3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 901–1,000 of 1,006
Martinović, A., Mantovani, M., Trpchevska, N., Novak, E., Milev, N. B., Bode, L., Ewald, C. Y., Bischof, E. Y., Reichmuth, T., Lapides, R. A., et al. (2024) · Frontiers in Aging · doi:10.3389/fragi.2024.1495029 · Cited by 21
One-step bioprinting of endothelialized, self-supporting arterial and venous networks
Cai, B., Kilian, D., Ghorbani, S., Roth, J. G., Seymour, A. J., Brunel, L. G., Mejia, D. R., Rios, R. J., Szabo, I. M., Iranzo, S. C., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adab26 · Cited by 23
“While advancements in biofabrication have enabled the generation of increasingly complex, 3D branched structures [8–11, 13, 14], the endotheli-alization of these vascular-like networks is especially challenging, particularly for structures that include multiple channel diameters within a single…”
Innovative Approaches in Bone Tissue Engineering: Strategies for Cancer Treatment and Recovery
Khobragade, S., Deshmukh, M. P., VYAS, U. B., & Ingle, R. G. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26093937 · Cited by 22
“Three-dimensional printing technology, also known as additive manufacturing, uses computer-aided design (CAD) software to build 3D models, which are then utilized to manufacture functioning tissue structures with complicated geometries to repair or regenerate damaged tissues and organs [70–72].”
Stimuli-responsive hybrid materials for 4D in vitro tissue models
Aizarna‐Lopetegui, U., Bittinger, S. C., Álvarez, N., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102035 · Cited by 28
“…method to fabricate complex biological structures with soft proteins and polysaccharides by embedding such printed structures in temporary gelatin-based thermoreversible and biocompatible support baths, promoting the biofabrication of, among others, a full-size model of the human heart [121,124].”
Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization
Ramezani, H., Zhou, L., Shao, L., & He, Y. (2020) · Journal of Zhejiang University. Science A · doi:10.1631/jzus.a2000261 · Cited by 21
Liu, J., Zhu, X., Shen, Z., & Zhang, Y. (2021) · Acta Mechanica Sinica · doi:10.1007/s10409-021-01087-x · Cited by 20
Biofabrication of Collagen Tissue-Engineered Blood Vessels with Direct Co-Axial Extrusion
Bosch-Rué, È., Díez-Tercero, L., Delgado, L. M., & Pérez, R. A. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23105618 · Cited by 20
“One of them was gelatin microparticles, based on a previous study [19], to avoid its spreading after its extrusion.”
BackgroundMethodComplex architectural control of ice-templated collagen scaffolds using a predictive model
Cyr, J. A., Husmann, A., Best, S. M., & Cameron, R. E. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.09.034 · Cited by 21
Advances in Regenerative Medicine and Biomaterials
Şeker, Ş., Elçin, A. E., & Elçin, Y. M. (2022) · Methods in molecular biology · doi:10.1007/978-1-0716-2716-7_7 · Cited by 24
Research Progress of Three-Dimensional Bioprinting Artificial Cardiac Tissue
Mao, X., & Wang, Z. (2022) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-022-00495-9 · Cited by 20
Bar, A., Kryukov, O., Etzion, S., & Cohen, S. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.670 · Cited by 20
Nonplanar 3D Printing of Epoxy Using Freeform Reversible Embedding
Arun, N. D., Yang, H., Yao, L., & Feinberg, A. W. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201542 · Cited by 20
Self-citationPatient-specific 3D bioprinting for in situ tissue engineering and regenerative medicine
Akilbekova, D., & Turlybekuly, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00003-1 · Cited by 23
3D Bioprinting of Hyaline Cartilage Using Nasal Chondrocytes
Lan, X., Boluk, Y., & Adesida, A. B. (2023) · Annals of Biomedical Engineering · doi:10.1007/s10439-023-03176-3 · Cited by 22
Bioprinting of Cardiac Tissue in Space: Where Are We?
Tabury, K., Rehnberg, E., Baselet, B., Baatout, S., & Moroni, L. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203338 · Cited by 20
Merotto, E., Pavan, P. G., & Piccoli, M. (2023) · Biomedicines · doi:10.3390/biomedicines11061742 · Cited by 21
“However, collagen gelation is typically achieved using thermally driven self-assembly, which is difficult to control [154].”
BackgroundKhanna, A., Oropeza, B. P., & Huang, N. F. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37602 · Cited by 22
Ye, C., Yang, C., Zhang, H., Gao, R., Liao, Y., Zhang, Y., Jie, L., Zhang, Y., Cheng, T., Wang, Y., et al. (2024) · Cell stem cell · doi:10.1016/j.stem.2024.01.008 · Cited by 21
Fu, Z., Hai, N., Zhong, Y., & Sun, W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad30c3 · Cited by 20
“3D bioprinting has been widely used in a variety of applications such as regeneration and transplantation of tissues and organs [13–15], high throughput drug screening and testing [16, 17], and in vitro disease modeling [18–20].”
BackgroundInduced pluripotent stem cells in cartilage tissue engineering: a literature review
Owaidah, A. (2024) · Bioscience Reports · doi:10.1042/bsr20232102 · Cited by 21
Sadeghzade, S., Cao, J., Yang, R. J., Li, Y., Li, Y., Zhang, D., Liu, J., Yu, Z., Fang, L., & Yuan, H. (2024) · Giant · doi:10.1016/j.giant.2024.100280 · Cited by 20
3D Bioprinting of Liquid High‐Cell‐Proportion Bioinks in Liquid Granular Bath
Jiang, J., Yuan, C., Zhang, X., Gu, L., Yao, Y., Wang, X., He, Y., & Shao, L. (2024) · Advanced Materials · doi:10.1002/adma.202412127 · Cited by 25
Removal‐Free and Multicellular Suspension Bath‐Based 3D Bioprinting
Li, S., Li, J., Xu, J., Shen, Y., Shang, X., Li, H., Wang, J., Liu, Y., Qiang, L., Qiao, Z., et al. (2024) · Advanced Materials · doi:10.1002/adma.202406891 · Cited by 23
Zhao, Y. C., Wang, Z., Zhao, H., Yap, N. A., Wang, R., Cheng, W., Xu, X., & Ju, L. A. (2025) · ACS Sensors · doi:10.1021/acssensors.4c02764 · Cited by 21
Designing Biomaterial Platforms for Cardiac Tissue and Disease Modeling
House, A. A., Atalla, I., Lee, E. J., & Güvendiren, M. (2020) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000022 · Cited by 20
Tan, E. Y. S., Suntornnond, R., & Yeong, W. Y. (2020) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0153 · Cited by 20
“0 3D printing work, as given in Lee et al. , 26 our technique is similar to them, both methods use the principle of the model and support material interaction, but our method can perform on the solid platform directly.”
Gudapati, H., & Ozbolat, I. T. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02926 · Cited by 20
Anerillas, L. O., Kingham, P. J., Lammi, M. J., Wiberg, M., & Kelk, P. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222413594 · Cited by 21
“However, a number of new techniques, such as the freeform reversible embedding of suspended hydrogels (FRESH) method, have been used to address this problem [27].”
MethodMuneekaew, S., Wang, M., & Chen, S. ‐. (2022) · Scientific Reports · doi:10.1038/s41598-022-05888-3 · Cited by 21
Xu, H., Salazar, D. M. M., & Xu, C. (2022) · Machines · doi:10.3390/machines10050315 · Cited by 20
“Currently, the existing hydrogels can be mainly divided into two categories including natural hydrogels such as fibrin [6] and collagen [7], and synthetic hydrogels such as poly (ethylene glycol) (PEG) [8] and poly (lactic acid) (PLA) [9].”
BackgroundJúnior, O. B., Curylofo‐Zotti, F. A., dos Reis, M. C., Alania, Y., Lisboa‐Filho, P. N., & Bedran‐Russo, A. K. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01507 · Cited by 19
Embedded multimaterial bioprinting platform for biofabrication of biomimetic vascular structures
Dikyol, C., Altunbek, M., & Koç, B. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00254-x · Cited by 19
3D Bioprinting for Tumor Metastasis Research
Lin, M., Tang, M., Duan, W., Xia, S., Liu, W., & Wang, Q. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00239 · Cited by 19
Bini, F., D’Alessandro, S., Pica, A., Marinozzi, F., & Cidonio, G. (2023) · Biomimetics · doi:10.3390/biomimetics8020260 · Cited by 20
“4% [84] to reproduce the mechanical properties of the native tissue.”
BackgroundShen, Y., Cui, J., Xiao, Y., Song, J., Cai, P., Guo, W., Zhao, Y., Wu, J., Gu, H., Sun, B., et al. (2023) · Smart Materials in Medicine · doi:10.1016/j.smaim.2023.07.001 · Cited by 22
Pan, C., Xu, J., Gao, Q., Li, W., Sun, T., Lu, J., Shi, Q., Han, Y., Gao, G., & Li, J. (2023) · Biofabrication · doi:10.1088/1758-5090/aceffa · Cited by 19
Mai, S., & Inkielewicz‐Stępniak, I. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25021066 · Cited by 21
“Natural polymer-based bioinks such as agarose [71], alginate [72], collagen [73], hyaluronic acid [74], gelatin, and matrigel [75] are used for printing.”
MethodChen, Y., Le, Y., Yang, J., Yang, Y., Feng, X., Cai, J., Shang, Y., Sugiarto, S., Wei, Q., Kai, D., et al. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01636 · Cited by 19
Lai, G., & Meagher, L. (2024) · Biofabrication · doi:10.1088/1758-5090/ad39a8 · Cited by 21
“…Incompatible with printing at physiological temperature, batch-to-batch variance depending on the control in particle size and distribution [11, 18] Pluronic® F-127 Accurate control of temperature, 21 C distribution control, xanthan gum-gelatin composites are comprised of a blend of dissolved…”
BackgroundA Cell Pre‐Wrapping Seeding Technique for Hydrogel‐Based Tubular Organ‐On‐A‐Chip
Nie, J., Lou, S., Pollet, A. M. A. O., van Vegchel, M., Bouten, C. V. C., & den Toonder, J. M. J. (2024) · Advanced Science · doi:10.1002/advs.202400970 · Cited by 19
Qin, Y., Fan, L., Zhan, L., Sun, J., Liu, J., Gao, C., Ma, S., Pu, X., Zhao, L., Zheng, Y., et al. (2024) · Additive Manufacturing Frontiers · doi:10.1016/j.amf.2024.200175 · Cited by 22
Bakırcı, E., Adib, A. A., Ashraf, S. F., & Feinberg, A. W. (2025) · Biofabrication · doi:10.1088/1758-5090/adb7c3 · Cited by 21
“For example, while physical switching between extruders installed on the printer, such as multimaterial bioprinting of collagen and cell ink [16], has been carried out successfully, there remains a significant gap between the limited number of extruders available and the variety of cell/ECM bioinks…”
Self-citationHan, Y., Jia, X., Yang, Y., Guo, P., Li, C., Zhang, Y., Yin, L., Jia, B., & Wang, H. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101884 · Cited by 19
“This innovation is poised to transcend traditional repair methodologies, enhancing both treatment outcomes and the quality of life for patients [22,23].”
Materials and Microenvironments for Engineering the Intestinal Epithelium
Snyder, J. R., Wang, C.-M., Zhang, A. Q., Li, Y., Luchan, J., Hosic, S., Koppes, R. A., Carrier, R. L., & Koppes, A. N. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-020-02470-8 · Cited by 21
Three-dimensional bioprinting healthy and diseased models of the brain tissue using stem cells
Walus, K., Beyer, S., & Willerth, S. M. (2020) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.03.002 · Cited by 22
Building Organs Using Tissue-Specific Microenvironments: Perspectives from a Bioprosthetic Ovary
Henning, N. F. C., Jakus, A. E., & Laronda, M. M. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.01.008 · Cited by 21
Recent Trends in Biofabrication Technologies for Studying Skeletal Muscle Tissue-Related Diseases
Cho, S., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.782333 · Cited by 20
“Moreover, complex structures such as branched tubular networks and trileaflet heart valves have been fabricated using the FRESH method (Bhattacharjee et al., 2015; Lee et al., 2019).”
MethodSakai, S., Harada, R., & Kotani, T. (2021) · Biomolecules · doi:10.3390/biom11121908 · Cited by 20
3D-bioprinted microenvironments for sweat gland regeneration
Song, W., Yao, B., Zhu, D., Zhang, Y., Li, Z., Huang, S., & Fu, X. (2022) · Burns & Trauma · doi:10.1093/burnst/tkab044 · Cited by 19
“used freeform reversible embedding of suspended hydrogels to print collagen through 3D bioprinting to control the composition and structure accurately, and constructed a heart [32].”
Bioink derived from human placenta supporting angiogenesis
Duan, Y., Huang, W., Zhan, B., Li, Y., Xu, X., Li, K., Li, X., Liu, X., Ding, S., Wang, S., et al. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac7b5b · Cited by 19
“Recently, it has become possible to print complex structures with low concentrations of collagen using a suspension bath printing method [5, 67].”
BackgroundHigh Throughput Omnidirectional Printing of Tubular Microstructures from Elastomeric Polymers
Liu, C., Campbell, S., Li, J., Bannerman, D., Pascual‐Gil, S., Kieda, J., Wu, Q., Herman, P. R., & Radisic, M. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201346 · Cited by 22
Zhao, W., Hu, C., Xu, T., Lin, S., Wang, Z., & Zhu, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207496 · Cited by 19
Davis‐Hall, D., Thomas, E. E., Peña, B., & Magin, C. M. (2022) · Biofabrication · doi:10.1088/1758-5090/aca8cf · Cited by 20
“…in the polymer structure both mimic the microscale structure of the pulmonary arterial adventitia and provided a microenvironment amenable to cell infiltration and remodeling [48], especially in the presence of the MMP2-degradable peptide crosslinker employed in this hydrogel formulation.”
Bioinspired design of a tissue-engineered ray with machine learning
Zimmerman, J. F., Drennan, D. J., Ikeda, J., Jin, Q., Ardoña, H. A. M., Kim, S. L., Ishii, R., & Parker, K. K. (2025) · Science Robotics · doi:10.1126/scirobotics.adr6472 · Cited by 19
Comprehensive review of 3D/4D printing of soft materials, methods and applications
Abdullah, M. R., Peng, Z. G., Rajendren, V. B., Ahmad, F., Shah, S. S. A., Zia, A. W., Ali, A., Qiao, G., & Shehzad, K. (2025) · Applied Materials Today · doi:10.1016/j.apmt.2025.102667 · Cited by 26
O’Bryan, C. S., Rose, K. A., Ford, J., Ghoto, M. R., Lee, D., & Composto, R. J. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02784 · Cited by 18
Stable quantum dots/polymer matrix and their versatile 3D printing frameworks
Xu, R., Qiao, C., Xia, M., Bai, B., Li, Y., Liu, J., Liu, J., Rong, H., Xu, M. K., & Zhang, J. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc00861g · Cited by 18
Liao, Z., Niu, Y., Wang, Z., Chen, J., Sun, X., Dong, L., & Wang, C. (2022) · Advanced Science · doi:10.1002/advs.202203236 · Cited by 18
Volume adaptation of neonatal cardiomyocyte spheroids in 3D stiffness gradient GelMA
Chin, I. L., Amos, S. E., Jeong, J. H., Hool, L. C., Hwang, Y., & Choi, Y. S. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37456 · Cited by 18
Bridging the Gap in Ashby’s Map for Soft Material Properties for Tissue Engineering
Lou, L., Paolino, L., & Agarwal, A. K. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04331 · Cited by 18
Volumetric bioprinting strategies for creating large-scale tissues and organs
Kim, D. S., Kang, D., Kim, D., & Jang, J. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00541-4 · Cited by 18
Sacrificial scaffold-assisted direct ink writing of engineered aortic valve prostheses
Cheng, Z., Hao, J., Shi, W., Su, Y., Mitchell, K., Hua, W., Jin, W., Lee, S., Wen, L., Jin, Y., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/aceffb · Cited by 18
“For example, Lee et al [23] developed a method called freeform reversible embedding of suspended hydrogels, which is a support bath-assisted 3D printing strategy, to successfully fabricate trileaf-let valves from collagen.”
A brief review on the mechanisms and approaches of silk spinning-inspired biofabrication
Mu, X., Amouzandeh, R., Vogts, H., Luallen, E., & Arzani, M. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1252499 · Cited by 18
“In the absence of crosslinking chemicals and heating (Gantenbein et al., 2018; Lee et al., 2019), the mechanical performance, especially tensile strength and toughness, of the 3D-printed silk structures is comparable with or superior to most biopolymers (Mu et al.”
BackgroundAdvancements in robotic arm-based 3D bioprinting for biomedical applications
Li, K., Huang, W., Guo, H., Liu, Y., Chen, S., Liu, H., & Gu, Q. (2023) · Life Medicine · doi:10.1093/lifemedi/lnad046 · Cited by 18
Khiari, Z. (2024) · Marine Drugs · doi:10.3390/md22030134 · Cited by 21
“The collagen triple helix structure is stabilized by proline and hydroxyproline though hydrogen bonding which, in turn, restricts rotation [139,140].”
Bioprinting approaches in cardiac tissue engineering to reproduce blood-pumping heart function
Kim, M. J., Hwang, D. G., & Jang, J. (2024) · iScience · doi:10.1016/j.isci.2024.111664 · Cited by 22
“…al. 16 , Xu et al. 17 , and Zimmermann et al. 34 Bioprinting Noor et al. 21 , Finkel et al. 138 , 18 Melt Electrowriting Saidy et al. 148 Bioprinting Lee et al. 19 and Jafari et al. 149 Mimicking the macro-and micro-structure of the cardiac chamber to generate volumetric functions Uniaxial models…”
InfluentialThe Technique of Thyroid Cartilage Scaffold Support Formation for Extrusion-Based Bioprinting
Arguchinskaya, N. V., Beketov, E. E., Kisel, A. A., Isaeva, E. V., Osidak, E. O., Domogatsky, S. P., Mikhailovsky, N. V., Sevryukov, F. Е., Silantyeva, N. K., Agababyan, T. A., et al. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i2.348 · Cited by 18
“The method was later improved to ensure higher printing accuracy[21].”
MethodDigital Assembly of Spherical Viscoelastic Bio‐Ink Particles
Zhu, J., He, Y., Kong, L., He, Z., Kang, K. Y., Grady, S. P., Nguyen, L. Q., Chen, D., Wang, Y., Oberholzer, J., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109004 · Cited by 19
Cakal, S. D., Radeke, C., Alcala, J. F., Ellman, D. G., Butdayev, S., Andersen, D. C., Calløe, K., & Lind, J. U. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac6b71 · Cited by 19
“It offers unique opportunities for automated, multi-material micro-structuring of biomaterials [16, 17], soft instrumented tissue modelling devices [18], and bio-printing of cell-laden inks [19–23].”
BackgroundBiomaterials of human source for 3D printing strategies
Maia, J. R., Sobreiro‐Almeida, R., Cleymand, F., & Mano, J. F. (2023) · Journal of Physics Materials · doi:10.1088/2515-7639/acada1 · Cited by 18
Assessment of Cardiotoxicity With Stem Cell-based Strategies
Stoter, A. M. S., Hirt, M. N., Stenzig, J., & Weinberger, F. (2020) · Clinical Therapeutics · doi:10.1016/j.clinthera.2020.08.012 · Cited by 18
Integrating Additive and Traditional Manufacturing for Multiscale Bone Tissue Engineering Scaffolds
Zhu, Y., Gao, H., Qiao, Q., Yuan, Y., Fang, D., Bai, Y., & Jiang, Q. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16090349 · Cited by 17
Progressive Insights into 3D Bioprinting for Corneal Tissue Restoration
Namlı, İ., Gupta, D., Singh, Y. P., Datta, P., Rizwan, M., Baykara, M., & Ozbolat, I. T. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202503372 · Cited by 22
Granular Hydrogels as Modular Biomaterials: From Structural Design to Biological Responses
Vaziri, A., Maia, R., Zhang, P., Agresti, L., Sjollema, J., Shahbazi, M., & Santos, H. A. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502462 · Cited by 19
Concise review: Harnessing iPSC-derived cells for ischemic heart disease treatment
Duan, B. (2020) · Journal of Translational Internal Medicine · doi:10.2478/jtim-2020-0004 · Cited by 17
“[68] 3D printing/bioprinting has been used to fabricate contractile human cardiac ventricle constructs and even whole heart.[69,70]”
MethodNext-generation engineered microsystems for cell biology: a systems-level roadmap
Sundaram, S., & Chen, C. S. (2022) · Trends in Cell Biology · doi:10.1016/j.tcb.2022.01.003 · Cited by 20
“Anatomically faithful sections of the heart can be fabricated by printing collagen scaffolds alongside stem cell–derived cardiomyocytes [16].”
Wang, H., Hao, Y., Guo, K., Liu, L., Xia, B., Gao, X., Zheng, X., & Huang, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303505 · Cited by 19
Electrostatically Cross-Linked Bioinks for Jetting-Based Bioprinting of 3D Cell Cultures
Suwannakot, P., Zhu, L., Tolentino, M. A. K., Du, E. Y., Sexton, A., Myers, S., & Gooding, J. J. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00849 · Cited by 17
Cordova, D. J., Rodriguez, A. A., Woodward, S. C., & Crosby, C. O. (2024) · HardwareX · doi:10.1016/j.ohx.2024.e00510 · Cited by 17
“0), pioneered by Lee et al. [26].”
In‐Foam Bioprinting: An Embedded Bioprinting Technique with Self‐Removable Support Bath
Madadian, E., Ravanbakhsh, H., Touani, F. K., Rahimnejad, M., Lerouge, S., & Ahmadi, A. (2024) · Small Science · doi:10.1002/smsc.202300280 · Cited by 17
Precisely writing/printing hydrogel patterns on polymer surfaces
Yang, Z., Yan, X., Xu, B., Wang, Z., & Wang, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149851 · Cited by 19
FRESH-based 3D bioprinting of complex biological geometries using chitosan bioink
Chaurasia, P., Singh, R., & Mahto, S. K. (2024) · Biofabrication · doi:10.1088/1758-5090/ad5d18 · Cited by 17
“It has been previously shown that FRESH is a cell-compatible method of 3D bioprinting [13, 14].”
Yang, P., Xie, F., Zhu, L., Selvaraj, J. N., Zhang, D., & Cai, J. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37774 · Cited by 18
Multidirectional Filamented Light Biofabrication Creates Aligned and Contractile Cardiac Tissues
Jones, L. S., Filippi, M., Michelis, M. Y., Balciunaite, A., Yaşa, Ö., Aviel, G., Narciso, M., Freedrich, S., Generali, M., Tzahor, E., et al. (2024) · Advanced Science · doi:10.1002/advs.202404509 · Cited by 19
3D Printing of Proteins Via Temperature‐Dependent Amyloid Aggregation
Fu, C., Pang, Y., Zhang, J., Zhou, X., Liu, Y., Li, M., Song, J., Gao, Y., Wang, Z., Hu, B., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202420569 · Cited by 17
From lab to life: advances in in-situ bioprinting and bioink technology
Kumar, M. S., Varma, P., & Kandasubramanian, B. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad9dd0 · Cited by 17
“(Figure 5) This innovative approach opens up new possibilities in the field of in-situ bioprinting, where the printed tissue needs to adapt to the dynamic environment of the human body [115].”
Tamo, A. K., Doench, I., Roshanbinfar, K., Montembault, A., Serghei, A., Engel, F. B., & Osorio‐Madrazo, A. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.05.014 · Cited by 19
Growing silk fibroin in advanced materials for food security
Sun, H., & Marelli, B. (2021) · MRS Communications · doi:10.1557/s43579-020-00003-x · Cited by 17
Lagatuz, M., Vyas, R. J., Predovic, M., Lim, S., Jacobs, N. M., Martinho, M. J. S., Valizadegan, H., Kao, D., Oza, N. C., Theriot, C. A., et al. (2021) · Journal of Vascular Research · doi:10.1159/000514211 · Cited by 18
Xu, J., Gao, M., Feng, X., Su, Z. Z., Wang, K., Zhang, S., & Tan, J. (2021) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0203 · Cited by 17
Sharma, V., Manhas, A., Gupta, S., Dikshit, M., Jagavelu, K., & Verma, R. S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.10.079 · Cited by 17
3D (bio)printing of lungs: past, present, and future
Dabaghi, M., Carpio, M. B., Moran-Mirabal, J. M., & Hirota, J. A. (2022) · European Respiratory Journal · doi:10.1183/13993003.00417-2022 · Cited by 17
Direct ink write 3D printing of wave propagation sensor
Hassan, M. S., Zaman, S., Rodriguez, A. E., Molina, L., Dominguez, C. E., Morgan, R., Bernardin, J. D., & Lin, Y. (2022) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aca813 · Cited by 17
Zeng, J., Xie, Z., Dekishima, Y., Kuwagaki, S., Sakai, N., & Matsusaki, M. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300025 · Cited by 17
Alliance of Heart and Endoderm: Multilineage Organoids to Model Co-development
Ng, W. H., Varghese, B., Jia, H., & Ren, X. (2023) · Circulation Research · doi:10.1161/circresaha.122.321769 · Cited by 17
3D Bioprinting and Its Application to Military Medicine
Betz, J. F., Ho, V. B., & Gaston, J. D. (2020) · Military Medicine · doi:10.1093/milmed/usaa121 · Cited by 19
Sun, M., Cheng, J., Zhang, J., Wu, N., Zhao, F., Li, Z., Yu, H., Duan, X., Fu, X., Hu, X., et al. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00368 · Cited by 17
3D Biofabrication of Microporous Hydrogels for Tissue Engineering
Liu, Z., Wu, J., Luo, Z., Hou, Y., Xuan, L., Changyi, X., Chang, J., Zhang, D., Zheng, G., Guo, J., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403583 · Cited by 20
Integrating Engineered Living Materials with 3D Bioprinting
Moon, T. S., & Yum, K. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202500934 · Cited by 16
Khaled Wassif, R., Daihom, B. A., & Maniruzzaman, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124898 · Cited by 14
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.