The DOI matches its Crossref record; 129 of the 129 references it cites were found in a registry or an index.
Review of surface defect detection of steel products based on machine vision
Open accessAbstract
Steel plays an important role in industry, and the surface defect detection for steel products based on machine vision has been widely used during the last two decades. This paper attempts to review state‐of‐art of vision‐based surface defect inspection technology of steel products by investigating about 170 publications. This review covers the overall aspects of vision‐based surface defect inspection for steel products including hardware system, automated vision‐based inspection method, existing problems and latest development. The types of steel product surface defects composition of visual inspection system are briefly described, and image acquisition system is introduced as well. The image processing algorithms for surface defect detection of steel products are reviewed, including image pre‐processing, region of interest (ROI) detection, image segmentation for ROI, feature extraction and selection and defect classification. The important problems such as small sample and real time of steel surface defect detection are discussed. Finally, the challenge and development trend of steel surface defect detection are prospected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks
Ren, S., He, K., Girshick, R., & Sun, J. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2577031 · Cited by 73,472
You Only Look Once: Unified, Real-Time Object Detection
Redmon, J., Divvala, S., Girshick, R., & Farhadi, A. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.91 · Cited by 53,803
Rich Feature Hierarchies for Accurate Object Detection and Semantic Segmentation
Girshick, R., Donahue, J., Darrell, T., & Malik, J. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2014.81 · Cited by 32,684
A Computational Approach to Edge Detection
Canny, J. (1986) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.1986.4767851 · Cited by 30,004
End-to-End Object Detection with Transformers
Carion, N., Massa, F., Synnaeve, G., Usunier, N., Kirillov, A., & Zagoruyko, S. (2020) · Lecture Notes in Computer Science · doi:10.1007/978-3-030-58452-8_13 · Cited by 18,285
End-to-End Object Detection with Transformers
Carion, N., Massa, F., Synnaeve, G., Usunier, N., Kirillov, A., & Zagoruyko, S. (2020) · arXiv · doi:10.48550/arxiv.2005.12872 · Cited by 18,253
Advances in Neural Information Processing Systems 29
Teymur, O., Zygalakis, K., & Calderhead, B. (2016) · Cited by 13,886
Fully convolutional networks for semantic segmentation
Shelhamer, E., Long, J., & Darrell, T. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2572683 · Cited by 11,898
Least Squares Support Vector Machine Classifiers
Suykens, J. A. K., & Vandewalle, J. (1999) · Neural Processing Letters · doi:10.1023/a:1018628609742 · Cited by 9,362
Visual pattern recognition by moment invariants
Hu, M.-K. (1962) · IEEE Transactions on Information Theory · doi:10.1109/tit.1962.1057692 · Cited by 7,546
The contourlet transform: an efficient directional multiresolution image representation
Do, M. N., & Vetterli, M. (2005) · IEEE Transactions on Image Processing · doi:10.1109/tip.2005.859376 · Cited by 3,952
A new method for gray-level picture thresholding using the entropy of the histogram
Kapur, J. N., Sahoo, P. K., & Wong, A. K. C. (1985) · Computer Vision, Graphics, and Image Processing · doi:10.1016/0734-189x(85)90125-2 · Cited by 3,658
A Completed Modeling of Local Binary Pattern Operator for Texture Classification
Guo, Z., Zhang, L., & Zhang, D. (2010) · IEEE Transactions on Image Processing · doi:10.1109/tip.2010.2044957 · Cited by 2,115
Twin Support Vector Machines for Pattern Classification
Jayadeva, Khemchandani, R., & Chandra, S. (2007) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2007.1068 · Cited by 1,803
Lin, C.-F., & Wang, S.-D. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991432 · Cited by 1,494
An End-to-End Steel Surface Defect Detection Approach via Fusing Multiple Hierarchical Features
He, Y., Song, K., Meng, Q., & Yan, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2915404 · Cited by 1,341
Song, K., & Yan, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.09.002 · Cited by 1,026
A new criterion for automatic multilevel thresholding
Yen, J.-C., Chang, F.-J., & Chang, S. (1995) · IEEE Transactions on Image Processing · doi:10.1109/83.366472 · Cited by 933
Sparse geometric image representations with bandelets
Le Pennec, E., & Mallat, S. (2005) · IEEE Transactions on Image Processing · doi:10.1109/tip.2005.843753 · Cited by 860
A Survey of Automated Visual Inspection
Newman, T. S., & Jain, A. K. (1995) · Computer Vision and Image Understanding · doi:10.1006/cviu.1995.1017 · Cited by 619
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
A Review of Recent Advances in Surface Defect Detection using Texture analysis Techniques
Xie, X. (2008) · ELCVIA Electronic Letters on Computer Vision and Image Analysis · doi:10.5565/rev/elcvia.268 · Cited by 500
Automatic Metallic Surface Defect Detection and Recognition with Convolutional Neural Networks
Tao, X., Zhang, D., Ma, W., Liu, X., & Xu, D. (2018) · Applied Sciences · doi:10.3390/app8091575 · Cited by 471
Visual-Based Defect Detection and Classification Approaches for Industrial Applications—A SURVEY
Czimmermann, T., Ciuti, G., Milazzo, M., Chiurazzi, M., Roccella, S., Oddo, C. M., & Dario, P. (2020) · Sensors · doi:10.3390/s20051459 · Cited by 441
Real-time detection of steel strip surface defects based on improved yolo detection network
Li, J., Su, Z., Geng, J., & Yin, Y. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.09.412 · Cited by 371
Review of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
Automatic Defect Detection on Hot-Rolled Flat Steel Products
Ghorai, S., Mukherjee, A., Gangadaran, M., & Dutta, P. K. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2218677 · Cited by 317
Synthetic data augmentation for surface defect detection and classification using deep learning
Jain, S., Seth, G., Paruthi, A., Soni, U., & Kumar, G. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01710-x · Cited by 302
A Real-Time Visual Inspection System for Discrete Surface Defects of Rail Heads
Li, Q., & Ren, S. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2184959 · Cited by 299
Surface defect classification of steels with a new semi-supervised learning method
Di, H., Ke, X., Peng, Z., & Dongdong, Z. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.01.011 · Cited by 241
Zhang, H., Jin, X., Wu, Q. M. J., Wang, Y., He, Z., & Yang, Y. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2803830 · Cited by 192
A semi-supervised convolutional neural network-based method for steel surface defect recognition
Gao, Y., Gao, L., Li, X., & Yan, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101825 · Cited by 189
Generalized Completed Local Binary Patterns for Time-Efficient Steel Surface Defect Classification
Luo, Q., Sun, Y., Li, P., Simpson, O., Tian, L., & He, Y. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2852918 · Cited by 178
An End‐to‐End Steel Strip Surface Defects Recognition System Based on Convolutional Neural Networks
Yi, L., Li, G., & Jiang, M. (2017) · steel research international · doi:10.1002/srin.201600068 · Cited by 173
He, Y., Song, K., Dong, H., & Yan, Y. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.06.020 · Cited by 171
Automated Visual Defect Classification for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Su, J., Zhou, J., Zhou, B., Yang, C., Liu, L., Gui, W., & Tian, L. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3030167 · Cited by 148
Filter-based feature selection for rail defect detection
Mandriota, C., Nitti, M., Ancona, N., Stella, E., & Distante, A. (2004) · Machine Vision and Applications · doi:10.1007/s00138-004-0148-3 · Cited by 134
Tetrolet transform: A new adaptive Haar wavelet algorithm for sparse image representation
Krommweh, J. (2010) · Journal of Visual Communication and Image Representation · doi:10.1016/j.jvcir.2010.02.011 · Cited by 130
Semi-supervised learning with GAN for automatic defect detection from images
Zhang, G., Pan, Y., & Zhang, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103764 · Cited by 124
Image acquisition techniques for automatic visual inspection of metallic surfaces
Pernkopf, F., & O'Leary, P. (2003) · NDT & E International · doi:10.1016/s0963-8695(03)00081-1 · Cited by 117
Detection of surface defects on raw steel blocks using Bayesian network classifiers
Pernkopf, F. (2004) · Pattern Analysis and Applications · doi:10.1007/s10044-004-0232-3 · Cited by 113
Research Progress of Visual Inspection Technology of Steel Products—A Review
Sun, X., Gu, J., Tang, S., & Li, J. (2018) · Applied Sciences · doi:10.3390/app8112195 · Cited by 109
Cohn, R., & Holm, E. A. (2021) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-021-00205-8 · Cited by 107
Martins, L. A. O., Padua, F. L. C., & Almeida, P. E. M. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675519 · Cited by 101
Improved Sobel algorithm for defect detection of rail surfaces with enhanced efficiency and accuracy
Shi, T., Kong, J.-Y., Wang, X.-D., Liu, Z., & Zheng, G. (2016) · Journal of Central South University · doi:10.1007/s11771-016-3350-3 · Cited by 94
Zhang, S., Zhang, Q., Gu, J., Su, L., Li, K., & PECHT, M. G. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107541 · Cited by 94
Hu, H., Liu, Y., Liu, M., & Nie, L. (2016) · Neurocomputing · doi:10.1016/j.neucom.2015.05.134 · Cited by 93
An automatic assessment scheme for steel quality inspection
Wiltschi, K., Pinz, A., & Lindeberg, T. (2000) · Machine Vision and Applications · doi:10.1007/s001380050130 · Cited by 89
Luo, Q., Fang, X., Sun, Y., Liu, L., Ai, J., Yang, C., & Simpson, O. (2019) · IEEE Access · doi:10.1109/access.2019.2898215 · Cited by 75
One-Shot Recognition of Manufacturing Defects in Steel Surfaces
Deshpande, A. M., Minai, A. A., & Kumar, M. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.05.146 · Cited by 73
Enhanced Faster Region Convolutional Neural Networks for Steel Surface Defect Detection
Wei, R., Song, Y., & Zhang, Y. (2020) · ISIJ International · doi:10.2355/isijinternational.isijint-2019-335 · Cited by 72
Classification of defects in steel strip surface based on multiclass support vector machine
Hu, H., Li, Y., Liu, M., & Liang, W. (2014) · Multimedia Tools and Applications · doi:10.1007/s11042-012-1248-0 · Cited by 68
Segmentation of rust defects on painted steel surfaces by intelligent image analysis
Vorobel, R., Ivasenko, I. B., Berehulyak, O., & Mandziy, T. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103515 · Cited by 67
Application of RNAMlet to surface defect identification of steels
Xu, K., Xu, Y., Zhou, P., & Wang, L. (2018) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2018.01.010 · Cited by 66
Steel Surface Defect Detection Using Texture Segmentation Based on Multifractal Dimension
Yazdchi, M., Yazdi, M., & Mahyari, A. G. (2009) · 2009 International Conference on Digital Image Processing · doi:10.1109/icdip.2009.68 · Cited by 65
Wang, Y., Xia, H., Yuan, X., Li, L., & Sun, B. (2018) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5238-0 · Cited by 61
Defect Detection of Steel Surfaces with Global Adaptive Percentile Thresholding of Gradient Image
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2017) · Journal of The Institution of Engineers (India): Series B · doi:10.1007/s40031-017-0296-2 · Cited by 61
Real-time vision-based defect inspection for high-speed steel products
Yun, J. P., Choi, S., Seo, B., & Kim, S. W. (2008) · Optical Engineering · doi:10.1117/1.2957958 · Cited by 59
Steel Surface Defect Detection Using GAN and One-Class Classifier
Liu, K., Li, A., Wen, X., Chen, H., & Yang, P. (2019) · International Conference on Automation and Computing (ICAC) · doi:10.23919/iconac.2019.8895110 · Cited by 58
A Generic Semi-Supervised Deep Learning-Based Approach for Automated Surface Inspection
Zheng, X., Wang, H., Chen, J., Kong, Y., & Zheng, S. (2020) · IEEE Access · doi:10.1109/access.2020.3003588 · Cited by 58
Detection of steel defect using the image processing algorithms
Sharifzadeh, M., Alirezaee, S., Amirfattahi, R., & Sadri, S. (2008) · IEEE International Multitopic Conference (INMIC) · doi:10.1109/inmic.2008.4777721 · Cited by 56
Application of Shearlet transform to classification of surface defects for metals
Xu, K., Liu, S., & Ai, Y. (2015) · Image and Vision Computing · doi:10.1016/j.imavis.2015.01.001 · Cited by 55
Liu, M., Liu, Y., Hu, H., & Nie, L. (2016) · Journal of Visual Communication and Image Representation · doi:10.1016/j.jvcir.2015.04.005 · Cited by 55
A local annular contrast based real-time inspection algorithm for steel bar surface defects
Li, W.-B., Lu, C.-H., & Zhang, J.-C. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.03.007 · Cited by 54
Agarwal, K., Shivpuri, R., Zhu, Y., Chang, T.-S., & Huang, H. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.12.026 · Cited by 54
Defect inspection system for steel wire rods produced by hot rolling process
Yun, J. P., Choi, D.-C., Jeon, Y.-J., Park, C., & Kim, S. W. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5397-8 · Cited by 50
Vision-based surface defect inspection for thick steel plates
Yun, J. P., Kim, D., Kim, K., Lee, S. J., Park, C. H., & Kim, S. W. (2017) · Optical Engineering · doi:10.1117/1.oe.56.5.053108 · Cited by 47
CORD, A., BACH, F., & JEULIN, D. (2010) · Journal of Microscopy · doi:10.1111/j.1365-2818.2010.03365.x · Cited by 45
Chu, M., Liu, X., Gong, R., & Liu, L. (2018) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2018.03.014 · Cited by 45
Defect detection of steel surface using entropy segmentation
Nand, G. K., Noopur, & Neogi, N. (2014) · 2014 Annual IEEE India Conference (INDICON) · doi:10.1109/indicon.2014.7030439 · Cited by 44
Steel Surface Defects Detection and Classification Using SIFT and Voting Strategy
Suvdaa, B., Ahn, J., & Ko, J. (2013) · Cited by 44
Huang, Z. R., Wu, J., & Xie, F. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.130271 · Cited by 42
Song, K.-C., Hu, S.-P., Yan, Y.-H., & Li, J. (2014) · ISIJ International · doi:10.2355/isijinternational.54.2598 · Cited by 41
Deep Learning-Based Defect Detection System in Steel Sheet Surfaces
Amin, D., & Akhter, S. (2020) · 2020 IEEE Region 10 Symposium (TENSYMP) · doi:10.1109/tensymp50017.2020.9230863 · Cited by 41
Application of multi-scale feature extraction to surface defect classification of hot-rolled steels
Xu, K., Ai, Y.-H., & Wu, X.-Y. (2013) · International Journal of Minerals, Metallurgy, and Materials · doi:10.1007/s12613-013-0690-y · Cited by 40
Yazdchi, M. R., Mahyari, A. G., & Nazeri, A. (2008) · 2008 International Conference on Computational Intelligence for Modelling Control & Automation · doi:10.1109/cimca.2008.130 · Cited by 39
Surface Inspection System of Steel Strip Based on Machine Vision
Tang, B., Kong, J., Wang, X., & Chen, L. (2009) · Database Technology and Applications · doi:10.1109/dbta.2009.133 · Cited by 39
Self-citationHe, D., Xu, K., & Wang, D. (2019) · Image and Vision Computing · doi:10.1016/j.imavis.2019.06.008 · Cited by 38
Design of online surface inspection system of hot rolled strips
Wu, G., Kwak, H., Jang, S., Xu, K., & Xu, J. (2008) · 2008 IEEE International Conference on Automation and Logistics · doi:10.1109/ical.2008.4636548 · Cited by 38
Huang, Z. R., Wu, J., & Xie, F. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.129707 · Cited by 37
Chu, M., & Gong, R. (2015) · ISIJ International · doi:10.2355/isijinternational.isijint-2015-201 · Cited by 34
Real-Time Defects Detection Algorithm For High-Speed Steel Bar In Coil
Choi, S. H., Yun, J. P., Seo, B., Park, Y., & Kim, S. (2007) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1333681 · Cited by 34
Chen, K., Zeng, Z., & Yang, J. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102523 · Cited by 34
Cascading Convolutional Neural Network for Steel Surface Defect Detection
Lin, C., Chen, C., Yang, C., Akhyar, F., Hsu, C.-Y., & Ng, H. (2019) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-20454-9_20 · Cited by 31
Saeedi, J., Dotta, M., Galli, A., Nasciuti, A., Maradia, U., Boccadoro, M., Gambardella, L. M., & Giusti, A. (2020) · Machine Vision and Applications · doi:10.1007/s00138-020-01142-w · Cited by 31
Feature extraction algorithm based on adaptive wavelet packet for surface defect classification
Lee, C. S., Choi, C.-H., Choi, J. Y., Kim, Y. K., & Choi, S. H. (2002) · Proceedings of 3rd IEEE International Conference on Image Processing · doi:10.1109/icip.1996.560968 · Cited by 30
Development of Defect Classification Algorithm for POSCO Rolling Strip Surface Inspection System
Choi, K., Koo, K., & Lee, J. (2006) · 2006 SICE-ICASE International Joint Conference · doi:10.1109/sice.2006.314681 · Cited by 30
Chu, M., Wang, A., Gong, R., & Sha, M. (2014) · ISIJ International · doi:10.2355/isijinternational.54.1638 · Cited by 26
Feature extraction based on contourlet transform and its application to surface inspection of metals
Ai, Y., & Xu, K. (2012) · Optical Engineering · doi:10.1117/1.oe.51.11.113605 · Cited by 25
Liu, W., & Yan, Y. (2014) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2014.061995 · Cited by 23
A simulation-based few samples learning method for surface defect segmentation
Wei, T., Cao, D., Zheng, C., & Yang, Q. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.06.090 · Cited by 21
The cold rolling strip surface defect on-line inspection system based on machine vision
Zhao, J., Yang, Y., & Li, G. (2010) · Pacific-Asia Conference on Circuits, Communications and Systems · doi:10.1109/paccs.2010.5626924 · Cited by 20
Surface Defect Recognition of Hot-rolled Steel Plates Based on Tetrolet Transform
Xu, K. (2016) · Journal of Mechanical Engineering · doi:10.3901/jme.2016.04.013 · Cited by 20
A Surface Inspection Machine Vision System that Includes Fractal Texture Analysis.
Blackledge, J. (2009) · Dublin Institute of Technology · doi:10.21427/d7qs5j · Cited by 18
A Fast Detection Method for Region of Defect on Strip Steel Surface
Gong, R., Chu, M., Wang, A., & Yang, Y. (2015) · ISIJ International · doi:10.2355/isijinternational.55.207 · Cited by 18
Financial Big Data Based on Internet of Things and Wireless Network Communication
Xue, L. (2021) · Wireless Communications and Mobile Computing · doi:10.1155/2021/8944618 · Cited by 17
Application of Hidden Markov Tree Model to On-line Detection of Surface Defects for Steel Strips
XU, K. (2013) · Journal of Mechanical Engineering · doi:10.3901/jme.2013.22.034 · Cited by 16
Defects Detection of Billet Surface Using Optimized Gabor Filters
Yun, J. P., Choi, S. H., Seo, B., Park, C. H., & Kim, S. W. (2008) · IFAC Proceedings Volumes · doi:10.3182/20080706-5-kr-1001.00012 · Cited by 16
Modeling and recognition of steel-plate surface defects based on a new backward boosting algorithm
Hu, L., Zhou, M., Xiang, F., & Feng, Q. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1113-4 · Cited by 16
Zaghdoudi, R., Séridi, H., Boudiaf, A., & Ziani, S. (2020) · International Conference on Advanced Aspects of Software Engineering (ICAASE) · doi:10.1109/icaase51408.2020.9380108 · Cited by 16
Wen, X., Song, K., Niu, M., Dong, Z., & Yan, Y. (2016) · Optik · doi:10.1016/j.ijleo.2016.11.050 · Cited by 15
Steel surface defect classification using multi-resolution empirical mode decomposition and LBP
Salbiah, S. S., Arof, H., Harun, S. W., Wahab, A. W. A., & Idris, M. Y. I. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/abab21 · Cited by 15
Yun, J. P., Jeon, Y.-J., Choi, D.-C., & Kim, S. W. (2012) · Journal of the Optical Society of America A · doi:10.1364/josaa.29.000797 · Cited by 13
Texture feature extraction of steel strip surface defect based on gray level co-occurrence matrix
Guo, Y., Sun, Z.-J., Sun, H., & Song, X. (2015) · International Conference on Machine Learning and Cybernetics · doi:10.1109/icmlc.2015.7340925 · Cited by 12
Detection of scratch defects for wire rod in steelmaking process
Zhang, J., Kang, D., & Won, S. (2010) · doi:10.1109/iccas.2010.5670210 · Cited by 11
Inspection of metallic surfaces using Local Binary Patterns
Mansano, M. D. R., Pavesi, L., Oliveira, L. S., Britto, A., & Koerich, A. L. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119655 · Cited by 10
Wu, X.-Y., Xu, K., & Xu, J. (2010) · Acta Automatica Sinica · doi:10.3724/sp.j.1004.2010.00438 · Cited by 10
Real-Time Steel Inspection System Based on Support Vector Machine and Multiple Kernel Learning
Chen, Y., Chen, L., Liu, X., Ding, S., & Zhang, H. (2011) · Advances in Intelligent and Soft Computing · doi:10.1007/978-3-642-25658-5_21 · Cited by 9
Self-citationRyu, S.-G., Koo, G., & Kim, S. W. (2020) · ISIJ International · doi:10.2355/isijinternational.isijint-2019-464 · Cited by 9
Zhang, Z., Liu, W., Ostrosi, E., Tian, Y., & Yi, J. (2020) · Engineering Computations · doi:10.1108/ec-11-2019-0502 · Cited by 8
Gong, R., Wu, C., Chu, M., & Liu, X. (2016) · steel research international · doi:10.1002/srin.201600049 · Cited by 7
Recognition of Defects in Steel Surface Image Based on Neural Networks and Morphology
Yang, C., Zhang, J., Ji, G., Fu, Y., & Hong, X. (2007) · Workshop on Digital Media and its Application in Museum & Heritages · doi:10.1109/dmamh.2007.56 · Cited by 7
Cañero-Nieto, J. M., Solano-Martos, J. F., & Martín-Fernández, F. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.07.049 · Cited by 7
Automated visual inspection of flat surface products using feature fusion
Tolba, A. S., Khan, H. A., & Raafat, H. M. (2009) · IEEE International Symposium on Signal Processing and Information Technology (ISSPIT) · doi:10.1109/isspit.2009.5407561 · Cited by 6
Steel surface in-line inspection using machine vision
Liu, H.-W., Lan, Y.-Y., Lee, H.-W., & Liu, D.-K. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2242965 · Cited by 6
Surface Defect Classification of Steels Based on Ensemble of Extreme Learning Machines
Liu, Y., Jin, Y., & Ma, H. (2019) · WRC Symposium on Advanced Robotics and Automation (WRC SARA) · doi:10.1109/wrc-sara.2019.8931807 · Cited by 6
Steel Plate Surface Defect Recognition Method Based on Depth Information
Zhao, C. S., Zhu, H., & Wang, X. (2019) · IEEE Data Driven Control and Learning Systems Conference (DDCLS) · doi:10.1109/ddcls.2019.8908975 · Cited by 5
Steel Strip Defect Detection Based on Human Visual Attention Mechanism Model
Xu, S. H., Guan, S. Q., & Chen, L. L. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.530-531.456 · Cited by 4
Self-citationWinner Trace Marking in Self-Organizing Neural Network for Classification
Wang, Y., Yan, Y., & Wu, Y. (2008) · International Symposium on Computer Science and Computational Technology · doi:10.1109/iscsct.2008.133 · Cited by 4
Steel Strip Surface Defects Detection Based on Mathematical Morphology
Kong, J. (2010) · Gangtie yanjiu xuebao · Cited by 4
Li, L., & Hao, P. (2019) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2019.8834382 · Cited by 4
Review of Vision Real-Time Inspection Algorithm for Rolling Steel Surface Defects
Li, W. B., Lu, C. H., & Zhang, J. C. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.308-310.1328 · Cited by 3
Wei, Y. L., Yan, Y., Li, B., & Cong, J.-H. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.118-120.762 · Cited by 3
Application of Fractal Dimension Feature to Recognition of Surface Defects on Hot-Rolled Strips
Xu, K., Zhou, P., & Yang, C. L. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.152-154.526 · Cited by 3
New approach to classification of surface defects in steel plate based on fuzzy neural networks
Lai, K., Zhang, H., & Dai, D. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.483251 · Cited by 3
Research on defect surface online detection,classification and recognition algorithm for strip steel
Ying-l, H. (2015) · Journal of Optoelectronics·laser · Cited by 3
IPSO based binarization processing in uneven illumination images for billet defect detection
Zhang, B., Liu, X., & Wu, S. (2018) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2018.8398023 · Cited by 3
Classification algorithms of strip surface defects based on PCA-ELM
Miao, F., & Tian, Y. (2020) · Chinese Control Conference (CCC) · doi:10.23919/ccc50068.2020.9189339 · Cited by 3
Defect Detection in Billet Using Plane-Wave and Time-of-Flight Deviation with Transmission Method
Miyamoto, R., Mizutani, K., Wakatsuki, N., & Ebihara, T. (2018) · IEEE International Ultrasonics Symposium · doi:10.1109/ultsym.2018.8579782 · Cited by 2
Metadata
- Authors
- Tang, B., Chen, L., Sun, W., & Lin, Z.
- Venue
- IET Image Processing
- Published
- 2022-10-08
- Volume
- 17
- Issue
- 2
- Pages
- 303-322
- ISSN
- 1751-9659 (ISSN-L)
- 1751-9667
- OpenAlex
- W4303709937
- Cited by
- 271
- References
- 129
- FWCI
- 20.10
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.