3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 201–300 of 1,006
Recent Advances in Designing Electroconductive Biomaterials for Cardiac Tissue Engineering
Ghovvati, M., Kharaziha, M., Ardehali, R., & Annabi, N. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200055 · Cited by 107
3D Bioprinting Using Hydrogels: Cell Inks and Tissue Engineering Applications
Dell, A. C., Wagner, G. A., Own, J., & Geibel, J. P. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14122596 · Cited by 112
“The other subsections of this image show the wave propagation behavior that could be observed in the completed ventricle, including synchronized contractions, directional action potential propagation, and wall thickening behavior typical of a ventricle [61].”
BackgroundInfluentialYang, X., Ma, Y., Wang, X., Yuan, S., Huo, F., Yi, G., Zhang, J., Yang, B., & Tian, W. (2023) · Advanced Science · doi:10.1002/advs.202205041 · Cited by 91
Organ-on-a-chip systems for vascular biology
Mandrycky, C., Howard, C. C., Rayner, S. G., Shin, Y. J., & Zheng, Y. Y. (2021) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2021.06.002 · Cited by 106
Embedded extrusion printing in yield-stress-fluid baths
Wu, Q. H., Song, K., Zhang, D., Ren, B., Sole‐Gras, M., Huang, Y. H., & Yin, J. (2022) · Matter · doi:10.1016/j.matt.2022.09.003 · Cited by 107
A mini-review of embedded 3D printing: supporting media and strategies
Zhao, J., & He, N. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01819h · Cited by 103
3D bioprinting of complex tissues in vitro: state-of-the-art and future perspectives
Xiang, Y., Miller, K. L., Guan, J., Kiratitanaporn, W., Tang, M., & Chen, S. (2022) · Archives of Toxicology · doi:10.1007/s00204-021-03212-y · Cited by 105
Cellular and Engineered Organoids for Cardiovascular Models
Thomas, D., Choi, S., Alamana, C., Parker, K. K., & Wu, J. C. (2022) · Circulation Research · doi:10.1161/circresaha.122.320305 · Cited by 104
Neural modulation with photothermally active nanomaterials
Wang, Y., Garg, R., Cohen-Karni, D., & Cohen‐Karni, T. (2023) · Nature Reviews Bioengineering · doi:10.1038/s44222-023-00022-y · Cited by 104
Future trends of additive manufacturing in medical applications: An overview
Amaya, J., Segarra, B. S. P., Helguero, C. G., Hurel, J., Peralta, J., Flores, F. A., & Alvarado, J. D. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e26641 · Cited by 114
Programmable and contractile materials through cell encapsulation in fibrous hydrogel assemblies
Davidson, M. D., Prendergast, M. E., Ban, E., Xu, K. L., Mickel, G., Mensah, P., Dhand, A., Janmey, P. A., Shenoy, V. B., & Burdick, J. A. (2021) · Science Advances · doi:10.1126/sciadv.abi8157 · Cited by 101
Towards chamber specific heart-on-a-chip for drug testing applications
Zhao, Y., Rafatian, N., Wang, E. Y., Wu, Q., Lai, B. F. L., Lu, R. X., Savoji, H., & Radisic, M. (2020) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2019.12.002 · Cited by 97
3D Printing of Bioinspired Biomaterials for Tissue Regeneration
Li, T., Chang, J., Zhu, Y., & Wu, C. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000208 · Cited by 104
Mechanics of unusual soft network materials with rotatable structural nodes
Liu, J., Yan, D., & Zhang, Y. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.104210 · Cited by 102
3D Bioprinting using UNIversal Orthogonal Network (UNION) Bioinks
Hull, S. M., Lindsay, C. D., Brunel, L. G., Shiwarski, D. J., Tashman, J. W., Roth, J. G., Myung, D. J., Feinberg, A. W., & Heilshorn, S. C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007983 · Cited by 105
Self-citationTissue engineering applications of recombinant human collagen: a review of recent progress
Cao, L., Zhang, Z., Yuan, D., Yu, M., & Min, J. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1358246 · Cited by 106
Wu, Y., Wenger, A., Golzar, H., & Tang, X. (2020) · Scientific Reports · doi:10.1038/s41598-020-77146-3 · Cited by 94
Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 107
Programming hydrogels to probe spatiotemporal cell biology
Qazi, T. H., Blatchley, M. R., Davidson, M. D., Yavitt, F. M., Cooke, M. E., Anseth, K. S., & Burdick, J. A. (2022) · Cell stem cell · doi:10.1016/j.stem.2022.03.013 · Cited by 105
3D Bioprinting with Live Cells
Persaud, A., Maus, A., Strait, L., & Zhu, D. (2022) · Engineered Regeneration · doi:10.1016/j.engreg.2022.07.002 · Cited by 117
Ribezzi, D., Gueye, M., Florczak, S., Dusi, F., de Vos, D., Manente, F., Hierholzer, A., Fussenegger, M., Caiazzo, M., Blunk, T., et al. (2023) · Advanced Materials · doi:10.1002/adma.202301673 · Cited by 102
Wang, B., Díaz‐Payno, P. J., Browe, D. C., Freeman, F. E., Nulty, J. M., Burdis, R., & Kelly, D. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.04.016 · Cited by 101
Biomanufacturing human tissues via organ building blocks
Wolf, K. J., Weiss, J. D., Uzel, S. G. M., Skylar‐Scott, M. A., & Lewis, J. A. (2022) · Cell stem cell · doi:10.1016/j.stem.2022.04.012 · Cited by 102
Shi, W., Mirza, S., Kuss, M. A., Liu, B., Hartin, A., Wan, S., Kong, Y., Mohapatra, B. C., Krishnan, M. A., Band, H., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300905 · Cited by 102
3D Printed Conductive Nanocellulose Scaffolds for the Differentiation of Human Neuroblastoma Cells
Bordoni, M., Karabulut, E., Kuzmenko, V., Fantini, V., Pansarasa, O., Cereda, C., & Gatenholm, P. (2020) · Cells · doi:10.3390/cells9030682 · Cited by 100
Bertassoni, L. E. (2021) · Advanced Materials · doi:10.1002/adma.202101321 · Cited by 103
Carpio, M. B., Dabaghi, M., Ungureanu, J., Kolb, M. R. J., Hirota, J. A., & Moran-Mirabal, J. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.773511 · Cited by 101
“, 2019c), collagen (Kim, Lee, and Kim 2016; Lee et al., 2019; Guo et al., 2021), gelatin (Aljohani et al.”
BackgroundMethodInfluentialConvergence of 3D Bioprinting and Nanotechnology in Tissue Engineering Scaffolds
Zhang, S., Chen, X., Shan, M., Hao, Z., Zhang, X., Meng, L., Zhai, Z., Zhang, L., Liu, X., & Wang, X. S. (2023) · Biomimetics · doi:10.3390/biomimetics8010094 · Cited by 101
“In a recent report, an elliptical left ventricular model was printed by using a dual-material printing strategy [43].”
MethodComplex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 100
3D Modeling and Printing in Congenital Heart Surgery: Entering the Stage of Maturation
Yoo, S. J., Hussein, N., Peel, B., Coles, J. G., Arsdell, G. S. V., Honjo, O., Haller, C., Lam, C. Z., Seed, M., & Barron, D. J. (2021) · Frontiers in Pediatrics · doi:10.3389/fped.2021.621672 · Cited by 101
“human tissue with growth potential (6, 71, 72).”
BackgroundParihar, A., Pandita, V., Kumar, A., Parihar, D. S., Puranik, N., Bajpai, T., & Khan, R. (2021) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-021-00219-w · Cited by 100
Lee, C., Jeon, D., Ahn, J. M., & Kwon, O.-J. (2020) · Technovation · doi:10.1016/j.technovation.2020.102140 · Cited by 106
Wu, T., Gao, Y., Su, J. D., Tang, X., Chen, Q., Ma, L. W., Zhang, J., Wu, J., & Wang, S. X. (2021) · Climacteric · doi:10.1080/13697137.2021.1921726 · Cited by 95
Living Materials for Regenerative Medicine
Yu, Y., Wang, Q., Wang, C., & Shang, L. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.08.003 · Cited by 120
Murphy, C. A., Lim, K. S., & Woodfield, T. B. F. (2022) · Advanced Materials · doi:10.1002/adma.202107759 · Cited by 97
Yu, X., Li, G., Zheng, Y., Gao, J., Fu, Y., Wang, Q., Huang, L., Pan, X., & Ding, J. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac007 · Cited by 100
Huo, Y., Xu, Y. F., Wu, X., Gao, E., Zhan, A., Chen, Y., Zhang, Y., Hua, Y., Święszkowski, W., Zhang, Y. S., et al. (2022) · Advanced Science · doi:10.1002/advs.202202181 · Cited by 100
Mu, X., Fitzpatrick, V., & Kaplan, D. L. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901552 · Cited by 92
Freeform 3D printing using a continuous viscoelastic supporting matrix
Patrício, S. G., Sousa, L. R., Correia, T. R., Gaspar, V. M., Pires, L. S. O., Luís, J. L., Oliveira, J. M., & Mano, J. F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8bc3 · Cited by 95
“s–1 (ventricle) [11] for supramolecular hydrogels and jammed gelatin microparticles, respectively.”
BackgroundMethodInfluential3D-Printing Piezoelectric Composite with Honeycomb Structure for Ultrasonic Devices
Zeng, Y., Jiang, L., Sun, Y., Yang, Y., Quan, Y., Wei, S., Lu, G., Li, R., Rong, J., Chen, Y., et al. (2020) · Micromachines · doi:10.3390/mi11080713 · Cited by 93
Construction of tumor organoids and their application to cancer research and therapy
Lv, J., Du, X., Wang, M., Su, J., Wei, Y., & Xu, C. (2024) · Theranostics · doi:10.7150/thno.91362 · Cited by 95
“Collagen is the main ECM component of solid tumors, but low viscosity restricts its use in 3D bioprinting [96].”
BackgroundUtama, R. H., Atapattu, L., O’Mahony, A. P., Fife, C. M., Baek, J., Allard, T., O'Mahony, K. J., Ribeiro, J. C. C., Gaus, K., Kavallaris, M., et al. (2020) · iScience · doi:10.1016/j.isci.2020.101621 · Cited by 99
Advanced supramolecular design for direct ink writing of soft materials
Tang, M., Zhong, Z., & Ke, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01011a · Cited by 93
Sun, H. R., Yuan, J. Y., Dong, H., Dong, D., & Zheng, J. (2019) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2019.10.006 · Cited by 94
“Combining additive manufacturing with microfluidics: an emerging method for developing novel organs-on-chips Hao Sun1,2, Yuan Jia3, Hui Dong1,2, Dibo Dong4 and Jianping Zheng5 Available online at www.sciencedirect.com ScienceDirect Additive manufacturing (AM) or 3D printing is an ideal technology for building flexible…”
BackgroundMethodInfluentialTissue Engineering and Regenerative Medicine 2019: The Role of Biofabrication—A Year in Review
Ramos, T., & Moroni, L. (2020) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2019.0344 · Cited by 99
“45 One of the biggest advantages of the FRESH v2.”
Perfusion and endothelialization of engineered tissues with patterned vascular networks
Kinstlinger, I. S., Calderon, G. A., Royse, M. K., Means, A. K., Grigoryan, B., & Miller, J. S. (2021) · Nature Protocols · doi:10.1038/s41596-021-00533-1 · Cited by 95
Embedded bioprinting for designer 3D tissue constructs with complex structural organization
Zeng, X., Meng, Z., He, J., Mao, M., Li, X., Chen, P., Fan, J., & Li, D. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.11.048 · Cited by 95
Fang, Y., Guo, Y., Liu, T., Xu, R., Mao, S., Mo, X., Zhang, T., Ouyang, L., Xiong, Z., & Sun, W. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100011 · Cited by 117
Magnetically‐Assisted 3D Bioprinting of Anisotropic Tissue‐Mimetic Constructs
Pardo, A., Bakht, S. M., Gómez‐Florit, M., Rial, R., Monteiro, R. F., Teixeira, S. P. B., Taboada, P., Reis, R. L., Domingues, R. M. A., & Gomes, M. E. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202208940 · Cited by 93
3D bioprinting of multicellular scaffolds for osteochondral regeneration
Chen, Q., Ma, J., Chen, L., Ma, H., Zhuang, H., Zhang, M., Huan, Z., Chang, J., Ma, N., & Wu, C. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.016 · Cited by 93
Wu, C. A., Zhu, Y., & Woo, Y.-P. J. (2023) · Bioengineering · doi:10.3390/bioengineering10070842 · Cited by 101
3D Printed Integrated Sensors: From Fabrication to Applications—A Review
Hassan, M. S., Zaman, S., Dantzler, J. Z. R., Leyva, D. H., Mahmud, M. S., Ramirez, J. E. M., Gomez, S. G., & Lin, Y. (2023) · Nanomaterials · doi:10.3390/nano13243148 · Cited by 89
Aspiration-assisted bioprinting of co-cultured osteogenic spheroids for bone tissue engineering
Heo, D. N., Ayan, B., Dey, M., Banerjee, D., Wee, H., Lewis, G. S., & Ozbolat, I. T. (2020) · Biofabrication · doi:10.1088/1758-5090/abc1bf · Cited by 88
“In this regard, spheroids could be bioprinted into functional gels (such as fibrin deposited via droplet-based bioprinting) to form angiogenic capillary sprouts [24] and the mechanical strength could be increased by integrating the AAB process with other processes such as extrusion-based printing of polymers [47, 48].”
BackgroundCardiac organoid — a promising perspective of preclinical model
Zhao, D., Lei, W., & Hu, S. (2021) · Stem Cell Research & Therapy · doi:10.1186/s13287-021-02340-7 · Cited by 90
“Several attempts have led to successfully constructed cardiac organoids with carefully controlled biocompatible scaffolds designed to emulate organ complexity, including cell hydrogel matrices [32, 33], biomaterial-based micromolds [10, 34], and 3D-printed biomaterials [35, 36].”
BackgroundGeneration of human iPSCs derived heart organoids structurally and functionally similar to heart
Lee, S.-G., Kim, Y.-J., Son, M.-Y., Oh, M.-S., Kim, J., Ryu, B., Kang, K.-R., Baek, J., Chung, G., Woo, D. H., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121860 · Cited by 80
Vidler, C., Halwes, M. E., Kolesnik, K., Segeritz, P., Mail, M., Barlow, A. J., Koehl, E. M., Ramakrishnan, A., Aguilar, L. M. C., Nisbet, D. R., et al. (2024) · Nature · doi:10.1038/s41586-024-08077-6 · Cited by 92
3D Bioprinting: Challenges in Commercialization and Clinical Translation
Vijayavenkataraman, S. (2023) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2022-0026 · Cited by 88
A mechanical-assisted post-bioprinting strategy for challenging bone defects repair
Yang, J., Chen, Z., Gao, C., Liu, J., Liu, K., Wang, X., Pan, X., Wang, G., Sang, H., Pan, H., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-48023-8 · Cited by 89
“The emergence of three-dimensional (3D) bioprinting technology that can directly customize cell-laden constructs via mixing cells and biomaterials as bioinks provides new possibilities 16,17 .”
Engineered Living Systems Based on Gelatin: Design, Manufacturing, and Applications
Wang, Z., Lin, Z., Mei, X., Cai, L., Lin, K., Rodríguez, J. F., Ye, Z., Parraguez, X. S., Guajardo, E. M., Luna, P. C. G., et al. (2025) · Advanced Materials · doi:10.1002/adma.202416260 · Cited by 97
Yoo, J., Park, J. H., Kwon, Y. W., Chung, J. J., Choi, I. C., Nam, J. J., Lee, H. S., Jeon, E. Y., Lee, K., Kim, S. H., et al. (2020) · Biomaterials Science · doi:10.1039/d0bm00847h · Cited by 86
Microphysiological Systems: Design, Fabrication, and Applications
Wang, K., Man, K., Liu, J., Liu, Y., Chen, Q., Zhou, Y., & Yang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01667 · Cited by 90
Carotenuto, F., Politi, S., Haq, A. U., Matteis, F. D., Tamburri, E., Terranova, M. L., Teodori, L., Pasquo, A., & Nardo, P. D. (2022) · Micromachines · doi:10.3390/mi13050780 · Cited by 90
Instant assembly of collagen for tissue engineering and bioprinting
Gong, X., Wen, Z., Liang, Z., Xiao, H., Lee, S., Rossello‐Martinez, A., Xing, Q., Wright, T., Nguyen, R. Y., & Mak, M. (2025) · Nature Materials · doi:10.1038/s41563-025-02241-7 · Cited by 92
“4k and Supplementary Videos 7 and 8).”
Influential3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter
Abdollahi, S., Markvicka, E. J., Majidi, C., & Feinberg, A. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901735 · Cited by 82
Self-citationCollagen-Based Thiol–Norbornene Photoclick Bio-Ink with Excellent Bioactivity and Printability
Guo, K., Wang, H., Li, S., Zhang, H., Song, L., Zhu, H., Yang, Z., Zhang, L., Chang, P., & Zheng, X. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c16714 · Cited by 85
High-resolution projection-based 3D bioprinting
He, C., Qiao, T., Wang, G.-H., Sun, Y., & He, Y. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00218-w · Cited by 92
“15).”
Zhuang, R. Z., Lock, R., Liu, B., & Vunjak-Novakovic, G. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-022-00885-3 · Cited by 84
Bioprinting Neural Systems to Model Central Nervous System Diseases
Qiu, B., Bessler, N., Figler, K. P., Buchholz, M., Rios, A. C., Malda, J., Levato, R., & Caiazzo, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910250 · Cited by 86
Remote nongenetic optical modulation of neuronal activity using fuzzy graphene
Rastogi, S. K., Garg, R., Scopelliti, M. G., Pinto, B. I., Hartung, J., Kim, S., Murphey, C. G. E., Johnson, N. F., Roman, D. S., Bezanilla, F., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1919921117 · Cited by 85
“Moreover, this platform can be adapted to address challenges in tissue engineering by enabling noninvasive highprecision stimulation control of engineered tissues (61).”
BackgroundOrgan-on-a-chip platforms for evaluation of environmental nanoparticle toxicity
Lu, R. X. Z., & Radisic, M. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.01.021 · Cited by 94
3D Printing of Self‐Assembling Nanofibrous Multidomain Peptide Hydrogels
Farsheed, A. C., Thomas, A. J., Pogostin, B. H., & Hartgerink, J. D. (2023) · Advanced Materials · doi:10.1002/adma.202210378 · Cited by 85
Bioengineering approaches to treat the failing heart: from cell biology to 3D printing
Yadid, M., Oved, H., Silberman, E., & Dvir, T. (2022) · Nature Reviews Cardiology · doi:10.1038/s41569-021-00603-7 · Cited by 83
Cardiomyocyte Proliferation and Maturation: Two Sides of the Same Coin for Heart Regeneration
Zhao, M., Ye, S., Su, J., & Garg, V. (2020) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2020.594226 · Cited by 91
“Recent 3D heart printing and cardiac organoid technologies using iPSC-CMs have placed another hope for cardiac regeneration (Lee et al., 2019; Mills et al., 2019).”
BackgroundMultiphoton‐Guided Creation of Complex Organ‐Specific Microvasculature
Rayner, S. G., Howard, C. C., Mandrycky, C., Stamenković, S., Himmelfarb, J., Shih, A. Y., & Zheng, Y. Y. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100031 · Cited by 86
Design, fabrication and applications of soft network materials
Liu, J., Yan, D., Pang, W., & Zhang, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.05.007 · Cited by 84
High‐Definition Single‐Cell Printing: Cell‐by‐Cell Fabrication of Biological Structures
Zhang, P., & Abate, A. R. (2020) · Advanced Materials · doi:10.1002/adma.202005346 · Cited by 82
Tavafoghi, M., Darabi, M. A., Mahmoodi, M., Tutar, R., Xu, C., Mirjafari, A., Billi, F., Święszkowski, W., Nasrollahi, F., Ahadian, S., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0b9a · Cited by 85
“Several studies have reported the use of multi-nozzle microextrusion bioprinting for the 3D printing of soft tissues, such as the heart [30–32].”
Influential3D bioprinting strategy for engineering vascularized tissue models
Chae, S., Ha, D., & Lee, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.748 · Cited by 88
Sun, Z. (2020) · Biomolecules · doi:10.3390/biom10111577 · Cited by 84
Bioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 88
3D printing of cell-laden visible light curable glycol chitosan bioink for bone tissue engineering
Chang, H. K., Yang, D. H., Ha, M. Y., Kim, H. J., Kim, C. H., Kim, S. H., Choi, J. W., & Chun, H. J. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119328 · Cited by 84
Bioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models
Kim, S. J., Kim, M.-G., Kim, J., Jeon, J. S., Park, J., & Yi, H. (2023) · Cyborg and Bionic Systems · doi:10.34133/cbsystems.0043 · Cited by 83
The role of extracellular matrix in angiogenesis: Beyond adhesion and structure
Libby, J. R., Royce, H. A., Walker, S. R., & Li, L. (2024) · Biomaterials and Biosystems · doi:10.1016/j.bbiosy.2024.100097 · Cited by 97
The Epic of In Vitro Meat Production—A Fiction into Reality
Balasubramanian, B., Liu, W., Pushparaj, K., & Park, S. (2021) · Foods · doi:10.3390/foods10061395 · Cited by 80
“This can be resolved through 3DP through improving scaffolds (preferably hydrogel scaffolds), introducing multiple muscle types, and even producing functional organs in ex vivo conditions [93].”
BackgroundNanocomposite Bioprinting for Tissue Engineering Applications
Loukelis, K., Helal, Z. A., Mikos, A. G., & Chatzinikolaidou, Μ. (2023) · Gels · doi:10.3390/gels9020103 · Cited by 83
“Additionally, based on the physicochemical mechanisms that govern the deposition of the bioink molecules, 3D bioprinting could be divided into four categories: extrusion-based [20,21], inkjet-based [22,23], stereolithography (SLA)-based [24,25], and laser-assisted 3D bioprinting [26,27].”
Synergistic coupling between 3D bioprinting and vascularization strategies
Yeo, M., Sarkar, A., Singh, Y. P., Derman, İ. D., Datta, P., & Ozbolat, I. T. (2023) · Biofabrication · doi:10.1088/1758-5090/ad0b3f · Cited by 90
“In another study, 3D bioprinted collagen-based constructs were fabricated utilizing the FRESH approach to rebuild the components of heart [219].”
MethodOrganoid technology for tissue engineering
He, J., Zhang, X., Xia, X., Han, M., Li, F., Li, C., Li, Y., & Gao, D. (2020) · Journal of Molecular Cell Biology · doi:10.1093/jmcb/mjaa012 · Cited by 81
Hydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
Prospects and Challenges of Translational Corneal Bioprinting
Fuest, M., Yam, G. H., Mehta, J. S., & Campos, D. F. D. (2020) · Bioengineering · doi:10.3390/bioengineering7030071 · Cited by 78
“From these studies, two focused on the use of photopolymerizable gels [79,80], and the other two were compatible with natural, thermosensitive bioinks [81,82].”
BackgroundMethodChen, L., Zhang, Y., Ye, H., Duan, G., Duan, H., Ge, Q., & Wang, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02656 · Cited by 80
Stiffness control in dual color tomographic volumetric 3D printing
Wang, B., Engay, E. L., Stubbe, P. R., Moghaddam, S. Z., Thormann, E., Almdal, K., Islam, A., & Yang, Y. (2022) · Nature Communications · doi:10.1038/s41467-022-28013-4 · Cited by 80
Human Engineered Heart Tissue Models for Disease Modeling and Drug Discovery
Tani, H., & Tohyama, S. (2022) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2022.855763 · Cited by 83
4D printing of shape memory polymer via liquid crystal display (LCD) stereolithographic 3D printing
Shan, W., Chen, Y., Hu, M., Qin, S., & Liu, P. (2020) · Materials Research Express · doi:10.1088/2053-1591/abbd05 · Cited by 81
Digital Transformation in Materials Science: A Paradigm Change in Material's Development
Kimmig, J., Zechel, S., & Schubert, U. S. (2021) · Advanced Materials · doi:10.1002/adma.202004940 · Cited by 81
Ti 3 C 2 T x MXene Flakes for Optical Control of Neuronal Electrical Activity
Wang, Y., Garg, R., Hartung, J., Goad, A., Patel, D. A., Vitale, F., Gold, M. S., Gogotsi, Y. G., & Cohen‐Karni, T. (2021) · ACS Nano · doi:10.1021/acsnano.1c04431 · Cited by 76
Agarwal, T., Onesto, V., Banerjee, D., Guo, S., Polini, A., Vogt, C. D., Viswanath, A., Esworthy, T. J., Cui, H., O'Donnell, A., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/ade47a · Cited by 80
“…were fabricated with the FRESH bioprinting approach, using an acidified collagen I-based bioink (as well as other naturally derived bioinks), which was directly extruded into a buffered gelatin-microparticle support bath slurry, where the acidic bioink was neutralized and cross-linked [122].”
Direct 3D‐Bioprinting of hiPSC‐Derived Cardiomyocytes to Generate Functional Cardiac Tissues
Esser, T. U., Anspach, A., Muenzebrock, K. A., Kah, D., Schrüfer, S., Schenk, J., Heinze, K. G., Schubert, D. W., Fabry, B., & Engel, F. B. (2023) · Advanced Materials · doi:10.1002/adma.202305911 · Cited by 75
A thermo-responsive collagen-nanocellulose hydrogel for the growth of intestinal organoids
Curvello, R., Alves, D., Abud, H. E., & Garnier, G. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112051 · Cited by 73
FRESH 3D bioprinting a contractile heart tube using human stem cell-derived cardiomyocytes
Bliley, J. M., Tashman, J. W., Stang, M. A., Coffin, B. D., Shiwarski, D. J., Lee, A. R., Hinton, T. J., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac58be · Cited by 77
“Heart tubes were FRESH 3D bioprinted using acidified type I collagen bioink (24 mg ml − 1 ) using established meth-ods (figure 1(c)), where the printed collagen rapidly gels due to pH-driven neutralization by the buffered gelatin support bath [12].”
InfluentialSelf-citationThree‐dimensional printing: The potential technology widely used in medical fields
Li, H., Fan, W., & Zhu, X. M. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36979 · Cited by 79
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.