The DOI matches its Crossref record; 210 of the 210 references it cites were found in a registry or an index.
A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects
Open accessAbstract
Mg and its alloys are drawing huge attention since the last two decades as a viable option for temporary implants applications. A commendable progress has already been made in the development of these alloys. The biodegradable nature of Mg, appreciable biocompatibility of elemental Mg, and its close resemblance to natural bone in terms of density and elastic modulus make them highly preferable option amongst other available alternatives in this field. This review article presents an overview covering the recent advancements made in the field of Mg-based biodegradable implants for orthopaedic implant applications. The paper focuses on alloy development and fabrication techniques, the state of the art of important Mg-based alloy systems in terms of their mechanical properties, in-vitro and in-vivo degradation behaviour and cytotoxicity. Further, the paper reviews the current progress achieved in the clinical transition of Mg-based alloys for orthopaedic fixtures. The review also includes the degradation mechanisms of the alloys in physiological environment and highlights the mismatch existing between the rate of bone healing and alloy degradation due to rapid corrosion of the alloys in such environment, which has still restricted their widespread application. Finally, the surface coating techniques available for the alloys as an effective way to reduce the degradation rate are reviewed, followed by a discussion on the future research prospects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials
Harun, W. S. W., Asri, R. I. M., Alias, J., Zulkifli, F. H., Kadirgama, K., Ghani, S. A. C., & Shariffuddin, J. H. M. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.10.162 · Cited by 349
RetractedUltrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Cappello, V., Marchetti, L., Parlanti, P., Landi, S., Tonazzini, I., Cecchini, M., Piazza, V., & Gemmi, M. (2016) · Scientific Reports · doi:10.1038/s41598-016-0001-8 · Cited by 13,097
Trumbo, P., Schlicker, S., Yates, A. A., & Poos, M. (2002) · Journal of the American Dietetic Association · doi:10.1016/s0002-8223(02)90346-9 · Cited by 5,993
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Azevedo, R. S. S., de Sousa, J. R., Araujo, M. T. F., Martins Filho, A. J., de Alcantara, B. N., Araujo, F. M. C., Queiroz, M. G. L., Cruz, A. C. R., Vasconcelos, B. H. B., Chiang, J. O., et al. (2018) · Scientific Reports · doi:10.1038/s41598-017-17765-5 · Cited by 3,478
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
The footprint of urban heat island effect in China
Zhou, D., Zhao, S., Zhang, L., Sun, G., & Liu, Y. (2015) · Scientific Reports · doi:10.1038/srep11160 · Cited by 1,621
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Control of biodegradation of biocompatable magnesium alloys
Song, G. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.01.001 · Cited by 1,514
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
Saris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Research on an Mg–Zn alloy as a degradable biomaterial
Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.028 · Cited by 1,336
Biomedical coatings on magnesium alloys – A review
Hornberger, H., Virtanen, S., & Boccaccini, A. R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.012 · Cited by 1,273
Recent advances on the development of magnesium alloys for biodegradable implants
Chen, Y., Xu, Z., Smith, C., & Sankar, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.005 · Cited by 1,236
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Jahnen-Dechent, W., & Ketteler, M. (2012) · Clinical Kidney Journal · doi:10.1093/ndtplus/sfr163 · Cited by 1,054
Zhang, Y., Xu, J., Ruan, Y. C., Yu, M. K., O'Laughlin, M., Wise, H., Chen, D., Tian, L., Shi, D., Wang, J., et al. (2016) · Nature Medicine · doi:10.1038/nm.4162 · Cited by 1,051
Corrosion of Metallic Biomaterials: A Review
Eliaz, N. (2019) · Materials · doi:10.3390/ma12030407 · Cited by 984
Bio‐Inspired, Smart, Multiscale Interfacial Materials
Xia, F., & Jiang, L. (2008) · Advanced Materials · doi:10.1002/adma.200800836 · Cited by 963
Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
Zhao, D., Witte, F., Lu, F., Wang, J., Li, J., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.017 · Cited by 945
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Erbel, R., Di Mario, C., Bartunek, J., Bonnier, J., de Bruyne, B., Eberli, F. R., Erne, P., Haude, M., Heublein, B., Horrigan, M., et al. (2007) · The Lancet · doi:10.1016/s0140-6736(07)60853-8 · Cited by 907
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
The anodic dissolution of magnesium in chloride and sulphate solutions
Song, G., Atrens, A., John, D. S., Wu, X., & Nairn, J. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00090-5 · Cited by 890
Coronary stents: A materials perspective
Mani, G., Feldman, M. D., Patel, D., & Agrawal, C. M. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.042 · Cited by 866
Biomaterials for bone tissue engineering scaffolds: a review
Qu, H., Fu, H., Han, Z., & Sun, Y. (2019) · RSC Advances · doi:10.1039/c9ra05214c · Cited by 827
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Novel Magnesium Alloys Developed for Biomedical Application: A Review
Li, N., & Zheng, Y. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.02.005 · Cited by 744
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Review of magnesium-based biomaterials and their applications
Sezer, N., Evis, Z., Kayhan, S. M., Tahmasebifar, A., & Koç, M. (2018) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.02.003 · Cited by 704
Grain refinement of magnesium alloys
StJohn, D. H., Qian, M., Easton, M. A., Cao, P., & Hildebrand, Z. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0030-6 · Cited by 695
Magnesium: nutrition and metabolism
Vormann, J. (2003) · Molecular Aspects of Medicine · doi:10.1016/s0098-2997(02)00089-4 · Cited by 671
Calcium phosphate coatings on magnesium alloys for biomedical applications: A review
Shadanbaz, S., & Dias, G. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.016 · Cited by 651
The electrochemical corrosion of pure magnesium in 1 N NaCl
Song, G., Atrens, A., Stjohn, D., Nairn, J., & Li, Y. (1997) · Corrosion Science · doi:10.1016/s0010-938x(96)00172-2 · Cited by 614
Magnesium alloys as implant materials – Principles of property design for Mg–RE alloys☆
Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit‐Römer, R., & Kainer, K. U. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.010 · Cited by 608
Developments in metallic biodegradable stents☆
Hermawan, H., Dubé, D., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.006 · Cited by 604
Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C., & Hort, N. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.024 · Cited by 598
A review on magnesium alloys as biodegradable materials
Gu, X.-N., & Zheng, Y.-F. (2010) · Frontiers of Materials Science in China · doi:10.1007/s11706-010-0024-1 · Cited by 598
Biodegradable magnesium-based implants in orthopedics-a general review and perspectives
Wang, J., Xu, J., Hopkins, C., Chow, D. H., & Qin, L. (2020) · Advanced Science · doi:10.1002/advs.201902443 · Cited by 574
Jones, L., Ho, W. Q., Ying, S., Ramakrishna, L., Srinivasan, K. G., Yurieva, M., Ng, W. P., Subramaniam, S., Hamadee, N. H., Joseph, S., et al. (2016) · Scientific Reports · doi:10.1038/srep34899 · Cited by 552
Kannan, M. B., & Raman, R. K. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.003 · Cited by 545
Exposure, metabolism, and toxicity of rare earths and related compounds.
Hirano, S., & Suzuki, K. T. (1996) · Environmental Health Perspectives · doi:10.1289/ehp.96104s185 · Cited by 540
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., Wang, X., Chen, S. H., Huang, L., Tian, L., et al. (2015) · Scientific Reports · doi:10.1038/srep10719 · Cited by 515
Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Sanchez, A. H. M., Luthringer, B. J. C., Feyerabend, F., & Willumeit, R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.048 · Cited by 503
Garg, S., & Serruys, P. W. (2010) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2010.06.007 · Cited by 501
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polydispersity and block copolymer self-assembly
Lynd, N. A., Meuler, A. J., & Hillmyer, M. A. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.003 · Cited by 485
Toxicological Evaluations of Rare Earths and Their Health Impacts to Workers: A Literature Review
Rim, K. T., Koo, K. H., & Park, J. S. (2013) · Safety and Health at Work · doi:10.5491/shaw.2013.4.1.12 · Cited by 484
Zhang, E., Yin, D., Xu, L., Yang, L., & Yang, K. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.024 · Cited by 480
Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy
Lee, J.-W., Han, H.-S., Han, K.-J., Park, J., Jeon, H., Ok, M.-R., Seok, H.-K., Ahn, J.-P., Lee, K. E., Lee, D.-H., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518238113 · Cited by 480
Hamu, G. B., Eliezer, D., & Wagner, L. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.084 · Cited by 451
Bioinorganics and biomaterials: Bone repair
Habibovic, P., & Barralet, J. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.027 · Cited by 441
In vivo corrosion and corrosion protection of magnesium alloy LAE442☆
Witte, F., Fischer, J., Nellesen, J., Vogt, C., Vogt, J., Donath, T., & Beckmann, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.012 · Cited by 438
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Progress of biodegradable metals
Li, H., Zheng, Y., & Qin, L. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.08.014 · Cited by 432
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Current status and outlook on the clinical translation of biodegradable metals
Han, H.-S., Loffredo, S., Jun, I., Edwards, J., Kim, Y.-C., Seok, H.-K., Witte, F., Mantovani, D., & Glyn-Jones, S. (2019) · Materials Today · doi:10.1016/j.mattod.2018.05.018 · Cited by 423
An Impedance Investigation of the Mechanism of Pure Magnesium Corrosion in Sodium Sulfate Solutions
Baril, G., Galicia, G., Deslouis, C., Pébère, N., Tribollet, B., & Vivier, V. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2401056 · Cited by 418
Calcium intake and bone mineral density: systematic review and meta-analysis
Tai, V., Leung, W., Grey, A., Reid, I. R., & Bolland, M. J. (2015) · BMJ · doi:10.1136/bmj.h4183 · Cited by 408
Remarkably Simple Fabrication of Superhydrophobic Surfaces Using Electroless Galvanic Deposition
Larmour, I. A., Bell, S. E. J., & Saunders, G. C. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604596 · Cited by 404
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Bioactive Coatings for Orthopaedic Implants—Recent Trends in Development of Implant Coatings
Zhang, B., Myers, D., Wallace, G., Brandt, M., & Choong, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150711878 · Cited by 394
Risk Factors for Venous Thromboembolism
Goldhaber, S. Z. (2010) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2010.01.057 · Cited by 383
Lim, T. S., Ryu, H. S., & Hong, S.-H. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.043 · Cited by 372
(2018) · PubMed Central · Cited by 365
Eddy Jai Poinern, G., Brundavanam, S., & Fawcett, D. (2013) · American Journal of Biomedical Engineering · doi:10.5923/j.ajbe.20120206.02 · Cited by 361
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents
Hermawan, H., Dube, D., & Mantovani, D. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32224 · Cited by 358
Surface design of biodegradable magnesium alloys — A review
Wu, G., Ibrahim, J. M., & Chu, P. K. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.10.009 · Cited by 358
Zhao, D., Huang, S., Lu, F., Wang, B., Yang, L., Qin, L., Yang, K., Li, Y., Li, W., Wang, W., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.11.038 · Cited by 349
Biodegradable polymers—an overview
Doppalapudi, S., Jain, A., Khan, W., & Domb, A. J. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3305 · Cited by 348
Asri, R. I. M., Harun, W. S. W., Hassan, M. A., Ghani, S. A. C., & Buyong, Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.031 · Cited by 347
Calcium orthophosphate coatings on magnesium and its biodegradable alloys
Dorozhkin, S. V. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.026 · Cited by 332
Neuropathology of aluminum toxicity in rats (glutamate and GABA impairment)
El-Rahman, S. (2003) · Pharmacological Research · doi:10.1016/s1043-6618(02)00336-5 · Cited by 321
Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys
Yin, S., Duan, W., Liu, W., Wu, L., Yu, J., Zhao, Z., Liu, M., Wang, P., Cui, J., & Zhang, Z. (2020) · Corrosion Science · doi:10.1016/j.corsci.2019.108419 · Cited by 316
Mechanical properties of magnesium alloys for medical application: A review
Chen, J., Tan, L., Yu, X., Etim, I. P., Ibrahim, M., & Yang, K. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2018.07.022 · Cited by 314
Mg–Zr–Sr alloys as biodegradable implant materials
Li, Y., Wen, C., Mushahary, D., Sravanthi, R., Harishankar, N., Pande, G., & Hodgson, P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.028 · Cited by 309
On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy
Gomes, M. P., Costa, I., Pébère, N., Rossi, J. L., Tribollet, B., & Vivier, V. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.03.080 · Cited by 306
Reprint of: The history of biodegradable magnesium implants: A review
Witte, F. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.017 · Cited by 297
Biodegradable magnesium implants for orthopedic applications
Waizy, H., Seitz, J.-M., Reifenrath, J., Weizbauer, A., Bach, F.-W., Meyer-Lindenberg, A., Denkena, B., & Windhagen, H. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6572-2 · Cited by 297
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Magnesium Implants: Prospects and Challenges
Chakraborty Banerjee, P., Al-Saadi, S., Choudhary, L., Harandi, S. E., & Singh, R. (2019) · Materials · doi:10.3390/ma12010136 · Cited by 280
Jamesh, M., Kumar, S., & Sankara Narayanan, T. S. N. (2011) · Corrosion Science · doi:10.1016/j.corsci.2010.10.011 · Cited by 262
Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys
Zander, D., & Zumdick, N. A. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.027 · Cited by 260
Materials perspective of polymers for additive manufacturing with selective laser sintering
Schmid, M., Amado, A., & Wegener, K. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.138 · Cited by 256
Nanotechnology-based biomaterials for orthopaedic applications: Recent advances and future prospects
Kumar, S., Nehra, M., Kedia, D., Dilbaghi, N., Tankeshwar, K., & Kim, K.-H. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110154 · Cited by 246
Chen, S., Guo, Y., Liu, R., Wu, S., Fang, J., Huang, B., Li, Z., Chen, Z., & Chen, Z. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.01.022 · Cited by 241
In vitro degradation behavior and cytocompatibility of Mg–Zn–Zr alloys
Huan, Z. G., Leeflang, M. A., Zhou, J., Fratila-Apachitei, L. E., & Duszczyk, J. (2010) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-010-4111-8 · Cited by 234
Nakamura, Y. (1997) · Fundamental and Applied Toxicology · doi:10.1006/faat.1997.2322 · Cited by 234
Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
Song, M.-S., Zeng, R.-C., Ding, Y.-F., Li, R. W., Easton, M., Cole, I., Birbilis, N., & Chen, X.-B. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.10.008 · Cited by 230
Qin, H., Zhao, Y., An, Z., Cheng, M., Wang, Q., Cheng, T., Wang, Q., Wang, J., Jiang, Y., Zhang, X., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.096 · Cited by 229
Cardiovascular stents: overview, evolution, and next generation
Borhani, S., Hassanajili, S., Ahmadi Tafti, S. H., & Rabbani, S. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0097-y · Cited by 226
Zhang, X., Yuan, G., Mao, L., Niu, J., Fu, P., & Ding, W. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.05.026 · Cited by 224
Wan, P., Tan, L., & Yang, K. (2016) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.05.003 · Cited by 218
Lin, X., Tan, L., Zhang, Q., Yang, K., Hu, Z., Qiu, J., & Cai, Y. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.016 · Cited by 216
Farraro, K. F., Kim, K. E., Woo, S. L.-Y., Flowers, J. R., & McCullough, M. B. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2013.12.003 · Cited by 214
Jin, W., Wu, G., Feng, H., Wang, W., Zhang, X., & Chu, P. K. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.049 · Cited by 211
In Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Shearier, E. R., Bowen, P. K., He, W., Drelich, A., Drelich, J., Goldman, J., & Zhao, F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00035 · Cited by 209
Zhang, X., Yuan, G., Niu, J., Fu, P., & Ding, W. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.02.002 · Cited by 200
History of implantable devices
Greatbatch, W., & Holmes, C. F. (1991) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/51.84185 · Cited by 191
Liu, D., Yang, D., Li, X., & Hu, S. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.08.003 · Cited by 191
Biodegradable bone implants in orthopedic applications: a review
Chandra, G., & Pandey, A. (2020) · Biocybernetics and Biomedical Engineering · doi:10.1016/j.bbe.2020.02.003 · Cited by 190
Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants
Uddin, M. S., Hall, C., & Murphy, P. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/5/053501 · Cited by 189
Shahin, M., Munir, K., Wen, C., & Li, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.007 · Cited by 189
Magnesium in clinical medicine
Touyz, R. (2004) · Frontiers in Bioscience · doi:10.2741/1316 · Cited by 188
Preparation and properties of high purity Mg–Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N., & Kainer, K. U. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.065 · Cited by 187
Metals for bone implants: safety, design, and efficacy
Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Haberland, C., Huff, S., Miller, M., Elahinia, M., & Dean, D. (2016) · Biomanufacturing Reviews · doi:10.1007/s40898-016-0001-2 · Cited by 184
Magnesium-Based Compression Screws: A Novelty in the Clinical Use of Implants
Seitz, J.-M., Lucas, A., & Kirschner, M. (2016) · JOM · doi:10.1007/s11837-015-1773-1 · Cited by 183
Biodegradable Magnesium Alloys Promote Angio‐Osteogenesis to Enhance Bone Repair
Han, H., Jun, I., Seok, H., Lee, K., Lee, K., Witte, F., Mantovani, D., Kim, Y., Glyn‐Jones, S., & Edwards, J. R. (2020) · Advanced Science · doi:10.1002/advs.202000800 · Cited by 180
Effect of Mn addition on corrosion properties of biodegradable Mg-4Zn-0.5Ca-xMn alloys
Cho, D. H., Lee, B. W., Park, J. Y., Cho, K. M., & Park, I. M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.244 · Cited by 178
Du, H., Wei, Z., Liu, X., & Zhang, E. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2010.10.015 · Cited by 171
Biomaterials in Cardiovascular Research: Applications and Clinical Implications
Jaganathan, S. K., Supriyanto, E., Murugesan, S., Balaji, A., & Asokan, M. K. (2014) · BioMed Research International · doi:10.1155/2014/459465 · Cited by 170
Wen, Z., Wu, C., Dai, C., & Yang, F. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.08.147 · Cited by 168
Pan, H., Pang, K., Cui, F., Ge, F., Man, C., Wang, X., & Cui, Z. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.06.022 · Cited by 167
Effect of magnesium ion on human osteoblast activity
He, L. Y., Zhang, X. M., Liu, B., Tian, Y., & Ma, W. H. (2016) · Brazilian Journal of Medical and Biological Research · doi:10.1590/1414-431x20165257 · Cited by 166
Laser Surface Engineering of Magnesium Alloys: A Review
Singh, A. K., & Harimkar, S. P. (2012) · JOM · doi:10.1007/s11837-012-0340-2 · Cited by 163
Chen, B., Lin, D.-L., Jin, L., Zeng, X.-Q., & Lu, C. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.10.199 · Cited by 162
Purnama, A., Hermawan, H., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.027 · Cited by 161
Stent development and local drug delivery
Regar, E., Sianos, G., & Serruys, P. W. (2001) · British Medical Bulletin · doi:10.1093/bmb/59.1.227 · Cited by 158
Smart implants in orthopedic surgery, improving patient outcomes: a review
Ledet, E. H., Liddle, B., Kradinova, K., & Harper, S. (2018) · Innovation and Entrepreneurship in Health · doi:10.2147/ieh.s133518 · Cited by 156
Osteogenesis, angiogenesis and immune response of Mg-Al layered double hydroxide coating on pure Mg
Cheng, S., Zhang, D., Li, M., Liu, X., Zhang, Y., Shi, Q., & Peng, F. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.07.014 · Cited by 156
Common Musculoskeletal Disorders in the Elderly: The Star Triad
Minetto, M. A., Giannini, A., McConnell, R., Busso, C., Torre, G., & Massazza, G. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm9041216 · Cited by 155
Peron, M., Torgersen, J., & Berto, F. (2017) · Metals · doi:10.3390/met7070252 · Cited by 151
Magnesium-based biodegradable alloys: Degradation, application, and alloying elements
Pogorielov, M., Husak, E., Solodivnik, A., & Zhdanov, S. (2017) · Interventional Medicine and Applied Science · doi:10.1556/1646.9.2017.1.04 · Cited by 150
Magnesium Alloys With Tunable Interfaces as Bone Implant Materials
Rahman, M., Dutta, N. K., & Choudhury, N. R. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00564 · Cited by 150
Rtimi, S., Dionysiou, D. D., Pillai, S. C., & Kiwi, J. T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.07.025 · Cited by 149
Drug-eluting stents: A multidisciplinary success story
Burt, H. M., & Hunter, W. L. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.01.014 · Cited by 143
Bio-Inspired Extreme Wetting Surfaces for Biomedical Applications
Shin, S., Seo, J., Han, H., Kang, S., Kim, H., & Lee, T. (2016) · Materials · doi:10.3390/ma9020116 · Cited by 143
Hybrid fracture fixation systems developed for orthopaedic applications: A general review
Li, T. X., Tang, N., Ngai, T., Wu, C. C., Ruan, Y. C., Huang, L., & Qin, L. (2018) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2018.06.006 · Cited by 136
Shuai, C., Cheng, Y. J., Yang, Y., Peng, S., Yang, W., & Qi, F. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.278 · Cited by 132
Abed, É., & Moreau, R. (2009) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00614.2008 · Cited by 131
Corrosion studies and microstructure of Mg−Zn−Ca alloys for biomedical applications
Abdel-Gawad, S. A., & Shoeib, M. A. (2018) · Surfaces and Interfaces · doi:10.1016/j.surfin.2018.11.011 · Cited by 131
Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective
Zhang, Z., Wang, L., Zeng, M.-Q., Zeng, R., Kannan, M. B., Lin, C., & Zheng, Y. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.03.005 · Cited by 128
Peng, K., Hsieh, M.-Y., Lin, C. T.-Y., Chen, C.-F., Lee, M. S.-S., Huang, Y., & Chang, P. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1131-7 · Cited by 127
Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
Demir, A. G., Monguzzi, L., & Previtali, B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.004 · Cited by 125
Kim, S., Jo, J.-H., Lee, S., Kang, M., Kim, H., Estrin, Y., Lee, J., Lee, J., & Koh, Y. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34718 · Cited by 124
Shuai, C., Liu, L., Zhao, M., Feng, P., Yang, Y., Guo, W., Gao, C., & Yuan, F. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.02.006 · Cited by 121
Yan, Y., Cao, H., Kang, Y., Yu, K., Xiao, T., Luo, J., Deng, Y., Fang, H., Xiong, H., & Dai, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.017 · Cited by 116
Li, J., Chen, L., Zhang, X., & Guan, S. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110607 · Cited by 112
In vitro assessment of bioactive coatings for neural implant applications
Massia, S. P., Holecko, M. M., & Ehteshami, G. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20009 · Cited by 109
Beiko, D. T., Knudsen, B. E., WATTERSON, J. D., Cadieux, P. A., Reid, G., & Denstedt, J. D. (2004) · The Journal of Urology · doi:10.1097/01.ju.0000125001.56045.6c · Cited by 107
Kumar, A., & Pandey, P. M. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.02.011 · Cited by 107
Baker, C. E., Moore‐Lotridge, S. N., Hysong, A. A., Posey, S. L., Robinette, J. P., Blum, D. M., Benvenuti, M. A., Cole, H., Egawa, S., Okawa, A., et al. (2018) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-018-9256-x · Cited by 106
Shi, H., Zhou, P., Li, J., Liu, C., & Wang, L. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.616845 · Cited by 104
Feng, B., Liu, G., Yang, P., Huang, S., Qi, D., Chen, P., Wang, C., Du, J., Zhang, S., & Liu, J. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.12.013 · Cited by 103
Mhaede, M., Pastorek, F., & Hadzima, B. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.03.023 · Cited by 101
Zhang, W., Li, M., Chen, Q., Hu, W., Zhang, W., & Wang, X. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.03.006 · Cited by 99
Enhanced osteogenic commitment of murine mesenchymal stem cells on graphene oxide substrate
Kim, J., Kim, H. D., Park, J., Lee, E., Kim, E., Lee, S. S., Yang, J.-K., Lee, Y., & Hwang, N. S.-Y. (2018) · Biomaterials Research · doi:10.1186/s40824-017-0112-8 · Cited by 99
Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid
Luo, X., & Cui, X. T. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.006 · Cited by 98
Zhao, C., Pan, F., Zhang, L., Pan, H., Song, K., & Tang, A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.012 · Cited by 98
Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R., et al. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.11.013 · Cited by 98
Li, M., He, P. L., Wu, Y., Zhang, Y., Xia, H., Zheng, Y., & Han, Y. (2016) · Scientific Reports · doi:10.1038/srep32323 · Cited by 97
Xiong, X., Zhang, Z., Ren, J., Jie, Z., Pan, X., Zhang, L., Gong, S., & Jin, S. (2018) · PLoS ONE · doi:10.1371/journal.pone.0193273 · Cited by 95
In vitro study of nanostructured diopside coating on Mg alloy orthopedic implants
Razavi, M., Fathi, M., Savabi, O., Vashaee, D., & Tayebi, L. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.04.039 · Cited by 94
Tan, L., Wang, Q., Lin, X. Y., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.020 · Cited by 93
Yang, C., Yuan, G., Zhang, J., Tang, Z., Zhang, X., & Dai, K. (2010) · Biomedical Materials · doi:10.1088/1748-6041/5/4/045005 · Cited by 92
Synthesis and characterization of Mg‐Ca‐Sr alloys for biodegradable orthopedic implant applications
Berglund, I. S., Brar, H. S., Dolgova, N. V., Acharya, A. P., Keselowsky, B. G., Sarntinoranont, M., & Manuel, M. V. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32721 · Cited by 92
Zai, W., Zhang, X., Su, Y., Man, H. C., Li, G., & Lian, J. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125919 · Cited by 92
Evolution of surface modification trends in bone related biomaterials: A review
Devgan, S., & Sidhu, S. S. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.05.039 · Cited by 91
Research on Mg-Zn-Ca Alloy as Degradable Biomaterial
Zhang, B. P., Wang, Y., & Geng, L. (2011) · InTech eBooks · doi:10.5772/23929 · Cited by 85
The investigation of bone fracture healing under intramembranous and endochondral ossification
Ghimire, S., Miramini, S., Edwards, G., Rotne, R., Xu, J., Ebeling, P., & Zhang, L. (2021) · Bone Reports · doi:10.1016/j.bonr.2020.100740 · Cited by 83
A novel biodegradable Mg–Nd–Zn–Zr alloy with uniform corrosion behavior in artificial plasma
Mao, L., Yuan, G., Wang, S., et al. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.08.012 · Cited by 79
Maradze, D., Musson, D. S., Zheng, Y., Cornish, J., Lewis, M. P., & Liu, Y. (2018) · Scientific Reports · doi:10.1038/s41598-018-28476-w · Cited by 79
Cheung, W., Chow, S. K., Sun, M.-H., Qin, L., & Leung, K. (2011) · Ultrasound in Medicine & Biology · doi:10.1016/j.ultrasmedbio.2010.11.016 · Cited by 77
Grewal, N. S., Batra, U., Kumar, K., & Mahapatro, A. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.08.003 · Cited by 77
Chen, W., Xu, K., Tao, B., Dai, L., Yu, Y., Mu, C., Shen, X., Hu, Y., He, Y., & Cai, K. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.043 · Cited by 76
Backes, M., Dingemans, S. A., Dijkgraaf, M. G. W., Berg, H., Dijkman, B. V., Hoogendoorn, J. M., Joosse, P., Ritchie, E., Roerdink, W. H., Schots, J. P. M., et al. (2017) · JAMA · doi:10.1001/jama.2017.19343 · Cited by 74
Antoniac, I., Miculescu, F., Cotruț, C. M., Ficai, A., Rau, J. V., Grosu, E., Antoniac, A., Tecu, C., & Cristescu, I. (2020) · Materials · doi:10.3390/ma13020263 · Cited by 73
Additive manufacturing of Mg alloys for biomedical applications: Current status and challenges
Raja, A., Gupta, P., Santra, T. S., & Jayaganthan, R. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2021.100276 · Cited by 65
Koleini, S., Idris, M. H., & Jafari, H. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.06.063 · Cited by 64
Wei, L., Li, J., Zhang, Y., & Lai, H. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122441 · Cited by 64
Ding, Y., Lin, J., Wen, C., Zhang, D., & Li, Y. (2016) · Scientific Reports · doi:10.1038/srep31990 · Cited by 63
Nie, X., Sun, X., Wang, C., & Yang, J. (2019) · Regenerative Biomaterials · doi:10.1093/rb/rbz033 · Cited by 63
Iqbal, N., Iqbal, S., Iqbal, T., Bakhsheshi‐Rad, H. R., Alsakkaf, A., Kamil, A., Kadir, M. R. A., Idris, M. H., & RAGHAV, H. B. (2020) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(19)65185-x · Cited by 61
Assessment of magnesium-based biomaterials: from bench to clinic
Razavi, M., & Huang, Y. (2019) · Biomaterials Science · doi:10.1039/c9bm00289h · Cited by 59
Polymeric nanobiocomposites for biomedical applications
Mozumder, M. S., Mairpady, A., & Mourad, A. I. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33633 · Cited by 57
Gai, X., Liu, C., Wang, G., Qin, Y., Fan, C., Liu, J., & Shi, Y. (2020) · Regenerative Biomaterials · doi:10.1093/rb/rbaa017 · Cited by 56
Prabhu, D. B., Gopalakrishnan, P., & Ravi, K. R. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152146 · Cited by 55
Corrosion Modeling of Magnesium and Its Alloys for Biomedical Applications: Review
Abdalla, M., Joplin, A., Elahinia, M., & Ibrahim, H. (2020) · Corrosion and Materials Degradation · doi:10.3390/cmd1020011 · Cited by 54
Uddin, M., Hall, C. J., Santos, V., et al. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111459 · Cited by 53
Laser texturing to control the wettability of materials
Riveiro, A., Pou, P., del Val, J., Comesaña, R., Arias-González, F., Lusquiños, F., Boutinguiza, M., Quintero, F., Badaoui, A., & Pou, J. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.09.065 · Cited by 52
Kitabata, H., Waksman, R., & Warnack, B. (2014) · Cardiovascular revascularization medicine · doi:10.1016/j.carrev.2014.01.011 · Cited by 51
Raphael, J., Southall, J. L., GNANADURAI, T. V., Treharne, G. J., & Kitas, G. D. (2002) · BMC Musculoskeletal Disorders · doi:10.1186/1471-2474-3-17 · Cited by 50
I-Chiang, C., Lee, S., Ming-Chang, W., Sun, C., & Jiang, C. (2012) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2012.697556 · Cited by 47
Chin, P. Y. Y., Cheok, Q., Głowacz, A., & Caesarendra, W. (2020) · Applied Sciences · doi:10.3390/app10093141 · Cited by 47
Sankar, M., Suwas, S., Subramanian, B., & Manivasagam, G. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.10.077 · Cited by 45
Telang, V. S., Pemmada, R., Thomas, V., Ramakrishna, S., Tandon, P., & Nanda, H. S. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2021.100264 · Cited by 44
Photo-controlled degradation of PLGA/Ti3C2 hybrid coating on Mg-Sr alloy using near infrared light
Liu, L., Huang, B., Liu, X., Yuan, W., Zheng, Y., Li, Z., Yeung, K., Zhu, S., Liang, Y., Cui, Z., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.08.013 · Cited by 42
Bone glue - The final frontier for fracture repair and implantable device stabilization
Norton, M., Kay, G. W., Brown, M. C., & Cochran, D. L. (2020) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2020.102647 · Cited by 40
A preliminary study on antibacterial mechanisms of silver ions implanted stainless steel
Chen, R., Ni, H., Zhang, H., Yue, G., Zhan, W., & Xiong, P. (2012) · Vacuum · doi:10.1016/j.vacuum.2012.05.025 · Cited by 38
Dutta, S., Devi, K. B., Gupta, S., Kundu, B., Balla, V. K., & Roy, M. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34127 · Cited by 38
Lin, S., Wang, Q., Yan, X., Ran, X., Linping, W., Zhou, J. G., Hu, T., & Wang, G. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.09.092 · Cited by 38
Saad, A. P. M., Prakoso, A. T., Sulong, M. A., Basri, H., Wahjuningrum, D. A., & Syahrom, A. (2019) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-018-01115-z · Cited by 37
Cited by
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
Kovacevic, S., Ali, W., Mandal, T. K., Martínez-Pañeda, E., & LLorca, J. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.034 · Cited by 31
Metadata
- Authors
- Bairagi, D., & Mandal, S.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2022-03
- Volume
- 10
- Issue
- 3
- Pages
- 627-669
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W3205068329
- Cited by
- 272
- References
- 210
- FWCI
- 8.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.