Cited by 268

The DOI matches its Crossref record; 166 of the 166 references it cites were found in a registry or an index.

Low-temperature carbon-based electrodes in perovskite solar cells

Open access

Bogachuk, Dmitry, Zouhair, Salma, Wojciechowski, Konrad, Yang, Bowen, Babu, Vivek, Wagner, Lukas, Xu, Bo, Lim, Jaekeun, Mastroianni, Simone, Pettersson, Henrik, Hagfeldt, Anders, Hinsch, Andreas·2020·Energy & Environmental Science

DOI 10.1039/d0ee02175j

Open this paper in CoChat — free account

Abstract

This work summarizes recent progress of low-temperature carbon-based electrodes in perovskite photovoltaic devices and their great up-scalability potential.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1039/d0ee02175j

Cites

166 of 166 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Studying disorder in graphite-based systems by Raman spectroscopy
Pimenta, M. A., Dresselhaus, G., Dresselhaus, M. S., Cançado, L. G., Jorio, A., & Saito, R. (2007) · Phys. Chem. Chem. Phys. · doi:10.1039/b613962k · Cited by 4,623
Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Promises and challenges of perovskite solar cells
Correa-Baena, J.-P., Saliba, M., Buonassisi, T., Grätzel, M., Abate, A., Tress, W., & Hagfeldt, A. (2017) · Science · doi:10.1126/science.aam6323 · Cited by 2,221
Self-citation
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citation
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Investigation of CH3NH3PbI3 Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Defects in perovskite-halides and their effects in solar cells
Ball, J. M., & Petrozza, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.149 · Cited by 1,275
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Self-citation
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
All-Inorganic Perovskite Solar Cells
Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10227 · Cited by 1,089
Steric engineering of metal-halide perovskites with tunable optical band gaps
Filip, M. R., Eperon, G. E., Snaith, H. J., & Giustino, F. (2014) · Nature Communications · doi:10.1038/ncomms6757 · Cited by 1,081
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
From graphene to graphite: Electronic structure around theKpoint
Partoens, B., & Peeters, F. M. (2006) · Physical Review B · doi:10.1103/physrevb.74.075404 · Cited by 993
Review Graphite
Chung, D. D. L. (2002) · Journal of Materials Science · doi:10.1023/a:1014915307738 · Cited by 937
High‐Performance Flexible Broadband Photodetector Based on Organolead Halide Perovskite
Hu, X., Zhang, X., Liang, L., Bao, J., Li, S., Yang, W., & Xie, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201402020 · Cited by 931
Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
High‐Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution‐Processed Copper‐Doped Nickel Oxide Hole‐Transporting Layer
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells
Li, S.-S., Tu, K.-H., Lin, C.-C., Chen, C.-W., & Chhowalla, M. (2010) · ACS Nano · doi:10.1021/nn100551j · Cited by 780
Addressing the stability issue of perovskite solar cells for commercial applications
Meng, L., You, J., & Yang, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07255-1 · Cited by 778
Making and Breaking of Lead Halide Perovskites
Manser, J. S., Saidaminov, M. I., Christians, J. A., Bakr, O. M., & Kamat, P. V. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00455 · Cited by 727
Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Self-citation
Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells
Domanski, K., Alharbi, E. A., Hagfeldt, A., Grätzel, M., & Tress, W. (2018) · Nature Energy · doi:10.1038/s41560-017-0060-5 · Cited by 685
Self-citation
White-Light Emission and Structural Distortion in New Corrugated Two-Dimensional Lead Bromide Perovskites
Mao, L., Wu, Y., Stoumpos, C. C., Wasielewski, M. R., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01312 · Cited by 664
Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene
Punetha, V. D., Rana, S., Yoo, H. J., Chaurasia, A., McLeskey, J. T., Ramasamy, M. S., Sahoo, N. G., & Cho, J. W. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.010 · Cited by 656
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Norrman, K., Madsen, M. V., Gevorgyan, S. A., & Krebs, F. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106299g · Cited by 588
CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells
Guerrero, A., You, J., Aranda, C., Kang, Y. S., Garcia-Belmonte, G., Zhou, H., Bisquert, J., & Yang, Y. (2016) · ACS Nano · doi:10.1021/acsnano.5b03687 · Cited by 520
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells
Shi, L., Bucknall, M. P., Young, T. L., Zhang, M., Hu, L., Bing, J., Lee, D. S., Kim, J., Wu, T., Takamure, N., et al. (2020) · Science · doi:10.1126/science.aba2412 · Cited by 488
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures—A Photoelectron Spectroscopy Investigation
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445
Aligned Single‐Crystalline Perovskite Microwire Arrays for High‐Performance Flexible Image Sensors with Long‐Term Stability
Deng, W., Zhang, X., Huang, L., Xu, X., Wang, L., Wang, J., Shang, Q., Lee, S., & Jie, J. (2016) · Advanced Materials · doi:10.1002/adma.201505126 · Cited by 432
Air-Exposure Induced Dopant Redistribution and Energy Level Shifts in Spin-Coated Spiro-MeOTAD Films
Hawash, Z., Ono, L. K., Raga, S. R., Lee, M. V., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm504022q · Cited by 430
Direct Evidence of Ion Diffusion for the Silver‐Electrode‐Induced Thermal Degradation of Inverted Perovskite Solar Cells
Li, J., Dong, Q., Li, N., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602922 · Cited by 422
Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency
Zhu, H., Liu, Y., Eickemeyer, F. T., Pan, L., Ren, D., Ruiz‐Preciado, M. A., Carlsen, B., Yang, B., Dong, X., Wang, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907757 · Cited by 412
Self-citation
A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability
Liu, Z., Qiu, L., Ono, L. K., He, S., Hu, Z., Jiang, M., Tong, G., Wu, Z., Jiang, Y., Son, D.-Y., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0653-2 · Cited by 395
Formation of Surface Defects Dominates Ion Migration in Lead-Halide Perovskites
Meggiolaro, D., Mosconi, E., & De Angelis, F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00247 · Cited by 386
A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells
Wu, S., Chen, R., Zhang, S., Babu, B. H., Yue, Y., Zhu, H., Yang, Z., Chen, C., Chen, W., Huang, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09167-0 · Cited by 380
Outdoor Performance and Stability under Elevated Temperatures and Long‐Term Light Soaking of Triple‐Layer Mesoporous Perovskite Photovoltaics
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Perovskite solar cells: An integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies
Ibn-Mohammed, T., Koh, S. C. L., Reaney, I. M., Acquaye, A., Schileo, G., Mustapha, K. B., & Greenough, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.095 · Cited by 379
Recent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells
Fagiolari, L., & Bella, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02115a · Cited by 355
Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device
Ahmad, W., Khan, J., Niu, G., & Tang, J. (2017) · Solar RRL · doi:10.1002/solr.201700048 · Cited by 350
Solvent Engineering Boosts the Efficiency of Paintable Carbon‐Based Perovskite Solar Cells to Beyond 14%
Chen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502087 · Cited by 348
Encapsulating perovskite solar cells to withstand damp heat and thermal cycling
Cheacharoen, R., Boyd, C. C., Burkhard, G. F., Leijtens, T., Raiford, J. A., Bush, K. A., Bent, S. F., & McGehee, M. D. (2018) · Sustainable Energy & Fuels · doi:10.1039/c8se00250a · Cited by 348
CuGaO2: A Promising Inorganic Hole‐Transporting Material for Highly Efficient and Stable Perovskite Solar Cells
Zhang, H., Wang, H., Chen, W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201604984 · Cited by 335
Mixed 3D–2D Passivation Treatment for Mixed‐Cation Lead Mixed‐Halide Perovskite Solar Cells for Higher Efficiency and Better Stability
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Stable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes
Besleaga, C., Abramiuc, L. E., Stancu, V., Tomulescu, A. G., Sima, M., Trinca, L., Plugaru, N., Pintilie, L., Nemnes, G. A., Iliescu, M., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02375 · Cited by 305
Roll-to-Roll Printing of Perovskite Solar Cells
Dou, B., Whitaker, J. B., Bruening, K., Moore, D. T., Wheeler, L. M., Ryter, J., Breslin, N. J., Berry, J. J., Garner, S. M., Barnes, F. S., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01556 · Cited by 304
Is Cu a stable electrode material in hybrid perovskite solar cells for a 30-year lifetime?
Zhao, J., Zheng, X., Deng, Y., Li, T., Shao, Y., Gruverman, A., Shield, J., & Huang, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02980a · Cited by 303
3D Arrays of 1024‐Pixel Image Sensors based on Lead Halide Perovskite Nanowires
Gu, L., Tavakoli, M. M., Zhang, D., Zhang, Q., Waleed, A., Xiao, Y., Tsui, K., Lin, Y., Liao, L., Wang, J., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601603 · Cited by 300
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
Wei, Z., Yan, K., Chen, H., Yi, Y., Zhang, T., Long, X., Li, J., Zhang, L., Wang, J., & Yang, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01983k · Cited by 299
Efficient screen printed perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO/carbon architecture
Cao, K., Zuo, Z., Cui, J., Shen, Y., Moehl, T., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.009 · Cited by 296
Air-Stable and Solution-Processable Perovskite Photodetectors for Solar-Blind UV and Visible Light
Guo, Y., Liu, C., Tanaka, H., & Nakamura, E. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502717g · Cited by 291
Hole-Conductor-Free, Metal-Electrode-Free TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on a Low-Temperature Carbon Electrode
Zhou, H., Shi, Y., Dong, Q., Zhang, H., Xing, Y., Wang, K., Du, Y., & Ma, T. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5017069 · Cited by 290
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Self-citation
Barrier Design to Prevent Metal-Induced Degradation and Improve Thermal Stability in Perovskite Solar Cells
Boyd, C. C., Cheacharoen, R., Bush, K. A., Prasanna, R., Leijtens, T., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00926 · Cited by 276
Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode
Zhang, F., Yang, X., Cheng, M., Wang, W., & Sun, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.034 · Cited by 270
Roll‐to‐Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells
Galagan, Y., Di Giacomo, F., Gorter, H., Kirchner, G., de Vries, I., Andriessen, R., & Groen, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801935 · Cited by 259
Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface
Wu, Z., Liu, Z., Hu, Z., Hawash, Z., Qiu, L., Jiang, Y., Ono, L. K., & Qi, Y. (2019) · Advanced Materials · doi:10.1002/adma.201804284 · Cited by 256
Self‐Adhesive Macroporous Carbon Electrodes for Efficient and Stable Perovskite Solar Cells
Zhang, H., Xiao, J., Shi, J., Su, H., Luo, Y., Li, D., Wu, H., Cheng, Y., & Meng, Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802985 · Cited by 250
The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells
Zhang, L., Liu, T., Liu, L., Hu, M., Yang, Y., Mei, A., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04647a · Cited by 241
A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability
Priyadarshi, A., Haur, L. J., Murray, P., Fu, D., Kulkarni, S., Xing, G., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02693a · Cited by 241
Boron Doping of Multiwalled Carbon Nanotubes Significantly Enhances Hole Extraction in Carbon-Based Perovskite Solar Cells
Zheng, X., Chen, H., Li, Q., Yang, Y., Wei, Z., Bai, Y., Qiu, Y., Zhou, D., Wong, K. S., & Yang, S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00200 · Cited by 241
Efficiency vs.stability: dopant-free hole transporting materials towards stabilized perovskite solar cells
Rakstys, K., Igci, C., & Nazeeruddin, M. K. (2019) · Chemical Science · doi:10.1039/c9sc01184f · Cited by 241
Progress toward Stable Lead Halide Perovskite Solar Cells
Ono, L. K., Qi, Y., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.07.007 · Cited by 240
Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells
Wei, H., Xiao, J., Yang, Y., Lv, S., Shi, J., Xu, X., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.042 · Cited by 236
Nickel Oxide as Efficient Hole Transport Materials for Perovskite Solar Cells
Yin, X., Guo, Y., Xie, H., Que, W., & Kong, L. B. (2019) · Solar RRL · doi:10.1002/solr.201900001 · Cited by 233
Challenges of the Circular Economy: A Material, Metallurgical, and Product Design Perspective
Reuter, M. A., van Schaik, A., Gutzmer, J., Bartie, N., & Abadías-Llamas, A. (2019) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070218-010057 · Cited by 232
Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells
Liu, Z., Zhu, A., Cai, F., Tao, L., Zhou, Y., Zhao, Z., Chen, Q., Cheng, Y.-B., & Zhou, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01593c · Cited by 228
Pure Formamidinium‐Based Perovskite Light‐Emitting Diodes with High Efficiency and Low Driving Voltage
Meng, L., Yao, E., Hong, Z., Chen, H., Sun, P., Yang, Z., Li, G., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201603826 · Cited by 223
The role of carbon-based materials in enhancing the stability of perovskite solar cells
Hadadian, M., Smått, J.-H., & Correa-Baena, J.-P. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04030g · Cited by 222
A dopant free linear acene derivative as a hole transport material for perovskite pigmented solar cells
Kazim, S., Ramos, F. J., Gao, P., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00599j · Cited by 219
Organic/Inorganic Metal Halide Perovskite Optoelectronic Devices beyond Solar Cells
Sun, J., Wu, J., Tong, X., Lin, F., Wang, Y., & Wang, Z. M. (2018) · Advanced Science · doi:10.1002/advs.201700780 · Cited by 219
A manufacturing cost estimation method with uncertainty analysis and its application to perovskite on glass photovoltaic modules
Chang, N. L., Yi Ho‐Baillie, A. W., Basore, P. A., Young, T. L., Evans, R., & Egan, R. J. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2871 · Cited by 212
Perovskite Solar Cells with Inorganic Electron‐ and Hole‐Transport Layers Exhibiting Long‐Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air
Seo, S., Jeong, S., Bae, C., Park, N., & Shin, H. (2018) · Advanced Materials · doi:10.1002/adma.201801010 · Cited by 211
Impact of work function of back contact of perovskite solar cells without hole transport material analyzed by device simulation
Minemoto, T., & Murata, M. (2014) · Current Applied Physics · doi:10.1016/j.cap.2014.08.002 · Cited by 202
Light-Emitting Electrochemical Cells Based on Hybrid Lead Halide Perovskite Nanoparticles
Aygüler, M. F., Weber, M. D., Puscher, B. M. D., Medina, D. D., Docampo, P., & Costa, R. D. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b02959 · Cited by 202
Enhancement in lifespan of halide perovskite solar cells
Wang, Q., Phung, N., Di Girolamo, D., Vivo, P., & Abate, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02852d · Cited by 193
Degradation Mechanism of Silver Metal Deposited on Lead Halide Perovskites
Svanström, S., Jacobsson, T. J., Boschloo, G., Johansson, E. M. J., Rensmo, H., & Cappel, U. B. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20315 · Cited by 192
An all-carbon counter electrode for highly efficient hole-conductor-free organo-metal perovskite solar cells
Yang, Y., Xiao, J., Wei, H., Zhu, L., Li, D., Luo, Y., Wu, H., & Meng, Q. (2014) · RSC Adv. · doi:10.1039/c4ra09519g · Cited by 191
Enhanced Stability of Perovskite Solar Cells through Corrosion‐Free Pyridine Derivatives in Hole‐Transporting Materials
Yue, Y., Salim, N., Wu, Y., Yang, X., Islam, A., Chen, W., Liu, J., Bi, E., Xie, F., Cai, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602822 · Cited by 186
14.7% efficient mesoscopic perovskite solar cells using single walled carbon nanotubes/carbon composite counter electrodes
Li, H., Cao, K., Cui, J., Liu, S., Qiao, X., Shen, Y., & Wang, M. (2016) · Nanoscale · doi:10.1039/c5nr07347b · Cited by 183
Caesium for Perovskite Solar Cells: An Overview
Bella, F., Renzi, P., Cavallo, C., & Gerbaldi, C. (2018) · Chemistry – A European Journal · doi:10.1002/chem.201801096 · Cited by 176
Recent efficient strategies for improving the moisture stability of perovskite solar cells
Li, F., & Liu, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01325f · Cited by 170
Low-cost high-efficiency system for solar-driven conversion of CO 2 to hydrocarbons
Huan, T. N., Dalla Corte, D. A., Lamaison, S., Karapinar, D., Lutz, L., Menguy, N., Foldyna, M., Turren-Cruz, S.-H., Hagfeldt, A., Bella, F., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1815412116 · Cited by 170
Self-citation
Advances in stability of perovskite solar cells
Wali, Q., Iftikhar, F. J., Khan, M. E., Ullah, A., Iqbal, Y., & Jose, R. (2020) · Organic Electronics · doi:10.1016/j.orgel.2019.105590 · Cited by 170
The effect of graphite and carbon black ratios on conductive ink performance
Phillips, C., Al-Ahmadi, A., Potts, S.-J., Claypole, T., & Deganello, D. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1114-6 · Cited by 169
Carbon Nanotube Based Inverted Flexible Perovskite Solar Cells with All‐Inorganic Charge Contacts
Luo, Q., Ma, H., Hao, F., Hou, Q., Ren, J., Wu, L., Yao, Z., Zhou, Y., Wang, N., Jiang, K., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703068 · Cited by 169
Strategic improvement of the long-term stability of perovskite materials and perovskite solar cells
Xu, T., Chen, L., Guo, Z., & Ma, T. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04553g · Cited by 168
Solvent effect on the hole-conductor-free fully printable perovskite solar cells
Chen, J., Xiong, Y., Rong, Y., Mei, A., Sheng, Y., Jiang, P., Hu, Y., Li, X., & Han, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.047 · Cited by 167
17.46% efficient and highly stable carbon-based planar perovskite solar cells employing Ni-doped rutile TiO2 as electron transport layer
Liu, X., Liu, Z., Sun, B., Tan, X., Ye, H., Tu, Y., Shi, T., Tang, Z., & Liao, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.031 · Cited by 167
Electrical transport in doped multiwalled carbon nanotubes
Liu, K., Avouris, P., Martel, R., & Hsu, W. K. (2001) · Physical review. B, Condensed matter · doi:10.1103/physrevb.63.161404 · Cited by 164
Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates
Troughton, J., Bryant, D., Wojciechowski, K., Carnie, M. J., Snaith, H., Worsley, D. A., & Watson, T. M. (2015) · J. Mater. Chem. A · doi:10.1039/c5ta01755f · Cited by 160
Self-citation
17% efficient printable mesoscopic PIN metal oxide framework perovskite solar cells using cesium-containing triple cation perovskite
Liu, S., Huang, W., Liao, P., Pootrakulchote, N., Li, H., Lu, J., Li, J., Huang, F., Shai, X., Zhao, X., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07660f · Cited by 154
Efficient stable graphene-based perovskite solar cells with high flexibility in device assembling via modular architecture design
Zhang, C., Wang, S., Zhang, H., Feng, Y., Tian, W., Yan, Y., Bian, J., Wang, Y., Jin, S., Zakeeruddin, S. M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02391g · Cited by 153
Barrier Designs in Perovskite Solar Cells for Long‐Term Stability
Zhang, S., Liu, Z., Zhang, W., Jiang, Z., Chen, W., Chen, R., Huang, Y., Yang, Z., Zhang, Y., Han, L., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001610 · Cited by 151
High-performance dopant-free conjugated small molecule-based hole-transport materials for perovskite solar cells
Azmi, R., Nam, S. Y., Sinaga, S., Akbar, Z. A., Lee, C., Yoon, S. C., Jung, I. H., & Jang, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.12.002 · Cited by 142
ITO-free wrap through organic solar cells—A module concept for cost-efficient reel-to-reel production
Zimmermann, B., Glatthaar, M., Niggemann, M., Riede, M., Hinsch, A., & Gombert, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.005 · Cited by 130
Self-citation
Highly Efficient and Stable Perovskite Solar Cells based on a Low‐Cost Carbon Cloth
Gholipour, S., Correa‐Baena, J., Domanski, K., Matsui, T., Steier, L., Giordano, F., Tajabadi, F., Tress, W., Saliba, M., Abate, A., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601116 · Cited by 130
Self-citation
Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature-Processed Perovskite Solar Cells
He, S., Qiu, L., Son, D., Liu, Z., Juarez-Perez, E. J., Ono, L. K., Stecker, C., & Qi, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01294 · Cited by 129
Single‐Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications
Jeon, I., Xiang, R., Shawky, A., Matsuo, Y., & Maruyama, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801312 · Cited by 125
Bias-dependent degradation of various solar cells: lessons for stability of perovskite photovoltaics
Khenkin, M., Anoop, K. M., Katz, E. A., & Visoly‐Fisher, I. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03475c · Cited by 125
Boron and phosphorus co-doped carbon counter electrode for efficient hole-conductor-free perovskite solar cell
Chen, M., Zha, R., Yuan, Z., Jing, Q., Huang, Z., Xing-kun, Y., Yang, S., Zhao, X.-H., Xu, D.-L., & Zou, G. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.050 · Cited by 122
Frustrated Lewis pair-mediated recrystallization of CH 3 NH 3 PbI 3 for improved optoelectronic quality and high voltage planar perovskite solar cells
Jain, S. M., Qiu, Z., Häggman, L., Mirmohades, M., Johansson, M. B., Edvinsson, T., & Boschloo, G. K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02544g · Cited by 121
Large area perovskite solar cell module
Cai, L., Liang, L., Wu, J., Ding, B., Gao, L., & Fan, B. (2017) · Journal of Semiconductors · doi:10.1088/1674-4926/38/1/014006 · Cited by 119
Carbon Materials in Perovskite Solar Cells: Prospects and Future Challenges
Ferguson, V., Silva, S. R. P., & Zhang, W. (2019) · Energy & environment materials · doi:10.1002/eem2.12035 · Cited by 117
100 °C Thermal Stability of Printable Perovskite Solar Cells Using Porous Carbon Counter Electrodes
Baranwal, A. K., Kanaya, S., Peiris, T. A. N., Mizuta, G., Nishina, T., Kanda, H., Miyasaka, T., Segawa, H., & Ito, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600933 · Cited by 116
Oxygen management in carbon electrode for high-performance printable perovskite solar cells
Tian, C., Mei, A., Zhang, S. '., Tian, H., Liu, S., Qin, F., Xiong, Y., Rong, Y., Hu, Y., Zhou, Y., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.050 · Cited by 111
Carbon Nanotube Bridging Method for Hole Transport Layer-Free Paintable Carbon-Based Perovskite Solar Cells
Wang, Y., Zhao, H., Mei, Y., Liu, H., Wang, S., & Li, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18530 · Cited by 108
15% efficient carbon based planar-heterojunction perovskite solar cells using a TiO 2 /SnO 2 bilayer as the electron transport layer
Liu, Z., Sun, B., Liu, X., Han, J., Ye, H., Tu, Y., Chen, C., Shi, T., Tang, Z., & Liao, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00526e · Cited by 104
Spiro[fluorene-9,9′-xanthene]-based hole transporting materials for efficient perovskite solar cells with enhanced stability
Liu, K., Yao, Y., Wang, J., et al. (2016) · Materials Chemistry Frontiers · doi:10.1039/c6qm00097e · Cited by 101
Efficient triple-mesoscopic perovskite solar mini-modules fabricated with slot-die coating
Xu, M., Ji, W., Sheng, Y., Wu, Y., Cheng, H., Meng, J., Yan, Z., Xu, J., Mei, A., Hu, Y., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104842 · Cited by 96
Perovskite quantum dots encapsulated in electrospun fiber membranes as multifunctional supersensitive sensors for biomolecules, metal ions and pH
Wang, Y., Zhu, Y., Huang, J., Cai, J., Zhu, J., Yang, X., Shen, J., & Li, C. (2017) · Nanoscale Horizons · doi:10.1039/c7nh00057j · Cited by 93
Non-precious transition metals as counter electrode of perovskite solar cells
Wang, L., Li, G., Zhao, Q., & Gao, X. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.11.007 · Cited by 91
Engineering of hole-selective contact for low temperature-processed carbon counter electrode-based perovskite solar cells
Zhang, F., Yang, X., Cheng, M., Li, J., Wang, W., Wang, H., & Sun, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07507f · Cited by 89
Side‐Chain Engineering on Dopant‐Free Hole‐Transporting Polymers toward Highly Efficient Perovskite Solar Cells (20.19%)
Zhang, L., Liu, C., Wang, X., Tian, Y., Jen, A. K. ‐., & Xu, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904856 · Cited by 88
Self-citation
An amorphous precursor route to the conformable oriented crystallization of CH 3 NH 3 PbBr 3 in mesoporous scaffolds: toward efficient and thermally stable carbon-based perovskite solar cells
Chen, H., Zheng, X., Li, Q., Yang, Y., Xiao, S., Hu, C., Bai, Y., Zhang, T., Wong, K. S., & Yang, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06115j · Cited by 84
Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode
Chu, Q., Ding, B., Qiu, Q., Liu, Y., Li, C., Li, C., Yang, G., & Fang, B. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10871k · Cited by 83
Post-healing of defects: an alternative way for passivation of carbon-based mesoscopic perovskite solar cells via hydrophobic ligand coordination
Huang, G., Wang, C., Zhang, H., Xu, S., Xu, Q., & Cui, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09646a · Cited by 81
Metal Dissipation and Inefficient Recycling Intensify Climate Forcing
Ciacci, L., Harper, E. M., Nassar, N. T., Reck, B. K., & Graedel, T. E. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02714 · Cited by 78
Effective Improvement of the Photovoltaic Performance of Carbon-Based Perovskite Solar Cells by Additional Solvents
Zhang, C., Luo, Y., Chen, X., Chen, Y., Sun, Z., & Huang, S. M. (2016) · Nano-Micro Letters · doi:10.1007/s40820-016-0094-4 · Cited by 77
Bio-inspired Carbon Hole Transporting Layer Derived from Aloe Vera Plant for Cost-Effective Fully Printable Mesoscopic Carbon Perovskite Solar Cells
Mali, S. S., Kim, H., Patil, J. V., & Hong, C. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08383 · Cited by 73
In situ growth of perovskite stacking layers for high-efficiency carbon-based hole conductor free perovskite solar cells
Liu, J., Zhou, Q., Thein, N. K. K., Tian, L., Jia, D., Johansson, E. M. J., & Zhang, X. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02772f · Cited by 70
Electroluminescence from Organometallic Lead Halide Perovskite‐Conjugated Polymer Diodes
Sadhanala, A., Kumar, A., Pathak, S. K., Rao, A., Steiner, U., Greenham, N. C., Snaith, H. J., & Friend, R. H. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500008 · Cited by 68
Contact Engineering: Electrode Materials for Highly Efficient and Stable Perovskite Solar Cells
Xiao, J., Shi, C., Zhou, C., et al. (2017) · Solar RRL · doi:10.1002/solr.201700082 · Cited by 67
Self-assembled propylammonium cations at grain boundaries and the film surface to improve the efficiency and stability of perovskite solar cells
Fei, C., Zhou, M. R., Ogle, J., Smilgies, D., Whittaker‐Brooks, L., & Wang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta01755k · Cited by 58
A low-temperature carbon electrode with good perovskite compatibility and high flexibility in carbon based perovskite solar cells
Wang, S., Jiang, P., Shen, W., Mei, A., Xiong, S., Jiang, X., Rong, Y., Tang, Y., Hu, Y., & Han, H. (2019) · Chemical Communications · doi:10.1039/c8cc09905g · Cited by 50
Revealing the Mechanism of Doping of spiro-MeOTAD via Zn Complexation in the Absence of Oxygen and Light
Saygılı, Y., Kim, H., Yang, B., Suo, J., Muñoz-García, A. B., Pavone, M., & Hagfeldt, A. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00319 · Cited by 49
Self-citation
Enhanced moisture stability of cesium lead iodide perovskite solar cells – a first-principles molecular dynamics study
Busipalli, D. L., Lin, K., Nachimuthu, S., & Jiang, J. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp06341b · Cited by 44
Reverse Manufacturing Enables Perovskite Photovoltaics to Reach the Carbon Footprint Limit of a Glass Substrate
Wagner, L., Mastroianni, S., & Hinsch, A. (2020) · Joule · doi:10.1016/j.joule.2020.02.001 · Cited by 39
Self-citation
Easy Strategy to Enhance Thermal Stability of Planar PSCs by Perovskite Defect Passivation and Low-Temperature Carbon-Based Electrode
Calabrò, E., Matteocci, F., Paci, B., Cinà, L., Vesce, L., Barichello, J., Generosi, A., Reale, A., & Carlo, A. D. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05878 · Cited by 39
Interfacial Post‐Treatment for Enhancing the Performance of Printable Carbon‐Based Perovskite Solar Cells
Liu, T., Wang, Z., Lou, L., Xiao, S., Zheng, S., & Yang, S. (2019) · Solar RRL · doi:10.1002/solr.201900278 · Cited by 32
In situ transfer of CH 3 NH 3 PbI 3 single crystals in mesoporous scaffolds for efficient perovskite solar cells
Guan, Y., Xu, M., Zhang, W., Li, D., Hou, X., Li, H., Wang, Q., Zhang, Z., Mei, A., Chen, M., et al. (2019) · Chemical Science · doi:10.1039/c9sc04900b · Cited by 30
Double-Mesoscopic Hole-Transport-Material-Free Perovskite Solar Cells: Overcoming Charge-Transport Limitation by Sputtered Ultrathin Al2O3 Isolating Layer
Mathiazhagan, G., Wagner, L., Bogati, S., Ünal, K. Y., Bogachuk, D., Kroyer, T., Mastroianni, S., & Hinsch, A. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b02563 · Cited by 29
Self-citation
Revisiting Surface Modification of Graphite: Dual‐Layer Coating for High‐Performance Lithium Battery Anode Materials
Song, G., Ryu, J., Ko, S., Bang, B. M., Choi, S., Shin, M., Lee, S., & Park, S. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600249 · Cited by 27
Surface modification of natural vein graphite for the anode application in Li-ion rechargeable batteries
Amaraweera, T. H. N. G., Balasooriya, N. W. B., Wijayasinghe, H. W. M. A. C., Attanayake, A. N. B., Mellander, B. ‐., & Dissanayake, M. A. K. L. (2018) · Ionics · doi:10.1007/s11581-018-2523-5 · Cited by 17
Counter Electrode Materials for Organic-Inorganic Perovskite Solar Cells
Liu, Z., & He, H. (2019) · Springer eBooks · doi:10.1007/978-3-662-59594-7_7 · Cited by 6

Perovskite solar cells
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304

See all 268

Authors: Bogachuk, D., Zouhair, S., Wojciechowski, K., Yang, B., Babu, V., Wagner, L., Xu, B., Lim, J., Mastroianni, S., Pettersson, H., Hagfeldt, A., & Hinsch, A.
Venue: Energy & Environmental Science
Publisher: Royal Society of Chemistry (RSC)
Published: 2020
Volume: 13
Issue: 11
Pages: 3880-3916
ISSN: 1754-5692 (ISSN-L)
1754-5706
DOI: 10.1039/d0ee02175j
OpenAlex: W3084278585
Cited by: 268
References: 166
FWCI: 12.07
Type: journal article
Language: en
Open access: hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Low-temperature carbon-based electrodes in perovskite solar cells

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources