The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Open accessAbstract
4D printing has attracted academic interest in the recent years because it endows static printed structures with dynamic properties with the change of time. The shapes, functionalities, or properties of the 4D printed objects could alter under various stimuli such as heat, light, electric, and magnetic field. Briefly, 4D printing is the development of 3D printing with the fourth dimension of time. Among the fabrication techniques that have been employed for 4D printing, the direct ink writing technique shows superiority due to its open source for various types of materials. Herein, the state‐of‐the‐art achievements about the topic of 4D printing through direct ink writing are summarized. The types of materials, printing strategies, actuated methods, and their potential applications are discussed in detail. To date, most efforts have been devoted to shape‐shifting materials, including shape memory polymers, hydrogels, and liquid crystal elastomers, showing great prospects in areas ranging from the biomedical field to robotics. Finally, the current challenges and outlook toward 4D printing based on direct ink writing are also pointed out to leave open a significant space for future innovation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A Thermally Re-mendable Cross-Linked Polymeric Material
Chen, X., Dam, M. A., Ono, K., Mal, A., Shen, H., Nutt, S. R., Sheran, K., & Wudl, F. (2002) · Science · doi:10.1126/science.1065879 · Cited by 2,645
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
Colombo, P., Mera, G., Riedel, R., & Sorarù, G. D. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03876.x · Cited by 1,887
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Self-citationZhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Shape memory polymers and their composites in aerospace applications: a review
Liu, Y., Du, H., Liu, L., & Leng, J. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/2/023001 · Cited by 1,056
Self-citationVoxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Fast liquid-crystal elastomer swims into the dark
Camacho-Lopez, M., Finkelmann, H., Palffy-Muhoray, P., & Shelley, M. (2004) · Nature Materials · doi:10.1038/nmat1118 · Cited by 1,007
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Xu, S., Yan, Z., Jang, K.-I., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M., McCracken, J., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 931
Self-citation3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Heat‐ or Water‐Driven Malleability in a Highly Recyclable Covalent Network Polymer
Taynton, P., Yu, K., Shoemaker, R. K., Jin, Y., Qi, H. J., & Zhang, W. (2014) · Advanced Materials · doi:10.1002/adma.201400317 · Cited by 890
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Self-Repairing Oxetane-Substituted Chitosan Polyurethane Networks
Ghosh, B., & Urban, M. W. (2009) · Science · doi:10.1126/science.1167391 · Cited by 713
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Liquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability
Yu, K., Shi, Q., Dunn, M. L., Wang, T., & Qi, H. J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602056 · Cited by 538
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 535
Self-citation4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
Shape memory polymer network with thermally distinct elasticity and plasticity
Zhao, Q., Zou, W., Luo, Y., & Xie, T. (2016) · Science Advances · doi:10.1126/sciadv.1501297 · Cited by 514
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Self-citation4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Untethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476
Recyclable 3D printing of vitrimer epoxy
Shi, Q., Yu, K., Kuang, X., Mu, X., Dunn, C. K., Dunn, M. L., Wang, T., & Jerry Qi, H. (2017) · Materials Horizons · doi:10.1039/c7mh00043j · Cited by 460
Lu, W., Le, X., Zhang, J., Huang, Y., & Chen, T. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00754f · Cited by 459
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Stereolithography of SiOC Ceramic Microcomponents
Zanchetta, E., Cattaldo, M., Franchin, G., Schwentenwein, M., Homa, J., Brusatin, G., & Colombo, P. (2016) · Advanced Materials · doi:10.1002/adma.201503470 · Cited by 432
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
3D Printing of Living Responsive Materials and Devices
Liu, X., Yuk, H., Lin, S., Parada, G. A., Tang, T., Tham, E., de la Fuente‐Nunez, C., Lu, T. K., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704821 · Cited by 393
Directed Colloidal Assembly of 3D Periodic Structures
Smay, J. E., Gratson, G. M., Shepherd, R. F., Cesarano, J., & Lewis, J. A. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020916)14:18<1279::aid-adma1279>3.0.co;2-a · Cited by 388
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Universal inverse design of surfaces with thin nematic elastomer sheets
Aharoni, H., Xia, Y., Zhang, X., Kamien, R. D., & Yang, S. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1804702115 · Cited by 326
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
Laser-assisted direct ink writing of planar and 3D metal architectures
Skylar-Scott, M. A., Gunasekaran, S., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1525131113 · Cited by 318
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
Cheng, Y., Chan, K. H., Wang, X.-Q., Ding, T., Li, T., Lu, X., & Ho, G. W. (2019) · ACS Nano · doi:10.1021/acsnano.9b06144 · Cited by 312
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Lei, Z., Wang, Q., & Wu, P. (2017) · Materials Horizons · doi:10.1039/c7mh00262a · Cited by 288
Lu, H.-F., Wang, M., Chen, X.-M., Lin, B.-P., & Yang, H. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06757 · Cited by 287
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Bao, M., Lou, X., Zhou, Q., Dong, W., Yuan, H., & Zhang, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405101k · Cited by 267
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
A Rapid and Efficient Self‐Healing Thermo‐Reversible Elastomer Crosslinked with Graphene Oxide
Wang, C., Liu, N., Allen, R., Tok, J. B. ‐., Wu, Y., Zhang, F., Chen, Y., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302962 · Cited by 247
Architected cellular ceramics with tailored stiffness via direct foam writing
Muth, J. T., Dixon, P. G., Woish, L., Gibson, L. J., & Lewis, J. A. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1616769114 · Cited by 242
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Development of rapid tooling using fused deposition modeling: a review
Boparai, K. S., Singh, R., & Singh, H. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0048 · Cited by 229
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Solvent Assisted Pressure-Free Surface Welding and Reprocessing of Malleable Epoxy Polymers
Shi, Q., Yu, K., Dunn, M. L., Wang, T., & Qi, H. J. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00858 · Cited by 211
Stimuli-responsive materials in additive manufacturing
Shafranek, R. T., Millik, S. C., Smith, P. T., Lee, C.-U., Boydston, A. J., & Nelson, A. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.002 · Cited by 210
Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
Lebel, L. L., Aïssa, B., Khakani, M. A. E., & Therriault, D. (2009) · Advanced Materials · doi:10.1002/adma.200902192 · Cited by 209
Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering
Miao, S., Cui, H., Nowicki, M., Xia, L., Zhou, X., Lee, S., Zhu, W., Sarkar, K., Zhang, Z., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800101 · Cited by 209
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Roach, D. J., Kuang, X., Yuan, C., Chen, K., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae96f · Cited by 208
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Chen, K., Kuang, X., Li, V., Kang, G., & Qi, H. J. (2018) · Soft Matter · doi:10.1039/c7sm02362f · Cited by 207
Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems
Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203
Electroactive Polymers as Artificial Muscles: A Review
Bar-Cohen, Y. (2002) · Journal of Spacecraft and Rockets · doi:10.2514/2.3902 · Cited by 195
Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04245 · Cited by 182
Self-citationHendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient
Zhang, C., Lu, X., Fei, G., Wang, Z., Xia, H., & Zhao, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18037 · Cited by 176
Magnetoactive liquid crystal elastomer nanocomposites
Kaiser, A., Winkler, M., Krause, S., Finkelmann, H., & Schmidt, A. M. (2009) · J. Mater. Chem. · doi:10.1039/b813120c · Cited by 167
Soft Tendril-Inspired Grippers: Shape Morphing of Programmable Polymer–Paper Bilayer Composites
Wang, W., Li, C., Cho, M., & Ahn, S.-H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18079 · Cited by 166
A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes
Pan, Y., Zhou, C., & Chen, Y. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4007465 · Cited by 164
Biodegradable Water-Based Polyurethane Shape Memory Elastomers for Bone Tissue Engineering
Wang, Y.-J., Jeng, U.-S., & Hsu, S.-H. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00091 · Cited by 163
High strain actuation liquid crystal elastomers via modulation of mesophase structure
Saed, M. O., Volpe, R. H., Traugutt, N. A., Visvanathan, R., Clark, N. A., & Yakacki, C. M. (2017) · Soft Matter · doi:10.1039/c7sm01380a · Cited by 160
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Guo, J., Zhang, R., Zhang, L., & Cao, X. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00957 · Cited by 159
Wang, X. S., Guo, X., Ye, J., Zheng, N., Kohli, P., Choi, D., Zhang, Y., Xie, Z., Zhang, Q., Luan, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201805615 · Cited by 152
Wan, X., Zhang, F., Liu, Y., & Leng, J. (2019) · Carbon · doi:10.1016/j.carbon.2019.08.047 · Cited by 147
Self-citationFerroelectric liquid‐crystalline elastomers
Brehmer, M., Zentel, R., Wagenblast, G., & Siemensmeyer, K. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950601 · Cited by 142
Salvekar, A. V., Huang, W., Xiao, R., Wong, Y. S., Venkatraman, S. S., Tay, K. H., & Shen, Z. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00539 · Cited by 135
Luo, Y., Lin, X., Chen, B., & Wei, X. (2019) · Biofabrication · doi:10.1088/1758-5090/ab39c5 · Cited by 135
Microstructured Actuation of Liquid Crystal Polymer Networks
Ge, F., & Zhao, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901890 · Cited by 133
3D-printing porosity: A new approach to creating elevated porosity materials and structures
Jakus, A. E., Geisendorfer, N. R., Lewis, P. L., & Shah, R. N. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.039 · Cited by 131
Shape-morphing composites with designed micro-architectures
Rodriguez, J. N., Zhu, C. Y., Duoss, E. B., Wilson, T. S., Spadaccini, C. M., & Lewicki, J. P. (2016) · Scientific Reports · doi:10.1038/srep27933 · Cited by 126
Liu, J., & To, A. C. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.05.003 · Cited by 123
Tough, Shape-Changing Materials: Crystallized Liquid Crystal Elastomers
Kim, H., Boothby, J. M., Ramachandran, S., Lee, C. D., & Ware, T. H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00567 · Cited by 118
Zhou, N., Liu, C., Lewis, J. A., & Ham, D. (2017) · Advanced Materials · doi:10.1002/adma.201605198 · Cited by 115
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Wang, Y., Miao, Y., Zhang, J., Wu, J., Kirk, T. B., Xu, J., Ma, D., & Xue, W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.025 · Cited by 114
Guo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 111
Additive Manufacturing of Catalytically Active Living Materials
Saha, A., Johnston, T. G., Shafranek, R. T., Goodman, C. J., Zalatan, J. G., Storti, D., Ganter, M. A., & Nelson, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02719 · Cited by 111
Topology-Optimized 4D Printing of a Soft Actuator
Zolfagharian, A., Denk, M., Bodaghi, M., Kouzani, A. Z., & Kaynak, A. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00137-z · Cited by 111
Chen, K., Zhang, L., Kuang, X., Li, V., Lei, M., Kang, G., Wang, Z. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903568 · Cited by 107
Curvature in nematic elastica responding to light and heat
Warner, M., Modes, C. D., & Corbett, D. (2010) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2010.0135 · Cited by 106
Li, N., Chen, G., Chen, W., Huang, J., Tian, J., Wan, X., He, M., & Zhang, H. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.030 · Cited by 104
Self-citationLevel Set Topology Optimization of Printed Active Composites
Maute, K. K., Tkachuk, A., Wu, J., Qi, H. J., Ding, Z., & Dunn, M. L. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030994 · Cited by 102
Li, N., Chen, W., Chen, G., & Tian, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.035 · Cited by 101
Zhang, Y., Yin, X., Zheng, M., Moorlag, C., Yang, J., & Wang, Z. L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12428k · Cited by 100
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 97
Wan, X., Wei, H., Zhang, F., Liu, Y., & Leng, J. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48177 · Cited by 89
Self-citationFerroelectric Liquid Crystalline Elastomers
Brehmer, M., & Zentel, R. (2011) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst429.pub2 · Cited by 87
Mu, Q., Dunn, C. K., Wang, L., Dunn, M. L., Qi, H. J., & Wang, T. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa5cca · Cited by 84
3D printing of complex origami assemblages for reconfigurable structures
Zhao, Z., Kuang, X., Wu, J., Zhang, Q., Paulino, G. H., Qi, H. J., & Fang, D. (2018) · Soft Matter · doi:10.1039/c8sm01341a · Cited by 80
Ring Shuttling Controls Macroscopic Motion in a Three‐Dimensional Printed Polyrotaxane Monolith
Lin, Q., Hou, X. L., & Ke, C. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201612440 · Cited by 78
4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid
Uchida, T., & Onoe, H. (2019) · Micromachines · doi:10.3390/mi10070433 · Cited by 73
Polyelectrolyte Soft Actuators: 3D Printed Chitosan and Cast Gelatin
Zolfagharian, A., Kaynak, A., Khoo, S., & Kouzani, A. Z. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0054 · Cited by 72
Dai, W., Guo, H., Gao, B., Ruan, M., Xu, L., Wu, J., Kirk, T. B., Xu, J., Ma, D., & Xue, W. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.078 · Cited by 67
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 66
Catalytically Initiated Gel-in-Gel Printing of Composite Hydrogels
Basu, A., Saha, A., Goodman, C. J., Shafranek, R. T., & Nelson, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14177 · Cited by 62
Direct Ink Writing of Wearable Thermoresponsive Supercapacitors with rGO/CNT Composite Electrodes
Jiang, Y., Cheng, M., Shahbazian‐Yassar, R., & Pan, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900691 · Cited by 53
McCracken, J. M., Rauzan, B. M., Kjellman, J. C. E., Su, H., Rogers, S. A., & Nuzzo, R. G. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806723 · Cited by 52
Lin, Q., Li, L., Tang, M., Hou, X. L., & Ke, C. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02834f · Cited by 47
3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices
Bakarich, S. E., Gorkin, R. A., III, Naficy, S., Gately, R. D., Panhuis, M. I. H., & Spinks, G. M. (2015) · MRS Advances · doi:10.1557/adv.2015.9 · Cited by 40
Mechanics of biomimetic 4D printed structures
van Rees, W. M., Matsumoto, E. A., Gladman, A. S., et al. (2018) · Soft Matter · doi:10.1039/c8sm00990b · Cited by 39
Mu, Q., Lei, M., Roach, D. J., Dunn, C. K., Kuang, X., Yuan, C., Wang, T., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae11f · Cited by 25
Three-dimensional circuit fabrication using four-dimensional printing and direct ink writing
Deng, D., Jain, A., Yodvanich, N., Araujo, A., & Chen, Y. (2016) · International Symposium on Flexible Automation (ISFA) · doi:10.1109/isfa.2016.7790176 · Cited by 15
Wang, R., Yang, W., Gao, S., Ju, X., Zhu, P., Li, B., & Li, Q. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc05759a · Cited by 13
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Metadata
- Authors
- Wan, X., Luo, L., Liu, Y., & Leng, J.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2020-06-29
- Volume
- 7
- Issue
- 16
- Pages
- 2001000-2001000
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3039020356
- Cited by
- 337
- References
- 143
- FWCI
- 20.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.