The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Surface Modification of Polymers: Methods and Applications
Abstract
Low cost, controlled crystallinity, chemical, and mechanical stability enable application of polymers in energy, water, electronics, and biomedical industries. Recent studies have shown that tailoring surface properties of polymers impacts their durability and functionality in these applications. However, the functionality and performance of polymer‐based devices and systems are greatly affected by the modification method and the process parameters, highlighting the need for understanding these methods and their mechanisms of operation in detail. The selection of the modification method invariably decides the properties enhanced in the polymer. In this review, various polymer surface modification treatments are discussed. These methods are categorized into physical, chemical, thermal, and optical ways, while illustrating their advantages and disadvantages. This review also explores the surface modification of polymers by patterning which encompasses one or more surface treatment methods. An application‐oriented study is presented discussing the relative importance of a method pertaining to a specific field of end‐application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder
Dalby, M. J., Gadegaard, N., Tare, R., Andar, A., Riehle, M. O., Herzyk, P., Wilkinson, C. D. W., & Oreffo, R. O. C. (2007) · Nature Materials · doi:10.1038/nmat2013 · Cited by 2,416
Li, X.-M., Reinhoudt, D., & Crego-Calama, M. (2007) · Chemical Society Reviews · doi:10.1039/b602486f · Cited by 2,079
Fridman, A. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511546075 · Cited by 1,776
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Epitaxial self-assembly of block copolymers on lithographically defined nanopatterned substrates
Ouk Kim, S., Solak, H. H., Stoykovich, M. P., Ferrier, N. J., de Pablo, J. J., & Nealey, P. F. (2003) · Nature · doi:10.1038/nature01775 · Cited by 1,660
Atmospheric pressure plasmas: A review
Tendero, C., Tixier, C., Tristant, P., Desmaison, J., & Leprince, P. (2006) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2005.10.003 · Cited by 1,553
Photodegradation and photostabilization of polymers, especially polystyrene: review
Yousif, E., & Haddad, R. (2013) · SpringerPlus · doi:10.1186/2193-1801-2-398 · Cited by 1,503
Polymer surface modification for the attachment of bioactive compounds
Goddard, J. M., & Hotchkiss, J. H. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.04.002 · Cited by 1,379
Grafting: a versatile means to modify polymersTechniques, factors and applications
BHATTACHARYA, A. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.05.002 · Cited by 1,230
Density Multiplication and Improved Lithography by Directed Block Copolymer Assembly
Ruiz, R., Kang, H., Detcheverry, F. A., Dobisz, E., Kercher, D. S., Albrecht, T. R., de Pablo, J. J., & Nealey, P. F. (2008) · Science · doi:10.1126/science.1157626 · Cited by 1,150
Turning a surface superrepellent even to completely wetting liquids
Liu, T. “., & Kim, C.-J. “. (2014) · Science · doi:10.1126/science.1254787 · Cited by 1,149
Sub-10 nm imprint lithography and applications
Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589752 · Cited by 1,113
Multi-colour organic light-emitting displays by solution processing
Müller, C. D., Falcou, A., Reckefuss, N., Rojahn, M., Wiederhirn, V., Rudati, P., Frohne, H., Nuyken, O., Becker, H., & Meerholz, K. (2003) · Nature · doi:10.1038/nature01390 · Cited by 1,110
Gas discharge plasmas and their applications
Bogaerts, A., Neyts, E., Gijbels, R., & van der Mullen, J. (2002) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/s0584-8547(01)00406-2 · Cited by 1,109
Plasma surface modification of polymers for improved adhesion: a critical review
Liston, E. M., Martinu, L., & Wertheimer, M. R. (1993) · Journal of Adhesion Science and Technology · doi:10.1163/156856193x00600 · Cited by 1,091
Applications of Bio‐Inspired Special Wettable Surfaces
Yao, X., Song, Y., & Jiang, L. (2011) · Advanced Materials · doi:10.1002/adma.201002689 · Cited by 1,073
Recent Developments in Rayleigh-Bénard Convection
Bodenschatz, E., Pesch, W., & Ahlers, G. (2000) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.32.1.709 · Cited by 1,014
Patterning with block copolymer thin films
Segalman, R. A. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.12.003 · Cited by 954
Patterning surfaces with functional polymers
Nie, Z., & Kumacheva, E. (2008) · Nature Materials · doi:10.1038/nmat2109 · Cited by 935
Recent developments in PDMS surface modification for microfluidic devices
Zhou, J., Ellis, A. V., & Voelcker, N. H. (2010) · ELECTROPHORESIS · doi:10.1002/elps.200900475 · Cited by 857
The extracellular matrix guides the orientation of the cell division axis
Théry, M., Racine, V., Pépin, A., Piel, M., Chen, Y., Sibarita, J.-B., & Bornens, M. (2005) · Nature Cell Biology · doi:10.1038/ncb1307 · Cited by 780
Efimenko, K., Wallace, W. E., & Genzer, J. (2002) · Journal of Colloid and Interface Science · doi:10.1006/jcis.2002.8594 · Cited by 757
Superhydrophobic Fabrics Produced by Electrospinning and Chemical Vapor Deposition
Ma, M., Mao, Y., Gupta, M., Gleason, K. K., & Rutledge, G. C. (2005) · Macromolecules · doi:10.1021/ma0511189 · Cited by 741
Desmet, T., Morent, R., De Geyter, N., Leys, C., Schacht, E., & Dubruel, P. (2009) · Biomacromolecules · doi:10.1021/bm900186s · Cited by 689
Use of ozone in the food industry
Guzel-Seydim, Z. B., Greene, A. K., & Seydim, A. C. (2004) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2003.10.014 · Cited by 688
Plasma treatment of polymers for surface and adhesion improvement
Hegemann, D., Brunner, H., & Oehr, C. (2003) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(03)00644-x · Cited by 682
Surface modification of polymers for medical applications
Ikada, Y. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90025-6 · Cited by 674
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Borowiec, A., & Haugen, H. K. (2003) · Applied Physics Letters · doi:10.1063/1.1586457 · Cited by 645
NANOFIBROUS MATERIALS AND THEIR APPLICATIONS
Burger, C., Hsiao, B. S., & Chu, B. (2006) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.36.011205.123537 · Cited by 622
Low-Temperature Plasmas for Medicine?
Laroussi, M. (2009) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2009.2017267 · Cited by 619
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Bodas, D., & Khan-Malek, C. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.08.037 · Cited by 600
Surface modification and property analysis of biomedical polymers used for tissue engineering
Ma, Z., Mao, Z., & Gao, C. (2007) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2007.06.019 · Cited by 590
Block Copolymers: Past Successes and Future Challenges
Lodge, T. P. (2003) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200290073 · Cited by 567
Zhu, G., Su, Y., Bai, P., Chen, J., Jing, Q., Yang, W., & Wang, Z. L. (2014) · ACS Nano · doi:10.1021/nn5012732 · Cited by 565
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Langmuir−Blodgettry of Nanocrystals and Nanowires
Tao, A. R., Huang, J., & Yang, P. (2008) · Accounts of Chemical Research · doi:10.1021/ar8000525 · Cited by 466
Plasma Surface Modification of Biodegradable Polymers: A Review
Morent, R., De Geyter, N., Desmet, T., Dubruel, P., & Leys, C. (2011) · Plasma Processes and Polymers · doi:10.1002/ppap.201000153 · Cited by 434
The use of UV irradiation in polymerization
Decker, C. (1998) · Polymer International · doi:10.1002/(sici)1097-0126(199802)45:2<133::aid-pi969>3.0.co;2-f · Cited by 423
3D microfilter device for viable circulating tumor cell (CTC) enrichment from blood
Zheng, S., Lin, H. K., Lu, B., Williams, A., Datar, R., Cote, R. J., & Tai, Y.-C. (2011) · Biomedical Microdevices · doi:10.1007/s10544-010-9485-3 · Cited by 422
Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays
Wood, V., Panzer, M. J., Chen, J., Bradley, M. S., Halpert, J. E., Bawendi, M. G., & Bulović, V. (2009) · Advanced Materials · doi:10.1002/adma.200803256 · Cited by 422
Surface Modification of Poly(dimethylsiloxane) Microfluidic Devices by Ultraviolet Polymer Grafting
Hu, S., Ren, X., Bachman, M., Sims, C. E., Li, G. P., & Allbritton, N. (2002) · Analytical Chemistry · doi:10.1021/ac025700w · Cited by 418
Polymer Imprint Lithography with Molecular-Scale Resolution
Hua, F., Sun, Y., Gaur, A., Meitl, M. A., Bilhaut, L., Rotkina, L., Wang, J., Geil, P., Shim, M., Rogers, J. A., et al. (2004) · Nano Letters · doi:10.1021/nl048355u · Cited by 413
Yang, S. Y., & Rubner, M. F. (2002) · Journal of the American Chemical Society · doi:10.1021/ja017681y · Cited by 389
Plasma Physics and Engineering
Fridman, A., Fridman, A., Kennedy, L. A., & Kennedy, L. A. (2004) · CRC Press eBooks · doi:10.1201/9781482293630 · Cited by 387
Near-field focusing and magnification through self-assembled nanoscale spherical lenses
Lee, J. Y., Hong, B. H., Kim, W. Y., Min, S. K., Kim, Y., Jouravlev, M. V., Bose, R., Kim, K. S., Hwang, I.-C., Kaufman, L. J., et al. (2009) · Nature · doi:10.1038/nature08173 · Cited by 384
Macromolecular plasma-chemistry: an emerging field of polymer science
DENES, F. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.05.001 · Cited by 374
Submicrometer Patterning of Charge in Thin-Film Electrets
Jacobs, H. O., & Whitesides, G. M. (2001) · Science · doi:10.1126/science.1057061 · Cited by 374
Biofilm formation, bacterial adhesion and host response on polymeric implants—issues and prevention
Pavithra, D., & Doble, M. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034003 · Cited by 371
Plasma Treatment for Improved Bonding: A Review
Liston, E. M. (1989) · The Journal of Adhesion · doi:10.1080/00218468908048206 · Cited by 362
Sojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Self-citationWrinkled interfaces: Taking advantage of surface instabilities to pattern polymer surfaces
Rodríguez-Hernández, J. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.07.008 · Cited by 335
Large-area fabrication of superhydrophobic surfaces for practical applications: an overview
Xue, C.-H., Jia, S.-T., Zhang, J., & Ma, J.-Z. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/3/033002 · Cited by 335
Rationalizing the design of polymeric biomaterials
Angelova, N., & Hunkeler, D. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01356-6 · Cited by 318
Oláh, A., Hillborg, H., & Vancso, G. J. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2004.06.005 · Cited by 313
Surface modification of polymers: chemical, biological and surface analytical challenges
Ratner, B. D. (1995) · Biosensors and Bioelectronics · doi:10.1016/0956-5663(95)99218-a · Cited by 303
Hillborg, H., Tomczak, N., Olàh, A., Schönherr, H., & Vancso, G. J. (2004) · Langmuir · doi:10.1021/la035552k · Cited by 299
A review of low-temperature plasma treatment of textile materials
Jelil, R. A. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9152-4 · Cited by 294
Yoshida, S., Hagiwara, K., Hasebe, T., & Hotta, A. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.02.042 · Cited by 286
Ishizaki, T., Saito, N., & Takai, O. (2010) · Langmuir · doi:10.1021/la904447c · Cited by 279
Adhesion enhancement of polymer surfaces by atmospheric plasma treatment
Shenton, M. J., Lovell-Hoare, M. C., & Stevens, G. C. (2001) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/34/18/307 · Cited by 273
Shin, S.-H., Kwon, Y. H., Kim, Y.-H., Jung, J.-Y., Lee, M. H., & Nah, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b01340 · Cited by 263
Plasma modification of polymer surfaces for adhesion improvement
Egitto, F. D., & Matienzo, L. J. (1994) · IBM Journal of Research and Development · doi:10.1147/rd.384.0423 · Cited by 260
A batch fabricated biomimetic dry adhesive
Northen, M. T., & Turner, K. L. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/8/030 · Cited by 249
Stamps, inks and substrates: polymers in microcontact printing
Kaufmann, T., & Ravoo, B. J. (2010) · Polymer Chemistry · doi:10.1039/b9py00281b · Cited by 239
Laser Surface Texturing of Polymers for Biomedical Applications
Riveiro, A., Maçon, A. L. B., del Val, J., Comesaña, R., & Pou, J. (2018) · Frontiers in Physics · doi:10.3389/fphy.2018.00016 · Cited by 236
Laser ablation of organic polymers: Microscopic models for photochemical and thermal processes
Garrison, B. J., & Srinivasan, R. (1985) · Journal of Applied Physics · doi:10.1063/1.335230 · Cited by 233
Valkama, S., Kosonen, H., Ruokolainen, J., Haatainen, T., Torkkeli, M., Serimaa, R., ten Brinke, G., & Ikkala, O. (2004) · Nature Materials · doi:10.1038/nmat1254 · Cited by 233
Chemical and topographical patterning for directed cell attachment
Craighead, H. G., James, C. D., & Turner, A. M. P. (2001) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(01)00005-5 · Cited by 229
Lee, S. J., Oh, S. H., Liu, J., Soker, S., Atala, A., & Yoo, J. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.11.024 · Cited by 226
Phase separation induced ordered patterns in thin polymer blend films
Xue, L., Zhang, J., & Han, Y. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.001 · Cited by 219
Surface Modification of Polymer Substrates for Biomedical Applications
Neděla, O., Slepička, P., & Švorčík, V. (2017) · Materials · doi:10.3390/ma10101115 · Cited by 213
Polymers in conventional and alternative lithography for the fabrication of nanostructures
Acikgoz, C., Hempenius, M. A., Huskens, J., & Vancso, G. J. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.07.025 · Cited by 200
Baidya, A., Ganayee, M. A., Jakka Ravindran, S., Tam, K. C., Das, S. K., Ras, R. H. A., & Pradeep, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b05170 · Cited by 199
Peterson, S. L., McDonald, A., Gourley, P. L., & Sasaki, D. Y. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30166 · Cited by 195
Ma, H., & Hao, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15059f · Cited by 180
Fabricating three‐dimensional polymeric photonic structures by multi‐beam interference lithography
Moon, J. H., Ford, J., & Yang, S. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.663 · Cited by 179
Energy: the microfluidic frontier
Sinton, D. (2014) · Lab Chip · doi:10.1039/c4lc00267a · Cited by 178
Large area dense nanoscale patterning of arbitrary surfaces
Park, M., Chaikin, P. M., Register, R. A., & Adamson, D. H. (2001) · Applied Physics Letters · doi:10.1063/1.1378046 · Cited by 172
Dendrimer‐Mediated Multivalent Binding for the Enhanced Capture of Tumor Cells
Myung, J. H., Gajjar, K. A., Saric, J., Eddington, D. T., & Hong, S. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201105508 · Cited by 169
Role of Plasma Surface Treatments on Wetting and Adhesion
Wolf, R., & Sparavigna, A. C. (2010) · Engineering · doi:10.4236/eng.2010.26052 · Cited by 162
Migliaresi, C., Cohn, D., De Lollis, A., & Fambri, L. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070430109 · Cited by 158
Xu, Q. F., Mondal, B., & Lyons, A. M. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200741f · Cited by 158
Activated gas plasma surface treatment of polymers for adhesive bonding
Hall, J. R., Westerdahl, C. A. L., Devine, A. T., & Bodnar, M. J. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070131006 · Cited by 157
Moghimifar, V., Raisi, A., & Aroujalian, A. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.02.012 · Cited by 144
Biologically Active Protein Nanoarrays Generated Using Parallel Dip‐Pen Nanolithography
Lee, S. W., Oh, B. ‐., Sanedrin, R. G., Salaita, K. S., Fujigaya, T., & Mirkin, C. A. (2006) · Advanced Materials · doi:10.1002/adma.200600070 · Cited by 143
Ye, H., Gu, Z., & Gracias, D. H. (2006) · Langmuir · doi:10.1021/la052030r · Cited by 134
Ultrathin high-resolution flexographic printing using nanoporous stamps
Kim, S., Sojoudi, H., Zhao, H., Mariappan, D. D., McKinley, G. H., Gleason, K. K., & Hart, A. J. (2016) · Science Advances · doi:10.1126/sciadv.1601660 · Cited by 132
Self-citationEffects of annealing on the structural and mechanical properties of electrospun polymeric nanofibres
Tan, E. P. S., & Lim, C. T. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/10/034 · Cited by 127
Dynamics of networks during absence seizure's on- and offset in rodents and man
Lüttjohann, A., & van Luijtelaar, G. (2015) · Frontiers in Physiology · doi:10.3389/fphys.2015.00016 · Cited by 125
Boxshall, K., Wu, M., Cui, Z., Cui, Z., Watts, J. F., & Baker, M. (2006) · Surface and Interface Analysis · doi:10.1002/sia.2274 · Cited by 117
Sojoudi, H., McKinley, G. H., & Gleason, K. K. (2014) · Materials Horizons · doi:10.1039/c4mh00162a · Cited by 111
Self-citationLi, L., Hashaikeh, R., & Arafat, H. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.02.037 · Cited by 111
Study of ultraviolet light and ozone surface modification of polypropylene
MacManus, L. F., Walzak, M. J., & McIntyre, N. S. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990715)37:14<2489::aid-pola23>3.0.co;2-g · Cited by 106
i3DP, a robust 3D printing approach enabling genetic post-printing surface modification
Wang, X., Cai, X., Guo, Q., Zhang, T., Kobe, B. A., & Yang, J. (2013) · Chemical Communications · doi:10.1039/c3cc45817b · Cited by 106
PDMS surface modification using atmospheric pressure plasma
Kim, H. T., & Jeong, O. C. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.02.084 · Cited by 105
A Survey of Surface Modification Techniques for Next-Generation Shape Memory Polymer Stent Devices
Govindarajan, T., & Shandas, R. (2014) · Polymers · doi:10.3390/polym6092309 · Cited by 103
Verma, A., & Sharma, A. (2010) · Advanced Materials · doi:10.1002/adma.201002768 · Cited by 101
Why the dish makes a difference: Quantitative comparison of polystyrene culture surfaces
Zeiger, A. S., Hinton, B., & Vliet, K. J. V. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.035 · Cited by 100
Clinical Evaluation of Laser Microtexturing for Soft Tissue and Bone Attachment to Dental Implants
Pecora, G. E., Ceccarelli, R., Bonelli, M., Alexander, H., & Ricci, J. L. (2009) · Implant Dentistry · doi:10.1097/id.0b013e31818c5a6d · Cited by 100
Wettability control and patterning of PDMS using UV–ozone and water immersion
Ma, K., Rivera, J. O. B., Hirasaki, G. J., & Biswal, S. L. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.036 · Cited by 94
Surface modification of polymers for biocompatibility via exposure to extreme ultraviolet radiation
Ahad, I. U., Bartnik, A. S., Fiedorowicz, H., Kostecki, J., Korczyc, B., Ciach, T., & Brabazon, D. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34958 · Cited by 94
The action of oxygen corona and of ozone on polyethylene
Cooper, G. D., & Prober, M. (1960) · Journal of Polymer Science · doi:10.1002/pol.1960.1204414411 · Cited by 90
Reduction Photolithography Using Microlens Arrays: Applications in Gray Scale Photolithography
Wu, H., Odom, T. W., & Whitesides, G. M. (2002) · Analytical Chemistry · doi:10.1021/ac020151f · Cited by 89
Surface characterization of plasma-treated and PEG-grafted PDMS for micro fluidic applications
Sharma, V., Dhayal, M., Govind, G., Shivaprasad, S. M., & Jain, S. (2007) · Vacuum · doi:10.1016/j.vacuum.2007.02.004 · Cited by 88
Coclite, A. M., Shi, Y. J., & Gleason, K. K. (2012) · Advanced Materials · doi:10.1002/adma.201200682 · Cited by 85
Marchand‐Brynaert, J., Deldime‐Rubbens, M., Dupont, I. E., Dewez, J., & Schneider, Y. (1995) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1995.1319 · Cited by 84
Lindner, M., Rodler, N., Jesdinszki, M., Schmid, M., & Sängerlaub, S. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45842 · Cited by 84
A new and emerging technology: Laser-induced surface modification of polymers
Özdemir, M., & Sadıkoğlu, H. (1998) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(98)00035-1 · Cited by 83
Müller‐Buschbaum, P., Bauer, E., Wunnicke, O., et al. (2005) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/17/9/006 · Cited by 81
Surface characterization of plasma-treated polypropylene fibers
Weı, Q. (2004) · Materials Characterization · doi:10.1016/j.matchar.2004.05.003 · Cited by 79
Chemical vapor deposition - based synthesis of conductive polydopamine thin-films
Coskun, H., Aljabour, A., Uiberlacker, L. M., Strobel, M., Hild, S., Cobet, C., Farka, D., Stadler, P., & Sariçiftçi, N. S. (2017) · Thin Solid Films · doi:10.1016/j.tsf.2017.10.063 · Cited by 77
Surface patterns from block copolymer self-assembly
Kim, H., & Hinsberg, W. D. (2008) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.3000056 · Cited by 71
Davies, R. T., Kim, D., & Park, J. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/5/055003 · Cited by 68
Li, X., Tian, H., Ding, Y., Shao, J., & Wei, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402043u · Cited by 67
Scalable and durable polymeric icephobic and hydrate-phobic coatings
Sojoudi, H., Arabnejad, H., Raiyan, A., Shirazi, S. A., McKinley, G. H., & Gleason, K. K. (2018) · Soft Matter · doi:10.1039/c8sm00225h · Cited by 62
Self-citationSojoudi, H., Walsh, M. R., Gleason, K. K., & McKinley, G. H. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b00413 · Cited by 58
Self-citationStable Wettability Control of Nanoporous Microstructures by iCVD Coating of Carbon Nanotubes
Sojoudi, H., Kim, S., Zhao, H., Annavarapu, R. K., Mariappan, D. D., Hart, A. J., McKinley, G. H., & Gleason, K. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13713 · Cited by 58
Self-citationDesigning Durable Vapor‐Deposited Surfaces for Reduced Hydrate Adhesion
Sojoudi, H., Walsh, M. R., Gleason, K. K., & McKinley, G. H. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500003 · Cited by 55
Self-citationCheneler, D., & Bowen, J. (2012) · Soft Matter · doi:10.1039/c2sm26502h · Cited by 47
A Route Towards Sustainability Through Engineered Polymeric Interfaces
Reeja‐Jayan, B., Kováčik, P., Yang, R., Sojoudi, H., Ugur, A., Kim, D. H., Petruczok, C. D., Wang, X., Liu, A., & Gleason, K. K. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400117 · Cited by 45
Self-citationCho, A. Y., Shin, D. M., Jung, H. W., Hyun, J. C., Lee, J., Cho, D., & Joo, Y. L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33262 · Cited by 42
Effect of laser modified surface microtopochemistry on endothelial cell growth
Duncan, A. C., Rouais, F., Lazare, S., Bordenave, L., & Baquey, C. (2006) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2006.09.013 · Cited by 40
Lang, V., Roch, T., & Lasagni, A. F. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600173 · Cited by 40
Chemical Modification of Polymer Ion‐Selective Membrane Electrode Surfaces
Pawlak, M., & Bakker, E. (2014) · Electroanalysis · doi:10.1002/elan.201300449 · Cited by 39
Atmospheric-pressure cold plasma processing technology
Herbert, T. (2007) · Elsevier eBooks · doi:10.1533/9781845692575.1.79 · Cited by 38
Photogeneration of gelatinous networks from pre‐existing polymers
Carroll, G. T., Triplett, L. D., Moscatelli, A., Koberstein, J. T., & Turro, N. J. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34133 · Cited by 22
Research of biocidal effect of corona discharges on poly(lactic acid) packaging films
Stepczyńska, M. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.10.038 · Cited by 19
Guo, J. K., Liu, L., Liu, H. S., Gan, K., Liu, X., Song, X., Niu, D., & Chen, T. (2016) · High Performance Polymers · doi:10.1177/0954008316667460 · Cited by 16
Micropatterning by controlled liquid instabilities and its applications
Hyun, D. C., Park, M., & Jeong, U. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03090d · Cited by 10
Preparation and Biomedical Application of Self-Organized Honeycomb-Patterned Polymer Films
Kawano, T., Iwama, N., Ishihata, H., Shimauchi, H., & Shimomura, M. (2012) · Springer eBooks · doi:10.1007/978-4-431-54070-0_4 · Cited by 7
Cited by
Polymer scaffolds as drug delivery systems
Calori, I. R., Braga, G., de Jesus, P. D. C. C., Bi, H., & Tedesco, A. C. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109621 · Cited by 288
Kurhade, R. R., Shaikh, M. S., Nagulwar, V., & Kale, M. A. (2025) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2024.2391973 · Cited by 55
The advanced development of floatable photocatalysts: Preparation, advantages, and application
Liu, X., Pan, J., Huang, H., Zhang, X., Sun, N., Gu, C., Zhuang, Y., & Wang, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146868 · Cited by 35
Metadata
- Authors
- Nemani, S. K., Annavarapu, R. K., Mohammadian, B., Raiyan, A., Heil, J., Haque, M. A., Abdelaal, A., & Sojoudi, H.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2018-11-14
- Volume
- 5
- Issue
- 24
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2900622925
- Cited by
- 484
- References
- 135
- FWCI
- 8.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.