3D bioprinting of collagen to rebuild components of the human heart
Open accessThe DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Abstract
If I only had a heart: 3D bioprinting is still a fairly new technique that has been limited in terms of resolution and by the materials that can be printed. Lee et al. describe a 3D printing technique to build complex collagen scaffolds for engineering biological tissues (see the Perspective by Dasgupta and Black). Collagen gelation was controlled by modulation of pH and could provide up to 10-micrometer resolution on printing. Cells could be embedded in the collagen or pores could be introduced into the scaffold via embedding of gelatin spheres. The authors demonstrated successful 3D printing of five components of the human heart spanning capillary to full-organ scale, which they validated for tissue and organ function. Science , this issue p. 482 ; see also p. 446
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe cited source doesn’t support the claim as written.
In the citing paper
“Some of these more complex engineered cardiac chambers lack functional readouts, thus, limiting their use for drug testing and disease modeling (Esser et al., 2023; Xie et al., 2023; Lee et al., 2019).”
From Mini-hearts for disease modeling and drug testing – process optimization versus biological functionality (2026) · cites this paper as Lee et al., 2019
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these tissues are limited to a single ventricle model and thus lack the capacity for perfusion.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Specifically, Lee et al., printed a support material (i.e., type I collagen) as a “shell” that is filled with cardiomyocytes in a fibrinogen suspension at a concentration of 300 million cells per milliliter8.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In fact, the only 3D printed, volume-holding structure to successfully demonstrate cardiac function is a single ventricle model.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [8]
Experimental — accuracy not yet measured
10 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
VEGF receptor signalling ? in control of vascular function
Olsson, A.-K., Dimberg, A., Kreuger, J., & Claesson-Welsh, L. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1911 · Cited by 3,122
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
Chemically defined generation of human cardiomyocytes
Burridge, P. W., Matsa, E., Shukla, P., Lin, Z. C., Churko, J. M., Ebert, A. D., Lan, F., Diecke, S., Huber, B., Mordwinkin, N. M., et al. (2014) · Nature Methods · doi:10.1038/nmeth.2999 · Cited by 1,606
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Engineered biomaterials for in situ tissue regeneration
Gaharwar, A. K., Singh, I., & Khademhosseini, A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0209-x · Cited by 859
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Xolography for linear volumetric 3D printing
Regehly, M., Garmshausen, Y., Reuter, M., König, N. F., Israel, E., Kelly, D. P., Chou, C.-Y., Koch, K., Asfari, B., & Hecht, S. (2020) · Nature · doi:10.1038/s41586-020-3029-7 · Cited by 527
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
“from Carnegie Mellon University succeeded n bioprinting components of human heart at various scales, rom capillaries to the full organ, employing an optimized echnique based on FRESH we discussed above [22 ,54] .”
BackgroundMethodSynthetic hydrogels: Synthesis, novel trends, and applications
Madduma‐Bandarage, U. S. K., & Madihally, S. V. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50376 · Cited by 517
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Engineering the next generation of cell-based therapeutics
Bashor, C. J., Hilton, I. B., Bandukwala, H., Smith, D. M., & Veiseh, O. (2022) · Nature Reviews Drug Discovery · doi:10.1038/s41573-022-00476-6 · Cited by 439
Recapitulating macro-scale tissue self-organization through organoid bioprinting
Brassard, J. A., Nikolaev, M., Hübscher, T., Hofer, M., & Lutolf, M. P. (2021) · Nature Materials · doi:10.1038/s41563-020-00803-5 · Cited by 469
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Collagen‐based biomaterials for biomedical applications
Rezvani Ghomi, E., Nourbakhsh, N., Akbari Kenari, M., Zare, M., & Ramakrishna, S. (2021) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34881 · Cited by 406
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
3D printing of Haversian bone–mimicking scaffolds for multicellular delivery in bone regeneration
Zhang, M., Lin, R., Wang, X., Xue, J., Deng, C., Feng, C., Zhuang, H., Ma, J., Qin, C., Wan, L., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz6725 · Cited by 387
“3D printing has even been used to prepare complicated artificial heart (14) and lung tissues (15).”
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
Daly, A. C., Prendergast, M. E., Hughes, A. J., & Burdick, J. A. (2021) · Cell · doi:10.1016/j.cell.2020.12.002 · Cited by 332
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Rapid fabrication of physically robust hydrogels
Bao, B., Zeng, Q., Li, K., Wen, J., Zhang, Y., Zheng, Y., Zhou, R., Shi, C., Chen, T., Xiao, C., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01648-4 · Cited by 293
Kang, D.-H., Louis, F., Liu, H., Shimoda, H., Nishiyama, Y., Nozawa, H., Kakitani, M., Takagi, D., Kasa, D., Nagamori, E., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25236-9 · Cited by 307
Kupfer, M. E., Lin, W.-H., Ravikumar, V., Qiu, K., Wang, L., Gao, L., Bhuiyan, D. B., Lenz, M., Ai, J., Mahutga, R. R., et al. (2020) · Circulation Research · doi:10.1161/circresaha.119.316155 · Cited by 329
Noninvasive in vivo 3D bioprinting
Chen, Y., Zhang, J., Liu, X., Wang, S., Tao, J., Huang, Y., Wu, W., Li, Y., Zhou, K., Wei, X., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba7406 · Cited by 316
Campbell, S. B., Wu, Q., Yazbeck, J., Liu, C., Okhovatian, S., & Radisic, M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00640 · Cited by 297
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Gao, Y., Peng, K., & Mitragotri, S. (2021) · Advanced Materials · doi:10.1002/adma.202006362 · Cited by 295
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 284
“The most recent advances relating to 3D bioprinting of organs have seen the use of suspension media as a technological printing aid, specifically within the cardiac TE field [11,35].”
BackgroundMethodInfluentialYao, B., Chandrasekaran, S., Zhang, H., Ma, A., Kang, J., Zhang, L., Lu, X., Qian, F., Zhu, C., Duoss, E. B., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906652 · Cited by 305
Cheng, T., Zhang, Y., Wang, S., Chen, Y., Gao, S., Wang, F., Lai, W., & Huang, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101303 · Cited by 308
Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks
Ouyang, L., Armstrong, J. P. K., Lin, Y., Wojciechowski, J. P., Lee-Reeves, C., Hachim, D., Zhou, K., Burdick, J. A., & Stevens, M. M. (2020) · Science Advances · doi:10.1126/sciadv.abc5529 · Cited by 293
FRESH 3D Bioprinting a Full-Size Model of the Human Heart
Mirdamadi, E., Tashman, J. W., Shiwarski, D. J., Palchesko, R. N., & Feinberg, A. W. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01133 · Cited by 292
Self-citationBioinspired mineralized collagen scaffolds for bone tissue engineering
Li, Z., Du, T., Ruan, C., & Niu, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.004 · Cited by 272
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Current Insights into Collagen Type I
Naomi, R., Ridzuan, P. M., & Bahari, H. (2021) · Polymers · doi:10.3390/polym13162642 · Cited by 254
“At the same time, Col-I as a bio-ink has been speculated as a highly compatible biomaterial, since it plays a critical role in ECM, can enhance the uniformity in structural and tissue arrangement, can increase mechanical strength, and can act as a template for tissue adhesion and signaling molecules [110].”
BackgroundGoldfracht, I., Protze, S., Shiti, A., Setter, N., Gruber, A., Shaheen, N., Nartiss, Y., Keller, G., & Gepstein, L. (2020) · Nature Communications · doi:10.1038/s41467-019-13868-x · Cited by 263
Harnessing Endogenous Stimuli for Responsive Materials in Theranostics
Cook, A. B., & Decuzzi, P. (2021) · ACS Nano · doi:10.1021/acsnano.0c09115 · Cited by 262
Engineering the multiscale complexity of vascular networks
O’Connor, C., Brady, E., Zheng, Y., Moore, E., & Stevens, K. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00447-8 · Cited by 271
Polymeric Systems for Bioprinting
Bedell, M. L., Navara, A. M., Du, Y., Zhang, S., & Mikos, A. G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00834 · Cited by 258
Natural-Based Hydrogels for Tissue Engineering Applications
Gomez-Florit, M., Pardo, A., Domingues, R. M. A., Graça, A. L., Babo, P. S., Reis, R. L., & Gomes, M. E. (2020) · Molecules · doi:10.3390/molecules25245858 · Cited by 246
“Reproduced with permission from [21], copyright 2019, Springer Nature; (B) Volumetric bioprinting using gelatin with methacryloyl residues (GelMA).”
BackgroundMethodInfluentialBioengineered human blood vessels
Niklason, L. E., & Lawson, J. H. (2020) · Science · doi:10.1126/science.aaw8682 · Cited by 254
“Lee and colleagues recently described the “freeform reversible embedding of suspended hydrogels” (“FRESH”) method, which allows the extrusion of acid-solubilized collagen into a bath of controlled temperature and pH that drives rapid collagen selfassembly (71).”
Next-generation tissue-engineered heart valves with repair, remodelling and regeneration capacity
Fioretta, E. S., Motta, S. E., Lintas, V., Loerakker, S., Parker, K. K., Baaijens, F. P. T., Falk, V., Hoerstrup, S. P., & Emmert, M. Y. (2021) · Nature Reviews Cardiology · doi:10.1038/s41569-020-0422-8 · Cited by 262
Collagen as Bioink for Bioprinting: A Comprehensive Review
Osidak, E. O., Kozhukhov, V. I., Osidak, M. S., & Domogatsky, S. P. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v6i3.270 · Cited by 253
“Collagen I type C2C12 and hESC-CMs pH and temperature FRESH In vitro Extrusion-based bioprinting [15]”
BackgroundMethodInfluential3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2022) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 240
Three-dimensional printing of soft hydrogel electronics
Hui, Y., Yao, Y., Qian, Q., Luo, J., Chen, H., Qiao, Z., Yu, Y., Tao, L., & Zhou, N. (2022) · Nature Electronics · doi:10.1038/s41928-022-00887-8 · Cited by 239
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237
Soft Bioelectronics Based on Nanomaterials
Cho, K. W., Sunwoo, S.-H., Hong, Y. J., Koo, J. H., Kim, J. H., Baik, S., Hyeon, T., & Kim, D.-H. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00531 · Cited by 244
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi-Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 239
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Natural Biomaterials and Their Use as Bioinks for Printing Tissues
Benwood, C., Chrenek, J., Kirsch, R. L., Masri, N. Z., Richards, H., Teetzen, K., & Willerth, S. M. (2021) · Bioengineering · doi:10.3390/bioengineering8020027 · Cited by 219
“A proof of concept for this is FRESH, an innovative printing method used to print a human heart along with a functional tri-leaflet heart valve composed of collagen [82].”
MethodEmergence of FRESH 3D printing as a platform for advanced tissue biofabrication
Shiwarski, D. J., Hudson, A. R., Tashman, J. W., & Feinberg, A. W. (2021) · APL Bioengineering · doi:10.1063/5.0032777 · Cited by 216
Self-citationDynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Xenotransplantation: Current Status in Preclinical Research
Lu, T., Yang, B., Wang, R., & Qin, C. (2020) · Frontiers in Immunology · doi:10.3389/fimmu.2019.03060 · Cited by 213
“They demonstrated that cells could be embedded in the collagen to construct functional tissue and organs in vitro (204).”
BackgroundMicro/nano functional devices fabricated by additive manufacturing
Huang, Z., Shao, G., & Li, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101020 · Cited by 224
Strong Tough Polyampholyte Hydrogels via the Synergistic Effect of Ionic and Metal–Ligand Bonds
Huang, Y., Xiao, L., Zhou, J., Liu, T., Yan, Y., Long, S., & Li, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103917 · Cited by 222
Natural and Synthetic Bioinks for 3D Bioprinting
Khoeini, R., Nosrati, H., Akbarzadeh, A., Eftekhari, A., Kavetskyy, T., Khalilov, R., Ahmadian, E., Nasibova, A., Datta, P., Roshangar, L., et al. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000097 · Cited by 196
Soft three-dimensional network materials with rational bio-mimetic designs
Yan, D., Chang, J., Zhang, H., Liu, J., Song, H., Xue, Z., Zhang, F., & Zhang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-14996-5 · Cited by 203
From Arteries to Capillaries: Approaches to Engineering Human Vasculature
Fleischer, S., Tavakol, D. N., & Vunjak‐Novakovic, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910811 · Cited by 195
Printability in extrusion bioprinting
Fu, Z., Naghieh, S., Xu, C., Wang, C., Sun, W., & Chen, X. (2021) · Biofabrication · doi:10.1088/1758-5090/abe7ab · Cited by 196
“…[22], hierarchical machine learning [61] Bioprinting parameters In-process control Sensing and control system [90], control based on data-driven model [94] Sacrificial support framework Alginate impregnating on gelatin framework [95] Microgel: gelatin [98], gellan [109] Indirect bioprinting”
3D-printable plant protein-enriched scaffolds for cultivated meat development
Ianovici, I., Zagury, Y., Redenski, I., Lavon, N., & Levenberg, S. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121487 · Cited by 206
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Advanced Bottom‐Up Engineering of Living Architectures
Gaspar, V. M., Lavrador, P., Borges, J., Oliveira, M. B., & Mano, J. F. (2020) · Advanced Materials · doi:10.1002/adma.201903975 · Cited by 204
3D Printing: Applications in Tissue Engineering, Medical Devices, and Drug Delivery
Pavan Kalyan, B., & Kumar, L. (2022) · AAPS PharmSciTech · doi:10.1208/s12249-022-02242-8 · Cited by 190
“Lee and his associates (63) employed collagen to generate cardiac tissues that mimicked the physiological”
BackgroundMethod3D bioprinting in cardiac tissue engineering
Wang, Z., Wang, L., Li, T., Liu, S., Guo, B., Huang, W., & Wu, Y. (2021) · Theranostics · doi:10.7150/thno.61621 · Cited by 185
“Luckily, the emerging concept of using a reversible support bath to enable freeform reversible embedding of suspended hydrogels bioprinting is valid for most low-viscosity materials and makes it possible to print any complicated structure without the design of extra support [85].”
BackgroundInfluentialSustainable Materials and Chemical Processes for Additive Manufacturing
Sanchez-Rexach, E., Johnston, T. G., Jehanno, C., Sardon, H., & Nelson, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02008 · Cited by 196
Mirshafiei, M., Rashedi, H., Yazdian, F., Rahdar, A., & Baino, F. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112853 · Cited by 177
Chitosan-based inks for 3D printing and bioprinting
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Hosseini Rad, S., Naderi, G., Saeb, M. R., et al. (2022) · Green Chemistry · doi:10.1039/d1gc01799c · Cited by 191
Advances in Engineering Human Tissue Models
Moysidou, C.-M., Barberio, C., & Owens, R. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.620962 · Cited by 179
Liu, Y., Peng, L., Li, L., Huang, C., Shi, K., Meng, X., Wang, P., Wu, M., Li, L., Cao, H., et al. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121216 · Cited by 185
Szklanny, A. A., Machour, M., Redenski, I., Chochola, V., Goldfracht, I., Kaplan, B., Epshtein, M., Simaan Yameen, H., Merdler, U., Feinberg, A., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102661 · Cited by 178
Self-citationGe, B., Wang, H., Li, J., Liu, H., Yin, Y., Zhang, N., & Qin, S. (2020) · Marine Drugs · doi:10.3390/md18040178 · Cited by 179
Liu, F., Liu, X., Chen, F., & Fu, Q. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101472 · Cited by 181
Advances in the Fabrication of Biomaterials for Gradient Tissue Engineering
Li, C., Ouyang, L., Armstrong, J. P. K., & Stevens, M. M. (2021) · Trends in Biotechnology · doi:10.1016/j.tibtech.2020.06.005 · Cited by 190
Shin, Y. J., Shafranek, R. T., Tsui, J. H., Walcott, J., Nelson, A., & Kim, D.-H. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.006 · Cited by 174
Self-enhancing sono-inks enable deep-penetration acoustic volumetric printing
Kuang, X., Rong, Q., Belal, S., Vu, T., López López, A. M., Wang, N., Arıcan, M. O., Garciamendez-Mijares, C. E., Chen, M., Yao, J., et al. (2023) · Science · doi:10.1126/science.adi1563 · Cited by 165
Current standards and ethical landscape of engineered tissues—3D bioprinting perspective
Sekar, M. P., Budharaju, H., Zennifer, A., Sethuraman, S., Vermeulen, N., Sundaramurthi, D., & Kalaskar, D. M. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211027677 · Cited by 195
From Protein Building Blocks to Functional Materials
Shen, Y., Levin, A., Kamada, A., Toprakcioglu, Z., Rodriguez-Garcia, M., Xu, Y., & Knowles, T. P. J. (2021) · ACS Nano · doi:10.1021/acsnano.0c08510 · Cited by 177
Research progress in decellularized extracellular matrix-derived hydrogels
Zhang, W., Du, A., Liu, S., Lv, M., & Chen, S. (2021) · Regenerative Therapy · doi:10.1016/j.reth.2021.04.002 · Cited by 169
Designing Scaffolds for Corneal Regeneration
Ahearne, M., Fernández‐Pérez, J., Masterton, S., Madden, P. W., & Bhattacharjee, P. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908996 · Cited by 174
Qu, J., Kalyani, F. S., Liu, L., Cheng, T., & Chen, L. (2021) · Cancer Communications · doi:10.1002/cac2.12224 · Cited by 159
“Bio-printing can also allow the production of multiple scales of vasculature, enabling the growth of larger organoids [150].”
BackgroundChallenges and opportunities for the next generation of cardiovascular tissue engineering
Cho, S., Discher, D. E., Leong, K. W., Vunjak-Novakovic, G., & Wu, J. C. (2022) · Nature Methods · doi:10.1038/s41592-022-01591-3 · Cited by 176
Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth
Zhang, H., Cong, Y., Osi, A. R., Zhou, Y., Huang, F., Zaccaria, R. P., Chen, J., Wang, R., & Fu, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910573 · Cited by 172
Biomaterials and 3D Bioprinting Strategies to Model Glioblastoma and the Blood–Brain Barrier
Tang, M., Rich, J. N., & Chen, S. (2021) · Advanced Materials · doi:10.1002/adma.202004776 · Cited by 160
Maloney, E., Clark, C., Sivakumar, H., Yoo, K., Aleman, J., Rajan, S. A. P., Forsythe, S., Mazzocchi, A., Laxton, A. W., Tatter, S. B., et al. (2020) · Micromachines · doi:10.3390/mi11020208 · Cited by 161
“This includes laser-induced forward transfer bioprinting [35] and freeform reversible embedding of suspended hydrogels (FRESH) bioprinting [36,37] (from which we certainly have taken inspiration), among others.”
BackgroundHuman‐Recombinant‐Elastin‐Based Bioinks for 3D Bioprinting of Vascularized Soft Tissues
Lee, S., Sani, E. S., Spencer, A. R., Guan, Y., Weiss, A. S., & Annabi, N. (2020) · Advanced Materials · doi:10.1002/adma.202003915 · Cited by 169
Biofabrication of natural hydrogels for cardiac, neural, and bone Tissue engineering Applications
Elkhoury, K., Morsink, M., Sanchez-Gonzalez, L., Kahn, C., Tamayol, A., & Arab-Tehrany, E. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.040 · Cited by 162
“method called FRESH (freeform reversible embedding of suspended hydrogels) [96].”
MethodInfluentialBreaking the resolution limits of 3D bioprinting: future opportunities and present challenges
Zandrini, T., Florczak, S., Levato, R., & Ovsianikov, A. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.10.009 · Cited by 174
Engineering of Hydrogel Materials with Perfusable Microchannels for Building Vascularized Tissues
Xie, R., Zheng, W., Guan, L., Ai, Y., & Liang, Q. (2020) · Small · doi:10.1002/smll.201902838 · Cited by 167
3D Bioprinting of Vascularized Tissues for in vitro and in vivo Applications
Chen, E. P., Toksoy, Z., Davis, B. A., & Geibel, J. P. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.664188 · Cited by 161
Ning, L., Mehta, R., Cao, C., Theus, A., Tomov, M., Zhu, N., Weeks, E. R., Bauser-Heaton, H., & Serpooshan, V. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15078 · Cited by 164
Application of Collagen-Based Hydrogel in Skin Wound Healing
Zhang, Y., Wang, Y., Li, Y., Yang, Y., Jin, M., Lin, X., Zhuang, Z., Guo, K., Zhang, T., & Tan, W. (2023) · Gels · doi:10.3390/gels9030185 · Cited by 158
“Hydrogel materials can meet this requirement and have a promising application potential as cell-friendly materials [91].”
BackgroundMultimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering
Chen, A., Wang, W., Mao, Z., He, Y., Chen, S., Liu, G., Su, J. D., Feng, P., Shi, Y., Yan, C., et al. (2023) · Advanced Materials · doi:10.1002/adma.202307686 · Cited by 180
Recent advances and challenges in materials for 3D bioprinting
Mao, H., Yang, L., Zhu, H., Wu, L., Ji, P., Yang, J., & Gu, Z. (2020) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2020.09.015 · Cited by 158
Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine
Chung, J. J., Im, H.-J., Kim, S. H., Park, J. W., & Jung, Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.586406 · Cited by 172
3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery
Zoabi, A., Redenski, I., Oren, D., Kasem, A., Zigron, A., Daoud, S., Moskovich, L., Kablan, F. K., & Srouji, S. (2022) · Journal of Clinical Medicine · doi:10.3390/jcm11092385 · Cited by 196
3D Printing of Microgel Scaffolds with Tunable Void Fraction to Promote Cell Infiltration
Seymour, A. J., Shin, S., & Heilshorn, S. C. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100644 · Cited by 166
Metadata
- Authors
- Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Lee, A.
- Hudson, A. R.
- Feinberg, A. W.
- ORCID
- Venue
- Science
- Published
- 2019-08-02
- Volume
- 365
- Issue
- 6452
- Pages
- 482-487
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2965443828
- Cited by
- 1,782
- References
- 28
- Citations by year
- 2026: 158 · 2025: 244 · 2024: 262 · 2023: 287 · 2022: 275 · 2021: 310 · 2020: 223 · 2019: 20
- FWCI
- 73.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-sa
- Locations
- Science (publishedVersion, cc-by-sa)
- PubMed (publishedVersion)
- Funders
- National Science Foundation (1454248)
- National Institutes of Health (DP2HL117750, R21HD090679)
- Office of Naval Research (N00014-17-1-2566)
- U.S. Food and Drug Administration (R01FD006582)
- Congressionally Directed Medical Research Programs (W81XWH1610018)
- Carnegie Mellon University (Manufacturing Futures Initiative, Bioengineered Organs Initiative)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, collagen, cardiac tissue engineering, collagen scaffolds, cardiac ventricle, human cardiomyocytes, action potential propagation, microvascularization, extracellular matrix
- MeSH terms
- Collagen, Extracellular Matrix, Heart Ventricles, Humans, Hydrogen-Ion Concentration, Models, Anatomic, Neovascularization, Physiologic, Hydrogels, Myocytes, Cardiac, X-Ray Microtomography, Microvessels, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.