Wireless Power Transfer for Electric Vehicle Applications
The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Abstract
Wireless power transfer (WPT) using magnetic resonance is the technology which could set human free from the annoying wires. In fact, the WPT adopts the same basic theory which has already been developed for at least 30 years with the term inductive power transfer. WPT technology is developing rapidly in recent years. At kilowatts power level, the transfer distance increases from several millimeters to several hundred millimeters with a grid to load efficiency above 90%. The advances make the WPT very attractive to the electric vehicle (EV) charging applications in both stationary and dynamic charging scenarios. This paper reviewed the technologies in the WPT area applicable to EV wireless charging. By introducing WPT in EVs, the obstacles of charging time, range, and cost can be easily mitigated. Battery technology is no longer relevant in the mass market penetration of EVs. It is hoped that researchers could be encouraged by the state-of-the-art achievements, and push forward the further development of WPT as well as the expansion of EV.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Dedicated Short-Range Communications (DSRC) Standards in the United States
Kenney, J. B. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2132790 · Cited by 2,366
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Cannon, B. L., Hoburg, J. F., Stancil, D. D., & Goldstein, S. C. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2017195 · Cited by 924
Shin, J., Shin, S., Kim, Y., Ahn, S., Lee, S., Jung, G., Jeon, S.-J., & Cho, D.-H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258294 · Cited by 856
A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Optimal Design Methodlogy for LLC Resonant Converter
Lu, B., Liu, W., Liang, Y., Lee, F. C., & Van Wyk, J. D. (2006) · Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06. · doi:10.1109/apec.2006.1620590 · Cited by 621
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Low, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
High-Misalignment Tolerant Compensation Topology For ICPT Systems
Villa, J. L., Sallan, J., Sanz Osorio, J. F., & Llombart, A. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2161055 · Cited by 467
Cutting the Cord: Static and Dynamic Inductive Wireless Charging of Electric Vehicles
Lukic, S., & Pantic, Z. (2013) · IEEE Electrification Magazine · doi:10.1109/mele.2013.2273228 · Cited by 424
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273364 · Cited by 406
Circuit-Model-Based Analysis of a Wireless Energy-Transfer System via Coupled Magnetic Resonances
Cheon, S., Kim, Y.-H., Kang, S.-Y., Lee, M. L., Lee, J.-M., & Zyung, T. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072893 · Cited by 395
Simultaneous mid-range power transfer to multiple devices
Kurs, A., Moffatt, R., & Soljačić, M. (2010) · Applied Physics Letters · doi:10.1063/1.3284651 · Cited by 389
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Performance of batteries for electric vehicles on short and longer term
Gerssen-Gondelach, S. J., & Faaij, A. P. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.085 · Cited by 359
Circuit Model Based Analysis of a Wireless Energy Transfer System via Coupled Magnetic Resonances
Cheon, S.-H., Kim, Y.-H., Lee, M.-L., & Kang, S.-Y. (2011) · The Transactions of the Korean Institute of Power Electronics · doi:10.6113/tkpe.2011.16.2.137 · Cited by 337
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Effects of Magnetic Coupling of Nonadjacent Resonators on Wireless Power Domino-Resonator Systems
Lee, C. K., Zhong, W. X., & Hui, S. Y. R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2169460 · Cited by 309
ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer Application
Pantic, Z., Bai, S., & Lukic, S. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2081954 · Cited by 305
10 kHz inductively coupled power transfer - concept and control
Green, A. W. (1994) · Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives · doi:10.1049/cp:19941049 · Cited by 300
A Dynamic Charging System With Reduced Output Power Pulsation for Electric Vehicles
Lu, F., Zhang, H., Hofmann, H., & Mi, C. C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2563380 · Cited by 298
Self-citationOn-Line Electric Vehicle using inductive power transfer system
Lee, S., Huh, J., Park, C., Choi, N.-S., Cho, G.-H., & Rim, C.-T. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618092 · Cited by 277
Effective Capacitive Power Transfer
Theodoridis, M. P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192502 · Cited by 272
Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Contactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
A new IPT magnetic coupler for electric vehicle charging systems
Budhia, M., Covic, G., & Boys, J. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675350 · Cited by 268
Compact contactless power transfer system for electric vehicles
Nagatsuka, Y., Ehara, N., Kaneko, Y., Abe, S., & Yasuda, T. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543313 · Cited by 245
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
Inductive Powering: Basic Theory and Application to Biomedical Systems
Schuylenbergh, K. V., & Puers, R. (2009) · Medical Entomology and Zoology · Cited by 240
Development and evaluation of single sided flux couplers for contactless electric vehicle charging
Budhia, M., Covic, G. A., Boys, J. T., & Huang, C.-Y. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063826 · Cited by 232
An Inductive and Capacitive Combined Wireless Power Transfer System With LC-Compensated Topology
Lu, F., Zhang, H., Hofmann, H., & Mi, C. C. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2519903 · Cited by 232
Self-citationVilla, J. L., Sallán, J., Llombart, A., & Sanz, J. F. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.05.009 · Cited by 201
A bipolar primary pad topology for EV stationary charging and highway power by inductive coupling
Covic, G. A., Kissin, M. L. G., Kacprzak, D., Clausen, N., & Hao, H. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6064008 · Cited by 197
New Cross-Segmented Power Supply Rails for Roadway-Powered Electric Vehicles
Choi, S., Huh, J., Lee, W. Y., Lee, S. W., & Rim, C. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2247634 · Cited by 196
A Direct AC–AC Converter for Inductive Power-Transfer Systems
Li, H. L., Hu, A. P., & Covic, G. A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159397 · Cited by 188
A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications
Zaheer, A., Kacprzak, D., & Covic, G. A. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342811 · Cited by 178
The Qi wireless power standard
van Wageningen, D., & Staring, T. (2010) · Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010 · doi:10.1109/epepemc.2010.5606673 · Cited by 177
Reflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173
A New Concept: Asymmetrical Pick-Ups for Inductively Coupled Power Transfer Monorail Systems
Elliott, G. A. J., Covic, G. A., Kacprzak, D., & Boys, J. T. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.879619 · Cited by 172
Study on intelligent battery charging using inductive transmission of power and information
Hirai, J., Kim, T.-W., & Kawamura, A. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838106 · Cited by 172
Power systems for autonomous underwater vehicles
Bradley, A. M., Feezor, M. D., Singh, H., & Yates Sorrell, F. (2001) · IEEE Journal of Oceanic Engineering · doi:10.1109/48.972089 · Cited by 170
A new approach to power supplies for robots
Esser, A., & Skudelny, H.-C. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.90341 · Cited by 164
Feasibility study on bipolar pads for efficient wireless power chargers
Nguyen, T.-D., Li, S., Li, W., & Mi, C. C. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803531 · Cited by 160
Self-citationContactless Power Delivery System for Mining Applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.363053 · Cited by 160
Wireless power transfer: A survey of EV battery charging technologies
Musavi, F., Edington, M., & Eberle, W. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342593 · Cited by 159
Frequency Decrease Analysis of Resonant Wireless Power Transfer
Zhang, Y., Zhao, Z., & Chen, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2277783 · Cited by 159
Resonant Contactless Energy Transfer With Improved Efficiency
Valtchev, S., Borges, B. V., Brandisky, K., & Klaassens, J. B. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003188 · Cited by 159
Contactless power delivery system for mining applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1991.178024 · Cited by 156
A Series-Tuned Inductive-Power-Transfer Pickup With a Controllable AC-Voltage Output
Wu, H. H., Covic, G. A., Boys, J. T., & Robertson, D. J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2052069 · Cited by 154
A Figure-of-Merit for Designing High-Performance Inductive Power Transmission Links
Kiani, M., & Ghovanloo, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2227914 · Cited by 146
Single Active Switch Power Electronics for Kilowatt Scale Capacitive Power Transfer
Dai, J., & Ludois, D. C. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2334621 · Cited by 145
Form and capacitance of parallel-plate capacitors
Nishiyama, H., & Nakamura, M. (1994) · IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A · doi:10.1109/95.311759 · Cited by 144
Ludois, D. C., Erickson, M. J., & Reed, J. K. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2273484 · Cited by 140
Design of an IGBT-based LCL-resonant inverter for high-frequency induction heating
Dieckerhoff, S., Ruan, M. J., & Doncker, R. W. D. (2003) · doi:10.1109/ias.1999.806017 · Cited by 123
Tang, C., Sun, Y., Su, Y. G., Nguang, S. K., & Hu, A. P. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2007642 · Cited by 122
An Appropriate Magnetic Coupling Co-Efficient for the Design and Comparison of ICPT Pickups
Boys, J. T., Elliott, G. A. J., & Covic, G. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.887590 · Cited by 121
A Wireless Power Pickup Based on Directional Tuning Control of Magnetic Amplifier
Hsu, J.-U. W., Hu, A. P., & Swain, A. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020081 · Cited by 121
LCL Pickup Circulating Current Controller for Inductive Power Transfer Systems
Huang, C.-Y., Boys, J. T., & Covic, G. A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2199132 · Cited by 114
Chigira, M., Nagatsuka, Y., Kaneko, Y., Abe, S., Yasuda, T., & Suzuki, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063778 · Cited by 112
Inductive power coupling for an electric highway system
Bolger, J. G., Kirsten, F. A., & Ng, L. S. (1978) · 28th IEEE Vehicular Technology Conference · doi:10.1109/vtc.1978.1622522 · Cited by 109
On-road charging of electric vehicles
Stamati, T.-E., & Bauer, P. (2013) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2013.6573511 · Cited by 95
Wireless power transmission progress for electric vehicle in Japan
Shinohara, N. (2013) · IEEE Radio and Wireless Symposium (RWS) · doi:10.1109/rws.2013.6486657 · Cited by 95
Grid side regulation of wireless power charging of plug-in electric vehicles
Miller, J. M., White, C. P., Onar, O. C., & Ryan, P. M. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342814 · Cited by 94
Sliding transformers for linear contactless power delivery
Barnard, J. M., Ferreira, J. A., & van Wyk, J. D. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.649938 · Cited by 91
Practical considerations for designing IPT system for EV battery charging
Huang, C.-Y., Boys, J. T., Covic, G. A., & Budhia, M. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289821 · Cited by 90
Comparative Study of CCPT Systems With Two Different Inductor Tuning Positions
Liu, C., Hu, A. P., Covic, G. A., & Nair, N.-K. C. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2158322 · Cited by 88
High frequency resonant inverter for contactless energy transmission over large air gap
Mecke, R., & Rathge, C. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1355378 · Cited by 85
Duan, C., Jiang, C., Taylor, A. R., & Bai, K. (. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0615 · Cited by 69
Contactless inductive power pickup system for Maglev applications
Song, B.-M., Kratz, R., & Gurol, S. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2002.1043746 · Cited by 67
Guy, A. W. (1980) · IEEE MTT-S International Microwave Symposium digest · doi:10.1109/mwsym.1980.1124279 · Cited by 60
Loosely-coupled wireless power transfer: Physics, circuits, standards
Grajski, K. A., Tseng, R., & Wheatley, C. E. (2012) · IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications (IMWS-IWPT) · doi:10.1109/imws.2012.6215828 · Cited by 53
The Interaction Research of Smart Grid and EV Based Wireless Charging
Huang, X., Qiang, H., Huang, Z., Sun‡, Y., & Li, J. (2013) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2013.6671718 · Cited by 45
A Design Methodology for Flat Pick-up ICPT Systems
Elliott, G. A. J., Boys, J. T., & Covic, G. A. (2006) · 2006 1ST IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2006.257165 · Cited by 39
Design of a double coupled IPT EV highway
Nagendra, G. R., Boys, J. T., Covic, G. A., Riar, B., & Sondhi, A. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699878 · Cited by 36
Frequency agile resonance-based wireless charging system for Electric Vehicles
Krishnan, S., Bhuyan, S., Kumar, V. P., Wang, W., Afif, J. A., & Lim, K. S. (2012) · IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183212 · Cited by 31
ZVS frequency analysis of a current-fed resonant converter
Hu, A. P., Boys, J. T., & Covic, G. A. (2002) · doi:10.1109/ciep.2000.891417 · Cited by 29
An inverter system for inductive tube welding utilizing resonance transformation
Fischer, G. L., & Doht, H.-C. (2002) · Conference record · doi:10.1109/ias.1994.377515 · Cited by 25
Use of inductive power transfer for electric vehicles
Lukic, S. M., Saunders, M., Pantic, Z., Hung, S. N. B., & Taiber, J. G. (2010) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2010.5589673 · Cited by 17
Cited by
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Robust wireless power transfer using a nonlinear parity–time-symmetric circuit
Assawaworrarit, S., Yu, X., & Fan, S. (2017) · Nature · doi:10.1038/nature22404 · Cited by 812
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
“Thus, the transmitting pads are selectively excited based on the EV position such that the energized pads are covered by EV [27].”
BackgroundMethodInfluential
Metadata
- Authors
- Li, S., & Mi, C. C.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2015-03
- Volume
- 3
- Issue
- 1
- Pages
- 4-17
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2095356712
- Cited by
- 2,185
- References
- 91
- FWCI
- 64.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.