The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
Recent Progress in the Design of Advanced Cathode Materials and Battery Models for High‐Performance Lithium‐X (X = O2, S, Se, Te, I2, Br2) Batteries
Abstract
Recent advances and achievements in emerging Li‐X (X = O 2, S, Se, Te, I 2, Br 2) batteries with promising cathode materials open up new opportunities for the development of high‐performance lithium‐ion battery alternatives. In this review, we focus on an overview of recent important progress in the design of advanced cathode materials and battery models for developing high‐performance Li‐X (X = O 2, S, Se, Te, I 2, Br 2) batteries. We start with a brief introduction to explain why Li‐X batteries are important for future renewable energy devices. Then, we summarize the existing drawbacks, major progress and emerging challenges in the development of cathode materials for Li‐O 2 (S) batteries. In terms of the emerging Li‐X (Se, Te, I 2, Br 2) batteries, we systematically summarize their advantages/disadvantages and recent progress. Specifically, we review the electrochemical performance of Li‐Se (Te) batteries using carbonate‐/ether‐based electrolytes, made with different electrode fabrication techniques, and of Li‐I 2 (Br 2) batteries with various cell designs (e.g., dual electrolyte, all‐organic electrolyte, with/without cathode‐flow mode, and fuel cell/solar cell integration). Finally, the perspective on and challenges for the development of cathode materials for the promising Li‐X (X = O 2, S, Se, Te, I 2, Br 2) batteries is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery
Abraham, K. M., & Jiang, Z. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836378 · Cited by 2,092
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Recent Progress in Redox Flow Battery Research and Development
Wang, W., Luo, Q., Li, B., Wei, X., Li, L., & Yang, Z. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200694 · Cited by 1,509
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Oxygen electrocatalysts in metal–air batteries: from aqueous to nonaqueous electrolytes
Wang, Z.-L., Xu, D., Xu, J.-J., & Zhang, X.-B. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60248f · Cited by 1,447
Self-citationRechargeable Lithium Batteries with Aqueous Electrolytes
Li, W., Dahn, J. R., & Wainwright, D. S. (1994) · Science · doi:10.1126/science.264.5162.1115 · Cited by 1,322
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Rechargeable Li2O2 Electrode for Lithium Batteries
Ogasawara, T., Débart, A., Holzapfel, M., Novák, P., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056811q · Cited by 1,132
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Aprotic and Aqueous Li–O2 Batteries
Lu, J., Li, L., Park, J.-B., Sun, Y.-K., Wu, F., & Amine, K. (2014) · Chemical Reviews · doi:10.1021/cr400573b · Cited by 1,102
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Lithium–oxygen batteries: bridging mechanistic understanding and battery performance
Lu, Y.-C., Gallant, B. M., Kwabi, D. G., Harding, J. R., Mitchell, R. R., Whittingham, M. S., & Shao-Horn, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee23966g · Cited by 927
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Abouimrane, A., Dambournet, D., Chapman, K. W., Chupas, P. J., Weng, W., & Amine, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211766q · Cited by 628
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Grande, L., Paillard, E., Hassoun, J., Park, J., Lee, Y., Sun, Y., Passerini, S., & Scrosati, B. (2015) · Advanced Materials · doi:10.1002/adma.201403064 · Cited by 618
Li, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Non‐Aqueous and Hybrid Li‐O2 Batteries
Black, R., Adams, B., & Nazar, L. F. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200001 · Cited by 493
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
A review of cathode materials and structures for rechargeable lithium–air batteries
Ma, Z., Yuan, X., Li, L., Ma, Z.-F., Wilkinson, D. P., Zhang, L., & Zhang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00838g · Cited by 485
Nonaqueous redox-flow batteries: organic solvents, supporting electrolytes, and redox pairs
Gong, K., Fang, Q., Gu, S., Li, S. F. Y., & Yan, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02341f · Cited by 470
A critical review on lithium–air battery electrolytes
Balaish, M., Kraytsberg, A., & Ein-Eli, Y. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp54165g · Cited by 454
An Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
Selenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
The discharge rate capability of rechargeable Li–O2 batteries
Lu, Y.-C., Kwabi, D. G., Yao, K. P. C., Harding, J. R., Zhou, J., Zuin, L., & Shao-Horn, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01500a · Cited by 415
A reversible long-life lithium–air battery in ambient air
Zhang, T., & Zhou, H. (2013) · Nature Communications · doi:10.1038/ncomms2855 · Cited by 415
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Ruthenium-Based Electrocatalysts Supported on Reduced Graphene Oxide for Lithium-Air Batteries
Jung, H.-G., Jeong, Y. S., Park, J.-B., Sun, Y.-K., Scrosati, B., & Lee, Y. J. (2013) · ACS Nano · doi:10.1021/nn400477d · Cited by 382
Li, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Sun, B., Huang, X., Chen, S., Munroe, P., & Wang, G. (2014) · Nano Letters · doi:10.1021/nl500397y · Cited by 344
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Confined selenium within porous carbon nanospheres as cathode for advanced Li–Se batteries
Li, Z., Yuan, L., Yi, Z., Liu, Y., & Huang, Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.07.012 · Cited by 284
Zhao, Y., Wang, L., & Byon, H. R. (2013) · Nature Communications · doi:10.1038/ncomms2907 · Cited by 278
Lin, T., Tang, Y., Wang, Y., Bi, H., Liu, Z., Huang, F., Xie, X., & Jiang, M. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24324a · Cited by 270
Shin, S.-H., Yun, S.-H., & Moon, S.-H. (2013) · RSC Advances · doi:10.1039/c3ra00115f · Cited by 266
Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites
Lai, C., Gao, X. P., Zhang, B., Yan, T. Y., & Zhou, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809473e · Cited by 265
Elemental Selenium for Electrochemical Energy Storage
Yang, C.-P., Yin, Y.-X., & Guo, Y.-G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502405h · Cited by 263
Huang, J.-Q., Liu, X.-F., Zhang, Q., Chen, C.-M., Zhao, M.-Q., Zhang, S.-M., Zhu, W., Qian, W.-Z., & Wei, F. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.003 · Cited by 254
Cathode materials for next generation lithium ion batteries
Xu, J., Dou, S., Liu, H., & Dai, L. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.05.013 · Cited by 253
Self-citationRechargeable Lithium-Iodine Batteries with Iodine/Nanoporous Carbon Cathode
Zhao, Q., Lu, Y., Zhu, Z., Tao, Z., & Chen, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02116 · Cited by 246
An Aqueous Rechargeable Lithium Battery with Good Cycling Performance
Wang, G., Fu, L., Zhao, N., Yang, L., Wu, Y., & Wu, H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603699 · Cited by 243
He, J., Chen, Y., Lv, W., Wen, K., Wang, Z., Zhang, W., Li, Y., Qin, W., & He, W. (2016) · ACS Nano · doi:10.1021/acsnano.6b04622 · Cited by 226
Han, K., Liu, Z., Shen, J., Lin, Y., Dai, F., & Ye, H. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402815 · Cited by 218
Tao, X., Chen, X., Xia, Y., Huang, H., Gan, Y., Wu, R., Chen, F., & zhang, W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01213h · Cited by 212
Yoon, K. R., Lee, G. Y., Jung, J.-W., Kim, N.-H., Kim, S. O., & Kim, I.-D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00185 · Cited by 208
Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism
Li, Q., Liu, H., Yao, Z., Cheng, J., Li, T., Li, Y., Wolverton, C., Wu, J., & Dravid, V. P. (2016) · ACS Nano · doi:10.1021/acsnano.6b04519 · Cited by 191
Amylopectin Wrapped Graphene Oxide/Sulfur for Improved Cyclability of Lithium–Sulfur Battery
Zhou, W., Chen, H., Yu, Y., Wang, D., Cui, Z., DiSalvo, F. J., & Abruña, H. D. (2013) · ACS Nano · doi:10.1021/nn403237b · Cited by 190
Li–Se battery: absence of lithium polyselenides in carbonate based electrolyte
Cui, Y., Abouimrane, A., Sun, C.-J., Ren, Y., & Amine, K. (2014) · Chem. Commun. · doi:10.1039/c4cc00934g · Cited by 187
Self-weaving sulfur–carbon composite cathodes for high rate lithium–sulfur batteries
Su, Y.-S., Fu, Y., & Manthiram, A. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42796f · Cited by 184
Li, Z., & Yin, L. (2015) · Nanoscale · doi:10.1039/c5nr00903k · Cited by 178
He, J., Chen, Y., Lv, W., Wen, K., Li, P., Wang, Z., Zhang, W., Qin, W., & He, W. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00015 · Cited by 175
Lee, J. T., Kim, H., Oschatz, M., Lee, D., Wu, F., Lin, H., Zdyrko, B., Cho, W. I., Kaskel, S., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400981 · Cited by 168
Ryu, W.-H., Gittleson, F. S., Thomsen, J. M., Li, J., Schwab, M. J., Brudvig, G. W., & Taylor, A. D. (2016) · Nature Communications · doi:10.1038/ncomms12925 · Cited by 166
The Electrochemistry with Lithium versus Sodium of Selenium Confined To Slit Micropores in Carbon
Xin, S., Yu, L., You, Y., Cong, H., Yin, Y., Du, X.-L., Guo, Y., Yu, S., Cui, Y., & Goodenough, J. B. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01819 · Cited by 156
Zhao, Y., Hong, M., Bonnet‐Mercier, N., Yu, G., Choi, H. C., & Byon, H. R. (2014) · Nano Letters · doi:10.1021/nl404784d · Cited by 152
Priolisi, O., Fabrizi, A., Giovanna, D., Bonollo, F., & Cattini, S. (2015) · Journal of Nanoparticle Research · doi:10.1007/s11051-015-3308-7 · Cited by 149
Zhao, Y., Ding, Y., Song, J., Peng, L., Goodenough, J. B., & Yu, G. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00407h · Cited by 144
Rechargeable alkali-ion cathode-flow battery
Lu, Y., & Goodenough, J. B. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04222f · Cited by 137
Liu, T., Dai, C., Jia, M., Liu, D., Bao, S., Jiang, J., Xu, M., & Li, C. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04060 · Cited by 131
Nitrogen-Doped Holey Graphene for High-Performance Rechargeable Li–O2 Batteries
Shui, J., Lin, Y., Connell, J. W., Xu, J., Fan, X., & Dai, L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00128 · Cited by 129
Self-citationA selenium-confined microporous carbon cathode for ultrastable lithium–selenium batteries
Liu, Y., Si, L., Zhou, X., Liu, X., Xu, Y., Bao, J., & Dai, Z. H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03141e · Cited by 127
High‐Performance Lithium‐Iodine Flow Battery
Zhao, Y., & Byon, H. R. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300627 · Cited by 122
Kundu, D. K., Krumeich, F., & Nesper, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.050 · Cited by 103
Jiang, Y., Ma, X., Feng, J., & Xiong, S. L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06624c · Cited by 98
Ding, N., Chen, S., Geng, D., Chien, S. W., An, T., Hor, T. S. A., Liu, Z., Yu, S., & Zong, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401999 · Cited by 97
Liu, Y., Si, L., Du, Y., Zhou, X., Dai, Z. H., & Bao, J. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09553 · Cited by 92
A Li–Liquid Cathode Battery Based on a Hybrid Electrolyte
Wang, Y., Wang, Y., & Zhou, H. S. (2011) · ChemSusChem · doi:10.1002/cssc.201100201 · Cited by 82
Xu, J., Xin, S., Liu, J., Wang, J., Lei, Y., & Yu, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600640 · Cited by 81
Self-citationSu, Z., Tong, C., He, D., Lai, C., Liu, L., Wang, C., & Xi, K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00706f · Cited by 77
Bosubabu, D., & Ramesha, K. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.026 · Cited by 71
Liu, L., Hou, Y., Yang, Y., Li, M., Wang, X., & Wu, Y. (2014) · RSC Advances · doi:10.1039/c3ra48034h · Cited by 62
Zhang, J., Zhang, Z., Li, Q., Qu, Y., & Jiang, S. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0451414jes · Cited by 48
Selenium/pomelo peel-derived carbon nanocomposite as advanced cathode for lithium-selenium batteries
Sun, K., Zhao, H., Zhang, S., Yao, J., & Xu, J. (2015) · Ionics · doi:10.1007/s11581-015-1451-x · Cited by 34
Self-citationGuo, J., Wang, Q., Jin, J. H., Chen, C., & Wen, Z. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0661605jes · Cited by 28
A selenium@polypyrrole hollow sphere cathode for rechargeable lithium batteries
Guo, J., Wen, Z., Ma, G., Jin, J. H., Wang, W., & Liu, Y. (2015) · RSC Advances · doi:10.1039/c4ra14945a · Cited by 24
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Recent Development of Metallic (1T) Phase of Molybdenum Disulfide for Energy Conversion and Storage
Lei, Z., Zhan, J., Tang, L., Zhang, Y., & Wang, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703482 · Cited by 485
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Metadata
- Authors
- Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-05-10
- Volume
- 29
- Issue
- 28
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2612530329
- Cited by
- 319
- References
- 118
- FWCI
- 18.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.