Cited by 267

The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.

Interface issues of lithium metal anode for high‐energy batteries: Challenges, strategies, and perspectives

Open access

Han, Yiyao, Liu, Bo, Xiao, Zhen, Zhang, Wenkui, Wang, Xiuli, Pan, Guoxiang, Xia, Yang, Xia, Xinhui, Tu, Jiangping·2021·InfoMat

DOI 10.1002/inf2.12166

Open this paper in CoChat — free account

Abstract

Lithium (Li) metal is considered as one of the most promising anode materials for next‐generation high‐energy‐density storage systems. However, the practical application of Li metal anode is hindered by interfacial instability and air instability due to the highly reactivity of Li metal. Unstable interface in Li metal batteries (LMBs) directly dictates Li dendrite growth, “dead Li” and low Coulombic efficiency, resulting in inferior electrochemical performance of LMBs and even safety issues. In addition, its sensitivity to ambient air leads to the severe corrosion of Li metal anode, high requirements of production and storage, and increased manufacturing cost. Plenty of efforts in recent years have overcome many bottlenecks in these fields and hastened the practical applications of high‐energy‐density LMBs. In this review, we focus on emerging methods of these two aspects to fulfill a stable and low cost electrode. In this perspective, design artificial solid electrolyte interphase (SEI) layers, construct three‐dimensional conductive current collectors, optimize electrolytes, employ solid‐state electrolytes, and modify separators are summarized to be propitious to ameliorate interfacial stability. Meanwhile, ex situ/in situ formed protective layers are highlighted in favor of heightening air stability. Finally, several possible directions for the future research on advanced Li metal anode are addressed.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/inf2.12166

Cites

74 of 74 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
PEO/garnet composite electrolytes for solid-state lithium batteries: From “ceramic-in-polymer” to “polymer-in-ceramic”
Chen, L., Li, Y., Li, S.-P., Fan, L.-Z., Nan, C.-W., & Goodenough, J. B. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Self-citation
High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Dendrite‐Free Lithium Deposition Induced by Uniformly Distributed Lithium Ions for Efficient Lithium Metal Batteries
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect
Wang, Q., Jiang, L., Yu, Y., & Sun, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.035 · Cited by 915
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Electrolyte Additives for Lithium Metal Anodes and Rechargeable Lithium Metal Batteries: Progress and Perspectives
Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712702 · Cited by 774
High-energy lithium metal pouch cells with limited anode swelling and long stable cycles
Niu, C., Lee, H., Chen, S., Li, Q., Du, J., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., & Liu, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0390-6 · Cited by 732
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
The role of nanotechnology in the development of battery materials for electric vehicles
Lu, J., Chen, Z., Ma, Z., Pan, F., Curtiss, L. A., & Amine, K. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.207 · Cited by 700
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Self-citation
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries
Huo, H., Chen, Y., Luo, J., Yang, X., Guo, X., & Sun, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201804004 · Cited by 579
Self‐Suppression of Lithium Dendrite in All‐Solid‐State Lithium Metal Batteries with Poly(vinylidene difluoride)‐Based Solid Electrolytes
Zhang, X., Wang, S., Xue, C., Xin, C., Lin, Y., Shen, Y., Li, L., & Nan, C. (2019) · Advanced Materials · doi:10.1002/adma.201806082 · Cited by 551
Uniform Lithium Nucleation/Growth Induced by Lightweight Nitrogen‐Doped Graphitic Carbon Foams for High‐Performance Lithium Metal Anodes
Liu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Fast ion transport at solid–solid interfaces in hybrid battery anodes
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2018) · Nature Energy · doi:10.1038/s41560-018-0096-1 · Cited by 536
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
An Armored Mixed Conductor Interphase on a Dendrite‐Free Lithium‐Metal Anode
Yan, C., Cheng, X., Yao, Y., Shen, X., Li, B., Li, W., Zhang, R., Huang, J., Li, H., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201804461 · Cited by 427
Langmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries
Kim, M. S., Ryu, J.-H., Deepika, Lim, Y. R., Nah, I. W., Lee, K.-R., Archer, L. A., & Il Cho, W. (2018) · Nature Energy · doi:10.1038/s41560-018-0237-6 · Cited by 417
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
Two-dimensional molecular brush-functionalized porous bilayer composite separators toward ultrastable high-current density lithium metal anodes
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Rechargeable solid-state lithium metal batteries with vertically aligned ceramic nanoparticle/polymer composite electrolyte
Wang, X., Zhai, H., Qie, B., Cheng, Q., Li, A., Borovilas, J., Xu, B., Shi, C., Jin, T., Liao, X., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.051 · Cited by 364
Self-citation
A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries
Yu, L., Chen, S., Lee, H., Zhang, L., Engelhard, M. H., Li, Q., Jiao, S., Liu, J., Xu, W., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00935 · Cited by 363
Guiding Uniform Li Plating/Stripping through Lithium–Aluminum Alloying Medium for Long‐Life Li Metal Batteries
Ye, H., Zheng, Z., Yao, H., Liu, S., Zuo, T., Wu, X., Yin, Y., Li, N., Gu, J., Cao, F., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811955 · Cited by 360
Crumpled Graphene Balls Stabilized Dendrite-free Lithium Metal Anodes
Liu, S., Wang, A., Li, Q., Wu, J., Chiou, K., Huang, J., & Luo, J. (2018) · Joule · doi:10.1016/j.joule.2017.11.004 · Cited by 347
Challenges and issues facing lithium metal for solid-state rechargeable batteries
Mauger, A., Armand, M. B., Julien, C. M., & Zaghib, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.018 · Cited by 333
High‐Fluorinated Electrolytes for Li–S Batteries
Zheng, J., Ji, G., Fan, X., Chen, J., Li, Q., Wang, H., Yang, Y., DeMella, K. C., Raghavan, S. R., & Wang, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803774 · Cited by 331
High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture
Hitz, G. T., McOwen, D. W., Zhang, L., Ma, Z., Fu, Z., Wen, Y., Gong, Y., Dai, J., Hamann, T. R., Hu, L., et al. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.004 · Cited by 318
Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries
Li, S., Zhang, W., Wu, Q., Fan, L., Wang, X., Wang, X., Shen, Z., He, Y., & Lu, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202004853 · Cited by 318
Self-citation
Lithiophilic 3D Nanoporous Nitrogen‐Doped Graphene for Dendrite‐Free and Ultrahigh‐Rate Lithium‐Metal Anodes
Huang, G., Han, J., Zhang, F., Wang, Z., Kashani, H., Watanabe, K., & Chen, M. (2019) · Advanced Materials · doi:10.1002/adma.201805334 · Cited by 313
Countersolvent Electrolytes for Lithium‐Metal Batteries
Piao, N., Ji, X., Xu, H., Fan, X., Chen, L., Liu, S., Garaga, M. N., Greenbaum, S. G., Wang, L., Wang, C., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903568 · Cited by 297
Transient Behavior of the Metal Interface in Lithium Metal–Garnet Batteries
Fu, K. (., Gong, Y., Fu, Z., Xie, H., Yao, Y., Liu, B., Carter, M., Wachsman, E., & Hu, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708637 · Cited by 290
Self-citation
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive
Huang, Z., Ren, J., Zhang, W., Xie, M., Li, Y., Sun, D., Shen, Y., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201803270 · Cited by 275
Self-citation
Tape‐Casting Li0.34La0.56TiO3 Ceramic Electrolyte Films Permit High Energy Density of Lithium‐Metal Batteries
Jiang, Z., Wang, S., Chen, X., Yang, W., Yao, X., Hu, X., Han, Q., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201906221 · Cited by 266
Enabling High‐Voltage Lithium Metal Batteries by Manipulating Solvation Structure in Ester Electrolyte
Jie, Y., Liu, X., Lei, Z., Wang, S., Chen, Y., Huang, F., Cao, R., Zhang, G., & Jiao, S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201914250 · Cited by 246
In Situ Preparation of Thin and Rigid COF Film on Li Anode as Artificial Solid Electrolyte Interphase Layer Resisting Li Dendrite Puncture
Chen, D., Huang, S., Zhong, L., Wang, S., Xiao, M., Han, D., & Meng, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907717 · Cited by 239
Developing a “Water‐Defendable” and “Dendrite‐Free” Lithium‐Metal Anode Using a Simple and Promising GeCl4 Pretreatment Method
Liao, K., Wu, S., Mu, X., Lu, Q., Han, M., He, P., Shao, Z., & Zhou, H. (2018) · Advanced Materials · doi:10.1002/adma.201705711 · Cited by 226
Biomacromolecules enabled dendrite-free lithium metal battery and its origin revealed by cryo-electron microscopy
Ju, Z., Nai, J., Wang, Y., Liu, T., Zheng, J., Yuan, H., Sheng, O., Jin, C., Zhang, W., Jin, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14358-1 · Cited by 224
Self-citation
High‐Power Lithium Metal Batteries Enabled by High‐Concentration Acetonitrile‐Based Electrolytes with Vinylene Carbonate Additive
Peng, Z., Cao, X., Gao, P., Jia, H., Ren, X., Roy, S., Li, Z., Zhu, Y., Xie, W., Liu, D., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001285 · Cited by 217
Lithium Silicide Surface Enrichment: A Solution to Lithium Metal Battery
Tang, W., Yin, X., Kang, S., Chen, Z., Tian, B., Teo, S. L., Wang, X., Chi, X., Loh, K. P., Lee, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201801745 · Cited by 213
Self-citation
Ultralight Layer‐by‐Layer Self‐Assembled MoS 2 ‐Polymer Modified Separator for Simultaneously Trapping Polysulfides and Suppressing Lithium Dendrites
Wu, J., Zeng, H., Li, X., Xiao, X. H., Liao, Y., Xue, Z., Ye, Y., & Xie, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802430 · Cited by 213
Surface engineering of commercial Ni foams for stable Li metal anodes
Ke, X., Liang, Y., Ou, L., Liu, H., Chen, Y., Wu, W., Cheng, Y., Guo, Z., Lai, Y., Liu, P., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.003 · Cited by 205
Liquid‐Phase Electrochemical Scanning Electron Microscopy for In Situ Investigation of Lithium Dendrite Growth and Dissolution
Rong, G., Zhang, X., Zhao, W. J., Qiu, Y., Liu, M., Ye, F., Xu, Y., Chen, J., Hou, Y., Li, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606187 · Cited by 203
Nitriding‐Interface‐Regulated Lithium Plating Enables Flame‐Retardant Electrolytes for High‐Voltage Lithium Metal Batteries
Tan, S., Yue, J., Hu, X., Shen, Z., Wang, W., Li, J., Zuo, T., Duan, H., Xiao, Y., Yin, Y., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201903466 · Cited by 202
A 3D and Stable Lithium Anode for High‐Performance Lithium–Iodine Batteries
Li, K., Hu, Z., Ma, J., Chen, S., Mu, D., & Zhang, J. (2019) · Advanced Materials · doi:10.1002/adma.201902399 · Cited by 196
In Situ Construction of Stable Tissue‐Directed/Reinforced Bifunctional Separator/Protection Film on Lithium Anode for Lithium–Oxygen Batteries
Xu, J., Liu, Q., Yu, Y., Wang, J., Yan, J., & Zhang, X. (2017) · Advanced Materials · doi:10.1002/adma.201606552 · Cited by 193
A Lightweight 3D Cu Nanowire Network with Phosphidation Gradient as Current Collector for High‐Density Nucleation and Stable Deposition of Lithium
Zhang, C., Lyu, R., Lv, W., Li, H., Jiang, W., Li, J., Gu, S., Zhou, G., Huang, Z., Zhang, Y., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904991 · Cited by 184
Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport
Choudhury, S., Tu, Z., Stalin, S., Vu, D., Fawole, K., Gunceler, D., Sundararaman, R., & Archer, L. A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707754 · Cited by 183
Ultrathin Bilayer of Graphite/SiO2 as Solid Interface for Reviving Li Metal Anode
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Wu, F., Chaudhary, A., Ghimire, N., Zhou, B., Zhang, W., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901486 · Cited by 182
Self-citation
In Situ Solid Electrolyte Interphase from Spray Quenching on Molten Li: A New Way to Construct High‐Performance Lithium‐Metal Anodes
Liu, S., Xia, X., Deng, S., Xie, D., Yao, Z., Zhang, L., Zhang, S., Wang, X., & Tu, J. (2019) · Advanced Materials · doi:10.1002/adma.201806470 · Cited by 177
Self-citation
Nacre‐Inspired Composite Electrolytes for Load‐Bearing Solid‐State Lithium‐Metal Batteries
Li, A., Liao, X., Zhang, H., Shi, L., Wang, P., Cheng, Q., Borovilas, J., Li, Z., Huang, W., Fu, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905517 · Cited by 162
An Air‐Stable and Dendrite‐Free Li Anode for Highly Stable All‐Solid‐State Sulfide‐Based Li Batteries
Liang, J., Li, X., Zhao, Y., Goncharova, L. V., Li, W., Adair, K. R., Banis, M. N., Hu, Y., Sham, T., Huang, H., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902125 · Cited by 157
Novel Organophosphate‐Derived Dual‐Layered Interface Enabling Air‐Stable and Dendrite‐Free Lithium Metal Anode
Liu, X., Liu, J., Qian, T., Chen, H., & Yan, C. (2019) · Advanced Materials · doi:10.1002/adma.201902724 · Cited by 139
Ceramic–Salt Composite Electrolytes from Cold Sintering
Lee, W., Lyon, C. K., Seo, J., Lopez-Hallman, R., Leng, Y., Wang, C., Hickner, M. A., Randall, C. A., & Gomez, E. D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807872 · Cited by 131
A Nacre‐Inspired Separator Coating for Impact‐Tolerant Lithium Batteries
Song, Y., Wu, K., Zhang, T., Lu, L., Guan, Y., Zhou, F., Wang, X., Yin, Y., Tan, Y., Li, F., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905711 · Cited by 115
Self-citation
Unprecedented Improvement of Single Li‐Ion Conductive Solid Polymer Electrolyte Through Salt Additive
Martínez‐Ibáñez, M., Sánchez‐Díez, E., Qiao, L., Zhang, Y., Júdez, X., Santiago, A., Aldalur, I., Carrasco, J., Zhu, H., Forsyth, M., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000455 · Cited by 99
Suppressing Li Metal Dendrites Through a Solid Li‐Ion Backup Layer
Salvatierra, R. V., López‐Silva, G. A., Jalilov, A. S., Yoon, J., Wu, G., Tsai, A., & Tour, J. M. (2018) · Advanced Materials · doi:10.1002/adma.201803869 · Cited by 84
An air-stable and waterproof lithium metal anode enabled by wax composite packaging
Zhang, Y., Lv, W. Z., Huang, Z., Zhou, G., Deng, Y., Zhang, J., Zhang, C., Hao, B., Qi, Q., He, Y., et al. (2019) · 中国科学通报：英文版 · doi:10.1016/j.scib.2019.05.025 · Cited by 74
A Li-dual carbon composite as stable anode material for Li batteries
Guo, F., Wang, Y., Kang, T., Liu, C., Shen, Y., Lu, W. M., Wu, X., & Chen, L. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.03.018 · Cited by 68
A functional SrF 2 coated separator enabling a robust and dendrite-free solid electrolyte interphase on a lithium metal anode
Li, X., Liu, Y., Pan, Y., Wang, M., Chen, J., Xu, H., Huang, Y., Lau, W., Shan, A., Zheng, J., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06908a · Cited by 59
A highly stable host for lithium metal anode enabled by Li9Al4-Li3N-AlN structure
Peng, Z., Ren, F., Yang, S., Wang, M., Sun, J., Wang, D., Xu, W., & Zhang, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.02.033 · Cited by 51
A waterborne superLEphilic and thermostable separator based on natural clay nanorods for high-voltage lithium-ion batteries
Yang, Y., Wang, W., & Zhang, J. (2020) · Materials Today Energy · doi:10.1016/j.mtener.2020.100420 · Cited by 47
Trimethylsilyl azide (C 3 H 9 N 3 Si): a highly efficient additive for tailoring fluoroethylene carbonate (FEC) based electrolytes for Li-metal batteries
Park, S.-J., Hwang, J., & Sun, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03713f · Cited by 44
Efficiently suppressing lithium dendrites on atomic level by ultrafiltration membrane of graphdiyne
Shang, H., Zuo, Z., Dong, X., Wang, F., Lu, F., Zheng, H., Li, K., & Li, Y.-L. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.09.008 · Cited by 29
Aggressive electrolyte poisons and multifunctional fluids comprised of diols and diamines for emergency shutdown of lithium-ion batteries
Noelle, D. J., Shi, Y., Wang, M., Le, A. V., & Qiao, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.068 · Cited by 18

A MOF‐Derivative Decorated Hierarchical Porous Host Enabling Ultrahigh Rates and Superior Long‐Term Cycling of Dendrite‐Free Zn Metal Anodes
Xue, P., Guo, C., Li, L., Li, H., Luo, D., Tan, L., & Chen, Z. (2022) · Advanced Materials · doi:10.1002/adma.202110047 · Cited by 259
Status and perspectives of hierarchical porous carbon materials in terms of high‐performance lithium–sulfur batteries
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253

See all 267

Authors: Han, Y., Liu, B., Xiao, Z., Zhang, W., Wang, X., Pan, G., Xia, Y., Xia, X., & Tu, J.
Venue: InfoMat
Publisher: Wiley
Published: 2021-01-15
Volume: 3
Issue: 2
Pages: 155-174
ISSN: 2567-3165 (ISSN-L)
DOI: 10.1002/inf2.12166
OpenAlex: W3124865101
Cited by: 267
References: 74
FWCI: 16.13
Type: journal article
Language: en
Open access: gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Interface issues of lithium metal anode for high‐energy batteries: Challenges, strategies, and perspectives

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources