 157 of the 157 references it cites were found in a registry or an index.

Recent Progress in Inkjet‐Printed Thin‐Film Transistors

Open access

Chung, Seungjun, Cho, Kyungjune, Lee, Takhee·2019·Advanced Science

DOI 10.1002/advs.201801445

Open this paper in CoChat — free account

Abstract

Drop‐on‐demand inkjet printing is one of the most attractive techniques from a manufacturing perspective due to the possibility of fabrication from a digital layout at ambient conditions, thus leading to great opportunities for the realization of low‐cost and flexible thin‐film devices. Over the past decades, a variety of inkjet‐printed applications including thin‐film transistors (TFTs), radio‐frequency identification devices, sensors, and displays have been explored. In particular, many research groups have made great efforts to realize high‐performance TFTs, for application as potential driving components of ubiquitous wearable electronics. Although there are still challenges to enable the commercialization of printed TFTs beyond laboratory‐scale applications, the field of printed TFTs still attracts significant attention, with remarkable developments in soluble materials and printing methodology. Here, recent progress in printing‐based TFTs is presented from materials to applications. Significant efforts to improve the electrical performance and device‐yield of printed TFTs to match those of counterparts fabricated using conventional deposition or photolithography methods are highlighted. Moreover, emerging low‐dimension printable semiconductors, including carbon nanotubes and transition metal dichalcogenides as well as mature semiconductors, and new‐concept printed switching devices, are also discussed.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/advs.201801445

Cites

157 of 157 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Atomically Thin MoS 2 : A New Direct-Gap Semiconductor
Mak, K. F., Lee, C., Hone, J., Shan, J., & Heinz, T. F. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.136805 · Cited by 15,586
Single-layer MoS2 transistors
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V., & Kis, A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.279 · Cited by 14,939
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Energy Band-Gap Engineering of Graphene Nanoribbons
Han, M. Y., Özyilmaz, B., Zhang, Y., & Kim, P. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.206805 · Cited by 5,207
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Atomically precise bottom-up fabrication of graphene nanoribbons
Cai, J., Ruffieux, P., Jaafar, R., Bieri, M., Braun, T., Blankenburg, S., Muoth, M., Seitsonen, A. P., Saleh, M., Feng, X., et al. (2010) · Nature · doi:10.1038/nature09211 · Cited by 3,689
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Electronics based on two-dimensional materials
Fiori, G., Bonaccorso, F., Iannaccone, G., Palacios, T., Neumaier, D., Seabaugh, A., Banerjee, S. K., & Colombo, L. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.207 · Cited by 3,176
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2014) · ACS Nano · doi:10.1021/nn500064s · Cited by 2,753
Integrated Optoelectronic Devices Based on Conjugated Polymers
Sirringhaus, H., Tessler, N., & Friend, R. H. (1998) · Science · doi:10.1126/science.280.5370.1741 · Cited by 2,736
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
25th Anniversary Article: Organic Field‐Effect Transistors: The Path Beyond Amorphous Silicon
Sirringhaus, H. (2014) · Advanced Materials · doi:10.1002/adma.201304346 · Cited by 2,398
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
General observation of n-type field-effect behaviour in organic semiconductors
Chua, L.-L., Zaumseil, J., Chang, J.-F., Ou, E. C.-W., Ho, P. K.-H., Sirringhaus, H., & Friend, R. H. (2005) · Nature · doi:10.1038/nature03376 · Cited by 2,264
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Two-dimensional flexible nanoelectronics
Akinwande, D., Petrone, N., & Hone, J. (2014) · Nature Communications · doi:10.1038/ncomms6678 · Cited by 1,910
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Thin-Film Transistor Fabricated in Single-Crystalline Transparent Oxide Semiconductor
Nomura, K., Ohta, H., Ueda, K., Kamiya, T., Hirano, M., & Hosono, H. (2003) · Science · doi:10.1126/science.1083212 · Cited by 1,884
Inkjet printing of single-crystal films
Minemawari, H., Yamada, T., Matsui, H., Tsutsumi, J., Haas, S., Chiba, R., Kumai, R., & Hasegawa, T. (2011) · Nature · doi:10.1038/nature10313 · Cited by 1,707
MoS2transistors with 1-nanometer gate lengths
Desai, S. B., Madhvapathy, S. R., Sachid, A. B., Llinas, J. P., Wang, Q., Ahn, G. H., Pitner, G., Kim, M. J., Bokor, J., Hu, C., et al. (2016) · Science · doi:10.1126/science.aah4698 · Cited by 1,511
A bioinspired flexible organic artificial afferent nerve
Kim, Y., Chortos, A., Xu, W., Liu, Y., Oh, J. Y., Son, D., Kang, J., Foudeh, A. M., Zhu, C., Lee, Y., et al. (2018) · Science · doi:10.1126/science.aao0098 · Cited by 1,466
Self-citation
p -Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells
Irwin, M. D., Buchholz, D. B., Hains, A. W., Chang, R. P. H., & Marks, T. J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0711990105 · Cited by 1,350
Functionalized Pentacene: Improved Electronic Properties from Control of Solid-State Order
Anthony, J. E., Brooks, J. S., Eaton, D. L., & Parkin, S. R. (2001) · Journal of the American Chemical Society · doi:10.1021/ja0162459 · Cited by 1,328
A soft, wearable microfluidic device for the capture, storage, and colorimetric sensing of sweat
Koh, A., Kang, D., Xue, Y., Lee, S., Pielak, R. M., Kim, J., Hwang, T., Min, S., Banks, A., Bastien, P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf2593 · Cited by 1,308
A Physically Transient Form of Silicon Electronics
Hwang, S.-W., Tao, H., Kim, D.-H., Cheng, H., Song, J.-K., Rill, E., Brenckle, M. A., Panilaitis, B., Won, S. M., Kim, Y.-S., et al. (2012) · Science · doi:10.1126/science.1226325 · Cited by 1,286
Organic semiconductors: A theoretical characterization of the basic parameters governing charge transport
Brédas, J. L., Calbert, J. P., da Silva Filho, D. A., & Cornil, J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.092143399 · Cited by 1,276
Low-temperature fabrication of high-performance metal oxide thin-film electronics via combustion processing
Kim, M.-G., Kanatzidis, M. G., Facchetti, A., & Marks, T. J. (2011) · Nature Materials · doi:10.1038/nmat3011 · Cited by 1,212
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic
Cho, J. H., Lee, J., Xia, Y., Kim, B., He, Y., Renn, M. J., Lodge, T. P., & Daniel Frisbie, C. (2008) · Nature Materials · doi:10.1038/nmat2291 · Cited by 1,178
Tuning charge transport in solution-sheared organic semiconductors using lattice strain
Giri, G., Verploegen, E., Mannsfeld, S. C. B., Atahan-Evrenk, S., Kim, D. H., Lee, S. Y., Becerril, H. A., Aspuru-Guzik, A., Toney, M. F., & Bao, Z. (2011) · Nature · doi:10.1038/nature10683 · Cited by 1,100
Flexible metal-oxide devices made by room-temperature photochemical activation of sol–gel films
Kim, Y.-H., Heo, J.-S., Kim, T.-H., Park, S., Yoon, M.-H., Kim, J., Oh, M. S., Yi, G.-R., Noh, Y.-Y., & Park, S. K. (2012) · Nature · doi:10.1038/nature11434 · Cited by 1,080
High-Performance Semiconducting Polythiophenes for Organic Thin-Film Transistors
Ong, B. S., Wu, Y., Liu, P., & Gardner, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039772w · Cited by 1,041
Patterning organic single-crystal transistor arrays
Briseno, A. L., Mannsfeld, S. C. B., Ling, M. M., Liu, S., Tseng, R. J., Reese, C., Roberts, M. E., Yang, Y., Wudl, F., & Bao, Z. (2006) · Nature · doi:10.1038/nature05427 · Cited by 1,028
Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains
Diao, Y., Tee, B. C. K., Giri, G., Xu, J., Kim, D. H., Becerril, H. A., Stoltenberg, R. M., Lee, T. H., Xue, G., Mannsfeld, S. C. B., et al. (2013) · Nature Materials · doi:10.1038/nmat3650 · Cited by 1,011
Self-citation
A stable solution-processed polymer semiconductor with record high-mobility for printed transistors
Li, J., Zhao, Y., Tan, H. S., Guo, Y., Di, C.-A., Yu, G., Liu, Y., Lin, M., Lim, S. H., Zhou, Y., et al. (2012) · Scientific Reports · doi:10.1038/srep00754 · Cited by 899
Printable elastic conductors with a high conductivity for electronic textile applications
Matsuhisa, N., Kaltenbrunner, M., Yokota, T., Jinno, H., Kuribara, K., Sekitani, T., & Someya, T. (2015) · Nature Communications · doi:10.1038/ncomms8461 · Cited by 869
A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring
Imani, S., Bandodkar, A. J., Mohan, A. M. V., Kumar, R., Yu, S., Wang, J., & Mercier, P. P. (2016) · Nature Communications · doi:10.1038/ncomms11650 · Cited by 861
Recent Developments in p‐Type Oxide Semiconductor Materials and Devices
Wang, Z., Nayak, P. K., Caraveo‐Frescas, J. A., & Alshareef, H. N. (2016) · Advanced Materials · doi:10.1002/adma.201503080 · Cited by 779
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Sub-10 nm Carbon Nanotube Transistor
Franklin, A. D., Luisier, M., Han, S.-J., Tulevski, G., Breslin, C. M., Gignac, L., Lundstrom, M. S., & Haensch, W. (2012) · Nano Letters · doi:10.1021/nl203701g · Cited by 761
Organic Field-Effect Transistors from Solution-Deposited Functionalized Acenes with Mobilities as High as 1 cm2/V·s
Payne, M. M., Parkin, S. R., Anthony, J. E., Kuo, C.-C., & Jackson, T. N. (2005) · Journal of the American Chemical Society · doi:10.1021/ja042353u · Cited by 750
Scaling carbon nanotube complementary transistors to 5-nm gate lengths
Qiu, C., Zhang, Z., Xiao, M., Yang, Y., Zhong, D., & Peng, L.-M. (2017) · Science · doi:10.1126/science.aaj1628 · Cited by 739
Inkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers
Kim, S. W., Kim, T., Kim, Y. S., Choi, H. S., Lim, H. J., Yang, S. J., & Park, C. R. (2012) · Carbon · doi:10.1016/j.carbon.2011.08.011 · Cited by 695
Organic Solvent Dispersions of Single-Walled Carbon Nanotubes: Toward Solutions of Pristine Nanotubes
Ausman, K. D., Piner, R., Lourie, O., Ruoff, R. S., & Korobov, M. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002555m · Cited by 642
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
A Thienoisoindigo-Naphthalene Polymer with Ultrahigh Mobility of 14.4 cm2/V·s That Substantially Exceeds Benchmark Values for Amorphous Silicon Semiconductors
Kim, G., Kang, S.-J., Dutta, G. K., Han, Y.-K., Shin, T. J., Noh, Y.-Y., & Yang, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504537v · Cited by 607
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
High‐Mobility Field‐Effect Transistors Fabricated with Macroscopic Aligned Semiconducting Polymers
Tseng, H., Phan, H., Luo, C., Wang, M., Perez, L. A., Patel, S. N., Ying, L., Kramer, E. J., Nguyen, T., Bazan, G. C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201305084 · Cited by 568
Downscaling of self-aligned, all-printed polymer thin-film transistors
Noh, Y.-Y., Zhao, N., Caironi, M., & Sirringhaus, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.365 · Cited by 549
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Electronic transport properties of amorphous indium-gallium-zinc oxide semiconductor upon exposure to water
Park, J.-S., Jeong, J. K., Chung, H.-J., Mo, Y.-G., & Kim, H. D. (2008) · Applied Physics Letters · doi:10.1063/1.2838380 · Cited by 515
Few-layer molybdenum disulfide transistors and circuits for high-speed flexible electronics
Cheng, R., Jiang, S., Chen, Y., Liu, Y., Weiss, N., Cheng, H.-C., Wu, H., Huang, Y., & Duan, X. (2014) · Nature Communications · doi:10.1038/ncomms6143 · Cited by 513
Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices
Subramanian, V., Frechet, J. M. J., Chang, P. C., Huang, D. C., Lee, J. B., Molesa, S. E., Murphy, A. R., Redinger, D. R., & Volkman, S. K. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850305 · Cited by 507
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
All-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Kelly, A. G., Hallam, T., Backes, C., Harvey, A., Esmaeily, A. S., Godwin, I., Coelho, J., Nicolosi, V., Lauth, J., Kulkarni, A., et al. (2017) · Science · doi:10.1126/science.aal4062 · Cited by 501
Novel small molecules for organic field-effect transistors: towards processability and high performance
Mas-Torrent, M., & Rovira, C. (2008) · Chemical Society Reviews · doi:10.1039/b614393h · Cited by 469
Band gap opening of monolayer and bilayer graphene doped with aluminium, silicon, phosphorus, and sulfur
Denis, P. A. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2010.04.038 · Cited by 437
Inkjet printing of single-walled carbon nanotube/RuO2 nanowire supercapacitors on cloth fabrics and flexible substrates
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
Materials for Flexible, Stretchable Electronics: Graphene and 2D Materials
Kim, S. J., Choi, K., Lee, B., Kim, Y., & Hong, B. H. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-020901 · Cited by 433
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, T., Noguchi, Y., Zschieschang, U., Klauk, H., & Someya, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708340105 · Cited by 424
Lattice strain effects on the optical properties of MoS2 nanosheets
Yang, L., Cui, X., Zhang, J., Wang, K., Shen, M., Zeng, S., Dayeh, S. A., Feng, L., & Xiang, B. (2014) · Scientific Reports · doi:10.1038/srep05649 · Cited by 421
Wafer-Scale Fabrication of Separated Carbon Nanotube Thin-Film Transistors for Display Applications
Wang, C., Zhang, J., Ryu, K., Badmaev, A., De Arco, L. G., & Zhou, C. (2009) · Nano Letters · doi:10.1021/nl902522f · Cited by 411
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Lau, P. H., Takei, K., Wang, C., Ju, Y., Kim, J., Yu, Z., Takahashi, T., Cho, G., & Javey, A. (2013) · Nano Letters · doi:10.1021/nl401934a · Cited by 410
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
The p-type conduction mechanism in Cu2O: a first principles study
Nolan, M., & Elliott, S. D. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b611969g · Cited by 404
Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films
Fukuda, K., Takeda, Y., Yoshimura, Y., Shiwaku, R., Tran, L. T., Sekine, T., Mizukami, M., Kumaki, D., & Tokito, S. (2014) · Nature Communications · doi:10.1038/ncomms5147 · Cited by 403
Organic single-crystal field-effect transistors
Reese, C., & Bao, Z. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70016-0 · Cited by 397
Enabling Silicon for Solar-Fuel Production
Sun, K., Shen, S., Liang, Y., Burrows, P. E., Mao, S. S., & Wang, D. (2014) · Chemical Reviews · doi:10.1021/cr300459q · Cited by 393
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 358
Recent Progress in the Development of Printed Thin‐Film Transistors and Circuits with High‐Resolution Printing Technology
Fukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Carbon nanotube electronics – moving forward
Wang, C., Takei, K., Takahashi, T., & Javey, A. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35325c · Cited by 305
Bioinspired Composite Microfibers for Skin Adhesion and Signal Amplification of Wearable Sensors
Drotlef, D., Amjadi, M., Yunusa, M., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201701353 · Cited by 289
Investigation of Structure–Property Relationships in Diketopyrrolopyrrole-Based Polymer Semiconductors via Side-Chain Engineering
Back, J. Y., Yu, H., Song, I., Kang, I., Ahn, H., Shin, T. J., Kwon, S.-K., Oh, J. H., & Kim, Y.-H. (2015) · Chemistry of Materials · doi:10.1021/cm504545e · Cited by 280
High-Field-Effect Mobility of Low-Crystallinity Conjugated Polymers with Localized Aggregates
Son, S. Y., Kim, Y., Lee, J., Lee, G.-Y., Park, W.-T., Noh, Y.-Y., Park, C. E., & Park, T. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01046 · Cited by 279
Large-scale complementary macroelectronics using hybrid integration of carbon nanotubes and IGZO thin-film transistors
Chen, H., Cao, Y., Zhang, J., & Zhou, C. (2014) · Nature Communications · doi:10.1038/ncomms5097 · Cited by 274
All jet-printed polymer thin-film transistor active-matrix backplanes
Arias, A. C., Ready, S. E., Lujan, R. A., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1801673 · Cited by 272
A Circuits and Systems Perspective of Organic/Printed Electronics: Review, Challenges, and Contemporary and Emerging Design Approaches
Chang, J. S., Facchetti, A. F., & Reuss, R. (2017) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2017.2673863 · Cited by 271
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals
Niazi, M. R., Li, R., Qiang Li, E., Kirmani, A. R., Abdelsamie, M., Wang, Q., Pan, W., Payne, M. M., Anthony, J. E., Smilgies, D.-M., et al. (2015) · Nature Communications · doi:10.1038/ncomms9598 · Cited by 250
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Printed organic transistors for ultra-low-cost RFID applications
Subramanian, V., Chang, P. C., Lee, J. B., Molesa, S. E., & Volkman, S. K. (2005) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2005.859672 · Cited by 242
Cross-Linked Polymer Gate Dielectric Films for Low-Voltage Organic Transistors
Roberts, M. E., Queraltó, N., Mannsfeld, S. C. B., Reinecke, B. N., Knoll, W., & Bao, Z. (2009) · Chemistry of Materials · doi:10.1021/cm900637p · Cited by 236
Tuning Mechanical and Optoelectrical Properties of Poly(3-hexylthiophene) through Systematic Regioregularity Control
Kim, J.-S., Kim, J.-H., Lee, W., Yu, H., Kim, H. J., Song, I., Shin, M., Oh, J. H., Jeong, U., Kim, T.-S., et al. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00524 · Cited by 228
Gravure-printed electronics: recent progress in tooling development, understanding of printing physics, and realization of printed devices
Grau, G., Cen, J., Kang, H., Kitsomboonloha, R., Scheideler, W. J., & Subramanian, V. (2016) · Flexible and Printed Electronics · doi:10.1088/2058-8585/1/2/023002 · Cited by 226
High‐Performance, Air‐Stable Field‐Effect Transistors Based on Heteroatom‐Substituted Naphthalenediimide‐Benzothiadiazole Copolymers Exhibiting Ultrahigh Electron Mobility up to 8.5 cm V−1 s−1
Zhao, Z., Yin, Z., Chen, H., Zheng, L., Zhu, C., Zhang, L., Tan, S., Wang, H., Guo, Y., Tang, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602410 · Cited by 225
Large Area Electronics Using Printing Methods
Parashkov, R., Becker, E., Riedl, T., Johannes, H.-H., & Kowalsky, W. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850304 · Cited by 224
Screen Printing as a Scalable and Low-Cost Approach for Rigid and Flexible Thin-Film Transistors Using Separated Carbon Nanotubes
Cao, X., Chen, H., Gu, X., Liu, B., Wang, W., Cao, Y., Wu, F., & Zhou, C. (2014) · ACS Nano · doi:10.1021/nn505979j · Cited by 217
Large-Area Nanoscale Patterning: Chemistry Meets Fabrication
Henzie, J., Barton, J. E., Stender, C. L., & Odom, T. W. (2006) · Accounts of Chemical Research · doi:10.1021/ar050013n · Cited by 216
All Inkjet-Printed Amperometric Multiplexed Biosensors Based on Nanostructured Conductive Hydrogel Electrodes
Li, L., Pan, L., Ma, Z., Yan, K., Cheng, W., Shi, Y., & Yu, G. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00003 · Cited by 211
In‐Depth Studies on Rapid Photochemical Activation of Various Sol–Gel Metal Oxide Films for Flexible Transparent Electronics
Park, S., Kim, K., Jo, J., Sung, S., Kim, K., Lee, W., Kim, J., Kim, H. J., Yi, G., Kim, Y., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500545 · Cited by 203
Spray-combustion synthesis: Efficient solution route to high-performance oxide transistors
Yu, X., Smith, J., Zhou, N., Zeng, L., Guo, P., Xia, Y., Alvarez, A., Aghion, S., Lin, H., Yu, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1501548112 · Cited by 199
Oxygen “Getter” Effects on Microstructure and Carrier Transport in Low Temperature Combustion-Processed a-InXZnO (X = Ga, Sc, Y, La) Transistors
Hennek, J. W., Smith, J., Yan, A., Kim, M.-G., Zhao, W., Dravid, V. P., Facchetti, A., & Marks, T. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja403586x · Cited by 192
Selective Oxidation of Semiconducting Single-Wall Carbon Nanotubes by Hydrogen Peroxide
Miyata, Y., Maniwa, Y., & Kataura, H. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp055692y · Cited by 188
All-Inkjet-Printed Organic Thin-Film Transistor Inverter on Flexible Plastic Substrate
Chung, S., Kim, S. O., Kwon, S.-K., Lee, C., & Hong, Y. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2156757 · Cited by 187
Self-citation
A Highly Planar Fluorinated Benzothiadiazole‐Based Conjugated Polymer for High‐Performance Organic Thin‐Film Transistors
Nketia‐Yawson, B., Lee, H., Seo, D., Yoon, Y., Park, W., Kwak, K., Son, H. J., Kim, B., & Noh, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500233 · Cited by 178
Solution‐Processed Nanoporous Organic Semiconductor Thin Films: Toward Health and Environmental Monitoring of Volatile Markers
Zhang, F., Qu, G., Mohammadi, E., Mei, J., & Diao, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701117 · Cited by 166
Inkjet‐Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces
Khan, Y., Pavinatto, F. J., Lin, M. C., Liao, A., Swisher, S. L., Mann, K., Subramanian, V., Maharbiz, M. M., & Arias, A. C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503316 · Cited by 165
Stretchable Electrode Based on Laterally Combed Carbon Nanotubes for Wearable Energy Harvesting and Storage Devices
Hong, S., Lee, J., Do, K., Lee, M., Kim, J. H., Lee, S., & Kim, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704353 · Cited by 161
Gravure printing of conductive particulate polymer inks on flexible substrates
Pudas, M., Halonen, N., Granat, P., & Vähäkangas, J. (2005) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2005.07.008 · Cited by 160
All‐Printed, Foldable Organic Thin‐Film Transistors on Glassine Paper
Hyun, W. J., Secor, E. B., Rojas, G. A., Hersam, M. C., Francis, L. F., & Frisbie, C. D. (2015) · Advanced Materials · doi:10.1002/adma.201503478 · Cited by 158
All-Printed Paper Memory
Lien, D., Kao, Z.-K., Huang, T.-H., Liao, Y., Lee, S., & He, J. (2014) · ACS Nano · doi:10.1021/nn501231z · Cited by 158
Inkjet printed high-mobility indium zinc tin oxide thin film transistors
Lee, D.-H., Han, S.-Y., Herman, G. S., et al. (2009) · Journal of Materials Chemistry · doi:10.1039/b822893k · Cited by 149
Inkjet‐Printing: A New Fabrication Technology for Organic Transistors
Mattana, G., Loi, A., Woytasik, M., Barbaro, M., Noël, V., & Piro, B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700063 · Cited by 149
High-Speed, Inkjet-Printed Carbon Nanotube/Zinc Tin Oxide Hybrid Complementary Ring Oscillators
Kim, B.-J., Jang, S., Geier, M. L., Prabhumirashi, P. L., Hersam, M. C., & Dodabalapur, A. (2014) · Nano Letters · doi:10.1021/nl5016014 · Cited by 139
Large‐Area Assembly of Densely Aligned Single‐Walled Carbon Nanotubes Using Solution Shearing and Their Application to Field‐Effect Transistors
Park, S., Pitner, G., Giri, G., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405289 · Cited by 138
High Mobility Field‐Effect Transistors with Versatile Processing from a Small‐Molecule Organic Semiconductor
Mei, Y., Loth, M. A., Payne, M. M., Zhang, W., Smith, J. N., Day, C. S., Parkin, S., Heeney, M., McCulloch, I. A., Anthopoulos, T. D., et al. (2013) · Advanced Materials · doi:10.1002/adma.201205371 · Cited by 137
Fully Printed Stretchable Thin-Film Transistors and Integrated Logic Circuits
Cai, L., Zhang, S., Miao, J., Yu, Z., & Wang, C. (2016) · ACS Nano · doi:10.1021/acsnano.6b07190 · Cited by 137
Large‐Scale Precise Printing of Ultrathin Sol–Gel Oxide Dielectrics for Directly Patterned Solution‐Processed Metal Oxide Transistor Arrays
Lee, W., Park, W., Park, S., Sung, S., Noh, Y., & Yoon, M. (2015) · Advanced Materials · doi:10.1002/adma.201502239 · Cited by 136
Polymer Field‐Effect Transistors Fabricated by the Sequential Gravure Printing of Polythiophene, Two Insulator Layers, and a Metal Ink Gate
Voigt, M. M., Guite, A., Chung, D., Khan, R. U. A., Campbell, A. J., Bradley, D. D. C., Meng, F., Steinke, J. H. G., Tierney, S., McCulloch, I. A., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901597 · Cited by 136
Electrifying inks with 2D materials
Torrisi, F., & Coleman, J. N. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.218 · Cited by 134
Flexible Organic Light-Emitting Diode Displays Driven by Inkjet-Printed High-Mobility Organic Thin-Film Transistors
Mizukami, M., Cho, S.-I., Watanabe, K., Abiko, M., Suzuri, Y., Tokito, S., & Kido, J. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2776296 · Cited by 132
Phonon-driven spin-Floquet magneto-valleytronics in MoS2
Shin, D., Hübener, H., Giovannini, U. D., Jin, H., Rubio, Á., & Park, N. (2018) · Nature Communications · doi:10.1038/s41467-018-02918-5 · Cited by 132
Inkjet Printed, High Mobility Inorganic-Oxide Field Effect Transistors Processed at Room Temperature
Dasgupta, S., Kruk, R., Mechau, N., & Hahn, H. (2011) · ACS Nano · doi:10.1021/nn202992v · Cited by 131
Poly(Pyridinium Phenylene)s: Water-Soluble N-Type Polymers
Izuhara, D., & Swager, T. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906513u · Cited by 125
Inkjet-Printed Zinc Tin Oxide Thin-Film Transistor
Kim, D., Jeong, Y., Song, K., et al. (2009) · Langmuir · doi:10.1021/la901436p · Cited by 123
Fully Inkjet‐Printed Transparent Oxide Thin Film Transistors Using a Fugitive Wettability Switch
Jang, J., Kang, H., Nallan, H. C., & Subramanian, V. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500086 · Cited by 122
Mechanically Reinforced Skin‐Electronics with Networked Nanocomposite Elastomer
Han, S., Kim, M. K., Wang, B., Wie, D. S., Wang, S., & Lee, C. H. (2016) · Advanced Materials · doi:10.1002/adma.201603878 · Cited by 122
Separated Carbon Nanotube Macroelectronics for Active Matrix Organic Light-Emitting Diode Displays
Zhang, J., Fu, Y. G., Wang, C., Chen, P.-C., Liu, Z., Wei, W., Wu, C., Thompson, M. E., & Zhou, C. (2011) · Nano Letters · doi:10.1021/nl202695v · Cited by 116
Fully gravure and ink-jet printed high speed pBTTT organic thin film transistors
Vornbrock, A. D. L. F., Sung, D., Kang, H., et al. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.09.003 · Cited by 110
All-inkjet-printed thin-film transistors: manufacturing process reliability by root cause analysis
Sowade, E., Ramón, E., Mitra, K. Y., Martínez‐Domingo, C., Pedró, M., Pallarès, J., Loffredo, F., Villani, F., Gomes, H. L., Terés, L., et al. (2016) · Scientific Reports · doi:10.1038/srep33490 · Cited by 109
Carbon nanotube-based flexible electronics
Li, X., Zhang, H., Hu, Y., & Peng, L. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02280a · Cited by 108
Roll-to-roll processing of film substrates for hybrid integrated flexible electronics
Palavesam, N., Marin, S., Hemmetzberger, D., Landesberger, C., Bock, K., & Kutter, C. (2018) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aaaa04 · Cited by 107
Organic flash memory on various flexible substrates for foldable and disposable electronics
Lee, S., Seong, H., Im, S. G., Moon, H., & Yoo, S. (2017) · Nature Communications · doi:10.1038/s41467-017-00805-z · Cited by 105
High Yield, Single Droplet Electrode Arrays for Nanoscale Printed Electronics
Caironi, M., Gili, E., Sakanoue, T., Cheng, X., & Sirringhaus, H. (2010) · ACS Nano · doi:10.1021/nn9014664 · Cited by 104
A review on the recent developments of solution processes for oxide thin film transistors
Ahn, B. D., Jeon, H.-J., Sheng, J., Park, J., & Park, J. (2015) · Semiconductor Science and Technology · doi:10.1088/0268-1242/30/6/064001 · Cited by 102
From Printed Transistors to Printed Smart Systems
Street, R. A., Ng, T. N., Schwartz, D. E., Whiting, G. L., Lu, J. P., Bringans, R. D., & Veres, J. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2408552 · Cited by 94
Transparent Large-Area MoS2 Phototransistors with Inkjet-Printed Components on Flexible Platforms
Kim, T., Ha, J., Cho, K., Pak, J., Seo, J., Park, J., Kim, J., Chung, S., Hong, Y., & Lee, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b04893 · Cited by 94
Self-citation
Contact‐Induced Nucleation in High‐Performance Bottom‐Contact Organic Thin Film Transistors Manufactured by Large‐Area Compatible Solution Processing
Niazi, M. R., Li, R., Abdelsamie, M., Zhao, K., Anjum, D. H., Payne, M. M., Anthony, J. E., Smilgies, D., & Amassian, A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502428 · Cited by 86
Key Issues With Printed Flexible Thin Film Transistors and Their Application in Disposable RF Sensors
Noh, J., Jung, M., Jung, Y., Yeom, C., Pyo, M., & Cho, G. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2410303 · Cited by 84
Flexible logic circuits based on top-gate thin film transistors with printed semiconductor carbon nanotubes and top electrodes
Xu, W., Liu, Z., Zhao, J., Xu, W., Gu, W., Zhang, X., Long, Q., & Cui, Z. (2014) · Nanoscale · doi:10.1039/c4nr05471g · Cited by 81
Reduced graphene oxide with a highly restored π-conjugated structure for inkjet printing and its use in all-carbon transistors
Su, Y., Du, J., Sun, D., Liu, C., & Cheng, H. (2013) · Nano Research · doi:10.1007/s12274-013-0362-2 · Cited by 76
Easily doped p-type, low hole effective mass, transparent oxides
Sarmadian, N., Saniz, R., Partoens, B., & Lamoen, D. (2016) · Scientific Reports · doi:10.1038/srep20446 · Cited by 76
Screen-Printable Electronic Ink of Ultrathin Boron Nitride Nanosheets
Joseph, A. M., Nagendra, B., Gowd, E. B., & Surendran, K. P. (2016) · ACS Omega · doi:10.1021/acsomega.6b00242 · Cited by 73
Inkjet-printed stretchable single-walled carbon nanotube electrodes with excellent mechanical properties
Kim, T., Song, H., Ha, J., Kim, S., Kim, D., Chung, S., Lee, J., & Hong, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4868633 · Cited by 72
Self-citation
Electrical Properties of Synthesized Large-Area MoS2 Field-Effect Transistors Fabricated with Inkjet-Printed Contacts
Kim, T., Amani, M., Ahn, G. H., Song, Y., Javey, A., Chung, S., & Lee, T. (2016) · ACS Nano · doi:10.1021/acsnano.5b07942 · Cited by 72
Self-citation
Inkjet Printing of High Performance Transistors with Micron Order Chemically Set Gaps
Grubb, P. M., Subbaraman, H., Park, S., Akinwande, D., & Chen, R. T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01391-2 · Cited by 71
Fully Inkjet‐Printed Thin‐Film Transistor Array Manufactured on Paper Substrate for Cheap Electronic Applications
Mitra, K. Y., Polomoshnov, M., Martínez‐Domingo, C., Mitra, D., Ramón, E., & Baumann, R. R. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700275 · Cited by 64
Highly Flexible AM-OLED Display With Integrated Gate Driver Using Amorphous Silicon TFT on Ultrathin Metal Foil
Yoo, J., Jung, S., Kim, Y., Byun, S.-C., Kim, J.-M., Choi, N., Yoon, S., Kim, C., Hwang, Y., & Chung, I. (2010) · Journal of Display Technology · doi:10.1109/jdt.2010.2048998 · Cited by 62
Effect of Surface Wettability Properties on the Electrical Properties of Printed Carbon Nanotube Thin-Film Transistors on SiO2/Si Substrates
Liu, Z., Zhao, J., Xu, W., Long, Q., Nie, S., & Cui, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502168x · Cited by 58
Megahertz-class printed high mobility organic thin-film transistors and inverters on plastic using attoliter-scale high-speed gravure-printed sub-5 μm gate electrodes
Kang, H., Kitsomboonloha, R., Ulmer, K., Stecker, L. H., Grau, G., Jang, J., & Subramanian, V. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.10.005 · Cited by 56
Selective Conversion from p-Type to n-Type of Printed Bottom-Gate Carbon Nanotube Thin-Film Transistors and Application in Complementary Metal–Oxide–Semiconductor Inverters
Xu, Q., Zhao, J., Pecunia, V., Xu, W., Zhou, C., Dou, J., Gu, W., Lin, J., Mo, L., Zhao, Y., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01666 · Cited by 55
Iron Oxide Nanoparticle‐Based Magnetic Ink Development for Fully Printed Tunable Radio‐Frequency Devices
Vaseem, M., Ghaffar, F. A., Farooqui, M. F., & Shamim, A. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700242 · Cited by 49
High‐Throughput Fabrication of Flexible and Transparent All‐Carbon Nanotube Electronics
Chen, Y., Sun, Y., Zhu, Q., Wang, B., Yan, X., Qiu, S., Li, Q., Hou, P., Liu, C., Sun, D., et al. (2018) · Advanced Science · doi:10.1002/advs.201700965 · Cited by 47
All‐Carbon Thin‐Film Transistors as a Step Towards Flexible and Transparent Electronics
Sun, D., Liu, C., Ren, W., & Cheng, H. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600229 · Cited by 46
Shear Modulated Percolation in Carbon Nanotube Composites
Xu, J., Florkowski, W., Gerhardt, R. A., Moon, K., & Wong, C. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp061090i · Cited by 44
Printed Organic and Inorganic Electronics: Devices To Systems
Sevilla, G. A. T., & Hussain, M. M. (2016) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2016.2619979 · Cited by 43
Printed thin film transistors and CMOS inverters based on semiconducting carbon nanotube ink purified by a nonlinear conjugated copolymer
Xu, W., Dou, J., Zhao, J., Tan, H., Ye, J., Tange, M., Gao, W., Xu, W., Zhang, X., Guo, W., et al. (2016) · Nanoscale · doi:10.1039/c6nr00015k · Cited by 42
Phonon-derived ultrafast relaxation of spin-valley polarized states in MoS_{2}Preprint
Shin, D., Jin, H., & Park, N. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1704.00921 · Cited by 41
Direct writing of graphene patterns and devices on graphene oxide films by inkjet reduction
Su, Y., Jia, S., Du, J., Yuan, J., Liu, C., Ren, W., & Cheng, H. (2015) · Nano Research · doi:10.1007/s12274-015-0897-5 · Cited by 39
RF Characterization of Gigahertz Flexible Silicon Thin-Film Transistor on Plastic Substrates Under Bending Conditions
Qin, G., Seo, J., Zhang, Y., Zhou, H., Zhou, W., Wang, Y., Ma, J., & Ma, Z. (2013) · IEEE Electron Device Letters · doi:10.1109/led.2012.2231853 · Cited by 37
Switchable disposable passive RFID vapour sensors from inkjet printed electronic components integrated with PDMS as a stimulus responsive material
Belsey, K. E., Parry, A. V. S., Rumens, C. V., Ziai, M. A., Yeates, S. G., Batchelor, J. C., & Holder, S. J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05509e · Cited by 28
Solution-Processed Complementary Resistive Switching Arrays for Associative Memory
Smith, J. N., Chung, S., Jang, J., Biaou, C., & Subramanian, V. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2732920 · Cited by 21
Self-citation
Highly stable flexible printed organic thin-film transistor devices under high strain conditions using semiconducting polymers
Sekine, T., Fukuda, K., Kumaki, D., & Tokito, S. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.04dk10 · Cited by 17

A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Printable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312

See all 312

Authors: Chung, S., Cho, K., & Lee, T.
Venue: Advanced Science
Publisher: Wiley
Published: 2019-01-11
Volume: 6
Issue: 6
Pages: 1801445-1801445
ISSN: 2198-3844 (ISSN-L)
DOI: 10.1002/advs.201801445
OpenAlex: W2909145354
Cited by: 312
References: 157
FWCI: 14.10
Type: journal article
Language: en
Open access: gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Recent Progress in Inkjet‐Printed Thin‐Film Transistors

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources