The DOI matches its Crossref record; 204 of the 205 references it cites were found in a registry or an index.
Adsorption of Carbon Dioxide for Post-combustion Capture: A Review
Open accessAbstract
Aiming at meeting the global goals established for carbon dioxide (CO2) reduction, carbon capture and storage (CCS) plays a key role. In this framework, the adsorption-based CO2 post-combustion capture is considered one of the most promising approaches because it can provide remarkable energy savings with respect to the standard amine-based absorption capture. To date, most of the research effort has been devoted to the development of novel cutting-edge adsorbent materials with the primary purpose of enhancing the adsorption capacity and lifetime while reducing the heat of adsorption, thus lessening the energetic requirement of the sorbent regeneration. Anyway, other factors, beyond the sorbents, greatly affect the competitiveness of the CO2 capture based on the adsorption route, namely, the gas–solid contacting system, impacting the sorbent utilization efficiency, and the regeneration strategies, determining most of the global CO2 capture costs. This review describes the state-of-the-art and most recent progresses of the adsorption-based CO2 post-combustion capture. In particular, the first section describes the CO2 adsorption performances of different classes of solid sorbents on the basis of the most important evaluation parameters (equilibrium adsorption capacity, multi-cyclic stability, etc.). In the second section, the two main gas–solid contacting systems, i.e., fixed beds and fluidized beds, have been reviewed, pointing out their strengths and limitations. Finally, the third section provides a review on the different regeneration modes (temperature, pressure, or hybrid swings), with a focus on the possible strategies available to limit the energy penalty.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“unlike the microporous organic polymers, there are not any complexity or concern regarding the synthesis, cost and environmental aspects of synthesis of carbon-based adsorbents [11,18,20,33].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [11]
Citations
Cites
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
A review on production of metal organic frameworks (MOF) for CO2 adsorption
Ghanbari, T., Abnisa, F., & Wan Daud, W. M. A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135090 · Cited by 723
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
CO2 adsorption in Y and X zeolites modified by alkali metal cation exchange
Walton, K. S., Abney, M. B., & Douglas LeVan, M. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.023 · Cited by 537
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
Applications of metal-organic frameworks featuring multi-functional sites
Li, B., Chrzanowski, M., Zhang, Y., & Ma, S. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.05.005 · Cited by 520
Application of natural zeolites in the purification and separation of gases
Ackley, M. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00353-6 · Cited by 494
Adsorption of CO2 on Zeolites at Moderate Temperatures
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Losch, J. (2005) · Energy & Fuels · doi:10.1021/ef040059h · Cited by 491
Mangun, C. L., Benak, K. R., Economy, J., & Foster, K. L. (2001) · Carbon · doi:10.1016/s0008-6223(00)00319-5 · Cited by 490
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
A Microporous Metal−Organic Framework for Separation of CO2/N2 and CO2/CH4 by Fixed-Bed Adsorption
Bastin, L., Bárcia, P. S., Hurtado, E. J., Silva, J. A. C., Rodrigues, A. E., & Chen, B. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077618g · Cited by 442
Abanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
New Insights into the Interactions of CO2 with Amine-Functionalized Silica
Serna-Guerrero, R., Da’na, E., & Sayari, A. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801186g · Cited by 404
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications
Darabi, A., Jessop, P. G., & Cunningham, M. F. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00873e · Cited by 391
Thermodynamics: Foundations and Applications
Gyftopoulos, E. P., & Beretta, G. P. (2010) · CERN Document Server (European Organization for Nuclear Research) · Cited by 385
Xu, X., Song, C., Miller, B. G., & Scaroni, A. W. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050382n · Cited by 379
Characterization and application of activated carbon produced by H3PO4 and water vapor activation
Budinova, T., Ekinci, E., Yardim, F., Grimm, A., Björnbom, E., Minkova, V., & Goranova, M. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.06.005 · Cited by 366
CO2 adsorption in single-walled carbon nanotubes
Cinke, M., Li, J., Bauschlicher, C. W., Ricca, A., & Meyyappan, M. (2003) · Chemical Physics Letters · doi:10.1016/s0009-2614(03)01124-2 · Cited by 365
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Fluorous Metal−Organic Frameworks for High-Density Gas Adsorption
Yang, C., Wang, X., & Omary, M. A. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0775265 · Cited by 352
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Amine–Oxide Hybrid Materials for CO2 Capture from Ambient Air
Didas, S. A., Choi, S., Chaikittisilp, W., & Jones, C. W. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00284 · Cited by 342
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Self-citationValorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Capture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311
A Review of Carbon Nanotube Synthesis via Fluidized-Bed Chemical Vapor Deposition
See, C. H., & Harris, A. T. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060955b · Cited by 306
Metal‐Organic Frameworks/Graphene‐Based Materials: Preparations and Applications
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804950 · Cited by 304
Structured adsorbents in gas separation processes
Rezaei, F., & Webley, P. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.10.004 · Cited by 294
Synthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents
Drese, J. H., Choi, S., Lively, R. P., Koros, W. J., Fauth, D. J., Gray, M. L., & Jones, C. W. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901461 · Cited by 287
Merel, J., Clausse, M., & Meunier, F. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071012x · Cited by 286
CO2 capture from dry flue gas by vacuum swing adsorption: A pilot plant study
Krishnamurthy, S., Rao, V. R., Guntuka, S., Sharratt, P., Haghpanah, R., Rajendran, A., Amanullah, M., Karimi, I. A., & Farooq, S. (2014) · AIChE Journal · doi:10.1002/aic.14435 · Cited by 282
Toward the Development and Deployment of Large-Scale Carbon Dioxide Capture and Conversion Processes
Yuan, Z., Eden, M. R., & Gani, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03277 · Cited by 282
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Saha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
The Effect of Water on the Adsorption of CO2 and C3H8 on Type X Zeolites
Brandani, F., & Ruthven, D. M. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie040183o · Cited by 264
Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review
Kamran, U., & Park, S.-J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125776 · Cited by 262
Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group
Yue, M. B., Sun, L. B., Cao, Y., Wang, Z. J., Wang, Y., Yu, Q., & Zhu, J. H. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.016 · Cited by 261
Riboldi, L., & Bolland, O. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1385 · Cited by 256
Post combustion CO2 capture by carbon fibre monolithic adsorbents
Thiruvenkatachari, R., Su, S., An, H., & Yu, X. X. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.05.003 · Cited by 251
Capture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption
Xiao, P., Zhang, J., Webley, P., Li, G., Singh, R., & Todd, R. (2008) · Adsorption · doi:10.1007/s10450-008-9128-7 · Cited by 248
Porous graphene oxide frameworks: Synthesis and gas sorption properties
Srinivas, G., Burress, J. W., Ford, J., & Yildirim, T. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11699a · Cited by 243
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.004 · Cited by 237
Monoethanol Amine Modified Zeolite 13X for CO2Adsorption at Different Temperatures
Jadhav, P. D., Chatti, R. V., Biniwale, R. B., Labhsetwar, N. K., Devotta, S., & Rayalu, S. S. (2007) · Energy & Fuels · doi:10.1021/ef070038y · Cited by 236
Kinetics of CO2 adsorption on cherry stone-based carbons in CO2/CH4 separations
Álvarez-Gutiérrez, N., Gil, M. V., Rubiera, F., & Pevida, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.077 · Cited by 236
Adsorption technology for CO2 separation and capture: a perspective
Webley, P. A. (2014) · Adsorption · doi:10.1007/s10450-014-9603-2 · Cited by 234
Plaza, M. G., González, A. S., Pis, J. J., Rubiera, F., & Pevida, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.058 · Cited by 233
Performance of immobilized tertiary amine solid sorbents for the capture of carbon dioxide
Gray, M. L., Champagne, K. J., Fauth, D., Baltrus, J. P., & Pennline, H. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00088-6 · Cited by 231
Purification and upgrading of biogas by pressure swing adsorption on synthetic and natural zeolites
Alonso-Vicario, A., Ochoa-Gómez, J. R., Gil-Río, S., Gómez-Jiménez-Aberasturi, O., Ramírez-López, C. A., Torrecilla-Soria, J., & Domínguez, A. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.05.014 · Cited by 226
A Critical Review of CO2 Capture Technologies and Prospects for Clean Power Generation
Sifat, N. S., & Haseli, Y. (2019) · Energies · doi:10.3390/en12214143 · Cited by 226
CO2 Capture by Temperature Swing Adsorption: Use of Hot CO2-Rich Gas for Regeneration
Ntiamoah, A., Ling, J., Xiao, P., Webley, P. A., & Zhai, Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01384 · Cited by 219
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martín, C. F., Rubiera, F., & Pis, J. J. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.025 · Cited by 216
Isotherms and thermodynamics of CO2 adsorption on a novel carbon-magnetite composite sorbent
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2018) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2018.04.037 · Cited by 215
Self-citationOptimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
Self-citationBerger, A. H., & Bhown, A. S. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.089 · Cited by 201
Multi-bed Vacuum Pressure Swing Adsorption for carbon dioxide capture from flue gas
Liu, Z., Grande, C. A., Li, P., Yu, J., & Rodrigues, A. E. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.07.037 · Cited by 196
Advancement in porous adsorbents for post-combustion CO2 capture
Modak, A., & Jana, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.018 · Cited by 196
CO2 capture from dry flue gas by means of VPSA, TSA and TVSA
Jiang, N., Shen, Y., Liu, B., Zhang, D., Tang, Z., Li, G., & Fu, B. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.09.012 · Cited by 195
Wang, L., Sun, F., Hao, F., Qu, Z., Gao, J., Liu, M., Wang, K., Zhao, G., & Qin, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123205 · Cited by 194
Thermodynamics and regeneration studies of CO2 adsorption on multiwalled carbon nanotubes
Hsu, S.-C., Lu, C., Su, F., Zeng, W., & Chen, W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.005 · Cited by 190
Numerical parametric study on CO2 capture by indirect thermal swing adsorption
Clausse, M., Merel, J., & Meunier, F. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.036 · Cited by 185
Mahapatra, K., Ramteke, D. S., & Paliwal, L. J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.01.009 · Cited by 184
Carbon dioxide capture and recovery by means of TSA and/or VSA
Tlili, N., Grévillot, G., & Vallières, C. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.04.005 · Cited by 182
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Arenillas, A., Rubiera, F., & Pis, J. J. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8493-x · Cited by 173
Park, Y., Moon, D.-K., Kim, Y.-H., Ahn, H., & Lee, C.-H. (2014) · Adsorption · doi:10.1007/s10450-014-9608-x · Cited by 172
Adsorption equilibrium and kinetics for SO2, NO, CO2 on zeolites FAU and LTA
Yi, H., Deng, H., Tang, X., Yu, Q., Zhou, X., & Liu, H. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.091 · Cited by 172
Adsorption equilibria and kinetics of CO2, CH4 and N2 in natural zeolites
Hernández-Huesca, R., Dı́az, L., & Aguilar-Armenta, G. (1999) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00094-x · Cited by 167
Characterization of novel geopolymer – Zeolite composites as solid adsorbents for CO2 capture
Minelli, M., Papa, E., Medri, V., Miccio, F., Benito, P., Doghieri, F., & Landi, E. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.050 · Cited by 165
Self-citationWang, L., Liu, Z., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.017 · Cited by 161
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X. D., Wang, L., Zhao, Y., Lin, Y., Sun, Y. J., DaCosta, H. F. M., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 161
Raganati, F., Chirone, R., & Ammendola, P. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b04901 · Cited by 160
Self-citationGeopolymers as solid adsorbent for CO2 capture
Minelli, M., Medri, V., Papa, E., Miccio, F., Landi, E., & Doghieri, F. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.04.013 · Cited by 158
Self-citationThe role of the extra-framework cations in the adsorption of CO2 on faujasite Y
Pirngruber, G. D., Raybaud, P., Belmabkhout, Y., Čejka, J., & Zukal, A. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/b927476f · Cited by 156
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Elfving, J., Bajamundi, C., Kauppinen, J., & Sainio, T. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.10.010 · Cited by 148
Evaluating Pressure Swing Adsorption as a CO2 separation technique in coal-fired power plants
Riboldi, L., & Bolland, O. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.02.001 · Cited by 144
Functionalization of Delaminated Zeolite ITQ-6 for the Adsorption of Carbon Dioxide
Zukal, A., Domínguez, I., Mayerová, J., & Čejka, J. (2009) · Langmuir · doi:10.1021/la901156z · Cited by 143
Alkali-bonded ceramics with hierarchical tailored porosity
Landi, E., Medri, V., Papa, E., Dědeček, J., Klein, P., Benito, P., & Vaccari, A. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.09.027 · Cited by 140
Adsorption separation of carbon dioxide, methane, and nitrogen on Hβ and Na-exchanged β-zeolite
Xu, X. L., Zhao, X., Sun, L., & Liu, X. (2008) · Journal of Natural Gas Chemistry · doi:10.1016/s1003-9953(09)60015-3 · Cited by 138
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Amination of Activated Carbon and Adsorption Characteristics of Its Aminated Surface
Abe, M., Kawashima, K., Kozawa, K., Sakai, H., & Kaneko, K. (2000) · Langmuir · doi:10.1021/la990976t · Cited by 137
Electric swing adsorption as emerging CO2 capture technique
Grande, C. A., Ribeiro, R. P. P. L., Oliveira, E. L. G., & Rodrigues, A. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.160 · Cited by 137
Adsorption of carbon dioxide on organically functionalized SBA-16
Wei, J., Shi, J., Pan, H., Zhao, W., Ye, Q., & Shi, Y. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.028 · Cited by 135
Gas–solid fluidization of cohesive powders
Raganati, F., Chirone, R., & Ammendola, P. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2018.03.034 · Cited by 135
Self-citationLiu, S., Ma, R., Hu, X. D., Wang, L., Wang, X., Radosz, M., & Fan, M. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 135
Onsite CO 2 Capture from Flue Gas by an Adsorption Process in a Coal-Fired Power Plant
Liu, Z., Wang, L., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3005308 · Cited by 126
Rashidi, N. A., Yusup, S. B., Borhan, A., & Loong, L. H. (2014) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0788-6 · Cited by 124
Ghiat, I., Mahmood, F., Govindan, R., & Al‐Ansari, T. A. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113668 · Cited by 120
Guillerm, V., Xu, H., Albalad, J., Imaz, I., & Maspoch, D. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09682 · Cited by 117
Energy Technology Perspectives 2020 - Special Report on Carbon Capture Utilisation and Storage
International Energy Agency (2020) · OECD eBooks · doi:10.1787/208b66f4-en · Cited by 117
Oxide‐supported tetraethylenepentamine for CO 2 capture
Fisher, J. C., Tanthana, J., & Chuang, S. S. C. (2009) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.10363 · Cited by 116
Mukhtar, A., Saqib, S., Mellon, N. B., Babar, M., Rafiq, S., Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Muhammad, N., & Chawla, M. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103203 · Cited by 116
Pröll, T., Schöny, G., Sprachmann, G., & Hofbauer, H. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.11.005 · Cited by 113
Continuous CO2 capture in a circulating fluidized bed using supported amine sorbents
Veneman, R., Li, Z. S., Hogendoorn, J. A., Kersten, S. R. A., & Brilman, D. W. F. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.100 · Cited by 110
Keramati, M., & Ghoreyshi, A. A. (2013) · Physica E Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2013.10.024 · Cited by 102
Pirngruber, G. D., Guillou, F., Gomez, A., & Clausse, M. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.01.010 · Cited by 99
Recent advances on kinetics of carbon dioxide capture using solid sorbents at elevated temperatures
Ji, G., Yang, H., Memon, M. Z., Gao, Y., Qu, B., Fu, W., Olguin, G., Zhao, M. M., & Li, A. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114874 · Cited by 97
Monazam, E. R., Spenik, J., & Shadle, L. J. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.02.041 · Cited by 94
CO2 capture performance of HKUST-1 in a sound assisted fluidized bed
Raganati, F., Gargiulo, V., Ammendola, P., Alfè, M., & Chirone, R. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.11.005 · Cited by 93
Self-citationTemperature swing adsorption process with indirect cooling and heating
Bonjour, J., Chalfen, J.-B., & Meunier, F. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie011011j · Cited by 92
Yang, W., & Hoffman, J. S. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800172e · Cited by 91
Zhang, W., Liu, H., Sun, C., Drage, T. C., & Snape, C. E. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.063 · Cited by 90
Zhao, Q., Wu, F., Men, Y., Fang, X., Zhao, J., Xiao, P., Webley, P. A., & Grande, C. A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.196 · Cited by 90
Fixed bed adsorption as affected by thermodynamics and kinetics: yellow tuff for CO2 capture
Ammendola, P., Raganati, F., Chirone, R., & Miccio, F. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.075 · Cited by 88
Self-citationSchöny, G., Dietrich, F., Fuchs, J., Pröll, T., & Hofbauer, H. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.11.066 · Cited by 85
Raganati, F., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123658 · Cited by 83
Self-citationNikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04270 · Cited by 82
CO2 Adsorption on SBA-15 Modified by Aminosilane
Wang, L., Ma, L., Wang, A., Qian, L. I. U., & Zhang, T. (2007) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(07)60066-7 · Cited by 81
Yeast‐Based Microporous Carbon Materials for Carbon Dioxide Capture
Shen, W., He, Y. H., Zhang, S., Li, J., & Fan, W. (2012) · ChemSusChem · doi:10.1002/cssc.201100735 · Cited by 81
Moving bed adsorption process with internal heat integration for carbon dioxide capture
Kim, K., Son, Y., Lee, W. B., & Lee, K. S. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.04.005 · Cited by 80
Chemical modification of activated carbon monoliths for CO2 adsorption
Vargas, D. P., Giraldo, L., Erto, A., & Moreno‐Piraján, J. C. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3086-3 · Cited by 78
Effect of exfoliation temperature on carbon dioxide capture of graphene nanoplates
Meng, L., & Park, S. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.07.025 · Cited by 76
Zhao, Q., Wu, F., He, Y., Xiao, P., & Webley, P. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.123 · Cited by 76
Raganati, F., Ammendola, P., & Chirone, R. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.073 · Cited by 75
Self-citationMondino, G., Grande, C. A., Blom, R., & Nord, L. O. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.03.021 · Cited by 74
Mallesh, D., Anbarasan, J., Kumar, P. M., Upendar, K., Chandrashekar, P., Rao, B. V. S. K., & Lingaiah, N. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147226 · Cited by 74
A comprehensive modeling of the hybrid temperature electric swing adsorption process for CO2 capture
Lillia, S., Bonalumi, D., Grande, C. A., & Manzolini, G. (2018) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2018.04.012 · Cited by 72
Plaza, M. G., Rubiera, F., & Pevida, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01508 · Cited by 70
CO2 capture from flue gas by two successive VPSA units using 13XAPG
Wang, L., Liu, Z., Li, P., Wang, J., & Yu, J. (2012) · Adsorption · doi:10.1007/s10450-012-9431-1 · Cited by 69
Gargiulo, V., Alfè, M., Raganati, F., Lisi, L., Chirone, R., & Ammendola, P. (2018) · Fuel · doi:10.1016/j.fuel.2018.02.093 · Cited by 66
Self-citationHollow fiber adsorbents for CO2 capture: Kinetic sorption performance
Lively, R. P., Leta, D. P., DeRites, B. A., Chance, R. R., & Koros, W. J. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.004 · Cited by 65
Fujiki, J., Chowdhury, F. A., Yamada, H., & Yogo, K. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.071 · Cited by 65
Effect of characteristics of KI-impregnated activated carbon and flue gas components on Hg0 removal
Li, T., Yue, T., Zuo, P., Zhang, X., Wang, C., Gao, J., & Wang, K. (2017) · Fuel · doi:10.1016/j.fuel.2016.12.083 · Cited by 63
Sound-Assisted Fluidization for Temperature Swing Adsorption and Calcium Looping: A Review
Raganati, F., & Ammendola, P. (2021) · Materials · doi:10.3390/ma14030672 · Cited by 63
Self-citationRaganati, F., Ammendola, P., & Chirone, R. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.05.001 · Cited by 62
Self-citationCarbon dioxide adsorption in chemically activated carbon from sewage sludge
de Andrés, J. M., Orjales, L., Narros, A., García-Soto, M. D. M. D. L. F., & Hurtado, M. E. R. (2013) · Journal of the Air & Waste Management Association · doi:10.1080/10962247.2013.772927 · Cited by 61
Thermal Management of Structured Adsorbents in CO2 Capture Processes
Rezaei, F., & Grahn, M. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201057p · Cited by 61
Enhancement of CO2 capture at Ca-looping conditions by high-intensity acoustic fields
Valverde, J. M., Raganati, F., Quintanilla, M. A. S., Ebri, J. M. P., Ammendola, P., & Chirone, R. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.012 · Cited by 60
Self-citationThermodynamics and regeneration of CO2 adsorption on mesoporous spherical-silica particles
Lu, C., Su, F., Hsu, S.-C., Chen, W., Bai, H., Hwang, J. F., & Lee, H.-H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.08.002 · Cited by 59
Xu, C., Ruan, C., Li, Y., Lindh, J., & Strømme, M. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700147 · Cited by 58
Schöny, G., Zehetner, E., Fuchs, J., Pröll, T., Sprachmann, G., & Hofbauer, H. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2015.12.018 · Cited by 57
Nelson, T. O., Kataria, A., Mobley, P. D., Soukri, M., & Tanthana, J. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1409 · Cited by 56
CO2 capture performances of fine solid sorbents in a sound-assisted fluidized bed
Raganati, F., Ammendola, P., & Chirone, R. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.08.062 · Cited by 55
Self-citationApplication of carbon fibre composites to CO2 capture from flue gas
Thiruvenkatachari, R., Su, S., Yu, X. X., & Bae, J. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.12.014 · Cited by 54
Isosteric heats of adsorption of carbon dioxide on zeolite MCM-22 modified by alkali metal cations
Zukal, A., Pawlesa, J., & Čejka, J. (2009) · Adsorption · doi:10.1007/s10450-009-9178-5 · Cited by 54
Plaza, M. G., & Rubiera, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.079 · Cited by 53
Insights into utilization of strontium carbonate for thermochemical energy storage
Ammendola, P., Raganati, F., Miccio, F., Murri, A. N., & Landi, E. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.05.048 · Cited by 52
Self-citationMicrowave assisted vacuum regeneration for CO2 capture from wet flue gas
Webley, P. A., & Zhang, J. (2013) · Adsorption · doi:10.1007/s10450-013-9563-y · Cited by 50
Ammendola, P., Raganati, F., & Chirone, R. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.03.010 · Cited by 46
Self-citationRole of Acoustic Fields in Promoting the Gas-Solid Contact in a Fluidized Bed of Fine Particles
Raganati, F., Ammendola, P., & Chirone, R. (2014) · KONA Powder and Particle Journal · doi:10.14356/kona.2015006 · Cited by 46
Self-citationGargiulo, V., Alfè, M., Ammendola, P., Raganati, F., & Chirone, R. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.026 · Cited by 44
Self-citationBoscherini, M., Miccio, F., Papa, E., Medri, V., Landi, E., Doghieri, F., & Minelli, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127315 · Cited by 44
Self-citationDelgado, J. A., Uguina, M. A., Sotelo, J. L., & Ruíz, B. L. (2005) · Separation and Purification Technology · doi:10.1016/j.seppur.2005.08.011 · Cited by 43
Wang, Y., Guan, C., Wang, K., Guo, C., & Li, C. M. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je100840n · Cited by 43
Preparation of nitrogen doped carbon from tree leaves as efficient CO2 adsorbent
Xu, J., Shi, J., Cui, H., Yan, N., & Liu, Y. (2018) · Chemical Physics Letters · doi:10.1016/j.cplett.2018.09.038 · Cited by 43
Effect of acoustic field on CO2 desorption in a fluidized bed of fine activated carbon
Raganati, F., Ammendola, P., & Chirone, R. (2015) · Particuology · doi:10.1016/j.partic.2015.02.001 · Cited by 41
Self-citationAnalysis of dynamic CO2 capture over 13X zeolite monoliths in the presence of SOx , NOx and humidity
Al‐Naddaf, Q., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2020) · AIChE Journal · doi:10.1002/aic.16297 · Cited by 39
Newsome, D., Gunawan, S., Baron, G. V., Denayer, J. F. M., & Coppens, M. (2013) · Adsorption · doi:10.1007/s10450-013-9560-1 · Cited by 38
Warmuziński, K., Tańczyk, M., & Jaschik, M. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.03.009 · Cited by 36
Multistage Fluidized Bed Reactor Performance Characterization for Adsorption of Carbon Dioxide
Roy, S., Mohanty, C. R., & Meikap, B. C. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901133r · Cited by 36
Biogas cleaning and upgrading with natural zeolites from tuffs
Paolini, V., Petracchini, F., Guerriero, E., Bencini, A., & Drigo, S. (2015) · Environmental Technology · doi:10.1080/09593330.2015.1118557 · Cited by 36
Park, Y. C., Jo, S.-H., Kyung, D.-H., Kim, J., Yi, C.-K., Ryu, C. K., & Shin, M. S. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.245 · Cited by 35
Intensified carbon capture using adsorption: Heat transfer challenges and potential solutions
McDonough, J. R., Law, R., Reay, D. A., & Živković, V. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.07.012 · Cited by 34
Preparation of carbon-based monolithic CO2 adsorbents with hierarchical pore structure
Kutorglo, E. M., Kovačovič, J., Trunov, D., Hassouna, F., Fučíková, A., Kopecký, D., Sedlářová, I., & Šoóš, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124308 · Cited by 34
Reinventing rice husk ash: derived NaX zeolite as a high-performing CO2 adsorbent
Gargiulo, N., Shibata, K., Peluso, A., Aprea, P., Valente, T., Pezzotti, G., Shiono, T., & Caputo, D. (2017) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-017-1534-5 · Cited by 33
Zaabout, A., Romano, M. C., Cloete, S. W. P., Giuffrida, A., Morud, J. C., Chiesa, P., & Amini, S. (2017) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2017.03.001 · Cited by 32
CO2 Capture Test for A Moving-bed System Utilizi g Low-temperature Steam
Okumura, T., Ogino, T., Nishibe, S., Nonaka, Y., Shoji, T., & Higashi, T. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.243 · Cited by 30
Dhoke, C., Zaabout, A., Cloete, S. W. P., Seo, H., Park, Y.-K., Demoulin, L., & Amini, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05951 · Cited by 30
Zheng, W., Huang, K., & Dai, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109653 · Cited by 29
Cai, W., Ding, J., He, Y., Chen, X., Yuan, D., Chen, C., Cheng, L., Du, W., Wan, H. L., & Guan, G. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00294 · Cited by 29
Grande, C. A., Kvamsdal, H. M., Mondino, G., & Blom, R. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1357 · Cited by 28
Pirklbauer, J., Schöny, G., Pröll, T., & Hofbauer, H. (2018) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2018.03.018 · Cited by 28
Investigating wall-to-bed heat transfer in view of a continuous temperature swing adsorption process
Höfer, G., Schöny, G., Fuchs, J., & Pröll, T. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.09.024 · Cited by 22
Mohanty, C. R., Rajmohan, B., & Meikap, B. C. (2009) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2009.11.015 · Cited by 21
Adsorption modeling of CO2 in fluidized bed reactor
Yaghoobi-Khankhajeh, S., Alizadeh, R., & Zarghami, R. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2017.10.037 · Cited by 20
Isothermal composite adsorbent. Part I: Thermal characterisation
Meljac, L., Goetz, V., & Py, X. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.07.037 · Cited by 16
Yu, P., Luo, Z., Wang, Q., Fang, M., Zhou, J., Wang, W., Liang, X., & Cai, W. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101214 · Cited by 16
Hornbostel, M. D. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1337051 · Cited by 13
Research works printed but not linked: 3
- Tarka, T. J., Jr.; Ciferno, J. P.; Gray, M. L.; Fauth, D. J. CO 2 capture systems utilizing amine enhanced solid sorbents. Proceedings of the 5th Annual Conference on Carbon Capture & Sequestration ; Alexandria, VA, May 8–11,2006.
- 10.1016/j.micromeso.2018.09.018 · DOI · Paper page
- Berg C., 1946, Trans. AIChE, 42, 665
Cited by
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108861 · Cited by 378
Lyu, H., Chen, O. I.-F., Hanikel, N., Hossain, M. I., Flaig, R. W., Pei, X., Amin, A., Doherty, M. D., Impastato, R. K., Glover, T. G., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c13368 · Cited by 369
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Self-citationApplication of isotherms models and error functions in activated carbon CO2 sorption processes
Serafin, J., & Dziejarski, B. (2023) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2023.112513 · Cited by 268
“To effectively remove CO 2 from the flue gas mixture, the synthesized sorbent material should have strictly defined desired properties and meet engineering and economic criteria [27].”
Wen, C., Liu, T., Wang, D., Wang, Y., Chen, H., Luo, G., Zhou, Z., Li, C., & Xu, M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101098 · Cited by 252
Metadata
- Authors
- Raganati, F., Miccio, F., & Ammendola, P.
- Affiliations
- National Research Council (IT)
- Institute of Science, Technology and Sustainability for Ceramics (IT)
- Corresponding author
- Ammendola, Paola
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-05
- Volume
- 35
- Issue
- 16
- Pages
- 12845-12868
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W3191648510
- Cited by
- 661
- References
- 205
- Citations by year
- 2026: 169 · 2025: 180 · 2024: 140 · 2023: 110 · 2022: 58 · 2021: 4
- FWCI
- 33.34
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Energy & Fuels (publishedVersion, cc-by)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 adsorption, post-combustion CO2 capture, carbon capture and storage, solid sorbents, fixed bed, fluidized bed, adsorbent regeneration, temperature swing, pressure swing, adsorption capacity, energy penalty, CO2 reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.