The DOI matches its Crossref record; 223 of the 223 references it cites were found in a registry or an index.
Poly(lactic Acid): A Versatile Biobased Polymer for the Future with Multifunctional Properties—From Monomer Synthesis, Polymerization Techniques and Molecular Weight Increase to PLA Applications
Open accessAbstract
Environmental problems, such as global warming and plastic pollution have forced researchers to investigate alternatives for conventional plastics. Poly(lactic acid) (PLA), one of the well-known eco-friendly biodegradables and biobased polyesters, has been studied extensively and is considered to be a promising substitute to petroleum-based polymers. This review gives an inclusive overview of the current research of lactic acid and lactide dimer techniques along with the production of PLA from its monomers. Melt polycondensation as well as ring opening polymerization techniques are discussed, and the effect of various catalysts and polymerization conditions is thoroughly presented. Reaction mechanisms are also reviewed. However, due to the competitive decomposition reactions, in the most cases low or medium molecular weight (MW) of PLA, not exceeding 20,000–50,000 g/mol, are prepared. For this reason, additional procedures such as solid state polycondensation (SSP) and chain extension (CE) reaching MW ranging from 80,000 up to 250,000 g/mol are extensively investigated here. Lastly, numerous practical applications of PLA in various fields of industry, technical challenges and limitations of PLA use as well as its future perspectives are also reported in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Agricultural sustainability and intensive production practices
Tilman, D., Cassman, K. G., Matson, P. A., Naylor, R., & Polasky, S. (2002) · Nature · doi:10.1038/nature01014 · Cited by 7,957
The global burden of pathogens and pests on major food crops
Savary, S., Willocquet, L., Pethybridge, S. J., Esker, P., McRoberts, N., & Nelson, A. (2019) · Nature Ecology & Evolution · doi:10.1038/s41559-018-0793-y · Cited by 4,309
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 2×
“(such as Hawaii, New York, and California) implement a firm ban on single-use products, thus significantly forcing the product request in the packaging end-use sector [116].”
BackgroundProcessing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Current progress on bio-based polymers and their future trends
Babu, R. P., O'Connor, K., & Seeram, R. (2013) · Progress in Biomaterials · doi:10.1186/2194-0517-2-8 · Cited by 1,126
A review of microplastics in table salt, drinking water, and air: direct human exposure
Zhang, Q., Xu, E. G., Li, J., Chen, Q., Ma, L., Zeng, E. Y., & Shi, H. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b04535 · Cited by 1,064
Recent advances in lactic acid production by microbial fermentation processes
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.002 · Cited by 1,022
Paquin, F., Rivnay, J., Salleo, A., Stingelin, N., & Silva-Acuña, C. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc02043c · Cited by 1,021
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Zaaba, N. F., & Jaafar, M. (2020) · Polymer Engineering & Science · doi:10.1002/pen.25511 · Cited by 683
Review of micro- and nanoplastic contamination in the food chain
Toussaint, B., Raffael, B., Angers-Loustau, A., Gilliland, D., Kestens, V., Petrillo, M., Rio-Echevarria, I. M., & Van den Eede, G. (2019) · Food Additives & Contaminants: Part A · doi:10.1080/19440049.2019.1583381 · Cited by 643
The development and challenges of poly (lactic acid) and poly (glycolic acid)
Jem, K. J., & Tan, B. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.002 · Cited by 615
Kricheldorf, H. R., Berl, M., & Scharnagl, N. (1988) · Macromolecules · doi:10.1021/ma00180a002 · Cited by 597
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2011) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2011.06.017 · Cited by 596
Applications of PLA in modern medicine
DeStefano, V., Khan, S., & Tabada, A. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.08.002 · Cited by 547
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Lactic acid production – producing microorganisms and substrates sources-state of art
Abedi, E., & Hashemi, S. M. B. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e04974 · Cited by 499
Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability
Reichert, C. L., Bugnicourt, E., Coltelli, M.-B., Cinelli, P., Lazzeri, A., Canesi, I., Braca, F., Martínez, B. M., Alonso, R., Agostinis, L., et al. (2020) · Polymers · doi:10.3390/polym12071558 · Cited by 495
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492 · cited 5×
“So, this method is employed only if the polymer of low molecular weight is required [34].”
BackgroundMethodInfluentialDubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
New advances in the biodegradation of Poly(lactic) acid
Qi, X., Ren, Y., & Wang, X. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.01.010 · Cited by 462
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Ring-Opening Polymerization—An Introductory Review
Nuyken, O., & Pask, S. (2013) · Polymers · doi:10.3390/polym5020361 · Cited by 456 · cited 2×
“,6, Scheme 5) and 1,5,7-Triazabicyclodec-5-ene (TBD) [66] as a guanidine type molecule are frequently applied to catalyze the ROP of lactide by this mechanism [64,67,68].”
BackgroundMethodSynthesis of functionalized biodegradable polyesters
Williams, C. K. (2007) · Chemical Society Reviews · doi:10.1039/b614342n · Cited by 454
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Nakajima, H., Dijkstra, P., & Loos, K. (2017) · Polymers · doi:10.3390/polym9100523 · Cited by 423
Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture
Stridsberg, K. M., Ryner, M., & Albertsson, A.-C. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_2 · Cited by 375
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Hydroxyapatite–polymer biocomposites for bone regeneration: A review of current trends
Ramesh, N., Moratti, S. C., & Dias, G. J. (2018) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33950 · Cited by 358
Polylactic acid (PLA) synthesis and modifications: a review
Cheng, Y., Deng, S., Chen, P., & Ruan, R. (2009) · Frontiers of Chemistry in China · doi:10.1007/s11458-009-0092-x · Cited by 314
Dove, A. P. (2008) · Chemical Communications · doi:10.1039/b813059k · Cited by 310
Ganesh Saratale, R., Cho, S.-K., Dattatraya Saratale, G., Kadam, A. A., Ghodake, G. S., Kumar, M., Naresh Bharagava, R., Kumar, G., Su Kim, D., Mulla, S. I., et al. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.124685 · Cited by 285
3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations
Zhang, B., Wang, L., Song, P., Pei, X., Sun, H., Wu, L., Zhou, C., Wang, K., Fan, Y., & Zhang, X. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109490 · Cited by 285
Chuma, A., Horn, H. W., Swope, W. C., Pratt, R. C., Zhang, L., Lohmeijer, B. G. G., Wade, C. G., Waymouth, R. M., Hedrick, J. L., & Rice, J. E. (2008) · Journal of the American Chemical Society · doi:10.1021/ja0764411 · Cited by 282
L (+) lactic acid fermentation and its product polymerization
Srivastava, A., Narayanan, N., & Roychoudhury, P. K. (2004) · Electronic Journal of Biotechnology · doi:10.2225/vol7-issue2-fulltext-7 · Cited by 280
Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Cosate de Andrade, M. F., Souza, P. M. S., Cavalett, O., & Morales, A. R. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0787-2 · Cited by 275
Rudnik, E., & Briassoulis, D. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.031 · Cited by 272
Recent Advances in Scaffold Design and Material for Vascularized Tissue‐Engineered Bone Regeneration
Yin, S., Zhang, W., Zhang, Z., & Jiang, X. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801433 · Cited by 262
A Perspective on PEF Synthesis, Properties, and End-Life
Loos, K., Zhang, R., Pereira, I., Agostinho, B., Hu, H., Maniar, D., Sbirrazzuoli, N., Silvestre, A. J. D., Guigo, N., & Sousa, A. F. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00585 · Cited by 254
Boyer, C., Liu, J., Wong, L., Tippett, M., Bulmus, V., & Davis, T. P. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23028 · Cited by 252
Moon, S. I., Lee, C. W., Miyamoto, M., & Kimura, Y. (2000) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000501)38:9<1673::aid-pola33>3.0.co;2-t · Cited by 237
Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review
Jin, F.-L., Hu, R.-R., & Park, S.-J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.078 · Cited by 233
Controlled Cationic Polymerization of Lactide
Bourissou, D., Martin-Vaca, B., Dumitrescu, A., Graullier, M., & Lacombe, F. (2005) · Macromolecules · doi:10.1021/ma051646k · Cited by 226
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
Polylactides—Methods of synthesis and characterization
Pretula, J., Slomkowski, S., & Penczek, S. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.002 · Cited by 200
Wang, G., Zhang, D., Wan, G., Li, B., & Zhao, G. (2019) · Polymer · doi:10.1016/j.polymer.2019.121803 · Cited by 199
Hu, Y., Daoud, W., Cheuk, K., & Lin, C. (2016) · Materials · doi:10.3390/ma9030133 · Cited by 194
Coolen, A.-L., Lacroix, C., Mercier-Gouy, P., Delaune, E., Monge, C., Exposito, J.-Y., & Verrier, B. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.019 · Cited by 191
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Yang, W., Weng, Y., Puglia, D., Qi, G., Dong, W., Kenny, J. M., & Ma, P. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.085 · Cited by 188
Martin, V., Ribeiro, I. A., Alves, M. M., Gonçalves, L., Claudio, R. A., Grenho, L., Fernandes, M. H., Gomes, P., Santos, C. F., & Bettencourt, A. F. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.056 · Cited by 181
Surface functionalization of 3D printed polymer scaffolds to augment stem cell response
Jaidev, L. R., & Chatterjee, K. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.018 · Cited by 181
Lactide Synthesis and Chirality Control for Polylactic acid Production
Van Wouwe, P., Dusselier, M., Vanleeuw, E., & Sels, B. (2016) · ChemSusChem · doi:10.1002/cssc.201501695 · Cited by 179
Min, T., Sun, X., Yuan, Z., Zhou, L., Jiao, X., Zha, J., Zhu, Z., & Wen, Y. (2021) · LWT · doi:10.1016/j.lwt.2020.110034 · Cited by 178
Avinc, O., & Khoddami, A. (2009) · Fibre Chemistry · doi:10.1007/s10692-010-9213-z · Cited by 175
Bourissou, D., Moebs-Sanchez, S., & Martín-Vaca, B. (2007) · Comptes Rendus. Chimie · doi:10.1016/j.crci.2007.05.004 · Cited by 169
Achmad, F., Yamane, K., Shi, Q., & Kokugan, T. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.04.014 · Cited by 166
Coulembier, O., Lohmeijer, B. G. G., Dove, A. P., Pratt, R. C., Mespouille, L., Culkin, D. A., Benight, S. J., Dubois, P., Waymouth, R. M., & Hedrick, J. L. (2006) · Macromolecules · doi:10.1021/ma0611366 · Cited by 159
Degradation rate affords a dynamic cue to regulate stem cells beyond varied matrix stiffness
Peng, Y., Liu, Q., He, T., Ye, K., Yao, X., & Ding, J. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.021 · Cited by 156
Meng, Q., Heuzey, M., & Carreau, P. J. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.01.030 · Cited by 155
Latent, Thermally Activated Organic Catalysts for the On‐Demand Living Polymerization of Lactide
Coulembier, O., Dove, A. P., Pratt, R. C., Sentman, A. C., Culkin, D. A., Mespouille, L., Dúbois, P., Waymouth, R. M., & Hedrick, J. L. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200500723 · Cited by 155
Overview of Poly(lactic acid) (PLA) fibre
Avinç, O., & Khoddamı, A. (2010) · Fibre Chemistry · doi:10.1007/s10692-010-9226-7 · Cited by 152
Teixeira, B. N., Aprile, P., Mendonça, R. H., Kelly, D. J., & Thiré, R. M. D. S. M. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34093 · Cited by 152
Rudnik, E., & Briassoulis, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0243-7 · Cited by 149
Highly Porous Microcarriers for Minimally Invasive In Situ Skeletal Muscle Cell Delivery
Kankala, R. K., Zhao, J., Liu, C., Song, X., Yang, D., Zhu, K., Wang, S., Zhang, Y. S., & Chen, A. (2019) · Small · doi:10.1002/smll.201901397 · Cited by 149
Ye, K., Liu, D., Kuang, H., Cai, J., Chen, W., Sun, B., Xia, L., Fang, B., Morsi, Y., & Mo, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.09.071 · Cited by 148
Antimicrobial PLA films from environment friendly additives
Turalija, M., Bischof, S., Budimir, A., & Gaan, S. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.07.017 · Cited by 147
Zhang, S., Ye, J., Sun, Y., Kang, J., Liu, J., Wang, Y., Li, Y., Zhang, L., & Ning, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124523 · Cited by 147
Characterization of polylactic acid/halloysite nanotubes bionanocomposite films for food packaging
Risyon, N. P., Othman, S. H., Basha, R. K., & Talib, R. A. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100450 · Cited by 144
Chen, Y., Wang, X., Zhang, Q., Zhu, J., Li, Y., Xie, C., Li, X., Wu, J., Geng, S., Zhong, C., et al. (2017) · Nutrients · doi:10.3390/nu9060572 · Cited by 139
Liu, Q., Zheng, S., Ye, K., He, J., Shen, Y., Cui, S., Huang, J., Gu, Y., & Ding, J. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120327 · Cited by 139
Polylactic acid as a biodegradable material for all-solution-processed organic electronic devices
Mattana, G., Briand, D., Marette, A., Quintero, A. V., & de Rooij, N. F. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.11.010 · Cited by 137
Hayes, D. G., Wadsworth, L. C., Sintim, H. Y., Flury, M., English, M., Schaeffer, S., & Saxton, A. M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.07.027 · Cited by 136
Biodegradable core-shell electrospun nanofibers based on PLA and γ-PGA for wound healing
Fang, Y., Zhu, X., Wang, N., Zhang, X., Yang, D., Nie, J., & Ma, G. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.050 · Cited by 135
Satti, S. M., Shah, A. A., Marsh, T. L., & Auras, R. A. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1264-x · Cited by 134
Recent Advances in Targeted Tumor Chemotherapy Based on Smart Nanomedicines
Qin, S., Zhang, A., & Zhang, X. (2018) · Small · doi:10.1002/smll.201802417 · Cited by 133
Biobased Building Blocks and Polymers—Global Capacities, Production and Trends, 2018–2023
Chinthapalli, R., Skoczinski, P., Carus, M., Baltus, W., de Guzman, D., Käb, H., Raschka, A., & Ravenstijn, J. (2019) · Industrial Biotechnology · doi:10.1089/ind.2019.29179.rch · Cited by 132
Mao, D., Li, Q., Bai, N., Dong, H., & Li, D. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.031 · Cited by 132
Poly(lactic acid) fibers, yarns and fabrics: Manufacturing, properties and applications
Yang, Y., Zhang, M., Ju, Z., Tam, P. Y., Hua, T., Younas, M. W., Kamrul, H. M., & Hu, H. (2020) · Textile Research Journal · doi:10.1177/0040517520984101 · Cited by 130
Gomaa, S., Madkour, T. M., Moghannem, S. A. M., & El-sherbiny, I. M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.145 · Cited by 126
Fukushima, K., & Kimura, Y. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22712 · Cited by 120 · cited 9×
“[94], a 1:1 powder blend of PLLA and PDLA prepolymers having medium molecular weights was used.”
BackgroundMethodInfluentialFukushima, K., Furuhashi, Y., Sogo, K., Miura, S., & Kimura, Y. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400121 · Cited by 117
Zhang, R., Lan, W., Ji, T., Sameen, D. E., Ahmed, S., Qin, W., & Liu, Y. (2020) · LWT · doi:10.1016/j.lwt.2020.110072 · Cited by 116
Quiles‐Carrillo, L., Duart, S., Muñoz, N. M., Torres‐Giner, S., & Balart, R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.031 · Cited by 113
Polylactide nanofibers delivering doxycycline for chronic wound treatment
Cui, S., Sun, X., Li, K., Gou, D., Zhou, Y., Hu, J., & Liu, Y. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109745 · Cited by 113
A new approach for flexible PBAT/PLA/CaCO3 films into agriculture
Rocha, D. B., de Carvalho, J. S., de Oliveira, S. A., & Rosa, D. D. S. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46660 · Cited by 111
Srisa, A., & Harnkarnsujarit, N. (2020) · Food Chemistry · doi:10.1016/j.foodchem.2020.127537 · Cited by 106
Chen, G., Kim, H., Kim, E. S., & Yoon, J. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.07.022 · Cited by 105
Abasian, P., Radmansouri, M., Jouybari, M. H., Ghasemi, M. V., Mohammadi, A., Irani, M., & Sharifianjazi, F. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.215 · Cited by 105
Khankrua, R., Pivsa‐Art, S., Hamada, H., & Suttiruengwong, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.04.019 · Cited by 103
Mao, D., Li, Q., Li, D., Chen, Y., Chen, X., & Xu, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.016 · Cited by 101
Zhao, Y., Zhu, B., Wang, Y., Liu, C., & Shen, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110041 · Cited by 98
Nagahata, R., Sano, D., Suzuki, H., & Takeuchi, K. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200600715 · Cited by 96
Zou, L., Zhang, Y., Liu, X., Chen, J., & Zhang, Q. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.03.004 · Cited by 96
Nduko, J. M., & Taguchi, S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.618077 · Cited by 94
Luo, F., Fortenberry, A. W., Ren, J., & Qiang, Z. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00688 · Cited by 92
Saha, T. K., Ramkumar, V., & Chakraborty, D. (2011) · Inorganic Chemistry · doi:10.1021/ic1025262 · Cited by 86
Self-fitting shape memory polymer foam inducing bone regeneration: A rabbit femoral defect study
Xie, R., Hu, J., Hoffmann, O., Zhang, Y., Ng, M. C. F., Qin, T., & Guo, X. (2018) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2018.01.013 · Cited by 86
Biodegradable PLA/PBAT mulch on microbial community structure in different soils
Zhang, M., Jia, H., Weng, Y., & Li, C. (2019) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2019.104817 · Cited by 86
Sharma, S., Majumdar, A., & Butola, B. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.108 · Cited by 86
Layer-by-layer nanocoating of antibacterial niosome on orthopedic implant
Dwivedi, A., Mazumder, A., & Nasongkla, N. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.05.075 · Cited by 85
da Silva, T. N., Gonçalves, R. P., Rocha, C. L., Archanjo, B. S., Barboza, C. A. G., Pierre, M. B. R., Reynaud, F., & Picciani, P. H. S. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.020 · Cited by 80
Bioprinting: 3D Bioprinting: from Benches to Translational Applications (Small 23/2019)
Heinrich, M. A., Liu, W., Jimenez, A., et al. (2019) · Small · doi:10.1002/smll.201970126 · Cited by 80
Sanusi, O. M., Benelfellah, A., Bikiaris, D. Ν., & Hocine, N. A. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5104 · Cited by 77
Self-citationKabirian, F., Ditkowski, B., Zamanian, A., Heying, R., & Mozafari, M. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.04.167 · Cited by 76
Nanaki, S. G., Barmpalexis, P., Iatrou, A., Christodoulou, E., Kostoglou, M., & Bikiaris, D. Ν. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10030130 · Cited by 72
Self-citationLi, X., Zhang, W., Lin, W., Qiu, H., Qi, Y., Ma, X., Qi, H., He, Y., Zhang, H., Qian, J., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00971 · Cited by 71
Polylactones 26. Lithium alkoxide‐initiated polymerizations of L ‐lactide
Kricheldorf, H. R., & Boettcher, C. (1993) · Die Makromolekulare Chemie · doi:10.1002/macp.1993.021940614 · Cited by 70
Karavelidis, V., Giliopoulos, D. J., Karavas, E., & Bikiaris, D. Ν. (2010) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.09.004 · Cited by 70
Self-citationKowalski, A., Libiszowski, J., Majerska, K., Duda, A., & Penczek, S. (2007) · Polymer · doi:10.1016/j.polymer.2007.05.007 · Cited by 67
Cationic polymerization of L , L ‐lactide
Baśko, M., & Kubisa, P. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24048 · Cited by 66
Vorawongsagul, S., Pratumpong, P., & Pechyen, C. (2020) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2020.100608 · Cited by 66
Rizal, S., Olaiya, F. G., Saharudin, N. I., Abdullah, C. K., Olaiya, N. G., Kassim, M. H. M., Yahya, E. B., Sabaruddin, F. A., Ikramullah, I., & Khalil, H. P. S. A. (2021) · Polymers · doi:10.3390/polym13030325 · Cited by 66
Hung, C.-Y., Wang, C., & Chen, C. (2013) · Polymer · doi:10.1016/j.polymer.2013.01.045 · Cited by 64
Zhao, H., Nathaniel, G. A., & Merenini, P. C. (2017) · RSC Advances · doi:10.1039/c7ra09038b · Cited by 64
Thermal insulation using biodegradable poly(lactic acid)/date pit composites
Barkhad, M. S., Abu‐Jdayil, B., Iqbal, M. Z., & Mourad, A. I. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120533 · Cited by 64
Díaz-Gómez, L. A., García‐González, C. A., Wang, J., Yang, F., Aznar‐Cervantes, S. D., Cenís, J. L., Reyes, R., Delgado, A., Évora, C., Concheiro, Á., et al. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.038 · Cited by 63
Crystallization Study and Comparative in Vitro–in Vivo Hydrolysis of PLA Reinforcement Ligament
Beslikas, T., Gigis, I., Goulios, V., Christoforides, J. E., Papageorgiou, G. Z., & Bikiaris, D. Ν. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12106597 · Cited by 62
Self-citationBattegazzore, D., Abt, T., Maspoch, M. L., & Frache, A. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.057 · Cited by 61
Yahyaee, N., Javadi, A., Garmabi, H., & Khaki, A. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900423 · Cited by 61
Zhang, W., Chen, B., Zhao, H., Yu, P., Fu, D., Wen, J., & Peng, X. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39523 · Cited by 60
Pavia, F. C., Conoscenti, G., Greco, S., Carrubba, V. L., Ghersi, G., & Brucato, V. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.007 · Cited by 60
Delgado‐Aguilar, M., Puig, R., Sazdovski, I., & Fullana–i–Palmer, P. (2020) · Materials · doi:10.3390/ma13112655 · Cited by 59
Galactosamine-modified PEG-PLA/TPGS micelles for the oral delivery of curcumin
Sun, S., Du, X., Fu, M., Khan, A. R., Ji, J., Liu, W., & Zhai, G. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120227 · Cited by 59
Use of bio-based polymers in agricultural exclusion nets: A perspective
Mukherjee, A., Knoch, S., Chouinard, G., Tavares, J. R., & Dumont, M. (2019) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2019.01.017 · Cited by 58
Rogina, A., Antunović, M., & Milovac, D. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34111 · Cited by 57
Rahmayetty, Whulanza, Y., Sukirno, S., Rahman, S. F., Suyono, E. A., Yohda, M., & Gozan, M. (2018) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2018.09.015 · Cited by 57
Enzymatic Ring‐Opening Polymerization of Lactones: Traditional Approaches and Alternative Strategies
Engel, J., Cordellier, A., Huang, L., & Kara, S. (2019) · ChemCatChem · doi:10.1002/cctc.201900976 · Cited by 57
Zhou, M., Zhou, P., Xiong, P., Qian, X., & Zheng, H. (2015) · Macromolecular Research · doi:10.1007/s13233-015-3018-0 · Cited by 55
Romanova, O. A., Tenchurin, T. K., Demina, T. S., Sytina, E. V., Shepelev, A. D., Rudyak, S. G., Klein, O. I., Krasheninnikov, S. V., Safronova, E. I., Kamyshinsky, R. A., et al. (2019) · Cell Proliferation · doi:10.1111/cpr.12598 · Cited by 54
Activated monomer mechanism in the cationic polymerization of cyclic ethers
Kubisa, P. (1988) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19880130116 · Cited by 53
Varga, N., Hornok, V., Janovák, L., Dékány, I., & Csapó, E. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.01.012 · Cited by 53
PLA/metal oxide biocomposites for antimicrobial packaging application
Ghozali, M., Fahmiati, S., Triwulandari, E., Restu, W. K., Farhan, D., Wulansari, M., & Fatrıasarı, W. (2020) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2020.1738475 · Cited by 53
Välimäki, M. K., Sokka, L. I., Peltola, H. B., Ihme, S. S., Rokkonen, T. M. J., Kurkela, T. J., Ollila, J. T., Korhonen, A. T., & Hast, J. T. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06029-8 · Cited by 52
Hybrid core–shell scaffolds for bone tissue engineering
Kareem, M. M., Hodgkinson, T., Salmerón‐Sánchez, M., Dalby, M. J., & Tanner, K. E. (2019) · Biomedical Materials · doi:10.1088/1748-605x/aafbf1 · Cited by 51
Yu, Y., Xu, P., Jia, S., Pan, H., Zhang, H., Wang, D., & Dong, L. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.044 · Cited by 51
Lactide synthesis optimization: investigation of the temperature, catalyst and pressure effects
Ehsani, M., Khodabakhshi, K., & Asgari, M. S. (2014) · e-Polymers · doi:10.1515/epoly-2014-0055 · Cited by 50
PLA/PCL-based foams as scaffolds for tissue engineering applications
Sartore, L., Inverardi, N., Pandini, S., Bignotti, F., & Chiellini, E. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.11.103 · Cited by 49
Feasibility study of epoxy coated Poly Lactic Acid as a sustainable replacement for river sand
Patil, A. Y., Banapurmath, N. R., & Shivangi, U. S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121750 · Cited by 49
Luo, Y., Humayun, A., & Mills, D. K. (2020) · Applied Sciences · doi:10.3390/app10113971 · Cited by 49
Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications
Aragón-Gutiérrez, A., Arrieta, M. P., López‐González, M., Fernández‐García, M., & López, D. (2020) · Materials · doi:10.3390/ma13214910 · Cited by 49
Foaming of Polylactide in the Presence of Chain Extender
Ludwiczak, J. M., & Kozłowski, M. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0658-7 · Cited by 48
Biosilicate ® scaffolds produced by 3D‐printing and direct foaming using preceramic polymers
Elsayed, H., Rebesan, P., Crovace, M. C., Zanotto, E. D., Colombo, P. A., & Bernardo, E. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15948 · Cited by 48
Bioresorbable antibacterial PCL‐PLA‐nHA composite membranes for oral and maxillofacial defects
Sharif, F., Tabassum, S., Mustafa, W. A. A., Asif, A., Zarif, F., Tariq, M. S., Siddiqui, S. A., Gilani, M. A., Rehman, I. U., & MacNeil, S. (2018) · Polymer Composites · doi:10.1002/pc.24899 · Cited by 46
Extrusion blown films of poly(lactic acid) chain‐extended with food grade multifunctional epoxies
Karkhanis, S. S., & Matuana, L. M. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25224 · Cited by 46
Omay, D., & Güvenilir, Y. (2013) · Biocatalysis and Biotransformation · doi:10.3109/10242422.2013.795148 · Cited by 45
Jaszkiewicz, A., Bledzki, A. K., van der Meer, R., Franciszczak, P., & Meljon, A. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1148-8 · Cited by 45
Poly (Lactic Acid) Films in Food Packaging Systems
Süfer, Ö. (2017) · Food Science & Nutrition Technology · doi:10.23880/fsnt-16000131 · Cited by 45
Solid state polymerization of poly(lactic acid): Some fundamental parameters
Vouyiouka, S., Theodoulou, P., Symeonidou, A., Papaspyrides, C. D., & Pfaendner, R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.012 · Cited by 44
Werchefani, M., Lacoste, C., Belguith, H., Gargouri, A. F., & Bradaï, C. (2020) · Journal of Composite Materials · doi:10.1177/0021998320941579 · Cited by 44
Nanaki, S. G., Tseklima, M., Terzopoulou, Z. N., Nerantzaki, M., Giliopoulos, D. J., Triantafyllidis, K. S., Kostoglou, M., & Bikiaris, D. Ν. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.03.016 · Cited by 43
Self-citationFredi, G., Rigotti, D., Bikiaris, D. Ν., & Dorigato, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123527 · Cited by 43
Self-citationSingh, S. K., Anthony, P., & Chowdhury, A. (2018) · Oriental Journal Of Chemistry · doi:10.13005/ojc/3404036 · Cited by 41
Surface modification of PLA nets intended for agricultural applications
Knoch, S., Pelletier, F., Larose, M., Chouinard, G., Dumont, M., & Tavares, J. R. (2020) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2020.124787 · Cited by 41
PLGA/SBA-15 mesoporous silica composite microparticles loaded with paclitaxel for local chemotherapy
Nanaki, S. G., Siafaka, P. I., Zachariadou, D., Nerantzaki, M., Giliopoulos, D. J., Triantafyllidis, K. S., Kostoglou, M., Nikolakaki, E., & Bikiaris, D. Ν. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.12.010 · Cited by 40
Self-citationDesign of a Novel Process for Continuous Lactide Synthesis from Lactic Acid
Park, J., Cho, H., Hwang, D., Kim, S., Moon, I., & Kim, M. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02419 · Cited by 40
Combination of Mechanochemical Degradation of Polymers with Controlled Free-Radical Polymerization
Schmidt‐Naake, G., Drache, M., & Weber, M. (2002) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(200211)203:15<2245::aid-macp2245>3.0.co;2-3 · Cited by 39
Catalytic Systems for the Production of Poly(lactic acid)
Byers, J. A., Biernesser, A. B., Chiaie, K. R. D., Kaur, A., & Kehl, J. A. (2017) · Advances in polymer science · doi:10.1007/12_2017_20 · Cited by 39
Luoma, E., Välimäki, M. K., Rokkonen, T. M. J., Sääskilahti, H., Ollila, J. T., Rekilä, J., & Immonen, K. (2021) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087920988569 · Cited by 39
L-lactic acid production from Lactobacillus casei by solid state fermentation using rice straw
Qi, B., & Yao, R. (2007) · BioResources · doi:10.15376/biores.2.3.419-429 · Cited by 38
Dual-targeted biodegradable micelles for anticancer drug delivery
Jelonek, K., Zajdel, A., Wilczok, A., Latocha, M. T., Musiał‐Kulik, M., Foryś, A., & Kasperczyk, J. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.01.081 · Cited by 38
Lü, R., Sameen, D. E., Qin, W., Wu, D., Dai, J., Li, S., & Liu, Y. (2020) · Coatings · doi:10.3390/coatings10030280 · Cited by 35
An Overview of the Synthesis and Synthetic Mechanism of Poly (Lactic acid)
Hong, C. L. S. (2014) · Modern Chemistry & Applications · doi:10.4172/2329-6798.1000144 · Cited by 34
Dixit, S., Sahu, R., Verma, R., Duncan, S. A., Giambartolomei, G. H., Singh, S. R., & Dennis, V. A. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.12.019 · Cited by 34
Mandal, M., Ramkumar, V., & Chakraborty, D. (2019) · Polymer Chemistry · doi:10.1039/c8py01750f · Cited by 33
Liu, Z., Ge, Y., Zhang, L., Wang, Y., Guo, C., Feng, K., Yang, S., Zhai, Z., Chi, Y., Zhao, J., et al. (2020) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.3106 · Cited by 33
Psochia, E. A., Papadopoulos, L., Gkiliopoulos, D., Francone, A., Grigora, M., Tzetzis, D., de Castro, J. V., Neves, N. M., Triantafyllidis, K. S., Torres, C. M. S., et al. (2021) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol1010005 · Cited by 33
Self-citationRing opening polymerization of lactide: kinetics and modeling
Metkar, S., Sathe, V. S., Rahman, I., Idage, B. B., & Idage, S. B. (2019) · Chemical Engineering Communications · doi:10.1080/00986445.2018.1550395 · Cited by 32
Li, Y., Zhou, H., Wen, B., Chen, Y., & Wang, X. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01572-2 · Cited by 32
Sun, S., Li, Q., Zhao, N. R., Jiang, J., Zhang, K., Hou, J., Wang, X., & Liu, G. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4427 · Cited by 31
Free-standing microchamber arrays as a biodegradable drug depot system for implant coatings
Zykova, Y., Kudryavtseva, V., Gai, M., Kozelskaya, A. I., Frueh, J., Sukhorukov, G. B., & Tverdokhlebov, S. I. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.029 · Cited by 31
Cui, L., Lan, Y., Wang, Y., Zhang, Y., Polyák, P., Sui, X., & Pukánszky, B. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109774 · Cited by 31
Present Situation and Future Perspectives of Poly(lactic acid)
Masutani, K., & Kimura, Y. (2017) · Advances in polymer science · doi:10.1007/12_2016_16 · Cited by 30
Li, W., Fan, X., Wang, X., Shang, X., Wang, Q., Lin, J., Hu, Z., & Li, Z. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.006 · Cited by 30
Christodoulou, E., Nerantzaki, M., Nanaki, S. G., Barmpalexis, P., Giannousi, K., Dendrinou-Samara, C., Angelakeris, M., Gounari, E., Anastasiou, A. D., & Bikiaris, D. Ν. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11050213 · Cited by 30
Self-citationBeltrán, F. R., Climent‐Pascual, E., de la Orden, M. U., & Urreaga, J. M. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.109045 · Cited by 30
Yan, T., Ma, Z., Liu, J., Yin, N., Lei, S., Zhang, X., Li, X., Zhang, Y. X., & Kong, J. (2021) · Scientific Reports · doi:10.1038/s41598-020-80476-x · Cited by 30
Höhnemann, T., Steinmann, M., Schindler, S., Hoss, M., König, S., Ota, A., Dauner, M., & Buchmeiser, M. R. (2021) · Materials · doi:10.3390/ma14041044 · Cited by 28
Novotná, L., Kučera, L., Hampl, A., Drdlík, D., Cihlář, J., & Cihlář, J. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.03.022 · Cited by 27
Hassan, N. A. A., Ahmad, S., Chen, S., & Shahdan, D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117884 · Cited by 27
Nanaki, S. G., Viziridou, A., Zamboulis, A., Kostoglou, M., Papageorgiou, G. Z., & Bikiaris, D. Ν. (2020) · Polymers · doi:10.3390/polym12040852 · Cited by 27
Self-citationThe Effect of Crystallization on the Solid State Polycondensation of Poly( L ‐lactic Acid)
Xu, H. Y., Luo, M., Yu, M., Teng, C., & Xie, S. (2006) · Journal of Macromolecular Science Part B · doi:10.1080/00222340600770400 · Cited by 26
Nerantzaki, M., Kehagias, N., Francone, A., Fernández, A., Torres, C. M. S., Papi, R. M., Choli‐Papadopoulou, T., & Bikiaris, D. Ν. (2018) · ACS Omega · doi:10.1021/acsomega.7b01756 · Cited by 26
Self-citationHeparin-dopamine functionalized graphene foam for sustained release of bone morphogenetic protein-2
Yao, Q., Liu, Y., & Sun, H. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2681 · Cited by 25
Salmas, C. E., Giannakas, A. E., Baikousi, M., Leontiou, A. A., Σιάσου, Ζ., & Karakassides, M. A. (2021) · Processes · doi:10.3390/pr9010088 · Cited by 25
Toshikj, N., Robin, J.-J., & Blanquer, S. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109599 · Cited by 24 · cited 4×
“,6, Scheme 5) and 1,5,7-Triazabicyclodec-5-ene (TBD) [65] as a guanidine type molecule are frequently applied to catalyze the ROP of lactide by this mechanism [63,66,67].”
BackgroundInfluentialPeng, B., Hou, H., Song, F., & Wu, L. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202192q · Cited by 24
Lalloz, A., Bolzinger, M., Briançon, S., Faivre, J., Rabanel, J., Ac, A. G., Hildgen, P., & Banquy, X. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.02.039 · Cited by 23
Zamproni, L. N., Grinet, M. A. V. M., Mundim, M. V., Reis, M. B. C., Galindo, L. T., Marciano, F. R., Lobo, A. O., & Porcionatto, M. A. (2018) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2018.08.014 · Cited by 23
Crystallization and enzymatic hydrolysis of PLA grade for orthopedics
Papageorgiou, G. Z., Beslikas, T., Gigis, J., Christoforides, J. E., & Bikiaris, D. Ν. (2010) · Advances in Polymer Technology · doi:10.1002/adv.20194 · Cited by 22
Self-citationRamírez‐Herrera, C. A., Flores‐Vela, A., Torres-Huerta, A. M., Domínguez-Crespo, M. A., & Palma‐Ramírez, D. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2380-7 · Cited by 22
Hao, Y., Li, Y., Liu, Z., Yan, X., Tong, Y., & Zhang, H. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-8579-7 · Cited by 22
Pappa, A., Papadimitriou‐Tsantarliotou, A., Kaloyianni, M. G., Kastrinaki, G., Dailianis, S., Lambropoulou, D. A., Christodoulou, E., Kyzas, G. Z., & Bikiaris, D. Ν. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125335 · Cited by 21
Self-citationSynthesis and synthetic mechanism of Polylactic acid
Montané, X., Montornés, J. M., Nogalska, A., Olkiewicz, M., Giamberini, M., Garcia‐Valls, R., Badia-Fabregat, M., Jubany, I., & Tylkowski, B. (2020) · Physical Sciences Reviews · doi:10.1515/psr-2019-0102 · Cited by 20
SCREENING OF BACTERIA FOR LACTIC ACID PRODUCTION FROM WHEY WATER
Shiphrah, V. H. (2013) · American journal of biochemistry & biotechnology/American journal of biochemistry and biotechnology · doi:10.3844/ajbbsp.2013.118.123 · Cited by 19
Cited by
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
Organic acids production from lactic acid bacteria: A preservation approach
Punia Bangar, S., Suri, S., Trif, M., & Ozogul, F. (2022) · Food Bioscience · doi:10.1016/j.fbio.2022.101615 · Cited by 336
3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Self-citationWang, M., Li, Q., Shi, C., Lv, J., Xu, Y., Yang, J., Chua, S. L., Jia, L., Chen, H., Liu, Q., et al. (2023) · Nature Nanotechnology · doi:10.1038/s41565-023-01329-y · Cited by 263
Metadata
- Authors
- Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-05-31
- Volume
- 13
- Issue
- 11
- Pages
- 1822
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3165127864
- Cited by
- 655
- References
- 223
- FWCI
- 21.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.