3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 801–900 of 1,006
Growing Pains: The Need for Engineered Platforms to Study Growth Plate Biology
Tiffany, A. S., & Harley, B. A. C. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200471 · Cited by 25
Barreiro, D. L., Folch‐Fortuny, A., Muntz, I., Thies, J., Sagt, C. M. J., & Koenderink, G. H. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01405 · Cited by 25
“4 Structural proteins have inspired material scientists to manufacture multifunctional materials for fields including medicine, 5 energy harvesting, 6 and biosensing.”
3D bioprinting vascular networks in suspension baths
Li, S., Jin, J., Zhang, C., Yang, X., Liu, Y., Lei, P., & Hu, Y. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2022.101729 · Cited by 25
Keeping It Organized: Multicompartment Constructs to Mimic Tissue Heterogeneity
Sanchez-Rubio, A., Jayawarna, V., Maxwell, E., Dalby, M. J., & Salmerón‐Sánchez, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202110 · Cited by 26
Seguret, M., Davidson, P. M., Robben, S., Jouve, C., Pereira, C., Lelong, Q., Deshayes, L., Cerveau, C., Berre, M. L., Ribeiro, R. S. R., et al. (2024) · eLife · doi:10.7554/elife.87739 · Cited by 25
Loureiro, J., Miguel, S. P., Galván-Chacón, V., Patrocinio, D., Pagador, J. B., Sanchez-Margallo, F. M., Ribeiro, M. P., & Coutinho, P. (2023) · Polymers · doi:10.3390/polym15132824 · Cited by 27
“Some pioneering works have widely reported the use of printable biomaterials, as well as 3D printing approaches for the fabrication of functional living constructs with 3D customized architecture [24,25].”
BackgroundCardiac organoid: multiple construction approaches and potential applications
Yang, Z., Zhang, Y., Wang, J., Yin, J., Wang, Z., & Pei, R. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00783a · Cited by 26
Application of 4D printing and bioprinting in cardiovascular tissue engineering
Zhou, Z., Tang, W., Yang, J., & Fan, C. (2023) · Biomaterials Science · doi:10.1039/d3bm00312d · Cited by 25
Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review
Rosellini, E., Cascone, M. G., Guidi, L., Schubert, D. W., Roether, J. A., & Boccaccini, A. R. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1254739 · Cited by 27
Mousavi, A., Hedayatnia, A., Vliet, P. P. V., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., et al. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.102035 · Cited by 34
The microparticulate inks for bioprinting applications
An, C., Zhang, S., Xu, J., Zhang, Y., Dou, Z., Shao, F., Long, C., Yang, J., Wang, H., & Liu, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100930 · Cited by 29
“9B) [116].”
Porous Hydrogels for Immunomodulatory Applications
Wu, C., Zhang, H., Guo, Y., Sun, X., Hu, Z., Teng, L., & Zeng, Z. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25105152 · Cited by 26
“Therefore, gelatin microgels can be used as sacrificial templates, leading to porous hydrogels [55]. of microgel scaffolds using As shown in Figure 7a, Heilshorn et al. proposed a strategy to develop 3D printing of microgel scaffolds using sacrificial microgel templates that consisted of gelatin…”
Li, Y., Cheng, S., Shi, H., Yuan, R., Chen, G., Wang, Y., Zhang, Z., Deng, Z., & Huang, J. (2024) · Biofabrication · doi:10.1088/1758-5090/ad5b1b · Cited by 26
“Screening of UV light irradiation time 3D embedded bioprinting has been widely used to build models with complex structures, such as blood vessels [28], hearts [16] and ears [29].”
InfluentialLama, M., Fernandes, F. M., Marcellan, A., Peltzer, J., Trouillas, M., Banzet, S., Grosbot, M., Sánchez, C., Giraud‐Guille, M., Lataillade, J., et al. (2019) · Small · doi:10.1002/smll.201902224 · Cited by 25
Biofabrication strategies for engineering heterogeneous artificial tissues
Ambhorkar, P., Rakin, R. H., Wang, Z., Kumar, H., & Kim, K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101459 · Cited by 30
Engineering Biomaterials to Guide Heart Cells for Matured Cardiac Tissue
Jang, Y., Park, Y., & Kim, J. (2020) · Coatings · doi:10.3390/coatings10100925 · Cited by 26
“The merit of using collagen type I comes from its low immunogenicity [26] and the fact that it is also abundant and structurally important in various organs and structures in the body, including bone [27,28], cartilage [29,30], tendon [31,32], blood vessels [27,33], skin [34], the heart [35], and nerves [36,37].”
BackgroundStem Cells and Their Cardiac Derivatives for Cardiac Tissue Engineering and Regenerative Medicine
Roshanbinfar, K., Esser, T. U., & Engel, F. B. (2020) · Antioxidants and Redox Signaling · doi:10.1089/ars.2020.8193 · Cited by 25
“Another study printed a heart chamber from collagen utilizing rapid pH change to drive collagen self-assembly within a buffered support material (67).”
Fan, J., Ding, Z., Cai, Y., Lai, Y., Huang, C. B., Jiang, B., Zhou, Z., & Luo, Z. (2025) · Aggregate · doi:10.1002/agt2.731 · Cited by 33
Recent trends in embedded 3D bioprinting of vascularized tissue constructs
Cho, W.-W., Park, W., & Cho, D. (2025) · Biofabrication · doi:10.1088/1758-5090/adafdd · Cited by 25
“Lee et al utilized gelatin as a thermoreversible support bath material to fabricate cardiac tissue constructs using extrusion-based bioprinting technology [28].”
Dual crosslinkable bioink for direct and embedded 3D bioprinting at physiological temperature
Wang, Y., Yue, H., Liu, A., Cui, Y., Hou, Y., Ni, X., Pereira, R. F., Huang, B., Vyas, C., & Bártolo, P. (2025) · Materials Today · doi:10.1016/j.mattod.2025.02.005 · Cited by 26
Vascular microphysiological systems to model diseases
Zhang, Q., Zhang, X., & Truskey, G. A. (2020) · Cell and Gene Therapy Insights · doi:10.18609/cgti.2020.012 · Cited by 60
“With the Top-Down approach, the pattern or geometry of the vascular systems are designed and then manufactured by 3D-printing (49), mold degradation (50, 51) or multilayer chip (52).”
MethodMaterials for Dentoalveolar Bioprinting: Current State of the Art
Amoli, M. S., EzEldeen, M., Jacobs, R., & Bloemen, V. (2021) · Biomedicines · doi:10.3390/biomedicines10010071 · Cited by 25
“Through such modifications, collagen has been widely used in inkjet [88], extrusion-based [87], and laser-based [89] bioprinting for the regeneration of different tissues including skin [90], bone, cartilage [91], cardiovascular [92], liver [93] and nervous tissues [94], in addition to the dentoalveolar tissues.”
MethodSpatiotemporal T cell dynamics in a 3D bioprinted immunotherapy model
Morley, C. D., Flores, C., Drake, J., Moore, G. L., Mitchell, D. A., & Angelini, T. E. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00231 · Cited by 24
“…defined distributions of different cell types using 3D bioprinters to perform fundamental and applied research in new ways that may accelerate progress towards generating functional tissues [2,6, 7,10], contributing to efforts in regenerative medicine, pharmacology, and immunology [4,11,12].”
BackgroundPérez-Cortez, J. E., Sánchez-Rodríguez, V. H., Gallegos-Martínez, S., Chuck‐Hernández, C., Rodriguez, C. A., Álvarez, M. M., Santiago, G. T., Vázquez, E., & Martínez-López, J. I. (2022) · Micromachines · doi:10.3390/mi14010055 · Cited by 24
“EBB has contributed to regenerative medicine projects, such as those concerning printed heart valves [12,13], skin tissue [14–16], cartilage [17,18], and blood vessels [7,19].”
BackgroundGranular Ionogel Particle Inks for 3D Printed Tough and Stretchable Ionotronics
Yao, Y., Hui, Y., Wang, Z., Chen, H., Zhu, H., & Zhou, N. (2023) · Research · doi:10.34133/research.0104 · Cited by 24
Infantile hemangioma models: is the needle in a haystack?
Kong, M., Li, Y., Wang, K., Zhang, S., & Ji, Y. (2023) · Journal of Translational Medicine · doi:10.1186/s12967-023-04144-0 · Cited by 24
“This technology is better suited to support the growth and maturation of different cell types while preserving their overall cell diversity [140].”
Background3D-bioprinting of patient-derived cardiac tissue models for studying congenital heart disease
Wolfe, J. T., He, W., Kim, M.-S., Liang, H.-L., Shradhanjali, A., Jurkiewicz, H., Freudinger, B. P., Greene, A. S., LaDisa, J. F., Tayebi, L., et al. (2023) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2023.1162731 · Cited by 25
Wang, P., Li, J., Zhang, W., Ren, Y., Ma, J., Li, S., Tan, X., & Chi, B. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143892 · Cited by 28
Seymour, A. J., Kilian, D., Navarro, R. S., Hull, S. M., & Heilshorn, S. C. (2023) · Biomaterials Science · doi:10.1039/d3bm00721a · Cited by 24
Random cellulose acetate nanofibers: a breakthrough for cultivated meat production
dos Santos, A. E. A., Guadalupe, J. L., Albergaria, J. D. S., Almeida, I. A., Moreira, A. M. S., Copola, A. G. L., de Araújo, I. P., de Paula, A. M., Neves, B. R. A., Santos, J. P. F., et al. (2024) · Frontiers in Nutrition · doi:10.3389/fnut.2023.1297926 · Cited by 24
Utilizing bioprinting to engineer spatially organized tissues from the bottom-up
Zhan, Y., Jiang, W., Liu, Z., Wang, Z., Guo, K., & Sun, J. (2024) · Stem Cell Research & Therapy · doi:10.1186/s13287-024-03712-5 · Cited by 25
“The component of supporting bath can be crosslinking reagent solution, self-healing hydrogel, or oil phase [25, 70].”
BackgroundProgress of organoid platform in cardiovascular research
Du, X., Jia, H., Chang, Y., Zhao, Y., & Song, J. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.05.043 · Cited by 29
“Lee et al. proposed a free-form reversible embedding using suspended hydrogel (FRESH) to successfully print simulated ventricular and trilo-bal valves [75].”
BackgroundLiu, S., Chen, Y., Wang, Z., Liu, M., Zhao, Y., Tan, Y., Qu, Z., Du, L., & Wu, C. (2024) · MedComm · doi:10.1002/mco2.753 · Cited by 26
“17 Most importantly, bioprinting holds the potential to address the organ shortage by producing functional organs for transplantation, reducing the dependency on donor organs.”
BackgroundDeveloping 3D bioprinting for organs-on-chips
Wu, Z., Liu, R., Shao, N., & Zhao, Y. (2025) · Lab on a Chip · doi:10.1039/d4lc00769g · Cited by 24
Local governance and occupational choice among young people: First evidence from Vietnam
Tran, T. Q., Tran, A. L., Pham, T. M., & Vu, H. V. (2018) · Children and Youth Services Review · doi:10.1016/j.childyouth.2018.01.019 · Cited by 28
Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues
Gao, L., Ma, L., Yin, X., Luo, Y., Yang, H., & Zhang, B. (2020) · Small Methods · doi:10.1002/smtd.201900669 · Cited by 24
Yang, G., Mahadik, B. P., Choi, J. Y., Yu, J. R., Mollot, T., Jiang, B., He, X., & Fisher, J. P. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.040 · Cited by 25
“reported the utility of gelatin microparticles as a supporting bath for the printing of native, unmodified collagen with increased fidelity by an order of magnitude[31].”
BackgroundCamman, M., Joanne, P., Agbulut, O., & Hélary, C. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.040 · Cited by 29
Gibney, R., & Ferraris, E. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.786945 · Cited by 24
Design approaches for 3D cell culture and 3D bioprinting platforms
Sreepadmanabh, M., Arun, A. B., & Bhattacharjee, T. (2024) · Biophysics Reviews · doi:10.1063/5.0188268 · Cited by 23
Engineered heart tissue: Design considerations and the state of the art
Gokhan, I., Blum, T. S., & Campbell, S. G. (2024) · Biophysics Reviews · doi:10.1063/5.0202724 · Cited by 23
Extrusion bioprinting: meeting the promise of human tissue biofabrication?
Holland, I. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/adb254 · Cited by 26
“A further suspension bath bioprinting development is collagen printing [223], which as previously discussed is underused in extrusion bioprinting research.”
Microvascularization in 3D Human Engineered Tissue and Organoids
Shin, Y. J., Safina, D., Zheng, Y. Y., & Levenberg, S. (2025) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-103023-115236 · Cited by 25
Budharaju, H., Singh, R. K., & Kim, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.006 · Cited by 35
“Relatively, cardiac tissues exhibited a high degree of biomimicry and are able to mimic synchronized contraction, electro-physiological activity, and drug responses [108,144].”
Next generation bioprinting with artificial intelligence in the healthcare industry
Dhiman, B., Bammidi, R., Kumar, M., Rangappa, S. M., & Siengchin, S. (2026) · Next Bioengineering · doi:10.1016/j.nxbio.2026.100015 · Cited by 27
Zhang, P., Gao, Q., Yu, K., Yao, Y., & Lu, L. (2022) · Biomedicines · doi:10.3390/biomedicines10061233 · Cited by 26
“[18] adopted the collagen ink and a high-concentration cell ink to fabricate the components of the human heart.”
MethodDynamic mechanobiology of cardiac cells and tissues: Current status and future perspective
Wang, C., Ramahdita, G., Genin, G. M., Huebsch, N., & Ma, Z. (2023) · Biophysics Reviews · doi:10.1063/5.0141269 · Cited by 24
Ahn, S., Jain, A., Kasuba, K. C., Seimiya, M., Okamoto, R., Treutlein, B., & Müller, D. J. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122560 · Cited by 23
“We here report that 3D fibrillar FN matrices can act as a scaffold to induce the aligned fibrillar assembly of collagen I, which recapitulates the organization of collagen from large length scales ranging from the nanometer scale to more than tens of microns [64,65].”
3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity
Abaci, A., & Güvendiren, M. (2024) · Biofabrication · doi:10.1088/1758-5090/ad52f1 · Cited by 24
“The emergence of extrusion-based embedded three-dimensional (3D) bioprinting approach enabled fabrication of 3D complex geometries [6–10].”
MethodKoeck, K. S., Trossmann, V. T., & Scheibel, T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202407760 · Cited by 23
A high-throughput approach to compare the biocompatibility of candidate bioink formulations
Bedell, M. L., Melchiorri, A. J., Aleman, J., Skardal, A., & Mikos, A. G. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00068 · Cited by 24
3D Bioprinting and Translation of Beta Cell Replacement Therapies for Type 1 Diabetes
Gurlin, R. E., Giraldo, J. A., & Latres, E. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0192 · Cited by 26
“Today, bioprinting is a large and growing field with applications in the development of skin, 68 heart, 69 liver, 70 bone, and cartilage tissue, among others.”
Affordable, high-resolution bioprinting with embedded concentration gradients
Shen, E. M., & McCloskey, K. E. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00113 · Cited by 23
Haversian bone-mimicking bioceramic scaffolds enhancing MSC-macrophage osteo-imunomodulation
Zhang, B., Zhang, M., Sun, Y., Li, M., Han, F., & Wu, C. (2021) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2021.04.008 · Cited by 32
Zhang, W., Li, J., Zhou, J., Rastogi, A., & Ma, S. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.03.003 · Cited by 24
Reconstructing the pulmonary niche with stem cells: a lung story
Varghese, B., Ling, Z., & Ren, X. (2022) · Stem Cell Research & Therapy · doi:10.1186/s13287-022-02830-2 · Cited by 26
Multicellular 3D Models for the Study of Cardiac Fibrosis
Picchio, V., Floris, E., Derevyanchuk, Y., Cozzolino, C., Messina, E., Pagano, F., Chimenti, I., & Gaetani, R. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231911642 · Cited by 23
“Large components of cardiac tissues (such as tri-leaflet heart valves, or multiscale vasculature networks) can be produced rapidly and in significant numbers through 3D bioprinting based on bioinks composed of collagen and cardiac cell types, such as hESC-CMs or HUVECs [57] (Figure 2).”
BackgroundRecent Advances and Future Perspectives in Vascular Organoids and Vessel-on-Chip
Cheruku, G. R., Wilson, C. V., Raviendran, S., & Xiao, Q. (2024) · Organoids · doi:10.3390/organoids3030014 · Cited by 25
Hydrogels for Cardiac Tissue Regeneration: Current and Future Developments
Holme, S., Richardson, S. M., Bella, J., & Pinali, C. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26052309 · Cited by 24
“To allow for the observation of internal structures, they printed only half of the heart, showcasing intricate features such as trabeculae, atrial and ventricular chambers, and pulmonary and aortic valves [150].”
Hudson, A. R., Shiwarski, D. J., Kramer, A. J., & Feinberg, A. W. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c02169 · Cited by 23
“6,8,11 Research has demonstrated that a variety of fabrication techniques can be utilized to create porous constructs, each offering unique advantages.”
InfluentialSelf-citationClickable PEG-norbornene microgels support suspension bioprinting and microvascular assembly
Zhang, I. W., Choi, L. S., Friend, N. E., McCoy, A. J., Midekssa, F. S., Hu, M. M., Alsberg, E., Lesher‐Pérez, S. C., Stegemann, J. P., Baker, B. M., et al. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.06.006 · Cited by 23
Aftab, M., Ikram, S., Ullah, M., Khan, S. U., Wahab, A., & Naeem, M. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9080285 · Cited by 28
“However, the addition of living cells to these frameworks has significantly expanded the capabilities and applications of bioprinting, resulting in the development of scaffolds that can promote tissue growth and regeneration [8].”
Laser-assisted direct three-dimensional printing of free-standing thermoset devices
Zhuang, Q., Zhang, Y., Liu, X., Xiao, W., Chen, Z., Lu, L., Ding, Z., Chen, S., Chen, Q., Patel, S. B., et al. (2025) · Nature Electronics · doi:10.1038/s41928-025-01491-2 · Cited by 23
“A four-degree-of-freedom printing platform incorporating x , y , z and before solidification, for example), and another process is required to remove the supporting medium 47 .”
3D bioprinting of tissues and organs for systemic diseases and localized injuries
Ng, W. K., & Bártolo, P. (2026) · Military Medical Research · doi:10.1016/j.mmr.2026.100006 · Cited by 30
“Support baths also facilitate high-density cell printing (approximately 3.0×10 8 million cells/ml) and anisotropic tissue fabrication through shear-induced cell alignment [29].”
InfluentialMurphy, J. F., Mayourian, J., Stillitano, F., Munawar, S., Broughton, K. M., Agulló-Pascual, E., Sussman, M. A., Hajjar, R. J., Costa, K. D., & Turnbull, I. C. (2019) · Stem Cell Research & Therapy · doi:10.1186/s13287-019-1486-4 · Cited by 22
Silva, C., Cortés-Rodríguez, C. J., Hazur, J., Reakasame, S., & Boccaccini, A. R. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i4.282 · Cited by 24
“Despite the superior printing resolution achieved in constructs manufactured with this technique, results have not yet been reported when depositing cell-embedded hydrogels[3,14].”
ResultAllencherry, J., Pradeep, N., Shrivastava, R., Joy, L., Imbriacco, F., & Özel, T. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.06.064 · Cited by 22
Collagen composite inks for Aerosol Jet® printing in bone tissue engineering applications
Degryse, O., Bloemen, V., & Ferraris, E. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.06.033 · Cited by 23
Lan, X., Adesida, A. B., & Boluk, Y. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9b06 · Cited by 25
3D Bioprinting for Pancreas Engineering/Manufacturing
Xu, Y., Song, D., & Wang, X. (2022) · Polymers · doi:10.3390/polym14235143 · Cited by 22
“Currently, 3D bioprinting technologies have been successfully used to print many living tissues and organs [12], including blood vessels [50], skins [51], bones [52], cartilages [53], hearts [54], and livers [55].”
BackgroundNanobiotech engineering for future coral reefs
Roger, L. M., Lewinski, N. A., Putnam, H. M., Roxbury, D., Tresguerres, M., & Wangpraseurt, D. (2023) · One Earth · doi:10.1016/j.oneear.2023.05.008 · Cited by 23
Cui, H., Yu, Z., Huang, Y., Hann, S.-Y., Esworthy, T. J., Shen, Y.-L., & Zhang, L. G. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213579 · Cited by 22
Advancing cardiac regeneration through 3D bioprinting: methods, applications, and future directions
Zheng, Z., Tang, W., Li, Y., Ai, Y., Tu, Z., Yang, J., & Fan, C. (2023) · Heart Failure Reviews · doi:10.1007/s10741-023-10367-6 · Cited by 25
“0) [49].”
InfluentialInkjet printing-based high-throughput DNA synthesis
Deng, X. J., Li, H., & Song, Y. (2023) · Giant · doi:10.1016/j.giant.2023.100222 · Cited by 23
Kennedy, S. M., Amudhan, K., Britto, J. J. J., Ezhilmaran, V., & Robert, R. (2024) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2024.2399017 · Cited by 22
“…to accurately replicate patient-specific anatomical structure as measured by micro–ct. human cardio Myocytes were used to print cardiac ventricles, which displayed synchronised contractions, directed action potential propagation, and wall thickening of up to 14% during peak systole [43,44].”
3D Bioprinting of Thick Adipose Tissues with Integrated Vascular Hierarchies
Goldfracht, I., Machour, M., Michael, I., Bulatova, M., Zavin, J., & Levenberg, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410311 · Cited by 25
Pu, G., Song, J., Cheng, Z., Tang, Y., Kang, C., & Wang, J. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202500156 · Cited by 22
Engineering Heart Morphogenesis
Mandrycky, C., Williams, N. P., Batalov, I., El-nachef, D. O., de Bakker, B. S., Davis, J., Kim, D., DeForest, C. A., Zheng, Y. Y., Stevens, K. R., et al. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2020.01.006 · Cited by 23
Vascularization Strategies for Tissue Engineering for Tracheal Reconstruction
Sun, F., Lü, Y., Wang, Z., & Shi, H. (2021) · Regenerative Medicine · doi:10.2217/rme-2020-0091 · Cited by 23
3D Printing of Monolithic Proteinaceous Cantilevers Using Regenerated Silk Fibroin
Mu, X., González‐Obeso, C., Xia, Z., Sahoo, J. K., Li, G., Cebe, P., Zhang, Y. S., & Kaplan, D. L. (2022) · Molecules · doi:10.3390/molecules27072148 · Cited by 22
Zhang, B., Luo, Y., Zhou, X., Gao, L., Yin, X., & Yang, H. (2024) · APL Bioengineering · doi:10.1063/5.0182585 · Cited by 22
Zeng, Q., Yang, Y., Wang, H., Tan, Y., Wang, Z., Chai, M., Lu, Z., He, S., Yang, H., Zhang, J. Z., et al. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123573 · Cited by 24
Matavosian, A. A., & Bonassar, L. J. (2025) · Biofabrication · doi:10.1088/1758-5090/ae11d4 · Cited by 22
Jin, G. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27020694 · Cited by 23
“…including cyclic stretching, localized compression, or microscale deformation, providing precise mechanical cues for guided regeneration [106–109 Recent developments in 4D printing have produced hydrogels and shape-morphing scaffolds capable of dynamically regulating morphology and…”
Antheraea pernyi silk fibroin bioinks for digital light processing 3D printing
Zhang, X., Wu, W., Huang, Y., Yang, X., & Gou, M. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.760 · Cited by 22
Schot, M., Becker, M., Paggi, C. A., Gomes, F., Koch, T., Gensheimer, T., Johnbosco, C., Nogueira, L. P., van der Meer, A. D., Carlson, A., et al. (2023) · Advanced Materials · doi:10.1002/adma.202308949 · Cited by 24
Qiu, B., Wu, D., Xue, M., Ou, L., Zheng, Y., Xu, F., Jin, H., Gao, Q., Zhuang, J., Cen, J., et al. (2024) · Langmuir · doi:10.1021/acs.langmuir.3c03358 · Cited by 21
Dong, T., Hu, J. Q., Dong, Y., Yu, Z., Liu, C., Wang, G., & Chen, S. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.06.015 · Cited by 21
“These inks incorporated living cells [1,12], extracellular matrix (ECM) components [1,13], cellular mediators [14], and various additives [1,15], are all essential for creating viable tissue constructs.”
BackgroundBioinspired Printable Tough Adhesives with In Situ Benignly Triggered Mechanical Enhancements
Ma, Z., Huo, R., Nottegar, A., Chung‐Tze‐Cheong, C., Gao, Q., Lan, X., Gao, Z., & Li, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403290 · Cited by 21
A critical review on advances and challenges of bioprinted cardiac patches
Zhang, X., Zhao, G., Ma, T., Simmons, C. A., & Santerre, J. P. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.09.056 · Cited by 25
Harnessing native blueprints for designing bioinks to bioprint functional cardiac tissue
Akter, M. Z., Tufail, F., Ahmad, A., Oh, Y. W., Kim, J. M., Kim, S., Hasan, M. M., Li, L., Lee, D., Kim, Y. S., et al. (2025) · iScience · doi:10.1016/j.isci.2025.111882 · Cited by 22
“114,123 This method has the potential to fabricate complex structures with tunable mechanical properties and ensure high cell viability.”
InfluentialNonlinear Visco-Poroelasticity of Gels With Different Rheological Parts
He, D., & Hu, Y. (2020) · Journal of Applied Mechanics · doi:10.1115/1.4046966 · Cited by 21
Byl, J. L., Sholler, R., Gosnell, J. M., Samuel, B. P., & Vettukattil, J. J. (2020) · International journal of cardiac imaging · doi:10.1007/s10554-020-01853-1 · Cited by 21
Yong, U., Lee, S., Jung, S., & Jang, J. (2020) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/abb211 · Cited by 21
Cardiovascular microphysiological systems (CVMPS) for safety studies – a pharma perspective
Pointon, A., Maher, J. M., Davis, M., Baker, T. K., Cichocki, J. A., Ramsden, D., Hale, C. M., Kolaja, K. L., Lévesque, P., Sura, R., et al. (2021) · Lab on a Chip · doi:10.1039/d0lc01040e · Cited by 22
The Art of Engineering Biomimetic Cellular Microenvironments
Bretherton, R. C., & DeForest, C. A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01549 · Cited by 22
Minimalist Tissue Engineering Approaches Using Low Material‐Based Bioengineered Systems
Correia, C. R., Bjørge, I. M., Nadine, S., & Mano, J. F. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202002110 · Cited by 23
Xu, H., Salazar, D. M. M., Shahriar, M. A., & Xu, C. (2022) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4054640 · Cited by 21
3D printable sustainable hydrogel formulations for tissue engineering applications
Porwal, S., Sridhar, S. B., Talath, S., Wali, A. F., Warsi, M. H., & Malviya, R. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106308 · Cited by 22
3D Bioprinting in Cancer Modeling and Biomedicine: From Print Categories to Biological Applications
Yang, J., Wang, L., Wu, R., He, Y., Zhao, Y., Wang, W., Gao, X., Wang, D., Zhao, L., & Li, W. (2024) · ACS Omega · doi:10.1021/acsomega.4c06051 · Cited by 22
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.