The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Abstract
Safety, nontoxicity, and durability directly determine the applicability of the essential characteristics of the lithium (Li)‐ion battery. Particularly, for the lithium–sulfur battery, due to the low ignition temperature of sulfur, metal lithium as the anode material, and the use of flammable organic electrolytes, addressing security problems is of increased difficulty. In the past few years, two basic electrolyte systems are studied extensively to solve the notorious safety issues. One system is the conventional organic liquid electrolyte, and the other is the inorganic solid‐state or quasi‐solid‐state composite electrolyte. Here, the recent development of engineered liquid electrolytes and design considerations for solid electrolytes in tackling these safety issues are reviewed to ensure the safety of electrolyte systems between sulfur cathode materials and the lithium‐metal anode. Specifically, strategies for designing and modifying liquid electrolytes including introducing gas evolution, flame, aqueous, and dendrite‐free electrolytes are proposed. Moreover, the considerations involving a high‐performance Li+ conductor, air‐stable Li+ conductors, and stable interface performance between the sulfur cathode and the lithium anode for developing all‐solid‐state electrolytes are discussed. In the end, an outlook for future directions to offer reliable electrolyte systems is presented for the development of commercially viable lithium–sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Self-citationDesign principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
A review on the separators of liquid electrolyte Li-ion batteries
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.065 · Cited by 1,671
Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Watanabe, M., Thomas, M. L., Zhang, S., Ueno, K., Yasuda, T., & Dokko, K. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00504 · Cited by 1,667
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Rechargeable Lithium Batteries with Aqueous Electrolytes
Li, W., Dahn, J. R., & Wainwright, D. S. (1994) · Science · doi:10.1126/science.264.5162.1115 · Cited by 1,322
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Self-citationDetection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Derrien, G., Hassoun, J., Panero, S., & Scrosati, B. (2007) · Advanced Materials · doi:10.1002/adma.200700748 · Cited by 868
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Li10SnP2S12: An Affordable Lithium Superionic Conductor
Bron, P., Johansson, S., Zick, K., Schmedt auf der Günne, J., Dehnen, S., & Roling, B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407393y · Cited by 655
Wenzel, S., Leichtweiss, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Crystal structure and ionic conductivity of Li14Zn(GeO4)4 and other new Li+ superionic conductors
Hong, H. Y.-P. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90075-2 · Cited by 553
Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy
Cuisinier, M., Cabelguen, P.-E., Evers, S., He, G., Kolbeck, M., Garsuch, A., Bolin, T., Balasubramanian, M., & Nazar, L. F. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401763d · Cited by 550
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Self-citationZheng, J., Lochala, J. A., Kwok, A., Deng, Z. D., & Xiao, J. (2017) · Advanced Science · doi:10.1002/advs.201700032 · Cited by 524
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Solvate Ionic Liquid Electrolyte for Li–S Batteries
Dokko, K., Tachikawa, N., Yamauchi, K., Tsuchiya, M., Yamazaki, A., Takashima, E., Park, J.-W., Ueno, K., Seki, S., Serizawa, N., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.111308jes · Cited by 507
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte
Yamaki, J.-I., Tobishima, S.-I., Hayashi, K., Saito, K., Nemoto, Y., & Arakawa, M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00067-6 · Cited by 483
Ionic conductivity in Li3N single crystals
Alpen, U. V., Rabenau, A., & Talat, G. H. (1977) · Applied Physics Letters · doi:10.1063/1.89283 · Cited by 437
Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4
Sahu, G., Lin, Z., Li, J., Liu, Z., Dudney, N., & Liang, C. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43357a · Cited by 434
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Crystal structure of a superionic conductor, Li7P3S11
YAMANE, H., SHIBATA, M., SHIMANE, Y., JUNKE, T., SEINO, Y., ADAMS, S., MINAMI, K., HAYASHI, A., & TATSUMISAGO, M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.05.020 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
In Situ STEM-EELS Observation of Nanoscale Interfacial Phenomena in All-Solid-State Batteries
Wang, Z., Santhanagopalan, D., Zhang, W., Wang, F., Xin, H. L., He, K., Li, J., Dudney, N., & Meng, Y. S. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01119 · Cited by 384
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Self-citationLithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Fast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life
Yao, X., Liu, D., Wang, C., Long, P., Peng, G., Hu, Y.-S., Li, H., Chen, L., & Xu, X. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03448 · Cited by 360
Liu, K., Liu, W., Qiu, Y., Kong, B., Sun, Y., Chen, Z., Zhuo, D., Lin, D., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1601978 · Cited by 354
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
Lithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Xu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Self-citationIonic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Kuhn, A., Gerbig, O., Zhu, C., Falkenberg, F., Maier, J., & Lotsch, B. V. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02046d · Cited by 316
Li, W., Sun, X., & Yu, Y. (2017) · Small Methods · doi:10.1002/smtd.201600037 · Cited by 308
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Zhang, J., Yue, L., Kong, Q., Liu, Z., Zhou, X., Zhang, C., Xu, Q., Zhang, B., Ding, G., Qin, B., et al. (2014) · Scientific Reports · doi:10.1038/srep03935 · Cited by 289
3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries
Liu, W., Chen, Z., Zhou, G., Sun, Y., Lee, H. R., Liu, C., Yao, H., Bao, Z., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505299 · Cited by 287
Li‐S Battery Analyzed by UV/Vis in Operando Mode
Patel, M. U. M., Demir‐Cakan, R., Morcrette, M., Tarascon, J., Gaberscek, M., & Dominko, R. (2013) · ChemSusChem · doi:10.1002/cssc.201300142 · Cited by 286
A Solid Sulfur Cathode for Aqueous Batteries
Peramunage, D., & Licht, S. L. (1993) · Science · doi:10.1126/science.261.5124.1029 · Cited by 285
Shuttle phenomenon – The irreversible oxidation mechanism of sulfur active material in Li–S battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.132 · Cited by 285
Tetragonal Li10GeP2S12 and Li7GePS8 – exploring the Li ion dynamics in LGPS Li electrolytes
Kuhn, A., Duppel, V., & Lotsch, B. V. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41728j · Cited by 284
Chung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Alternative strategy for a safe rechargeable battery
Braga, M. H., Grundish, N. S., Murchison, A. J., & Goodenough, J. B. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02888h · Cited by 279
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Nitrogen Dopants in Carbon Nanomaterials: Defects or a New Opportunity?
Lee, W. J., Lim, J., & Kim, S. O. (2017) · Small Methods · doi:10.1002/smtd.201600014 · Cited by 263
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Acacia Senegal–Inspired Bifunctional Binder for Longevity of Lithium–Sulfur Batteries
Li, G., Ling, M., Ye, Y., Li, Z., Guo, J., Yao, Y., Zhu, J., Lin, Z., & Zhang, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500878 · Cited by 250
Fast Solid-State Li Ion Conducting Garnet-Type Structure Metal Oxides for Energy Storage
Thangadurai, V., Pinzaru, D., Narayanan, S., & Baral, A. K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501828v · Cited by 249
Sparingly Solvating Electrolytes for High Energy Density Lithium–Sulfur Batteries
Cheng, L., Curtiss, L. A., Zavadil, K. R., Gewirth, A. A., Shao, Y., & Gallagher, K. G. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00194 · Cited by 246
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
All solid-state battery with sulfur electrode and thio-LISICON electrolyte
Kobayashi, T., Imade, Y., Shishihara, D., Homma, K., Nagao, M., Watanabe, R., Yokoi, T., Yamada, A., Kanno, R., & Tatsumi, T. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.030 · Cited by 235
Miara, L. J., Ong, S. P., Mo, Y., Richards, W. D., Park, Y.-S., Lee, J.-M., Lee, H. S., & Ceder, G. (2013) · Chemistry of Materials · doi:10.1021/cm401232r · Cited by 233
Nonflammable Electrolytes for Li-Ion Batteries Based on a Fluorinated Phosphate
Xu, K., Zhang, S., Allen, J. L., & Jow, T. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1490356 · Cited by 230
Fluorine‐Doped Antiperovskite Electrolyte for All‐Solid‐State Lithium‐Ion Batteries
Li, Y., Zhou, W., Xin, S., Li, S., Zhu, J., Lü, X., Cui, Z., Jia, Q., Zhou, J., Zhao, Y., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604554 · Cited by 227
Tachikawa, N., Yamauchi, K., Takashima, E., Park, J.-W., Dokko, K., & Watanabe, M. (2011) · Chemical Communications · doi:10.1039/c1cc12415c · Cited by 223
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405157 · Cited by 220
Yu, Z., Shang, S., Seo, J., Wang, D., Luo, X., Huang, Q., Chen, S., Lu, J. B., Li, X., Liu, Z., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605561 · Cited by 220
Yamada, T., Ito, S., Omoda, R., Watanabe, T., Aihara, Y., Agostini, M., Ulissi, U., Hassoun, J., & Scrosati, B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441504jes · Cited by 217
Xu, R.-C., Xia, X.-H., Wang, X.-L., Xia, Y., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10142a · Cited by 207
Lithium anode for lithium-air secondary batteries
Imanishi, N., Hasegawa, S., Zhang, T., Hirano, A., Takeda, Y., & Yamamoto, O. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.07.080 · Cited by 206
Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive Microspheres
Baginska, M., Blaiszik, B. J., Merriman, R. J., Sottos, N. R., Moore, J. S., & White, S. R. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100683 · Cited by 205
Empowering the Lithium Metal Battery through a Silicon-Based Superionic Conductor
Whiteley, J. M., Woo, J. H., Hu, E., Nam, K.-W., & Lee, S.-H. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0501412jes · Cited by 191
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries
Xu, R., Belharouak, I., Li, J. C. M., Zhang, X., Bloom, I., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200990 · Cited by 184
Waluś, S., Barchasz, C., Bouchet, R., Leprêtre, J., Colin, J., Martin, J., Elkaïm, E., Baehtz, C., & Alloin, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500165 · Cited by 184
Yu, M., Ma, J., Xie, M., Song, H., Tian, F., Xu, S., Zhou, Y., Li, B., Wu, D., Qiu, H., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602347 · Cited by 180
Dielectric Modification of 5V‐Class Cathodes for High‐Voltage All‐Solid‐State Lithium Batteries
Yada, C., Ohmori, A., Ide, K., Yamasaki, H., Kato, T., Saito, T., Sagane, F., & Iriyama, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301416 · Cited by 177
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Methods and Protocols for Electrochemical Energy Storage Materials Research
Talaie, E., Bonnick, P., Sun, X., Pang, Q., Liang, X., & Nazar, L. F. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02726 · Cited by 175
Graphene–Li2S–Carbon Nanocomposite for Lithium–Sulfur Batteries
Wu, F., Lee, J. T., Zhao, E., Zhang, B., & Yushin, G. (2016) · ACS Nano · doi:10.1021/acsnano.5b06716 · Cited by 167
High-Performance All-Inorganic Solid-State Sodium–Sulfur Battery
Yue, J., Han, F., Fan, X., Zhu, X., Ma, Z., Yang, J. H., & Wang, C. (2017) · ACS Nano · doi:10.1021/acsnano.7b01445 · Cited by 167
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Jia, W., Fan, C., Wang, L., Wang, Q., Zhao, M., Zhou, A., & Li, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03897 · Cited by 150
Enhancing Cation Diffusion and Suppressing Anion Diffusion via Lewis-Acidic Polymer Electrolytes
Savoie, B. M., Webb, M. A., & Miller, T. F. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02662 · Cited by 148
Chen, J., Henderson, W. A., Pan, H., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00417 · Cited by 147
Atomically Thin Transition‐Metal Dichalcogenides for Electrocatalysis and Energy Storage
Duan, X., Xu, J., Wei, Z., Ma, J., Guo, S., Liu, H., & Dou, S. X. (2017) · Small Methods · doi:10.1002/smtd.201700156 · Cited by 123
Leaf‐Like Graphene‐Oxide‐Wrapped Sulfur for High‐Performance Lithium–Sulfur Battery
Yuan, S., Guo, Z., Wang, L., Hu, S., Wang, Y., & Xia, Y. (2015) · Advanced Science · doi:10.1002/advs.201500071 · Cited by 120
Cañas, N. A., Fronczek, D. N., Wagner, N., Latz, A., & Friedrich, K. A. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5013208 · Cited by 120
Lu, D., Tao, J., Yan, P., Henderson, W. A., Li, Q., Shao, Y., Helm, M. L., Borodin, O. A., Graff, G. L., Polzin, B. J., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04766 · Cited by 118
Liu, J., Qian, T., Wang, M., Liu, X., Xu, N., You, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02332 · Cited by 118
Self-citationNMR, DSC and high pressure electrical conductivity studies of liquid and hybrid electrolytes
Stallworth, P. E., FONTANELLA, J. J., Wintersgill, M. C., Scheidler, C. D., Immel, J. J., Greenbaum, S., & Góźdź, A. S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00144-5 · Cited by 116
Novel Methods for Sodium‐Ion Battery Materials
Zhao, C., Lu, Y., Li, Y., Jiang, L., Rong, X., Hu, Y., Li, H., & Chen, L. (2017) · Small Methods · doi:10.1002/smtd.201600063 · Cited by 114
Why PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Temperature-sensitive cathode materials for safer lithium-ion batteries
Xia, L., Li, S., Ai, X., Yang, H., & Cao, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00590h · Cited by 107
A phase-field model for electrode reactions with Butler–Volmer kinetics
Okajima, Y., Shibuta, Y., & Suzuki, T. (2010) · Computational Materials Science · doi:10.1016/j.commatsci.2010.07.015 · Cited by 91
Wang, T., Kretschmer, K., Choi, S., Pang, H., Xue, H., & Wang, G. (2017) · Small Methods · doi:10.1002/smtd.201700089 · Cited by 87
Berkes, B. B., Jozwiuk, A., Sommer, H., Brezesinski, T., & Janek, J. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.08.002 · Cited by 80
Park, H., Lim, H., Lim, H., Seong, W. M., Moon, S., Ko, Y., Lee, B., Bae, Y., Kim, H., & Kang, K. (2017) · Nature Communications · doi:10.1038/ncomms14989 · Cited by 63
Practical Challenges in Employing Graphene for Lithium-Ion Batteries and Beyond
Lochala, J. A., Zhang, H., Wang, Y., Okolo, O., Li, X., & Xiao, J. (2017) · Small Methods · doi:10.1002/smtd.201700099 · Cited by 43
Jiao, Y., Chen, W., Lei, T., Dai, L., Chen, B., Wu, C., & Xiong, J. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-1948-5 · Cited by 37
Self-citationMetasurface Reconfiguration through Lithium‐Ion Intercalation in a Transition Metal Oxide
Zanotto, S., Blancato, A., Buchheit, A., Castro, M., Wiemhöfer, H., Morichetti, F., & Melloni, A. I. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600732 · Cited by 29
Cited by
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Metadata
- Authors
- Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., Liu, X., Xiong, J., & Yan, C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-01-17
- Volume
- 8
- Issue
- 10
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2793740354
- Cited by
- 356
- References
- 143
- FWCI
- 19.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.