The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Open accessAbstract
Polymer 3D printing is an emerging technology with recent research translating towards increased use in industry, particularly in medical fields. Polymer printing is advantageous because it enables printing low-cost functional parts with diverse properties and capabilities. Here, we provide a review of recent research advances for polymer 3D printing by investigating research related to materials, processes, and design strategies for medical applications. Research in materials has led to the development of polymers with advantageous characteristics for mechanics and biocompatibility, with tuning of mechanical properties achieved by altering printing process parameters. Suitable polymer printing processes include extrusion, resin, and powder 3D printing, which enable directed material deposition for the design of advantageous and customized architectures. Design strategies, such as hierarchical distribution of materials, enable balancing of conflicting properties, such as mechanical and biological needs for tissue scaffolds. Further medical applications reviewed include safety equipment, dental implants, and drug delivery systems, with findings suggesting a need for improved design methods to navigate the complex decision space enabled by 3D printing. Further research across these areas will lead to continued improvement of 3D-printed design performance that is essential for advancing frontiers across engineering and medicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Kassebaum, N. J., Smith, A. G. C., Bernabé, E., Fleming, T. D., Reynolds, A. E., Vos, T., Murray, C. J. L., Marcenes, W., Collaborators, G. 2. O. H., Abyu, G. Y., et al. (2017) · Journal of Dental Research · doi:10.1177/0022034517693566 · Cited by 1,981
Precision medicine, AI, and the future of personalized health care
Johnson, K. B., Wei, W., Weeraratne, D., Frisse, M. E., Misulis, K., Rhee, K., Zhao, J., & Snowdon, J. L. (2021) · Clinical and Translational Science · doi:10.1111/cts.12884 · Cited by 1,854
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
The global map for traumatic spinal cord injury epidemiology: update 2011, global incidence rate
Lee, B. B., Cripps, R. A., Fitzharris, M., & Wing, P. C. (2014) · Spinal Cord · doi:10.1038/sc.2012.158 · Cited by 871
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Inkjet printing of conductive materials: a review
Cummins, G., & Desmulliez, M. P. Y. (2012) · Circuit World · doi:10.1108/03056121211280413 · Cited by 504
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Additive Technology: Update on Current Materials and Applications in Dentistry
Barazanchi, A., Li, K. C., Al‐Amleh, B., Lyons, K. M., & Waddell, J. N. (2016) · Journal of Prosthodontics · doi:10.1111/jopr.12510 · Cited by 383
Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education
Bernhard, J., Isotani, S., Matsugasumi, T., et al. (2015) · World Journal of Urology · doi:10.1007/s00345-015-1632-2 · Cited by 368
WANG, P., ZOU, B., DING, S., LI, L., & HUANG, C. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 365
Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 337
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Salmi, M., Paloheimo, K.-S., Tuomi, J., Wolff, J., & Mäkitie, A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2012.11.041 · Cited by 330
Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences
Zuniga, J., Katsavelis, D., Peck, J., Stollberg, J., Petrykowski, M., Carson, A., & Fernandez, C. (2015) · BMC Research Notes · doi:10.1186/s13104-015-0971-9 · Cited by 323
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Filippou, V., & Tsoumpas, C. (2018) · Medical Physics · doi:10.1002/mp.13058 · Cited by 313
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Seaman, S., Kerezoudis, P., Bydon, M., Torner, J. C., & Hitchon, P. W. (2017) · Journal of Clinical Neuroscience · doi:10.1016/j.jocn.2017.06.062 · Cited by 294
Measuring and Establishing the Accuracy and Reproducibility of 3D Printed Medical Models
George, E., Liacouras, P., Rybicki, F. J., & Mitsouras, D. (2017) · RadioGraphics · doi:10.1148/rg.2017160165 · Cited by 283
3D printing applications for transdermal drug delivery
Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 270
A 3D-printed local drug delivery patch for pancreatic cancer growth suppression
Yi, H.-G., Choi, Y.-J., Kang, K. S., Hong, J. M., Pati, R. G., Park, M. N., Shim, I. K., Lee, C. M., Kim, S. C., & Cho, D.-W. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.015 · Cited by 260
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
Schievano, S., Migliavacca, F., Coats, L., Khambadkone, S., Carminati, M., Wilson, N., Deanfield, J. E., Bonhoeffer, P., & Taylor, A. M. (2007) · Radiology · doi:10.1148/radiol.2422051994 · Cited by 232
Poly(ϵ-caprolactone) microcapsules and nanocapsules in drug delivery
Pohlmann, A. R., Fonseca, F. N., Paese, K., Detoni, C. B., Coradini, K., Beck, R. C., & Guterres, S. S. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.769956 · Cited by 229
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
Highly-stretchable 3D-architected Mechanical Metamaterials
Jiang, Y., & Wang, Q. (2016) · Scientific Reports · doi:10.1038/srep34147 · Cited by 216
Swennen, G. R. J., Pottel, L., & Haers, P. E. (2020) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2020.03.015 · Cited by 210
Gordeev, E. G., Galushko, A. S., & Ananikov, V. P. (2018) · PLOS ONE · doi:10.1371/journal.pone.0198370 · Cited by 208
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast
Lin, H., Shi, L., & Wang, D. (2016) · 3D Printing in Medicine · doi:10.1186/s41205-016-0007-7 · Cited by 192
Li, F., Macdonald, N. P., Guijt, R. M., & Breadmore, M. C. (2019) · Lab on a Chip · doi:10.1039/c8lc00826d · Cited by 187
3D Printing of Flexible Electronic Devices
Yang, H., Leow, W. R., & Chen, X. (2018) · Small Methods · doi:10.1002/smtd.201700259 · Cited by 185
Effect of build orientation on the mechanical reliability of 3D printed ABS
Keleṣ, Ö., Blevins, C. W., & Bowman, K. J. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2015-0122 · Cited by 184
Teo, E. Y., Ong, S.-Y., Khoon Chong, M. S., Zhang, Z., Lu, J., Moochhala, S., Ho, B., & Teoh, S.-H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.089 · Cited by 176
Real time observation of binder jetting printing process using high-speed X-ray imaging
Parab, N. D., Barnes, J. E., Zhao, C., Cunningham, R. W., Fezzaa, K., Rollett, A. D., & Sun, T. (2019) · Scientific Reports · doi:10.1038/s41598-019-38862-7 · Cited by 174
Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics
Butt, J., & Bhaskar, R. (2020) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp4020038 · Cited by 162
4D rods: 3D structures via programmable 1D composite rods
Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.004 · Cited by 160
Laser-based additively manufactured polymers: a review on processes and mechanical models
Brighenti, R., Cosma, M. P., Marșavina, L., Spagnoli, A., & Terzano, M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05254-6 · Cited by 159
3D Printed “Earable” Smart Devices for Real-Time Detection of Core Body Temperature
Ota, H., Chao, M., Gao, Y., Wu, E., Tai, L.-C., Chen, K., Matsuoka, Y., Iwai, K., Fahad, H. M., Gao, W., et al. (2017) · ACS Sensors · doi:10.1021/acssensors.7b00247 · Cited by 154
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 146
Direct 3D Printing of Flexible Nasal Prosthesis: Optimized Digital Workflow from Scan to Fit
Nuseir, A., Hatamleh, M. M., Alnazzawi, A. A., Alrababah, M. A., Kamel, B., & Jaradat, E. A. (2018) · Journal of Prosthodontics · doi:10.1111/jopr.13001 · Cited by 129
Singh, S., Singh, M., Prakash, C., Gupta, M. K., Mia, M., & Singh, R. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03276-8 · Cited by 128
Modeling and analysis of significant process parameters of FDM 3D printer using ANFIS
Yadav, D., Chhabra, D., Gupta, R. K., Phogat, A., & Ahlawat, A. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.11.227 · Cited by 125
Current Status and Prospects of Polymer Powder 3D Printing Technologies
Wang, Y., Xu, Z., Wu, D., & Bai, J. (2020) · Materials · doi:10.3390/ma13102406 · Cited by 124
3D imaging, 3D printing and 3D virtual planning in endodontics
Shah, P. K., & CHONG, B. S. (2018) · Clinical Oral Investigations · doi:10.1007/s00784-018-2338-9 · Cited by 122
Design and properties of biomimetic irregular scaffolds for bone tissue engineering
Chen, H., Liu, Y., Wang, C., Zhang, A., Chen, B., Han, Q., & Wang, J. (2021) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2021.104241 · Cited by 119
Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury
Yoo, H.-J., Lee, S., Kim, J., Park, C., & Lee, B. (2019) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/s12984-019-0633-6 · Cited by 117
4DMesh: 4D Printing Morphing Non-Developable Mesh Surfaces
Wang, G., Yang, H., Yan, Z., Ulu, N. G., Tao, Y., Gu, J., Kara, L. B., & Yao, L. (2018) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/3242587.3242625 · Cited by 116
Farooqi, K. M., Saeed, O., Zaidi, A. N., Sanz, J., Nielsen, J. C., Hsu, D. T., & Jorde, U. P. (2016) · JACC Heart Failure · doi:10.1016/j.jchf.2016.01.012 · Cited by 114
Integrated Design Approaches for 3D Printed Tissue Scaffolds: Review and Outlook
Egan, P. (2019) · Materials · doi:10.3390/ma12152355 · Cited by 114
Self-citationYao, Q., Wei, B., Guo, Y., Jin, C., Du, X., Yan, C., Yan, J., Hu, W., Xu, Y., Zhou, Z., et al. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5360-8 · Cited by 112
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Hollister, S. J., Flanagan, C. L., Zopf, D., Morrison, R. J., Nasser, H. B., Patel, J. J., Ebramzadeh, E., Sangiorgio, S. N., Wheeler, M. B., & Green, G. E. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1270-2 · Cited by 111
Park, S. J., Lee, J. E., Lee, H. B., Park, J., Lee, N.-K., Son, Y., & Park, S.-H. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100974 · Cited by 110
A Scientist’s Guide to Buying a 3D Printer: How to Choose the Right Printer for Your Laboratory
Tully, J. J., & Meloni, G. N. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.0c03299 · Cited by 105
Kannan, S., & Ramamoorthy, M. (2020) · Materials Research Express · doi:10.1088/2053-1591/ab6a48 · Cited by 102
Erickson, M. M., Richardson, E. S., Hernandez, N. M., Bobbert, D. W., Gall, K., & Fearis, P. J. (2020) · The Journal of Arthroplasty · doi:10.1016/j.arth.2020.04.035 · Cited by 98
Fernandes, F. A. O., de Sousa, R. J. A., Ptak, M., & Migueis, G. (2019) · Applied Sciences · doi:10.3390/app9040735 · Cited by 90
Connor, H. J. O., & Dowling, D. P. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100961 · Cited by 90
3D printing of resorbable poly(propylene fumarate) tissue engineering scaffolds
Childers, E. P., Wang, M. O., Becker, M. L., Fisher, J. P., & Dean, D. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.2 · Cited by 84
Kang, H., Hollister, S. J., Marca, F. L., Park, P., & Lin, C.-Y. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4025102 · Cited by 81
3D‐Printed Coaxial Fibers for Integrated Wearable Sensor Skin
Gao, Y., Yu, G., Shu, T., Chen, Y., Yang, W., Liu, Y., Long, J., Xiong, W. H., & Xuan, F. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900504 · Cited by 81
Past, Present, and Future of Soft‐Tissue Prosthetics: Advanced Polymers and Advanced Manufacturing
Powell, S. K., Cruz, R. L. J., Ross, M. T., & Woodruff, M. A. (2020) · Advanced Materials · doi:10.1002/adma.202001122 · Cited by 80
Revilla‐León, M., González‐Martín, O., Pérez‐López, J., Sánchez‐Rubio, J. L., & Özcan, M. (2017) · Journal of Prosthodontics · doi:10.1111/jopr.12708 · Cited by 77
Biocompatibility of Photopolymers in 3D Printing
Alifui‐Segbaya, F., Varma, S., Lieschke, G. J., & George, R. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0064 · Cited by 77
Accurate Calibration in Multi-Material 3D Bioprinting for Tissue Engineering
Sodupe-Ortega, E., Sanz-García, A., Pernía-Espinoza, A. V., & Escobedo‐Lucea, C. (2018) · Materials · doi:10.3390/ma11081402 · Cited by 73
Cengiz, I. F., Pitikakis, M., Cesario, L., Parascandolo, P., Vosilla, L., Viano, G., Oliveira, J. M., & Reis, R. L. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.05.001 · Cited by 71
Wallace, J., Wang, M. O., Thompson, P., Busso, M., Belle, V., Mammoser, N., Kim, K., Fisher, J. P., Siblani, A., Xu, Y., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015003 · Cited by 70
Liu, H., Ahlinder, A., Yassin, M. A., Finne‐Wistrand, A., & Gasser, T. C. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108488 · Cited by 70
Mendes‐Felipe, C., Patrocinio, D., Laza, J. M., Ruiz‐Rubio, L., & Vilas‐Vilela, J. L. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.10.018 · Cited by 66
Egan, P., Ferguson, S. J., & Shea, K. (2017) · Journal of Mechanical Design · doi:10.1115/1.4036396 · Cited by 61
Self-citationMiedzińska, D., Gieleta, R., & Popławski, A. (2020) · Materials · doi:10.3390/ma13245825 · Cited by 52
Miller, A. T., Safranski, D. L., Wood, C., Guldberg, R. E., & Gall, K. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.06.038 · Cited by 51
Plastics: Thermoplastics, Thermosets, and Elastomers
Peters, E. N. (2002) · Wiley eBooks · doi:10.1002/9780470172551.ch11 · Cited by 49
Yin, J., Li, M., Dai, G., Zhou, H., Ma, L., & Zheng, Y. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-0031-1 · Cited by 46
Miniaturized Diaphragm Vacuum Pump by Multi-Material Additive Manufacturing
Taylor, A., & Velásquez–García, L. F. (2017) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2017.2743020 · Cited by 42
Bagheri, A., Buj-Corral, I., Ferrer, M., Pastor, M. M., & Fernandez, F. R. (2018) · Materials · doi:10.3390/ma11122420 · Cited by 42
Chantarapanich, N., Puttawibul, P., Sitthiseripratip, K., Sucharitpwatskul, S., & Chantaweroad, S. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 40
Kunrath, M. F. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00107 · Cited by 39
Song, X., He, W., Qin, H., Yang, S., & Wen, S. (2020) · Materials · doi:10.3390/ma13020258 · Cited by 34
Sensorized tissue analogues enabled by a 3D-printed conductive organogel
Crump, M. R., Bidinger, S. L., Pavinatto, F. J., Gong, A. T., Sweet, R. M., & MacKenzie, J. D. (2021) · npj Flexible Electronics · doi:10.1038/s41528-021-00104-0 · Cited by 20
Stanković, T., & Shea, K. (2020) · Journal of Mechanical Design · doi:10.1115/1.4046916 · Cited by 15
The D3 Methodology: Bridging Science and Design for Bio-Based Product Development
Egan, P., Cagan, J., Schunn, C. D., Chiu, F., Moore, J. R., & LeDuc, P. R. (2016) · Journal of Mechanical Design · doi:10.1115/1.4033751 · Cited by 14
Self-citation3D Printing-Processed Polymers for Dental Applications
Cristache, C. M., & Totu, E. E. (2020) · Springer eBooks · doi:10.1007/978-3-030-50457-1_7 · Cited by 11
Valdevit, L., Bertoldi, K., Guest, J. K., & Spadaccini, C. M. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.18 · Cited by 9
Cited by
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Mori, R. (2023) · RSC Sustainability · doi:10.1039/d2su00014h · Cited by 335
Recent Advances in Development of Waste-Based Polymer Materials: A Review
Formela, K., Kurańska, M., & Barczewski, M. (2022) · Polymers · doi:10.3390/polym14051050 · Cited by 70
Metadata
- Authors
- Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-05-06
- Volume
- 13
- Issue
- 9
- Pages
- 1499
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3159789198
- Cited by
- 361
- References
- 124
- FWCI
- 17.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.