The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
An overview of residual stresses in metal powder bed fusion
Abstract
Abstract Metal additive manufacturing (AM) has garnered tremendous research and industrial interest in recent years; in the field, powder bed fusion (PBF) processing is the most common technique, with selective laser melting (SLM) dominating the landscape followed by electron beam melting (EBM). Through continued process improvements, these methods are now often capable of producing high strength parts with static strengths exceeding their conventionally manufactured counterparts. However, PBF processing also results in large and anisotropic residual stresses (RS) that can severely affect fatigue properties and result in geometric distortion. The dependence of RS formation on processing variables, material properties and part geometry has made it difficult to predict efficiently and has hindered widespread acceptance of AM techniques. Substantial investigations have been conducted with regards to RS in PBF processing, which have illuminated a number of important relationships, yet a review encompassing this information has not been available. In this review, we survey and assemble the knowledge existing in the literature regarding RS in PBF processes. A discussion of background mechanics for RS development in AM is provided along with methods of measurement, highlighting the anisotropic nature of the stress fields. We then review modeling efforts and in-process experimental measurements made to advance process understanding, followed by a thorough analysis and summary of the known relationships of both material properties and processing variables to resulting RS. The current state of knowledge and future research needs for the field are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The determination of the elastic field of an ellipsoidal inclusion, and related problems
Eshelby, J. D. (1957) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1957.0133 · Cited by 13,026
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
(1962) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(62)91145-6 · Cited by 4,391
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Residual Stress: Measurement by Diffraction and Interpretation
Noyan, I. C., & Cohen, J. B. (1987) · Medical Entomology and Zoology · Cited by 2,122
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Residual stress. Part 1 – Measurement techniques
Withers, P. J., & Bhadeshia, H. K. D. H. (2001) · Materials Science and Technology · doi:10.1179/026708301101509980 · Cited by 1,620
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Residual stress and its role in failure
Withers, P. J. (2007) · Reports on Progress in Physics · doi:10.1088/0034-4885/70/12/r04 · Cited by 730
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Hussein, A., Hao, L., Yan, C., & Everson, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.070 · Cited by 706
Ding, J., Colegrove, P., Mehnen, J., Ganguly, S., Sequeira Almeida, P. M., Wang, F., & Williams, S. (2011) · Computational Materials Science · doi:10.1016/j.commatsci.2011.06.023 · Cited by 689
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Investigations on residual stresses and deformations in selective laser melting
Zaeh, M. F., & Branner, G. (2010) · Production Engineering · doi:10.1007/s11740-009-0192-y · Cited by 666
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Sethuraman, V. A., Chon, M. J., Shimshak, M., Srinivasan, V., & Guduru, P. R. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.013 · Cited by 626
Additive manufacturing: rapid prototyping comes of age
Campbell, I., Bourell, D., & Gibson, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231563 · Cited by 623
Torres, M. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(01)00205-5 · Cited by 613
Lu, Y., Wu, S., Gan, Y., Huang, T., Yang, C., Junjie, L., & Lin, J. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.07.009 · Cited by 600
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 573
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Kruth, J.-P., Deckers, J., Yasa, E., & Wauthlé, R. (2012) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405412437085 · Cited by 532
Denlinger, E. R., Heigel, J. C., Michaleris, P., & Palmer, T. A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.030 · Cited by 531
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
Michaleris, P. (2014) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2014.04.003 · Cited by 527
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
Yadroitsev, I., Krakhmalev, P., & Yadroitsava, I. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.183 · Cited by 515
Highly Anisotropic Steel Processed by Selective Laser Melting
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-013-9875-z · Cited by 506
Stress and deformation evaluations of scanning strategy effect in selective laser melting
Cheng, B., Shrestha, S., & Chou, K. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.007 · Cited by 504
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000702 · Cited by 410
Loh, L.-E., Chua, C.-K., Yeong, W.-Y., Song, J., Mapar, M., Sing, S.-L., Liu, Z.-H., & Zhang, D.-Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.014 · Cited by 408
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Schmidtke, K., Palm, F., Hawkins, A., & Emmelmann, C. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.047 · Cited by 389
Zhang, B., Dembinski, L., & Coddet, C. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.06.055 · Cited by 370
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
Bauereiß, A., Scharowsky, T., & Körner, C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.002 · Cited by 351
Yadroitsev, I., & Yadroitsava, I. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1026045 · Cited by 349
3D FE simulation for temperature evolution in the selective laser sintering process
Kolossov, S., Boillat, É., Glardon, R., Fischer, P., & Locher, M. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.10.019 · Cited by 338
Palanivel, S., Nelaturu, P., Glass, B., & Mishra, R. S. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.082 · Cited by 336
Matsumoto, M., Shiomi, M., Osakada, K., & Abe, F. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00093-1 · Cited by 307
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Kolbus, L. M., Payzant, E. A., Cornwell, P., Watkins, T. R., Babu, S. S., Dehoff, R., Lorenz, M., Ovchinnikova, O. S., & Duty, C. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2722-2 · Cited by 302
Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
Wysocki, B., Maj, P., Sitek, R., Buhagiar, J., Kurzydłowski, K., & Święszkowski, W. (2017) · Applied Sciences · doi:10.3390/app7070657 · Cited by 300
The Influence of Processing Parameters on the Mechanical Properties of SLM Parts
Hanzl, P., Zetek, M., Bakša, T., & Kroupa, T. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.01.510 · Cited by 291
Review on powder-based electron beam additive manufacturing technology
Gong, X., Anderson, T., & Chou, K. (2014) · Manufacturing Review · doi:10.1051/mfreview/2014001 · Cited by 290
Vrancken, B., Cain, V., Knutsen, R. D., & Humbeeck, J. V. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.05.016 · Cited by 277
Luo, Z., & Zhao, Y. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.022 · Cited by 267
Effect of stress relaxation on distortion in additive manufacturing process modeling
Denlinger, E. R., & Michaleris, P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.011 · Cited by 266
Automated Process Monitoring in 3D Printing Using Supervised Machine Learning
Delli, U., & Chang, S. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.111 · Cited by 265
Modelling and simulation of electron beam melting
Zäh, M. F., & Lutzmann, S. (2010) · Production Engineering · doi:10.1007/s11740-009-0197-6 · Cited by 263
Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting
Cheng, B., Shrestha, S., & Chou, Y. K. (2016) · Volume 3: Joint MSEC-NAMRC Symposia · doi:10.1115/msec2016-8819 · Cited by 250
Yang, Q., Zhang, P., Cheng, L., Min, Z., Chyu, M., & To, A. C. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.012 · Cited by 242
Mitigation of thermal distortion during additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., & DebRoy, T. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.001 · Cited by 241
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F., & Ebert, M.-C. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.097 · Cited by 226
Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling
Vastola, G., Zhang, G., Pei, Q. X., & Zhang, Y.-W. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.010 · Cited by 226
Yadroitsev, I., Yadroitsava, I., Bertrand, P., & Smurov, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211218117 · Cited by 221
Robinson, J., Ashton, I., Fox, P., Jones, E., & Sutcliffe, C. J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.001 · Cited by 219
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.816-817.134 · Cited by 215
Experimental studies on selective laser melting of metallic parts
Meier, H., & Haberland, C. (2008) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200800327 · Cited by 213
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Dunbar, A. J., Denlinger, E. R., Heigel, J. C., Michaleris, P., Guerrier, P. K., Martukanitz, R. P., & Simpson, T. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.04.007 · Cited by 200
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Kanko, J. A., Sibley, A. P., & Fraser, J. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.12.024 · Cited by 197
Darvish, K., Chen, Z. W., & Pasang, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.086 · Cited by 193
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Residual stress-induced warping in direct metal solid freeform fabrication
Klingbeil, N., Beuth, J., Chin, R., & Amon, C. H. (2002) · International Journal of Mechanical Sciences · doi:10.1016/s0020-7403(01)00084-4 · Cited by 186
Prabhakar, P., Sames, W. J., Dehoff, R., & Babu, S. S. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.03.003 · Cited by 185
Machine learning in tolerancing for additive manufacturing
Zhu, Z., Anwer, N., Huang, Q., & Mathieu, L. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.119 · Cited by 184
Baturynska, I., Semeniuta, O., & Martinsen, K. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.12.204 · Cited by 182
Vora, P., Mumtaz, K., Todd, I., & Hopkinson, N. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.003 · Cited by 173
Friction Stir Additive Manufacturing: Route to High Structural Performance
Palanivel, S., Sidhar, H., & Mishra, R. S. (2015) · JOM · doi:10.1007/s11837-014-1271-x · Cited by 171
Ahmad, B., van der Veen, S. O., Fitzpatrick, M. E., & Guo, H. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.002 · Cited by 166
Tang, H., Yang, G. Y., Jia, W., He, W., Lu, S., & Qian, M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.03.079 · Cited by 164
Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
Raplee, J., Plotkowski, A., Kirka, M. M., Dinwiddie, R., Okello, A., Dehoff, R. R., & Babu, S. S. (2017) · Scientific Reports · doi:10.1038/srep43554 · Cited by 163
Machine‐Learning‐Based Monitoring of Laser Powder Bed Fusion
Yuan, B., Guss, G. M., Wilson, A. C., Hau‐Riege, S. P., DePond, P. J., McMains, S., Matthews, M. J., & Giera, B. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800136 · Cited by 161
Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening
Kalentics, N., Boillat, É., Peyre, P., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.05.008 · Cited by 157
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
Islam, M. D. S., Purtonen, T., Piili, H., Salminen, A., & Nyrhilä, O. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.156 · Cited by 156
A hybrid machine learning approach for additive manufacturing design feature recommendation
Yao, X., Moon, S. K., & Bi, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0041 · Cited by 156
Khanzadeh, M., Rao, P., Jafari-Marandi, R., Smith, B. K., Tschopp, M. A., & Bian, L. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038598 · Cited by 156
Layerwise Monitoring of the Selective Laser Melting Process by Thermography
Krauss, H., Zeugner, T., & Zaeh, M. F. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.097 · Cited by 136
Rodriguez, E., Mireles, J., Terrazas, C. A., Espalin, D., Perez, M. A., & Wicker, R. B. (2015) · Additive manufacturing · doi:10.1016/j.addma.2014.12.001 · Cited by 136
A pragmatic part scale model for residual stress and distortion prediction in powder bed fusion
Williams, R. J., Davies, C. M., & Hooper, P. A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.038 · Cited by 132
Investigation of Residual Stresses Induced during the Selective Laser Melting Process
Belle, L. V., Vansteenkiste, G., & Boyer, J. C. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.554-557.1828 · Cited by 130
Bi, G., Sun, C., & Gasser, A. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.10.006 · Cited by 126
The origins for tensile properties of selective laser melted aluminium alloy A357
Rao, J. H., Zhang, Y., Fang, X., Chen, Y., Wu, X., & Davies, C. H. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.007 · Cited by 123
3D Finite Element Analysis in the selective laser melting process
Contuzzi, N., Campanelli, S. L., & Ludovico, A. D. (2011) · International Journal of Simulation Modelling · doi:10.2507/ijsimm10(3)1.169 · Cited by 118
Dinwiddie, R. B., Dehoff, R., Lloyd, P. D., Lowe, L. E., & Ulrich, J. B. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2018412 · Cited by 112
Gong, H., Rafi, K., Starr, T. L., & Stucker, B. E. (2013) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15565 · Cited by 91
Parameters in selective laser melting for processing metallic powders
Kurzynowski, T., Chlebus, E., Kuźnicka, B., et al. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.907292 · Cited by 86
Liang, Y.-J., Liu, D., & Wang, H. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.11.002 · Cited by 85
Selective laser melting process monitoring with high speed infra-red camera and pyrometer
Bayle, F., & Doubenskaia, M. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.786940 · Cited by 81
Ultrasonic online monitoring of additive manufacturing processes based on selective laser melting
Rieder, H., Dillhöfer, A., Spies, M., Bamberg, J., & Hess, T. (2015) · AIP conference proceedings · doi:10.1063/1.4914609 · Cited by 77
Residual Stress in SLM Ti6Al4V Alloy Specimens
Yadroitsava, I., Grewar, S., Hattingh, D. G., & Yadroitsev, I. A. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.828-829.305 · Cited by 75
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Self-citation
Metadata
- Authors
- Bartlett, J. L., & Li, X.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 27
- Pages
- 131-149
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2919666920
- Cited by
- 616
- References
- 133
- FWCI
- 38.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.