The DOI matches its Crossref record; 222 of the 222 references it cites were found in a registry or an index.
The role of additive manufacturing for biomedical applications: A critical review
Abstract
Abstract Additive manufacturing (AM) is a digital manufacturing technology, rapidly revolutionizing in the medical sectors for printing of distinct body parts having intrinsic shapes and offering customized solutions to every patient. In the past few decades, AM is used as a versatile and cost-effective method for the manufacturing of geometrically complicated shape in the medical industry. In addition, AM technology is used for the development of products from dental implants to heart valves and joint replacements etc. This is the technology that makes a physical model directly from CAD models by adding materials in layer by layer fashion and offers robust mechanical properties. This review paper aims to consolidate the contribution of various researchers in the area of AM especially focusing the applications in the medical field using various technologies of AM, materials and their mechanical properties, so that this review paper could become the torch bearer for the futuristic researchers working in this area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
The future of dental devices is digital
van Noort, R. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.014 · Cited by 1,408
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Characterization and Analysis of Porosity and Pore Structures
Anovitz, L. M., & Cole, D. R. (2015) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2015.80.04 · Cited by 1,090
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Flow-enhanced vascularization and maturation of kidney organoids in vitro
Homan, K. A., Gupta, N., Kroll, K. T., Kolesky, D. B., Skylar-Scott, M., Miyoshi, T., Mau, D., Valerius, M. T., Ferrante, T., Bonventre, J. V., et al. (2019) · Nature Methods · doi:10.1038/s41592-019-0325-y · Cited by 939
Development of biocompatible synthetic extracellular matrices for tissue engineering
Kim, B.-S., & Mooney, D. J. (1998) · Trends in Biotechnology · doi:10.1016/s0167-7799(98)01191-3 · Cited by 931
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Innovations in 3D printing: a 3D overview from optics to organs
Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2014) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 753
Making mass customization work
Pine, B. J., & Victor, B. I. (1993) · Harvard business review · Cited by 722
Tan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Progress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Calcium phosphate coatings on magnesium alloys for biomedical applications: A review
Shadanbaz, S., & Dias, G. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.016 · Cited by 651
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation
Wu, D., Rosen, D. W., Wang, L., & Schaefer, D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.07.006 · Cited by 614
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
A review on magnesium alloys as biodegradable materials
Gu, X.-N., & Zheng, Y.-F. (2010) · Frontiers of Materials Science in China · doi:10.1007/s11706-010-0024-1 · Cited by 598
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Wong, H. M., Yeung, K. W. K., Lam, K. O., Tam, V., Chu, P. K., Luk, K. D. K., & Cheung, K. M. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.111 · Cited by 579
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Aliphatic Polyesters: Great Degradable Polymers That Cannot Do Everything
Vert, M. (2005) · Biomacromolecules · doi:10.1021/bm0494702 · Cited by 565
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469
Biomimetic Scaffolds for Tissue Engineering
Kim, T. G., Shin, H., & Lim, D. W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201103083 · Cited by 459
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., Garcia, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 454
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Porous hydroxyapatite for artificial bone applications
Sopyan, I., Mel, M., Ramesh, S., et al. (2007) · Science and Technology of Advanced Materials · doi:10.1016/j.stam.2006.11.017 · Cited by 423
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Wiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Parthasarathy, J., Starly, B., & Raman, S. (2011) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2011.01.004 · Cited by 392
Emerging Applications of Bedside 3D Printing in Plastic Surgery
Chae, M. P., Rozen, W. M., McMenamin, P. G., Findlay, M. W., Spychal, R. T., & Hunter-Smith, D. J. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00025 · Cited by 377
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Bartolomeu, F., Buciumeanu, M., Pinto, E., Alves, N., Carvalho, O., Silva, F. S., & Miranda, G. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.007 · Cited by 364
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Rational Design and Enhanced Biocompatibility of a Dry Adhesive Medical Skin Patch
Kwak, M. K., Jeong, H., & Suh, K. Y. (2011) · Advanced Materials · doi:10.1002/adma.201101694 · Cited by 342
Functionally graded materials classifications and development trends from industrial point of view
El-Galy, I. M., Saleh, B., & Ahmed, M. H. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1413-4 · Cited by 339
Mahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
Hinojos, A., Mireles, J., Reichardt, A., Frigola, P., Hosemann, P., Murr, L. E., & Wicker, R. B. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.041 · Cited by 337
Biodegradable self-reinforced composite materials; Manufacturing structure and mechanical properties
Törmälä, P. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90081-4 · Cited by 332
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Salmi, M., Paloheimo, K.-S., Tuomi, J., Wolff, J., & Mäkitie, A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2012.11.041 · Cited by 330
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319
Grafahrend, D., Heffels, K.-H., Beer, M. V., Gasteier, P., Möller, M., Boehm, G., Dalton, P. D., & Groll, J. (2011) · Nature Materials · doi:10.1038/nmat2904 · Cited by 315
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H. (2019) · Applied Sciences · doi:10.3390/app9081713 · Cited by 309
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Biodegradable magnesium implants for orthopedic applications
Waizy, H., Seitz, J.-M., Reifenrath, J., Weizbauer, A., Bach, F.-W., Meyer-Lindenberg, A., Denkena, B., & Windhagen, H. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6572-2 · Cited by 297
Niu, X., Feng, Q., Wang, M., Guo, X., & Zheng, Q. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.11.020 · Cited by 296
Banks, J. P. (2013) · IEEE Pulse · doi:10.1109/mpul.2013.2279617 · Cited by 293
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
Iron–manganese: new class of metallic degradable biomaterials prepared by powder metallurgy
Hermawan, H., Alamdari, H., Mantovani, D., & Dubé, D. (2008) · Powder Metallurgy · doi:10.1179/174329008x284868 · Cited by 287
Comparative performance of three ceramic bone graft substitutes
Hing, K. A., Wilson, L. F., & Buckland, T. (2007) · The Spine Journal · doi:10.1016/j.spinee.2006.07.017 · Cited by 287
Ibrahim, D., Broilo, T. L., Heitz, C., de Oliveira, M. G., de Oliveira, H. W., Nobre, S. M. W., dos Santos Filho, J. H. G., & Silva, D. N. (2009) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.10.008 · Cited by 285
Orthopaedic applications of hydroxyapatite
Oonishi, H. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90196-h · Cited by 280
Rapid prototyping in dentistry: technology and application
Liu, Q., Leu, M. C., & Schmitt, S. M. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-2523-2 · Cited by 278
Three-dimensional printing surgical instruments: are we there yet?
Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014) · Journal of Surgical Research · doi:10.1016/j.jss.2014.02.020 · Cited by 275
Repair of cranial bone defects with adipose derived stem cells and coral scaffold in a canine model
Cui, L., Liu, B., Liu, G., Zhang, W., Cen, L., Sun, J., Yin, S., Liu, W., & Cao, Y. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.042 · Cited by 274
Applications of 3D printing in healthcare
Dodziuk, H. (2016) · Polish Journal of Cardio-Thoracic Surgery · doi:10.5114/kitp.2016.62625 · Cited by 272
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
Mass customizing products and services
Pine, B. J. (1993) · Planning Review · doi:10.1108/eb054420 · Cited by 250
3D Printing—Encompassing the Facets of Dentistry
Oberoi, G., Nitsch, S., Edelmayer, M., Janjić, K., Müller, A. S., & Agis, H. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00172 · Cited by 250
Chronology of Bioactive Glass Development and Clinical Applications
Hench, L. L. (2013) · New Journal of Glass and Ceramics · doi:10.4236/njgc.2013.32011 · Cited by 249
Ye, Y., Yu, J., Wang, C., Nguyen, N., Walker, G. M., Buse, J. B., & Gu, Z. (2016) · Advanced Materials · doi:10.1002/adma.201506025 · Cited by 236
The use of rapid prototyping to assist medical applications
Gibson, I., Cheung, L. K., Chow, S. P., Cheung, W. L., Beh, S. L., Savalani, M., & Lee, S. H. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610637273 · Cited by 233
Porous diopside (CaMgSi2O6) scaffold: A promising bioactive material for bone tissue engineering
Wu, C., Ramaswamy, Y., & Zreiqat, H. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.022 · Cited by 229
Noorani, R. (2006) · Cited by 228
Polymer-hydroxyapatite composites for biodegradable bone fillers
Higashi, S., Yamamuro, T., Nakamura, T., Ikada, Y., Hyon, S.-H., & Jamshidi, K. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90099-2 · Cited by 228
Three-dimensional drug printing: A structured review
Ursan, I. D., Chiu, L., & Pierce, A. (2013) · Journal of the American Pharmacists Association · doi:10.1331/japha.2013.12217 · Cited by 227
Liu, X., Rahaman, M. N., Hilmas, G. E., & Bal, B. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.026 · Cited by 223
Go, J., Schiffres, S. N., Stevens, A. G., & Hart, A. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.03.007 · Cited by 223
Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., & Loh, Y. T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.024 · Cited by 220
Clinical efficacy and effectiveness of 3D printing: a systematic review
Diment, L. E., Thompson, M. S., & Bergmann, J. H. M. (2017) · BMJ Open · doi:10.1136/bmjopen-2017-016891 · Cited by 220
Physical and chemical aspects of calcium phosphates used in spinal surgery
M., B. (2001) · European Spine Journal · doi:10.1007/s005860100276 · Cited by 211
Combating hot corrosion of boiler tubes – A study
Kumar, S., Kumar, M., & Handa, A. (2018) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2018.08.004 · Cited by 207
Self-citationPeter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3<314::aid-jbm10>3.0.co;2-w · Cited by 206
Ackland, D. C., Robinson, D. L., Redhead, M., Lee, P. V. S., Moskaljuk, A., & Dimitroulis, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.048 · Cited by 206
Ripley, B., Kelil, T., Cheezum, M. K., Goncalves, A., Di Carli, M. F., Rybicki, F. J., Steigner, M., Mitsouras, D., & Blankstein, R. (2016) · Journal of Cardiovascular Computed Tomography · doi:10.1016/j.jcct.2015.12.004 · Cited by 205
Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: a review
Pérez, B., Nykvist, H., Brøgger, A. F., Larsen, M. B., & Falkeborg, M. F. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2019.02.090 · Cited by 205
Pardeike, J., Strohmeier, D. M., Schrödl, N., Voura, C., Gruber, M., Khinast, J. G., & Zimmer, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.08.033 · Cited by 204
Hydroxyapatite ceramic as a bone substitute
Heise, U., Osborn, J. F., & Duwe, F. (1990) · International Orthopaedics · doi:10.1007/bf00178768 · Cited by 203
3D printed PLA-based scaffolds: A versatile tool in regenerative medicine
Serra, T., Mateos-Timoneda, M. A., Planell, J. A., & Navarro, M. (2013) · Organogenesis · doi:10.4161/org.26048 · Cited by 197
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Kanko, J. A., Sibley, A. P., & Fraser, J. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.12.024 · Cited by 197
Material Properties of Ti6Al4V Parts Produced by Laser Metal Deposition
Yu, J., Rombouts, M., Maes, G., & Motmans, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.056 · Cited by 193
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Bakarich, S. E., Gorkin, R., in het Panhuis, M., & Spinks, G. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503878d · Cited by 192
Wu, C., Ramaswamy, Y., Zhu, Y., Zheng, R., Appleyard, R., Howard, A., & Zreiqat, H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.029 · Cited by 192
Inkjet printing as a novel medicine formulation technique
Scoutaris, N., Alexander, M. R., Gellert, P. R., & Roberts, C. J. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.07.033 · Cited by 188
Kurenov, S. N., Ionita, C., Sammons, D., & Demmy, T. L. (2015) · The Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2014.12.059 · Cited by 188
Nejati, E., Mirzadeh, H., & Zandi, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.018 · Cited by 186
3D printing: clinical applications in orthopaedics and traumatology
Auricchio, F., & Marconi, S. (2016) · EFORT Open Reviews · doi:10.1302/2058-5241.1.000012 · Cited by 185
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
Linhart, W., Peters, F., Lehmann, W., Schwarz, K., Schilling, A. F., Amling, M., Rueger, J. M., & Epple, M. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200102)54:2<162::aid-jbm2>3.0.co;2-3 · Cited by 181
Advances in Fused Deposition Modeling
Masood, S. H. (2014) · Comprehensive Materials Processing · doi:10.1016/b978-0-08-096532-1.01002-5 · Cited by 180
Biodegradable poly(ɛ-caprolactone) nanowires for bone tissue engineering applications
Porter, J. R., Henson, A., & Popat, K. C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.022 · Cited by 176
Ghosh, S. K., Nandi, S. K., Kundu, B., Datta, S., De, D. K., Roy, S. K., & Basu, D. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31009 · Cited by 170
Three‐Dimensional Printing and Its Applications in Otorhinolaryngology–Head and Neck Surgery
Crafts, T. D., Ellsperman, S. E., Wannemuehler, T. J., Bellicchi, T. D., Shipchandler, T. Z., & Mantravadi, A. V. (2017) · Otolaryngology–Head and Neck Surgery · doi:10.1177/0194599816678372 · Cited by 170
Current Application of β‐tricalcium Phosphate Composites in Orthopaedics
Liu, B., & Lun, D. (2012) · Orthopaedic Surgery · doi:10.1111/j.1757-7861.2012.00189.x · Cited by 169
Three-dimensional printing: technologies, applications, and limitations in neurosurgery
Pucci, J. U., Christophe, B. R., Sisti, J. A., & Connolly, E. S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.05.007 · Cited by 168
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163
Bolander, M. E., & Balian, G. (1986) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198668080-00018 · Cited by 162
Three-dimensional bioprinting of rat embryonic neural cells
Lee, W., Pinckney, J., Lee, V., Lee, J.-H., Fischer, K., Polio, S., Park, J.-K., & Yoo, S.-S. (2009) · NeuroReport · doi:10.1097/wnr.0b013e32832b8be4 · Cited by 162
Lee, S.-J., Nowicki, M., Harris, B., & Zhang, L. G. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0353 · Cited by 161
Lee, B. K., Yun, Y. H., Choi, J. S., Choi, Y. C., Kim, J. D., & Cho, Y. W. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.02.011 · Cited by 152
A novel porous Ti6Al4V: Characterization and cell attachment
Li, J. P., Li, S. H., van Blitterswijk, C., & de Groot, K. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30278 · Cited by 149
Saijo, H., Igawa, K., Kanno, Y., Mori, Y., Kondo, K., Shimizu, K., Suzuki, S., Chikazu, D., Iino, M., Anzai, M., et al. (2009) · Journal of Artificial Organs · doi:10.1007/s10047-009-0462-7 · Cited by 147
Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering
Arafat, M. T., Lam, C. X. F., Ekaputra, A. K., Wong, S. Y., Li, X., & Gibson, I. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.010 · Cited by 145
Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
Sun, Y., & Soh, S. (2015) · Advanced Materials · doi:10.1002/adma.201504122 · Cited by 144
Deng, M., Kumbar, S. G., Nair, L. S., Weikel, A. L., Allcock, H. R., & Laurencin, C. T. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100275 · Cited by 143
Wang, P., Tan, X., Nai, M. L. S., Tor, S. B., & Wei, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.093 · Cited by 140
Enhancing the Product Realization Process With Cloud-Based Design and Manufacturing Systems
Wu, D., Thames, J. L., Rosen, D. W., & Schaefer, D. (2013) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4025257 · Cited by 139
Stereolithographic Models for Surgical Planning in Congenital Heart Surgery
Sodian, R., Weber, S., Markert, M., Rassoulian, D., Kaczmarek, I., Lueth, T. C., Reichart, B., & Daebritz, S. H. (2007) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2006.12.004 · Cited by 137
Erol, M., Mouriño, V., Newby, P., Chatzistavrou, X., Roether, J. A., Hupa, L., & Boccaccini, A. R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.013 · Cited by 136
Xiong, Z., Yan, Y., Zhang, R., & Sun, L. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01094-6 · Cited by 133
Tan, X., Kok, Y., Tan, Y. J., Vastola, G., Pei, Q., Zhang, G., Zhang, Y., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.178 · Cited by 133
Metallic implant drug/device combinations for controlled drug release in orthopaedic applications
Lyndon, J. A., Boyd, B. J., & Birbilis, N. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.01.026 · Cited by 131
Implementing mass customization
Eastwood, M. A. (1996) · Computers in Industry · doi:10.1016/0166-3615(96)00010-3 · Cited by 129
Naghieh, S., Foroozmehr, E., Badrossamay, M., & Kharaziha, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.051 · Cited by 128
Overview of cold spray coatings applications and comparisons: a critical review
Kumar, S., Kumar, M., & Jindal, N. (2020) · World Journal of Engineering · doi:10.1108/wje-01-2019-0021 · Cited by 122
Self-citationThe effect of rhBMP-2 on canine osteoblasts seeded onto 3D bioactive polycaprolactone scaffolds
Rai, B., Teoh, S. H., Ho, K. H., Hutmacher, D. W., Cao, T., Chen, F., & Yacob, K. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.007 · Cited by 119
Generation of Multilayered 3D Structures of HepG2 Cells Using a Bio-printing Technique
Jeon, H., Kang, K., Park, S. A., Kim, W. D., Paik, S. S., Lee, S., Jeong, J., & Choi, D. (2016) · Gut and Liver · doi:10.5009/gnl16010 · Cited by 119
Noshi, T., Yoshikawa, T., Ikeuchi, M., Dohi, Y., Ohgushi, H., Horiuchi, K., Sugimura, M., Ichijima, K., & Yonemasu, K. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20001215)52:4<621::aid-jbm6>3.0.co;2-a · Cited by 117
Sadia, M., Isreb, A., Abbadi, I., Isreb, M., Aziz, D., Abouselo, A., Timmins, P., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.07.045 · Cited by 117
Cheng, Y., Chen, Y., Wang, K., & Shie, M. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01377e · Cited by 114
Riccio, M., Maraldi, T., Pisciotta, A., Sala, G. B. L., Ferrari, A., Bruzzesi, G., Motta, A., Migliaresi, C., & Pol, A. D. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0542 · Cited by 112
Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering
Loozen, L. D., Wegman, F., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21093f · Cited by 111
3D printed UV light cured polydimethylsiloxane devices for drug delivery
Holländer, J., Hakala, R. A., Suominen, J., Moritz, N., Yliruusi, J. K., & Sandler, N. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.11.016 · Cited by 111
Reaction of bone to tricalcium phosphate ceramic pellets
Cutright, D. E., Bhaskar, S. N., Brady, J. M., Getter, L., & Posey, W. R. (1972) · Oral Surgery Oral Medicine Oral Pathology · doi:10.1016/0030-4220(72)90457-4 · Cited by 108
Inkjet printing of insulin microneedles for transdermal delivery
Ross, S. A., Scoutaris, N., Lamprou, D. A., Mallinson, D. J., & Douroumis, D. (2015) · Drug Delivery and Translational Research · doi:10.1007/s13346-015-0251-1 · Cited by 105
A new MRI technique for imaging scoliosis in the sagittal plane
Schmitz, A., Jaeger, U. E., Koenig, R., Kandyba, J., Wagner, U. A., Giesecke, J., & Schmitt, O. (2001) · European Spine Journal · doi:10.1007/s005860100250 · Cited by 101
Overview of additive manufacturing process
Molitch-Hou, M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812155-9.00001-3 · Cited by 101
Three-dimensional Printing in Developing Countries
Ibrahim, A. M. S., Jose, R. R., Rabie, A. N., Gerstle, T. L., Lee, B. T., & Lin, S. J. (2015) · Plastic & Reconstructive Surgery Global Open · doi:10.1097/gox.0000000000000298 · Cited by 100
Fiber glass–bioactive glass composite for bone replacing and bone anchoring implants
VALLITTU, P. K., Närhi, T. O., & Hupa, L. (2015) · Dental Materials · doi:10.1016/j.dental.2015.01.003 · Cited by 97
3D printing of tough hydrogel composites with spatially varying materials properties
Bakarich, S. E., Gorkin, R. A., III, Gately, R. D., Naficy, S., Panhuis, M. I. H., & Spinks, G. M. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.12.003 · Cited by 96
Hybrid scaffolds based on PLGA and silk for bone tissue engineering
Sheikh, F. A., Ju, H. W., Moon, B. M., Lee, O. J., Kim, J.-H., Park, H. J., Kim, D., Kim, D., Jang, J. E., Khang, G., et al. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1989 · Cited by 95
Development of novel aligned nanofibrous composite membranes for guided bone regeneration
Kharaziha, M., Fathi, M., & Edris, H. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.03.025 · Cited by 94
3D printing of metals in rapid prototyping of biomaterials: Techniques in additive manufacturing
Sing, S. L., Tey, C. F., Tan, H. K. J., Huang, S., & Yeong, W. Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102663-2.00002-2 · Cited by 94
Study of compression properties of topologically optimized FDM made structured parts
Galantucci, L. M., Lavecchia, F., & Percoco, G. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.009 · Cited by 93
Room Ee1614, P. B. 2., van der Stok, J., Koolen, M. K. E., de Maat, M. P. M., Yavari, S. A., Alblas, J., Patka, P., Verhaar, J. A. N., van Lieshout, E., ZADPOOR, A. A., et al. (2015) · European Cells and Materials · doi:10.22203/ecm.v029a11 · Cited by 86
Mertz, L. (2013) · IEEE Pulse · doi:10.1109/mpul.2013.2279615 · Cited by 85
Ultra-porous titanium oxide scaffold with high compressive strength
Tiainen, H., Lyngstadaas, S. P., Ellingsen, J. E., & Haugen, H. J. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4142-1 · Cited by 83
费正奇, Hu, Y., Wu, D., Wu, H. D., Lü, R., Bai, J., & Song, H. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3050-5 · Cited by 82
Structural changes during 3D printing of bioderived and synthetic thermoplastic materials
Pop, M. A., Croitoru, C., Bedő, T., Geamăn, V., Radomir, I., Mihaela Cos, N., Zaharia, S. M., Chicoș, L. A., & Milos, A. I. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47382 · Cited by 82
Chen, C., Shyu, V. B., Chen, J., & Lee, M. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015004 · Cited by 79
Gu, Y., Chen, X., Lee, J. H., Monteiro, D. A., Wang, H., & Lee, W. Y. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.006 · Cited by 79
Creation of a 3D printed temporal bone model from clinical CT data
Cohen, J., & Reyes, S. A. (2015) · American Journal of Otolaryngology · doi:10.1016/j.amjoto.2015.02.012 · Cited by 78
Bahçecioğlu, G., Hasırcı, N., Bilgen, B., & Hasırcı, V. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.065 · Cited by 77
McDonald, S., Comrie, N., Buehler, E., Carter, N., Dubin, B., Gordes, K. L., McCombe-Waller, S., & Hurst, A. K. (2016) · International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS) · doi:10.1145/2982142.2982162 · Cited by 76
Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning
Huang, R., Gao, X., Wang, J., Chen, H., Tong, C., Tan, Y., & Tan, Z. (2018) · Annals of Biomedical Engineering · doi:10.1007/s10439-018-2065-z · Cited by 76
Wu, Y.-H. A., Chiu, Y., Lin, Y.-H., Ho, C., Shie, M., & Chen, Y. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20040942 · Cited by 75
Whitley, D., Eidson, R. S., Rudek, I., & Bencharit, S. (2017) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2016.10.017 · Cited by 74
Rodríguez, G., Kú-Herrera, J. D. J., & Hernández-Pérez, A. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1314-x · Cited by 74
Liu, C., Wan, P., Tan, L. L., Wang, K., & Yang, K. (2014) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2014.06.002 · Cited by 73
Surface coating reduces degradation rate of magnesium alloy developed for orthopaedic applications
Tang, J., Wang, J., Xie, X., Zhang, P., Lai, Y., Li, Y., & Qin, L. (2013) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2013.06.003 · Cited by 73
Pietrabissa, A., Marconi, S., Peri, A., Pugliese, L., Cavazzi, E., Vinci, A., Botti, M., & Auricchio, F. (2015) · Surgical Endoscopy · doi:10.1007/s00464-015-4185-y · Cited by 71
A Brief History of 3D Printing
Horvath, J. C. (2014) · Apress eBooks · doi:10.1007/978-1-4842-0025-4_1 · Cited by 70
Li, C., Yang, M., Xie, Y., Chen, K., Wang, C., Bai, Y., Zhu, X., & Li, M. (2015) · Journal of Orthopaedic Science · doi:10.1007/s00776-015-0706-8 · Cited by 70
Chen, B., & Sun, K. (2004) · Polymer Testing · doi:10.1016/j.polymertesting.2004.07.010 · Cited by 68
Additive manufacturing applications in cardiology: A review
Haleem, A., Javaid, M., & Saxena, A. (2018) · The Egyptian Heart Journal · doi:10.1016/j.ehj.2018.09.008 · Cited by 68
Fiorilli, S., Baino, F., Cauda, V., Crepaldi, M., Vitale‐Brovarone, C., Demarchi, D., & Onida, B. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5346-6 · Cited by 64
Prosecká, E., Rampichová, M., Litvinec, A., Tonar, Z., Králíčková, M., Vojtová, L., Kochová, P., Plencner, M., Buzgo, M., Míčková, A., et al. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35216 · Cited by 63
Machine Learning Enabled Powder Spreading Process Map for Metal Additive Manufacturing (AM)
Zhang, W., Mehta, A., Desai, P. S., & Higgs, C. F. (2017) · Cited by 63
Differentiation of human mesenchymal stem cells on niobium-doped fluorapatite glass-ceramics
Kushwaha, M., Pan, X. J., Holloway, J. A., & Denry, I. L. (2011) · Dental Materials · doi:10.1016/j.dental.2011.10.010 · Cited by 59
New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning
Gargiulo, P., Árnadóttir, Í., Gíslason, M. K., Edmunds, K. J., & Ólafsson, I. H. (2017) · Journal of Healthcare Engineering · doi:10.1155/2017/1439643 · Cited by 53
Golafshan, N., Gharibi, H., Kharaziha, M., & Fathi, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa68ed · Cited by 49
Polyester copolymer scaffolds enhance expression of bone markers in osteoblast‐like cells
Idris, S. B., Arvidson, K., Plikk, P., Ibrahim, S., Finne‐Wistrand, A., Albertsson, A., Bolstad, A. I., & Mustafa, K. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32726 · Cited by 48
Ji, Y., Xu, G. P., Zhang, Z. P., Xia, J. J., Yan, J. L., & Pan, S. H. (2010) · Annals of Biomedical Engineering · doi:10.1007/s10439-009-9888-6 · Cited by 45
Liu, T., Lv, B. S., Zhao, W., et al. (2020) · BioMed Research International · doi:10.1155/2020/3465465 · Cited by 43
Fassina, L., Saino, E., Visai, L., Silvani, G., Angelis, M. G. C. D., Mazzini, G., Benazzo, F. M., & Magenes, G. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31827 · Cited by 42
Saito, E., Suárez-González, D., Murphy, W. L., & Hollister, S. J. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400424 · Cited by 41
Block Allograft for Reconstruction of Alveolar Bone Ridge in Implantology
Araújo, P. P. T., de Oliveira, K. P., Montenegro, S. C. L., Carreiro, A. D. F. P., da Silva, J. S. P., & Germano, A. R. (2013) · Implant Dentistry · doi:10.1097/id.0b013e318289e311 · Cited by 38
Cited by
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Metadata
- Authors
- Kumar, R., Kumar, M., & Chohan, J. S.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 64
- Pages
- 828-850
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3132825741
- Cited by
- 367
- References
- 222
- FWCI
- 16.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.