The DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Bioinks and bioprinting: A focused review
Abstract
Abstract Bioprinting is a process based on additive manufacturing that uses biomaterials as the microenvironment for living cells. These materials often referred to as bioinks, are based on cytocompatible hydrogel precursors, which gel in a manner compatible with different bioprinting approaches. Hydrogels are highly hydrated three-dimensional (3D) networks of cross-linked hydrophilic polymer chains and have been widely explored for use as bioactive delivery agents, cell carriers, consumer products, tissue engineering scaffolds and for wound healing. Hydrogels can be tailored for different chemical, electrical, mechanical, and thermal properties and can even be made to conduct electricity. Recent trends in bioink development have focused on incorporating carbon-based nanomaterials, clay nanomaterials, ceramics, fibers, and growth factors to create hybrid and multi-composite hydrogels. The goal of this review paper is to examine the synergies resulting from the combination of these materials. This review will feature recent advances in this field, focusing on bioink developments and bioprinting applications, and the use of natural and synthetic additives that impart unique, novel, or critical functionalities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in the science and technology of carbon nanotubes and their composites: a review
Thostenson, E. T., Ren, Z., & Chou, T.-W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00094-x · Cited by 5,005
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Brunsveld, L., Folmer, B. J. B., Meijer, E. W., & Sijbesma, R. P. (2001) · Chemical Reviews · doi:10.1021/cr990125q · Cited by 3,006
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Mechanically Strong, Electrically Conductive, and Biocompatible Graphene Paper
Chen, H., Müller, M. B., Gilmore, K. J., Wallace, G. G., & Li, D. (2008) · Advanced Materials · doi:10.1002/adma.200800757 · Cited by 2,040
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
Chitosan: A versatile biopolymer for orthopaedic tissue-engineering
Di Martino, A., Sittinger, M., & Risbud, M. V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.016 · Cited by 1,634
Alginate derivatization: A review of chemistry, properties and applications
Pawar, S. N., & Edgar, K. J. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.007 · Cited by 1,627
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Mohan, V. B., Lau, K.-T., Hui, D., & Bhattacharyya, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.01.013 · Cited by 1,061
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
Hydrogels in a historical perspective: From simple networks to smart materials
Buwalda, S. J., Boere, K. W. M., Dijkstra, P. J., Feijen, J., Vermonden, T., & Hennink, W. E. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.03.052 · Cited by 994
Thoniyot, P., Tan, M. J., Karim, A. A., Young, D. J., & Loh, X. J. (2015) · Advanced Science · doi:10.1002/advs.201400010 · Cited by 928
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Gómez-Guillén, M. C., Turnay, J., Fernández-Dı́az, M. D., Ulmo, N., Lizarbe, M. A., & Montero, P. (2002) · Food Hydrocolloids · doi:10.1016/s0268-005x(01)00035-2 · Cited by 847
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
A review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Graphene-based materials for tissue engineering
Shin, S. R., Li, Y.-C., Jang, H. L., Khoshakhlagh, P., Akbari, M., Nasajpour, A., Zhang, Y. S., Tamayol, A., & Khademhosseini, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.007 · Cited by 721
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Natural polymers for the microencapsulation of cells
Gasperini, L., Mano, J. F., & Reis, R. L. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0817 · Cited by 602
Cross-linked hyaluronic acid hydrogel films: new biomaterials for drug delivery
Luo, Y., Kirker, K. R., & Prestwich, G. D. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00300-x · Cited by 596
Self-citationThe dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Tissue engineering by self-assembly and bio-printing of living cells
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., & Forgacs, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 593
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Processing and properties of advanced porous ceramics: An application based review
Hammel, E. C., Ighodaro, O. L.-R., & Okoli, O. I. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.06.095 · Cited by 563
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Cell patterning technologies for organotypic tissue fabrication
Guillotin, B., & Guillemot, F. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2010.12.008 · Cited by 428
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
3D Printing of Living Responsive Materials and Devices
Liu, X., Yuk, H., Lin, S., Parada, G. A., Tang, T., Tham, E., de la Fuente‐Nunez, C., Lu, T. K., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704821 · Cited by 393
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
A bioprintable form of chitosan hydrogel for bone tissue engineering
Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 376
Clay/polymer composites: the story
Gao, F. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00509-7 · Cited by 365
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347
Synthesis and Characterization of Hybrid Hyaluronic Acid-Gelatin Hydrogels
Camci-Unal, G., Cuttica, D., Annabi, N., Demarchi, D., & Khademhosseini, A. (2013) · Biomacromolecules · doi:10.1021/bm3019856 · Cited by 343
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00196 · Cited by 293
Zhao, B., Hu, H., Mandal, S. K., & Haddon, R. C. (2005) · Chemistry of Materials · doi:10.1021/cm0500399 · Cited by 290
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Yu, Y., Moncal, K. K., Li, J., Peng, W., Rivero, I., Martin, J. A., & Ozbolat, I. T. (2016) · Scientific Reports · doi:10.1038/srep28714 · Cited by 269
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Biomedical applications of cationic clay minerals
Ghadiri, M., Chrzanowski, W., & Rohanizadeh, R. (2015) · RSC Advances · doi:10.1039/c4ra16945j · Cited by 259
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 243
Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Rodriguez, M. J., Brown, J., Giordano, J., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 220
Rowe, S. L., Lee, S., & Stegemann, J. P. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.08.006 · Cited by 217
Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications
Kumar, S., Sarita, Nehra, M., Dilbaghi, N., Tankeshwar, K., & Kim, K.-H. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.001 · Cited by 215
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C., Aho, M., Zile, M., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 211
Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks
Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503921 · Cited by 209
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
De Mori, A., Peña Fernández, M., Blunn, G., Tozzi, G., & Roldo, M. (2018) · Polymers · doi:10.3390/polym10030285 · Cited by 206
Tarafder, S., & Bose, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501048n · Cited by 204
A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
Patra, S., & Young, V. (2016) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-016-0730-0 · Cited by 202
Three-Dimensional Printing of Nanomaterial Scaffolds for Complex Tissue Regeneration
O'Brien, C. M., Holmes, B., Faucett, S., & Zhang, L. G. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0168 · Cited by 201
Silk‐Based Bioinks for 3D Bioprinting
Chawla, S., Midha, S., Sharma, A., & Ghosh, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701204 · Cited by 200
3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Ho, C. M. B., Mishra, A., Lin, P. T. P., Ng, S. H., Yeong, W. Y., Kim, Y., & Yoon, Y. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600250 · Cited by 192
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 188
Zhou, X., Nowicki, M., Cui, H., Zhu, W., Fang, X., Miao, S., Lee, S.-J., Keidar, M., & Zhang, L. G. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.049 · Cited by 182
Gurkan, U. A., El Assal, R., Yildiz, S. E., Sung, Y., Trachtenberg, A. J., Kuo, W. P., & Demirci, U. (2014) · Molecular Pharmaceutics · doi:10.1021/mp400573g · Cited by 178
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Recombinant DNA production of spider silk proteins
Tokareva, O., Michalczechen‐Lacerda, V. A., Rech, E. L., & Kaplan, D. L. (2013) · Microbial Biotechnology · doi:10.1111/1751-7915.12081 · Cited by 169
Bone matrix production in hydroxyapatite-modified hydrogels suitable for bone bioprinting
Wenz, A., Borchers, K., Tovar, G. E. M., & Kluger, P. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa91ec · Cited by 162
State of the art composites comprising electrospun fibres coupled with hydrogels: a review
Bosworth, L. A., Turner, L.-A., & Cartmell, S. H. (2013) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2012.10.008 · Cited by 159
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Designing Scaffolds to Enhance Transplanted Myoblast Survival and Migration
Hill, E. E., Boontheekul, T., & Mooney, D. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1295 · Cited by 144
Wu, S., Liu, X., Hu, T., Chu, P. K.-H., Ho, J., Chan, Y., Yeung, K., Chu, C. L., Hung, T., Huo, K., et al. (2008) · Nano Letters · doi:10.1021/nl802145n · Cited by 144
Insights into carbon nanotube and graphene formation mechanisms from molecular simulations: a review
Page, A. J., Ding, F., Irle, S., & Morokuma, K. (2015) · Reports on Progress in Physics · doi:10.1088/0034-4885/78/3/036501 · Cited by 141
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Embedded Multimaterial Extrusion Bioprinting
Rocca, M., Fragasso, A., Liu, W. H., Heinrich, M. A., & Zhang, Y. S. (2017) · SLAS TECHNOLOGY · doi:10.1177/2472630317742071 · Cited by 141
Raza, F., Zafar, H., Zhu, Y., Ren, Y., Ullah, A., Khan, A., He, X., Han, H., Aquib, M., Boakye‐Yiadom, K. O., et al. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10010016 · Cited by 140
Intelligent rapid prototyping with fused deposition modelling
Masood, S. H. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610109054 · Cited by 139
Temperature and pH responsive 3D printed scaffolds
Dutta, S., & Cohn, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02368e · Cited by 135
England, S., Rajaram, A., Schreyer, D. J., & Chen, D. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.12.001 · Cited by 133
3D cell bioprinting of self-assembling peptide-based hydrogels
Raphael, B., Khalil, T., Workman, V. L., Smith, A. M., Brown, C., Streuli, C. H., Saiani, A., & Domingos, M. A. N. (2017) · Materials Letters · doi:10.1016/j.matlet.2016.12.127 · Cited by 133
Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing
Dávila, J. L., de Freitas, M. S., Neto, P. I., Silveira, Z. D. C., da Silva, J. V. L., & d’Ávila, M. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43031 · Cited by 130
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
Progress of gelatin-based 3D approaches for bone regeneration
Echave, M. C., Sánchez, P., Pedraz, J. L., & Orive, G. (2017) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2017.04.012 · Cited by 123
Kosik‐Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90d7 · Cited by 118
Coradini, D., Pellizzaro, C., Miglierini, G., Daidone, M. G., & Perbellini, A. (1999) · International Journal of Cancer · doi:10.1002/(sici)1097-0215(19990505)81:3<411::aid-ijc15>3.0.co;2-f · Cited by 114
Gelatin methacrylamide hydrogel with graphene nanoplatelets for neural cell-laden 3D bioprinting
Zhu, W., Harris, B. T., & Zhang, L. G. (2016) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2016.7591649 · Cited by 114
A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink
Lorson, T., Jaksch, S., Lübtow, M. M., Jüngst, T., Gröll, J., Lühmann, T. C., & Luxenhofer, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00481 · Cited by 114
Highly defined 3D printed chitosan scaffolds featuring improved cell growth
Elviri, L., Foresti, R., Bergonzi, C., Zimetti, F., Marchi, C., Bianchera, A., Bernini, F., Silvestri, M., & Bettini, R. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa7692 · Cited by 111
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 110
3D freeform printing of silk fibroin
Rodríguez, M. J., Dixon, T. A., Cohen, E., Huang, W., Omenetto, F. G., & Kaplan, D. L. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.035 · Cited by 110
3D printing of responsive hydrogels for drug-delivery systems
Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 108
3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines
Bella, C. D., Fosang, A., Donati, D. M., Wallace, G. G., & Choong, P. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00039 · Cited by 107
Microfabrication of scaffold-free tissue strands for three-dimensional tissue engineering
Akkouch, A., Yu, Y., & Ozbolat, I. T. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/031002 · Cited by 107
Polyol-Silk Bioink Formulations as Two-Part Room-Temperature Curable Materials for 3D Printing
Jose, R. R., Brown, J. E., Polido, K. E., Omenetto, F. G., & Kaplan, D. L. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00160 · Cited by 106
Cheng, Y., & Chen, F. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.07.025 · Cited by 105
3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700058 · Cited by 103
Advances in 3D Bioprinting for Neural Tissue Engineering
Lee, S., Esworthy, T. J., Stake, S., Miao, S., Zuo, Y. Y., Harris, B. T., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201700213 · Cited by 99
3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks
Luo, Y., Luo, G., Gelinsky, M., Huang, P., & Ruan, C. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.12.009 · Cited by 95
Self-citationBiodegradable Polymers and Stem Cells for Bioprinting
Lei, M., & Wang, X. (2016) · Molecules · doi:10.3390/molecules21050539 · Cited by 84
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
Anisotropy of graphene scaffolds assembled by three-dimensional printing
Huang, K., Yang, J., Dong, S., Feng, Q., Zhang, X., Ding, Y., & Hu, J. (2018) · Carbon · doi:10.1016/j.carbon.2017.12.120 · Cited by 82
3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering
Cochis, A., Bonetti, L., Sorrentino, R., Negrini, N. C., Grassi, F. A., Leigheb, M., Rimondini, L., & Farè, S. (2018) · Materials · doi:10.3390/ma11040579 · Cited by 82
Study of gelatin as an effective energy absorbing layer for laser bioprinting
Xiong, R., Zhang, Z., Chai, W., Chrisey, D. B., & Huang, Y. H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa74f2 · Cited by 77
Porous Stimuli-Responsive Self-Folding Electrospun Mats for 4D Biofabrication
Apsite, I., Stoychev, G. V., Zhang, W., Jehnichen, D., Xie, J., & Ionov, L. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00829 · Cited by 73
Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications
Loo, Y., & Hauser, C. A. E. (2015) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014103 · Cited by 72
Novel 3D printed alginate–BFP1 hybrid scaffolds for enhanced bone regeneration
Heo, E. Y., Ko, N. R., Bae, M. S., Lee, S. J., Choi, B., Kim, J. H., Kim, H. K., Park, S. A., & Kwon, I. K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.09.003 · Cited by 69
A cell-printing approach for obtaining hASC-laden scaffolds by using a collagen/polyphenol bioink
Yeo, M. G., & Kim, G. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6997 · Cited by 68
Rutz, A. L., Lewis, P. L., & Shah, R. N. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.162 · Cited by 66
Wang, Y., Wu, S., Kuss, M. A., Streubel, P. N., & Duan, B. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00101 · Cited by 64
Abrahams, P. W. (2011) · Applied Geochemistry · doi:10.1016/j.apgeochem.2011.05.003 · Cited by 62
Hybrid 3D printing and electrodeposition approach for controllable 3D alginate hydrogel formation
Shang, W., Liu, Y., Wan, W., Hu, C., Liu, Z., Wong, C. T., Fukuda, T., & Shen, Y. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6ed8 · Cited by 59
Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes
Do, A., Akkouch, A., Green, B. J., Ozbolat, I. T., Debabneh, A., Geary, S. M., & Salem, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1648-9 · Cited by 58
(2017) · CRC Press eBooks · doi:10.1201/9781315371795 · Cited by 55
Visible light-based stereolithography bioprinting of cell-adhesive gelatin hydrogels
Wang, Z., Tian, Z., Jin, X., Holzman, J. F., Ménard, F., & Kim, K. (2017) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2017.8037144 · Cited by 51
Mechanical properties of nanocomposites reinforced by carbon nanotube sponges
Zhao, W., Li, T., Li, Y., O’Brien, D. J., Terrones, M., Wei, B., Suhr, J., & Lu, X. L. (2018) · Journal of Materiomics · doi:10.1016/j.jmat.2018.01.006 · Cited by 50
Hydroxyapatite-modified gelatin bioinks for bone bioprinting
Wenz, A., Janke, K., Hoch, E., Tovar, G. E. M., Borchers, K., & Kluger, P. J. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0018 · Cited by 48
High-strength silk fibroin scaffolds with anisotropic mechanical properties
Yetiskin, B., & Okay, O. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.079 · Cited by 48
Fedorovich, N. E., de Wijn, J. R., Verbout, A. J., et al. (2008) · Tissue Engineering · doi:10.1089/ten.2007.0158 · Cited by 48
Hakam, M. S., Imani, R., Abolfathi, N., Fakhrzadeh, H., & Sharifi, A. M. (2017) · Bio-Medical Materials and Engineering · doi:10.3233/bme-161617 · Cited by 46
Carles-Carner, M., Saleh, L. S., & Bryant, S. J. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aabb31 · Cited by 46
Biomedical Applications of Hyaluronic Acid
Falcone, S. J., Palmeri, D. M., & Berg, R. A. (2006) · ACS symposium series · doi:10.1021/bk-2006-0934.ch008 · Cited by 42
Shen, C., Zhao, Y., Liu, H., Jiang, Y., Li, H., Lan, S., Bao, H., Yang, B. J., & Lin, Q. (2018) · Polymer Chemistry · doi:10.1039/c8py00165k · Cited by 28
Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs
Khani, N., Nadernezhad, A., Bártolo, P., & Koç, B. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.132 · Cited by 23
Thiol‐ene Cross‐Linkable Hydrogels as Bioinks for Biofabrication
Stichler, S., Bertlein, S., Teßmar, J., Jüngst, T., & Gröll, J. (2017) · Macromolecular Symposia · doi:10.1002/masy.201600173 · Cited by 21
Cited by
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Bisht, B., Begum, J. P. S., Dmitriev, A. A., Kurbatova, A., Singh, N., Nishinari, K., Nanda, M., Kumar, S., Vlaskin, M. S., & Kumar, V. (2024) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2024.104471 · Cited by 40
Tan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00313 · Cited by 36
Silk based bio-inks for medical applications
Anant Deshpande, V., Antanitta. S, V., Kore, A., & Kandasubramanian, B. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112255 · Cited by 23
Recreating Human Skin In Vitro: Should the Microbiota Be Taken into Account?
Galvan, A., Pellicciari, C., & Calderan, L. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25021165 · Cited by 11
Metadata
- Authors
- Mobaraki, M., Ghaffari, M., Yazdanpanah, A., Luo, Y., & Mills, D. K.
- Venue
- Bioprinting
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 18
- Pages
- e00080
- ISSN
- 2405-8866 (ISSN-L)
- OpenAlex
- W3006237901
- Cited by
- 258
- References
- 163
- FWCI
- 10.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.