The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Decellularized extracellular matrix: a step towards the next generation source for bioink manufacturing
Open accessAbstract
In tissue engineering, the need for hierarchical assembly of three-dimensional (3D) tissues has become increasingly important, considering that new technology is essential for advanced tissue fabrication. 3D cell printing has emerged as a powerful technology to recapitulate the microenvironment of native tissue, allowing for the precise deposition of multiple cells onto the pre-defined position. Parallel to these technological advances, the search for an appropriate bioink that can provide a suitable microenvironment supporting cellular activities has been in the spotlight. In this respect, the decellularized extracellular matrix (dECM) becomes a popular candidate as a well-qualified source of bioink because of its capability to inherit the intrinsic cues from a native ECM. Yet, few studies have been reported and its potential has been partially understood in the field of 3D cell printing. In this review, our focus is on a dECM as a prospective bioink to facilitate 3D cell printing-based tissue engineering. We begin this review with a brief description of the important role of the ECM. Next, the representative methods of decellularization and conventional applications of a dECM are introduced, followed by the recent achievements in dECM bioinks and their future directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lutolf, M. P., & Hubbell, J. A. (2005) · Nature Biotechnology · doi:10.1038/nbt1055 · Cited by 4,551
Decellularization of tissues and organs
Gilbert, T. W., Sellaro, T. L., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.014 · Cited by 2,222
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Self-citationBiodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367 · cited 2×
“Figure 1(B) reprinted by permission fromMacmillan Publishers Ltd:NatureNanotechnology [45], Copyright 2011.”
BackgroundBiomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060
Immune response to biologic scaffold materials
Badylak, S. F., & Gilbert, T. W. (2008) · Seminars in Immunology · doi:10.1016/j.smim.2007.11.003 · Cited by 857
Acellular vascular tissues: natural biomaterials for tissue repair and tissue engineering
Schmidt, C. E., & Baier, J. M. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00148-4 · Cited by 762
Creation of long-lasting blood vessels
Koike, N., Fukumura, D., Gralla, O., Au, P., Schechner, J. S., & Jain, R. K. (2004) · Nature · doi:10.1038/428138a · Cited by 701
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Self-citationBioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Matrix-bound nanovesicles within ECM bioscaffolds
Huleihel, L., Hussey, G. S., Naranjo, J. D., Zhang, L., Dziki, J. L., Turner, N. J., Stolz, D. B., & Badylak, S. F. (2016) · Science Advances · doi:10.1126/sciadv.1600502 · Cited by 387
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Self-citationSullivan, D. C., Mirmalek-Sani, S.-H., Deegan, D. B., Baptista, P. M., Aboushwareb, T., Atala, A., & Yoo, J. J. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.07.023 · Cited by 363
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Self-citationHuman Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
A Whole-Organ Regenerative Medicine Approach for Liver Replacement
Soto-Gutierrez, A., Zhang, L., Medberry, C., Fukumitsu, K., Faulk, D., Jiang, H., Reing, J., Gramignoli, R., Komori, J., Ross, M., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0698 · Cited by 311
Badylak, S. F. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0963-7 · Cited by 307
Schenke-Layland, K., Vasilevski, O., Opitz, F., König, K., Riemann, I., Halbhuber, K. J., Wahlers, T., & Stock, U. A. (2003) · Journal of Structural Biology · doi:10.1016/j.jsb.2003.08.002 · Cited by 302
3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
Self-citationThe impact of detergents on the tissue decellularization process: A ToF-SIMS study
White, L. J., Taylor, A. J., Faulk, D. M., Keane, T. J., Saldin, L. T., Reing, J. E., Swinehart, I. T., Turner, N. J., Ratner, B. D., & Badylak, S. F. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.033 · Cited by 268
Perfusion decellularization of human and porcine lungs: Bringing the matrix to clinical scale
Gilpin, S. E., Guyette, J. P., Gonzalez, G., Ren, X., Asara, J. M., Mathisen, D. J., Vacanti, J. P., & Ott, H. C. (2014) · The Journal of Heart and Lung Transplantation · doi:10.1016/j.healun.2013.10.030 · Cited by 263
Zhang, Q., Jiang, Y., Zhang, Y., Ye, Z., Tan, W., & Lang, M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.10.008 · Cited by 102
Cited by
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Kim, B. S., Kwon, Y. W., Kong, J.-S., Park, G. T., Gao, G., Han, W., Kim, M.-B., Lee, H., Kim, J. H., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.040 · Cited by 502
Self-citationRecent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Placone, J. K., & Engler, A. J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 486
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Self-citationAskari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
“100 Accordingly, a 3D cell-printed skin tissue utilizing skin-dECM (S-dECM) was presented by Cho ’ s group.”
BackgroundMethod
Metadata
- Authors
- Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D.-W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-08-04
- Volume
- 9
- Issue
- 3
- Pages
- 034104
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2734350842
- Cited by
- 206
- References
- 25
- FWCI
- 9.43
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.