Survey of DC-DC Non-Isolated Topologies for Unidirectional Power Flow in Fuel Cell Vehicles
Open accessThe DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Abstract
The automobile companies are focusing on recent technologies such as growing Hydrogen (H2) and Fuel Cell (FC) Vehicular Power Train (VPT) to improve the Tank-To-Wheel (TTW) efficiency. Benefits, the lower cost, `Eco' friendly, zero-emission and high-power capacity, etc. In the power train of fuel cell vehicles, the DC-DC power converters play a vital role to boost the fuel cell stack voltage. Hence, satisfy the demand of the motor and transmission in the vehicles. Several DC-DC converter topologies have proposed for various vehicular applications like fuel cell, battery, and renewable energy fed hybrid vehicles etc. Most cases, the DC-DC power converters are viable and cost-effective solutions for FC-VPT with reduced size and increased efficiency. This article describes the state-of-the-art in unidirectional non-isolated DC-DC Multistage Power Converter (MPC) topologies for FC-VPT application. The paper presented the comprehensive review, comparison of different topologies and stated the suitability for different vehicular applications. This article also discusses the DC-DC MPC applications more specific to the power train of a small vehicle to large vehicles (bus, trucks etc.). Further, the advantages and disadvantages pointed out with the prominent features for converters. Finally, the classification of the DC-DC converters, its challenges, and applications for FC technology is presented in the review article as state-of-the-art in research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123 · cited 7×
“The coupled inductor is another solution to increase the voltage conversion ratio [65].”
BackgroundMethodSelf-citationThe state of the art of electric, hybrid, and fuel cell vehicles
Chan, C. C. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892489 · Cited by 1,987 · cited 1×
“The output voltage of the fuel cell is few, and the number of stacking more fuel cell is not the optimal solution to increase the terminal voltage, to satisfy the demand of power train and luxurious electrical loads [19], [81].”
BackgroundModern electric, hybrid electric, and fuel cell vehicles fundamentals, theory, and design
Ehsani, M., Gao, Y., & Emadi, A. (2005) · Cited by 1,613
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles
Zhu, Z. Q., & Howe, D. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.892482 · Cited by 1,547
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423 · cited 5×
“The power circuit of the converter discussed in [128], [144] shown in Fig.”
BackgroundMethodInfluentialAxelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379 · cited 4×
“In [109]–[113], ZETA DC-DC converter based on the diode assist capacitor derived.”
BackgroundMethodInfluentialThe state of the art of electric and hybrid vehicles
Chan, C. C. (2002) · Proceedings of the IEEE · doi:10.1109/5.989873 · Cited by 1,100
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
Self-citationSustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
Graves, C., Ebbesen, S. D., Mogensen, M., & Lackner, K. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.014 · Cited by 1,056
Analysis and Optimization of Switched-Capacitor DC–DC Converters
Seeman, M. D., & Sanders, S. R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915182 · Cited by 1,053
Cascaded DC–DC Converter Connection of Photovoltaic Modules
Walker, G. R., & Sernia, P. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830090 · Cited by 1,032
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015 · cited 2×
“In [143], coupled inductor-based converter flying structure with the common ground discussed for the step-up applications.”
BackgroundMethodRichardson, D. B. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.042 · Cited by 999
Liu, C., Chau, K. T., Wu, D., & Gao, S. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2271951 · Cited by 917
Salmasi, F. R. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.899933 · Cited by 863
A review of the main parameters influencing long-term performance and durability of PEM fuel cells
Schmittinger, W., & Vahidi, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.070 · Cited by 819
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809
Self-citationTransformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808 · cited 4×
“2− D = fsTon 2− fsTon (32) In [126], a transformer-less DC-DC converter proposed by utilizing two switches instead of three diodes in the switched inductor.”
BackgroundMethodInfluentialVoltage Multiplier Cells Applied to Non-Isolated DC–DC Converters
Prudente, M., Pfitscher, L. L., Emmendoerfer, G., Romaneli, E. F., & Gules, R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915762 · Cited by 750 · cited 2×
“In [127], the boost converter proposed with HSI-SC (here act as voltage multiplier).”
MethodEmadi, A., Rajashekara, K., Williamson, S. S., & Lukic, S. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2005.847445 · Cited by 733 · cited 13×
“Therefore, the power electronics technology plays a viable role in circulating current, VOLUME 8, 2020 178131 power in VPT and to employ the advanced functionality and luxurious loads in vehicles [81].”
BackgroundMethodInfluentialEmadi, A., Williamson, S. S., & Khaligh, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872378 · Cited by 714 · cited 12×
“Both the Fuel Cell Vehicles (FCVs) and HEVs technologies are gaining more attention in research, and they are going to play a vital role for the next decades [7]–[11].”
BackgroundInfluentialFuel cell and battery electric vehicles compared
Thomas, C. E. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.06.003 · Cited by 702
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
High Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591 · cited 3×
“The remaining stages operated with a lower duty cycle, thus switching losses is reduced [69].”
BackgroundAmmonia-fed fuel cells: a comprehensive review
Afif, A., Radenahmad, N., Cheok, Q., Shams, S., Kim, J. H., & Azad, A. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.120 · Cited by 569 · cited 1×
“Among the types of the fuel cell, PEM-FC gaining more popularity due to its high-power density, moderate temperature, low corrosion, regular storage, and robustness against shock and vibration [50]–[58].”
BackgroundChalk, S. G., & Miller, J. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.058 · Cited by 545 · cited 1×
“Both the Fuel Cell Vehicles (FCVs) and HEVs technologies are gaining more attention in research, and they are going to play a vital role for the next decades [7]–[11].”
BackgroundIndustrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
A DC–DC multilevel boost converter
Rosas-Caro, J. C., Ramirez, J. M., Peng, F. Z., & Valderrabano, A. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0253 · Cited by 522 · cited 2×
“transfer of energy from one capacitor to another capacitor, hence also called charge pump network [103], [108]–[114].”
BackgroundShareef, H., Islam, M. M., & Mohamed, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.033 · Cited by 497 · cited 1×
“These days, the fossil fuel system, dwindling to excessive utilization and burning of fossil fuels for the vehicular application, which leads to emission of Green House Gases (CHG) [1]–[6].”
BackgroundShen, J., & Khaligh, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2464690 · Cited by 466
Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies
Das, H. S., Tan, C. W., & Yatim, A. H. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.056 · Cited by 463 · cited 1×
“The power electronic circuits are responsible for the conversion of energy, circulation, control of energy within the power train and as a prime mover for efficient, cost-effective vehicles [43]–[47].”
BackgroundRecent advances and challenges of fuel cell based power system architectures and control – A review
Das, V., Padmanaban, S., Venkitusamy, K., Selvamuthukumaran, R., Blaabjerg, F., & Siano, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.148 · Cited by 459
Self-citationHybrid Switched-Inductor Converters for High Step-Up Conversion
Tang, Y., Fu, D., Wang, T., & Xu, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364797 · Cited by 451
Present Status and Future Trends in Electric Vehicle Propulsion Technologies
Rajashekara, K. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2259614 · Cited by 446 · cited 1×
“The power train of Battery Electric Vehicles (BEVs), Hybrid Electric Vehicles (HEVs) and Fuel Cell Vehicles (FCVs) provide a feasible solution to overcome the drawback of ICE power train [22]–[27].”
BackgroundA Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090362 · Cited by 412 · cited 2×
“In [152], Quadratic Boost Converter (QBC) proposed to attain a high voltage conversion ratio.”
BackgroundMethodAjami, A., Ardi, H., & Farakhor, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360495 · Cited by 406
Aggregated Impact of Plug-in Hybrid Electric Vehicles on Electricity Demand Profile
Darabi, Z., & Ferdowsi, M. (2011) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2011.2158123 · Cited by 405
Polymer Electrolyte Fuel Cell Durability
(2009) · Springer eBooks · doi:10.1007/978-0-387-85536-3 · Cited by 396
Cascaded DC–DC Converter Photovoltaic Systems: Power Optimization Issues
Bratcu, A. I., Munteanu, I., Bacha, S., Pïcault, D., & Raison, B. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043041 · Cited by 376 · cited 1×
“The cascaded power converters provide an average voltage conversion ratio by increasing the number of switches [90]– [93].”
BackgroundA Family of Single-Switch PWM Converters With High Step-Up Conversion Ratio
Ismail, E. H., Al-Saffar, M. A., Sabzali, A. J., & Fardoun, A. A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916427 · Cited by 359 · cited 5×
“In [111]–[113], a new DC-DC High Voltage Derived Inverting ZETA Converter (HVDIZC) discussed.”
BackgroundInfluentialCharge Pump Circuits: An Overview on Design Strategies and Topologies
Palumbo, G., & Pappalardo, D. (2010) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2009.935695 · Cited by 338 · cited 1×
“transfer of energy from one capacitor to another capacitor, hence also called charge pump network [103], [108]–[114].”
BackgroundSwitched-capacitor power electronics circuits
Ioinovici, A. (2001) · IEEE Circuits and Systems Magazine · doi:10.1109/7384.963467 · Cited by 333 · cited 2×
“In [108]–[110], the non-inverting SC boost converter discussed with the low voltage stress across the switch.”
BackgroundPerformance Analysis of Current BEVs Based on a Comprehensive Review of Specifications
Grunditz, E. A., & Thiringer, T. (2016) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2571783 · Cited by 329
Optimal Dimensioning and Power Management of a Fuel Cell/Battery Hybrid Bus via Convex Programming
Hu, X., Murgovski, N., Johannesson, L. M., & Egardt, B. (2015) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2336264 · Cited by 307
A Design Methodology for Switched-Capacitor DC-DC Converters
Seeman, M. D. (2009) · doi:10.21236/ada538398 · Cited by 297
Novel High Step-Up DC–DC Converter for Distributed Generation System
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2107721 · Cited by 295 · cited 4×
“In [151], a new high step-up converter with multiplier stage proposed in which two capacitors are charged in parallel and discharged in series with energy stored in the inductor.”
BackgroundMethodInfluentialEV/PHEV Bidirectional Charger Assessment for V2G Reactive Power Operation
Kisacikoglu, M. C., Ozpineci, B., & Tolbert, L. M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251007 · Cited by 291
Tapped-inductor buck converter for high-step-down DC-DC conversion
Yao, K., Ye, M., Xu, M., & Lee, F. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850920 · Cited by 278 · cited 4×
“The power circuit of the converter discussed in [115], [150] depicted in Fig.”
BackgroundMethodInfluentialInterleaved Converter With Voltage Multiplier Cell for High Step-Up and High-Efficiency Conversion
Li, W., Zhao, Y., Deng, Y., & He, X. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2048340 · Cited by 278 · cited 2×
“The power circuit of the converter discussed in [162] depicted in Fig.”
BackgroundMethodNew DC–DC converter for energy storage system interfacing in fuel cell hybrid electric vehicles
Marchesoni, M., & Vacca, C. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886650 · Cited by 263
Analysis of integrated boost-flyback step-up converter
Liang, T. J., & Tseng, K. C. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045003 · Cited by 263 · cited 2×
“The hybrid combination of the conventional boost converter and fly-back converter (Hybrid-Boost-Fly-back Converter) are discussed in [144], [147], [148].”
MethodTopological Overview of Powertrains for Battery-Powered Vehicles With Range Extenders
Aharon, I., & Kuperman, A. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2107037 · Cited by 257
A High Efficiency Dual-Mode Buck Converter IC For Portable Applications
Liou, W.-R., Yeh, M.-L., & Kuo, Y. L. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915047 · Cited by 254
Positive output Luo converters: voltagelift technique
Luo, F. L. (1999) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19990291 · Cited by 234 · cited 1×
“In [174], [177], the negative output Luo converter is pro-”
BackgroundUltra Step-Up DC–DC Converter With Reduced Switch Stress
Fardoun, A. A., & Ismail, E. H. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2058833 · Cited by 212 · cited 1×
“In [129], HSI-SC based ultra-step-up DC-DC converter proposed.”
High-efficiency DC/DC converter with high voltage gain
Wai, R. J., & Duan, R. Y. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045067 · Cited by 206
Interleaved Buck Converter Having Low Switching Losses and Improved Step-Down Conversion Ratio
Lee, I.-O., Cho, S.-Y., & Moon, G.-W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2185515 · Cited by 204 · cited 4×
“In [115], [117]–[119], [132], [133], buck converter with Switched Inductor (SI) proposed.”
BackgroundMethodInfluentialDesign and analysis of switched-capacitor-based step-up resonant converters
Law, K. K., Cheng, K. W. E., & Yeung, Y. P. B. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2004.840482 · Cited by 204 · cited 2×
“The power circuit discussed in [131] shown in Fig.”
BackgroundQuadratic boost converter with low buffer capacitor stress
Ye, Y., & Eric Cheng, K. W. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0205 · Cited by 202 · cited 5×
“The limitation of the active power switch overcome by the Quadratic Boost Converter (QBC) [96]–[98].”
BackgroundMethodInfluentialWilliamson, S. S., Emadi, A., & Rajashekara, K. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896967 · Cited by 199 · cited 1×
“The power electronic circuits are responsible for the conversion of energy, circulation, control of energy within the power train and as a prime mover for efficient, cost-effective vehicles [43]–[47].”
BackgroundSiwakoti, Y. P., Loh, P. C., Blaabjerg, F., & Town, G. E. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2296517 · Cited by 186
Self-citationMulticell Switched-Inductor/Switched-Capacitor Combined Active-Network Converters
Tang, Y., Wang, T., & Fu, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2325052 · Cited by 170
Li, W., Xiang, X., Li, C., Li, W., & He, X. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2199771 · Cited by 170 · cited 2×
“The power circuit of the converter discussed in [165] shown in Fig.”
BackgroundMethodSwitched-coupled inductor cell for DC–DC converters with very large conversion ratio
Berkovich, Y., & Axelrod, B. (2011) · IET Power Electronics · doi:10.1049/iet-pel.2009.0341 · Cited by 170 · cited 3×
“In [111]–[113], a new DC-DC High Voltage Derived SEPIC converter (HVDSC) discussed.”
BackgroundPV powered smart charging station for PHEVs
Goli, P., & Shireen, W. (2014) · Renewable Energy · doi:10.1016/j.renene.2013.11.066 · Cited by 165 · cited 1×
“The power train of Battery Electric Vehicles (BEVs), Hybrid Electric Vehicles (HEVs) and Fuel Cell Vehicles (FCVs) provide a feasible solution to overcome the drawback of ICE power train [22]–[27].”
BackgroundTransformerless DC-to-DC Converters with Large Conversion Ratios
Middlebrook, R. D. (1984) · INTELEC '84 - International Telecommunications Energy Conference · doi:10.1109/intlec.1984.4794165 · Cited by 159 · cited 1×
“In [94], cascaded Cuk converter approach is employed, but result in reduced efficiency and higher losses due to a large number of components.”
MethodNon isolated high gain DC-DC converter topologies for PV applications – A comprehensive review
Sri Revathi, B., & Prabhakar, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.08.057 · Cited by 159 · cited 1×
“These DC-DC converters are also suitable to achieve higher voltage demand of power train [65]–[71].”
BackgroundSix self-lift DC-DC converters, voltage lift technique
Luo, F. L. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969408 · Cited by 158 · cited 1×
“Voltage lift technique is employed to overcome the effect of the parasitic element in the power circuit of the Luo converter [174]–[178].”
MethodModeling and Analysis of Coupled Inductors in Power Converters
Zhu, G., McDonald, B. A., & Wang, K. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2079953 · Cited by 152
High Gain DC–DC Converter Based on the Cockcroft–Walton Multiplier
Muller, L., & Kimball, J. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2505678 · Cited by 151
Efficiency, cost and life cycle CO2 optimization of fuel cell hybrid and plug-in hybrid urban buses
Ribau, J., Silva, C., & Sousa, J. M. C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.05.015 · Cited by 146 · cited 1×
“, responsible for the emission of CHG [12]–[14].”
BackgroundGoing electric: Expert survey on the future of battery technologies for electric vehicles
Catenacci, M., Verdolini, E., Bosetti, V., & Fiorese, G. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.06.078 · Cited by 144
Polymer Electrolyte Fuel Cell Durability
Schiraldi, D. A. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900508 · Cited by 143
An Interleaved Winding-Coupled Boost Converter With Passive Lossless Clamp Circuits
Li, W., & He, X. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900521 · Cited by 143 · cited 2×
“In [164], to achieve a high voltage conversion ratio and ZCS, a new interleaved winding coupled inductor boost converter proposed.”
BackgroundMethodHigh efficiency high step-up DC/DC converters - a review
Tomaszuk, A., & Krupa, A. (2011) · Bulletin of the Polish Academy of Sciences Technical Sciences · doi:10.2478/v10175-011-0059-1 · Cited by 141 · cited 4×
“In [128], High efficiency, high step-up soft switching boost converter proposed by using HSI-SC stage with an additional capacitor.”
BackgroundMethodInfluentialWilliamson, S. S., & Emadi, A. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2005.847444 · Cited by 134 · cited 11×
“Therefore, the power electronics technology plays a viable role in circulating current, VOLUME 8, 2020 178131 power in VPT and to employ the advanced functionality and luxurious loads in vehicles [81].”
BackgroundInfluentialA Family of Two-Switch Boosting Switched-Capacitor Converters
Wu, B., Li, S., Smedley, K. M., & Singer, S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2375311 · Cited by 127 · cited 1×
“In [95], [182], two-switch voltagemultiplier (VMC) is proposed and discussed without utilizing the magnetic components.”
MethodLiu, H., & Li, F. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2480115 · Cited by 125 · cited 3×
“Apart from this, recently many DC-DC converters based on Switched Inductor (SI) and Switch Capacitor (SC) concept proposed with the coupled inductor, transformer and voltage multiplier to attain the large conversion ratio [139]–[173].”
BackgroundMethodSynthesis of Tapped-Inductor Switched-Mode Converters
Grant, D. A., Darroman, Y., & Suter, J. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904215 · Cited by 120 · cited 1×
“In [140]–[142], a complete review of tapping DC-DC converter and its types discussed.”
BackgroundThe evolution of power electronics
Wilson, T. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.844503 · Cited by 120
Negative output Luo converters: voltagelift technique
Luo, F. L. (1999) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19990302 · Cited by 119
Jiao, Y., Luo, F. L., & Zhu, M. (2011) · IET Power Electronics · doi:10.1049/iet-pel.2010.0021 · Cited by 118 · cited 1×
“T − Ton = 3+ fsTon 1− fsTon (26) In [130], positive output hybrid converters with Switched Inductor (Luo converter with SI), and self-lift positive output hybrid converter with HSI-SC, double self-lift positive output hybrid converter with HSI-SC (Luo converter with HSI-SC) presented to attain the higher conversion ra…”
MethodHigh‐voltage‐gain quadratic boost converter with voltage multiplier
Zhang, N., Sutanto, D., Muttaqi, K. M., Zhang, B., & Qiu, D. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0767 · Cited by 112 · cited 1×
“In [149], Quadratic Boost Converter (QBC) is proposed with the coupled inductor to obtain a high voltage conversion ratio.”
Modelling and analysis of switch-mode cascade converters with a single active switch
Ortiz-Lopez, M. G., Leyva-Ramos, J., Carbajal-Gutierrez, E. E., & Morales‐Saldaña, J. A. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20070379 · Cited by 112 · cited 1×
“The cascaded power converters provide an average voltage conversion ratio by increasing the number of switches [90]– [93].”
BackgroundAlcazar, Y. J. A., Oliveira, D. S., Tofoli, F. L., & Torrico-Bascope, R. P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213555 · Cited by 112 · cited 1×
“In [183], the hybrid DC-DC converter is proposed based on the three-state switching cell, voltage multiplier and transformer.”
MethodHybrid Switched-Capacitor – ĆUK/Zeta/Sepic Converters in Step-Up Mode
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2005) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2005.1464836 · Cited by 111 · cited 3×
“The classical DC-DC converters are not adequate for high ormoderate voltage applications [88], [89].”
BackgroundYu, W., Hutchens, C., Lai, J., Zhang, J., Lisi, G., Djabbari, A., Smith, G., & Hegarty, T. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316154 · Cited by 110 · cited 1×
“The coupled inductor based DC-DC high step-up converters are proposed with SC or charge Pump [128], [144]– [146].”
BackgroundLi, S., Zheng, Y., Wu, B., & Smedley, K. M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2669841 · Cited by 106 · cited 18×
“Vout Vin = 1+ D 1− D = T + Ton T − Ton = 1+ fsTon 1− fsTon (11) Vout Vin = 1+ √ 1+ 4T 2 on T 2k 2 , k = 2L RTS (12) In [111]–[113], a new DC-DC High Voltage Derived Inverting ZETA Converter (HVDIZC) discussed.”
BackgroundInfluentialQuasi-Y-Source Boost DC–DC Converter
Siwakoti, Y. P., Blaabjerg, F., & Loh, P. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440781 · Cited by 102 · cited 2×
“In [154]–[156], to overcome the drawback of discontinuous current, a new DC-DC Y-source converter is proposed with simple modification by adding a capacitor to smoothen the current.”
BackgroundMethodSelf-citationA Fully Directional Universal Power Electronic Interface for EV, HEV, and PHEV Applications
Onar, O. C., Kobayashi, J., & Khaligh, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2236106 · Cited by 100
Park, K.-B., Moon, G., & Youn, M.-J. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2170223 · Cited by 98 · cited 3×
“The power circuit of the converter discussed in [148] depicted in Fig.”
BackgroundMethodPadmanaban, S., Bhaskar, M. S., Maroti, P. K., Blaabjerg, F., & Fedák, V. (2018) · Energies · doi:10.3390/en11040783 · Cited by 86
Self-citationAndreasen, S. J., Jespersen, J., Schaltz, E., & Kær, S. K. (2009) · Fuel Cells · doi:10.1002/fuce.200800137 · Cited by 84 · cited 1×
“Because of the characteristics and performance of the fuel cells depend on the operating temperature [48], [49].”
BackgroundYong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Selvaraj, J. A.-L. (2016) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2617400 · Cited by 82
Self-citationQuadratic Power Conversion for Power Electronics: Principles and Circuits
Wijeratne, D. S., & Moschopoulos, G. (2011) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2011.2163976 · Cited by 78
A Family of DCDC Multiplier Converters
Rosas‐Caro, J. C., Mayo‐Maldonado, J. C., Salas-Cabrera, R., Nacu, E., & Castillo-Ibarra, R. (2011) · Cited by 75
A Family of Single-Stage Switched-Capacitor–Inductor PWM Converters
Ye, Y., & Cheng, K. W. E. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2245918 · Cited by 74
A new quadratic boost converter with high voltage step-up ratio and reduced voltage stress
Yang, P., Xu, J., Zhou, G., & Zhang, S. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2012.6258989 · Cited by 71 · cited 17×
“QBC strategy employed for several stages using a single switch and utilizing the number of uncontrolled switches (diodes).”
BackgroundInfluentialFuel Cell Power Management Using Genetic Expression Programming in All-Electric Ships
Abkenar, A. T., Nazari, A., Jayasinghe, S. G., Kapoor, A., & Negnevitsky, M. (2017) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2017.2693275 · Cited by 70
Mahajan, S. B., Padmanaban, S., Wheeler, P. W., Blaabjerg, F., Rivera, M. E., & Kulkarni, R. M. (2016) · IEEE International Conference on Automatica · doi:10.1109/ica-acca.2016.7778458 · Cited by 70 · cited 3×
“24 shows the universal structure of the X-Y converter family [197]–[203].”
BackgroundSelf-citationBhaskar, M. S., Padmanaban, S., & Blaabjerg, F. (2017) · Energies · doi:10.3390/en10050719 · Cited by 69 · cited 2×
“In [95], a multistage converter with a magnetic componentfree proposed by using diodes and capacitor network to attain the maximum conversion ratio.”
MethodSelf-citationWang, D., He, X., & Zhao, R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003985 · Cited by 66 · cited 2×
“The power circuit of the converter discussed in [161] depicted in Fig.”
BackgroundMethodHigh‐voltage boost quasi‐Z‐source isolated DC/DC converter
Siwakoti, Y. P., Blaabjerg, F., Loh, P. C., & Town, G. E. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0845 · Cited by 65 · cited 3×
“In [153]–[156], DC-DC converter proposed with another technique by employing quasi-Y-source network to smoothen the current by adding one additional capacitor and inductor.”
BackgroundMethodSelf-citationPropulsion System Architecture and Power Conditioning Topologies for Fuel Cell Vehicles
Prasanna, U. R., Pan, X., Rathore, A. K., & Rajashekara, K. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2331464 · Cited by 65
Redox flow batteries for hybrid electric vehicles: Progress and challenges
Mohamed, M. R., Sharkh, S. M., & Walsh, F. C. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289801 · Cited by 65
Reforming methanol to electricity in a high temperature PEM fuel cell
Avgouropoulos, G., Papavasiliou, J., Daletou, M. K., Kallitsis, J. K., Ioannides, T., & Neophytides, S. G. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.04.025 · Cited by 62
A survey on voltage boosting techniques for step-up DC-DC converters
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854792 · Cited by 60
Self-citationUnified Synthesis of Tapped-Inductor DC-to-DC Converters
Williams, B. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2291561 · Cited by 57
Pihef: Plug-In Hybrid Electric Factor
Wirasingha, S. G., & Emadi, A. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2115263 · Cited by 55 · cited 1×
“This reason for many researchers throughout the world to find new strategies for power train and develop new energy sources to reduce CHG and to improve the performance of power train of the vehicles [17]–[21].”
BackgroundIqbal, A., Bhaskar, M. S., Meraj, M., Padmanaban, S., & Rahman, S. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2912797 · Cited by 53 · cited 2×
“The classical DC-DC converters are not adequate for high ormoderate voltage applications [88], [89].”
BackgroundSelf-citationDuality approach to the study of switched‐inductor power converters and its higher‐order variations
Cheng, K. W. E., & Ye, Y. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0689 · Cited by 51
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2006) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2006.1693770 · Cited by 47 · cited 2×
“The converter designed by hybridization of SC in the classical boost converter [102].”
MethodIda, T., Murakami, K., & Tanaka, M. (2014) · Energy Research & Social Science · doi:10.1016/j.erss.2014.04.005 · Cited by 45
Iqbal, A., Bhaskar, M. S., Meraj, M., & Padmanaban, S. (2018) · IEEE Access · doi:10.1109/access.2018.2881391 · Cited by 44 · cited 3×
“In [179]–[181], DC-DC step-up converter derived by combining the circuit of N-stage voltage multiplier (VMC) with the conventional buck-boost or boost converter for high stepup application.”
BackgroundMethodSelf-citationStatic performance and parasitic analysis of tapped‐inductor converters
Shi, Z., Cheng, K. W. E., & Ho, S. L. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2012.0760 · Cited by 42 · cited 1×
“In [140]–[142], a complete review of tapping DC-DC converter and its types discussed.”
BackgroundMagnetically coupled buck converters
Ikriannikov, A., & Schmid, T. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647368 · Cited by 39 · cited 1×
“In [168]–[171], the interleaved buck converter proposed with the coupled inductor.”
BackgroundGreenhouse Gas Emissions of Electric Vehicles Associated with Wind and Photovoltaic Electricity
Querini, F., Dagostino, S., Morel, S., & Rousseaux, P. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.03.038 · Cited by 37 · cited 8×
“These days, the fossil fuel system, dwindling to excessive utilization and burning of fossil fuels for the vehicular application, which leads to emission of Green House Gases (CHG) [1]–[6].”
BackgroundInfluentialA Review of Non-Isolated High Step-Down Dc-Dc Converters
Farooq, A., Malik, Z. H., Sun, Z., & Chen, G. (2015) · International Journal of Smart Home · doi:10.14257/ijsh.2015.9.8.15 · Cited by 36 · cited 7×
“In [115], Quadratic Buck Converter (QBC) based on the front end HSI-SC structure proposed.”
BackgroundMethodInfluentialBhaskar, M. S., Kulkarni, R. M., Padmanaban, S., Siano, P., & Blaabjerg, F. (2016) · IEEE International Conference on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) · doi:10.1109/eeeic.2016.7555827 · Cited by 31 · cited 1×
“In [194], Nx Interleaved Multilevel Boost Converter (Nx IMBC) proposed to reduce the input current ripple with a high FIGURE 24.”
BackgroundSelf-citationBhaskar, M. S., Padmanaban, S., Blaabjerg, F., Fedák, V., Cernat, M., & Kulkarni, R. M. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2016.7751989 · Cited by 31 · cited 1×
“In [195], a new 2Nx Interleaved Multilevel Boost Converter (2Nx IMBC) proposed to increase the voltage conversion ratio of the interleaved converter.”
BackgroundSelf-citationMagnetically coupled high‐gain Y‐source isolated DC/DC converter
Siwakoti, Y. P., Loh, P. C., Blaabjerg, F., & Town, G. E. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0957 · Cited by 30 · cited 4×
“In [153]–[156], DC-DC converter proposed with another technique by employing quasi-Y-source network to smoothen the current by adding one additional capacitor and inductor.”
BackgroundMethodSelf-citationNon-isolated and inverting Nx multilevel boost converter for photovoltaic DC link applications
Mahajan, S. B., Padmanaban, S., Ojo, O., Rivera, M. E., & Kulkarni, R. M. (2016) · IEEE International Conference on Automatica · doi:10.1109/ica-acca.2016.7778453 · Cited by 29 · cited 1×
“To achieve the inverting voltage, a new inverting Nx MBC proposed in [191].”
MethodSelf-citationMultistage switched inductor boost converter for renewable energy application
Maroti, P. K., Padmanaban, S., Bhaskar, M. S., Blaabjerg, F., Ramachandaramurthy, V. K., Siano, P., & Fedák, V. (2017) · IEEE Conference on Energy Conversion · doi:10.1109/cencon.2017.8262504 · Cited by 26
Self-citationInterleaved step-up converter with a single-capacitor snubber for PV energy conversion applications
Tseng, S.-Y., & Hsu, C.-Y. (2013) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2013.06.007 · Cited by 24 · cited 2×
“In [167], Interleaved Boost Converter (IBC) proposed with the coupled inductor.”
BackgroundMethodBhaskar, M. S., Padmanaban, S., Blaabjerg, F., Norum, L. E., & Ertas, A. H. (2016) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes.2016.7914529 · Cited by 22 · cited 1×
“In [196], a new 4Nx Interleaved Multilevel Boost Converter (4Nx-IMBC) proposed to increase the voltage conversion ratio of the interleaved converter.”
BackgroundSelf-citationBhaskar, M. S., Padmanaban, S., Blaabjerg, F., & Wheeler, P. W. (2018) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2018.8459958 · Cited by 21
Self-citationXu, X., Wang, H., Zhang, N., Liu, Z., & Wang, X. (2017) · IEEE Access · doi:10.1109/access.2017.2725298 · Cited by 21 · cited 1×
“Both the Fuel Cell Vehicles (FCVs) and HEVs technologies are gaining more attention in research, and they are going to play a vital role for the next decades [7]–[11].”
BackgroundA novel 2L-Y DC-DC converter topologies for high conversion ratio renewable application
Maroti, P. K., Padmanaban, S., Bhaskar, M. S., Blaabjerg, F., Ramachandaramurthy, V. K., Siano, P., & Fedák, V. (2017) · IEEE Conference on Energy Conversion · doi:10.1109/cencon.2017.8262506 · Cited by 21 · cited 2×
“L-Y, 2L-Y, 2LC-Y and 2LCm-Y converters are four groups of X-Y converter family [201]–[203].”
BackgroundSelf-citationBhaskar, M. S., Alammari, R. A. M., Meraj, M., Iqbal, A., & Padmanaban, S. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0066 · Cited by 20 · cited 3×
“In [179]–[181], DC-DC step-up converter derived by combining the circuit of N-stage voltage multiplier (VMC) with the conventional buck-boost or boost converter for high stepup application.”
BackgroundMethodSelf-citationBhaskar, M. S., Padmanaban, S., Maroti, P. K., Fedák, V., Blaabjerg, F., & Ramachandaramurthy, V. K. (2017) · International Conference on Electrical Drives and Power Electronics (EDPE) · doi:10.1109/edpe.2017.8123270 · Cited by 18
Self-citationTan, K. M., Ramachandaramurthy, V. K., & Yong, J. Y. (2016) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2016.7512913 · Cited by 17
Self-citationMultilevel buck dc-dc converter for high voltage application
Costa, L. F., Mussa, S. A., & Barbi, I. (2012) · IEEE International Conference on Industry Applications · doi:10.1109/induscon.2012.6453673 · Cited by 16 · cited 1×
“In [172], the multilevel buck converter proposed by using several active switches for high voltage step-up application.”
MethodHigh voltage conversion ratio, switched C & L cells, step-down DC-DC converter
Pelan, O., Muntean, N., Cornea, O., & Blaabjerg, F. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647459 · Cited by 16 · cited 1×
“In [168]–[171], the interleaved buck converter proposed with the coupled inductor.”
BackgroundSelf-citationA novel switched capacitor circuit for battery cell balancing speed improvement
Wang, Y., Yin, H., Han, S., Alsabbagh, A., & Ma, C. (2017) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2017.8001556 · Cited by 16
Bhaskar, M. S., Padmanaban, S., Wheeler, P. W., Blaabjerg, F., & Siano, P. (2018) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2018.8450120 · Cited by 14 · cited 4×
“24 shows the universal structure of the X-Y converter family [197]–[203].”
BackgroundSelf-citationPower conditioning system for fuel cells for integration to ships
Luckose, L., Hess, H., & Johnson, B. K. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289743 · Cited by 11 · cited 2×
“The objective of this article is to present, the state-ofart review of unidirectional non-isolated DC-DC Multistage Power Converter (MPC) topologies for FC-VPT by comparison and application.”
BackgroundComparison of conventional dc-dc converter and a family of diode-assisted dc-dc converter
Zhang, Y., Zhang, C., Liu, J., & Cheng, Y. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2012.6259095 · Cited by 11
Padmanaban, S., Bhaskar, M. S., Blaabjerg, F., & Yang, Y. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8592896 · Cited by 10 · cited 1×
“Recently X-Y converters are also combined with voltage doubler [201]–[203], voltage multiplier [204]–[208] to achieve higher output voltage.”
BackgroundSelf-citationBhaskar, M. S., Ben‐Brahim, L., Iqbal, A., Padmanaban, S., Meraj, M., & Rahman, S. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721918 · Cited by 9
Self-citationA high gain DC-DC converter using voltage multiplier
Maroti, P. K., Bhaskar, M. S., & Revathi, B. S. (2014) · International Conference on Advances in Electrical Engineering · doi:10.1109/icaee.2014.6838480 · Cited by 8 · cited 2×
“Recently, the Switched Inductor (SI) andHybrid combination of Switched Inductor and Switched-Capacitor (HSI-SC) proposed to lift the voltage with high conversion ratio [65], [88]–[91].”
BackgroundXL Converters- New Series of High Gain DC-DC Converters for Renewable Energy Conversion
Bhaskar, M. S., Sanjeevikumar, P., Pedersen, J. K., Holm‐Nielsen, J. B., & Leonowicz, Z. M. (2019) · IEEE International Conference on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) · doi:10.1109/eeeic.2019.8783817 · Cited by 8 · cited 2×
“In [209]–[211], single input double output DC-DC converters derived for vehicular loads.”
BackgroundBhaskar, M. S., Sanjeevikumar, P., Holm‐Nielsen, J. B., Pedersen, J. K., & Leonowicz, Z. M. (2019) · IEEE International Conference on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) · doi:10.1109/eeeic.2019.8783967 · Cited by 7 · cited 1×
“X-Y CONVERTER FAMILY X-Y converter family (a new breed of the buck-boost converter) is proposed for high voltage step-up applications to overcome the drawback of DC-DC multilevel converters, cascaded converters and isolated converters [197]–[200].”
BackgroundSteep conversion ratio buck converter based on a switched coupled-inductor cell
Berkovich, Y., & Axelrod, B. (2010) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2010.5542050 · Cited by 6 · cited 1×
“In [166], switched coupled inductor based buck converter proposed.”
MethodBhaskar, M. S., Padmanaban, S., Blaabjerg, F., Holm‐Nielsen, J. B., & Ionel, D. M. (2018) · IEEE International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) · doi:10.1109/rtucon.2018.8659892 · Cited by 5
Self-citation
Cited by
Ali, A., H. H. Mousa, H., F. Shaaban, M., A. Azzouz, M., & S. A. Awad, A. (2024) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2023.000107 · Cited by 162
“[11] [16], [17] [18], [19] [20] [13], [21] [12], [22] Study in detail state-of-the-art EV charging topologies and PEC solutions for EV applications from the point of view of their groupings, configurations, control methods, and future research projections and their impacts on the power quality of…”
Metadata
- Authors
- Sagar Bhaskar, M., Ramachandaramurthy, V. K., Padmanaban, S., Blaabjerg, F., Ionel, D. M., Mitolo, M., & Almakhles, D.
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 178130-178166
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3091637248
- Cited by
- 214
- References
- 147
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.