The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
3D printed functional cookies fortified with Arthrospira platensis: Evaluation of its antioxidant potential and physical-chemical characterization
Open accessAbstract
In the last few decades, consumers' growing attention to the close relationship between health and nutrition is emerging as a new trend, mostly regarding the incorporation of natural ingredients into food. Among those ingredients, microalgae are considered as innovative and promising compounds, rich in valuable nutrients and bioactive molecules. In the present work, 3D printed cookies were fortified with the microalga Arthrospira platensis aiming at developing a new functional food with antioxidant properties. A. platensis antioxidants were recovered using ultrasound-assisted extraction in hydroalcoholic solutions. Ethanol/water and biomass/solvent ratios were optimised through a Design of Experiments (DOE) approach, using the antioxidant activity (ORAC and ABTS) and total phenolic content (TPC) as response variables. The highest ORAC, ABTS and TPC values were observed in the extract obtained with 0% ethanol and 2.0% biomass; thus, this extract was chosen to be incorporated into a printable cookie dough. Three different incorporation approaches were followed: (1) dried biomass, (2) freeze-dried antioxidant extract and (3) antioxidant extract encapsulated into alginate microbeads to enhance the stability to heat, light, and oxygen during baking and further storage. All dough formulations presented shape fidelity with the 3D model. The cookies had aw values low enough to be microbiologically stable, and the texture remained constant after 30 days of storage. Moreover, the extract encapsulation promoted an improvement in the ORAC value and colour stability when compared to all other formulations, revealing the potential of A. platensis for the development of a functional 3D food-ink.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Spirulina – From growth to nutritional product: A review
Soni, R. A., Sudhakar, K., & Rana, R. S. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.09.010 · Cited by 528
Innovative natural functional ingredients from microalgae
Plaza, M., Herrero, M., Cifuentes, A., & Ibáñez, E. (2009) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf901070g · Cited by 509 · cited 1×
“…reported pharmacological properties; including anticancer, antidiabetes, hepatoprotective and anti-inflammatory (Czerwonka et al., 2018; Da Silva, Fernandes, Barros, Fernandes, & Jos�e, 2019; Hu, Fan, Qi, & Zhang, 2019; Plaza, Herrero, Cifuentes, & Ib�a~nez, 2009; Soni, Sudhakar, & Rana, 2017).”
Batista, A. P., Niccolai, A., Fradinho, P., Fragoso, S., Bursic, I., Rodolfi, L., Biondi, N., Tredici, M. R., Sousa, I., & Raymundo, A. (2017) · Algal Research · doi:10.1016/j.algal.2017.07.017 · Cited by 407
Severini, C., Azzollini, D., Albenzio, M., & Derossi, A. (2018) · Food Research International · doi:10.1016/j.foodres.2018.01.034 · Cited by 293
Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: a review
Pérez, B., Nykvist, H., Brøgger, A. F., Larsen, M. B., & Falkeborg, M. F. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2019.02.090 · Cited by 205
Chlorella vulgaris biomass used as colouring source in traditional butter cookies
Gouveia, L., Batista, A. P., Miranda, A., Empis, J., & Raymundo, A. (2007) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2007.03.026 · Cited by 195
Toward the design of functional foods and biobased products by 3D printing: A review
Portanguen, S., Tournayre, P., Sicard, J., Astruc, T., & Mirade, P.-S. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.02.023 · Cited by 193
3D food printing: a categorised review of inks and their development
Voon, S. L., An, J., Wong, G., Zhang, Y., & Chua, C. K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1603508 · Cited by 175
Properties of 3D printed dough and optimization of printing parameters
Liu, Y., Liang, X., Saeed, A., Lan, W., & Qin, W. (2019) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2019.03.008 · Cited by 156
Research works printed but not linked: 58
- An, 2019, Investigation on characteristics of 3D printing using Nostoc sphaeroides biomass, Journal of the Science of Food and Agriculture, 99, 639, 10.1002/jsfa.9226 · DOI
- Betoret, 2011, Functional foods development: Trends and technologies, Trends in Food Science & Technology, 22, 498, 10.1016/j.tifs.2011.05.004 · DOI · Paper page
- Bigliardi, 2013, Innovation trends in the food industry: The case of functional foods, Trends in Food Science & Technology, 31, 118, 10.1016/j.tifs.2013.03.006 · DOI · Paper page
- Bolanho, 2014, Antioxidant and nutritional potential of cookies enriched with Spirulina platensis and sources of fibre, Journal of Food and Nutrition Research, 53, 171
- Carter, 2015, The critical water activity from dynamic dewpoint isotherms as an indicator of crispness in low moisture cookies, Journal of Food Measurement and Characterization, 9, 463, 10.1007/s11694-015-9254-3 · DOI
- Chaiklahan, 2013, Polysaccharide extraction from Spirulina sp. and its antioxidant capacity, International Journal of Biological Macromolecules, 58, 73, 10.1016/j.ijbiomac.2013.03.046 · DOI · Paper page
- Chevallier, 2002, Structural and chemical modifications of short dough during baking, Journal of Cereal Science, 35, 1, 10.1006/jcrs.2001.0388 · doi:10.1006/jcrs.2001.0388
- Czerwonka, 2018, Anticancer effect of the water extract of a commercial Spirulina (Arthrospira platensis) product on the human lung cancer A549 cell line, Biomedicine & Pharmacotherapy, 106, 292, 10.1016/j.biopha.2018.06.116 · DOI
- Da Silva, 2019, Spray-dried Spirulina platensis as an effective ingredient to improve yogurt formulations: Testing different encapsulating solutions, Journal of Functional Foods, 60, 103427, 10.1016/j.jff.2019.103427 · DOI
- Dankar, 2018, 3D printing technology: The new era for food customization and elaboration, Trends in Food Science & Technology, 75, 231, 10.1016/j.tifs.2018.03.018 · DOI · Paper page
- Dávalos, 2004, Extending applicability of the oxygen radical absorbance capacity (ORAC-Fluorescein) assay, Journal of Agricultural and Food Chemistry, 52, 48, 10.1021/jf0305231 · DOI · Paper page
- Day, 2009, Incorporation of functional ingredients into foods, Trends in Food Science & Technology, 20, 388, 10.1016/j.tifs.2008.05.002 · DOI · Paper page
- El-Baz, 2013, In vitro antiviral and antimicrobial activities of Spirulina platensis extract, Journal of Applied Pharmaceutical Science, 3, 52
- Godoi, 2016, 3d printing technologies applied for food design: Status and prospects, Journal of Food Engineering, 179, 44, 10.1016/j.jfoodeng.2016.01.025 · DOI · Paper page
- Gouveia, 2010, Microalgae – source of natural bioactive molecules as functional ingredients, Food Science & Technology Bulletin: Functional Foods, 7, 21
- Haque, 2016, Intensified green production of astaxanthin from Haematococcus pluvialis, Food and Bioproducts Processing, 99, 1, 10.1016/j.fbp.2016.03.002 · DOI
- Herrero, 2005, Optimization of accelerated solvent extraction of antioxidants from Spirulina platensis microalga, Food Chemistry, 93, 417, 10.1016/j.foodchem.2004.09.037 · DOI · Paper page
- He, 2019, 3D printing of food: Pre-treatment and post-treatment of materials, Critical Reviews in Food Science and Nutrition, 1
- Holland, 2018, Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting, Carbohydrate Polymers, 200, 229, 10.1016/j.carbpol.2018.07.064 · DOI
- Hough, 2001, Sensory texture of commercial biscuits as a function of water activity, Journal of Texture Studies, 32, 57, 10.1111/j.1745-4603.2001.tb01034.x · doi:10.1111/j.1745-4603.2001.tb01034.x
- Hu, 2019, Identification of anti-diabetes peptides from Spirulina platensis, Journal of Functional Foods, 56, 333, 10.1016/j.jff.2019.03.024 · DOI · Paper page
- Khouryieh, 2012, Physical and sensory characteristics of cookies prepared with flaxseed flour, Journal of the Science of Food and Agriculture, 92, 2366, 10.1002/jsfa.5642 · doi:10.1002/jsfa.5642
- Kim, 2019, Effect of hydrocolloid addition on dimensional stability in post-processing of 3D printable cookie dough, LWT - Food Science and Technology (Lebensmittel-Wissenschaft und -Technologie), 101, 69, 10.1016/j.lwt.2018.11.019 · DOI
- Kurd, 2015, Water soluble polysaccharides from Spirulina platensis: Extraction and in vitro anti-cancer activity, International Journal of Biological Macromolecules, 74, 498, 10.1016/j.ijbiomac.2015.01.005 · DOI
- Lafarga, 2019, Effect of microalgal biomass incorporation into foods: Nutritional and sensorial attributes of the end products, Algal Research, 41, 101566, 10.1016/j.algal.2019.101566 · DOI · Paper page
- Lille, 2018, Applicability of protein and fiber-rich food materials in extrusion-based 3D printing, Journal of Food Engineering, 220, 20, 10.1016/j.jfoodeng.2017.04.034 · DOI · Paper page
- Liu, 2018, 3D printed milk protein food simulant: Improving the printing performance of milk protein concentration by incorporating whey protein isolate, Innovative Food Science & Emerging Technologies, 49, 116, 10.1016/j.ifset.2018.07.018 · DOI · Paper page
- Liu, 2013, Optimization of ultrasonic extraction of phenolic compounds from Euryale ferox seed shells using response surface methodology, Industrial Crops and Products, 49, 837, 10.1016/j.indcrop.2013.07.023 · DOI · Paper page
- Liu, 2018, Impact of rheological properties of mashed potatoes on 3D printing, Journal of Food Engineering, 220, 76, 10.1016/j.jfoodeng.2017.04.017 · DOI · Paper page
- Lopez-Rubio, 2006, Bioactive packaging: Turning foods into healthier foods through biomaterials, Trends in Food Science & Technology, 17, 567, 10.1016/j.tifs.2006.04.012 · DOI · Paper page
- Lucas, 2018, Spirulina for snack enrichment: Nutritional, physical and sensory evaluations, Lebensmittel-Wissenschaft und -Technologie- Food Science and Technology, 90, 270, 10.1016/j.lwt.2017.12.032 · DOI · Paper page
- Manohar, 2002, Interrelationship between rheological characteristics of dough and quality of biscuits; use of elastic recovery of dough to predict biscuit quality, Food Research International, 35, 807, 10.1016/S0963-9969(02)00083-2 · DOI
- Manzocco, 2000, Review of non-enzymatic browning and antioxidant capacity in processed foods, Trends in Food Science & Technology, 11, 340, 10.1016/S0924-2244(01)00014-0 · DOI · Paper page
- Marcinkowska-Lesiak, 2017, The effect of different level of Spirulina powder on the chosen quality parameters of shortbread biscuits, Journal of Food Processing and Preservation, 42, 1
- Mokrzycki, 2011, Color difference ΔE - a survey, Machine Graphics and Vision, 20, 383
- Nayak, 2015, Effect of processing on phenolic antioxidants of fruits, vegetables, and grains—a review, Critical Reviews in Food Science and Nutrition, 55, 887, 10.1080/10408398.2011.654142 · DOI · Paper page
- Nogueira, 2018, Protein enrichment of biscuits: A review, Food Reviews International, 34, 796, 10.1080/87559129.2018.1441299 · DOI
- Nooshkam, 2019, The Maillard reaction products as food-born antioxidant and antibrowning agents in model and real food systems, Food Chemistry, 275, 644, 10.1016/j.foodchem.2018.09.083 · DOI · Paper page
- Oh, 2011, The effect of ultrasonificated extracts of Spirulina maxima on the anticancer activity, Marine Biotechnology, 13, 205, 10.1007/s10126-010-9282-2 · DOI · Paper page
- Onacik-Gür, 2018, Effect of Spirulina (Spirulina platensis) addition on textural and quality properties of cookies, Italian Journal of Food Science, 30, 1
- Ou, 2001, Development and validation of an improved oxygen radical absorbance capacity assay using fluorescein as the fluorescent probe, Journal of Agricultural and Food Chemistry, 49, 4619, 10.1021/jf010586o · DOI · Paper page
- Re, 1999, Antioxidant activity applying an improved ABTS radical cation decolorization assay, Free Radical Biology and Medicine, 26, 1231, 10.1016/S0891-5849(98)00315-3 · DOI · Paper page
- Roberfroid, 2000, Concepts and strategy of functional food science: The European perspective, American Journal of Clinical Nutrition, 71, 10.1093/ajcn/71.6.1660S · DOI · Paper page
- Šaponjac, 2016, Sour cherry pomace extract encapsulated in whey and soy proteins: Incorporation in cookies, Food Chemistry, 207, 27, 10.1016/j.foodchem.2016.03.082 · DOI · Paper page
- Silva, 2017, Extraction of biomolecules from Spirulina platensis using non-conventional processes and harmless solvents, Journal of Environmental Chemical Engineering, 5, 2101, 10.1016/j.jece.2017.04.008 · DOI
- Singleton, 1999, Analysis of total phenols and other oxidation substrates and antioxidants by mean of folin-ciocalteu reagent, Methods in Enzymology, 299, 152, 10.1016/S0076-6879(99)99017-1 · DOI · Paper page
- Sun, 2015, An overview of 3D printing technologies for food fabrication, Food and Bioprocess Technology, 8, 1605, 10.1007/s11947-015-1528-6 · DOI · Paper page
- Sun, 2018, Extrusion-based food printing for digitalized food design and nutrition control, Journal of Food Engineering, 220, 1, 10.1016/j.jfoodeng.2017.02.028 · DOI · Paper page
- Syarina, 2015, Wound healing potential of Spirulina platensis extracts on human dermal fibroblast cells, EXCLI Journal, 14, 385
- Tan, 2018, Extrusion-based 3D food printing -Materials and machines, International Journal of Bioprinting, 4, 1
- Walker, 2012, Characterizing physicochemical changes of cookies baked in a commercial oven, Food Research International, 48, 249, 10.1016/j.foodres.2012.04.003 · doi:10.1016/j.foodres.2012.04.003
- Wang, 2018, Investigation on fish surimi gel as promising food material for 3D printing, Journal of Food Engineering, 220, 101, 10.1016/j.jfoodeng.2017.02.029 · DOI · Paper page
- Wardhani, 2010, Optimisation of antioxidants extraction from soybeans fermented by Aspergillus oryzae, Food Chemistry, 118, 731, 10.1016/j.foodchem.2009.05.057 · DOI
- Yang, 2019, Impact of processing parameters and post-treatment on the shape accuracy of 3D-printed baking dough, International Journal of Food Science and Technology, 54, 68, 10.1111/ijfs.13904 · DOI
- Yang, 2018, Physical properties of 3D printed baking dough as affected by different compositions, Innovative Food Science & Emerging Technologies, 49, 202, 10.1016/j.ifset.2018.01.001 · DOI · Paper page
- Yilmaz, 2005, Antioxidant activity of water-soluble Maillard reaction products, Food Chemistry, 93, 273, 10.1016/j.foodchem.2004.09.043 · DOI · Paper page
- Zaid, 2015, Antioxidant and anticancer activity of Spirulina platensis water extracts, International Journal of Pharmacology, 11, 846, 10.3923/ijp.2015.846.851 · DOI
- Zou, 2013, Response surface methodology for ultrasound-assisted extraction of astaxanthin from Haematococcus pluvialis, Marine Drugs, 11, 1644, 10.3390/md11051644 · DOI · Paper page
Cited by
Yu, J., Wang, X.-Y., Li, D., Wang, L.-J., & Wang, Y. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107824 · Cited by 285
Microalgae Encapsulation Systems for Food, Pharmaceutical and Cosmetics Applications
Vieira, M. V., Pastrana, L. M., & Fuciños, P. (2020) · Marine Drugs · doi:10.3390/md18120644 · Cited by 205
“Functional food, in general terms, may be defined as a natural or processed food, which contains an identified component, in qualitative and quantitative amounts, with a proven and documented health benefit [136,137].”
BackgroundSelf-citationMallakpour, S., Azadi, E., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102436 · Cited by 178
Barros de Medeiros, V. P., da Costa, W. K. A., da Silva, R. T., Pimentel, T. C., & Magnani, M. (2022) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2021.1879729 · Cited by 134
Letras, P., Oliveira, S., Varela, J., Nunes, M. C., & Raymundo, A. (2022) · Algal Research · doi:10.1016/j.algal.2022.102863 · Cited by 73
Self-citation
Metadata
- Authors
- Vieira, M. V., Oliveira, S. M., Amado, I. R., Fasolin, L. H., Vicente, A. A., Pastrana, L. M., & Fuciños, P.
- Venue
- Food Hydrocolloids
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 107
- Pages
- 105893
- ISSN
- 0268-005X (ISSN-L)
- OpenAlex
- W2963093087
- Cited by
- 158
- References
- 11
- FWCI
- 13.28
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Interreg
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printed functional cookies fortified with Arthrospira platensis: Evaluation of its antioxidant potential and physical-chemical characterization. https://app.cochat.ai/papers/10.1016/j.foodhyd.2020.105893
- The paper
- Vieira, M. V., Oliveira, S. M., Amado, I. R., Fasolin, L. H., Vicente, A. A., Pastrana, L. M., & Fuciños, P. (2020). 3D printed functional cookies fortified with Arthrospira platensis: Evaluation of its antioxidant potential and physical-chemical characterization. Food Hydrocolloids. https://doi.org/10.1016/j.foodhyd.2020.105893
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.