The DOI matches its Crossref record; 131 of the 131 references it cites were found in a registry or an index.
Graphene inks for printed flexible electronics: Graphene dispersions, ink formulations, printing techniques and applications
Abstract
Graphene inks have recently enabled the dramatic improvement of printed flexible electronics due to their low cost, ease of processability, higher conductivity and flexibility. In this review, we discuss the state-of-the-art of the fundamental formulation of graphene inks and the current printing techniques used for inks deposition, followed by recent practical applications for printed flexible electronics. The progression of science and technology for the dispersion of graphene using variety of solvents and the characteristics of the resulting conductive inks have been highlighted, with specific emphasis focused on the challenges to be resolved. The printing techniques discussed here include screen printing, gravure printing, inkjet printing and other emerging printing technologies. Each approach's pros and cons are discussed in correlation with the ink formulations and the operating principles. We also discuss the challenges and outlook of graphene ink for its future development in the world of printed flexible devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Intermolecular and Surface Forces
(2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10024-6 · Cited by 16,923
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Ultrahigh electron mobility in suspended graphene
Bolotin, K. I., Sikes, K. J., Jiang, Z., Klima, M., Fudenberg, G., Hone, J., Kim, P., & Stormer, H. L. (2008) · Solid State Communications · doi:10.1016/j.ssc.2008.02.024 · Cited by 8,057
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Eda, G., Fanchini, G., & Chhowalla, M. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.83 · Cited by 4,379
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide
Schniepp, H. C., Li, J.-L., McAllister, M. J., Sai, H., Herrera-Alonso, M., Adamson, D. H., Prud'homme, R. K., Car, R., Saville, D. A., & Aksay, I. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp060936f · Cited by 3,476
Giant Intrinsic Carrier Mobilities in Graphene and Its Bilayer
Morozov, S. V., Novoselov, K. S., Katsnelson, M. I., Schedin, F., Elias, D. C., Jaszczak, J. A., & Geim, A. K. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.016602 · Cited by 3,460
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Approaching ballistic transport in suspended graphene
Du, X., Skachko, I., Barker, A., & Andrei, E. Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.199 · Cited by 3,258
Electronics based on two-dimensional materials
Fiori, G., Bonaccorso, F., Iannaccone, G., Palacios, T., Neumaier, D., Seabaugh, A., Banerjee, S. K., & Colombo, L. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.207 · Cited by 3,176
Graphene Based Electrochemical Sensors and Biosensors: A Review
Shao, Y., Wang, J., Wu, H., Liu, J., Aksay, I. A., & Lin, Y. (2010) · Electroanalysis · doi:10.1002/elan.200900571 · Cited by 3,124
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Stankovich, S., Piner, R. D., Chen, X., Wu, N., Nguyen, S. T., & Ruoff, R. S. (2006) · J. Mater. Chem. · doi:10.1039/b512799h · Cited by 2,590
Paton, K. R., Varrla, E., Backes, C., Smith, R. J., Khan, U., O’Neill, A., Boland, C., Lotya, M., Istrate, O. M., King, P., et al. (2014) · Nature Materials · doi:10.1038/nmat3944 · Cited by 2,401
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Liquid Phase Production of Graphene by Exfoliation of Graphite in Surfactant/Water Solutions
Lotya, M., Hernandez, Y., King, P. J., Smith, R. J., Nicolosi, V., Karlsson, L. S., Blighe, F. M., De, S., Wang, Z., McGovern, I. T., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807449u · Cited by 2,282
Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics
Fan, F. R., Tang, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201504299 · Cited by 1,918
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
The role of surfactants in dispersion of carbon nanotubes
Vaisman, L., Wagner, H. D., & Marom, G. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.11.007 · Cited by 1,492
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Klauk, H. (2010) · Chemical Society Reviews · doi:10.1039/b909902f · Cited by 1,337
Li, X., Magnuson, C. W., Venugopal, A., Tromp, R. M., Hannon, J. B., Vogel, E. M., Colombo, L., & Ruoff, R. S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja109793s · Cited by 1,274
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Grapheneviasonication assisted liquid-phase exfoliation
Ciesielski, A., & Samorì, P. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60217f · Cited by 1,207
Hanlon, D., Backes, C., Doherty, E., Cucinotta, C. S., Berner, N. C., Boland, C., Lee, K., Harvey, A., Lynch, P., Gholamvand, Z., et al. (2015) · Nature Communications · doi:10.1038/ncomms9563 · Cited by 1,104
Nanoparticle colloidal stability in cell culture media and impact on cellular interactions
Moore, T. L., Rodriguez-Lorenzo, L., Hirsch, V., Balog, S., Urban, D., Jud, C., Rothen-Rutishauser, B., Lattuada, M., & Petri-Fink, A. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00487f · Cited by 1,082
Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
High-Concentration, Surfactant-Stabilized Graphene Dispersions
Lotya, M., King, P. J., Khan, U., De, S., & Coleman, J. N. (2010) · ACS Nano · doi:10.1021/nn1005304 · Cited by 1,015
Fabrication of screen‐printing pastes from TiO2 powders for dye‐sensitised solar cells
Ito, S., Chen, P., Comte, P., Nazeeruddin, M. K., Liska, P., Péchy, P., & Grätzel, M. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.768 · Cited by 996
Liquid Exfoliation of Defect-Free Graphene
Coleman, J. N. (2013) · Accounts of Chemical Research · doi:10.1021/ar300009f · Cited by 971
All‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
Intermolecular and Surface Forces
(2011) · doi:10.1016/c2009-0-21560-1 · Cited by 871
Highly conductive, printable and stretchable composite films of carbon nanotubes and silver
Chun, K.-Y., Oh, Y., Rho, J., Ahn, J.-H., Kim, Y.-J., Choi, H. R., & Baik, S. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.232 · Cited by 859
Ho, P. S., & Kwok, T. (1989) · Reports on Progress in Physics · doi:10.1088/0034-4885/52/3/002 · Cited by 836
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Thin-film particles of graphite oxide 1:High-yield synthesis and flexibility of the particles
HIRATA, M., GOTOU, T., HORIUCHI, S., FUJIWARA, M., & OHBA, M. (2004) · Carbon · doi:10.1016/s0008-6223(04)00444-0 · Cited by 768
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Metal‐based nanoparticles and their toxicity assessment
Schrand, A. M., Rahman, M. F., Hussain, S. M., Schlager, J. J., Smith, D. A., & Syed, A. F. (2010) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.103 · Cited by 753
Innovations in 3D printing: a 3D overview from optics to organs
Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2014) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 753
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Applications of ionic liquids in electrochemical sensors
Wei, D., & Ivaska, A. (2008) · Analytica Chimica Acta · doi:10.1016/j.aca.2007.12.011 · Cited by 714
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Bakker, E., & Telting-Diaz, M. (2002) · Analytical Chemistry · doi:10.1021/ac0202278 · Cited by 662
3D Printing multifunctionality: structures with electronics
Espalin, D., Muse, D. W., MacDonald, E., & Wicker, R. B. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5717-7 · Cited by 614
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
High-Performance Plastic Transistors Fabricated by Printing Techniques
Bao, Z., Feng, Y., Dodabalapur, A., Raju, V. R., & Lovinger, A. J. (1997) · Chemistry of Materials · doi:10.1021/cm9701163 · Cited by 537
Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700902 · Cited by 529
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
Progress in nanogenerators for portable electronics
Wang, Z. L., Zhu, G., Yang, Y., Wang, S., & Pan, C. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70011-7 · Cited by 509
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Metal–metal bonding process using Ag metallo-organic nanoparticles
Ide, E., Angata, S., Hirose, A., & Kobayashi, K. F. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.01.047 · Cited by 500
Entropic forces between amphiphilic surfaces in liquids
Israelachvili, J. N., & Wennerstroem, H. (1992) · The Journal of Physical Chemistry · doi:10.1021/j100181a007 · Cited by 482
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Huang, L., Huang, Y., Liang, J., Wan, X., & Chen, Y. (2011) · Nano Research · doi:10.1007/s12274-011-0123-z · Cited by 458
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Le, L. T., Ervin, M. H., Qiu, H., Fuchs, B. E., & Lee, W. Y. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.01.023 · Cited by 420
Liu, Z., Wu, Z., Yang, S., Dong, R., Feng, X., & Müllen, K. (2016) · Advanced Materials · doi:10.1002/adma.201505304 · Cited by 411
Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection
Seekaew, Y., Lokavee, S., Phokharatkul, D., Wisitsoraat, A., Kerdcharoen, T., & Wongchoosuk, C. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.08.044 · Cited by 373
Application of Screen Printing in the Fabrication of Organic Light-Emitting Devices
Pardo, D. A., Jabbour, G. E., & Peyghambarian, N. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1249::aid-adma1249>3.0.co;2-y · Cited by 372
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 358
Scalable production of graphene via wet chemistry: progress and challenges
Zhong, Y. L., Tian, Z., Simon, G. P., & Li, D. (2015) · Materials Today · doi:10.1016/j.mattod.2014.08.019 · Cited by 355
Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks
Karagiannidis, P. G., Hodge, S. A., Lombardi, L., Tomarchio, F., Decorde, N., Milana, S., Goykhman, I., Su, Y., Mesite, S. V., Johnstone, D. N., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07735 · Cited by 348
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b03354 · Cited by 334
Moonen, P. F., Yakimets, I., & Huskens, J. (2012) · Advanced Materials · doi:10.1002/adma.201202949 · Cited by 304
The importance of repulsive potential barriers for the dispersion of graphene using surfactants
Smith, R. J., Lotya, M., & Coleman, J. N. (2010) · New Journal of Physics · doi:10.1088/1367-2630/12/12/125008 · Cited by 299
Wajid, A. S., Das, S., Irin, F., Ahmed, H. S. T., Shelburne, J. L., Parviz, D., Fullerton, R. J., Jankowski, A. F., Hedden, R. C., & Green, M. J. (2012) · Carbon · doi:10.1016/j.carbon.2011.09.008 · Cited by 295
Recent Advances in Sensing Applications of Graphene Assemblies and Their Composites
Tung, T. T., Nine, M. J., Krebsz, M., Pasinszki, T., Coghlan, C. J., Tran, D. N. H., & Losic, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702891 · Cited by 294
Liu, Z., Parvez, K., Li, R., Dong, R., Feng, X., & Müllen, K. (2015) · Advanced Materials · doi:10.1002/adma.201403826 · Cited by 292
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Micropatterning of Graphene Sheets by Inkjet Printing and Its Wideband Dipole‐Antenna Application
Shin, K., Hong, J., & Jang, J. (2011) · Advanced Materials · doi:10.1002/adma.201100345 · Cited by 252
Screen‐Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Xu, Y., Schwab, M. G., Strudwick, A. J., Hennig, I., Feng, X., Wu, Z., & Müllen, K. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300184 · Cited by 250
Introduction to Printed Electronics
Suganuma, K. (2014) · SpringerBriefs in Electrical and Computer Engineering · doi:10.1007/978-1-4614-9625-0 · Cited by 247
Tkalya, E. E., Ghislandi, M., de With, G., & Koning, C. E. (2012) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2012.03.001 · Cited by 244
Huang, L., Wang, Z., Zhang, J., Pu, J., Lin, Y., Xu, S., Shen, L., Chen, Q., & Shi, W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500843p · Cited by 238
Recent advances in upscalable wet methods and ink formulations for printed electronics
Aleeva, Y., & Pignataro, B. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00618f · Cited by 225
Cao, X., Chen, H., Gu, X., Liu, B., Wang, W., Cao, Y., Wu, F., & Zhou, C. (2014) · ACS Nano · doi:10.1021/nn505979j · Cited by 217
Inkjet-printed energy storage device using graphene/polyaniline inks
Xu, Y., Hennig, I., Freyberg, D., James Strudwick, A., Georg Schwab, M., Weitz, T., & Chih-Pei Cha, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.096 · Cited by 214
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Zhong, J., Zhou, G.-X., He, P.-G., Yang, Z.-H., & Jia, D.-C. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.102 · Cited by 208
Highly Flexible and Conductive Printed Graphene for Wireless Wearable Communications Applications
Huang, X., Leng, T., Zhu, M., Zhang, X., Chen, J., Chang, K., Aqeeli, M., Geim, A. K., Novoselov, K. S., & Hu, Z. (2015) · Scientific Reports · doi:10.1038/srep18298 · Cited by 202
Scalable, Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors
Hyun, W. J., Secor, E. B., Kim, C., Hersam, M. C., Francis, L. F., & Frisbie, C. D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700285 · Cited by 202
Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates
Gao, Y., Shi, W., Wang, W., Leng, Y., & Zhao, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie502675z · Cited by 189
Conductive Screen Printing Inks by Gelation of Graphene Dispersions
Arapov, K., Rubingh, E., Abbel, R., Laven, J., de With, G., & Friedrich, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504030 · Cited by 183
Foldable Graphene Electronic Circuits Based on Paper Substrates
Hyun, W. J., Park, O. O., & Chin, B. D. (2013) · Advanced Materials · doi:10.1002/adma.201302063 · Cited by 178
High-Concentration Aqueous Dispersions of Graphene Using Nonionic, Biocompatible Block Copolymers
Seo, J.-W. T., Green, A. A., Antaris, A. L., & Hersam, M. C. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2003556 · Cited by 175
Graphene-based large area dye-sensitized solar cell modules
Casaluci, S., Gemmi, M., Pellegrini, V., Carlo, A. D., & Bonaccorso, F. (2016) · Nanoscale · doi:10.1039/c5nr07971c · Cited by 167
All-polymer capacitor fabricated with inkjet printing technique
Liu, Y., Cui, T., & Varahramyan, K. (2003) · Solid-State Electronics · doi:10.1016/s0038-1101(03)00082-0 · Cited by 162
Gravure printing of conductive particulate polymer inks on flexible substrates
Pudas, M., Halonen, N., Granat, P., & Vähäkangas, J. (2005) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2005.07.008 · Cited by 160
Jagt, J. C. (1998) · IEEE Transactions on Components Packaging and Manufacturing Technology Part A · doi:10.1109/95.705467 · Cited by 160
Graphene for energy harvesting/storage devices and printed electronics
Grande, L., Chundi, V. T., Wei, D., Bower, C., Andrew, P., & Ryhänen, T. (2012) · Particuology · doi:10.1016/j.partic.2011.12.001 · Cited by 149
Flexible Gigahertz Transistors Derived from Solution-Based Single-Layer Graphene
Sire, C., Ardiaca, F., Lépilliet, S., Seo, J.-W. T., Hersam, M. C., Dambrine, G., Happy, H., & Derycke, V. (2012) · Nano Letters · doi:10.1021/nl203316r · Cited by 144
A Study of Screen Printed Yttria‐Stabilized Zirconia Layers for Solid Oxide Fuel Cells
Dollen, P. V., & Barnett, S. A. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00625.x · Cited by 135
Tùng, T. T., Yoo, J. H., Alotaibi, F., Nine, M. J., Karunagaran, R., Krebsz, M., Nguyen, G. T., Tran, D., Feller, J., & Lošić, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04872 · Cited by 128
Organic photovoltaic modules fabricated by an industrial gravure printing proofer
Yang, J., Vak, D., Clark, N. B., Subbiah, J., Wong, W. W. H., Jones, D. J., Watkins, S. E., & Wilson, G. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.10.018 · Cited by 118
Preparation of graphene sheets by the reduction of carbon monoxide
Kim, C. D., Min, B., & Jung, W.-S. (2009) · Carbon · doi:10.1016/j.carbon.2009.02.025 · Cited by 116
Ayán-Varela, M., Paredes, J. I., Guardia, L., Villar-Rodil, S., Munuera, J., Díaz‐González, M., Fernández‐Sánchez, C., Martínez-Alonso, A., & Tascón, J. M. D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00910 · Cited by 114
Mustonen, T., Kordás, K., Saukko, S., Tóth, G., Penttilä, J. S., Helistö, P., Seppä, H., & Jantunen, H. M. (2007) · physica status solidi (b) · doi:10.1002/pssb.200776186 · Cited by 112
Inkjet-printed graphene electrodes for dye-sensitized solar cells
Dodoo‐Arhin, D., Howe, R. C. T., Hu, G., Zhang, Y., Hiralal, P., Bello, A., Amaratunga, G. A. J., & Hasan, T. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.012 · Cited by 111
3D printing of highly flexible supercapacitor designed for wearable energy storage
Areir, M., Xu, Y., Harrison, D. J., & Fyson, J. (2017) · Materials Science and Engineering B · doi:10.1016/j.mseb.2017.09.004 · Cited by 106
High shear-induced exfoliation of graphite into high quality graphene by Taylor–Couette flow
Tran, T. S., Park, S. J., Yoo, S. S., et al. (2016) · RSC Advances · doi:10.1039/c5ra22273g · Cited by 105
Self-citationThree-dimensional multi-recognition flexible wearable sensor via graphene aerogel printing
An, B., Ma, Y., Li, W., Su, M., Li, F., & Song, Y. (2016) · Chemical Communications · doi:10.1039/c6cc05910d · Cited by 97
Enabling Inkjet Printed Graphene for Ion Selective Electrodes with Postprint Thermal Annealing
He, Q., Das, S. R., Garland, N. T., Jing, D., Hondred, J. A., Cargill, A. A., Ding, S., Karunakaran, C., & Claussen, J. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00092 · Cited by 96
Poly(ionic liquid)-stabilized graphene sheets and their hybrid with poly(3,4-ethylenedioxythiophene)
Tùng, T. T., Kim, T. Y., Shim, J. P., et al. (2011) · Organic Electronics · doi:10.1016/j.orgel.2011.09.012 · Cited by 82
Tùng, T. T., Pham‐Huu, C., Janowska, I., et al. (2015) · Small · doi:10.1002/smll.201403693 · Cited by 70
Secor, E. B., Smith, J. N., Marks, T. J., & Hersam, M. C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02730 · Cited by 70
Graphene nano-ink biosensor arrays on a microfluidic paper for multiplexed detection of metabolites
Labroo, P., & Cui, Y. (2014) · Analytica Chimica Acta · doi:10.1016/j.aca.2014.01.024 · Cited by 69
Overgaard, M. H., Kühnel, M., Hvidsten, R., Petersen, S. V., Vosch, T., Nørgaard, K., & Laursen, B. W. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700011 · Cited by 69
Polymer/Pristine Graphene Based Composites: From Emulsions to Strong, Electrically Conducting Foams
Woltornist, S. J., Carrillo, J. Y., Xu, T. O., Dobrynin, A. V., & Adamson, D. H. (2015) · Macromolecules · doi:10.1021/ma5024236 · Cited by 66
Flexible solid state lithium batteries based on graphene inks
Wei, D., Andrew, P., Yang, H., Jiang, Y., Li, F., Shan, C., Ruan, W., Han, D., Niu, L., Bower, C., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10826c · Cited by 63
Annealed graphene sheets decorated with silver nanoparticles for inkjet printing
Wang, G., Wang, Z., Liu, Z., Xue, J., Xin, G., Yu, Q., Lian, J., & Chen, M. Y. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.037 · Cited by 58
Graphene-philic surfactants for nanocomposites in latex technology
Mohamed, A., Ardyani, T., Bakar, S. A., Brown, P., Hollamby, M. J., Sagisaka, M., & Eastoe, J. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.01.003 · Cited by 45
Cited by
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Mallakpour, S., Azadi, E., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102436 · Cited by 178
Metadata
- Authors
- Tran, T. S., Dutta, N. K., & Choudhury, N. R.
- Venue
- Advances in Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 261
- Pages
- 41-61
- ISSN
- 0001-8686 (ISSN-L)
- OpenAlex
- W2894535586
- Cited by
- 298
- References
- 131
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.