The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Open accessAbstract
Additive manufacturing has already been established as a highly versatile manufacturing technique with demonstrated potential to completely transform conventional manufacturing in the future. The objective of this paper is to review the latest progress and challenges associated with the fabrication of multi-material parts using additive manufacturing technologies. Various manufacturing processes and materials used to produce functional components were investigated and summarized. The latest applications of multi-material additive manufacturing (MMAM) in the automotive, aerospace, biomedical and dentistry fields were demonstrated. An investigation on the current challenges was also carried out to predict the future direction of MMAM processes. It was concluded that further research and development is needed in the design of multi-material interfaces, manufacturing processes and the material compatibility of MMAM parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Soft Robotics: Biological Inspiration, State of the Art, and Future Research
Trivedi, D., Rahn, C. D., Kier, W. M., & Walker, I. D. (2008) · Applied Bionics and Biomechanics · doi:10.1080/11762320802557865 · Cited by 1,708
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
An efficient 3D topology optimization code written in Matlab
Liu, K., & Tovar, A. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1107-x · Cited by 649
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
3D Printing multifunctionality: structures with electronics
Espalin, D., Muse, D. W., MacDonald, E., & Wicker, R. B. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5717-7 · Cited by 614
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Functionally Graded Composite Materials: An Overview
Gururaja, U., Rao, S. S., & Gangadharan, K. V. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.442 · Cited by 466
Hybrid additive and subtractive machine tools – Research and industrial developments
Flynn, J. M., Shokrani, A., Newman, S. T., & Dhokia, V. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2015.11.007 · Cited by 459
Bobbio, L. D., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z., & Beese, A. M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.070 · Cited by 447
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Yin, J., Lu, C., Fu, J., Huang, Y., & Zheng, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.029 · Cited by 360
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Wei, C., & Li, L. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1928520 · Cited by 316
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Joung, D., Truong, V., Neitzke, C. C., Guo, S., Walsh, P. J., Monat, J. R., Meng, F., Park, S. H., Dutton, J. R., Parr, A. M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801850 · Cited by 306
Multi-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
4D printing of materials for the future: Opportunities and challenges
Joshi, S., Rawat, K., C, K., Rajamohan, V., Mathew, A. T., Koziol, K., Kumar Thakur, V., & A.S.S, B. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100490 · Cited by 288
Recent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Hybrid metal additive manufacturing: A state–of–the-art review
Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F. (2021) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2021.100032 · Cited by 256
A Review on Filament Materials for Fused Filament Fabrication
Dey, A., Roan Eagle, I. N., & Yodo, N. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5030069 · Cited by 252
Chung, H., & Das, S. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.112 · Cited by 245
Putra, N. E., Mirzaali, M. J., Apachitei, I., Zhou, J., & Zadpoor, A. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.037 · Cited by 243
Sing, S. L., Lam, L. P., Zhang, D. Q., Liu, Z. H., & Chua, C. K. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.07.007 · Cited by 238
Laser processing of SiC-particle-reinforced coating on titanium
Das, M., Balla, V. K., Basu, D., Bose, S., & Bandyopadhyay, A. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.04.044 · Cited by 233
Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.015 · Cited by 228
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Kokkinis, D., Bouville, F., & Studart, A. R. (2018) · Advanced Materials · doi:10.1002/adma.201705808 · Cited by 212
Lopes, L. R., Silva, A. F., & Carneiro, O. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.027 · Cited by 211
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Singh, R., Kumar, R., Farina, I., Colangelo, F., Feo, L., & Fraternali, F. (2019) · Polymers · doi:10.3390/polym11010062 · Cited by 194
Roach, D. J., Hamel, C. M., Dunn, C. K., Johnson, M. V., Kuang, X., & Qi, H. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100819 · Cited by 191
Additive Manufacturing Technology: Potential Implications for U.S. Manufacturing CompetitivenessPreprint
Ford, S. L. N. (2014) · SSRN Electronic Journal · Cited by 190
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Christ, J. F., Aliheidari, N., Pötschke, P., & Ameli, A. (2018) · Polymers · doi:10.3390/polym11010011 · Cited by 184
Ke, D., Vu, A. A., Bandyopadhyay, A., & Bose, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.041 · Cited by 177
The trends and challenges of fiber reinforced additive manufacturing
Fidan, I., Imeri, A., Gupta, A., Hasanov, S., Nasirov, A., Elliott, A., Alifui-Segbaya, F., & Nanami, N. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03269-7 · Cited by 170
Self-citationMulti-material selective laser melting of Fe/Al-12Si components
Demir, A. G., & Previtali, B. (2017) · Manufacturing Letters · doi:10.1016/j.mfglet.2017.01.002 · Cited by 167
On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications
Kumar, R., Singh, R., & Farina, I. (2018) · PSU Research Review · doi:10.1108/prr-07-2018-0018 · Cited by 157
Functionally Graded Alloys Obtained by Additive Manufacturing
Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H. A., & Schwarze, D. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201300579 · Cited by 135
Structural performance of additive manufactured metallic material and cross-sections
Buchanan, C., Matilainen, V., Salminen, A., & Gardner, L. (2017) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2017.05.002 · Cited by 135
Bobbio, L. D., Bocklund, B. J., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B. W., Liu, Z., & Beese, A. M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.156 · Cited by 135
Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling
Lopez, D. M. B., & Ahmad, R. (2020) · Polymers · doi:10.3390/polym12030651 · Cited by 134
A New Global Approach to Design for Additive Manufacturing
Ponche, R., Hascoët, J.-Y., Kerbrat, O., & Mognol, P. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.679499 · Cited by 126
Design and additive manufacture of functionally graded structures based on digital materials
Ituarte, I. F., Boddeti, N., Hassani, V., Dunn, M. L., & Rosen, D. W. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100839 · Cited by 119
Tensile properties of multi-material interfaces in 3D printed parts
Lumpe, T. S., Mueller, J., & Shea, K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.024 · Cited by 118
Selective laser melting of tungsten-copper functionally graded material
Tan, C., Zhou, K., & Kuang, T. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.11.127 · Cited by 114
Chueh, Y., Wei, C., Zhang, X., & Li, L. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100928 · Cited by 109
Hasanov, S., Gupta, A., Nasirov, A., et al. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.09.011 · Cited by 96
Self-citationTopology optimization and 3D printing of multimaterial magnetic actuators and displays
Sundaram, S., Skouras, M., Kim, D. S., van den Heuvel, L., & Matusik, W. (2019) · Science Advances · doi:10.1126/sciadv.aaw1160 · Cited by 92
Zhuang, Y., Song, W., Ning, G., Sun, X., Sun, Z., Xu, G., Zhang, B., Chen, Y., & Tao, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.047 · Cited by 89
Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling
Jiang, S., Liao, G., Xu, D., Liu, F., Li, W., Cheng, Y., Li, Z., & Xu, G. J. (2018) · High Performance Polymers · doi:10.1177/0954008317752822 · Cited by 84
Experimental Characterization of the Shear Properties of 3D–Printed ABS and Polycarbonate Parts
Rohde, S., Cantrell, J. T., Jerez, A., et al. (2017) · Experimental Mechanics · doi:10.1007/s11340-017-0343-6 · Cited by 79
Nasirov, A., Gupta, A., Hasanov, S., & Fidan, I. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108269 · Cited by 77
Self-citationBrischetto, S., Ferro, C. G., Torre, R., & Maggiore, P. (2018) · Curved and Layered Structures · doi:10.1515/cls-2018-0007 · Cited by 75
Khondoker, M. A. H., Asad, A., & Sameoto, D. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2017-0046 · Cited by 74
Cámara-Torres, M., Duarte, S., Sinha, R., Egizabal, A., Álvarez, N., Bastianini, M., Sisani, M., Scopece, P., Scatto, M., Bonetto, A., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.031 · Cited by 69
Nasirov, A., & Fidan, I. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103372 · Cited by 68
Self-citationYusuf, S. M., Zhao, X. L., Yang, S., & Gao, N. (2020) · Materials Letters · doi:10.1016/j.matlet.2020.128928 · Cited by 61
Development of di-methacrylate quaternary ammonium monomers with antibacterial activity
Fanfoni, L., Marsich, E., Turco, G., Breschi, L., & Cadenaro, M. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.05.012 · Cited by 58
Freund, R., Watschke, H., Heubach, J., & Vietor, T. (2019) · Applied Sciences · doi:10.3390/app9091782 · Cited by 54
Hinges for origami-inspired structures by multimaterial additive manufacturing
Wagner, M. A., Huang, J.-L., Okle, P., Paik, J. K., & Spolenak, R. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108643 · Cited by 50
Ultra-strong bond interface in additively manufactured iron-based multi-materials
Tan, C., Wang, D., Ma, W., & Zhou, K. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.140642 · Cited by 50
Application of responsive polymers in implantable medical devices and biosensors
Li, J., Stachowski, M., & Zhang, Z. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-713-2.00011-0 · Cited by 49
Printing polymer blends through in situ active mixing during fused filament fabrication
Kennedy, Z. C., & Christ, J. F. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101233 · Cited by 47
Mohammadizadeh, M., Gupta, A., & Fidan, I. (2021) · Journal of Composite Materials · doi:10.1177/00219983211020070 · Cited by 45
Self-citationKluczyński, J., Śnieżek, L., Kravcov, A., Grzelak, K., Svoboda, P., Szachogłuchowicz, I., Franek, O., Morozov, N., Torzewski, J., & Kubeček, P. (2020) · Materials · doi:10.3390/ma13040903 · Cited by 38
Customizable drug tablets with constant release profiles via 3D printing technology
Tan, Y. J. N., Yong, W. P., Low, H. R., et al. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120370 · Cited by 37
Temperature Influence on Bond Formation in Multi-material Joining by Forging
Wohletz, S., & Groche, P. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.10.271 · Cited by 34
Guessasma, S., Nouri, H., & Roger, F. (2017) · Polymers · doi:10.3390/polym9080372 · Cited by 34
Functionally graded 3D structures produced by laser cladding
del Val, J., Arias-González, F., Barro, Ó., Riveiro, A., Comesaña, R., Penide, J., Lusquiños, F., Bountinguiza, M., Quintero, F., & Pou, J. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.029 · Cited by 29
Characterizing material transitions in large-scale Additive Manufacturing
Brackett, J., Yan, Y., Cauthen, D., Kishore, V., Lindahl, J. M., Smith, T., Sudbury, Z., Ning, H., Kunc, V., & Duty, C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101750 · Cited by 28
Functionally Graded Composites: Processing and Applications
Ahankari, S. S., & Kar, K. K. (2016) · Springer eBooks · doi:10.1007/978-3-662-49514-8_4 · Cited by 23
Stoner, B. E., Bartolai, J., Kaweesa, D. V., Meisel, N. A., & Simpson, T. W. (2017) · JOM · doi:10.1007/s11837-017-2669-z · Cited by 22
Sheydaeian, E. (2017) · UWSpace (University of Waterloo) · Cited by 2
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A.
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2021-12-27
- Volume
- 6
- Issue
- 1
- Pages
- 4
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W4226466684
- Cited by
- 258
- References
- 98
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.