3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 501–600 of 1,006
Bakht, S. M., Gómez‐Florit, M., Lamers, T., Reis, R. L., Domingues, R. M. A., & Gomes, M. E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104245 · Cited by 47
Kovačević, B., Jones, M., Ionescu, C. M., Walker, D., Wagle, S. R., Chester, J., Foster, T., Brown, D. J., Mikov, M., Mooranian, A., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121459 · Cited by 46
Li, Y., & Li, B. (2022) · Oxford Open Materials Science · doi:10.1093/oxfmat/itac008 · Cited by 45
Construction of 3D bioprinting of HAP/collagen scaffold in gelation bath for bone tissue engineering
Chuang, G., Wu, J., Zeng, Y., & Li, H. (2023) · Regenerative Biomaterials · doi:10.1093/rb/rbad067 · Cited by 47
“Near recently, with its temperature-sensitive properties, a gelatin support bath has been proven to assist in the printing molding of collagen materials at room temperature [11, 31, 32], which may bring a possibility to bioprinting collagen hydrogel with cellladen at room temperature.”
BackgroundMethodOrganoid bioinks: construction and application
Wang, F., Song, P., Wang, J., Wang, S., Liu, Y., Bai, L., & Su, J. (2024) · Biofabrication · doi:10.1088/1758-5090/ad467c · Cited by 45
“For example, Lee et al [134] improved the reversible embedding suspension hydrogel bioprinting technique, using unmodified high-concentration collagen protein as the organoid bioink and extruding the organoid bioink in a thermally reversible supporting bath.”
MethodA FRESH Take on Resolution in 3D Bioprinting
Corbett, D. C., Olszewski, E., & Stevens, K. (2019) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.09.003 · Cited by 43
Chen, P., Xie, F., Tang, F., & McNally, T. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.004 · Cited by 45
“fibroin, collagen, and gelatin) have attracted huge interest in the development of materials for a wide range of applications from biomedical to pharmaceutical [1-6], in energy conversion and storage [7-10], electronic devices [11], for oil/water separation [12, 13], controlled fertiliser release [14, 15] and, for pac…”
BackgroundBioprinting of Cartilaginous Auricular Constructs Utilizing an Enzymatically Crosslinkable Bioink
Fisch, P., Broguière, N., Finkielsztein, S., Linder, T. E., & Zenobi‐Wong, M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008261 · Cited by 45
Ning, L., Zhu, N., Smith, A., Rajaram, A., Hou, H., Srinivasan, S., Mohabatpour, F., He, L., Mclnnes, A., Serpooshan, V., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02297 · Cited by 49
Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease
Sun, Z. (2023) · Children · doi:10.3390/children10020319 · Cited by 48
Intrinsically cryopreservable, bacteriostatic, durable glycerohydrogel inks for 3D bioprinting
Liu, M., Jiang, S., Witman, N., Wang, H., Wang, W., Fu, W., & You, Z. (2023) · Matter · doi:10.1016/j.matt.2022.12.013 · Cited by 44
Toward developing human organs via embryo models and chimeras
Wu, J., & Fu, J. (2024) · Cell · doi:10.1016/j.cell.2024.05.027 · Cited by 45
Chen, P., Xie, F., Tang, F., & McNally, T. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.04.259 · Cited by 44
Direct-ink-write printing of hydrogels using dilute inks
Li, X., Zhang, P., Li, Q., Wang, H., & Yang, C. (2021) · iScience · doi:10.1016/j.isci.2021.102319 · Cited by 46
Academic Insights and Perspectives in 3D Printing: A Bibliometric Review
Bai, W., Fang, H., Wang, Y., Zeng, Q., Hu, G., Bao, G., & Wan, Y. (2021) · Applied Sciences · doi:10.3390/app11188298 · Cited by 50
“…this technology is continuously expanding into areas such as automotive [5–7], aerospace [8–10], electronic [11–13], medicine [14–16], biology [17–19], architecture [20–22], sports [23,24], toy industries [25–27], food supply chains [28–30], agriculture [31], earth science [32] and robotics…”
Cardiac Organoids: A 3D Technology for Modeling Heart Development and Disease
Zhu, L., Liu, K. Y., Feng, Q., & Liao, Y. (2022) · Stem Cell Reviews and Reports · doi:10.1007/s12015-022-10385-1 · Cited by 44
A handheld bioprinter for multi-material printing of complex constructs
Pagan, E., Stefanek, E., Seyfoori, A., Razzaghi, M., Chehri, B., Mousavi, A., Arnaldi, P., Ajji, Z., Dartora, D. R., Dabiri, S. M. H., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acc42c · Cited by 43
Soft Hydrogel Shapeability via Supportive Bath Matching in Embedded 3D Printing
Lei, I. M., Zhang, D., Gu, W., Liu, J., Zi, Y., & Huang, Y. Y. S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300001 · Cited by 47
Manufacturing and validation of small-diameter vascular grafts: A mini review
Hernandez‐Sanchez, D., Comtois‐Bona, M., Muñoz, M. A., Ruel, M., Suuronen, E. J., & Alarcon, E. I. (2024) · iScience · doi:10.1016/j.isci.2024.109845 · Cited by 43
“59”
MethodXu, F., Jin, H., Liu, L., Yang, Y., Cen, J., Wu, Y., Chen, S., & Sun, D. (2024) · Microsystems & Nanoengineering · doi:10.1038/s41378-024-00692-7 · Cited by 45
“Lee et al. presented a method to print collagen by embedding suspended hydrogel in a freeform reversible manner to engineer components of the human heart at various scales, from capillaries to the full organ 13 .”
MethodOrr, A., Kalantarnia, F., Nazir, S., Bolandi, B., Alderson, D., O’Grady, K., Hoorfar, M., Julian, L. M., & Willerth, S. M. (2025) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2025.115524 · Cited by 45
Engineering Tissue Fabrication With Machine Intelligence: Generating a Blueprint for Regeneration
Kim, J., McKee, J. A., Fontenot, J. J., & Jung, J. P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00443 · Cited by 47
Fracture of tough and stiff metallosupramolecular hydrogels
Zheng, S. Y., Yu, H. C., Yang, C., Hong, W., Zhu, F., Qian, J. W., Wu, Z. L., & Zheng, Q. (2020) · Materials Today Physics · doi:10.1016/j.mtphys.2020.100202 · Cited by 44
Ooms, J. F., Wang, D. D., Rajani, R., Redwood, S. R., Little, S. H., Chuang, M. L., Popma, J. J., Dahle, G., Pfeiffer, M. P., Kanda, B., et al. (2021) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2020.12.034 · Cited by 43
“Although the recreation of a fully functioning, patient-specific, biological 3D print of the heart is somewhat futuristic at this point, progress has been made on separate parts (61,62).”
BackgroundTo infinity and beyond: Strategies for fabricating medicines in outer space
Seoane‐Viaño, I., Ong, J. J., Basit, A. W., & Goyanes, Á. (2022) · International Journal of Pharmaceutics X · doi:10.1016/j.ijpx.2022.100121 · Cited by 52
“, 2018) and even organs (Lee et al., 2019) and functional living structures (Duraj-Thatte et al.”
BackgroundNavara, A. M., Kim, Y. S., Xu, Y., Crafton, C. L., Diba, M., Guo, J. L., & Mikos, A. G. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.016 · Cited by 46
“These G values are higher than other materials used for support bath extrusion printing [18,20], although any changes in support offered from such differences would need to be studied in greater detail.”
BackgroundReynolds, D. S., de Lázaro, I., Blache, M. L., Liu, Y., Jeffreys, N. C., Doolittle, R. M., Grandidier, E., Olszewski, J. D., Dacus, M. T., Mooney, D. J., et al. (2023) · Advanced Materials · doi:10.1002/adma.202210748 · Cited by 44
Wang, X., Wang, M., Xu, Y., Yin, J., & Hu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131980 · Cited by 46
Ribezzi, D., Zegwaart, J., Gansbeke, T. V., Tejo‐Otero, A., Florczak, S., Aerts, J., Delrot, P., Hierholzer, A., Fussenegger, M., Malda, J., et al. (2025) · Advanced Materials · doi:10.1002/adma.202409355 · Cited by 42
Advanced bioprinting strategies for fabrication of biomimetic tissues and organs
Ng, W. L., Vyas, C., Huang, B., Yeong, W. Y., & Bártolo, P. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/adeee0 · Cited by 43
3D-bioprinted HepaRG cultures as a model for testing long term aflatoxin B1 toxicity in vitro
Schmidt, K., Berg, J., Roehrs, V., Kurreck, J., & Al-Zeer, M. A. (2020) · Toxicology Reports · doi:10.1016/j.toxrep.2020.11.003 · Cited by 42
“Both natural and synthetic polymers, such as collagen [12], gelatin [13], and alginate [14] etc. , are used extensively to fabricate scaffolds for 3D model printing due to on their biocompatibility, printability and biodegradability properties [15].”
Background3D Scaffolds to Model the Hematopoietic Stem Cell Niche: Applications and Perspectives
Congrains, A., Bianco, J., Rosa, R. G., Mancuso, R. I., & Saad, S. T. O. (2021) · Materials · doi:10.3390/ma14030569 · Cited by 44
Human iPSCs and Genome Editing Technologies for Precision Cardiovascular Tissue Engineering
Gähwiler, E. K. N., Motta, S. E., Martin, M., Nugraha, B., Hoerstrup, S. P., & Emmert, M. Y. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.639699 · Cited by 44
3D bioprinting: novel approaches for engineering complex human tissue equivalents and drug testing
Hagenbuchner, J., Nothdurfter, D., & Ausserlechner, M. J. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200153 · Cited by 42
3D bioprinting for the repair of articular cartilage and osteochondral tissue
Chartrain, N. A., Gilchrist, K. H., Ho, V. B., & Klarmann, G. J. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00239 · Cited by 43
FRESH bioprinting of biodegradable chitosan thermosensitive hydrogels
Rahimnejad, M., Adoungotchodo, A., Demarquette, N. R., & Lerouge, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00209 · Cited by 42
“Storage moduli of FRESH support should vary between 5,000 Pa to 10,000 Pa, to provide adequate support for a low viscosity ink and yet allow its penetration [11, 14, 17, 18].”
BackgroundKhanna, A., Ayan, B., Undieh, A. A., Yang, Y., & Huang, N. F. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.04.017 · Cited by 42
Parihar, A., Pandita, V., & Khan, R. (2022) · Biotechnology and Bioengineering · doi:10.1002/bit.28166 · Cited by 41
“3D bioprinting has been used to create centimeter‐level intestine organoids, which is a significant step toward overcoming the constraints of traditional 3D culture scales (Brassard et al., 2021; A. Lee et al., 2019).”
MethodReizabal, A., Costa, C. M., Pérez‐Álvarez, L., Vilas‐Vilela, J. L., & Lanceros-Méndez, S. (2023) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2023.2250425 · Cited by 42
Advances in Three Dimensional Bioprinting for Wound Healing: A Comprehensive Review
Umur, E., Bayrak, E., Arslan, F., Bulut, S. B., Baysoy, E., Kaleli‐Can, G., & Ayan, B. (2023) · Applied Sciences · doi:10.3390/app131810269 · Cited by 43
“During this observation, the flow rate through the leaflets was measured and showed <15% backflow (regurgitation) with a maximum open area of 19.5% [211].”
BackgroundMethodInfluentialBiopolymers for Tissue Engineering: Crosslinking, Printing Techniques, and Applications
Patrocinio, D., Galván-Chacón, V., Gómez-Blanco, J. C., Miguel, S. P., Loureiro, J., Ribeiro, M. P., Coutinho, P., Pagador, J. B., & Sanchez-Margallo, F. M. (2023) · Gels · doi:10.3390/gels9110890 · Cited by 44
Advances in 3D Bioprinted Cardiac Tissue Using Stem Cell-Derived Cardiomyocytes
Bliley, J. M., Stang, M. A., Behre, A., & Feinberg, A. W. (2024) · Stem Cells Translational Medicine · doi:10.1093/stcltm/szae014 · Cited by 44
“5,26 Second, 3D bioprinting can achieve spatial control through deposition of different cellular inks into discrete locations, such as segregation of endothelial cells within the coronary vasculature of the heart and cardiomyocytes within the myocardium (Fig.”
BackgroundSelf-citationAdvancements in Tissue Engineering: A Review of Bioprinting Techniques, Scaffolds, and Bioinks
Zoghi, S. (2024) · Biomedical Engineering and Computational Biology · doi:10.1177/11795972241288099 · Cited by 51
“79,80 Techniques like using meth-acrylated gelatin with collagen or rapid pH changes for collagen self-assembly enhance the capability of bioprinting complex structures.”
BackgroundMethodDirect ink writing of aerogels: Fundamentals, strategies, applications, and perspectives
Yang, J., Lu, J., Han, D., Zhou, B., & Du, A. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101462 · Cited by 41
Engineering anisotropic 3D tubular tissues with flexible thermoresponsive nanofabricated substrates
Williams, N. P., Rhodehamel, M., Yan, C., Smith, A. S. T., Jiao, A., Murry, C. E., Scatena, M., & Kim, D. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.119856 · Cited by 41
He, H., Li, D., Lin, Z., Peng, L., Yang, J., Wu, M., Cheng, D., Pan, H., & Ruan, C. (2020) · Biofabrication · doi:10.1088/1758-5090/ab9906 · Cited by 41
3D printing low-stiffness silicone within a curable support matrix
Greenwood, T. E., Hatch, S. E., Colton, M. B., & Thomson, S. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101681 · Cited by 51
Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues
Dikyol, C., Altunbek, M., Bártolo, P., & Koç, B. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00159 · Cited by 41
Immune response against the biomaterials used in 3D bioprinting of organs
Elalouf, A. (2021) · Transplant Immunology · doi:10.1016/j.trim.2021.101446 · Cited by 43
Rapid Formation of Multicellular Spheroids in Boundary‐Driven Acoustic Microstreams
Rasouli, R., & Tabrizian, M. (2021) · Small · doi:10.1002/smll.202101931 · Cited by 42
Gerdes, S., Ramesh, S., Mostafavi, A., Tamayol, A., Rivero, I. V., & Rao, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00598 · Cited by 43
Bioprinting of Cartilage with Bioink Based on High-Concentration Collagen and Chondrocytes
Beketov, E. E., Isaeva, E. V., Yakovleva, N. D., Demyashkin, G. A., Arguchinskaya, N. V., Kisel, A. A., Lagoda, T. S., Malakhov, E. P., Kharlov, V. I., Osidak, E. O., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222111351 · Cited by 41
Liu, Y., Zhang, Y., An, Z., Zhao, H., Zhang, L., Cao, Y., Mansoorianfar, M., Liu, X., & Pei, R. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01052 · Cited by 43
Chae, S., Choi, Y., & Cho, D. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4fb6 · Cited by 41
“Several bath printing methods, including microgel, slurry, and viscous solutions, have been developed, enabling free-form fabrication using low viscosity bioink with a complex geometry in a supporting bath [38, 39].”
Chen, Y.-S., Ng, H. Y., Chen, Y., Cho, D., Ho, C., Chen, C., Chiu, S., Jhong, Y.-R., & Shie, M. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213276 · Cited by 44
Fang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
3D-Printed Collagen-Based Waveform Microfibrous Scaffold for Periodontal Ligament Reconstruction
Lin, H.-H., Chao, P. G., Tai, W., & Chang, P. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22147725 · Cited by 41
“Although 3D printing technology appeared as an alternative to conventional scaffold fabrication, it is still challenging to print collagen due to the difficulty in preventing denaturation and scaffold collapse [19].”
BackgroundMethodStrategies for development of synthetic heart valve tissue engineering scaffolds
Snyder, Y., & Jana, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101173 · Cited by 42
Liu, H., Xing, F., Yu, P., Zhe, M., Duan, X., Liu, M., Xiang, Z., & Ritz, U. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131623 · Cited by 46
Chen, C., Chang, Z., Yao, B., Liu, X., Zhang, X., Liang, J., Wang, J., Bao, S., Chen, M., Zhu, P., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.05.026 · Cited by 40
“Collagen, a primary component of the natural extracellular matrix (ECM), is favored for constructing biomimetic neural microenvironments due to its specific functional peptide sequences that enhance cell adhesion, growth, and differentiation [40 – 42].”
BackgroundFreeze-FRESH: A 3D Printing Technique to Produce Biomaterial Scaffolds with Hierarchical Porosity
Wang, Z., & Florczyk, S. J. (2020) · Materials · doi:10.3390/ma13020354 · Cited by 43
“A 3DP technique called freeform reversible embedding of suspended hydrogels (FRESH) utilized a gelatin support bath to encapsulate printed hydrogel structures [13,14], while a similar 3DP technique utilized a Carbopol ETD 2020 polymer support bath [11].”
MethodInducing Endogenous Cardiac Regeneration: Can Biomaterials Connect the Dots?
Bar, A., & Cohen, S. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00126 · Cited by 42
Application of Collagen I and IV in Bioengineering Transparent Ocular Tissues
Song, Y., Overmass, M., Fan, J., Hodge, C., Sutton, G. L., Lovicu, F. J., & You, J. (2021) · Frontiers in Surgery · doi:10.3389/fsurg.2021.639500 · Cited by 44
“This technique has already been used to print a range of human tissue including artificial human corneal stroma and heart tissues (158, 159).”
MethodDip-Printed Microneedle Motors for Oral Macromolecule Delivery
Zhang, X., Chen, G., Cai, L., Lü, F., & Zhao, Y. (2022) · Research · doi:10.34133/2022/9797482 · Cited by 41
Roato, I., Masante, B., Putame, G., Massai, D., & Mussano, F. D. (2022) · Nanomaterials · doi:10.3390/nano12213878 · Cited by 45
“FRESH allowed the printing of collagen parts of human hearts with a satisfactory resolution (20–200 μm) [90].”
BackgroundAssociative Liquid‐In‐Liquid 3D Printing Techniques for Freeform Fabrication of Soft Matter
Honaryar, H., Amirfattahi, S., & Niroobakhsh, Z. (2023) · Small · doi:10.1002/smll.202206524 · Cited by 41
Application of three-dimensional (3D) bioprinting in anti-cancer therapy
Wu, B., Wu, Z. Q., Hou, Y.-Y., Fang, Z.-X., Deng, Y., Wu, H.-T., & Liu, J. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e20475 · Cited by 44
“…drugs, decellularized ECM scaffolds, simple 3D printed tissues, and 3D printed lungs, heart valves, skin, ear cartilage, and other organs [44 – 46], and 3D bioprinting is predicted to clinical translation within the next decade [47], which will bring improvements to patients ’ conditions and…”
Background3D bioprinted liver tissue and disease models: Current advances and future perspectives
Sun, L., Wang, Y., Zhang, S., Yang, H., & Mao, Y. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213499 · Cited by 40
Gelation of Uniform Interfacial Diffusant in Embedded 3D Printing
Shin, S., Brunel, L. G., Cai, B., Kilian, D., Roth, J. G., Seymour, A. J., & Heilshorn, S. C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202307435 · Cited by 40
Biomedical potential of hydrogels: a multifaceted approach to innovative medication delivery
Selvaraj, S., Dutta, V., Chandrasekaran, G., Subbarayan, R., Rana, G., Radhakrishnan, A., Elango, A., & Chauhan, A. (2024) · Emergent Materials · doi:10.1007/s42247-024-00643-y · Cited by 39
“The objective of this approach is to facilitate the production of human heart components with varying dimensions [130].”
Hwang, D. G., Choi, H., Yong, U., Kim, D., Kang, W., Park, S., & Jang, J. (2024) · Advanced Materials · doi:10.1002/adma.202400364 · Cited by 43
Son, J., Li, S., & Jeong, W. (2025) · Gels · doi:10.3390/gels11080636 · Cited by 42
“Using this method, researchers have fabricated coronary-artery-like networks with tortuous geometries and multilevel branches that remain perfusable by blood analogs [155].”
Tissue engineering: Hydrogel scaffolds and mechanical properties as key design parameters
Goswami, A. K., Giduturi, V. K., Yerramilli, S. N., Chauhan, V. S., & Yadav, N. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103691 · Cited by 48
Microfluidic-assisted bioprinting of tissues and organoids at high cell concentrations
Serex, L., Sharma, K., Rizov, V., Bertsch, A., McKinney, J. D., & Renaud, P. (2021) · Biofabrication · doi:10.1088/1758-5090/abca80 · Cited by 39
“To date, only a small number of studies demonstrating successful bioprinting at high cell concentrations have been published [17–19].”
Controlling Surface-Induced Platelet Activation by Agarose and Gelatin-Based Hydrogel Films
Apte, G., Lindenbauer, A., Schemberg, J., Rothe, H., & Nguyen, T. (2021) · ACS Omega · doi:10.1021/acsomega.1c00764 · Cited by 42
Green composites in bone tissue engineering
Jouyandeh, M., Vahabi, H., Rabiee, N., Rabiee, M., Bagherzadeh, M., & Saeb, M. R. (2021) · Emergent Materials · doi:10.1007/s42247-021-00276-5 · Cited by 40
Resolution of 3D bioprinting inside bulk gel and granular gel baths
Xie, Z., Kang, D., & Matsusaki, M. (2021) · Soft Matter · doi:10.1039/d1sm00926e · Cited by 41
Evolution of 3D bioprinting-from the perspectives of bioprinting companies
Ke, D., Niu, C., & Yang, X. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00193 · Cited by 42
Cell sedimentation during 3D bioprinting: a mini review
Xu, H., Liu, J., Zhang, Z., & Xu, C. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00183-6 · Cited by 39
“Naturally derived polymers (such as alginate [20], fibrin [21], and collagen [22]) and synthetic polymers (such as polyethylene glycol (PEG) [23] and gelatin methacrylate (GelMA) [24]) have been widely utilized in 3D bioprinting to mimic the natural extracellular matrix (ECM).”
BackgroundMethods for biomaterials printing: A short review and perspective
Shokrani, H., Shokrani, A., & Saeb, M. R. (2022) · Methods · doi:10.1016/j.ymeth.2022.07.016 · Cited by 39
Liu, S., Kilian, D., Ahlfeld, T., Hu, Q., & Gelinsky, M. (2023) · Biofabrication · doi:10.1088/1758-5090/acb8dc · Cited by 41
In situ 3D bioprinting: a promising technique in advanced biofabrication strategies
Mahmoudi, Z., Sedighi, M., Jafari, A., Naghieh, S., Stefanek, E., Akbari, M., & Savoji, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00260 · Cited by 38
Post‐Maturation Reinforcement of 3D‐Printed Vascularized Cardiac Tissues
Silberman, E., Oved, H., Namestnikov, M., Shapira, A., & Dvir, T. (2023) · Advanced Materials · doi:10.1002/adma.202302229 · Cited by 43
FRESH™ 3D bioprinted cardiac tissue, a bioengineered platform for in vitro pharmacology
Finkel, S., Sweet, S., Locke, T., Smith, S., Wang, Z., Sandini, C., Imredy, J. P., He, Y., Durante, M. R., Lagrutta, A., et al. (2023) · APL Bioengineering · doi:10.1063/5.0163363 · Cited by 41
“…of heart disease associated with aging also have the potential to be replicated; in the case of FRESH TM 3D bioprinting, the reported ability to print collagen 30 could be used to develop late-stage cardiac fibrosis models through multi-material printing and parametric design based on histology.”
BackgroundMethodInfluentialSelf-citationChiticaru, E. A., & Ioniţă, M. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101341 · Cited by 38
Fast 3D printing of fine, continuous, and soft fibers via embedded solvent exchange
Eom, W., Hossain, M. T., Parasramka, V., Kim, J., Siu, R., Sanders, K. A., Piorkowski, D., Lowe, A., Koh, H. G., Volder, M. F. L. D., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-55972-1 · Cited by 39
“Materials such as Alginate 68 , GelMA 69,70 , PVA 27,33 , Pluronic 26 , Collagen 34,71 , and Silicone elastomer 32,72 have previously been printed, exhibiting feature diameters ranging from 200 to 10 µ m (summarized in Table S2).”
Kim, M. S., Choi, Y., & Lee, K. Y. (2025) · Polymers · doi:10.3390/polym17172337 · Cited by 39
“This refinement allowed for the precise fabrication of neonatal-scale ventricles and patient-specific heart valves, capturing fine anatomical details and significantly advancing efforts toward creating clinically viable cardiac constructs (Figure 4a) [9].”
InfluentialEngberg, A., Stelzl, C., Eriksson, O., O’Callaghan, P., & Kreuger, J. (2021) · Scientific Reports · doi:10.1038/s41598-021-00931-1 · Cited by 39
Fabrication of 3D GelMA Scaffolds Using Agarose Microgel Embedded Printing
Yang, B., Liu, T., Gao, G., Zhang, X., & Wu, B. (2022) · Micromachines · doi:10.3390/mi13030469 · Cited by 39
“Adam Feinberg a used mechanical force to pulverize gelatin into irregular particles as a support material and developed a technique called “FRESH” printing [12,15,16].”
MethodMesenchymal Stem/Stromal Cells in Organ Transplantation
Deo, D. D., Marchioni, M. A., & Rao, P. N. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14040791 · Cited by 41
“The synchronous beating of the cells is soon observed and the scaffold is then ready for implantation [145].”
Background3D printed tissue models: From hydrogels to biomedical applications
Cadamuro, F., Nicotra, F., & Russo, L. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.01.048 · Cited by 38
Global hotspots and emerging trends in 3D bioprinting research
Ding, Z., Tang, N., Huang, J., Cao, X., & Wu, S. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1169893 · Cited by 39
“In 2019, (Lee et al. 2019) proposed a method named FRESH (Freeform Reversible Embedding of Suspended Hydrogels) to 3D bioprint collagen, and used this method to construct heart tissue with patient-specific anatomical structures.”
BackgroundMethodMaturing differentiated human pluripotent stem cells in vitro: methods and challenges
Ottaviani, D., ter Huurne, M., Elliott, D. A., Bellin, M., & Mummery, C. L. (2023) · Development · doi:10.1242/dev.201103 · Cited by 38
Engineering Cardiac Tissue for Advanced Heart‐On‐A‐Chip Platforms
Chen, X., Liu, S., Han, M., Long, M., Li, T., Hu, L., Wang, L., Huang, W., & Wu, Y. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301338 · Cited by 38
Transparent and Cell-Guiding Cellulose Nanofiber 3D Printing Bioinks
Radeke, C., Pons, R., Mihajlovic, M., Knudsen, J. R., Butdayev, S., Kempen, P. J., Segeritz, C., Andresen, T. L., Pehmøller, C. K., Jensen, T. E., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16126 · Cited by 37
Fibrin–Dextran Hydrogels with Tunable Porosity and Mechanical Properties
Jung, S. A., Malyaran, H., Demco, D. E., Manukanc, A., Häser, L. S., Kučikas, V., van Zandvoort, M. A. M. J., Neuß, S., & Pich, A. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00269 · Cited by 37
Recent Advances in the Modification and Improvement of Bioprosthetic Heart Valves
Tong, Q., Cai, J., Wang, Z., Sun, Y., Liang, X., Xu, Q., Mahamoud, O. A., Qian, Y., & Qian, Z. (2024) · Small · doi:10.1002/smll.202309844 · Cited by 38
Jiang, Z., Jin, B., Liang, Z., Wang, Y., Ren, S., Huang, Y., Li, C., Sun, H., Li, Y., Liu, L., et al. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122681 · Cited by 39
Yang, X., Yao, L., Sun, X., Wang, L., & Xiao, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155650 · Cited by 38
Thiol-ene click chemistry: Enabling 3D printing of natural-based inks for biomedical applications
Malafaia, A. P., Sobreiro‐Almeida, R., Rodrigues, J. M. M., & Mano, J. F. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214105 · Cited by 39
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.