The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
Challenges and promises of lithium metal anode by soluble polysulfides in practical lithium–sulfur batteries
Abstract
The lithium–sulfur (Li–S) battery has raised great expectations as a next-generation high-energy-density energy storage system. The multielectron dissolution–precipitation redox conversion of S affords a great contribution to its high specific energy. Spontaneously, the highly reactive Li metal anode always confronts soluble Li polysulfides (LiPSs) in a working Li–S battery, and parasitically side reactions occur inevitably. The challenges of the Li metal anode induced by soluble LiPSs emerge as roadblocks for practical Li–S batteries with the development of the S cathode from its infancy into growth stage. Therefore, the fundamental understanding of Li anode in the electrolyte with LiPSs and the targeted protection strategies are urgently required. In this review, the challenges of the Li metal anode in the presence of LiPSs are systematically analyzed. Then, the preliminary advances in Li metal anode protection to deal with LiPSs are summarized. Finally, an insightful outlook is put forward through both a fundamental understanding and a practical exploration of the Li metal anode to promote the development of practical Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Pearson, R. G. (1963) · Journal of the American Chemical Society · doi:10.1021/ja00905a001 · Cited by 10,475
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationA highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Watanabe, M., Thomas, M. L., Zhang, S., Ueno, K., Yasuda, T., & Dokko, K. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00504 · Cited by 1,667
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Yamada, Y., Furukawa, K., Sodeyama, K., Kikuchi, K., Yaegashi, M., Tateyama, Y., & Yamada, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412807w · Cited by 1,525
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Electrochemical extraction of lithium from LiMn2O4
Thackeray, M. M., Johnson, P. J., de Picciotto, L. A., Bruce, P. G., & Goodenough, J. B. (1984) · Materials Research Bulletin · doi:10.1016/0025-5408(84)90088-6 · Cited by 947
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Self-citationYoshida, K., Nakamura, M., Kazue, Y., Tachikawa, N., Tsuzuki, S., Seki, S., Dokko, K., & Watanabe, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203983r · Cited by 828
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712702 · Cited by 774
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Lithium-Sulfur Batteries: Attaining the Critical Metrics
Bhargav, A., He, J., Gupta, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.01.001 · Cited by 736
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Self-citationFluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Self-citationCurrent Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Self-citationPang, Q., Shyamsunder, A., Narayanan, B., Kwok, C. Y., Curtiss, L. A., & Nazar, L. F. (2018) · Nature Energy · doi:10.1038/s41560-018-0214-0 · Cited by 573
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Self-citationSolvate Ionic Liquid Electrolyte for Li–S Batteries
Dokko, K., Tachikawa, N., Yamauchi, K., Tsuchiya, M., Yamazaki, A., Takashima, E., Park, J.-W., Ueno, K., Seki, S., Serizawa, N., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.111308jes · Cited by 507
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Challenges and Key Parameters of Lithium-Sulfur Batteries on Pouch Cell Level
Dörfler, S., Althues, H., Härtel, P., Abendroth, T., Schumm, B., & Kaskel, S. (2020) · Joule · doi:10.1016/j.joule.2020.02.006 · Cited by 438
Jurng, S., Brown, Z. L., Kim, J., & Lucht, B. L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00364e · Cited by 417
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Solvent-Dictated Lithium Sulfur Redox Reactions: An Operando UV–vis Spectroscopic Study
Zou, Q., & Lu, Y.-C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00228 · Cited by 411
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Self-citationUnique behaviour of nonsolvents for polysulphides in lithium–sulphur batteries
Cuisinier, M., Cabelguen, P.-E., Adams, B. D., Garsuch, A., Balasubramanian, M., & Nazar, L. F. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00372a · Cited by 393
Li CoO2 (0<x⩽1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90077-1 · Cited by 391
The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium
He, M., Guo, R., Hobold, G. M., Gao, H., & Gallant, B. M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1911017116 · Cited by 372
Electrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
Radical or Not Radical: Revisiting Lithium–Sulfur Electrochemistry in Nonaqueous Electrolytes
Cuisinier, M., Hart, C. J., Balasubramanian, M., Garsuch, A., & Nazar, L. F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401801 · Cited by 347
High-Power Li-Metal Anode Enabled by Metal-Organic Framework Modified Electrolyte
Bai, S., Sun, Y., Yi, J., He, Y., Qiao, Y., & Zhou, H. (2018) · Joule · doi:10.1016/j.joule.2018.07.010 · Cited by 347
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Self-citationImproved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
High‐Fluorinated Electrolytes for Li–S Batteries
Zheng, J., Ji, G., Fan, X., Chen, J., Li, Q., Wang, H., Yang, Y., DeMella, K. C., Raghavan, S. R., & Wang, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803774 · Cited by 331
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte
Wang, J. L., Yang, J., Xie, J. Y., Xu, N. X., & Li, Y. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00358-2 · Cited by 315
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
Li, G., Gao, Y., He, X., Huang, Q., Chen, S., Kim, S. H., & Wang, D. (2017) · Nature Communications · doi:10.1038/s41467-017-00974-x · Cited by 314
Steudel, R., & Chivers, T. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00826d · Cited by 304
Highly Solvating Electrolytes for Lithium–Sulfur Batteries
Gupta, A., Bhargav, A., & Manthiram, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201803096 · Cited by 303
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Self-citationLi, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Lithium-Sulfur Batteries for Commercial Applications
Li, G., Chen, Z., & Lu, J. (2018) · Chem · doi:10.1016/j.chempr.2017.12.012 · Cited by 261
Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201806532 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationPlating/Stripping Behavior of Actual Lithium Metal Anode
Liu, H., Cheng, X., Xu, R., Zhang, X., Yan, C., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902254 · Cited by 260
Self-citationSulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Self-citationCircumventing huge volume strain in alloy anodes of lithium batteries
Li, H., Yamaguchi, T., Matsumoto, S., Hoshikawa, H., Kumagai, T., Okamoto, N. L., & Ichitsubo, T. (2020) · Nature Communications · doi:10.1038/s41467-020-15452-0 · Cited by 256
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Self-citationLi/S fundamental chemistry and application to high-performance rechargeable batteries
AKRIDGE, J. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.07.070 · Cited by 251
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
Polysulfide dissolution control: the common ion effect
Shin, E. S., Kim, K., Oh, S. H., & Cho, W. I. (2013) · Chem. Commun. · doi:10.1039/c2cc36986a · Cited by 247
Sparingly Solvating Electrolytes for High Energy Density Lithium–Sulfur Batteries
Cheng, L., Curtiss, L. A., Zavadil, K. R., Gewirth, A. A., Shao, Y., & Gallagher, K. G. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00194 · Cited by 246
Molecular structure and stability of dissolved lithium polysulfide species
Vijayakumar, M., Govind, N., Walter, E., Burton, S. D., Shukla, A., Devaraj, A., Xiao, J., Liu, J., Wang, C., Karim, A., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00889h · Cited by 245
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
A compact inorganic layer for robust anode protection in lithium‐sulfur batteries
Yao, Y., Zhang, X., Li, B., Yan, C., Chen, P., Huang, J., & Zhang, Q. (2020) · InfoMat · doi:10.1002/inf2.12046 · Cited by 244
Self-citationZhang, G., Peng, H., Zhao, C., Chen, X., Zhao, L., Li, P., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810132 · Cited by 243
Self-citationWeng, W., Pol, V. G., & Amine, K. (2013) · Advanced Materials · doi:10.1002/adma.201204051 · Cited by 241
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
Kong, L., Li, B., Peng, H., Zhang, R., Xie, J., Huang, J., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800849 · Cited by 240
Self-citationA Mixed Lithium‐Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode
Liu, F., Wang, L., Zhang, Z., Shi, P., Feng, Y., Yao, Y., Ye, S., Wang, H., Wu, X., & Yu, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001607 · Cited by 240
Gutmann Donor and Acceptor Numbers for Ionic Liquids
Schmeisser, M., Illner, P., Puchta, R., Zahl, A., & van Eldik, R. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201200584 · Cited by 225
Nakanishi, A., Ueno, K., Watanabe, D., Ugata, Y., Matsumae, Y., Liu, J., Thomas, M. L., Dokko, K., & Watanabe, M. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b02625 · Cited by 224
In Situ Chemical Imaging of Solid-Electrolyte Interphase Layer Evolution in Li–S Batteries
Nandasiri, M. I., Camacho-Forero, L. E., Schwarz, A. M., Shutthanandan, V., Thevuthasan, S., Balbuena, P. B., Mueller, K. T., & Murugesan, V. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00374 · Cited by 218
Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
Self-citationPark, J.-W., Yamauchi, K., Takashima, E., Tachikawa, N., Ueno, K., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp400153m · Cited by 213
Lee, C.-W., Pang, Q., Ha, S., Cheng, L., Han, S.-D., Zavadil, K. R., Gallagher, K. G., Nazar, L. F., & Balasubramanian, M. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00123 · Cited by 212
Rong, G., Zhang, X., Zhao, W. J., Qiu, Y., Liu, M., Ye, F., Xu, Y., Chen, J., Hou, Y., Li, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606187 · Cited by 203
Self-citationSalts dissolved in salts: ionic liquid mixtures
Lui, M. Y., Crowhurst, L., Hallett, J. P., Hunt, P. A., Niedermeyer, H., & Welton, T. (2011) · Chemical Science · doi:10.1039/c1sc00227a · Cited by 197
Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries
Xu, R., Belharouak, I., Li, J. C. M., Zhang, X., Bloom, I., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200990 · Cited by 184
Self-citationLiang, J., Li, X., Zhao, Y., Goncharova, L. V., Wang, G., Adair, K. R., Wang, C., Li, R., Zhu, Y., Qian, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804684 · Cited by 181
Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium–Sulfur Batteries
Li, G., Huang, Q., He, X., Gao, Y., Wang, D., Kim, S. H., & Wang, D. (2018) · ACS Nano · doi:10.1021/acsnano.7b08035 · Cited by 178
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Zheng, J., Fan, X., Ji, G., Wang, H., Hou, S., DeMella, K. C., Raghavan, S. R., Wang, J., Xu, K., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.065 · Cited by 177
Gordin, M. L., Dai, F., Chen, S., Xu, T., Song, J., Tang, D., Azimi, N., Zhang, Z., & Wang, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501665s · Cited by 176
Rajput, N. N., Murugesan, V., Shin, Y., Han, K. S., Lau, K. C., Chen, J., Liu, J., Curtiss, L. A., Mueller, K. T., & Persson, K. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00068 · Cited by 173
Alloy Anodes for Rechargeable Alkali-Metal Batteries: Progress and Challenge
Liu, H., Cheng, X.-B., Huang, J.-Q., Kaskel, S., Chou, S., Park, H. S., & Zhang, Q. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00118 · Cited by 171
Self-citationImproved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Self-citationReactivity at the Lithium–Metal Anode Surface of Lithium–Sulfur Batteries
Camacho-Forero, L. E., Smith, T. W., Bertolini, S., & Balbuena, P. B. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b08254 · Cited by 166
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Boosting High-Performance in Lithium–Sulfur Batteries via Dilute Electrolyte
Wu, F., Chu, F., Ferrero, G. A., Sevilla, M., Fuertes, A. B., Borodin, O. A., Yu, Y. M., & Yushin, G. N. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c01778 · Cited by 155
Jia, W., Fan, C., Wang, L., Wang, Q., Zhao, M., Zhou, A., & Li, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03897 · Cited by 150
Effect of the Anion Activity on the Stability of Li Metal Anodes in Lithium‐Sulfur Batteries
Cao, R., Chen, J., Han, K. S., Xu, W., Mei, D., Bhattacharya, P., Engelhard, M., Mueller, K. T., Liu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505074 · Cited by 149
Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries
Barchasz, C., Leprêtre, J., Patoux, S., et al. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.11.001 · Cited by 143
Understanding the Effect of a Fluorinated Ether on the Performance of Lithium–Sulfur Batteries
Azimi, N., Xue, Z., Bloom, I., Gordin, M. L., Wang, D., Daniel, T. B., Takoudis, C. G., & Zhang, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01412 · Cited by 135
The electrochemical behavior of polysulfides in tetrahydrofuran
Yamin, H., Penciner, J., Gorenshtain, A., Elam, M., & Peled, E. (1985) · Journal of Power Sources · doi:10.1016/0378-7753(85)88022-8 · Cited by 133
Interface Design and Development of Coating Materials in Lithium–Sulfur Batteries
Li, X., & Sun, X. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801323 · Cited by 132
Xiong, S., Xie, K., Blomberg, E., Jacobsson, P., & Matic, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.119 · Cited by 127
Kim, M. S., Deepika, Lee, S. H., Kim, M.-S., Ryu, J.-H., Lee, K., Archer, L. A., & Cho, W. I. (2019) · Science Advances · doi:10.1126/sciadv.aax5587 · Cited by 124
New insight into liquid electrolyte of rechargeable lithium/sulfur battery
Zhang, S. S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.122 · Cited by 123
Intrinsic Shuttle Suppression in Lithium-Sulfur Batteries for Pouch Cell Application
Weller, C., Thieme, S., Härtel, P., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0981714jes · Cited by 122
New Insights into Mossy Li Induced Anode Degradation and Its Formation Mechanism in Li–S Batteries
Zhang, Y., Heim, F. M., Song, N., Bartlett, J. L., & Li, X. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00886 · Cited by 121
Su, C., He, M., Amine, R., Chen, Z., & Amine, K. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807367 · Cited by 115
Stabilized lithium metal anode by an efficient coating for high-performance Li–S batteries
Xia, S., Zhang, X., Liang, C., Yu, Y., & Liu, W. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.07.042 · Cited by 112
Self-citationShin, J. H., & Cairns, E. J. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2869876 · Cited by 106
Cation-Directed Selective Polysulfide Stabilization in Alkali Metal–Sulfur Batteries
Zou, Q., Liang, Z., Du, G.-Y., Liu, C., Li, E. Y., & Lu, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04536 · Cited by 98
Azimi, N., Xue, Z., Rago, N. L. D., Takoudis, C. G., Gordin, M. L., Song, J., Wang, D., & Zhang, Z. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0431501jes · Cited by 96
Li2S Film Formation on Lithium Anode Surface of Li–S batteries
Liu, Z., Bertolini, S., Balbuena, P. B., & Mukherjee, P. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11803 · Cited by 93
New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling
Xiao, Y., Han, B., Zeng, Y., Chi, S., Zeng, X., Zheng, Z., Xu, K., & Deng, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903937 · Cited by 92
Gupta, A., Bhargav, A., Jones, J.-P., Bugga, R., & Manthiram, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b05164 · Cited by 89
Chen, Y., Zhang, H., Xu, W., Yang, X., Yu, Y., Li, X., & Zhang, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704987 · Cited by 88
Shin, M., Wu, H., Narayanan, B., See, K. A., Assary, R. S., Zhu, L., Haasch, R. T., Zhang, S., Zhang, Z., Curtiss, L. A., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11566 · Cited by 82
Andersen, A., Rajput, N. N., Han, K. S., Pan, H., Govind, N., Persson, K. A., Mueller, K. T., & Murugesan, V. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03944 · Cited by 81
Yanagi, M., Ueno, K., Ando, A., Li, S., Matsumae, Y., Liu, J., Dokko, K., & Watanabe, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7a81 · Cited by 80
Tang, B., Wu, H., Du, X., Cheng, X., Liu, X., Yu, Z., Yang, J., Zhang, M., Zhang, J., & Cui, G. (2020) · Small · doi:10.1002/smll.201905737 · Cited by 77
Shen, C., Ge, M., Zhang, A., Fang, X., Liu, Y., Rong, J., & Zhou, C. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.013 · Cited by 76
Electrolyte with Low Polysulfide Solubility for Li–S Batteries
Sun, K., Wu, Q., Tong, X., & Gan, H. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00317 · Cited by 64
Asymmetric behaviour of Li/Li symmetric cells for Li metal batteries
Koo, D., Kwon, B., Lee, J., & Lee, K. T. (2019) · Chemical Communications · doi:10.1039/c9cc04082j · Cited by 59
Su, C., He, M., Amine, R., & Amine, K. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201904240 · Cited by 58
Sun, C., Huang, X., Jin, J. H., Lu, Y., Wang, Q., Yang, J., & Wen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.063 · Cited by 55
Kim, J., Yoo, D., Min, J., Shakoor, R. A., Kahraman, R., & Choi, J. W. (2015) · ChemNanoMat · doi:10.1002/cnma.201500055 · Cited by 54
Gao, M., Su, C., He, M., Glossmann, T., Hintennach, A., Feng, Z., Huang, Y., & Zhang, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01057e · Cited by 50
A Li-Li2S4 battery with improved discharge capacity and cycle life at low electrolyte/sulfur ratios
Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.029 · Cited by 30
Cited by
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Metadata
- Authors
- Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 45
- Pages
- 62-76
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3154141802
- Cited by
- 283
- References
- 146
- FWCI
- 14.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.