The DOI matches its Crossref record; 260 of the 260 references it cites were found in a registry or an index.
Recent Advances in Bioplastics: Application and Biodegradation
Open accessAbstract
The success of oil-based plastics and the continued growth of production and utilisation can be attributed to their cost, durability, strength to weight ratio, and eight contributions to the ease of everyday life. However, their mainly single use, durability and recalcitrant nature have led to a substantial increase of plastics as a fraction of municipal solid waste. The need to substitute single use products that are not easy to collect has inspired a lot of research towards finding sustainable replacements for oil-based plastics. In addition, specific physicochemical, biological, and degradation properties of biodegradable polymers have made them attractive materials for biomedical applications. This review summarises the advances in drug delivery systems, specifically design of nanoparticles based on the biodegradable polymers. We also discuss the research performed in the area of biophotonics and challenges and opportunities brought by the design and application of biodegradable polymers in tissue engineering. We then discuss state-of-the-art research in the design and application of biodegradable polymers in packaging and emphasise the advances in smart packaging development. Finally, we provide an overview of the biodegradation of these polymers and composites in managed and unmanaged environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Microplastics in the marine environment
Andrady, A. L. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.05.030 · Cited by 8,105
Foreign body reaction to biomaterials
Anderson, J. M., Rodriguez, A., & Chang, D. T. (2008) · Seminars in Immunology · doi:10.1016/j.smim.2007.11.004 · Cited by 5,138 · cited 1×
“However, this composite induced diffuse foreign body reactions and granulocytic inflammations in porcine animal models, thereby posing a barrier for in vivo implantation [190].”
BackgroundNanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
River plastic emissions to the world’s oceans
Lebreton, L. C. M., van der Zwet, J., Damsteeg, J.-W., Slat, B., Andrady, A., & Reisser, J. (2017) · Nature Communications · doi:10.1038/ncomms15611 · Cited by 4,011
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
The hierarchical structure and mechanics of plant materials
Gibson, L. J. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0341 · Cited by 1,215
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Toxic Pollutants from Plastic Waste- A Review
Verma, R., Vinoda, K. S., Papireddy, M., & Gowda, A. N. S. (2016) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2016.07.069 · Cited by 1,052
Nanocellulose: Extraction and application
Phanthong, P., Reubroycharoen, P., Hao, X., Xu, G., Abudula, A., & Guan, G. (2018) · Carbon Resources Conversion · doi:10.1016/j.crcon.2018.05.004 · Cited by 1,028
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics
Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 937
Plastic waste associated with disease on coral reefs
Lamb, J. B., Willis, B. L., Fiorenza, E. A., Couch, C. S., Howard, R., Rader, D. N., True, J. D., Kelly, L. A., Ahmad, A., Jompa, J., et al. (2018) · Science · doi:10.1126/science.aar3320 · Cited by 857
Phthalates and other additives in plastics: human exposure and associated health outcomes
Meeker, J. D., Sathyanarayana, S., & Swan, S. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0268 · Cited by 835
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Bacterial synthesis of biodegradable polyhydroxyalkanoates
Verlinden, R. A. J., Hill, D. J., Kenward, M. A., Williams, C. D., & Radecka, I. (2007) · Journal of Applied Microbiology · doi:10.1111/j.1365-2672.2007.03335.x · Cited by 773
Multifunctional materials for implantable and wearable photonic healthcare devices
Lee, G.-H., Moon, H., Kim, H., Lee, G. H., Kwon, W., Yoo, S., Myung, D., Yun, S. H., Bao, Z., & Hahn, S. K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0167-3 · Cited by 667
Narancic, T., Verstichel, S., Reddy Chaganti, S., Morales-Gamez, L., Kenny, S. T., De Wilde, B., Babu Padamati, R., & O’Connor, K. E. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02963 · Cited by 632
Self-citationApplication of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583 · cited 1×
“For example, the addition of oil-based, but biodegradable polycaprolactone (PCL) to PLA at different loads improved the flexibility of PLA [1,251,252].”
BackgroundSerruys, P. W., Chevalier, B., Dudek, D., Cequier, A., Carrié, D., Iniguez, A., Dominici, M., van der Schaaf, R. J., Haude, M., Wasungu, L., et al. (2015) · The Lancet · doi:10.1016/s0140-6736(14)61455-0 · Cited by 564
Yao, Q., Cosme, J. G. L., Xu, T., Miszuk, J. M., Picciani, P. H. S., Fong, H., & Sun, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.018 · Cited by 543
Polyhydroxyalkanoates, biopolyesters from renewable resources: Physiological and engineering aspects
Braunegg, G., Lefebvre, G., & Genser, K. F. (1998) · Journal of Biotechnology · doi:10.1016/s0168-1656(98)00126-6 · Cited by 536
Plastic bacteria? Progress and prospects for polyhydroxyalkanoate production in bacteria
Lee, S. Y. (1996) · Trends in Biotechnology · doi:10.1016/0167-7799(96)10061-5 · Cited by 529
Medical applications of poly-4-hydroxybutyrate: A strong flexible absorbable biomaterial
Martin, D. P., & Williams, S. F. (2003) · Biochemical Engineering Journal · doi:10.1016/s1369-703x(03)00040-8 · Cited by 510
Lyu, Y., Fang, Y., Miao, Q., Zhen, X., Ding, D., & Pu, K. (2016) · ACS Nano · doi:10.1021/acsnano.6b00168 · Cited by 502
Bacterial Cellulose: Production, Modification and Perspectives in Biomedical Applications
Gorgieva, S., & Trček, J. (2019) · Nanomaterials · doi:10.3390/nano9101352 · Cited by 497
Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride
Zhang, J.-F., & Sun, X. (2004) · Biomacromolecules · doi:10.1021/bm0400022 · Cited by 494
Steinbüchel, A., & Lütke-Eversloh, T. (2003) · Biochemical Engineering Journal · doi:10.1016/s1369-703x(03)00036-6 · Cited by 470
Superhydrophobic materials for biomedical applications
Falde, E. J., Yohe, S. T., Colson, Y. L., & Grinstaff, M. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.050 · Cited by 468
Lei, T., Guan, M., Liu, J., Lin, H.-C., Pfattner, R., Shaw, L., McGuire, A. F., Huang, T.-C., Shao, L., Cheng, K.-T., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1701478114 · Cited by 464
Yan, B., Boyer, J.-C., Branda, N. R., & Zhao, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja209793b · Cited by 455
Thermal, mechanical and morphological characterization of plasticized PLA–PHB blends
Abdelwahab, M. A., Flynn, A., Chiou, B.-S., Imam, S., Orts, W., & Chiellini, E. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.036 · Cited by 454
Sung, Y.-C., Jin, P.-R., Chu, L.-A., Hsu, F.-F., Wang, M.-R., Chang, C.-C., Chiou, S.-J., Qiu, J. T., Gao, D.-Y., Lin, C.-C., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0570-3 · Cited by 452
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Vahedikia, N., Garavand, F., Tajeddin, B., Cacciotti, I., Jafari, S. M., Omidi, T., & Zahedi, Z. (2019) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2019.01.045 · Cited by 437
Thermoplastic starches: Properties, challenges, and prospects
Mohammadi Nafchi, A., Moradpour, M., Saeidi, M., & Alias, A. K. (2013) · Starch - Stärke · doi:10.1002/star.201200201 · Cited by 433
Biopolymer-based functional composites for medical applications
Park, S.-B., Lih, E., Park, K.-S., Joung, Y. K., & Han, D. K. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.003 · Cited by 429
On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Arrieta, M., Samper, M., Aldas, M., & López, J. (2017) · Materials · doi:10.3390/ma10091008 · Cited by 415
Bacterial polyhydroxyalkanoates: Still fabulous?
Możejko-Ciesielska, J., & Kiewisz, R. (2016) · Microbiological Research · doi:10.1016/j.micres.2016.07.010 · Cited by 410
Present and future development in plastics from biomass
Shen, L., Worrell, E., & Patel, M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.189 · Cited by 409
Photo-responsive polymers: synthesis and applications
Bertrand, O., & Gohy, J.-F. (2017) · Polymer Chemistry · doi:10.1039/c6py01082b · Cited by 364
Palanikumar, L., Al-Hosani, S., Kalmouni, M., Nguyen, V. P., Ali, L., Pasricha, R., Barrera, F. N., & Magzoub, M. (2020) · Communications Biology · doi:10.1038/s42003-020-0817-4 · Cited by 360
Thermoplastic Starch: A Possible Biodegradable Food Packaging Material—A Review
Khan, B., Bilal Khan Niazi, M., Samin, G., & Jahan, Z. (2017) · Journal of Food Process Engineering · doi:10.1111/jfpe.12447 · Cited by 358
Thermoplastic Starch Processing and Characteristics—A Review
Zhang, Y., Rempel, C., & Liu, Q. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.636156 · Cited by 348
Yeo, J. C. C., Muiruri, J. K., Thitsartarn, W., Li, Z., & He, C. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.11.006 · Cited by 343
Medium chain length polyhydroxyalkanoates, promising new biomedical materials for the future
Rai, R., Keshavarz, T., Roether, J. A., Boccaccini, A. R., & Roy, I. (2011) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2010.11.002 · Cited by 342
A multipurpose natural and renewable polymer in medical applications: Bacterial cellulose
de Oliveira Barud, H. G., da Silva, R. R., da Silva Barud, H., Tercjak, A., Gutierrez, J., Lustri, W. R., de Oliveira, O. B., & Ribeiro, S. J. L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.059 · Cited by 340
Biodegradable blends and composites of polycaprolactone and starch derivatives
Koenig, M. F., & Huang, S. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90934-t · Cited by 336
Mai, Y.-W., & Yu, Z.-Z. (2006) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845691127 · Cited by 336
Trends in antimicrobial food packaging systems: Emitting sachets and absorbent pads
Otoni, C. G., Espitia, P. J. P., Avena-Bustillos, R. J., & McHugh, T. H. (2016) · Food Research International · doi:10.1016/j.foodres.2016.02.018 · Cited by 334
Early In Vivo Experience With Tissue-Engineered Trileaflet Heart Valves
Sodian, R., Hoerstrup, S. P., Sperling, J. S., Daebritz, S., Martin, D. P., Moran, A. M., Kim, B. S., Schoen, F. J., Vacanti, J. P., & Mayer, J. E. (2000) · Circulation · doi:10.1161/01.cir.102.suppl_3.iii-22 · Cited by 330
Evolution of macromolecular complexity in drug delivery systems
Kakkar, A., Traverso, G., Farokhzad, O. C., Weissleder, R., & Langer, R. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0063 · Cited by 320
Design, clinical translation and immunological response of biomaterials in regenerative medicine
Sadtler, K., Singh, A., Wolf, M. T., Wang, X., Pardoll, D. M., & Elisseeff, J. H. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.40 · Cited by 319
Towards bio-upcycling of polyethylene terephthalate
Tiso, T., Narancic, T., Wei, R., Pollet, E., Beagan, N., Schröder, K., Honak, A., Jiang, M., Kenny, S. T., Wierckx, N., et al. (2021) · Metabolic Engineering · doi:10.1016/j.ymben.2021.03.011 · Cited by 315
Self-citationPreethi Soundarya, S., Haritha Menon, A., Viji Chandran, S., & Selvamurugan, N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.056 · Cited by 305
Materials derived from biomass/biodegradable materials.
Luzier, W. D. (1992) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.89.3.839 · Cited by 300
A fully organic retinal prosthesis restores vision in a rat model of degenerative blindness
Maya-Vetencourt, J. F., Ghezzi, D., Antognazza, M. R., Colombo, E., Mete, M., Feyen, P., Desii, A., Buschiazzo, A., Di Paolo, M., Di Marco, S., et al. (2017) · Nature Materials · doi:10.1038/nmat4874 · Cited by 290
Bioplastics and food packaging: A review
Jabeen, N., Majid, I., & Nayik, G. A. (2015) · Cogent Food & Agriculture · doi:10.1080/23311932.2015.1117749 · Cited by 288
Von Hoff, D. D., Mita, M. M., Ramanathan, R. K., Weiss, G. J., Mita, A. C., LoRusso, P. M., Burris, H. A., Hart, L. L., Low, S. C., Parsons, D. M., et al. (2016) · Clinical Cancer Research · doi:10.1158/1078-0432.ccr-15-2548 · Cited by 286
Glutathione responsive polymers and their application in drug delivery systems
Quinn, J. F., Whittaker, M. R., & Davis, T. P. (2017) · Polymer Chemistry · doi:10.1039/c6py01365a · Cited by 280
Environmental science and engineering applications of nanocellulose-based nanocomposites
Wei, H., Rodriguez, K., Renneckar, S., & Vikesland, P. J. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00059e · Cited by 277
Delgado, L. M., Bayon, Y., Pandit, A., & Zeugolis, D. I. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0290 · Cited by 272
Kenny, S. T., Runic, J. N., Kaminsky, W., Woods, T., Babu, R. P., Keely, C. M., Blau, W., & O’Connor, K. E. (2008) · Environmental Science & Technology · doi:10.1021/es801010e · Cited by 271
Self-citationEngineering biomaterials to integrate and heal: The biocompatibility paradigm shifts
Bryers, J. D., Giachelli, C. M., & Ratner, B. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24559 · Cited by 271
Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00129 · Cited by 262
High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003) · Polymer · doi:10.1016/s0032-3861(02)00907-2 · Cited by 260
Structure-properties of super-tough PLA alloy with excellent heat resistance
Hashima, K., Nishitsuji, S., & Inoue, T. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.045 · Cited by 256
Narancic, T., & O'Connor, K. E. (2019) · Microbiology · doi:10.1099/mic.0.000749 · Cited by 252
Self-citationJeong, S. I., Kim, B.-S., Kang, S. W., Kwon, J. H., Lee, Y. M., Kim, S. H., & Kim, Y. H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.057 · Cited by 247
Tian, H., Yan, J., Rajulu, A. V., Xiang, A., & Luo, X. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.12.067 · Cited by 241
Wei, D., Dao, J., & Chen, G. (2018) · Advanced Materials · doi:10.1002/adma.201802273 · Cited by 240
Bioabsorbable polymer optical waveguides for deep-tissue photomedicine
Nizamoglu, S., Gather, M. C., Humar, M., Choi, M., Kim, S., Kim, K. S., Hahn, S. K., Scarcelli, G., Randolph, M., Redmond, R. W., et al. (2016) · Nature Communications · doi:10.1038/ncomms10374 · Cited by 237
Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review
Jin, F.-L., Hu, R.-R., & Park, S.-J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.078 · Cited by 233
Mensitieri, G., Di Maio, E., Buonocore, G. G., Nedi, I., Oliviero, M., Sansone, L., & Iannace, S. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2010.10.001 · Cited by 218
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
Fourati, Y., Tarrés, Q., Mutjé, P., & Boufi, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.008 · Cited by 201
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
Koh, J. J., Zhang, X., & He, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.048 · Cited by 200
Effect of polyvinyl alcohol on the physicochemical properties of biodegradable starch films
Gómez-Aldapa, C. A., Velazquez, G., Gutierrez, M. C., Rangel-Vargas, E., Castro-Rosas, J., & Aguirre-Loredo, R. Y. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122027 · Cited by 197
Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites
Mokhena, T. C., Sefadi, J. S., Sadiku, E. R., John, M. J., Mochane, M. J., & Mtibe, A. (2018) · Polymers · doi:10.3390/polym10121363 · Cited by 193
Shao, X., Goh, J. C. H., Hutmacher, D. W., Lee, E. H., & Zigang, G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1539 · Cited by 185
Mechanical properties and biodegradation characteristics of PHB-based films
Savenkova, L., Gercberga, Z., Nikolaeva, V, Dzene, A., Bibers, I., & Kalnin, M. (2000) · Process Biochemistry · doi:10.1016/s0032-9592(99)00107-7 · Cited by 183
Ahn, H. K., Jung, M., Sym, S. J., Shin, D. B., Kang, S. M., Kyung, S. Y., Park, J.-W., Jeong, S. H., & Cho, E. K. (2014) · Cancer Chemotherapy and Pharmacology · doi:10.1007/s00280-014-2498-5 · Cited by 183
Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)
Aliotta, L., Cinelli, P., Coltelli, M. B., Righetti, M. C., Gazzano, M., & Lazzeri, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.041 · Cited by 183
Application and design of esterase-responsive nanoparticles for cancer therapy
Dong, H., Pang, L., Cong, H., Shen, Y., & Yu, B. (2019) · Drug Delivery · doi:10.1080/10717544.2019.1588424 · Cited by 182
The host response to naturally-derived extracellular matrix biomaterials
Morris, A. H., Stamer, D. K., & Kyriakides, T. R. (2017) · Seminars in Immunology · doi:10.1016/j.smim.2017.01.002 · Cited by 180
Wu, Z., Wu, J., Peng, T., Li, Y., Lin, D., Xing, B., Li, C., Yang, Y., Yang, L., Zhang, L., et al. (2017) · Polymers · doi:10.3390/polym9030102 · Cited by 178
Qian, S., Zhang, H., Yao, W., & Sheng, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.040 · Cited by 177
Ostafinska, A., Fortelny, I., Nevoralova, M., Hodan, J., Kredatusova, J., & Slouf, M. (2015) · RSC Advances · doi:10.1039/c5ra21178f · Cited by 176
Self-Healing, Self-Assembled β-Sheet Peptide–Poly(γ-glutamic acid) Hybrid Hydrogels
Clarke, D. E., Pashuck, E. T., Bertazzo, S., Weaver, J. V. M., & Stevens, M. M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00528 · Cited by 176
Ding, W., Jahani, D., Chang, E., Alemdar, A., Park, C. B., & Sain, M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.003 · Cited by 175
Biopolymers: Applications and Trends
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-00936-7 · Cited by 172
The behaviour of neural stem cells on polyhydroxyalkanoate nanofiber scaffolds
Xu, X.-Y., Li, X.-T., Peng, S.-W., Xiao, J.-F., Liu, C., Fang, G., Chen, K. C., & Chen, G.-Q. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.132 · Cited by 170
The production of polyhydroxyalkanoates in recombinant Escherichia coli
Li, R., Zhang, H., & Qi, Q. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.09.014 · Cited by 170
Yu, J., & Chen, L. X. L. (2008) · Environmental Science & Technology · doi:10.1021/es7032235 · Cited by 168
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Lanzotti, A., Martorelli, M., Maietta, S., Gerbino, S., Penta, F., & Gloria, A. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.030 · Cited by 162
Li, W.-J., Chiang, H., Kuo, T.-F., Lee, H.-S., Jiang, C.-C., & Tuan, R. S. (2009) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.127 · Cited by 160
Brennan, M. P., Dardik, A., Hibino, N., Roh, J. D., Nelson, G. N., Papademitris, X., Shinoka, T., & Breuer, C. K. (2008) · Annals of Surgery · doi:10.1097/sla.0b013e318184dcbd · Cited by 157
Applications of Polyhydroxyalkanoates in the Medical Industry
Brigham, & Sinskey (2012) · International Journal of Biotechnology for Wellness Industries · doi:10.6000/1927-3037.2012.01.01.03 · Cited by 154
Direct Electrical Neurostimulation with Organic Pigment Photocapacitors
Rand, D., Jakešová, M., Lubin, G., Vėbraitė, I., David‐Pur, M., Đerek, V., Cramer, T., Sariçiftçi, N. S., Hanein, Y., & Głowacki, E. D. (2018) · Advanced Materials · doi:10.1002/adma.201707292 · Cited by 152
Nisbet, D. R., Rodda, A. E., Horne, M. K., Forsythe, J. S., & Finkelstein, D. I. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.011 · Cited by 150
Conversion of post consumer polyethylene to the biodegradable polymer polyhydroxyalkanoate
Guzik, M. W., Kenny, S. T., Duane, G. F., Casey, E., Woods, T., Babu, R. P., Nikodinović‐Runić, J., Murray, M. T., & O’Connor, K. E. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-5489-2 · Cited by 150
Self-citationZhang, X., Zheng, Y., Wang, Z., Huang, S., Chen, Y., Jiang, W., Zhang, H., Ding, M., Li, Q., Xiao, X., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.036 · Cited by 147
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Preparation of Nanocellulose: A Review
Islam, M. T., Alam, M. M., Patrucco, A., Montarsolo, A., & Zoccola, M. (2014) · AATCC Journal of Research · doi:10.14504/ajr.1.5.3 · Cited by 146
In vivo monitoring of function of autologous engineered pulmonary valve
Gottlieb, D., Tandon, K., Emani, S. M., Aïkawa, E., Brown, D. W., Powell, A. J., Nedder, A. P., Engelmayr, G. C., Melero‐Martin, J. M., Sacks, M. S., et al. (2010) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2009.11.006 · Cited by 144
Hypoxia-Responsive Polymersomes for Drug Delivery to Hypoxic Pancreatic Cancer Cells
Kulkarni, P., Haldar, M. K., You, S., Choi, Y., & Mallik, S. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00350 · Cited by 144
Stone, G. W., Ellis, S. G., Gori, T., Metzger, D. C., Stein, B., Erickson, M., Torzewski, J., Williams, J. E., Lawson, W. B., Broderick, T. M., et al. (2018) · The Lancet · doi:10.1016/s0140-6736(18)32283-9 · Cited by 144
Polyhydroxyalkanoates: Chemical Modifications Toward Biomedical Applications
Kai, D., & Loh, X. J. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400340p · Cited by 141
Cacciotti, I., Fortunati, E., Puglia, D., Kenny, J. M., & Nanni, F. M. C. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.052 · Cited by 140
Chemical functionality of multidomain peptide hydrogels governs early host immune response
Lopez‐Silva, T. L., Leach, D. G., Azares, A. R., Li, I.-C., Woodside, D. G., & Hartgerink, J. D. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119667 · Cited by 139
Sadowska, J. M., Wei, F., Guo, J., Guillem‐Marti, J., Lin, Z., Ginebra, M., & Xiao, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.057 · Cited by 136
Householder, K. T., DiPerna, D. M., Chung, E. P., Wohlleb, G. M., Dhruv, H., Berens, M. E., & Sirianni, R. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.01.002 · Cited by 135
Determination of multiple thermal degradation mechanisms of poly(3-hydroxybutyrate)
Ariffin, H., Nishida, H., Shirai, Y., & Hassan, M. A. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.020 · Cited by 133
Cacciotti, I., Mori, S., Cherubini, V., & Nanni, F. M. C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.018 · Cited by 133
Antioxidant starch films containing sunflower hull extracts
Menzel, C., González‐Martínez, C., Chiralt, A., & Vilaplana, F. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.03.022 · Cited by 130
Dassanayake, R. S., Acharya, S., & Abidi, N. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.80898 · Cited by 128
Zhao, Y., Zou, B., Shi, Z., Wu, Q., & Chen, G. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.03.003 · Cited by 127
Huang, Q., Goh, J., Hutmacher, D. W., & Lee, E. H. (2002) · Tissue Engineering · doi:10.1089/107632702760184727 · Cited by 126
Llorens, E., Ibañez, H., del Valle, L. J., & Puiggalí, J. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.039 · Cited by 122
All-Biomaterial Laser using Vitamin and Biopolymers
Nizamoğlu, S., Gather, M. C., & Yun, S. H. (2013) · Advanced Materials · doi:10.1002/adma201300818 · Cited by 121
Zhang, C., Zhao, L., Dong, Y., Zhang, X., Lin, J., & Chen, Z. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.05.005 · Cited by 120
Lale, S. V., Kumar, A., Prasad, S., Bharti, A. C., & Koul, V. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00244 · Cited by 120
Milovanović, S. L., Hollermann, G., Errenst, C., Pajnik, J., Frerich, S., Kroll, S., Rezwan, K., & Ivanović, J. Z. (2018) · Food Research International · doi:10.1016/j.foodres.2018.02.065 · Cited by 116
Wang, T., Bruggeman, K. F., Kauhausen, J. A., Rodriguez, A. L., Nisbet, D. R., & Parish, C. L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.09.039 · Cited by 115
Heinrich, D., Madkour, M. H., Alghamdi, M. A., Shabbaj, I. I., & Steinbüchel, A. (2012) · AMB Express · doi:10.1186/2191-0855-2-59 · Cited by 114
Water vapour permeability of poly(lactic acid) nanocomposites
Duan, Z., Thomas, N. L., & Huang, W. B. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.06.008 · Cited by 111
Flexible biodegradable citrate-based polymeric step-index optical fiber
Shan, D., Zhang, C., Kalaba, S., Mehta, N., Kim, G. B., Liu, Z., & Yang, J. Y. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.003 · Cited by 111
Advances in drug delivery systems based on synthetic poly(hydroxybutyrate) (co)polymers
Barouti, G., Jaffredo, C. G., & Guillaume, S. M. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.05.002 · Cited by 109
Mohee, R., & Unmar, G. (2006) · Waste Management · doi:10.1016/j.wasman.2006.07.023 · Cited by 108
Ma, B., Han, J., Zhang, S., Liu, F., Wang, S., Duan, J., Sang, Y., Jiang, H., Li, D., Ge, S., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.033 · Cited by 107
Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release
Milovanović, S. L., Marković, D., Mraković, A., Kuska, R., Žižović, I., Frerich, S., & Ivanović, J. Z. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.106 · Cited by 107
Ruiz, C., Kenny, S. T., Narančić, T., Babu, R. P., & Connor, K. O. (2019) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2019.08.020 · Cited by 102
Suzuki, K., Tanaka, H., Ebara, M., Uto, K., Matsuoka, H., Nishimoto, S., Okada, K., Murase, T., & Yoshikawa, H. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.004 · Cited by 100
Polymeric biomaterials for biophotonic applications
Shan, D., Gerhard, E. M., Zhang, C., Tierney, J. W., Xie, D., Liu, Z., & Yang, J. Y. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.07.001 · Cited by 99
Electrospinning versus knitting: two scaffolds for tissue engineering of the aortic valve
Lieshout, V. M. M., Vaz, C. M., Rutten, M. C. M., Peters, G. G., & Baaijens, F. F. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856206774879153 · Cited by 98
Plastic Biodegradation: Challenges and Opportunities
Wierckx, N. J. P., Narančić, T., Eberlein, C., Wei, R., Drzyzga, O., Magnin, A., Ballerstedt, H., Kenny, S. T., Pollet, É., Avérous, L., et al. (2018) · Springer eBooks · doi:10.1007/978-3-319-44535-9_23-1 · Cited by 97
Self-citationA degradable brush polymer–drug conjugate for pH-responsive release of doxorubicin
Yu, Y., Chen, C.-K., Law, W., Sun, H., Prasad, P. N., & Cheng, C. (2014) · Polymer Chemistry · doi:10.1039/c4py01194e · Cited by 95
Plasticizing and anti-plasticizing effects of polyvinyl alcohol in blend with thermoplastic starch
Kahvand, F., & Fasihi, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.185 · Cited by 95
Chen, W., & Tong, Y. W. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.026 · Cited by 93
Washington, M. A., Balmert, S. C., Fedorchak, M. V., Little, S. R., Watkins, S. C., & Meyer, T. Y. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.043 · Cited by 93
Yang, Y., Li, X., Zhang, Q., Xia, C., Chen, C., Chen, X., & Yu, P. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2018.12.006 · Cited by 93
Kai, D., Zhang, K., Liow, S. S., & Loh, X. J. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00445 · Cited by 93
Lih, E., Park, K. W., Chun, S. Y., Kim, H., Kwon, T. G., Joung, Y. K., & Han, D. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03771 · Cited by 92
Microbial biotechnology addressing the plastic waste disaster
Narančić, T., & O’Connor, K. E. (2017) · Microbial Biotechnology · doi:10.1111/1751-7915.12775 · Cited by 91
Self-citationWebb, W. R., Dale, T. P., Lomas, A. J., Zeng, G., Wimpenny, I., Haj, A. J. E., Forsyth, N. R., & Chen, G. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.05.041 · Cited by 89
Zhang, Y., Ren, K., Zhang, X., Chao, Z., Yang, Y., Ye, D., Dai, Z. H., Liu, Y., & Ju, H. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.02.019 · Cited by 89
Xu, T., Yao, Q., Miszuk, J. M., Sanyour, H. J., Hong, Z., Sun, H., & Fong, H. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.004 · Cited by 89
Premature drug release of polymeric micelles and its effects on tumor targeting
Miller, T., Breyer, S., van Colen, G., Mier, W., Haberkorn, U., Geißler, S., Voss, S., Weigandt, M., & Göpferich, A. M. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.01.059 · Cited by 88
New Linear and Star‐Shaped Thermogelling Poly([R]‐3‐hydroxybutyrate) Copolymers
Barouti, G., Liow, S. S., Dou, Q., Ye, H., Orione, C., Guillaume, S. M., & Loh, X. J. (2016) · Chemistry - A European Journal · doi:10.1002/chem.201601404 · Cited by 87
Requena, R., Jiménez, A., Vargas, M., & Chiralt, A. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.09.022 · Cited by 87
Róz, A. L. D., Zambon, M. D., Curvelo, A. A. S., & Carvalho, A. J. F. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.015 · Cited by 86
D’Angelo, F., Armentano, I., Cacciotti, I., Tiribuzi, R., Quattrocelli, M., Gaudio, C. D., Fortunati, E., Saino, E., Caraffa, A., Cerulli, G. G., et al. (2012) · Biomacromolecules · doi:10.1021/bm3000716 · Cited by 85
Gutiérrez-Sánchez, M., Escobar‐Barrios, V. A., Pozos‐Guillén, A., & Escobar‐García, D. M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.003 · Cited by 83
Poly(3-hydroxyoctanoate), a promising new material for cardiac tissue engineering
Bagdadi, A. V., Safari, M., Dubey, P., Basnett, P., Sofokleous, P., Humphrey, E. J., Locke, I. C., Edirisinghe, M. J., Terracciano, C. M., Boccaccini, A. R., et al. (2016) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2318 · Cited by 82
Potas, J. R., Haque, F., Maclean, F. L., & Nisbet, D. R. (2015) · Journal of Immunological Methods · doi:10.1016/j.jim.2015.03.013 · Cited by 81
Kang, K. S., Lee, S. I., Lee, T. J., Narayan, R., & Shin, B. Y. (2008) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-008-0101-7 · Cited by 79
Unintended effects of drug carriers: Big issues of small particles
Parhiz, H., Khoshnejad, M., Myerson, J. W., Hood, E. D., Patel, P., Brenner, J. S., & Muzykantov, V. R. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.023 · Cited by 78
Wei, L., & McDonald, A. G. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41724 · Cited by 76
Davis, R., Duane, G. F., Kenny, S. T., Cerrone, F., Guzik, M. W., Babu, R. P., Casey, E., & O’Connor, K. E. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25474 · Cited by 76
Self-citationIotti, M., Fabbri, P., Messori, M., Pilati, F., & Fava, P. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0120-4 · Cited by 74
Biosynthesis and characterization of hydroxybutyrate-hydroxycaproate copolymers
Caballero, K. P., Karel, S. F., & Register, R. A. (1995) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(95)93522-y · Cited by 74
Ohura, T., Aoyagi, Y., Takagi, K.-I., Yoshida, Y., Kasuya, K., & Doi, Y. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00057-3 · Cited by 74
Cacciotti, I., Ciocci, M., Giovanni, E. D., Nanni, F. M. C., & Melino, S. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19082368 · Cited by 74
Urbina, L., Eceiza, A., Gabilondo, N., Corcuera, M. Á., & Retegi, A. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100356 · Cited by 71
Cerrone, F., Davis, R., Kenny, S. T., Woods, T., O’Donovan, A., Gupta, V. K., Tuohy, M. G., Babu, R. P., O’Kiely, P., & O’Connor, K. E. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.128 · Cited by 70
Self-citationOptical lens-microneedle array for percutaneous light delivery
Kim, M., An, J., Kim, K. S., Choi, M., Humar, M., Kwok, S. J. J., Dai, T., & Yun, S. H. (2016) · Biomedical Optics Express · doi:10.1364/boe.7.004220 · Cited by 70
Pramual, S., Assavanig, A., Bergkvist, M., Batt, C. A., Sunintaboon, P., Lirdprapamongkol, K., Svasti, J., & Niamsiri, N. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5655-4 · Cited by 69
A Novel MPEG-PDLLA-PLL Copolymer for Docetaxel Delivery in Breast Cancer Therapy
Tan, L., Peng, J., Zhao, Q., Zhang, L., Tang, X., Chen, L., Lei, M., & Qian, Z. (2017) · Theranostics · doi:10.7150/thno.19680 · Cited by 69
Crystallization of poly(lactic acid) accelerated by cyclodextrin complex as nucleating agent
Zhang, R., Wang, Y., Wang, K., Zheng, G., Li, Q., & Shen, C. (2012) · Polymer Bulletin · doi:10.1007/s00289-012-0814-y · Cited by 68
Tian, J., Min, Y., Rodgers, Z. L., Au, K. M., Hagan, C. T., Zhang, M., Roche, K. C., Yang, F., Wagner, K., & Wang, A. Z. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01370a · Cited by 68
Binary polyhydroxyalkanoate systems for soft tissue engineering
Lukasiewicz, B., Basnett, P., Nigmatullin, R., Matharu, R. K., Knowles, J. C., & Roy, I. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.027 · Cited by 68
Mitigation of hypertrophic scar contraction via an elastomeric biodegradable scaffold
Lorden, E. R., Miller, K. J., Bashirov, L., Ibrahim, M. M., Hammett, E., Jung, Y., Medina, M. A., Rastegarpour, A., Selim, M. A., Leong, K. W., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.003 · Cited by 67
Gopi, S., Kontopoulou, M., Ramsay, B. A., & Ramsay, J. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.016 · Cited by 66
Radivojević, J., Bogojević, S. Š., Šenerović, L., Vasiljević, B., Guzik, M. W., Kenny, S. T., Maslak, V., Nikodinović‐Runić, J., & O’Connor, K. E. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6984-4 · Cited by 65
Self-citationTherapeutic efficacy and toxicity of tamoxifen loaded PLA nanoparticles for breast cancer
Pandey, S. K., Ghosh, S., Maiti, P., & Haldar, C. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.08.012 · Cited by 64
Rigouin, C., Lajus, S., Ocando, C., Borsenberger, V., Nicaud, J., Marty, A., Avérous, L., & Bordes, F. (2019) · Microbial Cell Factories · doi:10.1186/s12934-019-1140-y · Cited by 64
Kurusu, R. S., Siliki, C. A., David, É., Demarquette, N. R., Gauthier, C., & Chenal, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.040 · Cited by 63
Notta‐Cuvier, D., Murariu, M., Odent, J., Delille, R., Bouzouita, A., Raquez, J., Lauro, F., & Dúbois, P. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500032 · Cited by 62
Kum, C. H., Cho, Y., Joung, Y. K., Choi, J., Park, K., Seo, S. H., Park, Y. S., Ahn, D. J., & Han, D. K. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb00490b · Cited by 61
Thulasidasan, A. K. T., Retnakumari, A. P., Shankar, M., Vijayakurup, V., Shabna, A., Thankachan, S., Pillai, K. S., Pillai, J. J., Nandan, C. D., Alex, V. V., et al. (2017) · Oncotarget · doi:10.18632/oncotarget.22376 · Cited by 59
Constantinides, C., Basnett, P., Lukasiewicz, B., Carnicer, R., Swider, E., Majid, Q. A., Srinivas, M., Carr, C. A., & Roy, I. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06096 · Cited by 57
PBAT/TPS‐nanowhiskers blends preparation and application as food packaging
da Silva, J. B. A., Santana, J. S., Lucas, A. D. A., Passador, F. R., Costa, L. A. D. S., Pereira, F. V., & Druzian, J. I. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47699 · Cited by 57
Gredes, T., Gedrange, T., Hinüber, C., Gelinsky, M., & Kunert‐Keil, C. (2014) · Annals of Anatomy - Anatomischer Anzeiger · doi:10.1016/j.aanat.2014.04.003 · Cited by 56
Bianco, A., Bozzo, B., Gaudio, C. D., Cacciotti, I., Armentano, I., Dottori, M., D'angelo, F., Martino, S., Orlacchio, A., & Kenny, J. (2011) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911511406250 · Cited by 55
Rentsch, C., Rentsch, B., Breier, A., Hofmann, A., Manthey, S., Scharnweber, D., Biewener, A., & Zwipp, H. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32314 · Cited by 53
Functionalized Poly(γ‐Glutamic Acid) Fibrous Scaffolds for Tissue Engineering
Gentilini, C., Dong, Y., May, J. R., Goldoni, S., Clarke, D. E., Lee, B., Pashuck, E. T., & Stevens, M. M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200036 · Cited by 53
Li, Y., Xin, S., Bian, Y., Dong, Q., Han, C., Xu, K., & Dong, L. (2015) · RSC Advances · doi:10.1039/c5ra01624j · Cited by 52
Liverani, L., Piegat, A., Niemczyk, A., et al. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.06.009 · Cited by 52
Tesfaye, M., Patwa, R., Dhar, P., & Katiyar, V. (2017) · ACS Omega · doi:10.1021/acsomega.7b01005 · Cited by 52
Hybrid core–shell scaffolds for bone tissue engineering
Kareem, M. M., Hodgkinson, T., Salmerón‐Sánchez, M., Dalby, M. J., & Tanner, K. E. (2019) · Biomedical Materials · doi:10.1088/1748-605x/aafbf1 · Cited by 51
Visakh, P. M. (2014) · Royal Society of Chemistry eBooks · doi:10.1039/9781782622314-00001 · Cited by 49
Cited by
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
The world of plastic waste: A review
Nayanathara Thathsarani Pilapitiya, P. G. C., & Ratnayake, A. S. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100220 · Cited by 1,034
A review on poly lactic acid (PLA) as a biodegradable polymer
Taib, N.-A. A. B., Rahman, M. R., Huda, D., Kuok, K. K., Hamdan, S., Bakri, M. K. B., Julaihi, M. R. M. B., & Khan, A. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04160-y · Cited by 854
Moshood, T. D., Nawanir, G., Mahmud, F., Mohamad, F., Ahmad, M. H., & AbdulGhani, A. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100273 · Cited by 784
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637
Metadata
- Authors
- Narancic, T., Cerrone, F., Beagan, N., & O’Connor, K. E.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-04-15
- Volume
- 12
- Issue
- 4
- Pages
- 920
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3017297593
- Cited by
- 421
- References
- 260
- FWCI
- 10.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.