The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Photopolymerization in 3D Printing
Open accessAbstract
Abstract The field of 3D printing is continuing its rapid development in both academic and industrial research environments. The development of 3D printing technologies has opened new implementations in rapid prototyping, tooling, dentistry, microfluidics, biomedical devices, tissue engineering, drug delivery, etc. Among different 3D printing techniques, photopolymerization-based process (such as stereolithography and digital light processing) offers flexibility over the final properties of the 3D printed materials (such as optical, chemical, and mechanical properties) using versatile polymer chemistry. The strategy behind the 3D photopolymerization is based on using monomers/oligomers in liquid state (in the presence of photoinitiators) that can be photopolymerized (via radical or cationic mechanism) upon exposure to light source of different wavelengths (depending on the photoinitiator system). An overview of recent evolutions in the field of photopolymerization-based 3D printing and highlights of novel 3D printable photopolymers is provided herein. Challenges that limit the use of conventional photopolymers (i.e., initiation under UV light) together with prospective solutions such as incorporation of photosensitive initiators with red-shifted absorptions are also discussed in detail. This review also spotlights recent progress on the use of controlled living radical photopolymerization techniques (i.e., reversible addition–fragmentation chain-transfer polymerization) in 3D printing, which will pave the way for widespread growth of new generations of 3D materials with living features and possibility for postprinting modifications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hoyle, C. E., & Bowman, C. N. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903924 · Cited by 4,182
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Über Elementarakte mit zwei Quantensprüngen
Göppert‐Mayer, M. (1931) · Annalen der Physik · doi:10.1002/andp.19314010303 · Cited by 2,691
Merging Photoredox Catalysis with Organocatalysis: The Direct Asymmetric Alkylation of Aldehydes
Nicewicz, D. A., & MacMillan, D. W. C. (2008) · Science · doi:10.1126/science.1161976 · Cited by 2,489
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Two‐Photon Absorption and the Design of Two‐Photon Dyes
Pawlicki, M., Collins, H. A., Denning, R. G., & Anderson, H. L. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200805257 · Cited by 2,019
Discovery and development of sorafenib: a multikinase inhibitor for treating cancer
Wilhelm, S., Carter, C., Lynch, M., Lowinger, T., Dumas, J., Smith, R. A., Schwartz, B., Simantov, R., & Kelley, S. (2006) · Nature Reviews Drug Discovery · doi:10.1038/nrd2130 · Cited by 1,829
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Pneumatic Networks for Soft Robotics that Actuate Rapidly
Mosadegh, B., Polygerinos, P., Keplinger, C., Wennstedt, S., Shepherd, R. F., Gupta, U., Shim, J., Bertoldi, K., Walsh, C. J., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303288 · Cited by 1,607
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Thiol–enes: Chemistry of the past with promise for the future
Hoyle, C. E., Lee, T. Y., & Roper, T. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20366 · Cited by 1,457
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yağcı, Y., Jockusch, S., & Turro, N. J. (2010) · Macromolecules · doi:10.1021/ma1007545 · Cited by 1,432
Radical addition–fragmentation chemistry in polymer synthesis
Moad, G., Rizzardo, E., & Thang, S. H. (2008) · Polymer · doi:10.1016/j.polymer.2007.11.020 · Cited by 1,397
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Macromolecular Engineering by Atom Transfer Radical Polymerization
Matyjaszewski, K., & Tsarevsky, N. V. (2014) · Journal of the American Chemical Society · doi:10.1021/ja408069v · Cited by 1,159
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
A Resilient, Untethered Soft Robot
Tolley, M. T., Shepherd, R. F., Mosadegh, B., Galloway, K. C., Wehner, M., Karpelson, M., Wood, R. J., & Whitesides, G. M. (2014) · Soft Robotics · doi:10.1089/soro.2014.0008 · Cited by 1,089
Photoredox Catalysis with Visible Light
Zeitler, K. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200904056 · Cited by 991
Xu, J., Jung, K., Atme, A., Shanmugam, S., & Boyer, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja501745g · Cited by 990
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
The power of thiol‐ene chemistry
Kade, M. J., Burke, D. J., & Hawker, C. J. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23824 · Cited by 853
Photoinduced Electron Transfer Reactions for Macromolecular Syntheses
Dadashi-Silab, S., Doran, S., & Yagci, Y. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00586 · Cited by 846
Control of a Living Radical Polymerization of Methacrylates by Light
Fors, B. P., & Hawker, C. J. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201203639 · Cited by 820
Photoinduced Plasticity in Cross-Linked Polymers
Scott, T. F., Schneider, A. D., Cook, W. D., & Bowman, C. N. (2005) · Science · doi:10.1126/science.1110505 · Cited by 776
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Photocatalysis in organic and polymer synthesis
Corrigan, N., Shanmugam, S., Xu, J., & Boyer, C. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00185h · Cited by 724
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Mann, B. K., Gobin, A. S., Tsai, A. T., Schmedlen, R. H., & West, J. L. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00051-5 · Cited by 704
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Visible Light and Sunlight Photoinduced ATRP with ppm of Cu Catalyst
Konkolewicz, D., Schröder, K., Buback, J., Bernhard, S., & Matyjaszewski, K. (2012) · ACS Macro Letters · doi:10.1021/mz300457e · Cited by 593
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Novel Materials for 3D Printing by Photopolymerization
Layani, M., Wang, X., & Magdassi, S. (2018) · Advanced Materials · doi:10.1002/adma.201706344 · Cited by 561
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Shanmugam, S., Xu, J., & Boyer, C. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05274 · Cited by 521
Expanding the Scope of RAFT Polymerization: Recent Advances and New Horizons
Hill, M. R., Carmean, R. N., & Sumerlin, B. S. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00342 · Cited by 494
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Pham, P. V., Nagib, D. A., & MacMillan, D. W. C. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101861 · Cited by 471
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
High performance polymer nanocomposites for additive manufacturing applications
de Leon, A. C., Chen, Q., Palaganas, N. B., Palaganas, J. O., Manapat, J., & Advincula, R. C. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.04.010 · Cited by 467
Niu, J., Lunn, D. J., Pusuluri, A., Yoo, J. I., O'Malley, M. A., Mitragotri, S., Soh, H. T., & Hawker, C. J. (2017) · Nature Chemistry · doi:10.1038/nchem.2713 · Cited by 453
Toughening of photo-curable polymer networks: a review
Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py01631b · Cited by 447
Xu, J., Shanmugam, S., Duong, H. T., & Boyer, C. (2015) · Polymer Chemistry · doi:10.1039/c4py01317d · Cited by 446
Stereolithography of SiOC Ceramic Microcomponents
Zanchetta, E., Cattaldo, M., Franchin, G., Schwentenwein, M., Homa, J., Brusatin, G., & Colombo, P. (2016) · Advanced Materials · doi:10.1002/adma.201503470 · Cited by 432
Digital light processing 3D printing of conductive complex structures
Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411
Reprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Zhang, J., & Xiao, P. (2018) · Polymer Chemistry · doi:10.1039/c8py00157j · Cited by 381
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Miyake, G. M., & Theriot, J. C. (2014) · Macromolecules · doi:10.1021/ma502044f · Cited by 351
Shanmugam, S., Xu, J., & Boyer, C. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201510037 · Cited by 342
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Optical approach to resin formulation for 3D printed microfluidics
Gong, H., Beauchamp, M., Perry, S., Woolley, A. T., & Nordin, G. P. (2015) · RSC Advances · doi:10.1039/c5ra23855b · Cited by 315
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Two-photon lithography of nanorods in SU-8 photoresist
Juodkazis, S., Mizeikis, V., Seet, K. K., Miwa, M., & Misawa, H. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/6/039 · Cited by 309
Xu, J., Jung, K., & Boyer, C. (2014) · Macromolecules · doi:10.1021/ma500883y · Cited by 304
Evaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M., Cinar, A., Mehdizadeh, H., Somo, S., Dean, D., Brey, E. M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403943 · Cited by 301
3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279
Bagheri, A., Arandiyan, H., Boyer, C., & Lim, M. (2016) · Advanced Science · doi:10.1002/advs.201500437 · Cited by 265
Self-citationYang, J., Han, C.-R., Duan, J.-F., Xu, F., & Sun, R.-C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4001997 · Cited by 261
Rapid continuous 3D printing of customizable peripheral nerve guidance conduits
Zhu, W., Tringale, K. R., Woller, S. A., You, S., Johnson, S., Shen, H., Schimelman, J., Whitney, M., Steinauer, J., Xu, W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.04.001 · Cited by 253
Photochemistry and Photophysics of Polymer Materials
(2010) · Wiley eBooks · doi:10.1002/9780470594179 · Cited by 249
Two-photon absorption cross-sections of common photoinitiators
Schafer, K. J., Hales, J. M., Balu, M., Belfield, K. D., Van Stryland, E. W., & Hagan, D. J. (2004) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(03)00394-0 · Cited by 247
Review: Polymeric-Based 3D Printing for Tissue Engineering
Wu, G.-H., & Hsu, S.-H. (2015) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-015-0038-3 · Cited by 239
3D printing of biomimetic microstructures for cancer cell migration
Huang, T. Q., Qu, X., Liu, J., & Chen, S. (2014) · Biomedical Microdevices · doi:10.1007/s10544-013-9812-6 · Cited by 237
Chen, M., MacLeod, M. J., & Johnson, J. A. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00241 · Cited by 217
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
Lu, L., Zhang, H., Yang, N., & Cai, Y. (2006) · Macromolecules · doi:10.1021/ma060157x · Cited by 205
Methods for Photocrosslinking Alginate Hydrogel Scaffolds with High Cell Viability
Rouillard, A. D., Berglund, C. M., Lee, J. Y., Polacheck, W. J., Tsui, Y., Bonassar, L. J., & Kirby, B. J. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0582 · Cited by 200
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Chen, M., Gu, Y., Singh, A., Zhong, M., Jordan, A. M., Biswas, S., Korley, L. T. J., Balazs, A. C., & Johnson, J. A. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00335 · Cited by 189
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Matsumura, S., Hlil, A. R., Lepiller, C., Gaudet, J., Guay, D., Shi, Z., Holdcroft, S., & Hay, A. S. (2008) · Macromolecules · doi:10.1021/ma071422x · Cited by 187
Photo‐controlled Growth of Telechelic Polymers and End‐linked Polymer Gels
Zhou, H., & Johnson, J. A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201207966 · Cited by 185
Fairbanks, B. D., Sims, E. A., Anseth, K. S., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma1002968 · Cited by 177
Photochemically Driven Polymeric Network Formation: Synthesis and Applications
Blasco, E., Wegener, M., & Barner‐Kowollik, C. (2017) · Advanced Materials · doi:10.1002/adma.201604005 · Cited by 175
Ohtsuki, A., Goto, A., & Kaji, H. (2013) · Macromolecules · doi:10.1021/ma302244j · Cited by 174
Tucker, B. S., Coughlin, M. L., Figg, C. A., & Sumerlin, B. S. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00140 · Cited by 173
Photopolymerization in dispersed systems
Jasinski, F., Zetterlund, P. B., Braun, A. M., & Chemtob, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.006 · Cited by 166
Ovsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.48 · Cited by 160
Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing
Kabb, C. P., O’Bryan, C. S., Deng, C. C., Angelini, T. E., & Sumerlin, B. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02441 · Cited by 160
Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials
Moraes, R. R., Garcia, J. W., Barros, M. D., et al. (2011) · Dental Materials · doi:10.1016/j.dental.2011.01.006 · Cited by 153
Porous polymeric materials by 3D printing of photocurable resin
Mu, X., Bertron, T., Dunn, C., Qiao, H., Wu, J., Zhao, Z., Saldaña, C., & Qi, H. J. (2017) · Materials Horizons · doi:10.1039/c7mh00084g · Cited by 153
Catalyst-Free Visible Light-Induced RAFT Photopolymerization
Xu, J., Shanmugam, S., Corrigan, N. A., & Boyer, C. A. (2015) · ACS symposium series · doi:10.1021/bk-2015-1187.ch013 · Cited by 152
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zhao, Z., Kuang, X., Yuan, C., Qi, H. J., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02444 · Cited by 152
3D‐Printable Antimicrobial Composite Resins
Yue, J., Zhao, P. T., Gerasimov, J. Y., van de Lagemaat, M., Grotenhuis, A., Rustema‐Abbing, M., van der Mei, H. C., Busscher, H. J., Herrmann, A. P., & Ren, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502384 · Cited by 150
Corrigan, N. A., Xu, J., & Boyer, C. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00542 · Cited by 145
Stereolithography‐Based Hydrogel Microenvironments to Examine Cellular Interactions
Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101023 · Cited by 135
Temperature and pH responsive 3D printed scaffolds
Dutta, S., & Cohn, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02368e · Cited by 135
Xiao, P., Dumur, F., Frigoli, M., Tehfe, M., Graff, B., Fouassier, J., Gigmès, D., & Lalevée, J. (2013) · Polymer Chemistry · doi:10.1039/c3py00766a · Cited by 133
Fu, J., Yin, H. Y., Yu, X., Xie, C. H., Jiang, H., Jin, Y., & Sheng, F. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.08.011 · Cited by 132
Beyazıt, S., Ambrosini, S., Marchyk, N., Palo, E., Kale, V., Soukka, T., Bui, B. T. S., & Haupt, K. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403576 · Cited by 130
Chan, J. W., Shin, J., Hoyle, C. E., Bowman, C. N., & Lowe, A. B. (2010) · Macromolecules · doi:10.1021/ma1004452 · Cited by 129
Additive Manufacturing Technologies: 3D Printing in Organic Synthesis
Rossi, S., Puglisi, A., & Benaglia, M. (2017) · ChemCatChem · doi:10.1002/cctc.201701619 · Cited by 127
3D printable light-responsive polymers
Roppolo, I., Chiappone, A., Angelini, A., Stassi, S., Frascella, F., Pirri, C. F., Ricciardi, C., & Descrovi, E. (2017) · Materials Horizons · doi:10.1039/c7mh00072c · Cited by 125
3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol–Gel Technique
Chiappone, A., Fantino, E., Roppolo, I., Lorusso, M., Manfredi, D., Fino, P., Pirri, C. F., & Calignano, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12578 · Cited by 124
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 121
Wang, J., Stanic, S., Altun, A. A., Schwentenwein, M., Dietliker, K., Jin, L. J., Stampfl, J., Baudis, S., Liska, R., & Grützmacher, H. (2018) · Chemical Communications · doi:10.1039/c7cc09313f · Cited by 121
Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner, R., Edler, M., Pinter, G., & Grießer, T. (2016) · Polymer Chemistry · doi:10.1039/c6py01132b · Cited by 117
3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers
Credi, C., Fiorese, A., Tironi, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08880 · Cited by 117
Noninvasive fluorescence excitation spectroscopy during application of 5-aminolevulinic acid in vivo
Juzenas, P., Juzeniene, A., Kaalhus, O., Iani, V., & Moan, J. E. (2002) · Photochemical & Photobiological Sciences · doi:10.1039/b203459j · Cited by 116
Occhetta, P., Visone, R., Russo, L., Cipolla, L., Moretti, M., & Rasponi, M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35346 · Cited by 113
Stiffness of photocrosslinked RGD‐alginate gels regulates adipose progenitor cell behavior
Chandler, E. M., Berglund, C. M., Lee, J. S., Polacheck, W. J., Gleghorn, J. P., Kirby, B. J., & Fischbach, C. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23079 · Cited by 113
In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
Fantino, E., Chiappone, A., Calignano, F., Fontana, M., Pirri, C. F., & Roppolo, I. (2016) · Materials · doi:10.3390/ma9070589 · Cited by 111
Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries
Warner, J., Soman, P., Zhu, W. Z., Tom, M., & Chen, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00140 · Cited by 109
Huang, Z., Gu, Y., Liu, X., Zhang, L., Cheng, Z., & Zhu, X. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600461 · Cited by 104
Gorsche, C., Seidler, K., Knaack, P., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py02009c · Cited by 94
Gordon, M. B., French, J. M., Wagner, N. J., & Kloxin, C. J. (2015) · Advanced Materials · doi:10.1002/adma.201503870 · Cited by 93
Cai, Y., & Jessop, J. L. P. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.031 · Cited by 92
Use of NIR light and upconversion phosphors in light-curable polymers
Stepuk, A., Mohn, D., Grass, R. N., Zehnder, M., Krämer, K. W., Pellé, F., Ferrier, A., & Stark, W. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.11.018 · Cited by 91
Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks
Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2015) · Polymer Chemistry · doi:10.1039/c4py01582g · Cited by 90
Xu, J., Shanmugam, S., & Boyer, C. A. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00460 · Cited by 89
A visible light-curable yet visible wavelength-transparent resin for stereolithography 3D printing
Park, H. K., Shin, M., Kim, B., et al. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0021-x · Cited by 87
Qin, X., Gruber, P., Marković, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014) · Polymer Chemistry · doi:10.1039/c4py00792a · Cited by 84
Quick, A. S., Fischer, J., Richter, B., Pauloehrl, T., Trouillet, V., Wegener, M., & Barner‐Kowollik, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200796 · Cited by 81
Gorsche, C., Grießer, M., Gescheidt, G., Moszner, N., & Liska, R. (2014) · Macromolecules · doi:10.1021/ma501550b · Cited by 80
Physical and Mechanical Properties of Photopolymerized Thiol−Ene/Acrylates
Senyurt, A. F., Wei, H., Phillips, B., Cole, M. C., Nazarenko, S. I., Hoyle, C. E., Piland, S. G., & Gould, T. E. (2006) · Macromolecules · doi:10.1021/ma060507f · Cited by 79
Developing Microfluidic Sensing Devices Using 3D Printing
Rusling, J. F. (2018) · ACS Sensors · doi:10.1021/acssensors.8b00079 · Cited by 76
Models of multivinyl free radical photopolymerization kinetics
Lovestead, T. M., O’Brien, A. K., & Bowman, C. N. (2003) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(03)00178-3 · Cited by 74
van Bochove, B., Hannink, G., Buma, P., & Grijpma, D. W. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600290 · Cited by 73
Photoinitiators with Functional Groups, 8
Jauk, S., & Liska, R. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500507 · Cited by 66
Méndez‐Ramos, J., Ruiz-Morales, J. C., Acosta-Mora, P., & Khaidukov, N. M. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc03315b · Cited by 64
Synthesis and 3D Printing of PEG–Poly(propylene fumarate) Diblock and Triblock Copolymer Hydrogels
Dilla, R. A., Motta, C. M., Snyder, S. R., Wilson, J. A., Wesdemiotis, C., & Becker, M. L. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00720 · Cited by 64
Polymerization of a Photocleavable Monomer Using Visible Light
Bagheri, A., Yeow, J., Arandiyan, H., Xu, J., Boyer, C. A., & Lim, M. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600127 · Cited by 59
Self-citationGel time prediction of multifunctional acrylates using a kinetics model
Boddapati, A., Rahane, S. B., Slopek, R. P., Breedveld, V., Henderson, C. L., & Grover, M. A. (2010) · Polymer · doi:10.1016/j.polymer.2010.12.024 · Cited by 58
Melhem, M. R., Park, J., Knapp, L., Reinkensmeyer, L., Cvetkovic, C., Flewellyn, J., Lee, M. K., Jensen, T., Bashir, R., Kong, H., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00176 · Cited by 56
Facile Preparation of Photocurable Siloxane Composite for 3D Printing
Palaganas, J. O., Leon, A. C. D., Mangadlao, J. D., Palaganas, N. B., Mael, A., Lee, Y. J., Lai, H. Y., & Advíncula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600477 · Cited by 54
Simultaneous Photoinduced ATRP and CuAAC Reactions for the Synthesis of Block Copolymers
Murtezi, E., & Yağcı, Y. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400372 · Cited by 53
Xie, Z., Deng, X., Liu, B., Huang, S., Ma, P., Hou, Z., Cheng, Z., Lin, J., & Luan, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09124 · Cited by 51
Sadrearhami, Z., Yeow, J., Nguyen, T., Ho, K. K. K., Kumar, N., & Boyer, C. A. (2017) · Chemical Communications · doi:10.1039/c7cc07293g · Cited by 51
Qu, X., Zhu, W. Z., Huang, S. C. M., Li, Y.-S. J., Chien, S., Zhang, K., & Chen, S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.009 · Cited by 35
Direct-print photopolymerization for 3D printing
Vatani, M., & Choi, J. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0172 · Cited by 29
Belbakra, Z., Cherkaoui, M. Z., & Allonas, X. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.09.012 · Cited by 26
Cited by
Pagac, M., Hajnys, J., Ma, Q.-P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021) · Polymers · doi:10.3390/polym13040598 · Cited by 834
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Metadata
- Authors
- Bagheri, A., & Jin, J.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-20
- Volume
- 1
- Issue
- 4
- Pages
- 593-611
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W2915400200
- Cited by
- 1,436
- References
- 148
- FWCI
- 47.88
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.