Interface engineering toward stable lithium–sulfur batteries

Challenges for Rechargeable Li Batteries

Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries

Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988

The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase Model

Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899

Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries

Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130

Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism

Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107

Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746

Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries

Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644

Transition of lithium growth mechanisms in liquid electrolytes

Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591

Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy

Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540

On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries

Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design

Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391

An Artificial Solid Electrolyte Interphase with High Li‐Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990

Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries

Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987

Dendritic growth mechanisms in lithium/polymer cells

Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945

Cryo-STEM mapping of solid–liquid interfaces and dendrites in lithium-metal batteries

Zachman, M. J., Tu, Z., Choudhury, S., Archer, L. A., & Kourkoutis, L. F. (2018) · Nature · doi:10.1038/s41586-018-0397-3 · Cited by 823

Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition

Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816

Lithium-Sulfur Batteries: Attaining the Critical Metrics

Bhargav, A., He, J., Gupta, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.01.001 · Cited by 719

High-Capacity Micrometer-Sized Li2S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries

Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718

Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries

Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711

Interfaces in Solid-State Lithium Batteries

Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702

III. On the concentration at the electrodes in a solution, with special reference to the liberation of hydrogen by electrolysis of a mixture of copper sulphate and sulphuric acid

Sand, H. J. S. (1901) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440109462590 · Cited by 665

New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy

Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653

Regulation methods for the Zn/electrolyte interphase and the effectiveness evaluation in aqueous Zn-ion batteries

Yuan, L., Hao, J., Kao, C.-C., Wu, C., Liu, H.-K., Dou, S.-X., & Qiao, S.-Z. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02021h · Cited by 628

Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries

Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626

A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries

Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583

Visualizing interfacial collective reaction behaviour of Li–S batteries

Zhou, S., Shi, J., Liu, S., Li, G., Pei, F., Chen, Y., Deng, J., Zheng, Q., Li, J., Zhao, C., et al. (2023) · Nature · doi:10.1038/s41586-023-06326-8 · Cited by 577

Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy

Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548

Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry

Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548

Electrolyte solutions design for lithium-sulfur batteries

Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534

Towards high-performance solid-state Li–S batteries: from fundamental understanding to engineering design

Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520

Anodes for Rechargeable Lithium‐Sulfur Batteries

Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502

A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte

Yamaki, J.-I., Tobishima, S.-I., Hayashi, K., Saito, K., Nemoto, Y., & Arakawa, M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00067-6 · Cited by 483

The Electrochemical Decomposition of Propylene Carbonate on Graphite

Dey, A. N., & Sullivan, B. P. (1970) · Journal of The Electrochemical Society · doi:10.1149/1.2407470 · Cited by 479

Making Li-metal electrodes rechargeable by controlling the dendrite growth direction

Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464

A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries

Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442

Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries

Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438

Selective electroreduction of carbon dioxide to methanol on copper selenide nanocatalysts

Yang, D., Zhu, Q., Chen, C., Liu, H., Liu, Z., Zhao, Z., Zhang, X., Liu, S., & Han, B. (2019) · Nature Communications · doi:10.1038/s41467-019-08653-9 · Cited by 432

Bidirectional Catalysts for Liquid–Solid Redox Conversion in Lithium–Sulfur Batteries

Wang, R., Luo, C., Wang, T., Zhou, G., Deng, Y., He, Y., Zhang, Q., Kang, F., Lv, W., & Yang, Q. (2020) · Advanced Materials · doi:10.1002/adma.202000315 · Cited by 423

A Comprehensive Understanding of Lithium–Sulfur Battery Technology

Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422

Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium–sulfur batteries

Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414

Towards High Performance Li–S Batteries via Sulfonate‐Rich COF‐Modified Separator

Xu, J., An, S., Song, X., Cao, Y., Wang, N., Qiu, X., Zhang, Y., Chen, J., Duan, X., Huang, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105178 · Cited by 414

New Insights on the Structure of Electrochemically Deposited Lithium Metal and Its Solid Electrolyte Interphases via Cryogenic TEM

Wang, X., Zhang, M., Alvarado, J., Wang, S., Sina, M., Lu, B., Bouwer, J., Xu, W., Xiao, J., Zhang, J.-G., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03606 · Cited by 409

Onset of dendritic growth in lithium/polymer cells

Rosso, M., Gobron, T., Brissot, C., Chazalviel, J.-N., & Lascaud, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00734-0 · Cited by 404

Non-encapsulation approach for high-performance Li–S batteries through controlled nucleation and growth

Pan, H., Chen, J., Cao, R., Murugesan, V., Rajput, N. N., Han, K. S., Persson, K., Estevez, L., Engelhard, M. H., Zhang, J.-G., et al. (2017) · Nature Energy · doi:10.1038/s41560-017-0005-z · Cited by 402

High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator

Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393

Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery

Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386

Two-dimensional molecular brush-functionalized porous bilayer composite separators toward ultrastable high-current density lithium metal anodes

Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384

A lithium anode protection guided highly-stable lithium–sulfur battery

Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382

Inhibition of Polysulfide Shuttles in Li–S Batteries: Modified Separators and Solid‐State Electrolytes

Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373

In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes

Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371

Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance

Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369

P‐Doped NiTe2 with Te‐Vacancies in Lithium–Sulfur Batteries Prevents Shuttling and Promotes Polysulfide Conversion

Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358

Ultrahigh Performance All Solid-State Lithium Sulfur Batteries: Salt Anion’s Chemistry-Induced Anomalous Synergistic Effect

Eshetu, G. G., Judez, X., Li, C., Martinez-Ibañez, M., Gracia, I., Bondarchuk, O., Carrasco, J., Rodriguez-Martinez, L. M., Zhang, H., & Armand, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04612 · Cited by 351

Stabilizing Solid Electrolyte-Anode Interface in Li-Metal Batteries by Boron Nitride-Based Nanocomposite Coating

Cheng, Q., Li, A., Li, N., Li, S., Zangiabadi, A., Li, T.-D., Huang, W., Li, A. C., Jin, T., Song, Q., et al. (2019) · Joule · doi:10.1016/j.joule.2019.03.022 · Cited by 350

Tungsten Disulfide Catalysts Supported on a Carbon Cloth Interlayer for High Performance Li–S Battery

Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348

Anion‐Sorbent Composite Separators for High‐Rate Lithium‐Ion Batteries

Zhang, C., Shen, L., Shen, J., Liu, F., Chen, G., Tao, R., Ma, S., Peng, Y., & Lu, Y. (2019) · Advanced Materials · doi:10.1002/adma.201808338 · Cited by 341

Lithium Diffusion Mechanism through Solid–Electrolyte Interphase in Rechargeable Lithium Batteries

Ramasubramanian, A., Yurkiv, V., Foroozan, T., Ragone, M., Shahbazian-Yassar, R., & Mashayek, F. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b00436 · Cited by 340

A High Energy Lithium‐Sulfur Battery with Ultrahigh‐Loading Lithium Polysulfide Cathode and its Failure Mechanism

Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321

Lightweight Metallic MgB2 Mediates Polysulfide Redox and Promises High-Energy-Density Lithium-Sulfur Batteries

Pang, Q., Kwok, C. Y., Kundu, D., Liang, X., & Nazar, L. F. (2019) · Joule · doi:10.1016/j.joule.2018.09.024 · Cited by 317

An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal

Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315

Carbon@titanium nitride dual shell nanospheres as multi-functional hosts for lithium sulfur batteries

Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312

Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries

Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311

Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium–Sulfur Batteries

Zhao, C.-X., Li, X.-Y., Zhao, M., Chen, Z.-X., Song, Y.-W., Chen, W.-J., Liu, J.-N., Wang, B., Zhang, X.-Q., Chen, C.-M., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c09107 · Cited by 307

Challenges in Accommodating Volume Change of Si Anodes for Li‐Ion Batteries

Ko, M., Chae, S., & Cho, J. (2015) · ChemElectroChem · doi:10.1002/celc.201500254 · Cited by 305

Review on areal capacities and long-term cycling performances of lithium sulfur battery at high sulfur loading

Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301

A flame-retardant polymer electrolyte for high performance lithium metal batteries with an expanded operation temperature

Xiang, J., Zhang, Y., Zhang, B., Yuan, L., Liu, X., Cheng, Z., Yang, Y., Zhang, X., Li, Z., Shen, Y., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00049g · Cited by 301

A microporous–mesoporous carbon with graphitic structure for a high-rate stable sulfur cathode in carbonate solvent-based Li–S batteries

Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296

Simultaneously Inhibiting Lithium Dendrites Growth and Polysulfides Shuttle by a Flexible MOF‐Based Membrane in Li–S Batteries

He, Y., Chang, Z., Wu, S., Qiao, Y., Bai, S., Jiang, K., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802130 · Cited by 295

Engineering Oxygen Vacancies in a Polysulfide‐Blocking Layer with Enhanced Catalytic Ability

Li, Z., Zhou, C., Hua, J., Hong, X., Sun, C., Li, H., Xu, X., & Mai, L. (2020) · Advanced Materials · doi:10.1002/adma.201907444 · Cited by 292

Carbon-free and binder-free Li-Al alloy anode enabling an all-solid-state Li-S battery with high energy and stability

Pan, H., Zhang, M., Cheng, Z., Jiang, H., Yang, J., Wang, P., He, P., & Zhou, H. S. (2022) · Science Advances · doi:10.1126/sciadv.abn4372 · Cited by 289

Progress and Perspective of Solid‐State Lithium–Sulfur Batteries

Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282

Designing a Quinone-Based Redox Mediator to Facilitate Li2S Oxidation in Li-S Batteries

Tsao, Y., Lee, M., Miller, E. C., Gao, G., Park, J., Chen, S., Katsumata, T., Tran, H., Wang, L.-W., Toney, M. F., et al. (2019) · Joule · doi:10.1016/j.joule.2018.12.018 · Cited by 277

Artificial dual solid-electrolyte interfaces based on in situ organothiol transformation in lithium sulfur battery

Guo, W., Zhang, W., Si, Y., Wang, D., Fu, Y., & Manthiram, A. (2021) · Nature Communications · doi:10.1038/s41467-021-23155-3 · Cited by 268

Incombustible Polymer Electrolyte Boosting Safety of Solid‐State Lithium Batteries: A Review

Han, L., Wang, L., Chen, Z., Kan, Y., Hu, Y., Zhang, H., & He, X. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300892 · Cited by 262

Slurryless Li2S/Reduced Graphene Oxide Cathode Paper for High-Performance Lithium Sulfur Battery

Wang, C., Wang, X., Yang, Y., Kushima, A., Chen, J., Huang, Y., & Li, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00112 · Cited by 261

Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries

Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201806532 · Cited by 261

Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode

Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260

Lithium metal protection through in-situ formed solid electrolyte interphase in lithium-sulfur batteries: The role of polysulfides on lithium anode

Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255

Fluoroethylene Carbonate as Electrolyte Additive in Tetraethylene Glycol Dimethyl Ether Based Electrolytes for Application in Lithium Ion and Lithium Metal Batteries

Heine, J., Hilbig, P., Qi, X., Niehoff, P., Winter, M., & Bieker, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0011507jes · Cited by 246

A Brief Review on Solid Electrolyte Interphase Composition Characterization Technology for Lithium Metal Batteries: Challenges and Perspectives

Shan, X., Zhong, Y., Zhang, L., Zhang, Y., Xia, X., Wang, X., & Tu, J. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c06277 · Cited by 246

The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries

Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245

Lithium-sulfur batteries: Problems and solutions

Kolosnitsyn, V. S., & Karaseva, E. V. (2008) · Russian Journal of Electrochemistry · doi:10.1134/s1023193508050029 · Cited by 244

Interfacial Study on Solid Electrolyte Interphase at Li Metal Anode: Implication for Li Dendrite Growth

Liu, Z., Qi, Y., Lin, Y. X., Chen, L., Lu, P., & Chen, L. Q. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0151605jes · Cited by 243

In Situ Formation of Protective Coatings on Sulfur Cathodes in Lithium Batteries with LiFSI‐Based Organic Electrolytes

Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240

Reaction Mechanism Optimization of Solid‐State Li–S Batteries with a PEO‐Based Electrolyte

Fang, R., Xu, H., Xu, B., Li, X., Li, Y., & Goodenough, J. B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202001812 · Cited by 240

Manipulating Redox Kinetics of Sulfur Species Using Mott–Schottky Electrocatalysts for Advanced Lithium–Sulfur Batteries

Li, Y., Wang, W., Zhang, B., Fu, L., Wan, M., Li, G., Cai, Z., Tu, S., Duan, X., Seh, Z. W., et al. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c02161 · Cited by 235

Suppressing Self‐Discharge and Shuttle Effect of Lithium–Sulfur Batteries with V2O5‐Decorated Carbon Nanofiber Interlayer

Liu, M., Li, Q., Qin, X., Liang, G., Han, W., Zhou, D., He, Y., Li, B., & Kang, F. (2017) · Small · doi:10.1002/smll.201602539 · Cited by 233

Progress of the Interface Design in All‐Solid‐State Li–S Batteries

Yue, J., Yan, M., Yin, Y., & Guo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707533 · Cited by 230

Long lifespan lithium metal anodes enabled by Al2O3 sputter coating

Wang, L., Zhang, L., Wang, Q., Li, W., Wu, B., Jia, W., Wang, Y., Li, J., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.001 · Cited by 229

In Situ Chemical Imaging of Solid-Electrolyte Interphase Layer Evolution in Li–S Batteries

Nandasiri, M. I., Camacho-Forero, L. E., Schwarz, A. M., Shutthanandan, V., Thevuthasan, S., Balbuena, P. B., Mueller, K. T., & Murugesan, V. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00374 · Cited by 218

Towards stable lithium-sulfur batteries: Mechanistic insights into electrolyte decomposition on lithium metal anode

Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216

Ultralight Layer‐by‐Layer Self‐Assembled MoS 2 ‐Polymer Modified Separator for Simultaneously Trapping Polysulfides and Suppressing Lithium Dendrites

Wu, J., Zeng, H., Li, X., Xiao, X. H., Liao, Y., Xue, Z., Ye, Y., & Xie, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802430 · Cited by 213

Two Birds with One Stone: Interfacial Engineering of Multifunctional Janus Separator for Lithium–Sulfur Batteries

Li, Y., Gao, T., Ni, D., Zhou, Y., Yousaf, M., Guo, Z., Zhou, J., Zhou, P., Wang, Q., & Guo, S. (2022) · Advanced Materials · doi:10.1002/adma.202107638 · Cited by 211

Phosphorus Vacancies as Effective Polysulfide Promoter for High‐Energy‐Density Lithium–Sulfur Batteries

Sun, R., Bai, Y., Bai, Z., Peng, L., Luo, M., Qu, M., Gao, Y., Wang, Z., Sun, W., & Sun, K. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102739 · Cited by 210

Electrode–Electrolyte Interfaces in Lithium–Sulfur Batteries with Liquid or Inorganic Solid Electrolytes

Yu, X., & Manthiram, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00460 · Cited by 209

Enhanced Catalytic Conversion of Polysulfides Using Bimetallic Co7Fe3 for High-Performance Lithium–Sulfur Batteries

Zeng, P., Liu, C., Zhao, X., Yuan, C., Chen, Y., Lin, H., & Zhang, L. (2020) · ACS Nano · doi:10.1021/acsnano.0c04054 · Cited by 208

Realizing high-capacity all-solid-state lithium-sulfur batteries using a low-density inorganic solid-state electrolyte

Wang, D., Jhang, L.-J., Kou, R., Liao, M., Zheng, S., Jiang, H., Shi, P., Li, G.-X., Meng, K., & Wang, D. (2023) · Nature Communications · doi:10.1038/s41467-023-37564-z · Cited by 201

Elucidating the Catalytic Activity of Oxygen Deficiency in the Polysulfide Conversion Reactions of Lithium–Sulfur Batteries

Lin, H., Zhang, S., Zhang, T., Ye, H., Yao, Q., Zheng, G. W., & Lee, J. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801868 · Cited by 199

Solid-state lithium–sulfur batteries: Advances, challenges and perspectives

Ding, B., Wang, J., Fan, Z., Chen, S., Lin, Q., Lu, X., Dou, H., Kumar Nanjundan, A., Yushin, G., Zhang, X., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.05.020 · Cited by 197

Nano-TiO2 decorated carbon coating on the separator to physically and chemically suppress the shuttle effect for lithium-sulfur battery

Shao, H., Wang, W., Zhang, H., Wang, A., Chen, X., & Huang, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.067 · Cited by 192

3D CoSe@C Aerogel as a Host for Dendrite‐Free Lithium‐Metal Anode and Efficient Sulfur Cathode in Li–S Full Cells

He, J., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002654 · Cited by 192

Electrolyte Structure of Lithium Polysulfides with Anti‐Reductive Solvent Shells for Practical Lithium–Sulfur Batteries

Zhang, X., Jin, Q., Nan, Y., Hou, L., Li, B., Chen, X., Jin, Z., Zhang, X., Huang, J., & Zhang, Q. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202103470 · Cited by 190

Ultrahigh-Volumetric-Energy-Density Lithium–Sulfur Batteries with Lean Electrolyte Enabled by Cobalt-Doped MoSe2/Ti3C2Tx MXene Bifunctional Catalyst

Wang, W., Huai, L., Wu, S., Shan, J., Zhu, J., Liu, Z., Yue, L., & Li, Y. (2021) · ACS Nano · doi:10.1021/acsnano.1c02047 · Cited by 189

Anode-free, Lean-Electrolyte Lithium-Sulfur Batteries Enabled by Tellurium-Stabilized Lithium Deposition

Nanda, S., Bhargav, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.03.020 · Cited by 188

Lithium/Sulfur Batteries Upon Cycling: Structural Modifications and Species Quantification by In Situ and Operando X‐Ray Diffraction Spectroscopy

Waluś, S., Barchasz, C., Bouchet, R., Leprêtre, J., Colin, J., Martin, J., Elkaïm, E., Baehtz, C., & Alloin, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500165 · Cited by 184

Shielding Polysulfide Intermediates by an Organosulfur‐Containing Solid Electrolyte Interphase on the Lithium Anode in Lithium–Sulfur Batteries

Wei, J., Zhang, X., Hou, L., Shi, P., Li, B., Xiao, Y., Yan, C., Yuan, H., & Huang, J. (2020) · Advanced Materials · doi:10.1002/adma.202003012 · Cited by 184

An encapsulating lithium-polysulfide electrolyte for practical lithium–sulfur batteries

Hou, L., Zhang, X., Yao, N., Chen, X., Li, B., Shi, P., Jin, C., Huang, J., & Zhang, Q. (2022) · Chem · doi:10.1016/j.chempr.2021.12.023 · Cited by 184

Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium–Sulfur Batteries

Li, G., Huang, Q., He, X., Gao, Y., Wang, D., Kim, S. H., & Wang, D. (2018) · ACS Nano · doi:10.1021/acsnano.7b08035 · Cited by 178

Cryogenic Electron Microscopy for Characterizing and Diagnosing Batteries

Wang, X., Li, Y., & Meng, Y. S. (2018) · Joule · doi:10.1016/j.joule.2018.10.005 · Cited by 178

Elucidating the Solvation Structure and Dynamics of Lithium Polysulfides Resulting from Competitive Salt and Solvent Interactions

Rajput, N. N., Murugesan, V., Shin, Y., Han, K. S., Lau, K. C., Chen, J., Liu, J., Curtiss, L. A., Mueller, K. T., & Persson, K. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00068 · Cited by 173

Synergetic effect of spatially separated dual co-catalyst for accelerating multiple conversion reaction in advanced lithium sulfur batteries

Zhao, Z., Yi, Z., Li, H., Pathak, R., Yang, Z., Wang, X., & Qiao, Q. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105621 · Cited by 167

Unraveling the Dual Functionality of High‐Donor‐Number Anion in Lean‐Electrolyte Lithium‐Sulfur Batteries

Chu, H., Jung, J., Noh, H., Yuk, S., Lee, J., Lee, J., Baek, J., Roh, Y., Kwon, H., Choi, D., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000493 · Cited by 166

Lithium phosphorus oxynitride as an efficient protective layer on lithium metal anodes for advanced lithium-sulfur batteries

Wang, W., Yue, X., Meng, J., Wang, J., Wang, X., Chen, H., Shi, D., Fu, J., Zhou, Y., Chen, J., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.08.010 · Cited by 159

Designer Anion Enabling Solid-State Lithium-Sulfur Batteries

Zhang, H., Oteo, U., Judez, X., Eshetu, G. G., Martinez-Ibañez, M., Carrasco, J., Li, C., & Armand, M. (2019) · Joule · doi:10.1016/j.joule.2019.05.003 · Cited by 158

In Situ-Formed Li2S in Lithiated Graphite Electrodes for Lithium–Sulfur Batteries

Fu, Y., Zu, C., & Manthiram, A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409705u · Cited by 155

Interface Engineering Toward Expedited Li 2 S Deposition in Lithium–Sulfur Batteries: A Critical Review

Sun, J., Liu, Y., Liu, L., Bi, J., Wang, S., Du, Z., Du, H., Wang, K., Ai, W., & Huang, W. (2023) · Advanced Materials · doi:10.1002/adma.202211168 · Cited by 154

Mechanistic understanding of Li dendrites growth by in- situ/operando imaging techniques

Foroozan, T., Sharifi‐Asl, S., & Shahbazian‐Yassar, R. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228135 · Cited by 152

Sulfurized polyacrylonitrile for high-performance lithium sulfur batteries: advances and prospects

Zhao, X., Wang, C., Li, Z., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta03300j · Cited by 152

Toward High Performance Lithium–Sulfur Batteries Based on Li2S Cathodes and Beyond: Status, Challenges, and Perspectives

Su, D., Zhou, D., Wang, C., & Wang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800154 · Cited by 150

Interfacial design for lithium–sulfur batteries: From liquid to solid

Yan, M., Wang, W., Yin, Y., Wan, L., & Guo, Y. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100002 · Cited by 147

Improved interfacial electronic contacts powering high sulfur utilization in all-solid-state lithium–sulfur batteries

Hou, L., Yuan, H., Zhao, C., Xu, L., Zhu, G., Nan, H., Cheng, X., Liu, Q., He, C., Huang, J., et al. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.09.037 · Cited by 145

Deciphering the Reaction Mechanism of Lithium–Sulfur Batteries by In Situ/Operando Synchrotron‐Based Characterization Techniques

Yan, Y., Cheng, C., Zhang, L., Li, Y., & Lu, J. B. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900148 · Cited by 144

3D Ferroconcrete‐Like Aminated Carbon Nanotubes Network Anchoring Sulfur for Advanced Lithium–Sulfur Battery

Yan, M., Chen, H., Yu, Y., Zhao, H., Li, C.-F., Hu, Z., Wu, P., Chen, L., Wang, H., Peng, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801066 · Cited by 140

Lithium degradation in lithium–sulfur batteries: insights into inventory depletion and interphasial evolution with cycling

Nanda, S., & Manthiram, A. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01074j · Cited by 140

Understanding Electrochemical Reaction Mechanisms of Sulfur in All‐Solid‐State Batteries through Operando and Theoretical Studies **

Cao, D., Sun, X. H., Li, F., Bak, S., Ji, T., Geiwitz, M., Burch, K. S., Du, Y., Yang, G., & Zhu, H. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202302363 · Cited by 136

A Review of Solid-State Lithium–Sulfur Battery: Ion Transport and Polysulfide Chemistry

Pan, H., Cheng, Z., He, P., & Zhou, H. S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02647 · Cited by 135

Boosting Polysulfide Redox Kinetics by Graphene‐Supported Ni Nanoparticles with Carbon Coating

(2020) · doi:10.1002/aenm.202000907 · Cited by 132

Full Dissolution of the Whole Lithium Sulfide Family (Li 2 S 8 to Li 2 S) in a Safe Eutectic Solvent for Rechargeable Lithium–Sulfur Batteries

Cheng, Q., Xu, W., Qin, S., Das, S., Jin, T., Li, A., Li, A. C., Qie, B., Yao, P., Zhai, H., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812611 · Cited by 130

Solidifying Cathode–Electrolyte Interface for Lithium–Sulfur Batteries

Wang, W., Zhang, J., Chou, J., Yin, Y., You, Y., Xin, S., & Guo, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000791 · Cited by 130

Marrying Ester Group with Lithium Salt: Cellulose‐Acetate‐Enabled LiF‐Enriched Interface for Stable Lithium Metal Anodes

Chen, M., Zheng, J., Liu, Y., Sheng, O., Ju, Z., Lu, G., Liu, T., Wang, Y., Nai, J., Wang, Q., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102228 · Cited by 130

High Power Nanocomposite TiS2 Cathodes for All-Solid-State Lithium Batteries

Trevey, J. E., Stoldt, C. R., & Lee, S.-H. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.017112jes · Cited by 129

Long-life and high-areal-capacity lithium-sulfur batteries realized by a honeycomb-like N, P dual-doped carbon modified separator

Zeng, P., Huang, L., Zhang, X., Zhang, R., Wu, L., & Chen, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.096 · Cited by 128

High-capacity lithium sulfur battery and beyond: a review of metal anode protection layers and perspective of solid-state electrolytes

Wang, Y., Sahadeo, E., Rubloff, G. W., Lin, C., & Lee, S. B. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-3093-7 · Cited by 126

A Nickel‐Decorated Carbon Flower/Sulfur Cathode for Lean‐Electrolyte Lithium–Sulfur Batteries

Tsao, Y., Gong, H., Chen, S., Chen, G., Liu, Y., Gao, T. Z., Cui, Y., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101449 · Cited by 114

Interwoven V 2 O 5 nanowire/graphene nanoscroll hybrid assembled as efficient polysulfide-trapping-conversion interlayer for long-life lithium–sulfur batteries

Guo, Y. F., Zhang, Y., Zhang, Y., Xiang, M., Wu, H., Liu, H., & Dou, S. X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06610h · Cited by 106

Thermodynamics and Kinetics of the Cathode–Electrolyte Interface in All-Solid-State Li–S Batteries

Chandrappa, M. L. H., Qi, J., Chen, C., Banerjee, S., & Ong, S. P. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c07482 · Cited by 106

Mechanism Investigation of High-Performance Li–Polysulfide Batteries Enabled by Tungsten Disulfide Nanopetals

Huang, S., Wang, Y., Hu, J., Lim, Y. V., Kong, D., Zheng, Y., Ding, M., Pam, M. E., & Yang, H. Y. (2018) · ACS Nano · doi:10.1021/acsnano.8b04857 · Cited by 104

Novel Li[(CF3SO2)(n-C4F9SO2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance

Ma, Q., Qi, X., Tong, B., Zheng, Y., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10597 · Cited by 103

Stepped Channels Integrated Lithium–Sulfur Separator via Photoinduced Multidimensional Fabrication of Metal–Organic Frameworks

Gao, G., Wang, Y., Wang, S., Yang, R., Chen, Y., Zhang, Y., Jiang, C., Wei, M., Ma, H., & Lan, Y. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202016608 · Cited by 101

Confining Sulfur in Porous Carbon by Vapor Deposition to Achieve High-Performance Cathode for All-Solid-State Lithium–Sulfur Batteries

Alzahrani, A. S., Otaki, M., Wang, D., Gao, Y., Arthur, T. S., Liu, S., & Wang, D. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01956 · Cited by 100

Effective Trapping of Lithium Polysulfides Using a Functionalized Carbon Nanotube-Coated Separator for Lithium–Sulfur Cells with Enhanced Cycling Stability

Ponraj, R., Kannan, A. G., Ahn, J. H., Lee, J. H., Kang, J., Han, B., & Kim, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10641 · Cited by 99

Kinetics Tuning the Electrochemistry of Lithium Dendrites Formation in Lithium Batteries through Electrolytes

Tao, R., Bi, X., Shu, L., Yao, Y., Wu, F., Wang, Q., Zhang, C., & Lu, J. B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13859 · Cited by 98

Anionic Effect on Enhancing the Stability of a Solid Electrolyte Interphase Film for Lithium Deposition on Graphite

Yang, G., Zhang, S., Weng, S., Li, X., Wang, X., Wang, Z., & Chen, L. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c01436 · Cited by 97

Ultrathin dendrimer–graphene oxide composite film for stable cycling lithium–sulfur batteries

Liu, W., Jiang, J., Yang, K., Mi, Y., Kumaravadivel, P., Zhong, Y., Fan, Q., Weng, Z., Wu, Z., Cha, J. J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620809114 · Cited by 96

Ultra-fast and accurate binding energy prediction of shuttle effect-suppressive sulfur hosts for lithium-sulfur batteries using machine learning

Zhang, H., Wang, Z., Ren, J., Liu, J., & Li, J. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.11.009 · Cited by 93

Synergistic Interfacial Bonding in Reduced Graphene Oxide Fiber Cathodes Containing Polypyrrole@sulfur Nanospheres for Flexible Energy Storage

Huang, L., Guan, T., Su, H., Zhong, Y., Cao, F., Zhang, Y., Xia, X., Wang, X., Bao, N., & Tu, J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202212151 · Cited by 91

Diagnosing and Correcting the Failure of the Solid‐State Polymer Electrolyte for Enhancing Solid‐State Lithium–Sulfur Batteries

Meng, X., Liu, Y., Ma, Y., Boyjoo, Y., Liu, J., Qiu, J., & Wang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202212039 · Cited by 91

Boron- and nitrogen-doped reduced graphene oxide coated separators for high-performance Li-S batteries

Han, P., & Manthiram, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.10.005 · Cited by 89

A review on design of cathode, anode and solid electrolyte for true all-solid-state lithium sulfur batteries

Bandyopadhyay, S., & Nandan, B. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101201 · Cited by 87

In Situ TEM Observations of Discharging/Charging of Solid‐State Lithium‐Sulfur Batteries at High Temperatures

Wang, Z., Tang, Y., Zhang, L., Li, M., Shan, Z., & Huang, J. (2020) · Small · doi:10.1002/smll.202001899 · Cited by 81

Li2S‐ or S‐Based Lithium‐Ion Batteries

Li, M., Chen, Z., Wu, T., & Lu, J. B. (2018) · Advanced Materials · doi:10.1002/adma.201801190 · Cited by 80

Stabilization of garnet/Li interphase by diluting the electronic conductor

Feng, W., Hu, J., Qian, G., Xu, Z., Zan, G., Liu, Y., Wang, F., Wang, C., & Xia, Y. (2022) · Science Advances · doi:10.1126/sciadv.add8972 · Cited by 75

CoNiO2/Co4N Heterostructure Nanowires Assisted Polysulfide Reaction Kinetics for Improved Lithium–Sulfur Batteries

Pu, J., Gong, W., Shen, Z., Wang, L., Yao, Y., & Hong, G. (2021) · Advanced Science · doi:10.1002/advs.202104375 · Cited by 71

Creating Effective Nanoreactors on Carbon Nanotubes with Mechanochemical Treatments for High‐Areal‐Capacity Sulfur Cathodes and Lithium Anodes

Yang, G. Q., Tan, J., Jin, H., Kim, Y. H., Yang, X., Son, D. H., Ahn, S.-J., Zhou, H.-C. “., & Yu, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800595 · Cited by 68

Strong Interfacial Adhesion between the Li2S Cathode and a Functional Li7P2.9Ce0.2S10.9Cl0.3 Solid-State Electrolyte Endowed Long-Term Cycle Stability to All-Solid-State Lithium–Sulfur Batteries

Zhou, L., Tufail, M. K., Ahmad, N., Song, T., Chen, R., & Yang, W. J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06328 · Cited by 67

Packing Sulfur Species by Phosphorene‐Derived Catalytic Interface for Electrolyte‐Lean Lithium–Sulfur Batteries

Zhou, J., Wu, T., Pan, Y., Zhu, J., Chen, X., Peng, C., Shu, C., Kong, L., Tang, W., & Chou, S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106966 · Cited by 67

Elucidating Interfacial Phenomena between Solid-State Electrolytes and the Sulfur-Cathode of Lithium–Sulfur Batteries

Camacho-Forero, L. E., & Balbuena, P. B. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03880 · Cited by 65

Surface/Interface Structure and Chemistry of Lithium–Sulfur Batteries: From Density Functional Theory Calculations’ Perspective

Shen, J., Wang, Z., Xu, X., Liu, Z., Zhang, D., Li, F., Li, Y., Zeng, L., & Liu, J. (2021) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202100007 · Cited by 65

Assessment of critical materials and cell design factors for high performance lithium-sulfur batteries using machine learning

Kilic, A., Odabaşı, Ç., Yıldırım, R., & Eroğlu, D. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124117 · Cited by 62

A robust, highly stretchable ion-conducive skin for stable lithium metal batteries

Zhou, Z.-X., Feng, Y., Wang, J., Liang, B., Li, Y.-H., Song, Z.-X., Itkis, D., & Song, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125254 · Cited by 58

Machine Learning Derived Blueprint for Rational Design of the Effective Single-Atom Cathode Catalyst of the Lithium–Sulfur Battery

Lian, Z., Yang, M., Jan, F., & Li, B. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c00927 · Cited by 54

Enhanced polysulfide conversion catalysis in lithium-sulfur batteries with surface cleaning electrolyte additives

Ye, H., Sun, J., Zhang, S., Zhang, T., Zhao, Y. L., Song, C., Yao, Q., & Lee, J. Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128284 · Cited by 53

Multifunctional interlayer with simultaneously capturing and catalytically converting polysulfides for boosting safety and performance of lithium-sulfur batteries at high-low temperatures

Chen, X.-S., Gao, Y., Zhu, G., Chen, H., Chen, S., Wang, X., Wu, G., & Wang, Y. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.041 · Cited by 50

Prospect of Sulfurized Pyrolyzed Poly(acrylonitrile) (S@pPAN) Cathode Materials for Rechargeable Lithium Batteries

Yang, H., Chen, J., Yang, J., & Wang, J. (2019) · Angewandte Chemie · doi:10.1002/ange.201913540 · Cited by 49

Machine-Learning-Enabled Tricks of the Trade for Rapid Host Material Discovery in Li–S Battery

Zhang, H., Wang, Z., Cai, J., Wu, S., & Li, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c10749 · Cited by 47

Impact of Anionic Structure of Lithium Salt on the Cycling Stability of Lithium-Metal Anode in Li-S Batteries

Ma, Q., Tong, B., Fang, Z., Qi, X., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1301608jes · Cited by 45

Protecting lithium anode with LiNO3/Al2O3/PVDF-coated separator for lithium-sulfur batteries

Guan, Y., Wang, A., Liu, S., Li, Q., Wang, W., & Huang, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.235 · Cited by 44

Electrochemical processes in all-solid-state Li-S batteries studied by electrochemical impedance spectroscopy

Fan, B., Guan, Z., Wang, H., et al. (2021) · Solid State Ionics · doi:10.1016/j.ssi.2021.115680 · Cited by 43

Interfacial challenges in all-solid-state lithium batteries

Huang, Y., Shao, B., & Han, F. (2022) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2021.100933 · Cited by 41

Compositions and Formation Mechanisms of Solid-Electrolyte Interphase on Microporous Carbon/Sulfur Cathodes

Wang, L., Lin, Y., DeCarlo, S., Wang, Y., Leung, K., Qi, Y., Xu, K., Wang, C., & Eichhorn, B. W. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b05027 · Cited by 39

All‐Solid‐State Li–S Batteries Enhanced by Interface Stabilization and Reaction Kinetics Promotion through 2D Transition Metal Sulfides

Sun, X. H., Cao, D., Wang, Y., Ji, T., Liang, W., & Zhu, H. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202200539 · Cited by 31

Combining in situ electrochemistry, operando FTIR and post-mortem analyses to understand Co-Mn-Al spinels on mitigating shuttle effect in lithium-sulfur battery

Santos, É. A., Anchieta, C. G., Fernandes, R. C., Cárdenas, M. J. P., Miranda, A. N., Galantini, I., Maia, F. C. B., Doubek, G., RODELLA, C. B., da Silva, L. M., et al. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108809 · Cited by 31

A Li-Li2S4 battery with improved discharge capacity and cycle life at low electrolyte/sulfur ratios

Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.029 · Cited by 30

High Capacity Li2S–Li2O–LiI Positive Electrodes with Nanoscale Ion‐Conduction Pathways for All‐Solid‐State Li/S Batteries

Fujita, Y., Sakuda, A., Hasegawa, Y., Deguchi, M., Motohashi, K., Ding, J., Tsukasaki, H., Mori, S., Tatsumisago, M., & Hayashi, A. (2023) · Small · doi:10.1002/smll.202302179 · Cited by 30

Ion Sieve Membrane: Homogenizing Li+ Flux and Restricting Polysulfides Migration Enables Long Life and Highly Stable Li-S Battery

Diao, W., Xie, D., Li, D.-L., Tao, F., Liu, C., Sun, H., Zhang, X., Li, W., Wu, X., & Zhang, J. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.07.079 · Cited by 28

Optimization on transport of charge carriers in cathode of sulfide electrolyte-based solid-state lithium-sulfur batteries

Zhang, Z., Wang, Y., Liu, T., Li, G., Ma, J., Zhang, J.-J., Han, P., Dong, S., Yan, X., Tang, Y. F., et al. (2023) · Nano Research · doi:10.1007/s12274-022-5291-5 · Cited by 20

LiAlO2-Modified Li Negative Electrode with Li10GeP2S12 Electrolytes for Stable All-Solid-State Lithium Batteries

Chang, X., Weng, W., Li, M., Wu, M., Chen, G. Z., Fow, K. L., & Yao, X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c03242 · Cited by 17

Graphene-nanoscroll-based Integrated and self-standing electrode with a sandwich structure for lithium sulfur batteries

Guo, Y. F., Zhang, Y., Sun, Y., Zhang, Y., & Wu, H. (2019) · Inorganic Chemistry Frontiers · doi:10.1039/c9qi01344j · Cited by 11