3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 101–200 of 1,006
Fabricating hydrogels to mimic biological tissues of complex shapes and high fatigue resistance
Yang, H., Ji, M., Yang, M., Shi, M., Pan, Y., Zhou, Y., Qi, H. J., Suo, Z., & Tang, J. (2021) · Matter · doi:10.1016/j.matt.2021.03.011 · Cited by 159
Tong, Z., Jin, L., Oliveira, J. M., Reis, R. L., Zhong, Q., Mao, Z., & Gao, C. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.029 · Cited by 173
The Regulatory Challenge of 3D Bioprinting
Mladenovska, T., Choong, P., Wallace, G. G., & O’Connell, C. D. (2023) · Regenerative Medicine · doi:10.2217/rme-2022-0194 · Cited by 175
Skylar-Scott, M. A., Huang, J. Y., Lu, A., Ng, A. H. M., Duenki, T., Liu, S., Nam, L. L., Damaraju, S., Church, G. M., & Lewis, J. A. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-022-00856-8 · Cited by 160
3D Bioprinting of Macroporous Materials Based on Entangled Hydrogel Microstrands
Kessel, B., Lee, M., Bonato, A., Tinguely, Y., Tosoratti, E., & Zenobi‐Wong, M. (2020) · Advanced Science · doi:10.1002/advs.202001419 · Cited by 160
Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Liu, N., Ye, X., Yao, B., Zhao, M., Wu, P., Liu, G., Zhuang, D., Jiang, H., Chen, X., He, Y., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.021 · Cited by 147
Tran, H. A., Hoang, T. T., Maraldo, A., Do, T. N., Kaplan, D. L., Lim, K. S., & Rnjak‐Kovacina, J. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.027 · Cited by 164
Bioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions
Wei, J., Pan, F., Ping, H., Yang, K., Wang, Y., Wang, Q., & Fu, Z. (2023) · Research · doi:10.34133/research.0164 · Cited by 170
Biodegradable thermoresponsive polymers: Applications in drug delivery and tissue engineering
Hogan, K. J., & Mikos, A. G. (2020) · Polymer · doi:10.1016/j.polymer.2020.123063 · Cited by 163
Recyclable thermosetting polymers for digital light processing 3D printing
Chen, Z., Yang, M., Ji, M., Kuang, X., Qi, H. J., & Wang, T. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109189 · Cited by 165
“This is an open access article under engineering [1,2], soft robotics [3,4], electronics [5,6], metamaterials [7,8], composites [9,10], ceramics [11,12], andglasses [13,14].”
BackgroundMechanical Regulation of Polymer Gels
Xu, C., Chen, Y., Zhao, S., Li, D., Tang, X., Zhang, H., Huang, J., Guo, Z., & Liu, W. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00498 · Cited by 164
Biofabrication methods for reconstructing extracellular matrix mimetics
Aazmi, A., Zhang, D., Mazzaglia, C., Yu, M., Wang, Z., Yang, H., Huang, Y. Y. S., & Ma, L. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.08.018 · Cited by 130
“[206] with permission of American Association for the Advancement of Science, ©2019; (e) Reproduced”
BackgroundMethodTheus, A. S., Ning, L., Hwang, B., Gil, C., Chen, S., Wombwell, A., Mehta, R., & Serpooshan, V. (2020) · Polymers · doi:10.3390/polym12102262 · Cited by 147
Kim, H., Kang, B., Cui, X., Lee, S., Lee, K., Cho, D., Hwang, W., Woodfield, T. B. F., Lim, K. S., & Jang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011252 · Cited by 140
Fang, Y., Guo, Y., Wu, B., Liu, Z., Ye, M., Xu, Y., Ji, M., Chen, L., Lu, B., Nie, K., et al. (2023) · Advanced Materials · doi:10.1002/adma.202205082 · Cited by 155
Kinstlinger, I. S., Saxton, S. H., Calderon, G. A., Ruiz, K. V., Yalacki, D. R., Deme, P. R., Rosenkrantz, J. E., Louis-Rosenberg, J. D., Johansson, F., Janson, K. D., et al. (2020) · Nature Biomedical Engineering · doi:10.1038/s41551-020-0566-1 · Cited by 159
Next generation of heart regenerative therapies: progress and promise of cardiac tissue engineering
Tenreiro, M. F., Louro, A. F., Alves, P. M., & Serra, M. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00140-4 · Cited by 171
Direct coherent multi-ink printing of fabric supercapacitors
Zhao, J., Lu, H., Zhang, Y., Yu, S. Y., Malyi, O. I., Zhao, X., Wang, L., Wang, H., Peng, J., Li, X., et al. (2021) · Science Advances · doi:10.1126/sciadv.abd6978 · Cited by 161
Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering
Samandari, M., Quint, J. P., Rodríguez‐delaRosa, A., Sinha, I., Pourquié, O., & Tamayol, A. (2022) · Advanced Materials · doi:10.1002/adma.202105883 · Cited by 156
Generalizing hydrogel microparticles into a new class of bioinks for extrusion bioprinting
Xin, S., Deo, K. A., Dai, J. H., Pandian, N. K. R., Chimene, D., Möbius, R., Jain, A., Han, A., Gaharwar, A. K., & Alge, D. L. (2021) · Science Advances · doi:10.1126/sciadv.abk3087 · Cited by 152
“Various strategies have been developed to modify existing 3D printing techniques and expand the bioink toolkit, including locking the printed shape in an uncross-linked state using suspension baths (5, 6), rapid improvement of the mechanical strength of bioinks after extrusion via double network formation (7), photopo…”
MethodHuman organoids-on-chips for biomedical research and applications
Wang, H., Ning, X., Zhao, F. H., Zhao, H., & Li, D. (2024) · Theranostics · doi:10.7150/thno.90492 · Cited by 157
Highlights on Advancing Frontiers in Tissue Engineering
Ashammakhi, N. A., GhavamiNejad, A., Tutar, R., Fricker, A. T. R., Roy, I., Chatzistavrou, X., Apu, E. H., Nguyen, K., Ahsan, T., Pountos, I., et al. (2022) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0012 · Cited by 159
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 154
Recent advances in 3D bioprinting of vascularized tissues
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zhao, H., Cai, Z., & Zhao, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109398 · Cited by 155
Responsive biomaterials for 3D bioprinting: A review
Fu, Z., Ouyang, L., Xu, R., Yang, Y., & Sun, W. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.001 · Cited by 147
Three-dimensional bio-printing of primary human hepatocellular carcinoma for personalized medicine
Xie, F., Sun, L., Pang, Y., Xu, G., Jin, B., Xu, H., Lu, X., Xu, Y., Du, S., Wang, Y., et al. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2020.120416 · Cited by 147
Binder-free 3D printing of covalent organic framework (COF) monoliths for CO2 adsorption
Liu, X., Lim, G. J. H., Wang, Y., Zhang, L., Mullangi, D., Wu, Y., Zhao, D., Ding, J., Cheetham, A. K., & Wang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126333 · Cited by 149
Recent advances in 3D printing with protein-based inks
Mu, X., Agostinacchio, F., Xiang, N., Pei, Y., Khan, Y., Guo, C., Cebe, P., Motta, A., & Kaplan, D. L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101375 · Cited by 138
Passive myocardial mechanical properties: meaning, measurement, models
Emig, R., Zgierski-Johnston, C. M., Timmermann, V., Taberner, A. J., Nash, M. P., Köhl, P., & Peyronnet, R. (2021) · Biophysical Reviews · doi:10.1007/s12551-021-00838-1 · Cited by 152
“2018), 3D bioprinting (Lee et al. 2019), micro-moulding or photo-patterning, as reviewed recently elsewhere (Elkhoury et al.”
BackgroundMethodGranular Hydrogels in Biofabrication: Recent Advances and Future Perspectives
Daly, A. C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301388 · Cited by 156
Design aspects and characterization of hydrogel-based bioinks for extrusion-based bioprinting
Karvinen, J., & Kellomäki, M. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00274 · Cited by 155
Bliley, J. M., Vermeer, M. C. S. C., Duffy, R. M., Batalov, I., Kramer, D., Tashman, J. W., Shiwarski, D. J., Lee, A., Teplenin, A. S., Volkers, L., et al. (2021) · Science Translational Medicine · doi:10.1126/scitranslmed.abd1817 · Cited by 134
Self-citationOn the progress of 3D-printed hydrogels for tissue engineering
Advíncula, R. C., Dizon, J. R. C., Caldona, E. B., Viers, R. A., Siacor, F. D. C., Maalihan, R. D., & Espera, A. H. (2021) · MRS Communications · doi:10.1557/s43579-021-00069-1 · Cited by 147
“Left: fresh print, Right: cross-sectional view.[90] (b) 3D printing an artificial meniscus.”
BackgroundPolymeric Materials, Advances and Applications in Tissue Engineering: A Review
Socci, M. C., Rodríguez, G., Oliva, E., Fushimi, S., Takabatake, K., Nagatsuka, H., Felice, C. J., & Rodríguez, A. P. (2023) · Bioengineering · doi:10.3390/bioengineering10020218 · Cited by 158
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Low-temperature 3D printing of collagen and chitosan composite for tissue engineering
Suo, H., Zhang, J., Xu, M., & Wang, L. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.111963 · Cited by 137
3D bioprinting of prevascularised implants for the repair of critically-sized bone defects
Nulty, J., Freeman, F. E., Browe, D. C., Burdis, R., Ahern, D. P., Pitacco, P., Lee, Y. B., Alsberg, E., & Kelly, D. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.003 · Cited by 134
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.012 · Cited by 201
“The synchronous beating was observed after seven days of culture and the printed constructs were expanded inward and out-ward, similar to the native heart in systole and diastole [70].”
BackgroundMethodInfluentialShiwarski, D. J., Hudson, A. R., Tashman, J. W., Bakırcı, E., Moss, S., Coffin, B. D., & Feinberg, A. W. (2025) · Science Advances · doi:10.1126/sciadv.adu5905 · Cited by 147
Self-citationBiomaterial–Related Cell Microenvironment in Tissue Engineering and Regenerative Medicine
Gao, J., Yu, X., Wang, X., He, Y., & Ding, J. (2022) · Engineering · doi:10.1016/j.eng.2021.11.025 · Cited by 141
Intelligent Vascularized 3D/4D/5D/6D-Printed Tissue Scaffolds
Han, X., Saiding, Q., Cai, X., Xiao, Y., Wang, P., Cai, Z., Gong, X., Gong, W., Zhang, X., & Cui, W. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01187-2 · Cited by 154
“Recently, 3D bioprinting has emerged as a promising alternative method and is now widely used to manufacture functional tissue structures with complex geometries [3–5].”
BackgroundMethod4D bioprinting of programmed dynamic tissues
Lai, J., Liu, Y., Lü, G., Yung, P. S., Wang, X., Tuan, R. S., & Li, Z. A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.03.033 · Cited by 170
Extracellular matrix dynamics: tracking in biological systems and their implications
Hu, M. M., Ling, Z., & Ren, X. (2022) · Journal of Biological Engineering · doi:10.1186/s13036-022-00292-x · Cited by 148
Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Fonseca, A. C., Melchels, F. P. W., Ferreira, M. J. S., Moxon, S. R., Potjewyd, G., Dargaville, T. R., Kimber, S. J., & Domingos, M. A. N. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00342 · Cited by 143
Mahmood, A., Akram, T., Chen, H., & Chen, S. (2022) · Polymers · doi:10.3390/polym14214698 · Cited by 143
“The journal Science published a number of interesting papers on additive manufac‐ turing in the year 2019, including three investigations on the ultrafast 3D printing of mul‐ tiscale structures [41–43] and two studies on the 3D bioprinting of tissues or organs [44,45].”
BackgroundClick Chemistry for Biofunctional Polymers: From Observing to Steering Cell Behavior
Ghosal, K., Bhattacharyya, S. K., Mishra, V., & Zuilhof, H. T. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00251 · Cited by 143
Biomaterials for Bioprinting Microvasculature
Barrs, R. W., Jia, J., Silver, S. E., Yost, M. J., & Mei, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00027 · Cited by 140
Gao, G., Park, W., Kim, B. S., Ahn, M., Chae, S., Cho, W., Kim, J., Lee, J. Y., Jang, J., & Cho, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202008878 · Cited by 138
Ng, W. L., An, J., & Chua, C. K. (2024) · Engineering · doi:10.1016/j.eng.2024.01.028 · Cited by 141
Assembling Living Building Blocks to Engineer Complex Tissues
Ouyang, L., Armstrong, J. P. K., Salmeron‐Sanchez, M., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909009 · Cited by 124
Fernandez-Checa, J. C., Bagnaninchi, P., Ye, H., Sancho-Bru, P., Falcon-Perez, J. M., Royo, F., Garcia-Ruiz, C., Konu, O., Miranda, J., Lunov, O., et al. (2021) · Journal of Hepatology · doi:10.1016/j.jhep.2021.06.021 · Cited by 126
“167 Many novel integrative bioengineering approaches have been adopted, with new designs and innovations continuing to evolve at a rapid pace.”
BackgroundDevelopments and Opportunities for 3D Bioprinted Organoids
Ren, Y., Yang, X., Ma, Z., Sun, X., Zhang, Y., Li, W., Yang, H., Qiang, L., Yang, Z., Liu, Y., et al. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v7i3.364 · Cited by 126
“As a breakthrough in addressing the traditional 3D culture-scale limitations, bioprinting has been reported for producing centimeterlevel intestinal organoids[20,34].”
BackgroundMethodInfluentialRecreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131
Levi, S., Yen, F.-C., Baruch, L., & Machluf, M. (2022) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2022.05.011 · Cited by 136
Tan, B., Gan, S., Wang, X., Liu, W., & Li, X. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00172h · Cited by 135
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 135
Solid Organ Bioprinting: Strategies to Achieve Organ Function
Jorgensen, A. M., Yoo, J. J., & Atala, A. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00145 · Cited by 118
Biocompatibility of Biomaterials for Tissue Regeneration or Replacement
Raut, H. K., Das, R., Liu, Z., Liu, X., & Ramakrishna, S. (2020) · Biotechnology Journal · doi:10.1002/biot.202000160 · Cited by 130
Zhang, Y., Xu, M., Ren, Y., Ba, Y., Liu, S., Zuo, A., Xu, H., Weng, S., Han, X., & Liu, Z. (2024) · Molecular Cancer · doi:10.1186/s12943-024-01980-6 · Cited by 131
“3D bioprinting and organ microarrays can generate or mimic the vasculature system to supply nutrients to organoids, allowing for greater growth and development [172, 173].”
BackgroundAhlfeld, T., Gudurić, V., Duin, S., Akkineni, A. R., Schütz, K., Kilian, D., Emmermacher, J., Mateo, N. C., Dani, S., von Witzleben, M., et al. (2020) · Biomaterials Science · doi:10.1039/d0bm00027b · Cited by 129
A photocurable hybrid chitosan/acrylamide bioink for DLP based 3D bioprinting
He, Y., Wang, F., Wang, X., Zhang, J., Wang, D., & Huang, X. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109588 · Cited by 126
Fang, Y., Guo, Y., Ji, M., Li, B., Guo, Y., Zhu, J., Zhang, T., & Xiong, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109810 · Cited by 127
Bridging the gap between the science of cultured meat and public perceptions
Tomiyama, A. J., Kawecki, N. S., Rosenfeld, D. L., Jay, J. A., Rajagopal, D., & Rowat, A. C. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.07.019 · Cited by 134
“produce functional organs ex vivo (Lee et al., 2019); it remains to be determined what level of muscle functionality may be optimal for cultured meat taste and texture.”
BackgroundOn‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing
Haake, A., Tutika, R., Schloer, G. M., Bartlett, M. D., & Markvicka, E. J. (2022) · Advanced Materials · doi:10.1002/adma.202200182 · Cited by 123
Rapid Volumetric Bioprinting of Decellularized Extracellular Matrix Bioinks
Lian, L., Xie, M., Luo, Z., Zhang, Z., Maharjan, S., Mu, X., Garciamendez‐Mijares, C. E., Kuang, X., Sahoo, J. K., Tang, G., et al. (2024) · Advanced Materials · doi:10.1002/adma.202304846 · Cited by 140
Reinforced Gels and Elastomers for Biomedical and Soft Robotics Applications
Zhalmuratova, D., & Chung, H. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01078 · Cited by 128
Hierarchical Machine Learning for High-Fidelity 3D Printed Biopolymers
Bone, J. M., Childs, C. M., Menon, A., Póczos, B., Feinberg, A. W., LeDuc, P. R., & Washburn, N. R. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00755 · Cited by 117
Self-citationAl-Kharusi, G., Dunne, N., Little, S., & Levingstone, T. J. (2022) · Bioengineering · doi:10.3390/bioengineering9100561 · Cited by 126
3D Tissue and Organ Printing—Hope and Reality
Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202003751 · Cited by 110
Roadmap for Additive Manufacturing: Toward Intellectualization and Industrialization
Tian, X., Wu, L., Gu, D., Yuan, S., Zhao, Y., Li, X., Ouyang, L., Song, B., Gao, T., He, J., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100014 · Cited by 119
Functional hydrogels for the treatment of myocardial infarction
Wu, T., & Liu, W. (2022) · NPG Asia Materials · doi:10.1038/s41427-021-00330-y · Cited by 122
“Similarly, Lee et al.(45) proposed a method for 3D bioprinting collagen using freeform reversible embossing of suspended hydrogels (FRESH) to design human heart components at different scales, from capillaries to entire organs.”
MethodProtein-Based Hydrogels: Promising Materials for Tissue Engineering
Davari, N., Bakhtiary, N., Khajehmohammadi, M., Sarkari, S., Tolabi, H., Ghorbani, F., & Ghalandari, B. (2022) · Polymers · doi:10.3390/polym14050986 · Cited by 114
“Collagen Physical cross-linking Adjustment of pH (50 mM HEPES), employment of CaCl2 and thrombin, and UV exposure Showed rapid mouse myoblast cells’ infiltration and micro-vascularization Heart [98]”
MethodThe emerging technology of biohybrid micro-robots: a review
Lin, Z., Jiang, T., & Shang, J. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00135-6 · Cited by 123
Tissue-like cultured fish fillets through a synthetic food pipeline
Xu, E., Niu, R., Lao, J., Zhang, S., Li, J., Zhu, Y., Shi, H., Zhu, Q., Chen, Y., Jiang, Y., et al. (2023) · npj Science of Food · doi:10.1038/s41538-023-00194-2 · Cited by 118
“However, for high-precision scaffold construction, it was very dif fi cult to adjust the irregular trajectory and needle diameter for 3D bioprinting of myo fi brils 34 .”
Chen, M., Feng, Z., Guo, W., Yang, D., Gao, S., Li, Y., Shen, S. H., Yuan, Z., Huang, B., Zhang, Y., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13611 · Cited by 120
Advanced application of collagen-based biomaterials in tissue repair and restoration
Zhu, J., Li, Z., Zou, Y., Lu, G., Ronca, A., D’Amora, U., Liang, J., Fan, Y., Zhang, X., & Sun, Y. (2022) · Journal of Leather Science and Engineering · doi:10.1186/s42825-022-00102-6 · Cited by 123
“Compared with traditional techniques, 3D printing offers the possibility of creating replicable, customizable and functional structures with precisely controlled composition and microstructure that can effectively promote the regeneration of different tissues [99].”
BackgroundBasara, G., Ozcebe, S. G., Ellis, B. W., & Zorlutuna, P. (2021) · Gels · doi:10.3390/gels7020070 · Cited by 109
“Natural hydrogels like collagen [13,14], gelatin [15,12,16], alginate [17,18], and hyaluronic acid (HA) [19,20] have been widely used as bioinks for extrusion based bioprinting.”
BackgroundMethod3D bioprinting of a biomimetic meniscal scaffold for application in tissue engineering
Zhou, J., Tian, Z., Tian, Q., Liqing, P., Li, K., Luo, X., Diaodiao, W., Yang, Z., Jiang, S., Sui, X., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.027 · Cited by 122
An Overview of Extracellular Matrix-Based Bioinks for 3D Bioprinting
Wang, H., Yu, H., Zhou, X., Zhang, J., Zhou, H., Hao, H., Ding, L., Li, H., Gu, Y., Ma, J., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.905438 · Cited by 133
Li, T., Hou, J., Wang, L., Zeng, G., Wang, Z., Yu, L., Yang, Q., Yin, J., Long, M., Chen, L., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.037 · Cited by 117
Díaz‐Payno, P. J., Kalogeropoulou, M., Muntz, I., Kingma, E., Kops, N., D’Este, M., Koenderink, G. H., Fratila-Apachitei, L. E., van Osch, G. J. V. M., & ZADPOOR, A. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201891 · Cited by 118
Emerging 3D bioprinting applications in plastic surgery
Pu, Y., Ju, Y., Hu, Y., Xie, X., Fang, B., & Lei, L. (2023) · Biomaterials Research · doi:10.1186/s40824-022-00338-7 · Cited by 120
Microfluidic Tissue Engineering and Bio‐Actuation
Filippi, M., Buchner, T., Yaşa, Ö., Weirich, S., & Katzschmann, R. K. (2022) · Advanced Materials · doi:10.1002/adma.202108427 · Cited by 133
Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Brunel, L. G., Hull, S. M., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6bbe · Cited by 119
“For constructs printed within gelatin microgel support baths, the melting time allowed for the gelatin has been between 1 h and 24 h [62].”
InfluentialReprintable Polymers for Digital Light Processing 3D Printing
Zhu, G., Hou, Y., Xu, J. Z., & Zhao, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007173 · Cited by 119
Collagen and Its Derivatives Serving Biomedical Purposes: A Review
Wosicka-Frąckowiak, H., Poniedziałek, K., Woźny, S., Kuprianowicz, M., Nyga, M., Jadach, B., & Milanowski, B. (2024) · Polymers · doi:10.3390/polym16182668 · Cited by 119
“The pH adjustment and the addition of agents like NaOH can optimize cell viability and mechanical properties [182,183].”
BackgroundEmbedding Biomimetic Vascular Networks via Coaxial Sacrificial Writing into Functional Tissue
Stankey, P. P., Kroll, K. T., Ainscough, A. J., Reynolds, D. S., Elamine, A., Fichtenkort, B. T., Uzel, S. G. M., & Lewis, J. A. (2024) · Advanced Materials · doi:10.1002/adma.202401528 · Cited by 115
3D bioprinting of dynamic hydrogel bioinks enabled by small molecule modulators
Hull, S. M., Lou, J., Lindsay, C. D., Navarro, R. S., Cai, B., Brunel, L. G., Westerfield, A. D., Xia, Y., & Heilshorn, S. C. (2023) · Science Advances · doi:10.1126/sciadv.ade7880 · Cited by 113
“While advances in printing capabilities have enabled the construction of more geometrically complex architectures, the field remains limited by a lack of bioink materials with the mechanical properties suitable for both printing and subsequent cell culture (5, 6).”
BackgroundRapid model-guided design of organ-scale synthetic vasculature for biomanufacturing
Sexton, Z. A., Rütsche, D., Herrmann, J. E., Hudson, A. R., Sinha, S., Du, J., Shiwarski, D. J., Masaltseva, A., Solberg, F. S., Pham, J., et al. (2025) · Science · doi:10.1126/science.adj6152 · Cited by 118
Self-citationFast Stereolithography Printing of Large‐Scale Biocompatible Hydrogel Models
Anandakrishnan, N., Ye, H., Guo, Z., Chen, Z., Mentkowski, K. I., Lang, J. K., Rajabian, N., Andreadis, S. T., Ma, Z., Spernyak, J. A., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202002103 · Cited by 115
Biomaterial-based 3D bioprinting strategy for orthopedic tissue engineering
Chae, S., & Cho, D. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.004 · Cited by 115
Advanced 3D imaging and organoid bioprinting for biomedical research and therapeutic applications
Maharjan, S., Ma, C., Singh, B., Kang, H., Orive, G., Yao, J., & Zhang, Y. S. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115237 · Cited by 114
Lee, S. J., Jeong, W., & Atala, A. (2024) · Advanced Materials · doi:10.1002/adma.202408032 · Cited by 116
Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., Liu, Z., Xiang, L., & He, Y. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00062-y · Cited by 111
Luo, Y., Zhang, T., & Lin, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132926 · Cited by 113
Strategies for improving the 3D printability of decellularized extracellular matrix bioink
Zhang, H., Wang, Y., Zheng, Z., Wei, X., Chen, L., Wu, Y., Huang, W., & Yang, L. (2023) · Theranostics · doi:10.7150/thno.81785 · Cited by 114
“materials; moreover, it enables the printing of complex structures without the need for additional support structures [87].”
BackgroundOrganoid bioprinting: from cells to functional tissues
Huang, M. S., Christakopoulos, F., Roth, J. G., & Heilshorn, S. C. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00268-0 · Cited by 114
“…step with support bath removal, when both the ink and support bath materials exhibit a thermoresponsive phase transition, such as collagen inks in a gelatin microparticle support bath, in which heating to 37 °C simultaneously induces gelation of the collagen and melting of the gelatin 108,109 .”
Castilho, M. D., de Ruijter, M., Beirne, S., Villette, C. C., Ito, K., Wallace, G. G., & Malda, J. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2020.04.014 · Cited by 110
Layer-by-layer assembly methods and their biomedical applications
Zhang, Z., Zeng, J., Gröll, J., & Matsusaki, M. (2022) · Biomaterials Science · doi:10.1039/d2bm00497f · Cited by 111
Zheng, J., Chen, G., Yang, H., Zhu, C., Li, S., Wang, W., Ren, J., Cong, Y., Xu, X., Wang, X., et al. (2023) · Materials Horizons · doi:10.1039/d3mh00718a · Cited by 108
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.