The DOI matches its Crossref record; 165 of the 165 references it cites were found in a registry or an index.
A typology of circular start-ups: An Analysis of 128 circular business models
Open accessAbstract
The circular economy (CE) concept is much-heralded among policy-makers, scholars and industry professionals as an accelerated pathway towards sustainability. This move away from the dominant linear system where products are discarded at the end of product lifecycle is deemed necessary since it is the main cause of an accelerated resource consumption. Business models are considered as a key enabler for the shift from a linear to a CE. However, research on circular business models has mainly focused on circular approaches adopted by incumbent firms, while the contributions of newly established firms (the authors call these ’circular start-ups’) have been largely overlooked. This article scrutinises the business models of circular start-ups and how they may differ from those of incumbent firms embracing CE. For this, it analyses the circular business model strategies and innovations adopted by circular start-ups, relying on a novel data sample of 128 circular start-ups identified in three major CE ecosystems in Europe: the Randstad region in the Netherlands, Berlin and London. Based on this data, a novel typology of circular start-ups is proposed, distinguishing between five circular start-up archetypes: design-based, waste-based, platform-based, service-based and nature-based start-ups. The results also show that circular start-ups tend to embrace strategies corresponding to higher levels of circularity than those of incumbents. This preliminarily suggests that circular start-ups can indeed make major contributions to transitioning towards CE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three Approaches to Qualitative Content Analysis
Hsieh, H.-F., & Shannon, S. E. (2005) · Qualitative Health Research · doi:10.1177/1049732305276687 · Cited by 44,601
Content Analysis: An Introduction to its Methodology.
Shelley, M., & Krippendorff, K. (1984) · Journal of the American Statistical Association · doi:10.2307/2288384 · Cited by 24,312
Content Analysis: An Introduction to Its Methodology
Krippendorff, K. (2019) · doi:10.4135/9781071878781 · Cited by 15,448
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
The Content Analysis Guidebook
Neuendorf, K. A. (2017) · doi:10.4135/9781071802878 · Cited by 9,286 · cited 1×
“In case of diverging coding results, the coding rules were reconsidered, possibly leading to their modification e a good practice to enhance reliability in manual coding (e.g. Hruschka et al., 2004; Neuendorf, 2016).”
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Self-citationHenderson, R. M., & Clark, K. B. (1990) · Administrative Science Quarterly · doi:10.2307/2393549 · Cited by 8,357
Business Model Generation : A Handbook for Visionaries, Game Changers, and Challengers
Osterwalder, A., & Pigneur, Y. (2010) · Journal of International Crisis and Risk Communication Research · Cited by 6,869
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
From a literature review to a conceptual framework for sustainable supply chain management
Seuring, S., & Müller, M. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.020 · Cited by 6,341
A literature and practice review to develop sustainable business model archetypes
Bocken, N. M. P., Short, S. W., Rana, P., & Evans, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.039 · Cited by 4,366
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Business model innovation: Opportunities and barriers
Chesbrough, H. (2010) · Long Range Planning · doi:10.1016/j.lrp.2009.07.010 · Cited by 3,850
Cradle to cradle: remaking the way we make things
(2002) · Choice Reviews Online · doi:10.5860/choice.40-0914 · Cited by 3,829
Clarifying Business Models: Origins, Present, and Future of the Concept
Osterwalder, A., Pigneur, Y., & Tucci, C. L. (2005) · Communications of the Association for Information Systems · doi:10.17705/1cais.01601 · Cited by 3,350
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
van Dijck, J., Poell, T., & de Waal, M. (2018) · doi:10.1093/oso/9780190889760.001.0001 · Cited by 2,951
Zahra, S. A., Ireland, R. D., & Hitt, M. A. (2000) · Academy of Management Journal · doi:10.2307/1556420 · Cited by 2,893
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Functions of innovation systems: A new approach for analysing technological change
Hekkert, M. P., Suurs, R. A. A., Negro, S. O., Kuhlmann, S., & Smits, R. E. H. M. (2007) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2006.03.002 · Cited by 2,741
Self-citationBusiness models for sustainable innovation: state-of-the-art and steps towards a research agenda
Boons, F., & Lüdeke-Freund, F. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.07.007 · Cited by 2,469
Eight types of product–service system: Eight ways to sustainability? Experiences from SusProNet
Tukker, A. (2004) · Business Strategy and the Environment · doi:10.1002/bse.414 · Cited by 2,456
Sustainable entrepreneurship and sustainability innovation: categories and interactions
Schaltegger, S., & Wagner, M. (2011) · Business Strategy and the Environment · doi:10.1002/bse.682 · Cited by 2,049
State-of-the-art in product-service systems
Baines, T. S., Lightfoot, H. W., Evans, S., Neely, A., Greenough, R., Peppard, J., Roy, R., Shehab, E., Braganza, A., Tiwari, A., et al. (2007) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem858 · Cited by 1,969
Product services for a resource-efficient and circular economy – a review
Tukker, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.049 · Cited by 1,961
I NDUSTRIAL S YMBIOSIS : Literature and Taxonomy
Chertow, M. R. (2000) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.25.1.313 · Cited by 1,917 · cited 1×
“IS is a commonly known concept (Chertow, 2000) and is increasingly considered a tool for the implementation of CE (Baldassarre et al., 2019; Bocken et al., 2014; Domenech et al., 2019; Forum for the Future, 2016; Mortensen, Kørnøv, 2019; Prosman et al., 2017).”
MethodFoss, N. J., & Saebi, T. (2017) · Journal of Management · doi:10.1177/0149206316675927 · Cited by 1,907
Reike, D., Vermeulen, W. J. V., & Witjes, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.027 · Cited by 1,886
Social Enterprises as Hybrid Organizations: A Review and Research Agenda
Doherty, B., Haugh, H., & Lyon, F. (2014) · International Journal of Management Reviews · doi:10.1111/ijmr.12028 · Cited by 1,821
Dean, T. J., & McMullen, J. S. (2007) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2005.09.003 · Cited by 1,797
Market imperfections, opportunity and sustainable entrepreneurship
Cohen, B., & Winn, M. I. (2007) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2004.12.001 · Cited by 1,691
Going Backwards: Reverse Logistics Trends and Practices
Rogers, D. S., & Tibben‐Lembke, R. S. (1999) · Medical Entomology and Zoology · Cited by 1,648
Sustainable business model innovation: A review
Geissdoerfer, M., Vladimirova, D., & Evans, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.240 · Cited by 1,630
Designing the Business Models for Circular Economy—Towards the Conceptual Framework
Lewandowski, M. (2016) · Sustainability · doi:10.3390/su8010043 · Cited by 1,610
Sustainability‐oriented Innovation: A Systematic Review
Adams, R., Jeanrenaud, S., Bessant, J., Denyer, D., & Overy, P. (2016) · International Journal of Management Reviews · doi:10.1111/ijmr.12068 · Cited by 1,584
Kabisch, N., Frantzeskaki, N., Pauleit, S., Naumann, S., Davis, M., Artmann, M., Haase, D., Knapp, S., Korn, H., Stadler, J., et al. (2016) · Ecology and Society · doi:10.5751/es-08373-210239 · Cited by 1,490
Conceptualizing a “Sustainability Business Model”
Stubbs, W., & Cocklin, C. (2008) · Organization & Environment · doi:10.1177/1086026608318042 · Cited by 1,461
Sustainability-oriented innovation of SMEs: a systematic review
Klewitz, J., & Hansen, E. G. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.07.017 · Cited by 1,435
Hockerts, K., & Wüstenhagen, R. (2010) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2009.07.005 · Cited by 1,389
The emergence of circular economy: a new framing around prolonging resource productivity
Blomsma, F., & Brennan, G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12603 · Cited by 1,383
Exploring the financial consequences of the servitization of manufacturing
Neely, A. (2008) · Operations Management Research · doi:10.1007/s12063-009-0015-5 · Cited by 1,370
Defourny, J., & Nyssens, M. (2010) · Journal of Social Entrepreneurship · doi:10.1080/19420670903442053 · Cited by 1,365
Shepherd, D. A., & Patzelt, H. (2011) · Entrepreneurship Theory and Practice · doi:10.1111/j.1540-6520.2010.00426.x · Cited by 1,356
Sustainable development and entrepreneurship: Past contributions and future directions
Hall, J. K., Daneke, G. A., & Lenox, M. J. (2010) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2010.01.002 · Cited by 1,331
Rizos, V., Behrens, A., Van der Gaast, W., Hofman, E., Ioannou, A., Kafyeke, T., Flamos, A., Rinaldi, R., Papadelis, S., Hirschnitz-Garbers, M., et al. (2016) · Sustainability · doi:10.3390/su8111212 · Cited by 1,265
Green innovation in technology and innovation management – an exploratory literature review
Schiederig, T., Tietze, F., & Herstatt, C. (2012) · R&D Management · doi:10.1111/j.1467-9310.2011.00672.x · Cited by 1,159
The Performance of Incumbent Firms in the Face of Radical Technological Innovation
Hill, C. W. L., & Rothaermel, F. T. (2003) · The Academy of Management Review · doi:10.2307/30040712 · Cited by 1,155
Haas, W., Krausmann, F., Wiedenhofer, D., & Heinz, M. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12244 · Cited by 1,154
Business model innovation for circular economy and sustainability: A review of approaches
Pieroni, M. P. P., McAloone, T. C., & Pigosso, D. C. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.036 · Cited by 1,143
Growth in global materials use, GDP and population during the 20th century
Krausmann, F., Gingrich, S., Eisenmenger, N., Erb, K.-H., Haberl, H., & Fischer-Kowalski, M. (2009) · Ecological Economics · doi:10.1016/j.ecolecon.2009.05.007 · Cited by 1,137
The Emergence of Social Enterprise
(2001) · Routledge eBooks · doi:10.4324/9780203164679 · Cited by 1,079
Circular Business Model Innovation: Inherent Uncertainties
Linder, M., & Williander, M. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1906 · Cited by 1,039
Tukker, A., & Tischner, U. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.01.022 · Cited by 979
Towards a new taxonomy of circular economy business models
Urbinati, A., Chiaroni, D., & Chiesa, V. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.047 · Cited by 971
(1998) · Journal of Business Logistics · Cited by 960
Jayal, A. D., Badurdeen, F., Dillon, O. W., & Jawahir, I. S. (2010) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2010.03.006 · Cited by 948
The business model: an integrative framework for strategy execution
Richardson, J. (2008) · Strategic Change · doi:10.1002/jsc.821 · Cited by 920
Circular supply chain management: a definition and structured literature review
Farooque, M., Zhang, A., Thürer, M., Qu, T., & Huisingh, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.303 · Cited by 894
The structuration of socio-technical regimes—Conceptual foundations from institutional theory
Fuenfschilling, L., & Truffer, B. (2014) · Research Policy · doi:10.1016/j.respol.2013.10.010 · Cited by 878
Reliability in Coding Open-Ended Data: Lessons Learned from HIV Behavioral Research
Hruschka, D. J., Schwartz, D., St.John, D. C., Picone-Decaro, E., Jenkins, R. A., & Carey, J. W. (2004) · Field Methods · doi:10.1177/1525822x04266540 · Cited by 829
Seven lessons for planning nature-based solutions in cities
Frantzeskaki, N. (2019) · Environmental Science & Policy · doi:10.1016/j.envsci.2018.12.033 · Cited by 828
The entrepreneur–environment nexus: Uncertainty, innovation, and allocation
York, J. G., & Venkataraman, S. (2010) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2009.07.007 · Cited by 818
Technological Transitions And System Innovations: A Co-evolutionary And Socio-technical Analysis
Geels, F. W. (2005) · Cited by 780
Schaltegger, S., Lüdeke-Freund, F., & Hansen, E. G. (2016) · Organization & Environment · doi:10.1177/1086026616633272 · Cited by 774
Kirchherr, J., & Charles, K. (2018) · PLOS ONE · doi:10.1371/journal.pone.0201710 · Cited by 748
Self-citationSustainable Entrepreneurship: A Convergent Process Model
Belz, F. M., & Binder, J. K. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1887 · Cited by 712
A comparison of methods and sources for obtaining estimates of new venture performance
Brush, C. G., & Vanderwerf, P. A. (1992) · Journal of Business Venturing · doi:10.1016/0883-9026(92)90010-o · Cited by 708
Technological Transitions and System Innovations: A Co-Evolutionary and Socio-Technical Analysis
Geels, F. W. (2005) · Edward Elgar Publishing eBooks · doi:10.4337/9781845424596 · Cited by 700
Faivre, N., Fritz, M., Freitas, T., de Boissezon, B., & Vandewoestijne, S. (2017) · Environmental Research · doi:10.1016/j.envres.2017.08.032 · Cited by 693
Pacheco, D. F., Dean, T. J., & Payne, D. S. (2010) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2009.07.006 · Cited by 663
Total and per capita value of food loss in the United States
Buzby, J. C., & Hyman, J. (2012) · Food Policy · doi:10.1016/j.foodpol.2012.06.002 · Cited by 660
Sustainability-driven entrepreneurship: Principles of organization design
Parrish, B. D. (2010) · Journal of Business Venturing · doi:10.1016/j.jbusvent.2009.05.005 · Cited by 598
Nature‐Based Solutions for Europe's Sustainable Development
Maes, J., & Jacobs, S. (2017) · Conservation Letters · doi:10.1111/conl.12216 · Cited by 586
A Framework for Sustainable Circular Business Model Innovation
Antikainen, M., & Valkokari, K. (2016) · Technology Innovation Management Review · doi:10.22215/timreview/1000 · Cited by 565
A Conceptual Framework for Circular Design
Moreno, M., De los Rios, C., Rowe, Z., & Charnley, F. (2016) · Sustainability · doi:10.3390/su8090937 · Cited by 564
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Seizing the White Space: Business Model Innovation for Growth and Renewal
Johnson, M. (2010) · Cited by 528
Ren, S., Zhang, Y., Liu, Y., Sakao, T., Huisingh, D., & Almeida, C. M. V. B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.025 · Cited by 525
Franco, M. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.056 · Cited by 510
Green entrepreneurial orientation for enhancing firm performance: A dynamic capability perspective
Jiang, W., Chai, H., Shao, J., & Feng, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.104 · Cited by 507
Reducing waste: repair, recondition, remanufacture or recycle?
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006) · Sustainable Development · doi:10.1002/sd.271 · Cited by 502
Taking Stock of Industrial Ecology
(2016) · Springer eBooks · doi:10.1007/978-3-319-20571-7 · Cited by 481
Skills and capabilities for a sustainable and circular economy: The changing role of design
De los Rios, I. C., & Charnley, F. J. S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.130 · Cited by 479
Ravi, V., Shankar, R., & Tiwari, M. K. (2005) · Computers & Industrial Engineering · doi:10.1016/j.cie.2005.01.017 · Cited by 474
Lüdeke-Freund, F., Carroux, S., Joyce, A., Massa, L., & Breuer, H. (2018) · Sustainable Production and Consumption · doi:10.1016/j.spc.2018.06.004 · Cited by 436
Remanufacturing for the Circular Economy: An Examination of Consumer Switching Behavior
Hazen, B. T., Mollenkopf, D. A., & Wang, Y. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1929 · Cited by 429
Massa, L., & Tucci, C. L. (2014) · Oxford Handbooks Online · doi:10.1093/oxfordhb/9780199694945.013.002 · Cited by 404
New design challenges to widely implement ‘Sustainable Product–Service Systems’
Vezzoli, C., Ceschin, F., Diehl, J. C., & Kohtala, C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.061 · Cited by 397
The Emergence of Social Enterprise
(2001) · Taylor & Francis eBooks · doi:10.4324/9780203278741 · Cited by 391
Circular Business Model Transformation: A Roadmap for Incumbent Firms
Frishammar, J., & Parida, V. (2019) · California Management Review · doi:10.1177/0008125618811926 · Cited by 388
Food waste management innovations in the foodservice industry
Martin-Rios, C., Demen-Meier, C., Gössling, S., & Cornuz, C. (2018) · Waste Management · doi:10.1016/j.wasman.2018.07.033 · Cited by 386
Geng, Y., Zhu, Q., Doberstein, B., & Fujita, T. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.036 · Cited by 382
Value creation and business models: Refocusing the intellectual capital debate
Beattie, V., & Smith, S. J. (2013) · The British Accounting Review · doi:10.1016/j.bar.2013.06.001 · Cited by 377
Stewart, R., & Niero, M. (2018) · Business Strategy and the Environment · doi:10.1002/bse.2048 · Cited by 369
Sustainable business model research and practice: Emerging field or passing fancy?
Lüdeke-Freund, F., & Dembek, K. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.093 · Cited by 368
Domenech, T., Bleischwitz, R., Doranova, A., Panayotopoulos, D., & Roman, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.09.016 · Cited by 365
Baldassarre, B., Schepers, M., Bocken, N., Cuppen, E., Korevaar, G., & Calabretta, G. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.091 · Cited by 361
Heyes, G., Sharmina, M., Mendoza, J. M. F., Gallego-Schmid, A., & Azapagic, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.168 · Cited by 360
Creating value in the circular economy: A structured multiple-case analysis of business models
Ranta, V., Aarikka-Stenroos, L., & Mäkinen, S. J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.072 · Cited by 351
A Framework for Ecopreneurship
Schaltegger, S. (2002) · Greener Management International · doi:10.9774/gleaf.3062.2002.su.00006 · Cited by 331
Corporate-entrepreneur collaborations to advance a circular economy
Veleva, V., & Bodkin, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.196 · Cited by 321
What motivates ecopreneurs to start businesses?
Kirkwood, J., & Walton, S. (2010) · International Journal of Entrepreneurial Behavior & Research · doi:10.1108/13552551011042799 · Cited by 298
Towards an Education for the Circular Economy (ECE): Five Teaching Principles and a Case Study
Kirchherr, J., & Piscicelli, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104406 · Cited by 265
Self-citationDesign for Circular Behaviour: Considering Users in a Circular Economy
Wastling, T., Charnley, F., & Moreno, M. (2018) · Sustainability · doi:10.3390/su10061743 · Cited by 264
Product service systems in the automobile industry: contribution to system innovation?
Williams, A. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.05.034 · Cited by 253
The sharing economy: A comprehensive business model framework
Ritter, M., & Schanz, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.154 · Cited by 251
Nature based solution for improving mental health and well-being in urban areas
Vujcic, M., Tomicevic-Dubljevic, J., Grbic, M., Lecic-Tosevski, D., Vukovic, O., & Toskovic, O. (2017) · Environmental Research · doi:10.1016/j.envres.2017.06.030 · Cited by 241
Diaz Lopez, F. J., Bastein, T., & Tukker, A. (2019) · Ecological Economics · doi:10.1016/j.ecolecon.2018.03.009 · Cited by 229
Pinkse, J., & Groot, K. (2015) · Entrepreneurship Theory and Practice · doi:10.1111/etap.12055 · Cited by 219
Distinctions not Dichotomies: Exploring Social, Sustainable, and Environmental Entrepreneurship
Thompson, N., Kiefer, K., & York, J. G. (2011) · Advances in Entrepreneurship, Firm Emergence and Growth · doi:10.1108/s1074-7540(2011)0000013012 · Cited by 216
The venture development processes of “sustainable” entrepreneurs
Choi, D. Y., & Gray, E. R. (2008) · Management Research News · doi:10.1108/01409170810892127 · Cited by 209
Nature-based solutions: Settling the issue of sustainable urbanization
Lafortezza, R., & Sanesi, G. (2019) · Environmental Research · doi:10.1016/j.envres.2018.12.063 · Cited by 206
Product biographies in servitization and the circular economy
Spring, M., & Araujo, L. (2017) · Industrial Marketing Management · doi:10.1016/j.indmarman.2016.07.001 · Cited by 205
Aligning retail reverse logistics practice with circular economy values: an exploratory framework
Bernon, M., Tjahjono, B., & Ripanti, E. F. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449266 · Cited by 202
Handbook of recycling : state-of-the-art for practitioners, analysts, and scientists
Worrell, E., & Reuter, M. A. (2014) · Cited by 196
Product-Service Systems. Using an Existing Concept as a New Approach to Sustainability
Manzini, E., Vezzoli, C., & Clark, G. (2001) · J. of Design Research · doi:10.1504/jdr.2001.009811 · Cited by 193
Green start-ups and local knowledge spillovers from clean and dirty technologies
Colombelli, A., & Quatraro, F. (2019) · Small Business Economics · doi:10.1007/s11187-017-9934-y · Cited by 182
Mode of circular economy in China's iron and steel industry: a case study in Wu'an city
Ma, S.-H., Wen, Z.-G., Chen, J.-N., & Wen, Z.-C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.008 · Cited by 181
Why not to green a city? Institutional barriers to preserving urban ecosystem services
Kronenberg, J. (2014) · Ecosystem Services · doi:10.1016/j.ecoser.2014.07.002 · Cited by 177
A Framework for Ecopreneurship: Leading Bioneers and Environmental Managers to Ecopreneurship
Schaltegger, S. (2002) · Cited by 177
Innovation process of new ventures driven by sustainability
Keskin, D., Diehl, J. C., & Molenaar, N. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.05.012 · Cited by 175
Product-service system business model archetypes and sustainability
Yang, M., & Evans, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.067 · Cited by 173
Product-Service Systems: reviewing achievements and refining the research agenda
Mont, O., & Tukker, A. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.01.017 · Cited by 168
Beyond the throwaway society: a life cycle-based assessment of the environmental benefit of reuse
Castellani, V., Sala, S., & Mirabella, N. (2014) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.1614 · Cited by 167
Smart Aquaponics System for Urban Farming
Kyaw, T. Y., & Ng, A. K. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.694 · Cited by 163
The Circular Economy: Exploring the Introduction of the Concept Among S&P 500 Firms
Bocken, N. M. P., Ritala, P., & Huotari, P. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12605 · Cited by 162
Ünal, E., & Shao, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.291 · Cited by 162
Conceptualizing ReX for Aggregating End-of-life Strategies in Product Development
Sihvonen, S., & Ritola, T. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.01.026 · Cited by 161
Krauze, K., & Wagner, I. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.187 · Cited by 158
Ramanathan, R. (2011) · International Journal of Production Economics · doi:10.1016/j.ijpe.2011.01.005 · Cited by 158
Product-service systems for office furniture: barriers and opportunities on the European market
Besch, K. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.12.003 · Cited by 155
Niero, M., Hauschild, M. Z., Boas, S. H., & Olsen, S. I. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12554 · Cited by 145
Sustainable Retailing – Influencing Consumer Behaviour on Food Waste
Young, C. W., Russell, S. V., Robinson, C. A., & Chintakayala, P. K. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1966 · Cited by 144
Critical factors for industrial symbiosis emergence process
Mortensen, L., & Kørnøv, L. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.222 · Cited by 141
Green start-ups – a new typology for sustainable entrepre-neurship and innovation research
Bergset, L., & Fichter, K. (2015) · Journal of Innovation Management · doi:10.24840/2183-0606_003.003_0009 · Cited by 124
Canıtez, F. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2019.01.008 · Cited by 114
A sustainable business model to fight food waste
Ribeiro, I., Sobral, P. J. D. A., Peças, P., & Henriques, E. M. P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.200 · Cited by 112
Business and production solutions
Brennan, G., Tennant, M., & Blomsma, F. (2015) · Routledge eBooks · doi:10.4324/9780203109496-11 · Cited by 110
Strategic collective system building to commercialize sustainability innovations
Planko, J., Cramer, J. M., Chappin, M. M. H., & Hekkert, M. P. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.108 · Cited by 107
Self-citationGreen start-up finance – where do particular challenges lie?
Bergset, L. (2017) · International Journal of Entrepreneurial Behaviour & Research · doi:10.1108/ijebr-11-2015-0260 · Cited by 107
Entrepreneurial network composition
Klyver, K., & Terjesen, S. A. (2007) · Women in Management Review · doi:10.1108/09649420710836344 · Cited by 105
Food Waste to Bioenergy via Anaerobic Processes
Dung, T. N. B., Sen, B., Chen, C.-C., Kumar, G., & Lin, C. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.1113 · Cited by 105
Pacheco, D. A. D. J., ten Caten, C. S., Jung, C. F., Sassanelli, C., & Terzi, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.152 · Cited by 101
Customer experience creation for after-use products: A product–service systems-based review
Schallehn, H., Seuring, S. A., Strähle, J., & Freise, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.292 · Cited by 96
Thompson, N., Herrmann, A. M., & Hekkert, M. P. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.08.011 · Cited by 75
Self-citationHow tree professionals perceive trees and conflicts about trees in Australia's urban forest
Kirkpatrick, J., Davison, A., & Harwood, A. (2013) · Landscape and Urban Planning · doi:10.1016/j.landurbplan.2013.07.009 · Cited by 72
Hyde, K., Smith, A., Smith, M., & Henningsson, S. (2001) · Journal of Cleaner Production · doi:10.1016/s0959-6526(00)00050-0 · Cited by 69
Jawahir, I. S., Rouch, K. E., Dillon, O. W., Holloway, L. A., & Hall, A. (2007) · International journal of engineering education · Cited by 67
Governance of electronic waste recycling based on social capital embeddedness theory
Peng, B., Tu, Y., & Wei, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.265 · Cited by 66
Sustainability : Key Issues - 978-0-415-52986-0
Kopnina, H. (2015) · International Journal of Performability Engineering · Cited by 64
Remanufacturing with upgrade PSS for new sustainable business models
Copani, G., & Behnam, S. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2018.10.005 · Cited by 63
Zucchella, A., & Urban, S. (2019) · Springer eBooks · doi:10.1007/978-3-030-18999-0 · Cited by 62
Nhemachena, C., & Murimbika, M. (2018) · Business Strategy & Development · doi:10.1002/bsd2.16 · Cited by 61
Closing Global Material Loops: Initial Insights into Firm‐Level Challenges
Prosman, E. J., Wæhrens, B. V., & Liotta, G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12535 · Cited by 54
Fostering social capital in an international multi-stakeholder issue network
Saffer, A. J. (2019) · Public Relations Review · doi:10.1016/j.pubrev.2019.02.004 · Cited by 54
Carvalho, A. D. P., Cunha, S. K. D., Lima, L. F. D., & Carstens, D. D. (2017) · RAI Revista de Administração e Inovação · doi:10.1016/j.rai.2017.02.001 · Cited by 51
What Do We Know About Metal Recycling Rates?
Graedel, T. E., Allwood, J., Birat, J.-P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00342.x · Cited by 43
Implementation of Circular Economy principles in PSS operations
Kühl, C., Tjahjono, B., Bourlakis, M., & Aktaş, E. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.303 · Cited by 43
Plant Factory Using Artificial Light
Anpo, M. 1., Fukuda, H., & Wada, T. (2018) · Elsevier eBooks · doi:10.1016/c2017-0-00580-3 · Cited by 40
Tunn, V. S. C., Fokker, R., Luijkx, K. A., de Jong, S., & Schoormans, J. P. L. (2019) · Sustainability · doi:10.3390/su11010274 · Cited by 36
Overcoming the Product-Service Model Adoption Obstacles
Pessôa, M. V. P., & Becker, J. M. J. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.03.062 · Cited by 19
Business and production solutions: closing loops and the circular economy
Brennan, G., Tennant, M., & Blomsma, F. (2015) · Middlesex University Research Repository (Middlesex University Of London) · Cited by 19
Genetic Counselors in Startup Companies: Redefining the Genetic Counselor Role
Rabideau, M. M., Wong, K. K., Gordon, E. S., et al. (2016) · Journal of Genetic Counseling · doi:10.1007/s10897-015-9923-8 · Cited by 16
Examining the Social Capital Content and Structure in the Pre-start-up Planning
Păunescu, C., & Badea, M. R. (2014) · Procedia Economics and Finance · doi:10.1016/s2212-5671(14)00510-3 · Cited by 11
Classifying circular business models: a practice-based review
Whalen, K. (2017) · Research in design series · doi:10.3233/978-1-61499-820-4-417 · Cited by 11
Cited by
Conceptualizing the Circular Economy (Revisited): An Analysis of 221 Definitions
Kirchherr, J., Yang, N.-H. N., Schulze-Spüntrup, F., Heerink, M. J., & Hartley, K. (2023) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2023.107001 · Cited by 1,289
Self-citationBag, S., & Pretorius, J. H. C. (2022) · International Journal of Organizational Analysis · doi:10.1108/ijoa-04-2020-2120 · Cited by 506
Policies for transitioning towards a circular economy: Expectations from the European Union (EU)
Hartley, K., van Santen, R., & Kirchherr, J. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104634 · Cited by 468
Self-citationCircular futures: what will they look like
Bauwens, T., Hekkert, M., & Kirchherr, J. (2020) · Ecological Economics · doi:10.1016/j.ecolecon.2020.106703 · Cited by 279
Self-citationDrivers and barriers for circular business model innovation
Geissdoerfer, M., Santa‐Maria, T., Kirchherr, J., & Pelzeter, C. (2023) · Business Strategy and the Environment · doi:10.1002/bse.3339 · Cited by 267
Self-citation
Metadata
- Authors
- Henry, M., Bauwens, T., Hekkert, M., & Kirchherr, J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 245
- Pages
- 118528
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2976493039
- Cited by
- 421
- References
- 165
- FWCI
- 51.00
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.