The DOI matches its Crossref record; 177 of the 177 references it cites were found in a registry or an index.
Metal additive manufacturing in the commercial aviation industry: A review
Open accessAbstract
The applications of Additive Manufacturing (AM) have been grown up rapidly in various industries in the past few decades. Among them, aerospace has been attracted more attention due to heavy investment of the principal aviation companies for developing the AM industrial applications. However, many studies have been going on to make it more versatile and safer technology and require making development in novel materials, technologies, process design, and cost efficiency. As a matter of fact, AM has a great potential to make a revolution in the global parts manufacturing and distribution while offering less complexity, lower cost, and energy consumption, and very highly customization. The current paper aims to review the last updates on AM technologies, material issues, post-processes, and design aspects, particularly in the aviation industry. Moreover, the AM process is investigated economically including various cost models, spare part digitalization and environmental consequences. This review would be helpfully applied in both academia and industry as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Idris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Self-citationVrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
DeVierno, A., Thorn, B. K., & Carrano, A. L. (2013) · DigitalCommons - Fairfield (Fairfield University) · Cited by 1,457
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Yang, M. G. (., Hong, P., & Modi, S. B. (2011) · International Journal of Production Economics · doi:10.1016/j.ijpe.2010.10.017 · Cited by 961
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Fabrication of NiTi through additive manufacturing: A review
Elahinia, M., Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Bimber, B. A., & Hamilton, R. F. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.001 · Cited by 890
Carbon fiber reinforced plastics in aircraft construction
Soutis, C. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.08.064 · Cited by 876
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
46th AIAA Aerospace Sciences Meeting and Exhibit
(2008) · doi:10.2514/masm08 · Cited by 850
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Weller, C., Kleer, R., & Piller, F. T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.020 · Cited by 783
Additive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Ding, J., Colegrove, P., Mehnen, J., Ganguly, S., Sequeira Almeida, P. M., Wang, F., & Williams, S. (2011) · Computational Materials Science · doi:10.1016/j.commatsci.2011.06.023 · Cited by 689
Additive manufacturing in the spare parts supply chain
Khajavi, S. H., Partanen, J., & Holmström, J. (2014) · Computers in Industry · doi:10.1016/j.compind.2013.07.008 · Cited by 683
Additive layered manufacturing: sectors of industrial application shown through case studies
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco Puchades, J., & Portolés Griñan, L. (2011) · International Journal of Production Research · doi:10.1080/00207540903479786 · Cited by 676
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Industrial applications of computed tomography
De Chiffre, L., Carmignato, S., Kruth, J.-P., Schmitt, R., & Weckenmann, A. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.011 · Cited by 670
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Additive manufacturing: rapid prototyping comes of age
Campbell, I., Bourell, D., & Gibson, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231563 · Cited by 623
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 617
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
Light-weighting in aerospace component and system design
Zhu, L., Li, N., & Childs, P. R. N. (2018) · Propulsion and Power Research · doi:10.1016/j.jppr.2018.04.001 · Cited by 583
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
Ding, D., Pan, Z. S., Cuiuri, D., & Li, H. (2014) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2014.08.008 · Cited by 577
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 534
Colegrove, P. A., Coules, H., Fairman, J., et al. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.04.012 · Cited by 520
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518
Schubert, E., Klassen, M., Zerner, I., Walz, C., & Sepold, G. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00756-7 · Cited by 497
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Bridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457
Advanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
Costs and Cost Effectiveness of Additive Manufacturing
Thomas, D. S., & Gilbert, S. W. (2014) · doi:10.6028/nist.sp.1176 · Cited by 443
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Gu, J., Ding, J., Williams, S. W., Gu, H., Ma, P., & Zhai, Y. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.006 · Cited by 431
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Aerospace applications of laser additive manufacturing
Liu, R., Wang, Z., Sparks, T., Liou, F., & Newkirk, J. (2017) · Laser Additive Manufacturing · doi:10.1016/b978-0-08-100433-3.00013-0 · Cited by 426
Gu, J., Ding, J., Williams, S. W., Gu, H., Bai, J., Zhai, Y., & Ma, P. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.101 · Cited by 413
Analysis of rapid manufacturing—using layer manufacturing processes for production
Hopkinson, N., & Dicknes, P. (2003) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/095440603762554596 · Cited by 412
Szost, B. A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., & Jarvis, D. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.09.115 · Cited by 393
Self-citationA new approach to the design and optimisation of support structures in additive manufacturing
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4403-x · Cited by 389
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386
Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
Sterling, A. J., Torries, B., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.026 · Cited by 372
Leary, M., Merli, L., Torti, F., et al. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 363
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Design for Additive Manufacturing—Element transitions and aggregated structures
Adam, G. A. O., & Zimmer, D. (2014) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2013.10.001 · Cited by 348
Brandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Aboulkhair, N. T., Maskery, I., Tuck, C. J., Ashcroft, I., & Everitt, N. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.041 · Cited by 347
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes
Ruffo, M., Tuck, C., & Hague, R. (2006) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem517 · Cited by 342
Brandl, E., Schoberth, A., & Leyens, C. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.095 · Cited by 327
Anisogrid composite lattice structures for spacecraft and aircraft applications
Vasiliev, V. V., & Razin, A. F. (2006) · Composite Structures · doi:10.1016/j.compstruct.2006.06.025 · Cited by 323
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
Martina, F., Colegrove, P. A., Williams, S., et al. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3172-1 · Cited by 307
Self-citationQuality control of laser- and powder bed-based Additive Manufacturing (AM) technologies
Berumen, S., Bechmann, F., Lindner, S., Kruth, J.-P., & Craeghs, T. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.089 · Cited by 307
Disruptions, decisions, and destinations: Enter the age of 3-D printing and additive manufacturing
Kietzmann, J., Pitt, L., & Berthon, P. (2015) · Business Horizons · doi:10.1016/j.bushor.2014.11.005 · Cited by 307
Metal additive-manufacturing process and residual stress modeling
Megahed, M., Mindt, H.-W., N’Dri, N., Duan, H., & Desmaison, O. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0047-2 · Cited by 305
Fabrication of large Ti–6Al–4V structures by direct laser deposition
Qiu, C., Ravi, G. A., Dance, C., Ranson, A., Dilworth, S., & Attallah, M. M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.234 · Cited by 304
A literature review of powder-based electron beam melting focusing on numerical simulations
Galati, M., & Iuliano, L. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.001 · Cited by 300
Timmis, A. J., Hodzic, A., Koh, L., Bonner, M., Soutis, C., Schäfer, A. W., & Dray, L. (2015) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0824-0 · Cited by 278
Investigating laser rapid manufacturing for Inconel-625 components
Paul, C. P., Ganesh, P., Mishra, S. K., Bhargava, P., Negi, J., & Nath, A. K. (2007) · Optics & Laser Technology · doi:10.1016/j.optlastec.2006.01.008 · Cited by 274
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., & Hou, L. (2014) · Production Planning & Control · doi:10.1080/09537287.2013.808835 · Cited by 265
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., et al. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 259
A review on powder bed fusion technology of metal additive manufacturing
Bhavar, V., Kattire, P., Patil, V., Khot, S., Gujar, K., & Singh, R. (2017) · Additive Manufacturing Handbook · doi:10.1201/9781315119106-15 · Cited by 258
Laser polishing of 3D printed mesoscale components
Bhaduri, D., Penchev, P., Batal, A., Dimov, S., Soo, S. L., Sten, S., Harrysson, U., Zhang, Z., & Dong, H. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.211 · Cited by 257
3D printing technique applied to rapid casting
Bassoli, E., Gatto, A., Iuliano, L., & Grazia Violante, M. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710750898 · Cited by 253
ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
Asme, A. S. O. M. E. (2013) · HAL (Le Centre pour la Communication Scientifique Directe) · doi:10.1115/smasis2013 · Cited by 252
Pyka, G., Kerckhofs, G., Papantoniou, I., Speirs, M., Schrooten, J., & Wevers, M. (2013) · Materials · doi:10.3390/ma6104737 · Cited by 251
Sustainability Characterization for Additive Manufacturing
Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 250
Zhang, J., Wang, X., Paddea, S., & Zhang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.141 · Cited by 248
Koike, M., Greer, P., Owen, K., et al. (2011) · Materials · doi:10.3390/ma4101776 · Cited by 246
Research needs and recommendations on environmental implications of additive manufacturing
Rejeski, D., Zhao, F., & Huang, Y. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.019 · Cited by 233
Additive manufacturing technology in spare parts supply chain: a comparative study
Li, Y., Jia, G., Cheng, Y., & Hu, Y. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1231433 · Cited by 223
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G., & Simpson, T. W. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031156 · Cited by 220
Ben-Ner, A., & Siemsen, E. (2017) · California Management Review · doi:10.1177/0008125617695284 · Cited by 219
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Di, W., Yongqiang, Y., Xubin, S., & Yonghua, C. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3443-y · Cited by 213
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Gockel, J., Beuth, J., & Taminger, K. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.09.004 · Cited by 209
Redesign and cost estimation of rapid manufactured plastic parts
Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011065704 · Cited by 205
A new part consolidation method to embrace the design freedom of additive manufacturing
Yang, S., Tang, Y., & Zhao, Y. F. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.06.024 · Cited by 204
Laser peening: A tool for additive manufacturing post-processing
Hackel, L., Rankin, J. R., Rubenchik, A., King, W. E., & Matthews, M. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.013 · Cited by 194
Material Properties of Ti6Al4V Parts Produced by Laser Metal Deposition
Yu, J., Rombouts, M., Maes, G., & Motmans, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.056 · Cited by 193
Build orientation optimization for multi-part production in additive manufacturing
Zhang, Y., Bernard, A., Harik, R., & Karunakaran, K. P. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-015-1057-1 · Cited by 193
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Wolff, S. J., Lin, S., Faierson, E. J., Liu, W. K., Wagner, G. J., & Cao, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.027 · Cited by 185
Mahamood, R. M., & Akinlabi, E. T. (2017) · 3D Printing · doi:10.4018/978-1-5225-1677-4.ch008 · Cited by 183
Cost models of additive manufacturing: A literature review
Costabile, G., Fera, M., Fruggiero, F., Lambiase, A., & Pham, D. (2017) · International Journal of Industrial Engineering Computations · doi:10.5267/j.ijiec.2016.9.001 · Cited by 173
High specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 169
Towards a sustainable and economic selection of part candidates for additive manufacturing
Lindemann, C., Reiher, T., Jahnke, U., & Koch, R. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0179 · Cited by 168
Oettmeier, K., & Hofmann, E. (2016) · Journal of Business Economics · doi:10.1007/s11573-016-0806-8 · Cited by 165
Laser Beam Build-Up Welding: Precision in Repair, Surface Cladding, and Direct 3D Metal Deposition
Nowotny, S., Scharek, S., Beyer, E., & Richter, K.-H. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-007-9028-5 · Cited by 162
Lindermann, C., Jahnke, U., Moi, M., & Koch, R. (2012) · doi:10.26153/tsw/15341 · Cited by 160
Topological optimization of internal patterns and support in additive manufacturing
Gardan, N., & Schneider, A. (2014) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.07.003 · Cited by 158
Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening
Kalentics, N., Boillat, É., Peyre, P., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.05.008 · Cited by 157
(2017) · CRC Press eBooks · doi:10.1201/9781315196589 · Cited by 156
Online Quality Control of Selective Laser Melting
Craeghs, T., Clijsters, S., Yasa, E., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15289 · Cited by 149
Energy Inputs to Additive Manufacturing: Does Capacity Utilization Matter?
Baumers, M., Tuck, C. J., Wildman, R. D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15275 · Cited by 148
Zhang, H., Chiang, R., Qin, H., Ren, Z., Hou, X., Lin, D. L., Doll, G. L., Vasudevan, V. K., Dong, Y., & Ye, C. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.019 · Cited by 148
Westerweel, B., Basten, R., & van Houtum, G. (2018) · European Journal of Operational Research · doi:10.1016/j.ejor.2018.04.015 · Cited by 146
Fatigue behavior and cyclic deformation of additive manufactured NiTi
Bagheri, A., Mahtabi, M. J., & Shamsaei, N. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.10.006 · Cited by 145
Antonysamy, A. A. (2012) · Research Explorer (The University of Manchester) · Cited by 143
Impact of additive manufacturing on aircraft supply chain performance
Ghadge, A., Karantoni, G., Chaudhuri, A., & Srinivasan, A. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-07-2017-0143 · Cited by 139
Rodriguez, E., Mireles, J., Terrazas, C. A., Espalin, D., Perez, M. A., & Wicker, R. B. (2015) · Additive manufacturing · doi:10.1016/j.addma.2014.12.001 · Cited by 136
Chekurov, S., Metsä-Kortelainen, S., Salmi, M., Roda, I., & Jussila, A. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.09.008 · Cited by 136
Cortina, M., Arrizubieta, J. I., Ruiz, J. E., Ukar, E., & Lamíkiz, A. (2018) · Materials · doi:10.3390/ma11122583 · Cited by 135
High-Value SLM Aerospace Components: From Design to Manufacture
Brandt, M., Sun, S., Leary, M., Feih, S., Elambasseril, J., & Liu, Q. C. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.633.135 · Cited by 133
Laser Metal Deposition as Repair Technology for a Gas Turbine Burner Made of Inconel 718
Petrat, T., Graf, B., Gumenyuk, A., & Rethmeier, M. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.078 · Cited by 131
3D metal droplet printing development and advanced materials additive manufacturing
Murr, L. E., & Johnson, W. L. (2017) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2016.11.002 · Cited by 128
AM and aerospace: an ideal combination
Nickels, L. (2015) · Metal Powder Report · doi:10.1016/j.mprp.2015.06.005 · Cited by 122
Considering Part Orientation in Design for Additive Manufacturing
Leutenecker-Twelsiek, B., Klahn, C., & Meboldt, M. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.05.016 · Cited by 120
Review on Powder-Based Electron Beam Additive Manufacturing Technology
Gong, X., Anderson, T., & Chou, K. (2012) · doi:10.1115/isfa2012-7256 · Cited by 116
Dinwiddie, R. B., Dehoff, R., Lloyd, P. D., Lowe, L. E., & Ulrich, J. B. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2018412 · Cited by 112
Cai, C., Song, B., Xue, P., Wei, Q., Wu, J., Li, W., & Shi, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.280 · Cited by 107
Real-time monitoring of laser hot-wire cladding of Inconel 625
Liu, S., Liu, W., Harooni, M., et al. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.03.007 · Cited by 103
Consolidating spare parts for asset maintenance with additive manufacturing
Knofius, N., van der Heijden, M. C., & Zijm, W. H. M. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.11.007 · Cited by 103
Wits, W. W., García, J. R. R., & Becker, J. M. J. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.156 · Cited by 100
Additive manufacturing for Aerospace
Schiller, G. J. (2015) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2015.7118958 · Cited by 97
Case Study: Additive Manufacturing of Aerospace Brackets
Dehoff, R., Duty, C., Peter, W. H., et al. (2013) · AM&P Technical Articles · doi:10.31399/asm.amp.2013-03.p019 · Cited by 89
Operations, Logistics and Supply Chain Management
Laan, E., Zijm, H., Klumpp, M., Regattieri, A., & Heragu, S. (2018) · Lecture notes in logistics · doi:10.1007/978-3-319-92447-2 · Cited by 85
Stavroulakis, P. I., & Leach, R. (2016) · Review of Scientific Instruments · doi:10.1063/1.4944983 · Cited by 83
A qualification procedure to manufacture and repair aerospace parts with electron beam melting
Portolés, L., Jordá, O., Jordá, L., Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.07.002 · Cited by 82
Solubility of argon in laser additive manufactured α-titanium under hot isostatic pressing condition
Shao, S., Mahtabi, M. J., Shamsaei, N., & Thompson, S. M. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.01.040 · Cited by 80
Scharowsky, T., Juechter, V., Singer, R. F., & Körner, C. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400542 · Cited by 76
Residual Stress in SLM Ti6Al4V Alloy Specimens
Yadroitsava, I., Grewar, S., Hattingh, D. G., & Yadroitsev, I. A. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.828-829.305 · Cited by 75
Design for Additive Manufacturing: Past, Present, and Future Directions
Rosen, D. W. (2014) · Journal of Mechanical Design · doi:10.1115/1.4028073 · Cited by 74
Allen, J. H. (2006) · Cited by 68
Surface Finish Improvement of Additive Manufactured Metal Parts
Hassanin, H. S., ElShaer, A., Benhadj-Djilali, R., Modica, F. G., & Fassi, I. (2017) · Engineering materials · doi:10.1007/978-3-319-68801-5_7 · Cited by 67
Implications of Additive Manufacturing for Spare Parts Inventory
Sirichakwal, I., & Conner, B. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0035 · Cited by 65
Perraud, J.-B., Obaton, A.-F., Sleiman, J. B., Recur, B., Balacey, H., Darracq, F., Guillet, J.-P., & Mounaix, P. (2016) · Applied Optics · doi:10.1364/ao.55.003462 · Cited by 58
Tang, Y., Yang, S. L., & Zhao, Y. F. (2016) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-10-0549-7_6 · Cited by 51
Additive Manufacturing and Its Impact on the Supply Chain
Zijm, W. H. M., Knofius, N., & van der Heijden, M. (2018) · Lecture notes in logistics · doi:10.1007/978-3-319-92447-2_23 · Cited by 45
The adaptation of product cost estimation techniques to estimate the cost of service
Huang, X. X., Newnes, L., & Parry, G. (2011) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2011.596281 · Cited by 44
Manufacture and repair of aero engine components using laser technology
Kelbassa, I., Albus, P., Dietrich, J. B., & Wilkes, J. (2008) · Pacific International Conference on Laser Materials Processing, Micro, Nano and Ultrafast Fabrication (PICALO) · doi:10.2351/1.5057008 · Cited by 44
Salonitis, K., Chantzis, D., & Kappatos, V. A. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9528-x · Cited by 39
Handbook of Sustainability in Additive Manufacturing
Muthu, S. S., & Savalani, M. M. (2016) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-10-0606-7 · Cited by 34
Mehrpouya, M., Gisario, A., Rahimzadeh, A., & Barletta, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03259-9 · Cited by 33
Self-citationFrugal innovations and 3D printing: insights from the field
Marić, J., Rodhain, F., & Barlette, Y. (2016) · Journal of Innovation Economics & Management · doi:10.3917/e.jie.021.0057 · Cited by 30
Mohammed, M. I., Tatineni, J., Cadd, B., Peart, G., & Gibson, I. (2016) · Figshare · Cited by 27
The Application of Rapid Manufacturing Technologies in the Spare Parts Industry
Hasan, S., & Rennie, A. (2008) · Open Research Online (The Open University) · doi:10.26153/tsw/14985 · Cited by 26
Additive Manufacturing Laser Deposition of Ti-6Al-4V for Aerospace Repair Applications
Dey, N. K., Liou, F. W., & Nedic, C. (2013) · doi:10.26153/tsw/15641 · Cited by 25
Micro and Precision Manufacturing
(2017) · Engineering materials · doi:10.1007/978-3-319-68801-5 · Cited by 24
Laser Additive Manufactured Ti–6Al–4V Alloy: Heat Treatment Studies
Chandramohan, P., Bhero, S., Varachia, F., Obadele, B. A., & Olubambi, P. A. (2017) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-017-1190-y · Cited by 23
Huang, R., Ulu, E., Kara, L. B., & Whitefoot, K. S. (2017) · Volume 2A: 43rd Design Automation Conference · doi:10.1115/detc2017-67836 · Cited by 22
Williams, S., Martina, F., Wood, D., & Colomo, A. G. (2019) · International Journal of Rapid Manufacturing · doi:10.1504/ijrapidm.2020.10019230 · Cited by 22
Self-citationImpact of Merging Components by Additive Manufacturing in Spare Parts Management
Ashourpour, M., & Zanoni, S. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.155 · Cited by 21
Vision-based Process Monitoring for Laser Metal Deposition Processes
Karnati, S., Matta, N., Sparks, T. E., et al. (2013) · doi:10.26153/tsw/15416 · Cited by 18
Assessment of Cost and Energy Requirements of Electron Beam Melting (EBM) and Machining Processes
Priarone, P. C., Robiglio, M., Ingarao, G., & Settineri, L. (2017) · Smart innovation, systems and technologies · doi:10.1007/978-3-319-57078-5_68 · Cited by 16
Cited by
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Challenges, Opportunities and Future Directions of Smart Manufacturing: A State of Art Review
Phuyal, S., Bista, D., & Bista, R. (2020) · Sustainable Futures · doi:10.1016/j.sftr.2020.100023 · Cited by 396
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Self-citationPost-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
Metadata
- Authors
- Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 53
- Pages
- 124-149
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W2975365199
- Cited by
- 574
- References
- 177
- FWCI
- 32.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.