The DOI matches its Crossref record; 416 of the 416 references it cites were found in a registry or an index.
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Abstract
Owing to high specific energy, low cost, and environmental friendliness, lithium–sulfur (Li–S) batteries hold great promise to meet the increasing demand for advanced energy storage beyond portable electronics, and to mitigate environmental problems. However, the application of Li–S batteries is challenged by several obstacles, including their short life and low sulfur utilization, which become more serious when sulfur loading is increased to the practically accepted level above 3–5 mg cm−2. More and more efforts have been made recently to overcome the barriers toward commercially viable Li–S batteries with a high sulfur loading. This review highlights the recent progress in high‐sulfur‐loading Li–S batteries enabled by hierarchical design principles at multiscale. Particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are under specific concerns. Hierarchy in the multiscale design is proposed to guide the future development of high‐sulfur‐loading Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 201–400 of 416
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
In situ study of dendritic growth inlithium/PEO-salt/lithium cells
Brissot, C., Rosso, M., Chazalviel, J.-N., Baudry, P., & Lascaud, S. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10055-x · Cited by 365
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Strubel, P., Thieme, S., Biemelt, T., Helmer, A., Oschatz, M., Brückner, J., Althues, H., & Kaskel, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402768 · Cited by 352
Burke, C. M., Pande, V., Khetan, A., Viswanathan, V., & McCloskey, B. D. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1505728112 · Cited by 348
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Self-citationA Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Self-citationZhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Self-citationRecent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Cao, J., Chen, C., Zhao, Q., Zhang, N., Lu, Q., Wang, X., Niu, Z., & Chen, J. (2016) · Advanced Materials · doi:10.1002/adma.201602262 · Cited by 339
Radical or Not Radical: Revisiting Lithium–Sulfur Electrochemistry in Nonaqueous Electrolytes
Cuisinier, M., Hart, C. J., Balasubramanian, M., Garsuch, A., & Nazar, L. F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401801 · Cited by 335
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries
Wang, J., He, Y., & Yang, J. (2015) · Advanced Materials · doi:10.1002/adma.201402569 · Cited by 331
High-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
High Efficiency Immobilization of Sulfur on Nitrogen-Enriched Mesoporous Carbons for Li–S Batteries
Sun, F., Wang, J., Chen, H., Li, W., Qiao, W., Long, D., & Ling, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400958x · Cited by 330
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Li, Z., Yuan, L., Yi, Z., Liu, Y., Xin, Y., Zhang, Z., & Huang, Y. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Self-citationA Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
Xu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Wang, H., Zhang, Q., Yao, H., Liang, Z., Lee, H.-W., Hsu, P.-C., Zheng, G., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl503730c · Cited by 312
Self-citationConfined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Ding, Y., Kopold, P., Hahn, K., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504294 · Cited by 310
Insight into the Effect of Boron Doping on Sulfur/Carbon Cathode in Lithium–Sulfur Batteries
Yang, C.-P., Yin, Y.-X., Ye, H., Jiang, K.-C., Zhang, J., & Guo, Y.-G. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501627f · Cited by 310
Nanostructured Li2S–C Composites as Cathode Material for High-Energy Lithium/Sulfur Batteries
Cai, K., Song, M.-K., Cairns, E. J., & Zhang, Y. (2012) · Nano Letters · doi:10.1021/nl303965a · Cited by 307
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Sun, L., Li, M., Jiang, Y., Kong, W., Jiang, K., Wang, J., & Fan, S. (2014) · Nano Letters · doi:10.1021/nl501486n · Cited by 288
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201300680 · Cited by 287
Li‐S Battery Analyzed by UV/Vis in Operando Mode
Patel, M. U. M., Demir‐Cakan, R., Morcrette, M., Tarascon, J., Gaberscek, M., & Dominko, R. (2013) · ChemSusChem · doi:10.1002/cssc.201300142 · Cited by 286
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
Wang, J., Chen, J., Konstantinov, K., Zhao, L., Ng, S. H., Wang, G. X., Guo, Z. P., & Liu, H. K. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.12.046 · Cited by 284
Recent Advances in Lithium Sulfide Cathode Materials and Their Use in Lithium Sulfur Batteries
Son, Y., Lee, J., Son, Y., Jang, J., & Cho, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500110 · Cited by 283
Chung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Durable Carbon-Coated Li2S Core–Shell Spheres for High Performance Lithium/Sulfur Cells
Nan, C., Lin, Z., Liao, H., Song, M.-K., Li, Y., & Cairns, E. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412943h · Cited by 282
Jiang, J., Zhu, J., Ai, W., Wang, X., Wang, Y., Zou, C., Huang, W., & Yu, T. (2015) · Nature Communications · doi:10.1038/ncomms9622 · Cited by 281
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Toward More Reliable Lithium–Sulfur Batteries: An All-Graphene Cathode Structure
Fang, R., Zhao, S., Pei, S., Qian, X., Hou, P.-X., Cheng, H.-M., Liu, C., & Li, F. (2016) · ACS Nano · doi:10.1021/acsnano.6b04019 · Cited by 280
Fu, Y., & Manthiram, A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300950m · Cited by 278
Gu, X., Tong, C.-J., Lai, C., Qiu, J., Huang, X., Yang, W., Wen, B., Liu, L.-M., Hou, Y., & Zhang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04255k · Cited by 270
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Sun, Q., He, B., Zhang, X.-Q., & Lu, A.-H. (2015) · ACS Nano · doi:10.1021/acsnano.5b03488 · Cited by 265
Lee, S.-Y., Choi, K.-H., Choi, W.-S., Kwon, Y. H., Jung, H.-R., Shin, H.-C., & Kim, J. Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24260a · Cited by 263
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie · doi:10.1002/ange.201300680 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationProbing the Lithium–Sulfur Redox Reactions: A Rotating-Ring Disk Electrode Study
Lu, Y.-C., He, Q., & Gasteiger, H. A. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500382s · Cited by 259
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Self-citationIonic liquid-enhanced solid state electrolyte interface (SEI) for lithium–sulfur batteries
Zheng, J., Gu, M., Chen, H., Meduri, P., Engelhard, M. H., Zhang, J.-G., Liu, J., & Xiao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11553d · Cited by 255
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Self-citationHuang, J.-Q., Liu, X.-F., Zhang, Q., Chen, C.-M., Zhao, M.-Q., Zhang, S.-M., Zhu, W., Qian, W.-Z., & Wei, F. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.003 · Cited by 254
Self-citationAcacia Senegal–Inspired Bifunctional Binder for Longevity of Lithium–Sulfur Batteries
Li, G., Ling, M., Ye, Y., Li, Z., Guo, J., Yao, Y., Zhu, J., Lin, Z., & Zhang, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500878 · Cited by 250
Advanced engineering of nanostructured carbons for lithium–sulfur batteries
Wang, J.-G., Xie, K., & Wei, B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.006 · Cited by 247
A high performance lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte
Wang, L., Wang, Y., & Xia, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00058k · Cited by 247
Jung, D. S., Hwang, T. H., Lee, J. H., Koo, H. Y., Shakoor, R. A., Kahraman, R., Jo, Y. N., Park, M., & Choi, J. W. (2014) · Nano Letters · doi:10.1021/nl501383g · Cited by 247
Heine, J., Hilbig, P., Qi, X., Niehoff, P., Winter, M., & Bieker, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0011507jes · Cited by 246
To, J. W. F., Chen, Z., Yao, H., He, J., Kim, K., Chou, H.-H., Pan, L., Wilcox, J., Cui, Y., & Bao, Z. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00149 · Cited by 245
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Weng, W., Pol, V. G., & Amine, K. (2013) · Advanced Materials · doi:10.1002/adma.201204051 · Cited by 241
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
A new finding on the role of LiNO3 in lithium-sulfur battery
Zhang, S. S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.009 · Cited by 239
Xu, T., Song, J., Gordin, M. L., Sohn, H., Yu, Z., Chen, S., & Wang, D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4035784 · Cited by 238
Chen, T., Cheng, B., Zhu, G., Chen, R., Hu, Y., Ma, L., Lv, H., Wang, Y., Liang, J., Tie, Z., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04433 · Cited by 237
Chen, H., Dong, W., Ge, J., Wang, C., Wu, X., Lu, W., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01910 · Cited by 233
Han, S.-C., Song, M.-S., Lee, H., Kim, H.-S., Ahn, H.-J., & Lee, J.-Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1576766 · Cited by 232
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Waluś, S., Barchasz, C., Colin, J.-F., Martin, J.-F., Elkaïm, E., Leprêtre, J.-C., & Alloin, F. (2013) · Chemical Communications · doi:10.1039/c3cc43766c · Cited by 229
Electrochemical (De)Lithiation of 1D Sulfur Chains in Li–S Batteries: A Model System Study
Yang, C.-P., Yin, Y.-X., Guo, Y.-G., & Wan, L.-J. (2015) · Journal of the American Chemical Society · doi:10.1021/ja513009v · Cited by 226
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Tachikawa, N., Yamauchi, K., Takashima, E., Park, J.-W., Dokko, K., & Watanabe, M. (2011) · Chemical Communications · doi:10.1039/c1cc12415c · Cited by 223
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., & Zhang, X. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201202127 · Cited by 223
Protected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
Direct Observation of Sulfur Radicals as Reaction Media in Lithium Sulfur Batteries
Wang, Q., Zheng, J., Walter, É., Pan, H., Lv, D., Zuo, P., Chen, H., Deng, Z. D., Liaw, B. Y., Yu, X., et al. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0851503jes · Cited by 218
Lin, D., Zhuo, D., Liu, Y., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06324 · Cited by 217
Jin, S., Xin, S., Wang, L., Du, Z., Cao, L., Chen, J., Kong, X., Gong, M., Lu, J., Zhu, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602704 · Cited by 216
High performance lithium metal anode: Progress and prospects
Lang, J., Qi, L., Luo, Y., & Wu, H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.006 · Cited by 215
A Cable‐Shaped Lithium Sulfur Battery
Fang, X., Weng, W., Ren, J., & Peng, H. (2016) · Advanced Materials · doi:10.1002/adma.201504241 · Cited by 211
Self-citationChong, W. G., Huang, J.-Q., Xu, Z., Qin, X., Wang, X., & Kim, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604815 · Cited by 205
Self-citationLu, S., Chen, Y., Wu, X., Wang, Z., & Li, Y. (2014) · Scientific Reports · doi:10.1038/srep04629 · Cited by 203
Lithium–Sulfur Batteries Based on Nitrogen‐Doped Carbon and an Ionic‐Liquid Electrolyte
Sun, X., Wang, X., Mayes, R. T., & Dai, S. (2012) · ChemSusChem · doi:10.1002/cssc.201200101 · Cited by 199
Yim, T., Han, S. H., Park, N. H., Park, M., Lee, J. H., Shin, J., Choi, J. W., Jung, Y., Jo, Y. N., Yu, J., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602498 · Cited by 197
Miao, L., Wang, W., Yuan, K., et al. (2014) · Chemical Communications · doi:10.1039/c4cc03410d · Cited by 194
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Su, Y., & Manthiram, A. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.06.002 · Cited by 193
Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium–Sulfur Battery
Yu, B.-C., Park, K., Jang, J.-H., & Goodenough, J. B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00209 · Cited by 192
Amylopectin Wrapped Graphene Oxide/Sulfur for Improved Cyclability of Lithium–Sulfur Battery
Zhou, W., Chen, H., Yu, Y., Wang, D., Cui, Z., DiSalvo, F. J., & Abruña, H. D. (2013) · ACS Nano · doi:10.1021/nn403237b · Cited by 190
Papandrea, B., Xu, X., Xu, Y., Chen, C.-Y., Lin, Z., Wang, G., Luo, Y., Liu, M., Huang, Y., Mai, L., et al. (2016) · Nano Research · doi:10.1007/s12274-016-1005-1 · Cited by 190
Mi, K., Chen, S., Xi, B., Kai, S., Jiang, Y., Feng, J., Qian, Y., & Xiong, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604265 · Cited by 190
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Sulfur Nanodots Electrodeposited on Ni Foam as High-Performance Cathode for Li–S Batteries
Zhao, Q., Hu, X., Zhang, K., Zhang, N., Hu, Y., & Chen, J. (2015) · Nano Letters · doi:10.1021/nl504263m · Cited by 185
Zhu, L., Peng, H.-J., Liang, J., Huang, J.-Q., Chen, C.-M., Guo, X., Zhu, W., Li, P., & Zhang, Q. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.062 · Cited by 184
Self-citationCarbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Waluś, S., Barchasz, C., Bouchet, R., Leprêtre, J., Colin, J., Martin, J., Elkaïm, E., Baehtz, C., & Alloin, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500165 · Cited by 184
Yuan, S., Bao, J. L., Wang, L., Xia, Y., Truhlar, D. G., & Wang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501733 · Cited by 184
Chen, S., Dai, F., Gordin, M. L., Yu, Z., Gao, Y., Song, J., & Wang, D. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511830 · Cited by 183
Yu, M., Ma, J., Xie, M., Song, H., Tian, F., Xu, S., Zhou, Y., Li, B., Wu, D., Qiu, H., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602347 · Cited by 180
Polysulfide-Blocking Microporous Polymer Membrane Tailored for Hybrid Li-Sulfur Flow Batteries
Li, C., Ward, A. L., Doris, S. E., Pascal, T. A., Prendergast, D., & Helms, B. A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02078 · Cited by 178
Cell energy density and electrolyte/sulfur ratio in Li–S cells
Hagen, M., Fanz, P., & Tübke, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.018 · Cited by 177
The role of the anions in the growth speed of fractal electrodeposits
Fleury, V., Chazalviel, J., Rosso, M., & Sapoval, B. (1990) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(90)87434-l · Cited by 177
Gordin, M. L., Dai, F., Chen, S., Xu, T., Song, J., Tang, D., Azimi, N., Zhang, Z., & Wang, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501665s · Cited by 176
He, J., Chen, Y., Lv, W., Wen, K., Xu, C., Zhang, W., Qin, W., & He, W. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00272 · Cited by 172
X-ray Absorption Spectra of Dissolved Polysulfides in Lithium–Sulfur Batteries from First-Principles
Pascal, T. A., Wujcik, K. H., Velasco‐Vélez, J., Wu, C., Teran, A. A., Kapilashrami, M., Cabana, J., Guo, J., Salmerón, M., Balsara, N. P., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500260s · Cited by 172
Effective strategies for stabilizing sulfur for advanced lithium–sulfur batteries
Ogoke, O., Wu, G., Wang, X., Casimir, A., Ma, L., Wu, T., & Lu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07864h · Cited by 172
Ji, X., Liu, D.-Y., Prendiville, D. G., Zhang, Y., Liu, X., & Stucky, G. D. (2012) · Nano Today · doi:10.1016/j.nantod.2011.11.002 · Cited by 169
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Jin, C., Zhang, W., Zhuang, Z., Wang, J., Huang, H., Gan, Y., Xia, Y., Liang, C., Zhang, J., & Tao, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07620c · Cited by 165
Chang, Z., Dou, H., Ding, B., Wang, J., Wang, Y., Hao, X., & MacFarlane, D. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07202j · Cited by 165
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Brückner, J., Thieme, S., Grossmann, H. T., Dörfler, S., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.143 · Cited by 163
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
Balach, J., Singh, H. K., Gomoll, S., Jaumann, T., Klose, M., Oswald, S., Richter, M., Eckert, J., & Giebeler, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03642 · Cited by 161
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Thieme, S., Brückner, J., Bauer, I., Oschatz, M., Borchardt, L., Althues, H., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10641a · Cited by 156
Zhang, M., Yu, C., Zhao, C., Song, X., Han, X., Liu, S., Hao, C., & Qiu, J. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.04.002 · Cited by 156
Hagen, M., Dörfler, S., Fanz, P., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.004 · Cited by 154
Li, H., Yang, X., Wang, X., Liu, M., Ye, F., Wang, J., Qiu, Y., Li, W., & Zhang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.007 · Cited by 152
Ma, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 152
Li, L., Zhou, G., Yin, L., Koratkar, N. A., Li, F., & Cheng, H. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.008 · Cited by 151
Insight into lithium–metal anodes in lithium–sulfur batteries with a fluorinated ether electrolyte
Zu, C., Azimi, N., Zhang, Z., & Manthiram, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03195h · Cited by 150
Effect of the Anion Activity on the Stability of Li Metal Anodes in Lithium‐Sulfur Batteries
Cao, R., Chen, J., Han, K. S., Xu, W., Mei, D., Bhattacharya, P., Engelhard, M., Mueller, K. T., Liu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505074 · Cited by 149
Advanced Lithium–Sulfur Batteries Enabled by a Bio‐Inspired Polysulfide Adsorptive Brush
Zhao, T., Ye, Y., Peng, X., Divitini, G., Kim, H., Lao, C., Coxon, P. R., Xi, K., Liu, Y., Ducati, C., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604069 · Cited by 146
A high sulfur content composite with core–shell structure as cathode material for Li–S batteries
Miao, L., Wang, W., Wang, A., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12079a · Cited by 143
Wang, G., Lai, Y., Zhang, Z., Li, J., & Zhang, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07133f · Cited by 142
Improvement of cycle property of sulfur electrode for lithium/sulfur battery
Choi, Y., Kim, K.-W., Ahn, H., & Ahn, J. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.02.098 · Cited by 141
SnO 2 as a high-efficiency polysulfide trap in lithium–sulfur batteries
Liu, J., Yuan, L., Yuan, K., Li, Z., Hao, Z., Xiang, J., & Huang, Y. (2016) · Nanoscale · doi:10.1039/c6nr02345b · Cited by 140
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04172k · Cited by 139
Enhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
A Foldable Lithium–Sulfur Battery
Li, L., Wu, Z. P., Sun, H., Chen, D., Gao, J., Suresh, S., Chow, P. K., Singh, C. V., & Koratkar, N. A. (2015) · ACS Nano · doi:10.1021/acsnano.5b05068 · Cited by 139
A core–shell electrode for dynamically and statically stable Li–S battery chemistry
Chung, S., Chang, C., & Manthiram, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01280a · Cited by 139
Preparation and performance of a core–shell carbon/sulfur material for lithium/sulfur battery
Wang, C., Chen, J., Shi, Y., Zheng, M., & Dong, Q. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.06.019 · Cited by 138
Shi, J., Tang, C., Peng, H., Zhu, L. Z., Cheng, X., Huang, J., Zhu, W., & Zhang, Q. (2015) · Small · doi:10.1002/smll.201501467 · Cited by 138
Self-citationUnderstanding the Effect of a Fluorinated Ether on the Performance of Lithium–Sulfur Batteries
Azimi, N., Xue, Z., Bloom, I., Gordin, M. L., Wang, D., Daniel, T. B., Takoudis, C. G., & Zhang, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01412 · Cited by 135
Wang, L., Yang, Z., Nie, H., Gu, C., Hua, W., Xu, X., Chen, X., Chen, Y. I., & Huang, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07027b · Cited by 133
A Sulfur Cathode with Pomegranate‐Like Cluster Structure
Li, W., Liang, Z., Lu, Z., Yao, H., Seh, Z. W., Yan, K., Zheng, G. W., & Cui, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500211 · Cited by 131
Balach, J., Jaumann, T., Klose, M., Oswald, S., Eckert, J., & Giebeler, L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.018 · Cited by 129
Hu, J. J., Long, G., Liu, S. H., Li, G., & Gao, X. (2014) · Chemical Communications · doi:10.1039/c4cc06666a · Cited by 128
Hybrid Lithium–Sulfur Batteries with a Solid Electrolyte Membrane and Lithium Polysulfide Catholyte
Yu, X., Bi, Z., Zhao, F., & Manthiram, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04209 · Cited by 126
Zhao, M., Peng, H., Tian, G., Zhang, Q., Huang, J., Cheng, X., Tang, C., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201402488 · Cited by 123
Self-citationA Hierarchical Particle–Shell Architecture for Long‐Term Cycle Stability of Li2S Cathodes
Wu, F., Lee, J. T., Fan, F., Nitta, N., Kim, H., Zhu, T., & Yushin, G. N. (2015) · Advanced Materials · doi:10.1002/adma.201502289 · Cited by 123
Chemical routes toward long-lasting lithium/sulfur cells
Liu, M., Ye, F., Li, W., Li, H., & Zhang, Y. (2016) · Nano Research · doi:10.1007/s12274-016-1027-8 · Cited by 120
Hagen, M., Dörfler, S., Althues, H., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.004 · Cited by 119
Lithium Metal Anodes and Rechargeable Lithium Metal Batteries
Zhang, J.-G., Xu, W., & Henderson, W. A. (2017) · Springer Series in Materials Science · doi:10.1007/978-3-319-44054-5 · Cited by 119
Systematic Effect for an Ultralong Cycle Lithium–Sulfur Battery
Wu, F., Ye, Y., Chen, R., Qian, J., Zhao, T., Li, L., & Li, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02864 · Cited by 116
Guo, M., Huang, J., Kong, X., Peng, H., Shui, H., Qian, F.-Y., Zhu, L. Z., Zhu, W., & Zhang, Q. (2016) · New Carbon Materials · doi:10.1016/s1872-5805(16)60019-7 · Cited by 115
Self-citationRen, G., Li, S., Fan, Z.-X., Warzywoda, J., & Fan, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07446d · Cited by 114
Why PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Du, W., Yin, Y., Zeng, X., Shi, J., Zhang, S., Wan, L., & Guo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07468 · Cited by 112
Infiltrated Porous Polymer Sheets as Free‐Standing Flexible Lithium‐Sulfur Battery Electrodes
Wu, F., Zhao, E., Gordon, D., Xiao, Y., Hu, C., & Yushin, G. N. (2016) · Advanced Materials · doi:10.1002/adma.201600757 · Cited by 112
Fan, C., Yuan, H., Li, H., Wang, H., Li, W., Sun, H., Wu, X., & Zhang, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04578 · Cited by 112
Kim, J. H., Seo, J., Choi, J., Shin, D., Carter, M., Jeon, Y., Wang, C., Hu, L., & Paik, U. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06190 · Cited by 111
Covalent Bond Glued Sulfur Nanosheet-Based Cathode Integration for Long-Cycle-Life Li–S Batteries
Wang, L., Dong, Z., Dong, W., Zhang, F., & Jin, J. (2013) · Nano Letters · doi:10.1021/nl403715h · Cited by 110
Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst
Ding, N., Zhou, L., Zhou, C., Geng, D., Jin, Y., Chien, S. W., Liu, Z., Ng, M., Yu, A., Hor, T. S. A., et al. (2016) · Scientific Reports · doi:10.1038/srep33154 · Cited by 109
Hou, T.-Z., Peng, H., Huang, J., Zhang, Q., & Li, B. (2015) · 2D Materials · doi:10.1088/2053-1583/2/1/014011 · Cited by 108
Self-citationA simple melting-diffusing-reacting strategy to fabricate S/NiS 2 –C for lithium–sulfur batteries
Lu, Y., Li, X., Liang, J., Hu, L., Zhu, Y., & Qian, Y. (2016) · Nanoscale · doi:10.1039/c6nr05626a · Cited by 108
A lithium sulfur battery with high power density
Nagata, H., & Chikusa, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.106 · Cited by 107
Ma, J., Fang, Z., Yan, Y. G., Yang, Z., Gu, L., Hu, Y., Li, H., Wang, Z., & Huang, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500046 · Cited by 104
Xu, H., Qie, L., & Manthiram, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.028 · Cited by 100
Song, J., Yu, Z., Xu, T., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00742e · Cited by 97
A high-density graphene–sulfur assembly: a promising cathode for compact Li–S batteries
Zhang, C., Liu, D.-H., Lv, W. Z., Wang, D., Wei, W., Zhou, G., Wang, S., Li, F., Li, B., Kang, F., et al. (2015) · Nanoscale · doi:10.1039/c4nr06863g · Cited by 95
Sun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 95
Self-citationBifunctional separator as a polysulfide mediator for highly stable Li–S batteries
Abbas, S. A., Ibrahem, M., Hu, L., Lin, C., Fang, J., Boopathi, K. M., Wang, P., Li, L., & Chu, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02272c · Cited by 93
Zeng, F., Jin, Z., Yuan, K., Liu, S., Cheng, X., Wang, A., Wang, W., & Yang, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02680j · Cited by 93
Self-citationLi, Y., Ye, D., Liu, W., Shi, B., Guo, R., Zhao, H., Pei, H., Xu, J., & Xie, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04270 · Cited by 91
Shi, J., Peng, H., Zhu, L. Z., Zhu, W., & Zhang, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.031 · Cited by 89
Self-citationBreaking Down the Crystallinity: The Path for Advanced Lithium Batteries
Zu, C., Dolocan, A., Xiao, P., Stauffer, S. K., Henkelman, G., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501933 · Cited by 84
Balach, J., Jaumann, T., Mühlenhoff, S., Eckert, J., & Giebeler, L. (2016) · Chemical Communications · doi:10.1039/c6cc03743g · Cited by 84
Yan, J., Liu, X., He, Q., Li, W., Zhou, Y., Yao, M., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02533 · Cited by 83
Schneider, A., Weidmann, C., Suchomski, C., Sommer, H., Janek, J., & Brezesinski, T. (2015) · Chemistry of Materials · doi:10.1021/cm504460p · Cited by 82
Wei, Y., Tao, Y., Kong, Z., Liu, L., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.07.005 · Cited by 82
Ding, N., Lum, Y., Chen, S., Chien, S. W., Hor, T. S. A., Liu, Z., & Zong, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05659k · Cited by 80
Guar gum as a novel binder for sulfur composite cathodes in rechargeable lithium batteries
Li, Q., Yang, H., Xie, L., Yang, J., NuLi, Y., & Wang, J. (2016) · Chemical Communications · doi:10.1039/c6cc07250j · Cited by 80
Hoffmann, C., Thieme, S., Brückner, J., Oschatz, M., Biemelt, T., Mondin, G., Althues, H., & Kaskel, S. (2014) · ACS Nano · doi:10.1021/nn503394u · Cited by 79
Luo, L., Chung, S., & Manthiram, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07709a · Cited by 79
Ma, Q., Fang, Z., Liu, P., Ma, J., Qi, X., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., et al. (2016) · ChemElectroChem · doi:10.1002/celc.201500520 · Cited by 78
Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder
Sun, J., Huang, Y., Wang, W., et al. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.04.016 · Cited by 77
Niu, S., Lv, W. Z., Zhou, G., Shi, H., Qin, X., Zheng, C., Zhou, T., Luo, C., Deng, Y., Li, B., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.044 · Cited by 77
Chloride‐Reinforced Carbon Nanofiber Host as Effective Polysulfide Traps in Lithium–Sulfur Batteries
Fan, L., Zhuang, H. L., Zhang, K., Cooper, V. R., Li, Q., & Lü, Y. (2016) · Advanced Science · doi:10.1002/advs.201600175 · Cited by 74
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Chakraborty, G., Park, I.-H., Medishetty, R., & Vittal, J. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01049 · Cited by 928
Metadata
- Authors
- Peng, H., Huang, J., Cheng, X., & Zhang, Q.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-05-08
- Volume
- 7
- Issue
- 24
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2612686288
- Cited by
- 1,746
- References
- 416
- FWCI
- 88.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.