3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 701–800 of 1,006
Engineering strategies to capture the biological and biophysical tumor microenvironment in vitro
Tan, M. L., Lu, L., & Fischbach, C. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113852 · Cited by 32
Chun, Y. H., Park, S., Kim, E. J., Lee, H. J., Kim, H., Koh, W., Fernandes-Cunha, G. M., Myung, D. J., & Na, K. (2021) · Scientific Reports · doi:10.1038/s41598-021-03270-3 · Cited by 33
Zhou, X., Gao, Q., Yu, D., Shao, Y., Wang, Z., Liu, X., Wang, W., Chang, L., Ma, T., Mok, H., et al. (2022) · Smart Materials in Medicine · doi:10.1016/j.smaim.2022.01.003 · Cited by 32
Galliger, Z., Vogt, C. D., Helms, H. R., & Panoskaltsis‐Mortari, A. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200196 · Cited by 32
3D embedded printing of microfluidic devices using a functional silicone composite support bath
Alioglu, M. A., Singh, Y. P., Nagamine, M., Rizvi, S. H. A., Pal, V., Gerhard, E. M., Saini, S., Kim, M.-H., & Ozbolat, I. T. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103566 · Cited by 40
Li, T., Liu, J., Guo, M., Bin, F., Wang, J., Nakayama, A., Zhang, W., Jin, F., Dong, X., Fujita, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.752 · Cited by 31
“In the study of hydrogel scaffold materials, natural polymeric materials (collagen[26,27], sodium alginate [SA][28], chitosan[29], hyaluronic acid[30], bovine serum albumin [BSA], etc.”
BackgroundWu, Q., Xue, R., Zhao, Y., Ramsay, K., Wang, E. Y., Savoji, H., Veres, T., Cartmell, S. H., & Radisic, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.019 · Cited by 40
“Ultimately, the engineered human left ventricle [73,74], and a 3D bioprinted ventricle model [75] may replace trabeculae-like structures in drug development and disease modelling, due to their conceptual ability to predict ventricle dilatation and remodeling, as well as the ability to capture…”
BackgroundWu, Y. B., Yang, X., Gupta, D., Alioglu, M. A., Qin, M., Özbolat, V., Li, Y., & Ozbolat, I. T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313088 · Cited by 38
Salih, T., Caputo, M., & Ghorbel, M. T. (2024) · Biomolecules · doi:10.3390/biom14070861 · Cited by 32
“…smaller-diameter sized gelatin microparticles (~65 µ m to 25 µ m), which allowed for the decrease in the diameters of the printed collagen filaments (200 µ m to 20 µ m) and the presence of a porous microstructure, which led to the promotion of cell infiltration and micro-vascularization [82].”
Background3D bioprinting of high-performance hydrogel with in-situ birth of stem cell spheroids
Zhu, S., Liao, X., Xu, Y., Zhou, N., Pan, Y., Song, J., Zheng, T., Zhang, L., Bai, L., Wang, Y., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.09.033 · Cited by 30
“On one hand, the cell laden microgels were utilized as bioink to enhance the interaction of the cell-cell and cell-matrix, where the microgels, as the sacrificed phase, would be removed after bioprinting [44].”
MethodThe Interface of Gene Editing with Regenerative Medicine
Farag, V., Devey, E. A., & Leong, K. W. (2024) · Engineering · doi:10.1016/j.eng.2024.10.019 · Cited by 31
Strategies for the vascular patterning of engineered tissues for organ repair
Janson, K. D., Parkhideh, S., Swain, J. W. R., Weaver, J. D., Hartgerink, J. D., & Veiseh, O. (2025) · Nature Biomedical Engineering · doi:10.1038/s41551-025-01420-w · Cited by 35
“In contrast, freeform reversible embedding of suspended hydrogels (FRESH) was primarily developed as a tool for fabricating large-scale scaffolds for organ repair that are subsequently seeded with cells 166 .”
A comprehensive review on the printing efficiency, precision, and cell viability in 3D bioprinting
Li, B., Wang, Z., Huang, C., Xu, L., Huang, S., Qu, M., Xu, Z., Zhang, D., Guo, B., Jin, T., et al. (2025) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2025.104448 · Cited by 31
Enseñar y aprender anatomía: Modelos pedagógicos, historia, presente y tendencias
Suárez-Escudero, J. C., Posada-Jurado, M. C., Bedoya-Muñoz, L. J., Urbina-Sánchez, A. J., Morales, J. L. F., & Bohórquez-Gutiérrez, C. A. (2020) · Acta Médica Colombiana · doi:10.36104/amc.2020.1898 · Cited by 30
Biofabrication of tissue engineering vascular systems
Zhang, Q., Bosch-Rué, È., Pérez, R. A., & Truskey, G. A. (2021) · APL Bioengineering · doi:10.1063/5.0039628 · Cited by 30
Doyle, S. E., Duchi, S., Onofrillo, C., Quigley, A. F., Bella, C. D., Pirogova, E., & O’Connell, C. D. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100189 · Cited by 31
Kumar, S. (2021) · Materials Advances · doi:10.1039/d1ma00525a · Cited by 33
Long-Fiber Embedded Hydrogel 3D Printing for Structural Reinforcement
Sun, W., Tashman, J. W., Shiwarski, D. J., Feinberg, A. W., & Webster‐Wood, V. A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00908 · Cited by 30
Self-citationProjection-based 3D bioprinting for hydrogel scaffold manufacturing
Sun, Y., Yu, K., Gao, Q., & He, Y. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00189-0 · Cited by 30
Hua, W., Mitchell, K., Kariyawasam, L. S., Do, C., Chen, J., Raymond, L., Valentin, N., Coulter, R., Yang, Y., & Jin, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12465 · Cited by 30
Qin, Z., Pang, Y., Chun, L., Yang, Y., Gao, M., Zheng, L. X., & Zhao, J. (2022) · Biomaterials Science · doi:10.1039/d2bm00832g · Cited by 30
3D bioprinting of emulating homeostasis regulation for regenerative medicine applications
Wang, Z., Xiang, L., Lin, F. H., Tang, Y., & Cui, W. (2022) · Journal of Controlled Release · doi:10.1016/j.jconrel.2022.11.035 · Cited by 31
Collagen processing with mesoscale aggregates as templates and building blocks
Pei, Y., Yang, W., Tang, K., & Kaplan, D. L. (2023) · Biotechnology Advances · doi:10.1016/j.biotechadv.2023.108099 · Cited by 31
Direct 3D printing of a two-part silicone resin to fabricate highly stretchable structures
Gharaie, S., Zolfagharian, A., Moghadam, A. A. A., Shukur, N., Bodaghi, M., Mosadegh, B., & Kouzani, A. Z. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00421-y · Cited by 33
“The detail of other biological models suitable for 3D printing silicone via FRE can be found elsewhere [43].”
BackgroundMethodInfluentialCollagen materials with oriented structure for biomedical applications
Zeng, R., Tang, K., Tian, H., & Pei, Y. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230664 · Cited by 31
Pereira, R. F., Lourenço, B. N., Bártolo, P., & Granja, P. L. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001176 · Cited by 31
Engineered Maturation Approaches of Human Pluripotent Stem Cell-Derived Ventricular Cardiomyocytes
Ge, F., Wang, Z., & Xi, J. (2019) · Cells · doi:10.3390/cells9010009 · Cited by 29
“used 3D bio-print collagen to obtain a human heart tissue model that possessed synchronized contraction and directional action potential propagation [32].”
MethodEngineering human immune organoids for translational immunology
Suhito, I. R., Sunil, C., & Tay, A. K. P. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.10.010 · Cited by 39
“For example, cardiac organoids were made in a freeform embeddable collagen hydrogel suspension with a 3D bioprinting technique and it precisely reflects the anatomical structures of heart [142].”
MethodBiofabrication and biomanufacturing in Ireland and the UK
Murphy, J. F., Lavelle, M., Asciak, L., Burdis, R., Levis, H. J., Ligorio, C., McGuire, J., Polleres, M., Smith, P. O., Tullie, L., et al. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00316-z · Cited by 30
“More recently, the use of support baths has enabled bioprinting at much finer spatial resolutions with a diverse range of bioinks [57], while novel biofabrication approaches have helped to address important challenges such as dramatically reducing printing time [58], engineering of anisotropic…”
Peregrino, V. M. A., Tenorio-Barajas, A. Y., Mendoza‐Barrera, C., Román-Doval, J., Lavariega-Sumano, E. F., Torres-Arellanes, S. P., & Román‐Doval, R. (2025) · Bioengineering · doi:10.3390/bioengineering12090936 · Cited by 36
“In this regard, Lee and co-workers (2019) [140] developed a collagen-based cardiac tissue model using a suspended hydrogel method to enhance capillary scaling and microvascularization.”
High-throughput fabrication of cell-laden 3D biomaterial gradients
Guimarães, C. F., Gasperini, L., Ribeiro, R. S., Carvalho, A. F., Marques, A. P., & Reis, R. L. (2020) · Materials Horizons · doi:10.1039/d0mh00818d · Cited by 32
Mini-review: advances in 3D bioprinting of vascularized constructs
Bova, L., Billi, F., & Cimetta, E. (2020) · Biology Direct · doi:10.1186/s13062-020-00273-4 · Cited by 31
Yoo, K. M., Murphy, S. V., & Skardal, A. (2021) · Gels · doi:10.3390/gels7010013 · Cited by 29
Cardiac Organoids to Model and Heal Heart Failure and Cardiomyopathies
Seguret, M., Vermersch, E., Jouve, C., & Hulot, J. (2021) · Biomedicines · doi:10.3390/biomedicines9050563 · Cited by 33
Template‐Enabled Biofabrication of Thick 3D Tissues with Patterned Perfusable Macrochannels
Davoodi, E., Montazerian, H., Zhianmanesh, M., Abbasgholizadeh, R., Haghniaz, R., Baidya, A., Pourmohammadali, H., Annabi, N., Weiss, P. S., Toyserkani, E., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202102123 · Cited by 30
Embedded 3D Printing of Ultrasound‐Compatible Arterial Phantoms with Biomimetic Elasticity
Wu, Y., Chee, A. J. Y., Golzar, H., Yu, A. C. H., & Tang, X. S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110153 · Cited by 29
Hydrogel Injection Molding to Generate Complex Cell Encapsulation Geometries
Emerson, A. E., McCall, A. B., Brady, S. R., Slaby, E. M., & Weaver, J. D. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00640 · Cited by 30
Interfacial Regulation for 3D Printing based on Slice‐Based Photopolymerization
Wu, L., & Dong, Z. (2023) · Advanced Materials · doi:10.1002/adma.202300903 · Cited by 31
Bioprinting living organs: The next milestone in organ transplantation?
Wang, P., Hao, R., Gao, C., Wen, C., Pan, H., Liu, W., Ruan, C., & Lu, W. W. (2023) · The Innovation Life · doi:10.59717/j.xinn-life.2023.100019 · Cited by 29
The Prospect of Hepatic Decellularized Extracellular Matrix as a Bioink for Liver 3D Bioprinting
Shi, W. T., Zhang, Z., & Wang, X. (2024) · Biomolecules · doi:10.3390/biom14081019 · Cited by 29
Khati, V., Turkki, J. A., Ramachandraiah, H., Pati, F., Gaudenzi, G., & Russom, A. (2022) · Bioengineering · doi:10.3390/bioengineering9110603 · Cited by 28
Design considerations and biomaterials selection in embedded extrusion 3D bioprinting
Yogeshwaran, S., Hosseinabadi, H. G., Gendy, D. E., & Miri, A. K. (2024) · Biomaterials Science · doi:10.1039/d4bm00550c · Cited by 31
Kim, W.-J., Kim, Y., Lu, Y., Ovissipour, R., & Nitin, N. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110823 · Cited by 28
Hybrid Formative‐Additive Manufacturing
Brown, N. C., & Mueller, J. (2025) · Advanced Materials · doi:10.1002/adma.202417609 · Cited by 31
3D extrusion bioprinting: rational bioink design and advanced fabrication techniques
Jergitsch, M., & Mateos‐Timoneda, M. A. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.06.008 · Cited by 33
Martínez‐Lozada, Z., & Robinson, M. B. (2020) · Neurochemistry International · doi:10.1016/j.neuint.2020.104787 · Cited by 30
“These properties are not observed in peripheral vasculature (Lee et al., 2019).”
BackgroundMultiphoton-Excited Deep-Ultraviolet Photolithography for 3D Nanofabrication
Taguchi, A., Nakayama, A., Oketani, R., Kawata, S., & Fujita, K. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c02519 · Cited by 28
FRESH Bioprinting of Dynamic Hydrazone-Cross-Linked Synthetic Hydrogels
Mueller, E., Xu, F., & Hoare, T. R. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01046 · Cited by 32
Huang, Y., Li, X., Poudel, A. J., Zhang, W., & Xiao, L. J. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101668 · Cited by 28
Immohr, M. B., Adrego, F. D. S., Teichert, H. L., Schmidt, V., Sugimura, Y., Bauer, S. J., Barth, M., Lichtenberg, A., & Akhyari, P. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9f91 · Cited by 28
Wu, C. A., Zhu, Y., Venkatesh, A., Stark, C. J., Lee, S. H., & Woo, Y.-P. J. (2023) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2022.0214 · Cited by 29
“15 Thus, we aimed at finding optimum conditions to further reduce microsphere size and improve uniform morphology.”
InfluentialLiu, Q., Chen, M., Gu, P., Tong, L., Wang, P., Zhu, J., Xu, Y., Lu, G., Luo, E., Liang, J., et al. (2023) · Small · doi:10.1002/smll.202206960 · Cited by 28
Supramolecular assemblies of multifunctional microgels for biomedical applications
Zheng, J., Zhu, C., Xu, X., Wang, X., & Fu, J. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00346a · Cited by 31
Tournier, P., Saint‐Pé, G., Lagneau, N., Loll, F., Halgand, B., Tessier, A., Guicheux, J., Visage, C. L., & Delplace, V. (2023) · Advanced Science · doi:10.1002/advs.202300055 · Cited by 28
Zhang, S., Xu, G., Wu, J., Liu, X., Fan, Y. Z., Chen, J., Wallace, G. G., & Gu, Q. (2023) · Small Methods · doi:10.1002/smtd.202300685 · Cited by 28
Cation-crosslinked κ-carrageenan sub-microgel medium for high-quality embedded bioprinting
Zhang, H., Luo, Y. H., Hu, Z., Chen, M., Chen, S., Yao, Y., Yao, J., Shao, X., Wu, K., Zhu, Y., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1cf3 · Cited by 29
“…rpm. Longer blending times resulted in smaller micro-particle sizes, with a blending time of 60 min yielding sub-microparticles with an average diameter of 642 ± 65 nm (figure 1(a)), which was much smaller than those of microgels reported in previous research (table S1) [7, 14, 25, 27, 29, 31].”
BackgroundResultMultiscale embedded printing of engineered human tissue and organ equivalents
Zhang, C., Hua, W., Mitchell, K., Raymond, L., Delzendehrooy, F., Wen, L., Do, C., Chen, J., Yang, Y., Linke, G., et al. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2313464121 · Cited by 29
Ortega, J. A., de Aguiar, G. P. S., Chandravanshi, P., Levy, N., Engel, E., & Álvarez, Z. (2024) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1962 · Cited by 28
Voxelated bioprinting of modular double-network bio-ink droplets
Zhu, J., He, Y., Wang, Y., & Cai, L. (2024) · Nature Communications · doi:10.1038/s41467-024-49705-z · Cited by 30
“The matrixprevents easy access toexternal triggerssuch asUV or heat, which are often required to solidify the printed structures 34 .”
Piazza, E. D., Pandolfi, E., Cacciotti, I., Fattore, A. D., Tozzi, A. E., Secinaro, A., & Borro, L. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph182010806 · Cited by 28
“They also bioprinted a tricuspid heart-valve and a heart of neonatal size, achieving scalability, high printing reliability and accuracy [47].”
BackgroundKim, J., Lee, H., Lee, G., Ryu, D., & Kim, G. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.02.020 · Cited by 36
Bioengineering vascularization
Landau, S., Okhovatian, S., Zhao, Y., Liu, C., Shakeri, A., Wang, Y., Ramsay, K., Kieda, J., Jiang, R., & Radisic, M. (2024) · Development · doi:10.1242/dev.204455 · Cited by 30
FRESH 3D Bioprinting of Collagen Types I, II, and III
Moss, S., Shiwarski, D. J., & Feinberg, A. W. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01826 · Cited by 28
Self-citationLi, X., Deng, Q.-S., He, S., Liu, P., Gao, Y., Wei, Z., Zhang, C., Wang, F., Zhu, T., Dawes, H., et al. (2024) · Journal of Nanobiotechnology · doi:10.1186/s12951-024-02977-5 · Cited by 27
Fibronectin-based nanomechanical biosensors to map 3D surface strains in live cells and tissue
Shiwarski, D. J., Tashman, J. W., Tsamis, A., Bliley, J. M., Blundon, M. A., Aranda-Michel, E. C., Jallerat, Q., Szymanski, J. M., McCartney, B. M., & Feinberg, A. W. (2020) · Nature Communications · doi:10.1038/s41467-020-19659-z · Cited by 29
Self-citationUnderstanding and treating paediatric hearing impairment
Wrobel, C., Zafeiriou, M.-P., & Moser, T. (2021) · EBioMedicine · doi:10.1016/j.ebiom.2020.103171 · Cited by 29
“Although currently otic organoids do not resemble the unique cochlear structure, 3D bioprinting techniques such as FRESH (freeform reversible embedding of suspended hydrogels), successfully used in the cardiovascular engineering field [74], could contribute to the engineering of complex inner ear structures.”
Background3-Dimensional Bioprinting of Cardiovascular Tissues
Sung, K., Patel, N. R., Ashammakhi, N. A., & Nguyen, K. (2021) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2020.12.006 · Cited by 33
“Extrusion-based Cardiac tissue: left ventricle Use freeform reversible embedding of suspending hydrogels to bioprint a model of the left ventricle Thrombin Collagen type I Gelatin Pluronic F-127 Gum arabic Fibrinogen Human embryonic stem cell– derived cardiomyocytes Cardiac fibroblasts (94)”
MethodCHIR99021 Promotes hiPSC‐Derived Cardiomyocyte Proliferation in Engineered 3D Microtissues
Hesselbarth, R., Esser, T. U., Roshanbinfar, K., Schrüfer, S., Schubert, D. W., & Engel, F. B. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100926 · Cited by 40
Rajasekar, S., Lin, D. S. Y., Zhang, F., Sotra, A., Boshart, A., Clotet‐Freixas, S., Liu, A. W. K., Hirota, J. A., Ogawa, S., Konvalinka, A., et al. (2022) · Lab on a Chip · doi:10.1039/d1lc01141c · Cited by 29
Tissue-engineered heart chambers as a platform technology for drug discovery and disease modeling
Mousavi, A., Stefanek, E., Jafari, A., Ajji, Z., Naghieh, S., Akbari, M., & Savoji, H. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212916 · Cited by 29
Bakırcı, E., Guenat, O. T., Ahmad, S. S., & Gantenbein, B. (2022) · European Cells and Materials · doi:10.22203/ecm.v044a02 · Cited by 28
Enzymatically Triggered Deprotection and Cross-Linking of Thiolated Alginate-Based Bioinks
Naeimipour, S., Boroojeni, F. R., Selegård, R., & Aili, D. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c02037 · Cited by 28
“49 The relatively large gelatin bead size resulted in a rather rough surface of the printed structures and consequently a large surface-to-volume ratio, which can facilitate nutrient and oxygen transport.”
BackgroundOwida, H. A. (2022) · Applied Bionics and Biomechanics · doi:10.1155/2022/2260216 · Cited by 31
“[45] from Carnegie Mellon University successfully bioprinted a heart valve tissue.”
MethodPediatric pulmonary valve replacements: Clinical challenges and emerging technologies
Crago, M., Winlaw, D. S., Farajikhah, S., Dehghani, F., & Naficy, S. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10501 · Cited by 30
Vascularized organ bioprinting: From strategy to paradigm
Wang, H., Liu, X., Gu, Q., & Zheng, X. (2023) · Cell Proliferation · doi:10.1111/cpr.13453 · Cited by 29
Gao, Z., Liu, X., Zhao, H., Xia, S., Liu, W., Bai, H., Lv, F., Zheng, X., Huang, Y., Gu, Q., et al. (2023) · Science China Chemistry · doi:10.1007/s11426-022-1472-6 · Cited by 27
Sreepadmanabh, M., Ganesh, M., Bhat, R., & Bhattacharjee, T. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acd315 · Cited by 28
“These challenges are overcome by directly 3D printing cellular constructs inside the jammed microgel systems [26, 28, 29, 34, 38–40, 44, 51–57, 94–104].”
Biofabrication strategies with single-cell resolution: a review
Zhou, D., Dou, B., Kroh, F., Wang, C., & Ouyang, L. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ace863 · Cited by 31
“For example, Lee et almanaged to print collagen filaments of 20– 200 μm in diameter within the suspension baths by tuning the printing parameters [126].”
MethodUyanga, K. A., Li, W., & Daoud, W. A. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113041 · Cited by 27
Diatomite-incorporated hierarchical scaffolds for osteochondral regeneration
Deng, C., Chen, Q., Li, Z., Lu, L., Tong, Y., Yuan, J., Yin, F., Cheng, Y., & Wu, C. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.05.004 · Cited by 37
Zheng, L., Tseomashko, N. E., Voronova, А. A., Vasil’kov, A. Y., Hu, X., & Wang, X. (2024) · Collagen and Leather · doi:10.1186/s42825-024-00164-8 · Cited by 30
“Lee et al. offered a method for 3D bioprinting collagen utilizing FRESH, which allows the design of human heart components at various scales [137]. pH modification was utilized to control collagen gelation, and the printing resolution reached 10 μm.”
BackgroundMethodHybrid 3D Bioprinting of Sustainable Biomaterials for Advanced Multiscale Tissue Engineering
Ma, X., Xu, M., Cui, X., Yin, J., & Wu, Q. (2025) · Small · doi:10.1002/smll.202408947 · Cited by 35
Chalard, A. E., Mauduit, M., Assié-Souleille, S., Joseph, P., Malaquin, L., & Fitremann, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101162 · Cited by 39
Artificial Biosystems by Printing Biology
Arrabito, G. D., Ferrara, V., Bonasera, A., & Pignataro, B. (2020) · Small · doi:10.1002/smll.201907691 · Cited by 30
Freeform Polymer Precipitation in Microparticulate Gels
Karyappa, R. B., & Hashimoto, M. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01208 · Cited by 28
Tackling Current Biomedical Challenges With Frontier Biofabrication and Organ-On-A-Chip Technologies
Celikkin, N., Presutti, D., Maiullari, F., Fornetti, E., Agarwal, T., Paradiso, A., Volpi, M., Święszkowski, W., Bearzi, C., Barbetta, A., et al. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.732130 · Cited by 26
“…al. (2019) Liver Drug screening Fabrication of a tool that integrates liver cells, liver decellularized ECM, and vascular/ biliary fluidic channels Lee et al. (2019b) Liver sinusoid-on-a-chip model and uniform distribution of discrete HUVECs Mi et al. (2018b) In vitro development of non-alcoholic…”
BackgroundMethodGoonoo, N. (2022) · Biomaterials Science · doi:10.1039/d1bm01641e · Cited by 27
3D Bioprinting: An Enabling Technology to Understand Melanoma
Fernandes, S., Vyas, C., Lim, P., Pereira, R. F., Virós, A., & Bártolo, P. (2022) · Cancers · doi:10.3390/cancers14143535 · Cited by 27
Cryoprinting of nanoparticle-enhanced injectable hydrogel with shape-memory properties
Wang, Y., Zhou, X., Zhu, S., Wei, X., Zhou, N., Liao, X., Peng, Y., Tang, Y., Zhang, L., Yang, X., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111120 · Cited by 26
Montalbano, G., Calore, A. R., & Vitale‐Brovarone, C. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53593 · Cited by 27
Chen, Z., Huang, C., Liu, H., Han, X., Wang, Z., Li, S., Huang, J. S., & Wang, Z. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00251-5 · Cited by 27
“[26] successfully printed a mini heart using the FRESH printing method, with heart tissue using collagen as the external scaffolding material and human stem cell-derived cardiomyocytes as the internal filling.”
MethodOrgan bioprinting: progress, challenges and outlook
Wu, Y. B., Qin, M., & Yang, X. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb01630g · Cited by 26
Han, K., Cheng, Y., Han, Q., & Chen, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137253 · Cited by 26
“Numerous techniques have been employed to enhance the printability of collagen, including thermal-[27] and pH-driven [28] self-assembly and riboflavin-[29], tannin-[30], and genipin-driven [31] chemical crosslinking.”
3D aggregation of cells in packed microgel media
Morley, C. D., Tordoff, J., O’Bryan, C. S., Weiss, R., & Angelini, T. E. (2020) · Soft Matter · doi:10.1039/d0sm00517g · Cited by 26
“Please do not adjust margins 45 Lee, A., et al. "3D bioprinting of collagen to rebuild components of the human heart." Science 365.6452 (2019): 482-487. 46 Moxon, Samuel R., et al. "Suspended manufacture of biological structures." Advanced Materials 29.13 (2017): 1605594. 47 Highley, Christopher B., et al. "Jammed mic…”
BackgroundInfluentialHigh mechanical performance and multifunctional degraded fucoidan-derived bioink for 3D bioprinting
Zhu, S., Zhou, Z. Y., Chen, X., Zhu, W., Yang, M., Yu, M., Sun, J., Zuo, Y., He, J., Pan, H., et al. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122805 · Cited by 25
An innovative 4D printing approach for fabrication of anisotropic collagen scaffolds
Patrawalla, N. Y., Liebendorfer, K., & Kishore, V. (2024) · Biofabrication · doi:10.1088/1758-5090/ad7f8f · Cited by 25
Extracellular matrix-based biomaterials in burn wound repair: A promising therapeutic strategy
Song, Y., Liu, P., Zhou, X., Chen, Y., Wu, W., Zhang, J.-Y., Li‐Ling, J., & Xie, H. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137633 · Cited by 29
Unconventional bioprinting modalities for advanced tissue biofabrication
Derman, İ. D., Kim, M. H., Sarikaya, M. D., Yilmaz, Y. O., Aliftiras, E. G., Stepanyants, V., Rivera, T., & Ozbolat, I. T. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123704 · Cited by 28
A Comprehensive Assessment on the Pivotal Role of Hydrogels in Scaffold-Based Bioprinting
Ratnamani, M. P. C., Zhang, X., & Wang, H. (2022) · Gels · doi:10.3390/gels8040239 · Cited by 29
“, cardiac tissue patches [4], osteochondyle [5], solid tumors [6], etc.”
BackgroundMethodInfluentialZohar, B., Debbi, L., Machour, M., Nachum, N., Redenski, I., Epshtein, M., Korin, N., & Levenberg, S. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.05.026 · Cited by 25
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.