3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Open accessThe DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Abstract
Additive manufacturing, also known as 3D printing, has emerged over the past 3 decades as a disruptive technology for rapid prototyping and manufacturing. Vat polymerization, powder bed fusion, material extrusion, and binder jetting are distinct technologies of additive manufacturing, which have been used in a wide variety of fields, including biomedical research and tissue engineering. The ability to print biocompatible, patient-specific geometries with controlled macro- and micro-pores, and to incorporate cells, drugs and proteins has made 3D-printing ideal for orthopaedic applications, such as bone grafting. Herein, we performed a systematic review examining the fabrication of calcium phosphate (CaP) ceramics by 3D printing, their biocompatibility in vitro, and their bone regenerative potential in vivo, as well as their use in localized delivery of bioactive molecules or cells. Understanding the advantages and limitations of the different 3D printing approaches, CaP materials, and bioactive additives through critical evaluation of in vitro and in vivo evidence of efficacy is essential for developing new classes of bone graft substitutes that can perform as well as autografts and allografts or even surpass the performance of these clinical standards.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 146
Retracted3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Bose, S., & Tarafder, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.017 · Cited by 958
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Self-citationHandbook of Biomaterial Properties
Black, J. T. (1998) · Springer eBooks · doi:10.1007/978-1-4615-5801-9 · Cited by 734
Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo
Lam, C. X. F., Hutmacher, D. W., Schantz, J., Woodruff, M. A., & Teoh, S. H. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32052 · Cited by 599
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Bone regeneration: molecular and cellular interactions with calcium phosphate ceramics.
Barrère, F., van Blitterswijk, C., & de Groot, K. (2006) · PubMed Central · Cited by 539
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
High-resolution PLA-based composite scaffolds via 3-D printing technology
Serra, T., Planell, J. A., & Navarro, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.041 · Cited by 479
Gerstenfeld, L., Cho, T.-J., Kon, T., Aizawa, T., Tsay, A., Fitch, J., Barnes, G., Graves, D., & Einhorn, T. (2003) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.2003.18.9.1584 · Cited by 434
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
The Role of Brushite and Octacalcium Phosphate in Apatite Formation
Johnsson, M. S.-A., & Nancollas, G. H. (1992) · Critical Reviews in Oral Biology & Medicine · doi:10.1177/10454411920030010601 · Cited by 366
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., & Gelinsky, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.009 · Cited by 363
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
Habibovic, P., Gbureck, U., Doillon, C. J., Bassett, D. C., van Blitterswijk, C. A., & Barralet, J. E. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.10.023 · Cited by 347
Next generation calcium phosphate-based biomaterials
C. CHOW, L. (2009) · Dental Materials Journal · doi:10.4012/dmj.28.1 · Cited by 335
Chai, Y. C., Carlier, A., Bolander, J., Roberts, S. J., Geris, L., Schrooten, J., Van Oosterwyck, H., & Luyten, F. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.002 · Cited by 305
Yang, X., Ricciardi, B. F., Hernandez-Soria, A., Shi, Y., Pleshko Camacho, N., & Bostrom, M. P. G. (2007) · Bone · doi:10.1016/j.bone.2007.07.022 · Cited by 298
Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
Van der Stok, J., Van der Jagt, O. P., Amin Yavari, S., De Haas, M. F. P., Waarsing, J. H., Jahr, H., Van Lieshout, E. M. M., Patka, P., Verhaar, J. A. N., Zadpoor, A. A., et al. (2013) · Journal of Orthopaedic Research · doi:10.1002/jor.22293 · Cited by 271
Hydroxyapatite implants with designed internal architecture
Chu, T. G., Halloran, J. W., Hollister, S. J., & Feinberg, S. E. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011203226053 · Cited by 256
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Seyednejad, H., Gawlitta, D., Kuiper, R. V., de Bruin, A., van Nostrum, C. F., Vermonden, T., Dhert, W. J. A., & Hennink, W. E. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.002 · Cited by 245
Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
Kim, K., Yeatts, A., Dean, D., & Fisher, J. P. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0171 · Cited by 245
Angiogenesis in Calcium Phosphate Scaffolds by Inorganic Copper Ion Release
Barralet, J., Gbureck, U., Habibovic, P., Vorndran, E., Gerard, C., & Doillon, C. J. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0370 · Cited by 244
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Phage Nanofibers Induce Vascularized Osteogenesis in 3D Printed Bone Scaffolds
Wang, J., Yang, M., Zhu, Y., Wang, L., Tomsia, A. P., & Mao, C. (2014) · Advanced Materials · doi:10.1002/adma.201400154 · Cited by 239
Resorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder Printing
Gbureck, U., Hölzel, T., Klammert, U., Würzler, K., Müller, F. A., & Barralet, J. E. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700019 · Cited by 233
Poldervaart, M. T., Gremmels, H., van Deventer, K., Fledderus, J. O., Öner, F. C., Verhaar, M. C., Dhert, W. J. A., & Alblas, J. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.007 · Cited by 224
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Costa, P. F., Vaquette, C., Zhang, Q., Reis, R. L., Ivanovski, S., & Hutmacher, D. W. (2014) · Journal of Clinical Periodontology · doi:10.1111/jcpe.12214 · Cited by 221
Harnessing and Modulating Inflammation in Strategies for Bone Regeneration
Mountziaris, P. M., Spicer, P. P., Kasper, F. K., & Mikos, A. G. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0182 · Cited by 217
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
Fielding, G., & Bose, S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.07.009 · Cited by 211
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats
Poldervaart, M. T., Wang, H., van der Stok, J., Weinans, H., Leeuwenburgh, S. C. G., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · PLoS ONE · doi:10.1371/journal.pone.0072610 · Cited by 202
Martínez-Vázquez, F. J., Cabañas, M. V., Paris, J. L., Lozano, D., & Vallet-Regí, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.021 · Cited by 196
Warnke, P. H., Seitz, H., Warnke, F., Becker, S. T., Sivananthan, S., Sherry, E., Liu, Q., Wiltfang, J., & Douglas, T. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31577 · Cited by 192
Luo, Y., Wu, C., Lode, A., & Gelinsky, M. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015005 · Cited by 182
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Mechanical activation and cement formation of β-tricalcium phosphate
Gbureck, U. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00283-7 · Cited by 178
Duan, B., & Wang, M. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0127.focus · Cited by 166
Ishack, S., Mediero, A., Wilder, T., Ricci, J. L., & Cronstein, B. N. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33561 · Cited by 157
3D plotting of growth factor loaded calcium phosphate cement scaffolds
Akkineni, A. R., Luo, Y., Schumacher, M., Nies, B. A., Lode, A., & Gelinsky, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.036 · Cited by 156
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Kim, J., McBride, S., Tellis, B., Alvarez-Urena, P., Song, Y.-H., Dean, D. D., Sylvia, V. L., Elgendy, H., Ong, J., & Hollinger, J. O. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/025003 · Cited by 153
In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
Detsch, R., Schaefer, S., Deisinger, U., Ziegler, G., Seitz, H., & Leukers, B. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210373285 · Cited by 152
Zhang, Y., Xia, L., Zhai, D., Shi, M., Luo, Y., Feng, C., Fang, B., Yin, J., Chang, J., & Wu, C. (2015) · Nanoscale · doi:10.1039/c5nr05421d · Cited by 149
3D printed bioceramics for dual antibiotic delivery to treat implant-associated bone infection
Inzana, J. A., Trombetta, R. P., Schwarz, E., Kates, S. L., & Awad, H. A. (2015) · European Cells and Materials · doi:10.22203/ecm.v030a16 · Cited by 149
Self-citationShuai, C., Li, P., Liu, J., & Peng, S. (2013) · Materials Characterization · doi:10.1016/j.matchar.2012.12.009 · Cited by 137
Direct Printing of Bioceramic Implants with Spatially Localized Angiogenic Factors
Gbureck, U., Hölzel, T., Doillon, C. J., Müller, F. A., & Barralet, J. E. (2007) · Advanced Materials · doi:10.1002/adma.200601370 · Cited by 137
Lee, K., Wang, S., Yaszemski, M. J., & Lu, L. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.030 · Cited by 130
Lee, J. W., Ahn, G., Kim, D. S., & Cho, D. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.12.038 · Cited by 121
Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing
Klammert, U., Vorndran, E., Reuther, T., Müller, F. A., Zorn, K., & Gbureck, U. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4148-8 · Cited by 116
Rath, S. N., Strobel, L. A., Arkudas, A., Beier, J. P., Maier, A., Greil, P., Horch, R. E., & Kneser, U. (2012) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2012.01545.x · Cited by 115
Liao, H.-T., Lee, M., Tsai, W., Wang, H.-C., & Lu, W.-C. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1811 · Cited by 115
Tamimi, F., Torres, J., Al‐Abedalla, K., López‐Cabarcos, E., Alkhraisat, M. H., Bassett, D. C., Gbureck, U., & Barralet, J. E. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.050 · Cited by 113
Wang, S., Kempen, D. H. R., Simha, N. K., Lewis, J. L., Windebank, A. J., Yaszemski, M. J., & Lu, L. (2008) · Biomacromolecules · doi:10.1021/bm7012313 · Cited by 110
Shim, J.-H., Kim, S. E., Park, J. Y., Kundu, J., Kim, S. W., Kang, S. S., & Cho, D.-W. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0513 · Cited by 109
van der Stok, J., Wang, H., Yavari, S. A., Siebelt, M., Sandker, M., Waarsing, J. H., Verhaar, J. A. N., Jahr, H., ZADPOOR, A. A., Leeuwenburgh, S. C. G., et al. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0181 · Cited by 108
Wang, S., Yaszemski, M. J., Gruetzmacher, J. A., & Lu, L. (2008) · Polymer · doi:10.1016/j.polymer.2008.10.021 · Cited by 104
Brunner, T. J., Grass, R. N., Bohner, M., & Stark, W. J. (2007) · Journal of Materials Chemistry · doi:10.1039/b707171j · Cited by 103
Gbureck, U., Vorndran, E., & Barralet, J. E. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.02.027 · Cited by 97
Igawa, K., Mochizuki, M., 杉森, 理., Shimizu, K., Yamazawa, K., Kawaguchi, H., Nakamura, K., Takato, T., Nishimura, R., Suzuki, S., et al. (2006) · Journal of Artificial Organs · doi:10.1007/s10047-006-0347-y · Cited by 84
Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria
Torres, J., Tamimi, F., Alkhraisat, M. H., Prados‐Frutos, J. C., Rastikerdar, E., Gbureck, U., Barralet, J. E., & López‐Cabarcos, E. (2011) · Journal of Clinical Periodontology · doi:10.1111/j.1600-051x.2011.01787.x · Cited by 80
Castilho, M. D., Dias, M., Vorndran, E., Gbureck, U., Fernandes, P. R., Pires, I., Gouveia, B., Armés, H., Pires, E. B., & Rodrigues, J. M. C. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025005 · Cited by 78
Reactivity of α-tricalcium phosphate
Durucan, C., & Brown, P. W. (2002) · Journal of Materials Science · doi:10.1023/a:1014347814241 · Cited by 74
Strobel, L. A., Rath, S., Maier, A., Beier, J., Arkudas, A., Greil, P., Horch, R. E., & Kneser, U. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1511 · Cited by 72
Detsch, R., Uhl, F. E., Deisinger, U., & Ziegler, G. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3297-x · Cited by 71
Castilho, M. D., Rodrigues, J. M. C., Pires, I., Gouveia, B., Pereira, M. F. C., Moseke, C., Gröll, J., Ewald, A., & Vorndran, E. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015004 · Cited by 71
Seol, Y., Park, J. Y., Jung, J. W., Jang, J., Rijal, G., Kim, S. W., & Cho, D. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0726 · Cited by 70
Wang, S., Kempen, D. H. R., Yaszemski, M. J., & Lu, L. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.015 · Cited by 66
Comesaña, R., Lusquiños, F., del Val, J., Quintero, F., Riveiro, A., Boutinguiza, M., Jones, J. R., Hill, R. G., & Pou, J. (2015) · Scientific Reports · doi:10.1038/srep10677 · Cited by 63
3D Printing of Octacalcium Phosphate Bone Substitutes
Комлев, В. С., Popov, V. K., Mironov, A. V., Fedotov, A. Y., Teterina, A. Y., Смирнов, И. В., Bozo, I. Y., Александровна, Р. В., & Deev, R. V. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00081 · Cited by 57
Yang, S., Wang, J., Tang, L., Ao, H., Tan, H., Tang, T., & Liu, C. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.12.052 · Cited by 57
Gao, Y., Cao, W., Wang, X., Gong, Y., Tian, J., Zhao, N., & Zhang, X. (2006) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-9840-3 · Cited by 56
Rapid prototyping for tissue-engineered bone scaffold by 3D printing and biocompatibility study.
He, H., Zhang, J., Mi, X., Hu, Y., & Gu, X. (2015) · PubMed · Cited by 41
Liao, H.-T., Chen, Y.-Y., Lai, Y.-T., Hsieh, M., & Jiang, C. (2014) · BioMed Research International · doi:10.1155/2014/321549 · Cited by 34
Monolithic and assembled polymer–ceramic composites for bone regeneration
Nandakumar, A., Cruz, C. F., Mentink, A., Birgani, Z. N. T., Moroni, L., van Blitterswijk, C., & Habibović, P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.044 · Cited by 32
Bergemann, C., Cornelsen, M., Quade, A., Laube, T., Schnabelrauch, M., Rebl, H., Weißmann, V., Seitz, H., & Nebe, B. J. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.10.048 · Cited by 27
Geometrical versus Random β-TCP Scaffolds: Exploring the Effects on Schwann Cell Growth and Behavior
Sweet, L. M., Kang, Y., Czisch, C. E., Witek, L., Shi, Y., Smay, J., Plant, G. W., & Yang, Y. (2015) · PLoS ONE · doi:10.1371/journal.pone.0139820 · Cited by 22
Xia, Y., Zhou, P. Y., Cheng, X. S., Yu, X., Liang, C., Li, C., & Xu, S. G. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 22
El‐Ghannam, A., Hart, A., White, D. K., & Cunningham, L. L. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34585 · Cited by 16
Cited by
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
A Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Metadata
- Authors
- Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A.
- Venue
- Annals of Biomedical Engineering
- Published
- 2016-06-20
- Volume
- 45
- Issue
- 1
- Pages
- 23-44
- ISSN
- 0090-6964 (ISSN-L)
- 1573-9686
- OpenAlex
- W2467652405
- Cited by
- 377
- References
- 89
- FWCI
- 15.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.