The DOI matches its Crossref record; 167 of the 167 references it cites were found in a registry or an index.
Polymeric composites for powder-based additive manufacturing: Materials and applications
Open accessAbstract
As one of the most important categories in the additive manufacturing (AM) field, powder-based techniques, such as selective laser sintering, electron beam melting and selective laser melting, utilize laser or electronic beams to selectively fuse polymeric, metallic, ceramic or composite powders layer-by-layer into desired products according to their computer-aided design models. With unique mechanical, thermal, electrical, biocompatible and fire-retardant properties, polymeric composite materials for powder-based AM have been attracting intensive research interests because of their potential for a wide variety of functional applications in aerospace, automobile, marine and offshore, medical and many other industries. This article provides a comprehensive review of the recent progress on polymeric composite materials, their powder preparation for AM, and functionalities and applications of their printed products. It begins with the introduction of thermoplastic polymers that have been used as the main matrices of the polymeric composites and various composite reinforcements such as metallic, ceramic, carbon-based fillers and polymer blends for strengthening and functionality purposes. Discussion is then made on the processes for manufacturing such polymeric composites into powder form, which include shear pulverization, solution-based methods and melt compounding methods, with a focus on their advantages, limitations and challenges in terms of their productivity and processibility as well as powder printability. Thereafter, the properties and functionalities of the printed products and their various intriguing applications particularly in biomedical (anatomical models, tissue engineering and drug delivery), aerospace, automobile, military, energy and environmental, acoustic devices and sports equipment are highlighted. Finally, this review is concluded with an outlook on polymeric composites for powder-based AM, new opportunities, major challenges and possible solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 198
RetractedPolymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Fouling in membrane bioreactors used in wastewater treatment
Le-Clech, P., Chen, V., & Fane, T. A. G. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.08.019 · Cited by 2,291
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Self-citationHussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765 · cited 1×
“, polyvinyl alcohol (PVA), poly- ε -caprolactone (PCL), poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), polylactide (PLA), polyglycolide (PGA), and their co-polymers [69,70].”
Pharmaceutical Particle Engineering via Spray Drying
Vehring, R. (2008) · Pharmaceutical Research · doi:10.1007/s11095-007-9475-1 · Cited by 1,691
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
A review on membrane fabrication: Structure, properties and performance relationship
Lalia, B. S., Kochkodan, V., Hashaikeh, R., & Hilal, N. (2013) · Desalination · doi:10.1016/j.desal.2013.06.016 · Cited by 1,109
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Self-citationMultiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Nanofiber technology: current status and emerging developments
Kenry, & Lim, C. T. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.002 · Cited by 860
Two‐Dimensional‐Material Membranes: A New Family of High‐Performance Separation Membranes
Liu, G., Jin, W., & Xu, N. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600438 · Cited by 841
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Synthetic polymer scaffolds for tissue engineering
Place, E. S., George, J. H., Williams, C. K., & Stevens, M. M. (2009) · Chemical Society Reviews · doi:10.1039/b811392k · Cited by 815
Conductive polymer composites with segregated structures
Pang, H., Xu, L., Yan, D.-X., & Li, Z.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.07.007 · Cited by 802
Giga-voxel computational morphogenesis for structural design
Aage, N., Andreassen, E., Lazarov, B. S., & Sigmund, O. (2017) · Nature · doi:10.1038/nature23911 · Cited by 772
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Self-citationTaboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Sun, P., Wang, K., & Zhu, H. (2016) · Advanced Materials · doi:10.1002/adma.201502595 · Cited by 668
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
High thermal conductivity in amorphous polymer blends by engineered interchain interactions
Kim, G.-H., Lee, D., Shanker, A., Shao, L., Kwon, M. S., Gidley, D., Kim, J., & Pipe, K. P. (2015) · Nature Materials · doi:10.1038/nmat4141 · Cited by 593
Formation of polymer particles with supercritical fluids: A review
Yeo, S.-D., & Kiran, E. (2005) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2004.10.006 · Cited by 571
Eshraghi, S., & Das, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.002 · Cited by 524
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Experimental Acoustic Ground Cloak in Air
Popa, B.-I., Zigoneanu, L., & Cummer, S. A. (2011) · Physical Review Letters · doi:10.1103/physrevlett.106.253901 · Cited by 449
Differential scanning calorimetry (DSC) of semicrystalline polymers
Schick, C. (2009) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-009-3169-y · Cited by 440
High thermal conductivity of chain-oriented amorphous polythiophene
Singh, V., Bougher, T. L., Weathers, A., Cai, Y., Bi, K., Pettes, M. T., McMenamin, S. A., Lv, W., Resler, D. P., Gattuso, T. R., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.44 · Cited by 430
Experiments on Elastic Cloaking in Thin Plates
Stenger, N., Wilhelm, M., & Wegener, M. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.014301 · Cited by 425
Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays
Wood, V., Panzer, M. J., Chen, J., Bradley, M. S., Halpert, J. E., Bawendi, M. G., & Bulović, V. (2009) · Advanced Materials · doi:10.1002/adma.200803256 · Cited by 422
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Self-citationWiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Self-citationFielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
Thermal conductivity and interfacial resistance in single-wall carbon nanotube epoxy composites
Bryning, M. B., Milkie, D. E., Islam, M. F., Kikkawa, J. M., & Yodh, A. G. (2005) · Applied Physics Letters · doi:10.1063/1.2103398 · Cited by 398
Sintering of calcium phosphate bioceramics
Champion, E. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.11.029 · Cited by 373
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Self-citationWeyl points and Fermi arcs in a chiral phononic crystal
Li, F., Huang, X., Lu, J., Ma, J., & Liu, Z. (2018) · Nature Physics · doi:10.1038/nphys4275 · Cited by 340
Laser-assisted direct ink writing of planar and 3D metal architectures
Skylar-Scott, M. A., Gunasekaran, S., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1525131113 · Cited by 318
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Wakabayashi, K., Pierre, C., Dikin, D. A., Ruoff, R. S., Ramanathan, T., Brinson, L. C., & Torkelson, J. M. (2008) · Macromolecules · doi:10.1021/ma071687b · Cited by 297
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Self-citation3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
Ibrahim, D., Broilo, T. L., Heitz, C., de Oliveira, M. G., de Oliveira, H. W., Nobre, S. M. W., dos Santos Filho, J. H. G., & Silva, D. N. (2009) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.10.008 · Cited by 285
Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0108252 · Cited by 284
Hydrogen bonding, mobility, and structural transitions in aliphatic polyamides
Murthy, N. S. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20833 · Cited by 271
Investigation of Multimodal Electret-Based MEMS Energy Harvester With Impact-Induced Nonlinearity
Tao, K., Tang, L., Wu, J., Lye, S. W., Chang, H., & Miao, J. (2018) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2018.2792686 · Cited by 262
Chua, C. K., Leong, K. F., Tan, K. H., Wiria, F. E., & Cheah, C. M. (2004) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000046393.81449.a5 · Cited by 259
Self-citationDegradation characteristics of α and β tri‐calcium‐phosphate (TCP) in minipigs
Wiltfang, J., Merten, H. A., Schlegel, K. A., Schultze‐Mosgau, S., Kloss, F. R., Rupprecht, S., & Kessler, P. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10084 · Cited by 255
Yan, W., Lin, S., Kafka, O. L., Lian, Y., Yu, C., Liu, Z., Yan, J., Wolff, S., Wu, H., Ndip-Agbor, E., et al. (2018) · Computational Mechanics · doi:10.1007/s00466-018-1539-z · Cited by 252
Zhou, W. Y., Lee, S. H., Wang, M., Cheung, W. L., & Ip, W. Y. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3089-3 · Cited by 247
Silva, D. N., Gerhardt de Oliveira, M., Meurer, E., Meurer, M. I., Lopes da Silva, J. V., & Santa-Bárbara, A. (2008) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.04.003 · Cited by 246
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
Self-citationChung, H., & Das, S. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.112 · Cited by 245
Cheah, C. M., Chua, C. K., Leong, K. F., & Chua, S. W. (2003) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700300034 · Cited by 243
Self-citationXiao, Y.-J., Wang, W.-Y., Lin, T., Chen, X.-J., Zhang, Y.-T., Yang, J.-H., Wang, Y., & Zhou, Z.-W. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12651 · Cited by 242
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Economic evaluation of stand-alone solar powered membrane distillation systems
Saffarini, R. B., Summers, E. K., Arafat, H. A., & Lienhard, J. H. (2012) · Desalination · doi:10.1016/j.desal.2012.05.017 · Cited by 223
The Use of Carbon-Fiber-Reinforced (CFR) PEEK Material in Orthopedic Implants: A Systematic Review
Li, C. S., Vannabouathong, C., Sprague, S., & Bhandari, M. (2015) · Clinical Medicine Insights: Arthritis and Musculoskeletal Disorders · doi:10.4137/cmamd.s20354 · Cited by 223
Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., & Loh, Y. T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.024 · Cited by 220
Self-citation3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
Klammert, U., Gbureck, U., Vorndran, E., Rödiger, J., Meyer-Marcotty, P., & Kübler, A. C. (2010) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2010.01.009 · Cited by 213
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Khang, D., Choi, J., Im, Y.-M., Kim, Y.-J., Jang, J.-H., Kang, S. S., Nam, T.-H., Song, J., & Park, J.-W. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.05.005 · Cited by 208
Characterization of polyamide powders for determination of laser sintering processability
Verbelen, L., Dadbakhsh, S., Van den Eynde, M., Kruth, J.-P., Goderis, B., & Van Puyvelde, P. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.12.014 · Cited by 208
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Self-citationNovel spacers for mass transfer enhancement in membrane separations
Li, F., Meindersma, W., de Haan, A. B., & Reith, T. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.12.019 · Cited by 204
Wu, C., Fan, W., Zhou, Y., Luo, Y., Gelinsky, M., Chang, J., & Xiao, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30566f · Cited by 202
Gorna, K., & Gogolewski, S. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10148 · Cited by 202
Kikuchi, M., Koyama, Y., Yamada, T., Imamura, Y., Okada, T., Shirahama, N., Akita, K., Takakuda, K., & Tanaka, J. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.001 · Cited by 195
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
Self-citationSelective laser sintering of ultra high molecular weight polyethylene for clinical applications
Rimell, J. T., & Marquis, P. M. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(2000)53:4<414::aid-jbm16>3.0.co;2-m · Cited by 186
Tetracalcium phosphate: Synthesis, properties and biomedical applications
Moseke, C., & Gbureck, U. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.04.020 · Cited by 182
Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
Self-citation3D printed drug delivery devices: perspectives and technical challenges
Palo, M., Holländer, J., Suominen, J., Yliruusi, J., & Sandler, N. (2017) · Expert Review of Medical Devices · doi:10.1080/17434440.2017.1363647 · Cited by 181
Acoustic Holographic Rendering with Two-dimensional Metamaterial-based Passive Phased Array
Xie, Y., Shen, C., Wang, W., Li, J., Suo, D., Popa, B.-I., Jing, Y., & Cummer, S. A. (2016) · Scientific Reports · doi:10.1038/srep35437 · Cited by 181
Baumers, M., Tuck, C., Bourell, D. L., Sreenivasan, R., & Hague, R. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411406044 · Cited by 180
Model of the selective laser sintering of bisphenol-A polycarbonate
Nelson, J. C., Xue, S., Barlow, J. W., Beaman, J. J., Marcus, H. L., & Bourell, D. L. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00022a014 · Cited by 177
Design and additive manufacture for flow chemistry
Capel, A. J., Edmondson, S., Christie, S. D. R., Goodridge, R. D., Bibb, R. J., & Thurstans, M. (2013) · Lab on a Chip · doi:10.1039/c3lc50844g · Cited by 176
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Peyre, P., Rouchausse, Y., Defauchy, D., & Régnier, G. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.04.030 · Cited by 172
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
Effects of energy density on morphology and properties of selective laser sintered polycarbonate
Ho, H. C. H., Gibson, I., & Cheung, W. L. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00007-2 · Cited by 167
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Yan, M., Tian, X., Peng, G., Li, D., & Zhang, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.06.023 · Cited by 155
Tang, H., Chiu, M.-L., & Yen, H.-C. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.02.020 · Cited by 153
Fabrication of customised scaffolds using computer‐aided design and rapid prototyping techniques
Naing, M. W., Chua, C. K., Leong, K. F., & Wang, Y. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612938 · Cited by 152
Self-citationBinder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Azhari, A., Marzbanrad, E., Yilman, D., Toyserkani, E., & Pope, M. A. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.028 · Cited by 146
Activity Monitoring and Energy Expenditure in COPD Patients: A Validation Study
Patel, S. A., Benzo, R. P., Slivka, W. A., & Sciurba, F. C. (2007) · COPD: Journal of Chronic Obstructive Pulmonary Disease · doi:10.1080/15412550701246658 · Cited by 144
Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)
Berretta, S., Evans, K., & Ghita, O. R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.003 · Cited by 136
Zhu, W., Yan, C., Shi, Y., Wen, S., Liu, J., & Shi, Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.043 · Cited by 130
Gurreri, L., Tamburini, A., Cipollina, A., et al. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.09.006 · Cited by 130
Additive Manufacturing in Aerospace; Examples and Research Outlook
Lyons, B. (2014) · The Bridge · Cited by 129
Yuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Self-citationShuai, C., Mao, Z., Lu, H., et al. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015014 · Cited by 116
Lohfeld, S., Cahill, S., Barron, V., McHugh, P. E., Dürselen, L., Kreja, L., Bausewein, C., & Ignatius, A. A. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.05.018 · Cited by 116
Beal, V. E., Paggi, R. A., Salmoria, G. V., & Lago, A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30329 · Cited by 115
Rehabilitation needs for older adults with stroke living at home: perceptions of four populations
other members of the BRAD group, Vincent, C., Deaudelin, I., Robichaud, L., Rousseau, J., Viscogliosi, C., Talbot, L. R., & Desrosiers, J. (2007) · BMC Geriatrics · doi:10.1186/1471-2318-7-20 · Cited by 110
Selective Laser Sintering of SiC/Polyamide Composites
Hon, K. K. B., & Gill, T. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60558-7 · Cited by 110
Bai, J., Goodridge, R., Hague, R., et al. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.012 · Cited by 106
Bai, J., Goodridge, R., Hague, R., & Song, M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23459 · Cited by 105
Li, Z., Wang, Z., Gan, X., Fu, D., Fei, G., & Xia, H. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700211 · Cited by 104
(2017) · Springer eBooks · doi:10.1007/978-3-319-66866-6 · Cited by 104
Experimental analysis of selective laser sintering of polyamide powders: an energy perspective
Franco, A., Lanzetta, M., & Romoli, L. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.07.018 · Cited by 101
Schmidt, J., Sachs, M., Blümel, C., Winzer, B., Toni, F., Wirth, K., & Peukert, W. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.003 · Cited by 100
Zhu, W., Yan, C., Shi, Y., et al. (2016) · Scientific Reports · doi:10.1038/srep33780 · Cited by 97
A Percolation Model of Thermal Conductivity for Filled Polymer Composites
Zhang, G., Xia, Y., Wang, H., Tao, Y., Tao, G., Tu, S., & Wu, H. (2009) · Journal of Composite Materials · doi:10.1177/0021998309349690 · Cited by 95
Shen, F., Yuan, S., Guo, Y., Zhao, B. Y., Bai, J., Qwamizadeh, M., Chua, C. K., Wei, J., & Zhou, K. (2016) · International Journal of Applied Mechanics · doi:10.1142/s1758825116400068 · Cited by 94
Self-citationThermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering
Bai, J., Goodridge, R., Yuan, S., et al. (2015) · Molecules · doi:10.3390/molecules201019041 · Cited by 93
Self-citationTao, Y., Kim, J., & Torkelson, J. M. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.041 · Cited by 91
A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
Chunze, Y., Yusheng, S., Jinsong, Y., et al. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684408094062 · Cited by 91
Carbon-nanotube–polymer nanofibers with high thermal conductivity
Datsyuk, V., Trotsenko, S., & Reich, S. (2012) · Carbon · doi:10.1016/j.carbon.2012.09.045 · Cited by 88
Studies on the reprocessability of poly(ether ether ketone) (PEEK)
McLauchlin, A. R., Ghita, O., & Savage, L. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.07.010 · Cited by 88
Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties
Berretta, S., Evans, K. E., & Ghita, O. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.097 · Cited by 87
Tan, W. S., Suwarno, S. R., An, J., Chua, C. K., Fane, A. G., & Chong, T. H. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.05.037 · Cited by 87
Self-citationScaffold Library for Tissue Engineering: A Geometric Evaluation
Chantarapanich, N., Puttawibul, P., Sucharitpwatskul, S., Jeamwatthanachai, P., Inglam, S., & Sitthiseripratip, K. (2012) · Computational and Mathematical Methods in Medicine · doi:10.1155/2012/407805 · Cited by 85
Bioactive ceramic-reinforced composites for bone augmentation
Tanner, K. E. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0229.focus · Cited by 79
Salmoria, G. V., Leite, J. L., Ahrens, C. H., Lago, A., & Pires, A. T. N. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.12.002 · Cited by 79
Effects of graphite powder on the laser sintering behaviour of polycarbonate
Ho, H. C. H., Cheung, W. L., & Gibson, I. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441148 · Cited by 78
Song, Y., & Koenig, W. (1997) · CIRP Annals · doi:10.1016/s0007-8506(07)60790-2 · Cited by 74
Salmoria, G. V., Klauss, P., Zepon, Κ. M., & Κanis, L. A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4393-8 · Cited by 67
Rosa, C. D., Auriemma, F., Girolamo, R. D., de Ballesteros, O. R., Pepe, M., Tarallo, O., & Malafronte, A. (2013) · Macromolecules · doi:10.1021/ma400570k · Cited by 66
Analysis of the material properties involved in laser sintering of thermoplastic polyurethane
Verbelen, L., Dadbakhsh, S., den Eynde, M. V., Strobbe, D., Kruth, J., Goderis, B., & Puyvelde, P. V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.001 · Cited by 66
Sustainability Study in Selective Laser Sintering – An Energy Perspective
Sreenivasan, R., & Bourell, D. L. (2009) · doi:10.26153/tsw/15104 · Cited by 64
Use of Rapid Prototyping in the Care of Patients with Structural Heart Disease
Kim, M. S., Hansgen, A. R., & Carroll, J. D. (2008) · Trends in Cardiovascular Medicine · doi:10.1016/j.tcm.2008.11.001 · Cited by 62
Reisenauer, C., Kirschniak, A., Drews, U., & Wallwiener, D. R. (2006) · European Journal of Obstetrics & Gynecology and Reproductive Biology · doi:10.1016/j.ejogrb.2006.03.020 · Cited by 61
Wang, Y., Rouholamin, D., Davies, R., & Ghita, O. R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.094 · Cited by 59
Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process
Kim, H. C., Hahn, H. T., & Yang, Y. S. (2012) · Journal of Composite Materials · doi:10.1177/0021998312441812 · Cited by 58
Parvaiz, M. R., Mohanty, S., NAYAK, S. K., & Mahanwar, P. A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.026 · Cited by 58
Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane
Yuan, S., Bai, J., Chua, C. K., Zhou, K., & Wei, J. (2016) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4034032 · Cited by 56
Self-citationExperimental investigation into the selective laser sintering of high‐impact polystyrene
Shi, Y., Wang, Y., Chen, J., & Huang, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27686 · Cited by 55
New Polymer Materials for the Laser Sintering Process: Polypropylene and Others
Wegner, A. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.105 · Cited by 53
Doyle, H., Lohfeld, S., & McHugh, P. E. (2013) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0913-4 · Cited by 47
Lebovitz, A. H., Khait, K., & Torkelson, J. M. (2002) · Polymer · doi:10.1016/s0032-3861(02)00717-6 · Cited by 44
Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement
Shi, Y., Chen, J., Wang, Y., Li, Z., & Huang, S. (2007) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1243/14644207jmda65 · Cited by 44
Hierarchically porous materials prepared by selective laser sintering
Yan, M., Tian, X., Peng, G., Cao, Y. Q., & Li, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.015 · Cited by 41
Thermal conductivity of polyamide 12 powder for use in laser sintering
Yuan, M., Diller, T. T., Bourell, D. L., & Beaman, J. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2011-0123 · Cited by 37
Flowability of powders for selective laser sintering (SLS) investigated by round robin test
Schmid, M., Amado, F., Levy, G. N., & Wegener, K. (2014) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010057806 · Cited by 31
You, W., Wang, M., Lam, W., & Yuk, W. (2010) · InTech eBooks · doi:10.5772/8574 · Cited by 30
Cruz, F. (2010) · Biopolymers · doi:10.5772/10264 · Cited by 28
Wen, S., Yan, C., Wei, Q. S., Zhang, L. C., Zhao, X. L., Zhu, W., & Shi, Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.949406 · Cited by 27
Thieringer, F. M., Sharma, N., Mootien, A., Schumacher, R., & Honigmann, P. (2017) · Springer eBooks · doi:10.1007/978-3-319-66866-6_29 · Cited by 22
Selective laser sintering of PCL/TCP composites for tissue engineering scaffolds
Chung, H., Jee, H., & Das, S. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-009-1141-6 · Cited by 20
Growth of Dense, Vertical and Horizontal Graphene and Its Thermal Properties
Kawabata, A., Murakami, T., Nihei, M., & Yokoyama, N. (2013) · Japanese Journal of Applied Physics · doi:10.7567/jjap.52.04cb06 · Cited by 14
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Self-citationAdditive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Metadata
- Authors
- Yuan, S., Shen, F., Chua, C. K., & Zhou, K.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 91
- Pages
- 141-168
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2899634717
- Cited by
- 525
- References
- 167
- FWCI
- 25.62
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.