The DOI matches its Crossref record; 184 of the 184 references it cites were found in a registry or an index.
A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications
Open accessAbstract
The application of various materials in biomedical procedures has recently experienced rapid growth. One area that is currently receiving significant attention from the scientific community is the treatment of a number of different types of bone-related diseases and disorders by using biodegradable polymer-ceramic composites. Biomaterials, the most common materials used to repair or replace damaged parts of the human body, can be categorized into three major groups: metals, ceramics, and polymers. Composites can be manufactured by combining two or more materials to achieve enhanced biocompatibility and biomechanical properties for specific applications. Biomaterials must display suitable properties for their applications, about strength, durability, and biological influence. Metals and their alloys such as titanium, stainless steel, and cobalt-based alloys have been widely investigated for implant-device applications because of their excellent mechanical properties. However, these materials may also manifest biological issues such as toxicity, poor tissue adhesion and stress shielding effect due to their high elastic modulus. To mitigate these issues, hydroxyapatite (HA) coatings have been used on metals because their chemical composition is similar to that of bone and teeth. Recently, a wide range of synthetic polymers such as poly (l-lactic acid) and poly (l-lactide-co-glycolide) have been studied for different biomedical applications, owing to their promising biocompatibility and biodegradability. This article gives an overview of synthetic polymer-ceramic composites with a particular emphasis on calcium phosphate group and their potential applications in tissue engineering. It is hoped that synthetic polymer-ceramic composites such as PLLA/HA and PCL/HA will provide advantages such as eliminating the stress shielding effect and the consequent need for revision surgery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bioceramics: From Concept to Clinic
Hench, L. L. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07132.x · Cited by 4,977
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Hench, L. L. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02540.x · Cited by 2,652
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206 · cited 1×
“PLGA is a biodegradable polymer that shows great potential to be used for these purposes owing to its safety, desirable mechanical properties, great cell adhesion, and controllable degradation rate [79].”
BackgroundState of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Suchanek, W., & Yoshimura, M. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0015 · Cited by 2,028
Biomedical applications of collagen
Lee, C. H., Singla, A., & Lee, Y. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00691-3 · Cited by 1,945
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Synthesis methods for nanosized hydroxyapatite with diverse structures
Sadat-Shojai, M., Khorasani, M.-T., Dinpanah-Khoshdargi, E., & Jamshidi, A. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.012 · Cited by 1,530
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Hutmacher, D. W. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,409
An overview of zirconia ceramics: Basic properties and clinical applications
Manicone, P. F., Rossi Iommetti, P., & Raffaelli, L. (2007) · Journal of Dentistry · doi:10.1016/j.jdent.2007.07.008 · Cited by 1,369
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Bioactive glass ceramics: properties and applications
Kokubo, T. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90194-f · Cited by 1,202
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Gelatin as a delivery vehicle for the controlled release of bioactive molecules
Young, S., Wong, M., Tabata, Y., & Mikos, A. G. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.09.023 · Cited by 1,097
Bose, S., & Tarafder, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.017 · Cited by 958
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Cao, W., & Hench, L. L. (1996) · Ceramics International · doi:10.1016/0272-8842(95)00126-3 · Cited by 836
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Correlation between substratum roughness and wettability, cell adhesion, and cell migration
Lampin, M., Warocquier-Cl�rout, R., Legris, C., Degrange, M., & Sigot-Luizard, M. F. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<99::aid-jbm12>3.0.co;2-e · Cited by 777
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
Kim, S.-S., Sun Park, M., Jeon, O., Yong Choi, C., & Kim, B.-S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.016 · Cited by 766
Electrophoretic deposition of biomaterials
Boccaccini, A. R., Keim, S., Ma, R., Li, Y., & Zhitomirsky, I. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0156.focus · Cited by 760
Self-citationA review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Biocompatibility of Advanced Manufactured Titanium Implants—A Review
Sidambe, A. (2014) · Materials · doi:10.3390/ma7128168 · Cited by 741
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis – A review
Surmenev, R. A., Surmeneva, M. A., & Ivanova, A. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.036 · Cited by 712
Yang, Y., Kim, K.-H., & Ong, J. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.029 · Cited by 667
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
PLGA-Based Nanoparticles as Cancer Drug Delivery Systems
Tabatabaei Mirakabad, F. S., Nejati-Koshki, K., Akbarzadeh, A., Yamchi, M. R., Milani, M., Zarghami, N., Zeighamian, V., Rahimzadeh, A., Alimohammadi, S., Hanifehpour, Y., et al. (2014) · Asian Pacific Journal of Cancer Prevention · doi:10.7314/apjcp.2014.15.2.517 · Cited by 542
Daculsi, G., Legeros, R. Z., Nery, E., Lynch, K., & Kerebel, B. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820230806 · Cited by 495
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Design and Development of Three-Dimensional Scaffolds for Tissue Engineering
Liu, C., Xia, Z., & Czernuszka, J. T. (2007) · Chemical Engineering Research and Design · doi:10.1205/cherd06196 · Cited by 483
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Absorbable implants for the fixation of fractures.
Böstman, O. M. (1991) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199173010-00022 · Cited by 459
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Mano, J. F., Sousa, R. A., Boesel, L. F., Neves, N. M., & Reis, R. L. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.001 · Cited by 450
Calcium Phosphate Materials in Restorative Dentistry: a Review
Legeros, R. Z. (1988) · Advances in Dental Research · doi:10.1177/08959374880020011101 · Cited by 440
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Hong, Z., Zhang, P., He, C., Qiu, X., Liu, A., Chen, L., Chen, X., & Jing, X. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.018 · Cited by 435
Electrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430 · cited 1×
“PLLA/HA & PLLA/collagen/HA Electrospinning 2009 [219]”
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
HOLZAPFEL, G. A. (2001) · Handbook of Materials Behavior Models · doi:10.1016/b978-012443341-0/50107-1 · Cited by 415
Nanomaterials in preventive dentistry
Hannig, M., & Hannig, C. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.83 · Cited by 414
The design of mineralised hard tissues for their mechanical functions
Currey, J. D. (1999) · Journal of Experimental Biology · doi:10.1242/jeb.202.23.3285 · Cited by 406
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
Bioactive Coatings for Orthopaedic Implants—Recent Trends in Development of Implant Coatings
Zhang, B., Myers, D., Wallace, G., Brandt, M., & Choong, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150711878 · Cited by 394
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
A New Calcium Phosphate, Water-setting Cement
Brown, L. C., Brown, W. E., & Chow, L. C. (1986) · Medical Entomology and Zoology · Cited by 348
Nano-fibrous poly(l-lactic acid) scaffolds with interconnected spherical macropores
Chen, V. J., & Ma, P. X. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.058 · Cited by 345
Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.082 · Cited by 335
A review of plasma-assisted methods for calcium phosphate-based coatings fabrication
Surmenev, R. A. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.11.002 · Cited by 332
Ginebra, M. P., Driessens, F. C. M., & Planell, J. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.049 · Cited by 322
Boccaccini, A. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00275-6 · Cited by 303
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Calcium orthophosphate-based biocomposites and hybrid biomaterials
Dorozhkin, S. V. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3124-x · Cited by 300
Resorbable materials of poly(l-lactide). VI. Plates and screws for internal fracture fixation
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90034-2 · Cited by 295
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Pillin, I., Montrelay, N., Bourmaud, A., & Grohens, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.005 · Cited by 289
Calcium Orthophosphates as Bioceramics: State of the Art
Dorozhkin, S. V. (2010) · Journal of Functional Biomaterials · doi:10.3390/jfb1010022 · Cited by 278
Zhang, P., Hong, Z., Yu, T., Chen, X., & Jing, X. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.041 · Cited by 268
On reducing anisotropy in 3D printed polymers via ionizing radiation
Shaffer, S., Yang, K., Vargas, J., Di Prima, M. A., & Voit, W. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.054 · Cited by 261
Crouzier, T., Ren, K., Nicolas, C., Roy, C., & Picart, C. (2009) · Small · doi:10.1002/smll.200800804 · Cited by 251
Thermal spraying of biomaterials
Heimann, R. B. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.04.052 · Cited by 248
Biomedical Applications of Poly(Lactic Acid)
P. Pawar, R., U. Tekale, S., U. Shisodia, S., T. Totre, J., & J. Domb, A. (2014) · Recent Patents on Regenerative Medicine · doi:10.2174/2210296504666140402235024 · Cited by 248
Kothapalli, C. R., Shaw, M. T., & Wei, M. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.06.005 · Cited by 247
Review: Polymeric-Based 3D Printing for Tissue Engineering
Wu, G.-H., & Hsu, S.-H. (2015) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-015-0038-3 · Cited by 239
Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation
Russias, J., Saiz, E., Nalla, R. K., Gryn, K., Ritchie, R. O., & Tomsia, A. P. (2006) · Materials Science and Engineering: C · doi:10.1016/j.msec.2005.08.004 · Cited by 235
Calcium phosphate/chitosan composite scaffolds for controlled in vitro antibiotic drug release
Zhang, Y., & Zhang, M. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10312 · Cited by 233
The repair of fractures of the orbital floor using biodegradable polylactic acid
Cutright, D. E., & Hunsuck, E. E. (1972) · Oral Surgery, Oral Medicine, Oral Pathology · doi:10.1016/0030-4220(72)90204-6 · Cited by 222
Bioabsorbable Implants: Review of Clinical Experience in Orthopedic Surgery
Ambrose, C. G., & Clanton, T. O. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000007802.59936.fc · Cited by 220
Blaker, J. J., Gough, J. E., Maquet, V., Notingher, I., & Boccaccini, A. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20055 · Cited by 215
Phase separation in poly(ethylene glycol)/poly(lactic acid) blends
Younes, H., & Cohn, D. (1988) · European Polymer Journal · doi:10.1016/0014-3057(88)90013-4 · Cited by 212
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Tsuji, H., & Miyauchi, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00191-9 · Cited by 204
Rai, B., Oest, M. E., Dupont, K. M., Ho, K. H., Teoh, S. H., & Guldberg, R. E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31142 · Cited by 196
The pro-angiogenic properties of multi-functional bioactive glass composite scaffolds
Gerhardt, L.-C., Widdows, K. L., Erol, M. M., Burch, C. W., Sanz-Herrera, J. A., Ochoa, I., Stämpfli, R., Roqan, I. S., Gabe, S., Ansari, T., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.02.032 · Cited by 195
Akindoyo, J. O., Beg, M. D. H., Ghazali, S., Heim, H. P., & Feldmann, M. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.09.013 · Cited by 194
Lao, L., Wang, Y., Zhu, Y., Zhang, Y., & Gao, C. (2011) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-011-4374-8 · Cited by 193
3D Printing and Additive Manufacturing Technologies
(2019) · Springer eBooks · doi:10.1007/978-981-13-0305-0 · Cited by 190
Recent Advances in 3D Printing of Aliphatic Polyesters
Chiulan, I., Frone, A., Brandabur, C., & Panaitescu, D. (2017) · Bioengineering · doi:10.3390/bioengineering5010002 · Cited by 189
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
3D-Printed Biopolymers for Tissue Engineering Application
Li, X., Cui, R., Sun, L., Aifantis, K. E., Fan, Y., Feng, Q., Cui, F., & Watari, F. (2014) · International Journal of Polymer Science · doi:10.1155/2014/829145 · Cited by 185
Abdal-hay, A., Sheikh, F. A., & Lim, J. K. (2013) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2012.09.017 · Cited by 184
Singh, L., Kumar, V., & Ratner, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.040 · Cited by 179
Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10587 · Cited by 177
Growth of Silver Nanoparticles by DC Magnetron Sputtering
Asanithi, P., Chaiyakun, S., & Limsuwan, P. (2012) · Journal of Nanomaterials · doi:10.1155/2012/963609 · Cited by 176
Nanostructured Ceramics for Biomedical Implants
Catledge, S. A., Fries, M. D., Vohra, Y. K., Lacefield, W. R., Lemons, J. E., Woodard, S., & Venugopalanc, R. (2002) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2002.116 · Cited by 167
Wei, J., Chen, F., Shin, J., Hong, H., Dai, C., Su, J., & Liu, C. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.046 · Cited by 156
A poly(lactide‐co‐glycolide)/hydroxyapatite composite scaffold with enhanced osteoconductivity
Kim, S. S., Ahn, K., Park, M. S., Lee, J., Choi, C. Y., & Kim, B. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30836 · Cited by 156
Impact modified PLA-hydroxyapatite composites – Thermo-mechanical properties
Akindoyo, J. O., Beg, M. D. H., Ghazali, S. B., Heim, H., & Feldmann, M. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.01.017 · Cited by 155
Boccaccini, A. R., Blaker, J. J., Maquet, V., Day, R. M., & Jérôme, R. (2004) · Materials Science and Engineering C · doi:10.1016/j.msec.2004.03.002 · Cited by 154
Torres, F. G., Nazhat, S. N., Fadzullah, S. H. S. M., Maquet, V., & Boccaccini, A. R. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.05.018 · Cited by 135
Ceramic Drug Delivery: A Perspective
Paul, W., & Sharma, C. P. (2003) · Journal of Biomaterials Applications · doi:10.1177/0885328203017004001 · Cited by 134
Lin, H., Kuo, C., Yang, C.-W., Shaw, S., & Wu, Y. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10183 · Cited by 134
Zhang, B., Seong, B., Nguyen, V., & Byun, D. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/2/025015 · Cited by 134
Clinical applications of calcium phosphate biomaterials: A review
de Groot, K. (1993) · Ceramics International · doi:10.1016/0272-8842(93)90050-2 · Cited by 125
Jakus, A. E., & Shah, R. N. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35684 · Cited by 122
In vitro–in vivo characterization of gentamicin bone implants
Baro, M., Sánchez, E., Delgado, A., Perera, A., & Évora, C. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00179-7 · Cited by 120
Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Fisher, J. P., & Mikos, A. G. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1286184 · Cited by 120
Akeson, W. H., Woo, S. L., Rutherford, L., Coutts, R. D., Gonsalves, M., & Amiel, D. (1976) · Acta Orthopaedica Scandinavica · doi:10.3109/17453677608991984 · Cited by 118
Biodegradable polylactide plates and screws in orthognathic surgery: technical note
Haers, P. E. J. J., Suuronen, R., Lindqvist, C., & Sailer, H. F. (1998) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/s1010-5182(98)80045-0 · Cited by 118
Tamjid, E., Bagheri, R., Vossoughi, M., & Simchi, A. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.06.013 · Cited by 117
Nanofibrous Poly(lactic acid)/Hydroxyapatite Composite Scaffolds for Guided Tissue Regeneration
Jeong, S. I., Ko, E. K., Yum, J., Jung, C. H., Lee, Y. M., & Shin, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700107 · Cited by 116
Highly porous polycaprolactone-45S5 Bioglass® scaffolds for bone tissue engineering
Fabbri, P., Cannillo, V., Sola, A., Dorigato, A., & Chiellini, E. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.05.029 · Cited by 110
Poh, P. S. P., Hutmacher, D. W., Stevens, M. M., & Woodruff, M. A. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045005 · Cited by 110
Migliaresi, C., Lollis, A. D., Fambri, L., & Cohn, D. (1991) · Clinical Materials · doi:10.1016/0267-6605(91)90018-b · Cited by 108
Анатольевич, С. Р., Surmeneva, M. A., Evdokimov, K. E., Pichugin, V. F., Peitsch, T., & Epple, M. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.12.039 · Cited by 104
Preparation of bioactive porous HA/PCL composite scaffolds
Zhao, J., Guo, L., Yang, X., & Weng, J. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.08.056 · Cited by 102
Ren, J., Blackwood, K. A., Doustgani, A., Poh, P. S. P., Steck, R., Stevens, M. M., & Woodruff, M. A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34985 · Cited by 101
Evolving strategies for preventing biofilm on implantable materials
Shah, S. R., Tatara, A. M., D'Souza, R. N., Mikos, A. G., & Kasper, F. K. (2013) · Materials Today · doi:10.1016/j.mattod.2013.05.003 · Cited by 99
Ang, K. C., Leong, K. F., Chua, C. K., & Chandrasekaran, M. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30996 · Cited by 97 · cited 1×
“The incorporation of HA particles into a polymer matrix can improve the degradation rate of the composites, which is attributed to the percentage of HA particles and enhancement of their bioactivity of them [30,31]; and 3.”
BackgroundPersson, M., Lorite, G. S., Kokkonen, H. E., Cho, S.-W., Lehenkari, P. P., Skrifvars, M., & Tuukkanen, J. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.06.029 · Cited by 96
Jing, X., Mi, H., & Turng, L. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.049 · Cited by 96
Wang, Z., Wang, Y., Ito, Y., Zhang, P., & Chen, X. (2016) · Scientific Reports · doi:10.1038/srep20770 · Cited by 93
Preparation and characterization of dense nanohydroxyapatite/PLLA composites
Gay, S., Arostegui, S., & Lemaître, J. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.06.005 · Cited by 92
Preparation of single poly(lactic acid) composites
Li, R., & Yao, D. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27406 · Cited by 92
Lou, T., Wang, X. J., Song, G., Gu, Z., & Yang, Z. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.06.004 · Cited by 91
3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
Corcione, C. E., Gervaso, F., Scalera, F., Montagna, F., Maiullaro, T., Sannino, A., & Maffezzoli, A. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2016-0194 · Cited by 90
Pamuła, E., Pawlik, J., Cholewa‐Kowalska, K., Łączka, M., Kantor, L. A., Niedźwiedzki, Ł., Reilly, G. C., Filipowska, J., Madej, W., Kolodziejczyk, M., et al. (2011) · Annals of Biomedical Engineering · doi:10.1007/s10439-011-0307-4 · Cited by 88
Lin, P.-L., Fang, H.-W., Tseng, T., & Lee, W.-H. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.10.064 · Cited by 87
Manufacturing and Properties of PLA Absorbable Surgical Suture
Lou, C., Yao, C., Chen, Y.-S., Hsieh, T.-C., Lin, J., & Hsing, W.-H. (2008) · Textile Research Journal · doi:10.1177/0040517507087856 · Cited by 87
Evaluation of hydroxylapatite/poly(l-lactide) composites: physico-chemical properties
Verheyen, C. C. P. M., Klein, C. P. A. T., Hogervorst, J. M. A., Wolke, J. G. C., van Blitterswijk, C., & de Groot, K. (1993) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00122979 · Cited by 86
Non-Thermal Plasma Technology for Polymeric Materials
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-03254-0 · Cited by 85
Electrospun PCL/PLA/HA Based Nanofibers as Scaffold for Osteoblast-Like Cells
Fang, R., Zhang, E., Xu, L., & Wei, S. (2010) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2010.2831 · Cited by 84
Damadzadeh, B., Jabari, H., Skrifvars, M., Airola, K., Moritz, N., & VALLITTU, P. K. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4110-9 · Cited by 82
Vargas, G. E., Durand, L. A. H., Cadena, V., Romero, M., Mesones, R. V., Mačković, M., Spallek, S., Spiecker, E., Boccaccini, A. R., & Gorustovich, A. A. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4892-7 · Cited by 80
López, E. O., Mello, A., Sendão, H., Costa, L. T., ROSSI, A. L., Ospina, R., Borghi, F. F., Filho, J. G. D. S., & Rossi, A. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4020007 · Cited by 77
Kutikov, A. B., & Song, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.013 · Cited by 70
Shuai, C., Yang, B. L., Peng, S., & Li, Z. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5001-2 · Cited by 70
DROP-ON-DEMAND INKJET BIOPRINTING: A PRIMER
Binder, K. W., ALLEN, A. J., Yoo, J. J., & Atala, A. (2011) · Gene Therapy and Regulation · doi:10.1142/s1568558611000258 · Cited by 69
Dziadek, M., Pawlik, J., Menaszek, E., Stodolak‐Zych, E., & Cholewa‐Kowalska, K. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33350 · Cited by 66
Effect of n-HA with different surface-modified on the properties of n-HA/PLGA composite
Liuyun, J., Chengdong, X., Dongliang, C., Lixin, J., & xiubing, P. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.06.091 · Cited by 66
Slavcheva, E. P., Ganske, G., Topalov, G., Mokwa, W., & Schnakenberg, U. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.02.033 · Cited by 64
Mou, Z., Zhao, L.-J., Zhang, Q.-A., Zhang, J., & Zhang, Z. (2011) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2011.07.003 · Cited by 63
Dziadek, M., Menaszek, E., Zagrajczuk, B., Pawlik, J., & Cholewa‐Kowalska, K. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.06.020 · Cited by 60
Niemelä, T. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.02.003 · Cited by 59
Treatment of Large Complex Cranial Bone Defects by Using Hydroxyapatite Ceramic Implants
Ono, I., Tateshita, T., Satou, M., Sasaki, T., Matsumoto, M., & Kodama, N. (1999) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199908000-00003 · Cited by 59
Filipowska, J., Pawlik, J., Cholewa‐Kowalska, K., Tylko, G., Pamuła, E., Niedźwiedzki, Ł., Szuta, M., Łączka, M., & Osyczka, A. M. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/6/065001 · Cited by 58
3D-printed scaffolds based on PLA/HA nanocomposites for trabecular bone reconstruction
Niaza, K. V., Senatov, F. S., Kaloshkin, S. D., Maksimkin, A. V., & Chukov, D. I. (2016) · Journal of Physics Conference Series · doi:10.1088/1742-6596/741/1/012068 · Cited by 58
Multifunctional PLLA-ceramic fiber membranes for bone regeneration applications
Santos, D., Silva, D. M., Gomes, P. S., Fernandes, M. H., Santos, J. D., & Sencadas, V. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.05.032 · Cited by 57
Lei, B., Shin, K.-H., Noh, D.-Y., Jo, I.-H., Koh, Y., Kim, H., & Kim, S. E. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.11.039 · Cited by 55
Rakovsky, A., Gotman, I., Rabkin, E., & Gutmanas, E. Y. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.12.022 · Cited by 55
A Multiphase System Bone Implant for Regenerating the Calvaria
Kleinschmidt, J. C., Marden, L. J., Kent, D., Quigley, N. C., & Hollinger, J. O. (1993) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199304000-00002 · Cited by 53
Mechanical properties and in vitro degradation of PLGA suture manufactured via electrospinning
Haghighat, F., & Ravandi, S. A. H. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-0071-9 · Cited by 52
Relationship between microstructure and fracture behavior of bioabsorbable HA/PLLA composites
Todo, M., Park, S. D., Arakawa, K., & TAKENOSHITA, Y. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.10.001 · Cited by 52
Kady, A. M. E., Saad, E. A., El‐Hady, B. M. A., & Farag, M. M. (2009) · Ceramics International · doi:10.1016/j.ceramint.2009.11.012 · Cited by 49
Preparation and characterization of PLLA/nHA nonwoven mats via laser melt electrospinning
Li, X., Liu, H., Wang, J., & Li, C. (2012) · Materials Letters · doi:10.1016/j.matlet.2011.12.108 · Cited by 47
Fabrication of PLLA/HA composite scaffolds modified by DNA
Nishida, Y., Domura, R., Sakai, R., Okamoto, M., Arakawa, S., Ishiki, R., Salick, M. R., & Turng, L. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.063 · Cited by 37
A facile method to fabricate poly(l-lactide) nano-fibrous morphologies by phase inversion
Papenburg, B. J., Bolhuis‐Versteeg, L. A. M., Grijpma, D. W., Feijén, J., Weßling, M., & Stamatialis, D. F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.051 · Cited by 36
The effect of the type of HA on the degradation of PLGA/HA composites
Naik, A., Shepherd, D. V., Shepherd, J. H., Best, S. M., & Cameron, R. E. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.048 · Cited by 35
Plasma Modified Polymeric Materials for Scaffolding of Bone Tissue Engineering
Joshy, K. S., Snigdha, S., & Thomas, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813152-7.00016-0 · Cited by 34
Zhang, Y., Dong, K., Wang, F., Wang, H., Wang, J., Jiang, Z., & Diao, S. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.06.053 · Cited by 30
Liuyun, J., Chengdong, X., Lixin, J., & Xu, L. (2013) · Materials Research Bulletin · doi:10.1016/j.materresbull.2013.06.074 · Cited by 27
Shin, Y. M., Park, J., Jeong, S. I., An, S., Gwon, H., Lim, Y., Nho, Y., & Kim, C.-Y. (2014) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-013-0781-7 · Cited by 24
Solidification behavior of PLLA/nHA nanocomposites
Delabarde, C., Plummer, C. J. G., Bourban, P. ‐., & Månson, J. ‐. E. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.04.024 · Cited by 21
Tanır, T. E., Hasırcı, V., & Hasırcı, N. (2014) · Polymer Composites · doi:10.1002/pc.23100 · Cited by 21
Lim, J. Y., Kim, S. H., Lim, S., & Kim, Y. H. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200290033 · Cited by 20
Liuyun, J., Chengdong, X., Lixin, J., & Xu, L. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.05.004 · Cited by 20
Mina, A., Castano, A. O., Caicedo, J. C., Caicedo, H. H., & Aguilar, Y. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.04.041 · Cited by 18
PLLA‐HA vs. PLGA‐HA characterization and comparative analysis
Albano, C., González, G., Palacios, J. K., Karam, A. R., & Covis, M. (2013) · Polymer Composites · doi:10.1002/pc.22445 · Cited by 17
Crecelius, C. (2013) · Atlas of the Oral and Maxillofacial Surgery Clinics · doi:10.1016/j.cxom.2012.12.011 · Cited by 14
A Review on Current State of Art of Bioprinting
Vyas, D., & Udyawar, D. (2018) · Springer eBooks · doi:10.1007/978-981-13-0305-0_17 · Cited by 11
Magnetron sputtered iridium oxide as anode catalyst for PEM hydrogen generation
Slavcheva, E. P. (2011) · Macedonian Journal of Chemistry and Chemical Engineering · doi:10.20450/mjcce.2011.69 · Cited by 9
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
(2002) · doi:10.1002/1521-3773(20020902)41:17<3130::aid-anie3130>3.0.co;2-1
Cited by
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Metadata
- Authors
- Alizadeh-Osgouei, M., Li, Y., & Wen, C.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 4
- Issue
- 1
- Pages
- 22-36
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W2903146197
- Cited by
- 356
- References
- 184
- FWCI
- 9.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.