The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Abstract
Over the last 40 years, metallic lithium as an anode material has been of great interest owing to its high energy density. However, dendritic lithium growth causes serious safety issues. Awareness and understanding of the Li deposition and stripping processes have grown rapidly especially in recent years, and consequently, there have been many attempts to suppress the Li dendrites. Recent developments that have modified the electrolytes and the Li anode in order to inhibit the growth of Li dendrite and improve cycling performance are summarized. It has been shown that current density, solid‐electrolyte interphase (SEI) film, Li+ transference number, and shear modulus have significant impact on the growth behavior and the Coulombic efficiency. Various methods have been introduced to increase the surface area of the Li anode, enhance Li+ conductivity, form stable SEI film, and improve mechanical strength of electrolytes. These approaches are discussed in details, and the perspectives regarding the future use of Li anode are also outlined. It is hoped that this review will facilitate the future development of Li metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Metal–air batteries: from oxygen reduction electrochemistry to cathode catalysts
Cheng, F., & Chen, J. (2012) · Chemical Society Reviews · doi:10.1039/c1cs15228a · Cited by 2,677
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Self-citationAurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Ceramic and polymeric solid electrolytes for lithium-ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.01.076 · Cited by 1,172
The Lithium–Oxygen Battery with Ether‐Based Electrolytes
Freunberger, S. A., Chen, Y., Drewett, N. E., Hardwick, L. J., Bardé, F., & Bruce, P. G. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102357 · Cited by 1,099
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Nonaqueous Li–Air Batteries: A Status Report
Luntz, A. C., & McCloskey, B. D. (2014) · Chemical Reviews · doi:10.1021/cr500054y · Cited by 925
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Self-citationWenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Ionic‐Liquid‐Based Polymer Electrolytes for Battery Applications
Osada, I., de Vries, H., Scrosati, B., & Passerini, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504971 · Cited by 800
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Pyrite FeS2for high-rate and long-life rechargeable sodium batteries
Hu, Z., Zhu, Z., Cheng, F., Zhang, K., Wang, J., Chen, C., & Chen, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03759f · Cited by 686
Self-citationElastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)
Yu, S., Schmidt, R. D., Garcia-Mendez, R., Herbert, E., Dudney, N. J., Wolfenstine, J. B., Sakamoto, J., & Siegel, D. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03854 · Cited by 662
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Wenzel, S., Leichtweiss, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Xu, J.-J., Wang, Z.-L., Xu, D., Zhang, L.-L., & Zhang, X.-B. (2013) · Nature Communications · doi:10.1038/ncomms3438 · Cited by 562
Sharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J., & Sakamoto, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.053 · Cited by 536
Xu, J., Xu, D., Wang, Z., Wang, H., Zhang, L., & Zhang, X. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201210057 · Cited by 513
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
7Li MRI of Li batteries reveals location of microstructural lithium
Chandrashekar, S., Trease, N. M., Chang, H. J., Du, L.-S., Grey, C. P., & Jerschow, A. (2012) · Nature Materials · doi:10.1038/nmat3246 · Cited by 499
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
Li6ALa2Ta2O12 (A = Sr, Ba): Novel Garnet‐Like Oxides for Fast Lithium Ion Conduction
Thangadurai, V., & Weppner, W. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400044 · Cited by 472
A critical review on lithium–air battery electrolytes
Balaish, M., Kraytsberg, A., & Ein-Eli, Y. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp54165g · Cited by 454
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Lithium-air batteries using hydrophobic room temperature ionic liquid electrolyte
Kuboki, T., Okuyama, T., Ohsaki, T., & Takami, N. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.082 · Cited by 445
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402953 · Cited by 412
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities
Geng, D., Ding, N., Hor, T. S. A., Chien, S. W., Liu, Z., Wuu, D., Sun, X., & Zong, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502164 · Cited by 384
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Xu, J.-J., Wang, Z.-L., Xu, D., Meng, F.-Z., & Zhang, X.-B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42934b · Cited by 362
Effects of Some Organic Additives on Lithium Deposition in Propylene Carbonate
Mogi, R., Inaba, M., Jeong, S.-K., Iriyama, Y., Abe, T., & Ogumi, Z. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1516770 · Cited by 360
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
A Rechargeable Li–O2 Battery Using a Lithium Nitrate/N,N-Dimethylacetamide Electrolyte
Walker, W., Giordani, V., Uddin, J., Bryantsev, V. S., Chase, G. V., & Addison, D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311518s · Cited by 355
Kim, S.-P., Duin, A. C. T. V., & Shenoy, V. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.061 · Cited by 343
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
Self-citationHuang, W., Zhu, Z., Wang, L., Wang, S., Li, H. M., Tao, Z., Shi, J., Guan, L., & Chen, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302586 · Cited by 330
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Self-citationLithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Lu, Y., Das, S. K., Moganty, S. S., & Archer, L. A. (2012) · Advanced Materials · doi:10.1002/adma.201201953 · Cited by 316
Flexible lithium–oxygen battery based on a recoverable cathode
Liu, Q.-C., Xu, J.-J., Xu, D., & Zhang, X.-B. (2015) · Nature Communications · doi:10.1038/ncomms8892 · Cited by 310
Zhamu, A., Chen, G., Liu, C., Neff, D., Fang, Q., Yu, Z., Xiong, W., Wang, Y., Wang, X., & Jang, B. Z. (2012) · Energy Environ. Sci. · doi:10.1039/c2ee02911a · Cited by 300
Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries
Wu, M., Wen, Z., Liu, Y., Wang, X., & Huang, L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.035 · Cited by 298
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
In Situ and Quantitative Characterization of Solid Electrolyte Interphases
Cresce, A. V., Russell, S. M., Baker, D. R., Gaskell, K. J., & Xu, K. (2014) · Nano Letters · doi:10.1021/nl404471v · Cited by 286
Interface reactions between LiPON and lithium studied by in-situ X-ray photoemission
Schwöbel, A., Hausbrand, R., & Jaegermann, W. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2014.10.017 · Cited by 267
Effect of Ion Distribution on Conductivity of Block Copolymer Electrolytes
Gomez, E. D., Panday, A., Feng, E. H., Chen, V., Stone, G. M., Minor, A. M., Kisielowski, C., Downing, K. H., Borodin, O., Smith, G. D., et al. (2009) · Nano Letters · doi:10.1021/nl900091n · Cited by 263
Aurbach, D., Zaban, A., Gofer, Y., Ely, Y. E., Weissman, I., Chusid, O., & Abramson, O. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02044-4 · Cited by 262
Assary, R. S., Lu, J., Du, P., Luo, X., Zhang, X., Ren, Y., Curtiss, L. A., & Amine, K. (2013) · ChemSusChem · doi:10.1002/cssc.201200810 · Cited by 254
Rechargeable Lithium-Iodine Batteries with Iodine/Nanoporous Carbon Cathode
Zhao, Q., Lu, Y., Zhu, Z., Tao, Z., & Chen, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02116 · Cited by 246
Lee, D. J., Lee, H., Kim, Y., Park, J., & Kim, H. (2016) · Advanced Materials · doi:10.1002/adma.201503169 · Cited by 244
Zhang, K., Zhao, Q., Tao, Z., & Chen, J. (2013) · Nano Research · doi:10.1007/s12274-012-0279-1 · Cited by 241
Self-citationYadegari, H., Sun, Q., & Sun, X. (2016) · Advanced Materials · doi:10.1002/adma.201504373 · Cited by 232
Sacci, R. L., Black, J. M., Balke, N., Dudney, N. J., More, K. L., & Unocic, R. R. (2015) · Nano Letters · doi:10.1021/nl5048626 · Cited by 227
Gunceler, D., Letchworth-Weaver, K., Sundararaman, R., Schwarz, K. A., & Arias, T. A. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/7/074005 · Cited by 220
Choi, R., Jung, J., Kim, G., Song, K., Kim, Y.-I., Jung, S. C., Han, Y.-K., Song, H., & Kang, Y.-M. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43437k · Cited by 214
Self-citationWandt, J., Marino, C., Gasteiger, H. A., Jakes, P., Eichel, R.-A., & Granwehr, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02730b · Cited by 194
Protection of lithium metal surfaces using tetraethoxysilane
Umeda, G. A., Menke, E., Richard, M., Stamm, K. L., Wudl, F., & Dunn, B. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02305a · Cited by 187
Sulfur Nanodots Electrodeposited on Ni Foam as High-Performance Cathode for Li–S Batteries
Zhao, Q., Hu, X., Zhang, K., Zhang, N., Hu, Y., & Chen, J. (2015) · Nano Letters · doi:10.1021/nl504263m · Cited by 185
Self-citationRechargeable quasi-solid state lithium battery with organic crystalline cathode
Hanyu, Y., & Honma, I. (2012) · Scientific Reports · doi:10.1038/srep00453 · Cited by 183
Li, L., Zhou, S., Han, H., Li, H., Nie, J., Armand, M., Zhou, Z., & Huang, X. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3514705 · Cited by 181
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Mechanical characterization of LiPON films using nanoindentation
Herbert, E. G., Tenhaeff, W. E., Dudney, N. J., & Pharr, G. M. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.07.068 · Cited by 163
A high-rate and long cycle life solid-state lithium–air battery
Zhu, X., Zhao, T. S., Wei, Z., Tan, P., & An, L. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02867a · Cited by 155
Ultrasmall Li2S Nanoparticles Anchored in Graphene Nanosheets for High-Energy Lithium-Ion Batteries
Zhang, K., Wang, L., Hu, Z., Cheng, F., & Chen, J. (2014) · Scientific Reports · doi:10.1038/srep06467 · Cited by 152
Self-citationA Moisture‐ and Oxygen‐Impermeable Separator for Aprotic Li‐O2 Batteries
Kim, B. G., Kim, J., Min, J., Lee, Y., Choi, J., Choi, J., Jang, M. C., Freunberger, S. A., Choi, J. W., & Choi, J. W. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504437 · Cited by 151
Thermodynamic Properties of Block Copolymer Electrolytes Containing Imidazolium and Lithium Salts
Wanakule, N. S., Virgili, J. M., Teran, A. A., Wang, Z., & Balsara, N. P. (2010) · Macromolecules · doi:10.1021/ma1013786 · Cited by 142
Ota, H., Sakata, Y., Otake, Y., Shima, K., Ue, M., & Yamaki, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1798411 · Cited by 138
Hu, J. J., Long, G., Liu, S. H., Li, G., & Gao, X. (2014) · Chemical Communications · doi:10.1039/c4cc06666a · Cited by 128
Composite protective layer for Li metal anode in high-performance lithium–oxygen batteries
Lee, D. J., Lee, H., Song, J., Ryou, M., Lee, Y. M., Kim, H., & Park, J.-K. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.12.022 · Cited by 123
Cao, L., Lv, F., Liu, Y., Wang, W., Huo, Y., Fu, X., Sun, R., & Lu, Z. (2014) · Chemical Communications · doi:10.1039/c4cc09281c · Cited by 123
Zhuang, G., Yang, H., Blizanac, B. B., & Ross, P. N. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1979327 · Cited by 118
Self-doped block copolymer electrolytes for solid-state, rechargeable lithium batteries
Sadoway, D. R., Huang, B., Trapa, P. E., Soo, P. P., Bannerjee, P., & Mayes, A. M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00642-5 · Cited by 107
Long Cycle‐Life Secondary Lithium Cells Utilizing Tetrahydrofuran
Abraham, K. M., Foos, J. S., & Goldman, J. L. (1984) · Journal of The Electrochemical Society · doi:10.1149/1.2116049 · Cited by 95
ac imepedance behaviour of lithium electrode in organic electrolyte solutions containing additives
Morita, M., Aoki, S., & Matsuda, Y. (1992) · Electrochimica Acta · doi:10.1016/0013-4686(92)80020-m · Cited by 84
Shen, C., Ge, M., Zhang, A., Fang, X., Liu, Y., Rong, J., & Zhou, C. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.013 · Cited by 76
Zheng, Y., Song, K., Jung, J., Li, C., Heo, Y., Park, M., Cho, M., Kang, Y., & Cho, K. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00056 · Cited by 62
Self-citationAgyeman, D. A., Song, K., Kang, S. H., Jo, M. R., Cho, E., & Kang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05426e · Cited by 53
Self-citationPeng, S., Hu, Y., Li, L., Han, X., Cheng, F., Srinivasan, M., Yan, Q., Ramakrishna, S., & Chen, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.03.021 · Cited by 50
Kang, S. J., Mori, T., Suk, J., Kim, D. W., Kang, Y., Wilcke, W. W., & Kim, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01314j · Cited by 49
Self-citationNanostructured Block Copolymer Dry Electrolyte
Ghosh, A., & Kofinas, P. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2901905 · Cited by 45
Lithium deposit morphology from polymer electrolytes
Matsui, T., & Takeyama, K. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00158-b · Cited by 43
Zhang, T., Imanishi, N., Hirano, A., Takeda, Y., & Yamamoto, O. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/1.3545964 · Cited by 41
Jung, J., Song, K., Bae, Y., Choi, S., Park, M., Cho, E., Kang, K., & Kang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.09.011 · Cited by 32
Self-citationMore details on the new LiMnO2 rechargeable battery technology developed at Tadiran
Dan, P., Mengeritsky, E., Aurbach, D., Weissman, I., & Zinigrad, E. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02591-3 · Cited by 29
Effect of a novel amphipathic ionic liquid on lithium deposition in gel polymer electrolytes
Choi, N., Koo, B., Yeon, J.-T., Lee, K. T., & Kim, D. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.06.058 · Cited by 29
Song, K., Agyeman, D. A., Jung, J., Jo, M. R., Yang, J., & Kang, Y. (2015) · Israel Journal of Chemistry · doi:10.1002/ijch.201400089 · Cited by 25
Self-citation
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Metadata
- Authors
- Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-07-27
- Volume
- 6
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2496932484
- Cited by
- 345
- References
- 119
- FWCI
- 25.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.