The DOI matches its Crossref record; 154 of the 154 references it cites were found in a registry or an index.
Functionally graded materials for orthopedic applications – an update on design and manufacturing
Open accessAbstract
Functionally graded materials (FGMs) are innovative materials whose composition and/or microstructure gradually vary in space according to a designed law. As a result, also the properties gradually vary in space, so as to meet specific non-homogeneous service requirements without any abrupt interface at the macroscale. FGMs are emerging materials for orthopedic prostheses, since the functional gradient can be adapted to reproduce the local properties of the original bone, which helps to minimize the stress shielding effect and, at the same time, to reduce the shear stress between the implant and the surrounding bone tissue, two critical prerequisites for a longer lifespan of the graft. After a brief introduction to the origin of the FGM concept, the review surveys some representative examples of graded systems which are present in nature and, in particular, in the human body, with a focus on bone tissue. Then the rationale for using FGMs in orthopedic devices is discussed more in detail, taking into account both biological and biomechanical requirements. The core of the paper is dedicated to two fundamental topics, which are essential to benefit from the use of FGMs for orthopedic applications, namely (1) the computational tools for materials design and geometry optimization, and (2) the manufacturing techniques currently available to produce FGM-based grafts. This second part, in its turn, is structured to consider the production of functionally graded coatings (FGCs), of functionally graded 3D parts, and of special devices with a gradient in porosity (functionally graded scaffolds). The inspection of the literature on the argument clearly shows that the integration of design and manufacturing remains a critical step to overpass in order to achieve effective FGM-based implants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Hench, L. L. (2006) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0432-z · Cited by 2,505
A review on fundamentals and applications of electrophoretic deposition (EPD)
BESRA, L., & LIU, M. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.07.001 · Cited by 2,258
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Suchanek, W., & Yoshimura, M. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0015 · Cited by 2,028
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
KURTZ, S., MOWAT, F., ONG, K., CHAN, N., LAU, E., & HALPERN, M. (2005) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200507000-00010 · Cited by 1,347
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Biomedical Applications of Layer‐by‐Layer Assembly: From Biomimetics to Tissue Engineering
Tang, Z., Wang, Y., Podsiadlo, P., & Kotov, N. A. (2006) · Advanced Materials · doi:10.1002/adma.200600113 · Cited by 1,302
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Gerhardt, L.-C., & Boccaccini, A. R. (2010) · Materials · doi:10.3390/ma3073867 · Cited by 1,179
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Graded Materials for Resistance to Contact Deformation and Damage
Suresh, S. (2001) · Science · doi:10.1126/science.1059716 · Cited by 852
ELECTROPHORETIC DEPOSITION OF MATERIALS
Van der Biest, O. O., & Vandeperre, L. J. (1999) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.29.1.327 · Cited by 782
The future of biologic coatings for orthopaedic implants
Goodman, S. B., Yao, Z., Keeney, M., & Yang, F. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.01.074 · Cited by 779
Fauchais, P. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/9/r02 · Cited by 777
Electrophoretic deposition of biomaterials
Boccaccini, A. R., Keim, S., Ma, R., Li, Y., & Zhitomirsky, I. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0156.focus · Cited by 760
The aging of Wolff’s “law”: Ontogeny and responses to mechanical loading in cortical bone
Pearson, O. M., & Lieberman, D. E. (2004) · American Journal of Physical Anthropology · doi:10.1002/ajpa.20155 · Cited by 745
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Oh, S. H., Park, I. K., Kim, J. M., & Lee, J. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.024 · Cited by 713
Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis – A review
Surmenev, R. A., Surmeneva, M. A., & Ivanova, A. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.036 · Cited by 712
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Synergetic Strengthening by Gradient Structure
Wu, X. L., Jiang, P., Chen, L., Zhang, J. F., Yuan, F. P., & Zhu, Y. T. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.935821 · Cited by 614
Raabe, D., Sachs, C., & Romano, P. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.027 · Cited by 607
Human intervertebral disc: Structure and function
Humzah, M. D., & Soames, R. W. (1988) · The Anatomical Record · doi:10.1002/ar.1092200402 · Cited by 584
Functionally graded materials for biomedical applications
Pompe, W., Worch, H., Epple, M., Friess, W., Gelinsky, M., Greil, P., Hempel, U., Scharnweber, D., & Schulte, K. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00580-x · Cited by 575
A critical review on polymer-based bio-engineered materials for scaffold development
Cheung, H.-Y., Lau, K.-T., Lu, T.-P., & Hui, D. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.014 · Cited by 531
Tissue Engineering of Bone: Material and Matrix Considerations
Khan, Y., Yaszemski, M. J., Mikos, A. G., & Laurencin, C. T. (2008) · Journal of Bone and Joint Surgery · doi:10.2106/jbjs.g.01260 · Cited by 481
Cartilage engineering: a crucial combination of cells, biomaterials and biofactors
Vinatier, C., Mrugala, D., Jorgensen, C., Guicheux, J., & Noël, D. (2009) · Trends in Biotechnology · doi:10.1016/j.tibtech.2009.02.005 · Cited by 481
Balani, K., Anderson, R., Laha, T., Andara, M., Tercero, J., Crumpler, E., & Agarwal, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.013 · Cited by 479
Porous hydroxyapatite for artificial bone applications
Sopyan, I., Mel, M., Ramesh, S. S. R., & Khalid, K. A. (2007) · Science and Technology of Advanced Materials · doi:10.1016/j.stam.2006.11.017 · Cited by 473
Biomimetic Scaffolds for Tissue Engineering
Kim, T. G., Shin, H., & Lim, D. W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201103083 · Cited by 459
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Gradient biomaterials for soft-to-hard interface tissue engineering
Seidi, A., Ramalingam, M., Elloumi-Hannachi, I., Ostrovidov, S., & Khademhosseini, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.011 · Cited by 398
Parthasarathy, J., Starly, B., & Raman, S. (2011) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2011.01.004 · Cited by 392
Scaffolds for Tissue Engineering and 3D Cell Culture
Carletti, E., Motta, A., & Migliaresi, C. (2011) · Methods in Molecular Biology · doi:10.1007/978-1-60761-984-0_2 · Cited by 387
Suspension and solution thermal spray coatings
Pawłowski, L. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.03.005 · Cited by 385
Osteochondral tissue engineering: Current strategies and challenges
Nukavarapu, S. P., & Dorcemus, D. L. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.11.004 · Cited by 383
Thermal Spray: Current Status and Future Trends
Herman, H., Sampath, S., & McCune, R. (2000) · MRS Bulletin · doi:10.1557/mrs2000.119 · Cited by 383
Ashammakhi, N. A., & Ferretti, P. (2004) · UCL Discovery (University College London) · Cited by 383
Li, X., Xie, J., Lipner, J., Yuan, X., Thomopoulos, S., & Younan Xia, A. (2009) · Nano Letters · doi:10.1021/nl901582f · Cited by 371
Kazemzadeh-Narbat, M., Lai, B. F. L., Ding, C., Kizhakkedathu, J. N., Hancock, R. E. W., & Wang, R. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.04.036 · Cited by 361
Erisken, C., Kalyon, D. M., & Wang, H. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.022 · Cited by 359
Bioactive composite materials for tissue engineering scaffolds
Boccaccini, A. R., & Blaker, J. J. (2005) · Expert Review of Medical Devices · doi:10.1586/17434440.2.3.303 · Cited by 347
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
Functional Grading of Mineral and Collagen in the Attachment of Tendon to Bone
Genin, G. M., Kent, A., Birman, V., Wopenka, B., Pasteris, J. D., Marquez, P. J., & Thomopoulos, S. (2009) · Biophysical Journal · doi:10.1016/j.bpj.2009.05.043 · Cited by 331
Current Progress in Bioactive Ceramic Scaffolds for Bone Repair and Regeneration
Gao, C., Deng, Y., Feng, P., Mao, Z., Li, P., Yang, B., Deng, J., Cao, Y., Shuai, C., & Peng, S. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15034714 · Cited by 310
Osteochondral tissue engineering: scaffolds, stem cells and applications
Nooeaid, P., Salih, V., Beier, J. P., & Boccaccini, A. R. (2012) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2012.01571.x · Cited by 300
Effects of surface coating on reducing friction and wear of orthopaedic implants
Ching, H. A., Choudhury, D., Nine, M. J., & Abu Osman, N. A. (2014) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/15/1/014402 · Cited by 292
A biomimetic multi-layered collagen-based scaffold for osteochondral repair
Levingstone, T. J., Matsiko, A., Dickson, G. R., O’Brien, F. J., & Gleeson, J. P. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.01.005 · Cited by 290
Concept and P/M fabrication of functionally gradient materials
Kawasaki, A., & Watanabe, R. (1997) · Ceramics International · doi:10.1016/0272-8842(95)00143-3 · Cited by 284
Bioactive glass coatings for orthopedic metallic implants
Lopez-Esteban, S., Saiz, E., Fujino, S., Oku, T., Suganuma, K., & Tomsia, A. P. (2003) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(03)00303-0 · Cited by 278
Graded/Gradient Porous Biomaterials
Miao, X., & Sun, D. (2009) · Materials · doi:10.3390/ma3010026 · Cited by 265
Surface Engineering for Bone Implants: A Trend from Passive to Active Surfaces
Bosco, R., Van Den Beucken, J., Leeuwenburgh, S., & Jansen, J. (2012) · Coatings · doi:10.3390/coatings2030095 · Cited by 265
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10582 · Cited by 262
Design of graded biomimetic osteochondral composite scaffolds
Tampieri, A., Sandri, M., Landi, E., Pressato, D., Francioli, S., Quarto, R., & Martin, I. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.008 · Cited by 256
Thermal spraying of biomaterials
Heimann, R. B. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.04.052 · Cited by 248
Energy absorbent natural materials and bioinspired design strategies: A review
McKittrick, J., Chen, P.-Y., Tombolato, L., Novitskaya, E. E., Trim, M. W., Hirata, G. A., Olevsky, E. A., Horstemeyer, M. F., & Meyers, M. A. (2010) · Materials Science and Engineering: C · doi:10.1016/j.msec.2010.01.011 · Cited by 240
Mollusc shell microstructures and crystallographic textures
Chateigner, D., Hedegaard, C., & Wenk, H.-R. (2000) · Journal of Structural Geology · doi:10.1016/s0191-8141(00)00088-2 · Cited by 237
Macchetta, A., Turner, I. G., & Bowen, C. R. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.009 · Cited by 225
Electrophoretic deposition of composite hydroxyapatite-chitosan coatings
Pang, X., & Zhitomirsky, I. (2007) · Materials Characterization · doi:10.1016/j.matchar.2006.05.011 · Cited by 225
Biomaterials and scaffold design: key to tissue‐engineering cartilage
Raghunath, J., Rollo, J., Sales, K. M., Butler, P. E., & Seifalian, A. M. (2007) · Biotechnology and Applied Biochemistry · doi:10.1042/ba20060134 · Cited by 222
Sugiyama, T., Meakin, L. B., Browne, W. J., Galea, G. L., Price, J. S., & Lanyon, L. E. (2012) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1599 · Cited by 209
Biomimetics Learning from Nature
(2010) · InTech eBooks · doi:10.5772/198 · Cited by 197
Arabnejad Khanoki, S., & Pasini, D. (2012) · Journal of Biomechanical Engineering · doi:10.1115/1.4006115 · Cited by 192
Balla, V. K., DeVasConCellos, P. D., Xue, W., Bose, S., & Bandyopadhyay, A. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.01.011 · Cited by 170
Tunable staged release of therapeutics from layer-by-layer coatings with clay interlayer barrier
Min, J., Braatz, R. D., & Hammond, P. T. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.12.009 · Cited by 161
Bioactive glass coatings: A review
Sola, A., Bellucci, D., Cannillo, V., & Cattini, A. (2011) · Surface Engineering · doi:10.1179/1743294410y.0000000008 · Cited by 156
Self-citationAdditive manufacturing of metallic cellular materials via three-dimensional printing
Williams, C. B., Cochran, J. K., & Rosen, D. W. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2812-2 · Cited by 152
Werner, J., Linner‐Krc̆mar, B., Frieß, W., & Greil, P. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00191-6 · Cited by 150
Fabricating tubular scaffolds with a radial pore size gradient by a spinning technique
Harley, B. A. C., Hastings, A. Z., Yannas, I. V., & Sannino, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.012 · Cited by 146
Biological Evaluation of Bioceramic Materials- A Review
Thamaraiselvi, T., & Rajeswari, S. (2014) · Cited by 145
Strategies for osteochondral repair: Focus on scaffolds
Seo, S.-J., Mahapatra, C., Singh, R. K., Knowles, J. C., & Kim, H. (2014) · Journal of Tissue Engineering · doi:10.1177/2041731414541850 · Cited by 145
Mollusc shell structures: novel design strategies for synthetic materials
Kaplan, D. L. (1998) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(98)80096-x · Cited by 139
The structural basis of interlamellar cohesion in the intervertebral disc wall
Pezowicz, C. A., Robertson, P. A., & Broom, N. D. (2006) · Journal of Anatomy · doi:10.1111/j.1469-7580.2006.00536.x · Cited by 133
What’s next? Alternative materials for articulation in total joint replacement
Sonntag, R., Reinders, J., & Kretzer, J. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.029 · Cited by 130
Bioinspired Scaffolds for Osteochondral Regeneration
Lopa, S., & Madry, H. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0356 · Cited by 127
Hazlehurst, K. B., Wang, C., & Stanford, M. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.009 · Cited by 127
Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
Yan, Y., Xiong, Z., Hu, Y., Wang, S., Zhang, R., & Zhang, C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)01339-3 · Cited by 126
Osteophilic Multilayer Coatings for Accelerated Bone Tissue Growth
Shah, N. J., Hong, J., Hyder, M. N., & Hammond, P. T. (2012) · Advanced Materials · doi:10.1002/adma.201104475 · Cited by 125
Jor, J. W. Y., Parker, M. D., Taberner, A. J., Nash, M. P., & Nielsen, P. M. F. (2013) · WIREs Systems Biology and Medicine · doi:10.1002/wsbm.1228 · Cited by 124
Micro-indentation and inverse analysis to characterize elastic–plastic graded materials
Gu, Y. X., Nakamura, T., Prchlík, L., Sampath, S., & Wallace, J. S. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00462-8 · Cited by 116
Costa, R. R., Custódio, C. A., Arias, F. J., Rodríguez‐Cabello, J. C., & Mano, J. F. (2011) · Small · doi:10.1002/smll.201100875 · Cited by 116
Evaluation of macrostructural bone biomechanics
Beaupied, H., Lespessailles, É., & Benhamou, C.-L. (2007) · Joint Bone Spine · doi:10.1016/j.jbspin.2007.01.019 · Cited by 113
Electrophoretic deposition of composite hydroxyapatite–chitosan–heparin coatings
Sun, F., Pang, X., & Zhitomirsky, I. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.04.007 · Cited by 110
Biomaterials for Tissue Engineering Applications: A Review of the Past and Future Trends
Burdick, J. A., & Mauck, R. L. (2010) · Springer eBooks · doi:10.1007/978-3-7091-0385-2 · Cited by 110
Polymer Gradient Materials: Can Nature Teach Us New Tricks?
Claußen, K. U., Scheibel, T., Schmidt, H., & Giesa, R. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200032 · Cited by 107
Fabrication of Three-Dimensional Tissues
Tsang, V. L., & Bhatia, S. N. (2006) · Springer eBooks · doi:10.1007/10_010 · Cited by 107
Electrophoretic deposition of composite hydroxyapatite–silica–chitosan coatings
Grandfield, K., & Zhitomirsky, I. (2006) · Materials Characterization · doi:10.1016/j.matchar.2006.10.016 · Cited by 105
Xu, J., Khor, K. A., Sui, J., & Chen, W. N. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.05.009 · Cited by 103
Perspectives in Multiphasic Osteochondral Tissue Engineering
Jeon, J. E., Vaquette, C., Klein, T. J., & Hutmacher, D. W. (2013) · The Anatomical Record · doi:10.1002/ar.22795 · Cited by 101
Multiscale structural gradients enhance the biomechanical functionality of the spider fang
Bar‐On, B., Barth, F. G., Fratzl, P., & Politi, Y. (2014) · Nature Communications · doi:10.1038/ncomms4894 · Cited by 98
Bi-material attachment through a compliant interfacial system at the tendon-to-bone insertion site
Liu, Y. X., Thomopoulos, S., Birman, V., Li, J.-S., & Genin, G. M. (2011) · Mechanics of Materials · doi:10.1016/j.mechmat.2011.08.005 · Cited by 98
Recent Progress in Interfacial Tissue Engineering Approaches for Osteochondral Defects
Castro, N. J., Hacking, S. A., & Zhang, L. G. (2012) · Annals of Biomedical Engineering · doi:10.1007/s10439-012-0605-5 · Cited by 95
Preparation of graded porous titanium coatings on titanium implant materials by plasma spraying
Yang, Y., Tian, J., Tian, J., Chen, Z., Deng, X., & Zhang, D. H. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200011)52:2<333::aid-jbm12>3.0.co;2-t · Cited by 94
Zou, B., Liu, Y., Luo, X., Chen, F., Guo, X., & Li, X. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.003 · Cited by 91
Dormer, N. H., Berkland, C. J., & Detamore, M. S. (2010) · Annals of Biomedical Engineering · doi:10.1007/s10439-010-0033-3 · Cited by 90
Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem
Arabnejad, S., & Pasini, D. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.03.002 · Cited by 90
Fundamentals of Medical Implant Materials
Nag, S., & Banerjee, R. (2012) · ASM International eBooks · doi:10.31399/asm.hb.v23.a0005682 · Cited by 90
Aseptic loosening of femoral components – A review of current and future trends in materials used
Bahraminasab, M., Sahari, B. B., Edwards, K. L., Farahmand, F., Arumugam, M., & Hong, T. S. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.05.046 · Cited by 89
Ding, X., Zhu, M., Xu, B., Zhang, J., Zhao, Y., Ji, S., Wang, L., Wang, L., Li, X., Kong, D., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5036708 · Cited by 87
Simple methods to fabricate Bioglass®-derived glass–ceramic scaffolds exhibiting porosity gradient
Bretcanu, O., Samaille, C., & Boccaccini, A. R. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2536-y · Cited by 86
Strong, macroporous, and in situ-setting calcium phosphate cement-layered structures
Xu, H. H. K., Burguera, E. F., & Carey, L. E. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.015 · Cited by 82
Balamurugan, A., Balossier, G., Michel, J., & Ferreira, J. M. F. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.08.055 · Cited by 81
Bioactive calcium phosphate invert glass-ceramic coating on β-type Ti–29Nb–13Ta–4.6Zr alloy
Kasuga, T., Nogami, M., Niinomi, M., & Hattori, T. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00316-2 · Cited by 81
Haïat, G., Naïli, S., Grimal, Q., Talmant, M., Desceliers, C., & Soize, C. (2009) · The Journal of the Acoustical Society of America · doi:10.1121/1.3117445 · Cited by 79
Modern Surface Engineering Treatments
Aliofkhazraei, M. (2013) · InTech eBooks · doi:10.5772/50647 · Cited by 79
Fabrication of titanium scaffolds with porosity and pore size gradients by sequential freeze casting
Jung, H., Yook, S.-W., Kim, H., & Koh, Y. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.04.012 · Cited by 77
Melvin, J. W. (1993) · Journal of Biomechanical Engineering · doi:10.1115/1.2895538 · Cited by 76
Shi, X., Zhou, J., Zhao, Y., Li, L., & Wu, H. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200333 · Cited by 74
Bioinspired design of dental multilayers
Huang, M., Wang, R., Thompson, V. P., Rekow, D. E., & Soboyejo, W. O. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0662-0 · Cited by 71
Nanometer‐Scale Mapping of Elastic Modules in Biogenic Composites: The Nacre of Mollusk Shells
Drezner, H., Shilo, D., Dorogoy, A., & Zolotoyabko, E. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902165 · Cited by 69
Different approaches to produce coatings with bioactive glasses: Enamelling vs plasma spraying
Cannillo, V., & Sola, A. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.021 · Cited by 65
Self-citationZhu, Y., Wan, Y., Zhang, J., Yin, D., & Cheng, W. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.09.028 · Cited by 60
Local properties of a functionally graded interphase between cementum and dentin
Ho, S. P., Balooch, M., Marshall, S. J., & Marshall, G. W. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30105 · Cited by 60
Tomaszek, R., Pawłowski, L., Gengembre, L., et al. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.10.033 · Cited by 59
Choi, J., Konno, T., Takai, M., & Ishihara, K. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.006 · Cited by 53
Keeney, M. G., Waters, H., Barcay, K. R., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.028 · Cited by 52
Cattini, A., Bellucci, D., Sola, A., Pawłowski, L., & Cannillo, V. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.09.037 · Cited by 51
Self-citationTissue Engineering Stratified Scaffolds for Articular Cartilage and Subchondral Bone Defects Repair
Liu, M., Yu, X., Huang, F., Cen, S., Zhong, G., & Xiang, Z. (2013) · Orthopedics · doi:10.3928/01477447-20131021-10 · Cited by 50
Jamaludin, S. N. S., Mustapha, F. B., Nuruzzaman, D. M., & Basri, S. (2013) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · doi:10.5897/sre2012.0743 · Cited by 50
Design Optimization of Cementless Femoral Hip Prostheses Using Finite Element Analysis
Kowalczyk, P. (2001) · Journal of Biomechanical Engineering · doi:10.1115/1.1392311 · Cited by 49
Hazlehurst, K. B., Wang, C., & Stanford, M. (2013) · Medical Hypotheses · doi:10.1016/j.mehy.2013.10.012 · Cited by 46
Bailey, B. M., Nail, L. N., & Grunlan, M. A. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.012 · Cited by 45
Shanaghi, A., Chu, P. K.-H., Rouhaghdam, A. S., Xu, R., & Hu, T. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.07.063 · Cited by 40
Porous Titanium with Porosity Gradients for Biomedical Applications
Wen, C., Yamada, Y., Nouri, A., & Hodgson, P. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.539-543.720 · Cited by 39
Novel preparation of graded porous structures for medical engineering
Muthutantri, A., Huang, J., & Edirisinghe, M. J. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0092 · Cited by 37
Effects of Materials of Cementless Femoral Stem on the Functional Adaptation of Bone
Gong, H., Wu, W., Fang, J., Dong, X., Zhao, M., & Guo, T. (2012) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(11)60098-x · Cited by 36
Calcium phosphate scaffolds mimicking the gradient architecture of native long bones
Lindner, M., Bergmann, C., Telle, R., & Fischer, H. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35038 · Cited by 35
Finite element analysis on longitudinal and radial functionally graded femoral prosthesis
Oshkour, A. A., Osman, N. A. A., Davoodi, M. M., Yau, Y. H., Tarlochan, F., Abas, W. A. B. W., & Bayat, M. (2013) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2583 · Cited by 31
Surface acoustic wave depth profiling of a functionally graded material
Goossens, J., Leclaire, P., Xu, X., Glorieux, C., Martinez, L., Sola, A., Siligardi, C., Cannillo, V., der Donck, T. V., & Célis, J. (2007) · Journal of Applied Physics · doi:10.1063/1.2774002 · Cited by 29
Self-citationMechanical Aspects of Tissue Engineering
Liebschner, M. A. K., Bucklen, B., & Wettergreen, M. A. (2005) · Seminars in Plastic Surgery · doi:10.1055/s-2005-919717 · Cited by 28
Shapiro, I. M., & Risbud, M. V. (2013) · Springer eBooks · doi:10.1007/978-3-7091-1535-0_1 · Cited by 28
Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component
Wang, H. V., Johnston, S. R., & Rosen, D. W. (2006) · doi:10.26153/tsw/7122 · Cited by 28
Biodegradable Bi-layered coating on polymeric orthopaedic implants for controlled release of drugs
Argarate, N., Olalde, B., Atorrasagasti, G., Valero, J., Cifuentes, S. C., Benavente, R., Lieblich, M., & González-Carrasco, J. L. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.070 · Cited by 27
A Femur-Implant Model for the Prediction of Bone Remodeling Behavior Induced by Cementless Stem
Gong, H., Kong, L., Zhang, R., Fang, J., & Zhao, M. (2013) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(13)60230-9 · Cited by 24
Oshkour, A. A., Talebi, H., Shirazi, S. F. S., Yau, Y. H., Tarlochan, F., & Osman, N. A. A. (2014) · Artificial Organs · doi:10.1111/aor.12315 · Cited by 23
Bioceramics in Tissue Engineering
Yang, Y., Kang, Y., Sen, M., & Park, S. (2010) · Springer eBooks · doi:10.1007/978-3-7091-0385-2_7 · Cited by 22
Comparison of Various Functionally Graded Femoral Prostheses by Finite Element Analysis
Oshkour, A. A., Talebi, H., Shirazi, S. F. S., Bayat, M., Yau, Y. H., Tarlochan, F., & Osman, N. A. A. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/807621 · Cited by 20
Fejerskov, B., Jensen, N. B. S., Teo, B. M., Städler, B., & Zelikin, A. N. (2013) · Small · doi:10.1002/smll.201303101 · Cited by 20
Gradient Nanofiber Scaffolds for Tissue Engineering
Seidi, A., Sampathkumar, K., Srivastava, A., Ramakrishna, S., & Ramalingam, M. (2013) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2013.7187 · Cited by 18
Gradient composite materials for artificial intervertebral discs
Migacz, K., Chłopek, J., & Morawska-Chochół, A. (2012) · PubMed · doi:10.5277/abb140301 · Cited by 14
Tissue Engineering of Bone: A Primer for the Practicing Hand Surgeon
Taylor, E. D., Khan, Y., & Laurencin, C. T. (2009) · The Journal Of Hand Surgery · doi:10.1016/j.jhsa.2008.09.002 · Cited by 9
The narwhal ( Monodon monoceros ) cementum–dentin junction: A functionally graded biointerphase
Grandfield, K., Chattah, N. L., Djomehri, S. I., Eidelman, N., Eichmiller, F. C., Webb, S. M., Schuck, P. J., Nweeia, M., & Ho, S. P. (2014) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411914547553 · Cited by 8
Damage analysis on a graded porous biocomposite structure under flexural load using FEM
Tang, C. Y., Tsui, C. P., Wei, L., & Wang, Z. W. (2011) · Strength Fracture and Complexity · doi:10.3233/sfc-2012-0141 · Cited by 6
Cited by
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Sola, A., & Nouri, A. (2019) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10021 · Cited by 378
Self-citationIbrahim, M. Z., Sarhan, A. A. D., Yusuf, F., & Hamdi, M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.231 · Cited by 344
Mahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
Metadata
- Authors
- Sola, A., Bellucci, D., & Cannillo, V.
- Venue
- Biotechnology Advances
- Publisher
- Elsevier BV
- Published
- 2016-09
- Volume
- 34
- Issue
- 5
- Pages
- 504-531
- ISSN
- 0734-9750 (ISSN-L)
- OpenAlex
- W2211029996
- Cited by
- 314
- References
- 154
- FWCI
- 23.61
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.