The DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index.
Lithium metal anodes for rechargeable batteries
Abstract
Lithium (Li) metal is an ideal anode material for rechargeable batteries due to its extremely high theoretical specific capacity (3860 mA h g−1), low density (0.59 g cm−3) and the lowest negative electrochemical potential (−3.040 V vs. the standard hydrogen electrode). Unfortunately, uncontrollable dendritic Li growth and limited Coulombic efficiency during Li deposition/stripping inherent in these batteries have prevented their practical applications over the past 40 years. With the emergence of post-Li-ion batteries, safe and efficient operation of Li metal anodes has become an enabling technology which may determine the fate of several promising candidates for the next generation energy storage systems, including rechargeable Li–air batteries, Li–S batteries, and Li metal batteries which utilize intercalation compounds as cathodes. In this paper, various factors that affect the morphology and Coulombic efficiency of Li metal anodes have been analyzed. Technologies utilized to characterize the morphology of Li deposition and the results obtained by modelling of Li dendrite growth have also been reviewed. Finally, recent development and urgent need in this field are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,697
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Cited by
Items 301–359 of 359
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Self-citationStrong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Exploring the Impact of Mechanical Pressure on the Performance of Anode-Free Lithium Metal Cells
Louli, A. J., Genovese, M., Weber, R., Hames, S. G., Logan, E. R., & Dahn, J. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0091908jes · Cited by 282
Why Bis(fluorosulfonyl)imide Is a “Magic Anion” for Electrochemistry
Shkrob, I. A., Marin, T. W., Zhu, Y., & Abraham, D. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506567p · Cited by 281
McCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes
Yu, Z., Cui, Y., & Bao, Z. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100119 · Cited by 280
Ahmad, Z., Xie, T., Maheshwari, C., Grossman, J. C., & Viswanathan, V. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00229 · Cited by 279
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Li, N., Yin, Y., Li, J., Zhang, C., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600400 · Cited by 273
Temperature‐Dependent Nucleation and Growth of Dendrite‐Free Lithium Metal Anodes
Yan, K., Wang, J., Zhao, S., Zhou, D., Sun, B., Cui, Y., & Wang, G. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201905251 · Cited by 273
Self-citationNucleation and Growth Mechanism of Lithium Metal Electroplating
Thirumalraj, B., Hagos, T. T., Huang, C.-J., Teshager, M. A., Cheng, J.-H., Su, W.-N., & Hwang, B.-J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10195 · Cited by 273
Cui, C., Yang, C., Eidson, N., Chen, J., Han, F., Chen, L., Luo, C., Wang, P., Fan, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.201906427 · Cited by 272
Wu, Y., Hu, Q., Liang, H., Wang, A., Xu, H., Wang, L., & He, X. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300259 · Cited by 270
Rechargeable Batteries: Grasping for the Limits of Chemistry
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081514jes · Cited by 270
Liu, Z., Cui, T., Pulletikurthi, G., Lahiri, A., Carstens, T., Olschewski, M., & Endres, F. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201509364 · Cited by 270
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Liquid K–Na Alloy Anode Enables Dendrite‐Free Potassium Batteries
Xue, L., Gao, H., Zhou, W., Xin, S., Park, K., Li, Y., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201602633 · Cited by 269
High-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes
Yang, Y., Davies, D. M., Yin, Y., Borodin, O., Lee, J. Z., Fang, C., Olguin, M., Zhang, Y., Sablina, E. S., Wang, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.008 · Cited by 268
Self-citationInsights into the deposition chemistry of Li ions in nonaqueous electrolyte for stable Li anodes
Wang, Z., Sun, Z., Li, J., Shi, Y., Sun, C., An, B., Cheng, H.-M., & Li, F. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01017k · Cited by 268
Strategies to anode protection in lithium metal battery: A review
Li, J., Kong, Z., Liu, X., Zheng, B., Fan, Q. H., Garratt, E., Schuelke, T., Wang, K., Xu, H., & Jin, H. (2021) · InfoMat · doi:10.1002/inf2.12189 · Cited by 267
Dynamic spatial progression of isolated lithium during battery operations
Liu, F., Xu, R., Wu, Y., Boyle, D. T., Yang, A., Xu, J., Zhu, Y., Ye, Y., Yu, Z., Zhang, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-04168-w · Cited by 267
Advances and challenges in lithium-air batteries
Tan, P., Jiang, H. R., Zhu, X. B., An, L., Jung, C. Y., Wu, M. C., Shi, L., Shyy, W., & Zhao, T. S. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.054 · Cited by 266
Xu, M., Lei, S., Qi, J., Dou, Q., Liu, L., Lu, Y., Huang, Q., Shi, S., & Yan, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b00959 · Cited by 266
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Self-citationNucleation and Early Stage Growth of Li Electrodeposits
Biswal, P., Stalin, S., Kludze, A., Choudhury, S., & Archer, L. A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03548 · Cited by 265
Ultrafast deposition of faceted lithium polyhedra by outpacing SEI formation
Yuan, X., Liu, B., Mecklenburg, M., & Li, Y. (2023) · Nature · doi:10.1038/s41586-023-06235-w · Cited by 265
Thenuwara, A. C., Shetty, P. P., Kondekar, N., Sandoval, S. E., Cavallaro, K., May, R., Yang, C.-T., Marbella, L. E., Qi, Y., & McDowell, M. T. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01209 · Cited by 264
Rechargeable lithium batteries and beyond: Progress, challenges, and future directions
Amine, K., Kanno, R., & Tzeng, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.62 · Cited by 262
Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes
Bresser, D., Passerini, S., & Scrosati, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02346k · Cited by 261
Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes
Ye, H., Xin, S., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700530 · Cited by 261
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2017) · Joule · doi:10.1016/j.joule.2017.06.002 · Cited by 261
Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201806532 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Lithium Fluoride in Electrolyte for Stable and Safe Lithium‐Metal Batteries
Tan, Y., Lu, G., Zheng, J., Zhou, F., Chen, M., Ma, T., Lu, L., Song, Y., Guan, Y., Wang, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102134 · Cited by 259
Self-citationRecent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries
Zhang, X.-Q., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2018) · Engineering · doi:10.1016/j.eng.2018.10.008 · Cited by 259
Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
Xie, H., Yang, C., Fu, K. (., Yao, Y., Jiang, F., Hitz, E., Liu, B., Wang, S., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703474 · Cited by 258
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Xue, P., Liu, S., Shi, X., Sun, C., Lai, C., Zhou, Y., Sui, D., Chen, Y., & Liang, J. (2018) · Advanced Materials · doi:10.1002/adma.201804165 · Cited by 257
Bridging Interparticle Li+ Conduction in a Soft Ceramic Oxide Electrolyte
Chen, W.-P., Duan, H., Shi, J.-L., Qian, Y., Wan, J., Zhang, X.-D., Sheng, H., Guan, B., Wen, R., Yin, Y.-X., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12965 · Cited by 257
Interactions between Lithium Growths and Nanoporous Ceramic Separators
Bai, P., Guo, J., Wang, M., Kushima, A., Su, L., Li, J., Brushett, F. R., & Bazant, M. Z. (2018) · Joule · doi:10.1016/j.joule.2018.08.018 · Cited by 256
Li, L., Deng, Y., & Chen, G. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.017 · Cited by 256
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Achilles’ Heel of Lithium–Air Batteries: Lithium Carbonate
Zhao, Z., Huang, J., & Peng, Z. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710156 · Cited by 255
Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte
Song, Y., Yang, L., Zhao, W., Wang, Z., Zhao, Y., Wang, Z., Zhao, Q., Liu, H., & Pan, F. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900671 · Cited by 255
Polymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 255
Tang, L., Chen, B., Zhang, Z., Ma, C., Chen, J., Huang, Y., Zhang, F., Dong, Q., Xue, G., Chen, D., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37997-6 · Cited by 255
Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes
Yu, Z., Mackanic, D. G., Michaels, W., Lee, M., Pei, A., Feng, D., Zhang, Q., Tsao, Y., Amanchukwu, C. V., Yan, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.025 · Cited by 253
Electrolyte design implications of ion-pairing in low-temperature Li metal batteries
Holoubek, J., Kim, K., Yin, Y., Wu, Z., Liu, H., Li, M., Chen, A., Gao, H., Cai, G., Pascal, T. A., et al. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03422g · Cited by 241
Shangguan, X., Xu, G., Cui, Z., Wang, Q., Du, X., Chen, K., Huang, S., Jia, G., Li, F., Wang, X., et al. (2019) · Small · doi:10.1002/smll.201900269 · Cited by 194
How Far Away Are Lithium-Sulfur Batteries From Commercialization?
Zhu, K., Wang, C., Chi, Z., Ke, F., Yang, Y., Wang, A., Wang, W., & Miao, L. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00123 · Cited by 181
Perspective—Fluorinating Interphases
Wang, C., Meng, Y. S., & Xu, K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0281903jes · Cited by 173
Lee, H., Lim, H.-S., Ren, X., Yu, L., Engelhard, M. H., Han, K. S., Lee, J., Kim, H.-T., Xiao, J., Liu, J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01819 · Cited by 150
Self-citationLocalized high concentration electrolyte behavior near a lithium–metal anode surface
Zheng, Y., Soto, F. A., Ponce, V., Seminario, J. M., Cao, X., Zhang, J.-G., & Balbuena, P. B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08935g · Cited by 123
Self-citationA Safer, Wide-Temperature Liquefied Gas Electrolyte Based on Difluoromethane
Davies, D. M., Yang, Y., Sablina, E. S., Yin, Y., Mayer, M., Zhang, Y., Olguin, M., Lee, J. Z., Lu, B., Damien, D., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229668 · Cited by 30
Self-citation
Metadata
- Authors
- Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 2
- Pages
- 513-537
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1972767018
- Cited by
- 4,704
- References
- 142
- FWCI
- 54.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.