The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Current state and barriers to the circular economy in the building sector: Towards a mitigation framework
Open accessAbstract
The building sector is amongst the major resource consuming and waste generating sectors of the economy. The paradigm of the circular economy has the potential to overcome the problems resulted due to adoption of the linear economic model by the building sector. The circular economy offers a new perspective for industrial ecosystems including materials and products being fed back into the supply chain as resources, thereby resulting in reduced consumption of primary resources and waste generation. The research on circular economy increased rapidly during recent years; however, a research gap exists on the assessment of current state and barriers to the circular economy in the building sector of developing countries. This study has developed and used a circular economy assessment scale for the building sector of developing countries. It is found that the current state of circular economy implementation in the building sector is unsatisfactory. Out of the seven circular economy dimensions used for analysis, the energy dimension showed the best performance and the waste dimension showed the worst performance. Serious steps are required by all the stakeholders of the building sector to improve the adoption of the circular economy. Furthermore, interpretive structural modeling (ISM) and matrice d’Impacts croises-multipication applique an classment (MICMAC) techniques are used to identify and classify the key barriers to the circular economy. It is found that a lack of environmental regulations and laws is driving the rest of the barriers to the circular economy. Equally critical is the lack of public awareness and support from public institutions. Finally, a mitigation framework for the building sector of developing countries is proposed, which is an addition to the circular economy existing body of knowledge. The proposed framework could serve as a guideline for decision and policymakers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three Approaches to Qualitative Content Analysis
Hsieh, H.-F., & Shannon, S. E. (2005) · Qualitative Health Research · doi:10.1177/1049732305276687 · Cited by 44,601
Making sense of cronbach’s alpha.
Tavakol, M., & Dennick, R. (2011) · International Journal of Medical Education · doi:10.5116/ijme.4dfb.8dfd · Cited by 15,126
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Barriers to the Circular Economy: Evidence From the European Union (EU)
Kirchherr, J., Piscicelli, L., Bour, R., Kostense-Smit, E., Muller, J., Huibrechtse-Truijens, A., & Hekkert, M. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2018.04.028 · Cited by 1,903
Govindan, K., & Hasanagic, M. (2018) · International Journal of Production Research · doi:10.1080/00207543.2017.1402141 · Cited by 1,522
A review of the circular economy in China: moving from rhetoric to implementation
Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.020 · Cited by 1,429
Causes and effects of delays in Malaysian construction industry
Sambasivan, M., & Soon, Y. W. (2007) · International Journal of Project Management · doi:10.1016/j.ijproman.2006.11.007 · Cited by 1,422
How do scholars approach the circular economy? A systematic literature review
Merli, R., Preziosi, M., & Acampora, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.112 · Cited by 1,358
Rizos, V., Behrens, A., Van der Gaast, W., Hofman, E., Ioannou, A., Kafyeke, T., Flamos, A., Rinaldi, R., Papadelis, S., Hirschnitz-Garbers, M., et al. (2016) · Sustainability · doi:10.3390/su8111212 · Cited by 1,265
Circular economy for the built environment: A research framework
Pomponi, F., & Moncaster, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.055 · Cited by 1,169
Lost in transition? Drivers and Barriers in the Eco-innovation Road to the Circular Economy
de Jesus, A., & Mendonça, S. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2017.08.001 · Cited by 1,167
Braungart, M., McDonough, W., & Bollinger, A. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.08.003 · Cited by 1,073
Construction and demolition waste management in China through the 3R principle
Huang, B., Wang, X., Kua, H., Geng, Y., Bleischwitz, R., & Ren, J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.029 · Cited by 1,047
Developing Interconnection Matrices in Structural Modeling
Warfield, J. N. (1974) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1974.5408524 · Cited by 1,016
Towards a national circular economy indicator system in China: an evaluation and critical analysis
Geng, Y., Fu, J., Sarkis, J., & Xue, B. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.07.005 · Cited by 911
Measuring circular economy strategies through index methods: A critical analysis
Elia, V., Gnoni, M. G., & Tornese, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.196 · Cited by 892
Systems approaches to integrated solid waste management in developing countries
Marshall, R. E., & Farahbakhsh, K. (2013) · Waste Management · doi:10.1016/j.wasman.2012.12.023 · Cited by 883
Matrix Analysis as a Complementary Analytic Strategy in Qualitative Inquiry
Averill, J. B. (2002) · Qualitative Health Research · doi:10.1177/10432302012006011 · Cited by 839
Jacobsen, N. B. (2006) · Journal of Industrial Ecology · doi:10.1162/108819806775545411 · Cited by 816
Construction and demolition waste best management practice in Europe
Gálvez-Martos, J.-L., Styles, D., Schoenberger, H., & Zeschmar-Lahl, B. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.016 · Cited by 816
Circular Economy Policies in China and Europe
McDowall, W., Geng, Y., Huang, B., Barteková, E., Bleischwitz, R., Türkeli, S., Kemp, R., & Doménech, T. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12597 · Cited by 709
Unlocking circular business: A framework of barriers and drivers
Tura, N., Hanski, J., Ahola, T., Ståhle, M., Piiparinen, S., & Valkokari, P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.202 · Cited by 698
Energy consumption and efficiency in buildings: current status and future trends
Allouhi, A., El Fouih, Y., Kousksou, T., Jamil, A., Zeraouli, Y., & Mourad, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.139 · Cited by 690
Circular economy in construction: current awareness, challenges and enablers
Adams, K. T., Osmani, M., Thorpe, T., & Thornback, J. (2017) · Proceedings of the Institution of Civil Engineers - Waste and Resource Management · doi:10.1680/jwarm.16.00011 · Cited by 624
Barriers to effective circular supply chain management in a developing country context
Mangla, S. K., Luthra, S., Mishra, N., Singh, A., Rana, N. P., Dora, M., & Dwivedi, Y. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449265 · Cited by 610
Trend of the research on construction and demolition waste management
Yuan, H., & Shen, L. (2011) · Waste Management · doi:10.1016/j.wasman.2010.10.030 · Cited by 574
Circular Economy in Spanish SMEs: Challenges and opportunities
Ormazabal, M., Prieto-Sandoval, V., Puga-Leal, R., & Jaca, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.031 · Cited by 565
Pauliuk, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.019 · Cited by 554
López Ruiz, L. A., Roca Ramón, X., & Gassó Domingo, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119238 · Cited by 538
Characterizing the generation and flows of construction and demolition waste in China
Zheng, L., Wu, H., Zhang, H., Duan, H., Wang, J., Jiang, W., Dong, B., Liu, G., Zuo, J., & Song, Q. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.055 · Cited by 535
Prioritizing barriers to adopt circular economy in construction and demolition waste management
Mahpour, A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.026 · Cited by 490
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Masi, D., Kumar, V., Garza-Reyes, J. A., & Godsell, J. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449246 · Cited by 409
Resource duration as a managerial indicator for Circular Economy performance
Franklin-Johnson, E., Figge, F., & Canning, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.023 · Cited by 377
Estimation of construction waste generation and management in Thailand
Kofoworola, O. F., & Gheewala, S. H. (2009) · Waste Management · doi:10.1016/j.wasman.2008.07.004 · Cited by 346
Liu, Y., & Bai, Y. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.04.002 · Cited by 339
Peer Reviewed: Applying the Principles of Green Engineering to Cradle-to-Cradle Design
McDonough, W., Braungart, M., Anastas, P. T., & Zimmerman, J. B. (2003) · Environmental Science & Technology · doi:10.1021/es0326322 · Cited by 325
The material basis of the global economy
Behrens, A., Giljum, S., Kovanda, J., & Niza, S. (2007) · Ecological Economics · doi:10.1016/j.ecolecon.2007.02.034 · Cited by 286
An ISM approach for modelling the enablers of flexible manufacturing system: the case for India
Raj, T. S., Shankar, R., & Suhaib, M. (2008) · International Journal of Production Research · doi:10.1080/00207540701429926 · Cited by 278
Wu, H.-Q., Shi, Y., Xia, Q., & Zhu, W.-D. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.003 · Cited by 277
Attributes of UK construction clients influencing project consultants' performance
Kometa, S. T., Olomolaiye, P. O., & HARRIS, F. C. (1994) · Construction Management and Economics · doi:10.1080/01446199400000053 · Cited by 271
Strategies for Applying the Circular Economy to Prefabricated Buildings
Minunno, R., O’Grady, T., Morrison, G. M., Gruner, R. L., & Colling, M. (2018) · Buildings · doi:10.3390/buildings8090125 · Cited by 270
Lu, W., Yuan, H., Li, J., Hao, J. J. L., Mi, X., & Ding, Z. (2011) · Waste Management · doi:10.1016/j.wasman.2010.12.004 · Cited by 266
Ghisellini, P., Ji, X., Liu, G., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.084 · Cited by 244
Design of indicators for measuring product performance in the circular economy
Cayzer, S., Griffiths, P., & Beghetto, V. (2017) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2017.1333543 · Cited by 243
Xue, B., Chen, X.-P., Geng, Y., Guo, X.-J., Lu, C.-P., Zhang, Z.-L., & Lu, C.-Y. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.05.010 · Cited by 214
Benchmarks for sustainable construction
Zimmermann, M., Althaus, H.-J., & Haas, A. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.06.017 · Cited by 209
China's energy consumption in the building sector: A life cycle approach
Zhang, Y., He, C.-Q., Tang, B.-J., & Wei, Y.-M. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.03.011 · Cited by 209
Wu, Y., Shen, J., Zhang, X., Skitmore, M., & Lu, W. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.121 · Cited by 200
Nuñez-Cacho, P., Górecki, J., Molina-Moreno, V., & Corpas-Iglesias, F. A. (2018) · Sustainability · doi:10.3390/su10072340 · Cited by 182
Mode of circular economy in China's iron and steel industry: a case study in Wu'an city
Ma, S.-H., Wen, Z.-G., Chen, J.-N., & Wen, Z.-C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.008 · Cited by 181
Richer and cleaner? A study on carbon dioxide emissions in developing countries
Galeotti, M., & Lanza, A. (1999) · Energy Policy · doi:10.1016/s0301-4215(99)00047-6 · Cited by 181
Rationale for and Interpretation of Economy‐Wide Materials Flow Analysis and Derived Indicators
Bringezu, S., Schütz, H., & Moll, S. (2003) · Journal of Industrial Ecology · doi:10.1162/108819803322564343 · Cited by 180
Circular Business Model Challenges and Lessons Learned—An Industrial Perspective
Oghazi, P., & Mostaghel, R. (2018) · Sustainability · doi:10.3390/su10030739 · Cited by 179
Govindan, K., Madan Shankar, K., & Kannan, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.092 · Cited by 174
Material Footprint Assessment in a Global Input‐Output Framework
Giljum, S., Brückner, M., & Martinez, A. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12214 · Cited by 172
Regional water footprint evaluation in China: A case of Liaoning
Dong, H., Geng, Y., Sarkis, J., Fujita, T., Okadera, T., & Xue, B. (2013) · Science of The Total Environment · doi:10.1016/j.scitotenv.2012.10.049 · Cited by 169
Environmental benefits arising from demountable steel-concrete composite floor systems in buildings
Brambilla, G., Lavagna, M., Vasdravellis, G., & Castiglioni, C. A. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.014 · Cited by 146
Ortiz, O., Castells, F., & Sonnemann, G. (2010) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2010.02.021 · Cited by 145
Ahmad, Z., Thaheem, M. J., & Maqsoom, A. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.03.032 · Cited by 144
Self-citationCircular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals
Giurco, D., Littleboy, A. K., Boyle, T., Fyfe, J., & White, S. B. (2014) · Resources · doi:10.3390/resources3020432 · Cited by 142
The evolution of construction waste sorting on-site
Yuan, H., Lu, W., & Hao, J. J. L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.012 · Cited by 136
Barriers to MNEs green business models in the UK construction sector: An ISM analysis
Abuzeinab, A., Arif, M., & Qadri, M. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.003 · Cited by 119
The environment: the fourth construction project objective?
Ofori, G. (1992) · Construction Management and Economics · doi:10.1080/01446199200000037 · Cited by 115
TOWARDS CIRCULAR ECONOMY: ANALYSIS OF INDICATORS IN THE CONTEXT OF SUSTAINABLE DEVELOPMENT
Banaitė, D. (2016) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 105
Overview on Green Building Label in China
Ye, L., Cheng, Z., Wang, Q., Lin, W., & Ren, F. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.11.022 · Cited by 100
Ling-ling, H., & Yuan, H. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120928 · Cited by 94
Environmental management systems' awareness: an investigation of top 50 contractors in Egypt
Sakr, D., Sherif, A., & El‐Haggar, S. M. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.09.021 · Cited by 82
Evaluation of the circular economy development level of Chinese chemical enterprises
Li, R. H., & Su, C. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.01.151 · Cited by 66
A review of public-private partnership: critical factors of concession period
Ullah, F., Ayub, B., Qayyum, S., & Thaheem, M. J. (2016) · Journal of Financial Management of Property and Construction · doi:10.1108/jfmpc-02-2016-0011 · Cited by 53
Self-citationJiang, G. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.03.023 · Cited by 50
Governing solid waste management in Mazatenango, Guatemala: Problems and prospects
Yousif, D. F., & Scott, S. (2007) · International Development Planning Review · doi:10.3828/idpr.29.4.2 · Cited by 45
Buyle, M., Braet, J., Audenaert, A., & Debacker, W. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.114 · Cited by 35
Business waste prevention: a review of the evidence
Wilson, D. C., Parker, D., Cox, J., Strange, K., Willis, P., Blakey, N. C., & Raw, L. (2012) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x12453609 · Cited by 29
Research on the Evaluation System of Circular Economy Development of Three Gorges Reservoir Region
Liu, D. K. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.446-447.1375 · Cited by 2
Cited by
Circular economy strategies for combating climate change and other environmental issues
Yang, M., Chen, L., Wang, J., Msigwa, G., Osman, A. I., Fawzy, S., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01499-6 · Cited by 835
Issues, Impacts, and Mitigations of Carbon Dioxide Emissions in the Building Sector
Ahmed Ali, K., Ahmad, M. I., & Yusup, Y. (2020) · Sustainability · doi:10.3390/su12187427 · Cited by 437
Purchase, C. K., Al Zulayq, D. M., O’Brien, B. T., Kowalewski, M. J., Berenjian, A., Tarighaleslami, A. H., & Seifan, M. (2021) · Materials · doi:10.3390/ma15010076 · Cited by 357
Giorgi, S., Lavagna, M., Wang, K., Osmani, M., Liu, G., & Campioli, A. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130395 · Cited by 346
AlJaber, A., Martinez-Vazquez, P., & Baniotopoulos, C. (2023) · Buildings · doi:10.3390/buildings13112778 · Cited by 130
Metadata
- Authors
- Bilal, M., Khan, K. I. A., Thaheem, M. J., & Nasir, A. R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 276
- Pages
- 123250
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3045401950
- Cited by
- 286
- References
- 78
- FWCI
- 34.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.