3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Items 301–400 of 1,006
Mazzola, M., & Pasquale, E. D. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00455 · Cited by 78
“Using this approach, the authors were able to engineer different components of the human heart, ranging from small capillaries, to the valves, and the whole organ (Lee et al., 2019).”
BackgroundDevelopment of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials
Liu, G., He, Y., Liu, P., Chen, Z., Chen, X., Wan, L., Li, Y., & Lü, J. (2020) · Engineering · doi:10.1016/j.eng.2020.04.015 · Cited by 78
“[12] presented a method of printing human heart components at various scales, based on suspended hydrogels.”
MethodHwang, D. G., Choi, Y., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.685507 · Cited by 80
Organ-on-a-chip: A new tool for in vitro research
Yan, J., Li, Z., Guo, J., Liu, S., & Guo, J. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114626 · Cited by 76
Tonda‐Turo, C., Carmagnola, I., Chiappone, A., Feng, Z., Ciardelli, G., Hakkarainen, M., & Sangermano, M. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00082 · Cited by 77
Granular hydrogels for 3D bioprinting applications
Cheng, W., Zhang, J., Liu, J., & Yu, Z. (2020) · View · doi:10.1002/viw.20200060 · Cited by 75
Printing 3D vagina tissue analogues with vagina decellularized extracellular matrix bioink
Hou, C., Zheng, J., Li, Z., Qi, X., Tian, Y., Zhang, M., Zhang, J., & Huang, X. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.03.070 · Cited by 76
Reconstructing the heart using iPSCs: Engineering strategies and applications
Cho, S., Lee, C., Skylar‐Scott, M. A., Heilshorn, S. C., & Wu, J. C. (2021) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2021.04.006 · Cited by 79
“Recently, a versatile technology that enables direct embedding of hydrogel inks within a sacrificial, thermoresponsive support hydrogel was developed to bioprint all of the abovementioned components of the human heart, from intricate capillaries to the full intact organ [128].”
Background3D bioprinting: Materials, processes, and applications
Bártolo, P., Malshe, A. P., Ferraris, E., & Koç, B. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.06.001 · Cited by 77
Development of a high-performance open-source 3D bioprinter
Tashman, J. W., Shiwarski, D. J., & Feinberg, A. W. (2022) · Scientific Reports · doi:10.1038/s41598-022-26809-4 · Cited by 74
“The ear scaffold showed that the bioprinter can produce more complex 3D shapes and the quantitative gauging analysis confirmed that the fidelity achieved using collagen bioink was similar to our published results using other FRESH 3D bioprinters (10, 11, 29).”
BackgroundMethodResultSelf-citationVolumetric additive manufacturing: A new frontier in layer-less 3D printing
Whyte, D. J., Doeven, E. H., Sutti, A., Kouzani, A. Z., & Adams, S. D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104094 · Cited by 73
3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review
Tamo, A. K., Djouonkep, L. D. W., & Selabi, N. B. S. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132123 · Cited by 77
Why choose 3D bioprinting? Part II: methods and bioprinters
He, Y., Gu, Z., Xie, M., Fu, J., & Lin, H. M. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00064-w · Cited by 76
Cells, Materials, and Fabrication Processes for Cardiac Tissue Engineering
Montero, P., Flandes‐Iparraguirre, M., Musquiz, S., Pérez-Araluce, M., Plano, D., Sanmartín, C., Orive, G., Gavira, J. J., Prósper, F., & Mazo, M. M. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00955 · Cited by 74
Huang, J., Ware, H. O. T., Hai, R., Shao, G., & Sun, C. (2021) · Advanced Materials · doi:10.1002/adma.202005672 · Cited by 79
One‐Step 3D Printing of Heart Patches with Built‐In Electronics for Performance Regulation
Asulin, M., Michael, I., Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202004205 · Cited by 77
Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages
Hua, W., Mitchell, K., Raymond, L., Godina, B., Zhao, D., Zhou, W., & Jin, Y. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00910 · Cited by 74
Debbi, L., Zohar, B., Shuhmaher, M., Shandalov, Y., Goldfracht, I., & Levenberg, S. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121286 · Cited by 74
Li, X., Zheng, F., Wang, X., Geng, X., Zhao, S., Liu, H., Dou, D., Leng, Y., Wang, L., & Yubo, F. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.649 · Cited by 84
“In another report, an engineered heart with cardiac ventricles, a product of co-bioprinting of collagen with cardiomyocytes, showed remarkable performance of synchronized contractions and directional action potential propagation[5].”
BackgroundMethod3D bioprinting advanced biomaterials for craniofacial and dental tissue engineering – A review
Xu, H., Zhang, Y., Zhang, Y., Zhao, Z., Xue, T., Wang, J., Li, M., Zhao, S., Zhang, H., & Ding, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112886 · Cited by 83
“Following this, the support material is melted at a temperature of 37 ◦ C to sacrifice the encapsulated material, resulting in a printed product with a hollow structure [60,100].”
Pu, X., Wu, Y., Liu, J., & Wu, B. (2024) · Chem & Bio Engineering · doi:10.1021/cbe.4c00024 · Cited by 77
Deng, C., Jin, Y., He, H., Ma, Z., Wang, W., Zhang, Y., Li, T., He, C., & Wang, J. (2021) · Biomaterials Science · doi:10.1039/d1bm00535a · Cited by 75
Zhang, K., Wang, Y., Wei, Q., Li, X., Guo, Y., & Zhang, S. (2021) · Gels · doi:10.3390/gels7030115 · Cited by 71
Microtissue‐Based Bioink as a Chondrocyte Microshelter for DLP Bioprinting
Xie, X., Wu, S., Mou, S., Guo, N., Wang, Z., & Sun, J. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201877 · Cited by 71
Introduction to the state-of-the-art 3D bioprinting methods, design, and applications in orthopedics
Semba, J. A., Mieloch, A. A., & Rybka, J. D. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00070 · Cited by 75
Xie, R., Liang, Z., Ai, Y., Zheng, W.-C., Xiong, J., Xu, P., Liu, Y., Ding, M., Gao, J., Wang, J., et al. (2020) · Nature Protocols · doi:10.1038/s41596-020-00442-9 · Cited by 73
Vessel-on-a-chip models for studying microvascular physiology, transport, and function in vitro
Moses, S. R., Adorno, J. J., Palmer, A. F., & Song, J. W. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00355.2020 · Cited by 80
3D electron-beam writing at sub-15 nm resolution using spider silk as a resist
Qin, N., Qian, Z., Zhou, C., Xia, X., & Tao, T. H. (2021) · Nature Communications · doi:10.1038/s41467-021-25470-1 · Cited by 70
Bakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Liu, Y., Zhang, Y., Mei, T., Cao, H., Hu, Y., Jia, W., Wang, J., Zhang, Z., Wang, Z., Le, W., et al. (2022) · Advanced Science · doi:10.1002/advs.202104299 · Cited by 76
Stem Cell-Laden Hydrogel-Based 3D Bioprinting for Bone and Cartilage Tissue Engineering
Yang, Z., Yi, P., Liu, Z., Zhang, W., Mei, L., Feng, C., Tu, C., & Li, Z. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.865770 · Cited by 78
3D-bioprinted human tissue and the path toward clinical translation
Bliley, J. M., Shiwarski, D. J., & Feinberg, A. W. (2022) · Science Translational Medicine · doi:10.1126/scitranslmed.abo7047 · Cited by 74
“Examples include printed interconnected networks from fugitive materials to form vascular-like channels within cell-laden hydrogels (9, 30), endothelialized channels to improve viability and function in liver (31) and bone constructs (9), and directly printing multiscale vascular-like networks in collagen and gelatin…”
BackgroundMethodInfluentialSelf-citationJafari, A., Niknezhad, S. V., Kaviani, M., Saleh, W. F., Wong, N., Vliet, P. P. V., Moraes, C., Ajji, A., Kadem, L., Azarpira, N., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202305188 · Cited by 76
Recent advances in bioprinting technologies for engineering hepatic tissue
Agarwal, T., Banerjee, D., Konwarh, R., Esworthy, T., Kumari, J., Onesto, V., Das, P., Lee, B. H., Wagener, F. A. D. T. G., Makvandi, P., et al. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112013 · Cited by 66
Sun, W., Williamson, A. S., Sukhnandan, R., Majidi, C., Yao, L., Feinberg, A. W., & Webster‐Wood, V. A. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202303659 · Cited by 71
Self-citationGogoi, D., Kumar, M., & Singh, J. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100159 · Cited by 80
Dynamic hydrogels for biofabrication: A review
Xu, R., Ooi, H. S., Bian, L., Ouyang, L., & Sun, W. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123266 · Cited by 74
Adaptive and context-aware volumetric printing
Florczak, S., Größbacher, G., Ribezzi, D., Longoni, A., Gueye, M., Grandidier, E., Malda, J., & Levato, R. (2025) · Nature · doi:10.1038/s41586-025-09436-7 · Cited by 72
“Examples include xolography, which inherently uses light-sheet optics 27 , multiphoton printing, acoustic-based printing 28,29 or extrusion printing in suspension baths 30 .”
Hinman, S. S., Wang, Y., Kim, R., & Allbritton, N. L. (2020) · Nature Protocols · doi:10.1038/s41596-020-00419-8 · Cited by 70
Biomechanical factors in three-dimensional tissue bioprinting
Ning, L., Gil, C. J., Hwang, B., Theus, A. S., Perez, L., Tomov, M. L., Bauser‐Heaton, H. D., & Serpooshan, V. (2020) · Applied Physics Reviews · doi:10.1063/5.0023206 · Cited by 69
Chen, M., Li, Y., Liu, S., Feng, Z., Wang, H., Yang, D., Guo, W., Yuan, Z., Gao, S., Zhang, Y., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.12.009 · Cited by 62
“Regarding clinical applications, although cell-based tissue-engineered strategies have been shown to be effective in repairing cartilage defects [35,36] and great progress has been made in cell-loaded 3D printing [37,38], cell-free scaffolds have attracted more attention for translation, and the acellular concept has…”
BackgroundHarnessing organs-on-a-chip to model tissue regeneration
Tavakol, D. N., Fleischer, S., & Vunjak-Novakovic, G. (2021) · Cell Stem Cell · doi:10.1016/j.stem.2021.05.008 · Cited by 63
“With major developments in high-resolution 3D biomanufacturing techniques, many groups, including the Feinberg and Lewis teams, have independently pursued the integration of perfusable vasculature into bioprinting of human organs—in the heart and kidney, as examples (Homan et al., 2019; Lee et al., 2019; Skylar-Scott…”
BackgroundRecent advances in bioprinting technologies for engineering cardiac tissue
Agarwal, T., Fortunato, G. M., Hann, S.-Y., Ayan, B., Vajanthri, K. Y., Presutti, D., Cui, H., Chan, A., Costantini, M., Onesto, V., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112057 · Cited by 71
Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning
Weeks, R. D., Truby, R. L., Uzel, S. G. M., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202206958 · Cited by 70
Collagen-based bioinks for regenerative medicine: Fabrication, application and prospective
Li, Z., Ruan, C., & Niu, X. (2023) · Medicine in Novel Technology and Devices · doi:10.1016/j.medntd.2023.100211 · Cited by 72
Rasekh, M., Arshad, M. S., & Ahmad, Z. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17040456 · Cited by 68
3D Patterning within Hydrogels for the Recreation of Functional Biological Environments
Primo, G. A., & Mata, Á. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009574 · Cited by 69
Engineered Vasculature for Organ-on-a-Chip Systems
Aazmi, A., Zhou, H., Li, Y., Yu, M., Xu, X., Wu, Y., Ma, L., Zhang, B., & Yang, H. (2021) · Engineering · doi:10.1016/j.eng.2021.06.020 · Cited by 69
Tashman, J. W., Shiwarski, D. J., Coffin, B. D., Ruesch, A., Lanni, F., Kainerstorfer, J. M., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac975e · Cited by 74
“0 gelatin microparticle support bath was prepared as previously described using a complex coacervation method to produce gelatin microparticles [4].”
InfluentialSelf-citationSacrificial capillary pumps to engineer multiscalar biological forms
Sundaram, S., Lee, J., Bjørge, I. M., Michas, C., Kim, S., Lammers, A., Mano, J. F., Eyckmans, J., White, A. E., & Chen, C. S. (2024) · Nature · doi:10.1038/s41586-024-08175-5 · Cited by 68
Tashman, J. W., Shiwarski, D. J., & Feinberg, A. W. (2021) · HardwareX · doi:10.1016/j.ohx.2020.e00170 · Cited by 67
“0 update to the FRESH technique has dramatically improved overall print quality and required new extrusion hardware to achieve the maximum resolution and fidelity of our printed constructs [4].”
BackgroundSelf-citationKahn-Krell, A. M., Pretorius, D., Guragain, B., Lou, X., Wei, Y., Zhang, J., Qiao, A., Nakada, Y., Kamp, T. J., Ye, L., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.908848 · Cited by 66
“This process, with the potential to be scaled, advances on previous cardiac spheroid models (Giacomelli et al., 2017; Voges et al., 2017; Lee et al., 2019b; Helms et al., 2019; Keung et al., 2019; Beauchamp et al., 2020; Buono et al., 2020; Giacomelli et al., 2020; Israeli et al., 2020; Kupfer et…”
BackgroundResultChen, L., Wei, X., Gu, D., Xu, Y., & Zhou, H. (2023) · Cancer Letters · doi:10.1016/j.canlet.2022.216048 · Cited by 61
Shi, H., Li, Y., Xu, K., & Yin, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100799 · Cited by 66
Printable Ink Design towards Customizable Miniaturized Energy Storage Devices
Zhao, J., Lu, H., Zhao, X., Malyi, O. I., Peng, J., Lu, C., Li, X., Zhang, Y., Zeng, Z., Xing, G., et al. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00176 · Cited by 66
Tunable Microgel‐Templated Porogel (MTP) Bioink for 3D Bioprinting Applications
Ouyang, L., Wojciechowski, J. P., Tang, J., Guo, Y., & Stevens, M. M. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200027 · Cited by 71
Application Status of Sacrificial Biomaterials in 3D Bioprinting
Liu, S., Wang, T., Li, S., & Wang, X. (2022) · Polymers · doi:10.3390/polym14112182 · Cited by 67
“(b,h,i,j,k) are from reference [38], Reprinted with permission from Ref.”
BackgroundMethodInfluentialWychowaniec, J. K., & Brougham, D. F. (2022) · Advanced Science · doi:10.1002/advs.202202278 · Cited by 68
Bioprinting Technologies and Bioinks for Vascular Model Establishment
Kong, Z., & Wang, X. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24010891 · Cited by 65
“printed human heart components at various scales, from capillaries to whole organs in 2019 [76].”
Background3D Bioprinting for Vascularization
Mir, A., Lee, E., Shih, W., Koljaka, S., Wang, A., Jorgensen, C., Hurr, R., Dave, A., Sudheendra, K., & Hibino, N. (2023) · Bioengineering · doi:10.3390/bioengineering10050606 · Cited by 74
“Furthermore, in vivo VEGF-exposed collagen disks have demonstrated vascularization after 10 days compared to vascularization in non-VEGF-exposed cases [18].”
Background3D bioprinting for organ and organoid models and disease modeling
Juraski, A. D. C., Sharma, S., Sparanese, S., da Silva, V. A., Wong, J., Laksman, Z., Flannigan, R. K., Rohani, L., & Willerth, S. M. (2023) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2023.2234280 · Cited by 71
“However, challenges remain in optimizing the materials, processes, and biological factors to create fully functional, electromechanically viable cardiac constructs that closely mimic the native heart [45,46].”
BackgroundRecent advances in 3D-printing-based organ-on-a-chip
Wu, X., Shi, W., Liu, X., & Gu, Z. (2024) · EngMedicine · doi:10.1016/j.engmed.2024.100003 · Cited by 68
Direct ink writing of polymer‐based materials—A review
Li, C., Feng, C., Zhang, L., Zhang, L., & Wang, L. (2024) · Polymer Engineering and Science · doi:10.1002/pen.27038 · Cited by 65
Trends in Double Networks as Bioprintable and Injectable Hydrogel Scaffolds for Tissue Regeneration
Aldana, A. A., Houben, S., Moroni, L., Baker, M. B., & Pitet, L. M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01749 · Cited by 66
Li, J., Yang, F., Long, Y., Dong, Y., Wang, Y., & Wang, X. (2021) · ACS Nano · doi:10.1021/acsnano.1c05003 · Cited by 64
Biobridge: An Outlook on Translational Bioinks for 3D Bioprinting
Gu, Y., Forget, A., & Shastri, V. P. (2021) · Advanced Science · doi:10.1002/advs.202103469 · Cited by 66
A road map on synthetic strategies and applications of biodegradable polymers
Meghana, M. C., Nandhini, C., Benny, L., George, L., & Varghese, A. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04565-9 · Cited by 69
“Therefore, thermoresponsive biodegradable polymers are used for 3D printing of hydrogels such as collagen and gelatin and notably widening the range of printable materials for tissue regeneration [99].”
Advanced strategies in the application of gelatin-based bioink for extrusion bioprinting
Yang, J., He, H., Li, D., Zhang, Q., Xu, L., & Ruan, C. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00236-4 · Cited by 66
Developments of additive manufacturing and 5D printing in tissue engineering
Lai, J., & Wang, M. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01193-5 · Cited by 68
“…ligament [39, 40, 93], muscle [96], vasculature [42, 44, 65, 100, 101, 104], neural tissue [67, 106, 133], bladder [112, 113], liver [116], heart [120, 122] Metal Mg alloys, Ti–6Al–4V Bone [4, 45, 140], osteochondral tissue [20], tendon and ligament [29] Ceramic H ydroxyapatite (HAp),…”
BackgroundMethodInfluentialUltrahigh-printing-speed photoresists for additive manufacturing
Liu, T., Tao, P., Wang, X., Wang, H., He, M., Wang, Q., Cui, H., Wang, J., Tang, Y., Tang, J., et al. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01517-w · Cited by 63
“…have been widely employed in various fields such as microfluidics 1 , micromachines 2 , photonic crystals 3 , flexible electronics 4 , energy storage devices 5,6 , chemical reac-tionware 7 and tissue engineering 8,9 , due to their arbitrary complex three-dimensional (3D) manufacturing ability.”
Accelerating cardiovascular research: recent advances in translational 2D and 3D heart models
Mohr, E., Thum, T., & Bär, C. (2022) · European Journal of Heart Failure · doi:10.1002/ejhf.2631 · Cited by 63
DLP-based bioprinting of void-forming hydrogels for enhanced stem-cell-mediated bone regeneration
Tao, J., Zhu, S., Liao, X., Wang, Y., Zhou, N., Li, Z., Wan, H., Tang, Y., Yang, S., Du, T., et al. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100487 · Cited by 63
“The contact between the structured porous hydrogels and surrounding tissues can significantly promote tissue ingrowth, angiogenesis, and interface fusion [24,34].”
BackgroundPramanick, A., Hayes, T., Sergis, V., McEvoy, E., Pandit, A. S., & Daly, A. C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414559 · Cited by 67
Materials and device strategies to enhance spatiotemporal resolution in bioelectronics
Zhang, J., Cheng, Z., Li, P., & Tian, B. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00798-y · Cited by 70
“The resolution, dictated by nozzle size, enables micrometre-scale accuracy and offers adaptability for real-time, in situ device deployment 102–104 , 106 .”
Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology
Pradhan, S., Banda, O. A., Farino, C. J., Sperduto, J. L., Keller, K. A., Taitano, R. A., & Slater, J. H. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901255 · Cited by 64
Biohybrid Actuators for Soft Robotics: Challenges in Scaling Up
Won, P., Ko, S. H., Majidi, C., Feinberg, A. W., & Webster‐Wood, V. A. (2020) · Actuators · doi:10.3390/act9040096 · Cited by 68
“Such techniques include bio-printing, subtractive patterning and sacrificial patter ing, which primarily rely on ce l a ff t i techniques [21,25,26].”
BackgroundMethodInfluentialSelf-citationRecent Advances in Microfluidic Platforms for Programming Cell‐Based Living Materials
Zhang, P., Shao, N., & Qin, L. (2021) · Advanced Materials · doi:10.1002/adma.202005944 · Cited by 63
Gong, Z., Huang, L., Tang, X., Chen, K., Wu, Z., Zhang, L., Sun, Y., Xia, Y., Chen, H., Wei, Y., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101312 · Cited by 64
Guimarães, C. F., Marques, A. P., & Reis, R. L. (2022) · Advanced Materials · doi:10.1002/adma.202105645 · Cited by 65
Zhang, S., Cheng, Q., Zhang, W., Zhou, H., Wu, N., Yang, M. Y., Meng, S., Liu, Z., & Kong, T. (2022) · Advanced Materials · doi:10.1002/adma.202209263 · Cited by 69
Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions
Romanazzo, S., Molley, T. G., Nemec, S. R., Lin, K., Sheikh, R. H., Gooding, J. J., Wan, B., Li, Q., Kilian, K. A., & Roohani, I. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008216 · Cited by 62
Park, Y., Chung, T. S., Lee, G., & Rogers, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00639 · Cited by 62
Latest Advances in 3D Bioprinting of Cardiac Tissues
Jafari, A., Ajji, Z., Mousavi, A., Naghieh, S., Bencherif, S. A., & Savoji, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101636 · Cited by 63
Application of Hydrogels as Three-Dimensional Bioprinting Ink for Tissue Engineering
Xie, M., Su, J., Zhou, S., Li, J., & Zhang, K. (2023) · Gels · doi:10.3390/gels9020088 · Cited by 65
Zhao, T., Liu, Y., Wu, Y., Zhao, M., & Zhao, Y. (2023) · Biotechnology Advances · doi:10.1016/j.biotechadv.2023.108243 · Cited by 63
Liu, T., Wang, Y., & Kuang, T. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300246 · Cited by 62
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 69
“For solid tissues such as the heart, for example, the initial and pivotal step in this direction is the engineering of small organs that replicate physiological functions and act as models for evaluating drug toxicity and establishing patient-specific heart disease models [143,299].”
Embedded 3D printing of multi-internal surfaces of hydrogels
Zhao, J., Hussain, M., Wang, M., Li, Z., & He, N. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101097 · Cited by 67
Colloidal multiscale porous adhesive (bio)inks facilitate scaffold integration
Mostafavi, A., Samandari, M., Karvar, M., Ghovvati, M., Endo, Y., Sinha, I., Annabi, N., & Tamayol, A. (2021) · Applied Physics Reviews · doi:10.1063/5.0062823 · Cited by 61
“59 Therefore, a hydrogel with optimal printability and biocompatibility is an essential requirement for extrusion-based 3D bioprinting.”
Barreiro, D. L., Minten, I. J., Thies, J., & Sagt, C. M. J. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00145 · Cited by 64
Schätzlein, E., & Blaeser, A. (2022) · Communications Biology · doi:10.1038/s42003-022-03593-5 · Cited by 62
Regulable Supporting Baths for Embedded Printing of Soft Biomaterials with Variable Stiffness
Li, Q., Ma, L., Gao, Z., Yin, J., Liu, P., Yang, H., Shen, L., & Zhou, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c09221 · Cited by 61
Lan, X., Liang, Y., Erkut, E. J. N., Kunze, M., Mulet‐Sierra, A., Gong, T., Osswald, M., Ansari, K., Seikaly, H. R., Boluk, Y., et al. (2021) · The FASEB Journal · doi:10.1096/fj.202002081r · Cited by 65
Progress of 3D Bioprinting in Organ Manufacturing
Song, D., Xu, Y., Liu, S., Wen, L., & Wang, X. (2021) · Polymers · doi:10.3390/polym13183178 · Cited by 62
Sun, W., Schaffer, S., Dai, K., Yao, L., Feinberg, A. W., & Webster‐Wood, V. A. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.673533 · Cited by 61
“Adapted from (Lee et al., 2019) ©2019 AAAS.”
MethodInfluentialSelf-citationO'Shea, D. G., Curtin, C. M., & O’Brien, F. J. (2022) · Biomaterials Science · doi:10.1039/d1bm01540k · Cited by 65
3D bioprinting of corneal models: A review of the current state and future outlook
Balters, L., & Reichl, S. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231197793 · Cited by 62
Recent innovations in interfacial strategies for DLP 3D printing process optimization
Wu, L., & Song, Y. (2025) · Materials Horizons · doi:10.1039/d4mh01160k · Cited by 60
Lai, Y., Xiao, X., Huang, Z., Duan, H., Yang, L., Yang, Y.-C., Li, C., & Feng, L. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms252312567 · Cited by 64
“As a result, the printing accuracy is limited to around 100 µ m [68,69].”
Mu, R., de Souza, S. C., Liao, Z., Dong, L., & Wang, C. (2022) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2022.114298 · Cited by 59
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.