3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 601–700 of 1,006
Decellularized Cell‐Secreted Extracellular Matrices as Biomaterials for Tissue Engineering
Ramos‐Rodriguez, D. H., & Leach, J. K. (2024) · Small Science · doi:10.1002/smsc.202400335 · Cited by 38
Advances in cardiac organoid research: implications for cardiovascular disease treatment
Huang, Z., Jia, K., Tan, Y., Yang, Y. P., Xiao, W., Zhou, X., Yi, J., & Zhang, C. (2025) · Cardiovascular Diabetology · doi:10.1186/s12933-025-02598-8 · Cited by 40
Evolving biomaterials design from trial and error to intelligent innovation
Hang, R., Yao, X., Bai, L., & Hang, R. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.013 · Cited by 40
Recent Trends and Future Directions in 3D Printing of Biocompatible Polymers
Aftab, M., Ikram, S., Ullah, M., Khan, N., Naeem, M., Khan, M. A., o’g’li, R. B. B., Qizi, K. S. S., Ugli, O. O. E., Abdurasulovna, B. M., et al. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9040129 · Cited by 61
“Collagen bioink was used to reinforce the outside and interior walls to maintain their intended geometric shape and provide adequate structural support (Figure 4) [73].”
Liu, Y.-Y., & Echeverry‐Rendón, M. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.100647 · Cited by 49
3D micro-organisation printing of mammalian cells to generate biological tissues
Jeffries, G. D. M., Xu, S., Lobovkina, T., Kirejev, V., Tusseau, F., Gyllensten, C., Singh, A. K., Karila, P., Moll, L., & Orwar, O. (2020) · Scientific Reports · doi:10.1038/s41598-020-74191-w · Cited by 38
Lin, H. P., McBride, K. L., Garg, V., & Zhao, M. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.630069 · Cited by 37
Engineering Three-Dimensional Vascularized Cardiac Tissues
Williams, M. A. C., Mair, D. B., Lee, W., Lee, E., & Kim, D. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0343 · Cited by 39
“0 printed construct based on MRI-derived CAD rendering of the left anterior descending artery with computationally generated microvasculature capable of perfusion.(145) (F) FRESH v2.”
InfluentialHughes, A. M., Kolb, A. D., Shupp, A. B., Shine, K. M., & Bussard, K. M. (2021) · Cancers · doi:10.3390/cancers13030507 · Cited by 37
“A suspension-based 3D bioprinting technique, known as freeform reversible embedding of suspended hydrogels (FRESH), allows for the printing of soft hydrogels in a support bath of a thermoreversible gel that can be subsequently melted away, as depicted in Figure 4 [195].”
BackgroundMethodNian, S., Zhu, J., Zhang, H., Gong, Z., Freychet, G., Zhernenkov, M., Xu, B., & Cai, L. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c04659 · Cited by 40
Heterotypic tumor models through freeform printing into photostabilized granular microgels
Molley, T. G., Jalandhra, G. K., Nemec, S. R., Tiffany, A. S., Patkunarajah, A., Poole, K., Harley, B. A. C., Hung, T., & Kilian, K. A. (2021) · Biomaterials Science · doi:10.1039/d1bm00574j · Cited by 37
Nguyen, N., Thurgood, P., Sekar, N. C., Chen, S., Pirogova, E., Peter, K., Baratchi, S., & Khoshmanesh, K. (2021) · Biophysical Reviews · doi:10.1007/s12551-021-00815-8 · Cited by 39
Biomacromolecule-based agent for high-precision light-based 3D hydrogel bioprinting
Ma, Y., Wei, W., Gong, L., Li, C., Hong, Y., Wang, X., Liang, R., Shao, Q., Liang, Q., Huang, W., et al. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100985 · Cited by 38
Bioprinted Membranes for Corneal Tissue Engineering: A Review
Salehi, A. O. M., Keshel, S. H., Poursamar, S. A., Zarrabi, A., Sefat, F., Mamidi, N., Behrouz, M. J., & Rafienia, M. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14122797 · Cited by 37
“Another study which was designed in the reverse order, in comparison to SWIFT, utilized freeform reversible embedding of suspended hydrogels (FRESH), supporting the 3D printed structure during the process which revealed positive results after 14 days of cell seeding [108].”
BackgroundResultWang, P., Sun, L., Li, C., Jin, B., Yang, H., Wu, B., & Mao, Y. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.694 · Cited by 38
Hao, L., Tao, X., Feng, M., Zhou, K., He, Y., Yang, J., Mao, H., & Gu, Z. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00688 · Cited by 37
Rütsche, D., Nanni, M., Rüdisser, S., Biedermann, T., & Zenobi‐Wong, M. (2023) · Advanced Materials · doi:10.1002/adma.202209476 · Cited by 38
Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Quevedo‐Moreno, D. A., Chávez-Madero, C., Velásquez‐Marín, S., Lam‐Aguilar, L. L., Solís‐Pérez, Ó. E., Cantoral‐Sánchez, A., Neher, M., Yzar-Garcia, E., et al. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202202208 · Cited by 41
Diffusion‐Based 3D Bioprinting Strategies
Cai, B., Kilian, D., Mejia, D. R., Rios, R. J., Ali, A., & Heilshorn, S. C. (2023) · Advanced Science · doi:10.1002/advs.202306470 · Cited by 40
Vernon, M. J., Mela, P., Dilley, R. J., Jansen, S. J., Doyle, B. J., Ihdayhid, A. R., & De‐Juan‐Pardo, E. M. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2023.11.001 · Cited by 38
Mei, T., Cao, H., Zhang, L., Cao, Y., Ma, T., Sun, Z., Liu, Z., Hu, Y., & Le, W. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01837 · Cited by 36
Kim, D. H., Han, S. G., Lim, S.-J., Hong, S. J., Kwon, H.-C., Jung, H. S., & Han, S. G. (2024) · Food Science of Animal Resources · doi:10.5851/kosfa.2024.e46 · Cited by 36
“Despite their benefits, hydrogels have inherent limitations, such as restricted diffusion of nutrients and gases, and limited mechanical strength and rigidity when employed as scaffolds (Lee et al., 2019; Levato et al., 2020).”
BackgroundVyas, J., Raytthatha, N., Vyas, P., Prajapati, B. G., Uttayarat, P., Singh, S. K., & Chittasupho, C. (2025) · Polymers · doi:10.3390/polym17081090 · Cited by 37
“Notable advancements in 3DP have been made across various organs including the heart [153], kidney , liver [154], and lungs [155].”
Using decellularized grafted leaves as tissue engineering scaffolds for mammalian cells
Wang, Y., Dominko, T., & Weathers, P. J. (2020) · In Vitro Cellular & Developmental Biology - Plant · doi:10.1007/s11627-020-10077-w · Cited by 39
“However, even with recent advances in the fabrication of engineered bioscaffolds, such as three-dimensional printing (3DP) (Grigoryan et al. 2019; Lee et al. 2019), it is still * Pamela J.”
BackgroundExtracellular matrix grafts: From preparation to application (Review)
Jiang, Y., Li, R., Han, C., & Huang, L. (2020) · International Journal of Molecular Medicine · doi:10.3892/ijmm.2020.4818 · Cited by 36
“Lee and colleagues constructed a highly accurate human heart model which enabled rapid cellular infiltration and microvascularization using the freeform reversible embedding of suspended hydrogels via 3d-bioprinting technique (66).”
BackgroundFarhat, J., Pandey, I., & Alwahsh, M. (2021) · Cells · doi:10.3390/cells10071657 · Cited by 36
“Inflammatory response occurrence is associated mainly with collagen, gelatin, alginate, and agarose polymers [71].”
Background3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 38
Kang, B., Park, Y., Hwang, D. G., Kim, D., Yong, U., Lim, K. S., & Jang, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202100947 · Cited by 37
One-Step FRESH Bioprinting of Low-Viscosity Silk Fibroin Inks
Sakai, S., & Morita, T. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00269 · Cited by 36
Photo-responsive hydrogel-based re-programmable metamaterials
Patel, H., Chen, J., Hu, Y., & Ertürk, A. (2022) · Scientific Reports · doi:10.1038/s41598-022-15453-7 · Cited by 36
Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions
Sun, Z., Zhao, J., Leung, E. W., Flandes‐Iparraguirre, M., Vernon, M. J., Silberstein, J., De‐Juan‐Pardo, E. M., & Jansen, S. J. (2023) · Biomolecules · doi:10.3390/biom13081180 · Cited by 37
“This allowed them to bioprint an anatomically accurate, miniaturized heart (20 × 18 mm) (Figure 14 [149].”
InfluentialRETRACTED: Embedded Sensors with 3D Printing Technology: Review
Bas, J., Dutta, T., Llamas‐Garro, I., Velázquez-González, J. S., Dubey, R., & Mishra, S. K. (2024) · Sensors · doi:10.3390/s24061955 · Cited by 36
RetractedRevolutionizing nephrology research: expanding horizons with kidney-on-a-chip and beyond
Huang, W., Chen, Y., He, F.-F., & Zhang, C. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1373386 · Cited by 36
Recent advances in 3D bioprinting of tissues and organs for transplantation and drug screening
Sun, X., Ren, W., Xie, L., Ren, Q., Zhu, Z., Jia, Q., Jiang, W., Jin, Z., & Yu, Y. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2384662 · Cited by 36
“Collagen is the main structural protein of the ECM, a polymer naturally present in the ECM that undergoes simple crosslinking through a heat-induced gelation reaction under physiological conditions [112-114].”
Advances in 3D food printing technology: innovation and applications in the food industry
Rinshana, P. F., Murugesan, B., Kim, Y. H., Alaguthevar, R., & Rhim, J. (2025) · Food Science and Biotechnology · doi:10.1007/s10068-024-01779-7 · Cited by 36
“Although natural extracellular matrix (ECM) production is limited, it can sufficiently produce various types of 3D bioinks, including alginate, collagen, gelatin, GelMA, and poly-N-acryloyl glycinamide (PNAGA) (Erdem et al., 2020; Jia et al., 2014; Lee et al., 2019; Osidak et al., 2020).”
From biomimicry to bioelectronics: Smart materials for cardiac tissue engineering
Bolonduro, O. A., Duffy, B. M., Rao, A. A., Black, L. D., & Timko, B. P. (2020) · Nano Research · doi:10.1007/s12274-020-2682-3 · Cited by 36
“Complex collagen structures have been achieved by freeform reversible embedding of suspended hydrogels (FRESH) [110].”
BackgroundInfluentialPreliminary investigation on a new natural based poly(gamma‐glutamic acid)/Chitosan bioink
Pisani, S., Dorati, R., Scocozza, F., Mariotti, C. E., Chiesa, E., Bruni, G., Genta, I., Auricchio, F., Conti, M., & Conti, B. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34602 · Cited by 35
Wang, H., Guo, K., Zhang, L., Zhu, H., Li, S., Li, S., Gao, F., Liu, X., Gu, Q., Liu, L., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/abdb86 · Cited by 35
“At present, extrusion bioprinting is the most widely used, mainly because it is relatively easy to achieve the multimaterial distribution of biomaterial inks with a wide range of viscosity [2, 16, 17].”
Engineering and Assessing Cardiac Tissue Complexity
Tadevosyan, K., Iglesias‐García, O., Mazo, M. M., Prósper, F., & Raya, Á. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031479 · Cited by 36
“These engineered tissues displayed synchronized functional activity [204].”
BackgroundDani, S., Ahlfeld, T., Albrecht, F. B., Duin, S., Kluger, P. J., Lode, A., & Gelinsky, M. (2021) · Gels · doi:10.3390/gels7040227 · Cited by 35
“Other bioinks of low viscosity take usage of support baths, which are sacrificed during post-processing [5,6].”
BackgroundComputer vision-aided bioprinting for bone research
Liu, C., Wang, L., Lü, W., Liu, J., Yang, C., Fan, C., Li, Q., & Tang, Y. (2022) · Bone Research · doi:10.1038/s41413-022-00192-2 · Cited by 37
“Lee and McBeth ’ s research studies 11,23 both show that the accuracy and resolution of bioprinting have a substantial impact on the feasibility and quality of printing components, which also play a signi fi cant role in bone cell growth, bone cell division, and bone cell differentiation.”
BackgroundStocco, T. D., Silva, M. C. M., Corat, M. A. F., Lima, G. G., & Lobo, A. O. (2022) · International Journal of Nanomedicine · doi:10.2147/ijn.s353937 · Cited by 35
A versatile embedding medium for freeform bioprinting with multi-crosslinking methods
Li, Q., Jiang, Z., Ma, L., Yin, J., Gao, Z., Shen, L., Yang, H., Cui, Z., Ye, H., & Zhou, H. (2022) · Biofabrication · doi:10.1088/1758-5090/ac7909 · Cited by 35
“Amid the granular mediums, the Car-bopol [8, 26–28], gelatin microparticles [7, 9, 29], and agarose [13, 30] are widely used.”
Influential3D Bioprinting for Biomedical Applications
Kong, B., & Zhao, Y. (2023) · BME Frontiers · doi:10.34133/bmef.0010 · Cited by 35
“The authors analyzed the function of the model and observed the electro-physiological behavior and ventricular contraction phenomena associated with heart rate disorders [8].”
BackgroundContinuous formation of ultrathin, strong collagen sheets with tunable anisotropy and compaction
Malladi, S., Miranda-Nieves, D., Leng, L., Grainger, S. J., Tarabanis, C., Nesmith, A. P., Kosaraju, R., Haller, C. A., Parker, K. K., Chaikof, E. L., et al. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00321 · Cited by 34
Evolution of bioprinting and current applications
Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., Marcos-Romero, A. C., & Díaz-Parralejo, A. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.742 · Cited by 41
“In 2019, pH-driven gelation control was found to provide 20-μm filament resolution, a porous microstructure that enables rapid cell infiltration and microvascularization, and mechanical strength for vasculature fabrication and perfusion in cardiac tissue regeneration[90].”
Biofabrication of Living Actuators
Raman, R. (2024) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-110122-013805 · Cited by 37
Sergis, V., Kelly, D., Pramanick, A., Britchfield, G., Mason, K., & Daly, A. C. (2025) · Biofabrication · doi:10.1088/1758-5090/adaa22 · Cited by 38
“Previous literature has reported improved print quality outcomes for support hydrogel formulations with smaller particle sizes [16, 17, 23].”
InfluentialBioprinting stem cells: building physiological tissues one cell at a time
Scognamiglio, C., Soloperto, A., Ruocco, G., & Cidonio, G. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00124.2020 · Cited by 35
“Depending on their precursors, hydrogels can form a network undergoing sol-gel transition via physical or chemical cross-linking induced by temperature or pH change (79), light exposure (25), or enzymatic process (115).”
BackgroundColly, A., Marquette, C. A., & Courtial, E. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c00018 · Cited by 35
Growing Hydrogel Organ Mannequins with Interconnected Cavity Structures
Jiang, P., Ji, Z., Liu, D., Ma, S., Wang, X., & Zhou, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202108845 · Cited by 34
Yu, P., Qi, L., Guo, Z., Lin, S., Liu, Y., & Zhao, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110388 · Cited by 34
Cardiovascular 3D bioprinting: A review on cardiac tissue development
Kalhori, D., Zakeri, N., Zafar-Jafarzadeh, M., Moroni, L., & Solati‐Hashjin, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00221 · Cited by 37
Advances of 3D Printing in Vascularized Organ Construction
Li, S., Liu, S., & Wang, X. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.588 · Cited by 35
“described a 3D printing technique to build complex collagen scaffolds to engineer biological heart tissues[83].”
MethodThe evolution of polyurethane heart valve replacements: How chemistry translates to the clinic
Crago, M., Lee, A., Farajikhah, S., Oveissi, F., Fletcher, D. F., Dehghani, F., Winlaw, D. S., & Naficy, S. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104916 · Cited by 36
Self-citationWhole-Heart Tissue Engineering and Cardiac Patches: Challenges and Promises
Akbarzadeh, A., Sobhani, S., Khaboushan, A. S., & Kajbafzadeh, A. M. (2023) · Bioengineering · doi:10.3390/bioengineering10010106 · Cited by 35
“7 mm diameter, 8 mm height) and an acellular neonatalsized heart analog (37 mm diameter, 55 mm height) [61].”
BackgroundAbedi, F., Ghandforoushan, P., Adeli, F., Yousefnezhad, M., Mohammadi, A., Moghaddam, S. V., & Davaran, S. (2023) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.101372 · Cited by 38
Sacrificial biomaterials in 3D fabrication of scaffolds for tissue engineering applications
Wang, C., & Zhou, Y. (2023) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35312 · Cited by 38
Scalable Processes for Culturing Meat Using Edible Scaffolds
Kawecki, N. S., Chen, K. K., Smith, C. S., Xie, Q., Cohen, J. M., & Rowat, A. C. (2024) · Annual Review of Food Science and Technology · doi:10.1146/annurev-food-072023-034451 · Cited by 36
Design of probiotic delivery systems and their therapeutic effects on targeted tissues
Xu, C., Guo, J., Chang, B., Zhang, Y., Tan, Z., Tian, Z., Duan, X., Ma, J., Jiang, Z., & Hou, J. (2024) · Journal of Controlled Release · doi:10.1016/j.jconrel.2024.08.037 · Cited by 36
Wu, H., Lyu, H., Jiang, H., Wang, Y., Yang, R., Tofail, S. A. M., Xu, H., Guo, C., Mei, D., Gazit, E., et al. (2025) · Science Advances · doi:10.1126/sciadv.adu6759 · Cited by 35
“The high flexibility allows the I 3 K/SF fibrous piezogel the ability of processability for device engineering ( 45 ).”
Cardiac xenotransplantation: a promising way to treat advanced heart failure
Shu, S., Ren, J., & Song, J. (2020) · Heart Failure Reviews · doi:10.1007/s10741-020-09989-x · Cited by 33
“(1) Three-dimensional printing technology makes it possible to generate hearts that accurately reproduce individual-specific anatomical structures, but improvements in the functional outcomes are still needed [167].”
BackgroundThermofluidic heat exchangers for actuation of transcription in artificial tissues
Corbett, D. C., Fabyan, W. B., Grigoryan, B., O’Connor, C. E., Johansson, F., Batalov, I., Regier, M. C., DeForest, C. A., Miller, J. S., & Stevens, K. R. (2020) · Science Advances · doi:10.1126/sciadv.abb9062 · Cited by 33
A review of strategies for development of tissue engineered meniscal implants
Klarmann, G. J., Gaston, J. D., & Ho, V. B. (2021) · Biomaterials and Biosystems · doi:10.1016/j.bbiosy.2021.100026 · Cited by 37
Harlaar, N., Dekker, S. O., Zhang, J., Snabel, R. R., Veldkamp, M. W., Verkerk, A. O., Fabres, C. C., Schwach, V., Lerink, L. J. S., Rivaud, M. R., et al. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-021-00827-5 · Cited by 35
Molley, T. G., Hung, T., & Kilian, K. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201122 · Cited by 33
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38
“After 7 days in vivo, incorporation of VEGF (100 ng/mL) into a porous collagen 1 construct led to vessel penetration depths of ~200 μm [71].”
BackgroundMethodInfluentialEthical challenges with 3D bioprinted tissues and organs
Datta, P., Cabrera, L. Y., & Ozbolat, I. T. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.08.012 · Cited by 35
Camman, M., Joanne, P., Brun, J., Marcellan, A., Dumont, J., Agbulut, O., & Hélary, C. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213219 · Cited by 34
Zhu, Y., Stark, C. J., Madira, S., Ethiraj, S., Venkatesh, A., Anilkumar, S., Jung, J., Lee, S. H., Wu, C. A., Walsh, S. K., et al. (2022) · Bioengineering · doi:10.3390/bioengineering9120807 · Cited by 34
“Given that RGD-modified alginates are attractive biomaterials for cell growth and differentiation [16], and that FRESH 3D bioprinting is a popular printing technique to generate scaffolds in complex geometry with high precision [11], we believe this study may have an important impact in the field of 3D bioprinting to…”
BackgroundMethodInfluential3D Printing in pharmaceutical manufacturing: Current status and future prospects
Sultana, N., Ali, A., Waheed, A., & Aqil, M. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107987 · Cited by 42
Biomaterial-based in vitro 3D modeling of glioblastoma multiforme
Ahmed, T. (2023) · Cancer Pathogenesis and Therapy · doi:10.1016/j.cpt.2023.01.002 · Cited by 34
“203 The hydrogel elastic modulus can be customized between 0.9 and 3.6 kPa, which is ideal for brain tissues.”
BackgroundInfluentialBioprinted optoelectronically active cardiac tissues
Ershad, F., Rao, Z., Maharjan, S., Mesquita, F., Ha, J., Gonzalez, L., Haideri, T., da Costa, E. C., Moctezuma-Ramirez, A., Wang, Y., et al. (2025) · Science Advances · doi:10.1126/sciadv.adt7210 · Cited by 33
Chen, P., Xie, F., Tang, F., & McNally, T. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00433 · Cited by 34
Yang, Q., Lei, D., Huang, S., Yang, Y., Jiang, C., Shi, H., Chen, W., Zhao, Q., You, Z., & Ye, X. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120254 · Cited by 32
Fang, Y., Ouyang, L., Zhang, T., Wang, C., Lu, B., & Sun, W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000782 · Cited by 33
Bioprinting Au Natural: The Biologics of Bioinks
Willson, K., Atala, A., & Yoo, J. J. (2021) · Biomolecules · doi:10.3390/biom11111593 · Cited by 34
Design of biodegradable 3D-printed cardiovascular stent
Veerubhotla, K., & Lee, C. H. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00204 · Cited by 32
Progress in Bioengineering Strategies for Heart Regenerative Medicine
Häneke, T., & Sahara, M. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23073482 · Cited by 34
“Bioprinting: Extrusion based multimaterial BP [153], FRESH BP [154,155],”
BackgroundMethodTissue bioprinting for biology and medicine
Akbari, M., & Khademhosseini, A. (2022) · Cell · doi:10.1016/j.cell.2022.06.015 · Cited by 32
Biofabrication of Sodium Alginate Hydrogel Scaffolds for Heart Valve Tissue Engineering
Rioux, Y., Fradette, J., Maciel, Y., Bégin‐Drolet, A., & Ruel, J. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158567 · Cited by 32
“Therefore, it gained interest in recent studies for the fabrication of heart valve scaffolds [41,43,48,49].”
BackgroundChen, X., Jin, D., Li, R., Wang, D., Ren, Z., Liu, B., Chen, C., Li, L., Liu, S., Xu, B., et al. (2022) · Small · doi:10.1002/smll.202202272 · Cited by 32
A dive into the bath: embedded 3D bioprinting of freeform in vitro models
Öztürk-Öncel, M. Ö., Leal-Martínez, B. H., Monteiro, R. F., Gomes, M. E., & Domingues, R. M. A. (2023) · Biomaterials Science · doi:10.1039/d3bm00626c · Cited by 35
Application of 3D Bioprinting in Liver Diseases
Li, W., Liu, Z., Tang, F., Jiang, H., Zhou, Z., Hao, X., & Zhang, J. (2023) · Micromachines · doi:10.3390/mi14081648 · Cited by 37
“FRESH is an embedded printing method that tackles this problem by extruding bioinks into a yield-stress support bath, which holds the bioinks in place until they are cured [44].”
MethodWu, D., Pang, S., Berg, J., Mei, Y., Ali, A. S. M., Röhrs, V., Tolksdorf, B., Hagenbuchner, J., Ausserlechner, M. J., Deubzer, H. E., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314171 · Cited by 37
Bioprinting of Multimaterials with Computer-aided Design/Computer-aided Manufacturing
Lee, J. M., Sing, S. L., & Yeong, W. Y. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.245 · Cited by 32
Xie, Z., Zeng, J., Kang, D., Saito, S., Miyagawa, S., Sawa, Y., & Matsusaki, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301090 · Cited by 31
Biofabrication of engineered blood vessels for biomedical applications
Laowpanitchakorn, P., Zeng, J., Piantino, M., Uchida, K., Katsuyama, M., & Matsusaki, M. (2024) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2024.2330339 · Cited by 31
Tang, M., Qu, Y., He, P., Yao, E. J., Guo, T., Yu, D., Zhang, N., Kiratitanaporn, W., Sun, Y., Liu, L., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101077 · Cited by 34
“Recent advances in 3D bioprinting technology enables encapsulating cells within biomaterials derived from native ECM, providing well-defined architectures and matrix properties to mimic native tissues [16] [ – ] [18].”
BackgroundHe, X.-C., Chen, X., Liu, Y., Zhong, X., Qiang, L., Wang, H., Wang, F.-Z., Wang, J., Li, C., & Zheng, P. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152439 · Cited by 31
Zhang, L., Jiang, Y. Y., Jia, W., Le, W., Liu, J., Zhang, P., Yang, H., Liu, Z., & Liu, Y. (2024) · Cell Proliferation · doi:10.1111/cpr.13762 · Cited by 32
“15,16 These cardiac organoids replicated some native characteristics of the heart, making it closer to the real in vivo environment, holding the potential to ultimately replace mono-layer CMs-based experiments and animal studies.”
Engineering collagen-based biomaterials for cardiovascular medicine
Zuo, X., Xiao, Y., Yang, J., He, Y., He, Y., Liu, K., Chen, X., & Guo, J. (2024) · Collagen and Leather · doi:10.1186/s42825-024-00174-6 · Cited by 33
Extracellular Matrix Structure and Composition in the Early Four-Chambered Embryonic Heart
Jallerat, Q., & Feinberg, A. W. (2020) · Cells · doi:10.3390/cells9020285 · Cited by 31
Self-citationFeng, L., Liang, S., Zhou, Y., Luo, Y., Chen, R., Huang, Y., Chen, Y., Xu, M., & Yao, R. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01825 · Cited by 32
Chen, J., Huang, J., Zhang, H., & Hu, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09475 · Cited by 31
Ahlfeld, T., Lode, A., Richter, R. F., Pradel, W., Franke, A., Rauner, M., Stadlinger, B., Lauer, G., Gelinsky, M., & Korn, P. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031218 · Cited by 33
“Whereas a fibrin gel would not have been plottable, its fibrinogen precursor was already shown to be processable with bioprinting technologies [17,18].”
BackgroundHydrogel-derived luminescent scaffolds for biomedical applications
Yang, Y., Zhang, Y., Xie, S., Tang, Y., Zeng, Z., & Tang, B. Z. (2021) · Materials Chemistry Frontiers · doi:10.1039/d0qm01140a · Cited by 31
Stem cell-based vascularization of microphysiological systems
Browne, S., Gill, E., Schultheiss, P. J., Goswami, I., & Healy, K. E. (2021) · Stem Cell Reports · doi:10.1016/j.stemcr.2021.03.015 · Cited by 34
Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Modern World Applications for Nano-Bio Materials: Tissue Engineering and COVID-19
Melchor-Martínez, E. M., Castillo, N. E. T., Macías-Garbett, R., Lucero-Saucedo, S. L., Parra‐Saldívar, R., & Sosa‐Hernández, J. E. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.597958 · Cited by 34
“Advanced 3D bio-printed models for the heart also exist and range in complexity from capillary to full-organ development (Lee et al., 2019).”
Background
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.