The DOI matches its Crossref record; 225 of the 225 references it cites were found in a registry or an index.
A review of various materials for additive manufacturing: Recent trends and processing issues
Open accessAbstract
Tremendous growth has been witnessed in the field of additive manufacturing (AM) technology over the last few decades. It offers a plethora of applications and is already being utilized in almost every sphere of life. Owing to inherent differences between each AM technique, newer fields of research consistently emerge and demand attention. Also, the innovative applications of AM open up newer challenges and thus avenues for focused attention. One such avenue is AM materials. Raw material plays an important role in determining the properties of fabricated part. The type and form of raw material largely depend on the type of AM fabricators. There is a restriction on material compatibility with most of the established AM techniques. This review aims to provide an overview of various aspects of AM materials highlighting the progress made especially over the past two decades.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-photon laser scanning fluorescence microscopy
Denk, W., Strickler, J. H., & Webb, W. W. (1990) · Science · doi:10.1126/science.2321027 · Cited by 9,488
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Engineering Aspects of Shape Memory Alloys
(1990) · Elsevier eBooks · doi:10.1016/c2013-0-04566-5 · Cited by 1,516
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Aerospace applications of shape memory alloys
Hartl, D. J., & Lagoudas, D. C. (2007) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1243/09544100jaero211 · Cited by 935
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Pagac, M., Hajnys, J., Ma, Q.-P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021) · Polymers · doi:10.3390/polym13040598 · Cited by 834
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Progress in additive manufacturing on new materials: A review
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.002 · Cited by 776
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Ashby, M. F., & Brechet, Y. J. M. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00441-5 · Cited by 701
Additive layered manufacturing: sectors of industrial application shown through case studies
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco Puchades, J., & Portolés Griñan, L. (2011) · International Journal of Production Research · doi:10.1080/00207540903479786 · Cited by 676
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering
(2006) · Wiley eBooks · doi:10.1002/3527608117 · Cited by 529
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Derekar, K. S. (2018) · Materials Science and Technology · doi:10.1080/02670836.2018.1455012 · Cited by 493
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Microstructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhang, Z., Demir, K. G., & Gu, G. X. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591541 · Cited by 392
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1779999 · Cited by 379
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
Laser Additive Manufacturing of High-Performance Materials
Gu, D. (2015) · Springer eBooks · doi:10.1007/978-3-662-46089-4 · Cited by 349
Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives
Bandyopadhyay, A., Traxel, K. D., Lang, M., Juhasz, M., Eliaz, N., & Bose, S. (2022) · Materials Today · doi:10.1016/j.mattod.2021.11.026 · Cited by 347
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 343
Costs, benefits, and adoption of additive manufacturing: a supply chain perspective
Thomas, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7973-6 · Cited by 342
Cunningham, R., Narra, S. P., Montgomery, C., Beuth, J., & Rollett, A. D. (2017) · JOM · doi:10.1007/s11837-016-2234-1 · Cited by 334
Advances in additive manufacturing of metal-based functionally graded materials
Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., Hosemann, P., & Beese, A. M. (2021) · International Materials Reviews · doi:10.1080/09506608.2019.1709354 · Cited by 334
Review on effect of heat input for wire arc additive manufacturing process
Rosli, N. A., Alkahari, M. R., Abdollah, M. F. B., Maidin, S., Ramli, F. R., & Herawan, S. G. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.02.002 · Cited by 322
Spoerk, M., Holzer, C., & Gonzalez‐Gutierrez, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48545 · Cited by 317
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Chatham, C. A., Long, T. E., & Williams, C. B. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.003 · Cited by 305
Effects of processing on microstructure and properties of SLS Nylon 12
Zarringhalam, H., Hopkinson, N., Kamperman, N. F., & de Vlieger, J. J. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.084 · Cited by 295
Metallic additive manufacturing: state-of-the-art review and prospects
Vayre, B., Vignat, F., & Villeneuve, F. (2012) · Mechanics & Industry · doi:10.1051/meca/2012003 · Cited by 294
Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.913400 · Cited by 290
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
Mirzababaei, S., & Pasebani, S. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3030082 · Cited by 290
Additive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278
Peeters, P., Bosiers, M., Verbist, J., Deloose, K., & Heublein, B. (2005) · Journal of Endovascular Therapy · doi:10.1583/04-1349r.1 · Cited by 275
An exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Ahn, D.-G. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0048-9 · Cited by 268
Charoo, N. A., Barakh Ali, S. F., Mohamed, E. M., Kuttolamadom, M. A., Ozkan, T., Khan, M. A., & Rahman, Z. (2020) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2020.1764027 · Cited by 268
Biomedical titanium alloys and their additive manufacturing
Hao, Y., Li, S., & Yang, R. (2016) · Rare Metals · doi:10.1007/s12598-016-0793-5 · Cited by 267
Microstructure modelling for metallic additive manufacturing: a review
Tan, J. H. K., Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1677345 · Cited by 266
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Chua, C. K., & Leong, K. F. (2014) · WORLD SCIENTIFIC eBooks · doi:10.1142/9008 · Cited by 261
Advances in selective laser sintering of polymers
Han, W., Kong, L., & Xu, M. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9096 · Cited by 254
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
A review on metal additive manufacturing for intricately shaped aerospace components
Madhavadas, V., Srivastava, D., Chadha, U., Aravind Raj, S., Sultan, M. T. H., Shahar, F. S., & Shah, A. U. M. (2022) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2022.07.005 · Cited by 251
Rafieazad, M., Ghaffari, M., Nemani, A. V., & Nasiri, A. M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04393-8 · Cited by 247
Shape memory alloy actuators in smart structures: Modeling and simulation
Seelecke, S., & Mu¨ller, I. (2004) · Applied Mechanics Reviews · doi:10.1115/1.1584064 · Cited by 246
Guo, J., Zhou, Y., Liu, C., Wu, Q., Chen, X., & Lu, J. (2016) · Materials · doi:10.3390/ma9100823 · Cited by 241
Suwanpreecha, C., & Manonukul, A. (2022) · Metals · doi:10.3390/met12030429 · Cited by 241
Ikram, R., Jan, B. M., & Ahmad, W. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.050 · Cited by 233
Young, Z. A., Guo, Q., Parab, N. D., Zhao, C., Qu, M., Escano, L. I., Fezzaa, K., Everhart, W., Sun, T., & Chen, L. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101438 · Cited by 220
A review on in situ monitoring technology for directed energy deposition of metals
Tang, Z.-J., Liu, W.-W., Wang, Y.-W., Saleheen, K. M., Liu, Z.-C., Peng, S.-T., Zhang, Z., & Zhang, H.-C. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05569-3 · Cited by 219
Lores, A., Azurmendi, N., Agote, Í., & Zuza, E. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1669299 · Cited by 215
Tailoring Selective Laser Melting Process Parameters for NiTi Implants
Bormann, T., Schumacher, R., Müller, B., Mertmann, M., & de Wild, M. (2012) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-012-0318-9 · Cited by 212
Understanding Additive Manufacturing
Gebhardt, A. (2011) · Understanding Additive Manufacturing · doi:10.3139/9783446431621.fm · Cited by 209
Redesign and cost estimation of rapid manufactured plastic parts
Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011065704 · Cited by 205
Arc Welding Processes for Additive Manufacturing: A Review
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018) · Transactions on Intelligent Welding Manufacturing · doi:10.1007/978-981-10-5355-9_1 · Cited by 205
Encyclopedia of Materials: Metals and Alloys
(2022) · Elsevier eBooks · doi:10.1016/c2018-1-03185-6 · Cited by 202
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Bär, F., Berger, L., Jauer, L., Kurtuldu, G., Schäublin, R., Schleifenbaum, J. H., & Löffler, J. F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.056 · Cited by 198
Dadbakhsh, S., Speirs, M., Van Humbeeck, J., & Kruth, J.-P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.209 · Cited by 196
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
3D Printing and Additive Manufacturing Technologies
(2019) · Springer eBooks · doi:10.1007/978-981-13-0305-0 · Cited by 190
Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants
Uddin, M. S., Hall, C., & Murphy, P. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/5/053501 · Cited by 189
Review and perspectives: shape memory alloy composite systems
Lester, B. T., Baxevanis, T., Chemisky, Y., & Lagoudas, D. C. (2015) · Acta Mechanica · doi:10.1007/s00707-015-1433-0 · Cited by 189
Srivastava, M., Rathee, S., Maheshwari, S., Noor Siddiquee, A., & Kundra, T. K. (2019) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408436.2018.1490250 · Cited by 188
Self-citationA review of additive manufacturing of cermets
Aramian, A., Razavi, N., Sadeghian, Z., & Berto, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101130 · Cited by 186
Directed energy deposition of metals: processing, microstructures, and mechanical properties
Li, S., Kumar, P., Chandra, S., & Ramamurty, U. (2022) · International Materials Reviews · doi:10.1080/09506608.2022.2097411 · Cited by 185
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Mahamood, R. M., & Akinlabi, E. T. (2017) · 3D Printing · doi:10.4018/978-1-5225-1677-4.ch008 · Cited by 183
Review of additive manufacturing methods for high-performance ceramic materials
Wang, J.-C., Dommati, H., & Hsieh, S.-J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03669-3 · Cited by 181
Additive manufacturing: recent trends, applications and future outlooks
Srivastava, M., & Rathee, S. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00229-8 · Cited by 178
Self-citationThermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Transparency Built‐in: Energy Consumption and Cost Estimation for Additive Manufacturing
Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., Rosamond, E., & Hague, R. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00512.x · Cited by 177
Recent developments in metal additive manufacturing
Bandyopadhyay, A., Zhang, Y., & Bose, S. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.001 · Cited by 175
Thermodynamics-guided alloy and process design for additive manufacturing
Sun, Z., Ma, Y., Ponge, D., Zaefferer, S., Jägle, E. A., Gault, B., Rollett, A. D., & Raabe, D. (2022) · Nature Communications · doi:10.1038/s41467-022-31969-y · Cited by 174
Process monitoring for material extrusion additive manufacturing: a state-of-the-art review
Oleff, A., Küster, B., Stonis, M., & Overmeyer, L. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00192-4 · Cited by 173
Towards a sustainable and economic selection of part candidates for additive manufacturing
Lindemann, C., Reiher, T., Jahnke, U., & Koch, R. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0179 · Cited by 168
Characterizing short-fiber-reinforced composites produced using additive manufacturing
Ivey, M. A., Melenka, G. W., Carey, J. P., & Ayranci, C. (2017) · Advanced Manufacturing Polymer & Composites Science · doi:10.1080/20550340.2017.1341125 · Cited by 167
History of Additive ManufacturingPreprint
Wohlers, T. T., Gornet, T. J., Mostow, N., Campbell, I. M., Diegel, O., Kowen, J., Huff, R., Stucker, B. E., Fidan, I., Doukas, A., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4474824 · Cited by 164
Laser Powder Bed Fusion of Stainless Steel Grades: A Review
Zitelli, C., Folgarait, P., & Schino, A. D. (2019) · Metals · doi:10.3390/met9070731 · Cited by 162
3D printed architected lattice structures by material jetting
Mora, S. A., Pugno, N. M., & Misseroni, D. (2022) · Materials Today · doi:10.1016/j.mattod.2022.05.008 · Cited by 162
Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys
Ding, Y., Muñiz-Lerma, J. A., Trask, M., Chou, S. C., Walker, A., & Brochu, M. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.214 · Cited by 161
Laser-based additively manufactured polymers: a review on processes and mechanical models
Brighenti, R., Cosma, M. P., Marșavina, L., Spagnoli, A., & Terzano, M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05254-6 · Cited by 159
Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes
Laureijs, R. E., Roca, J. B., Narra, S. P., Montgomery, C., Beuth, J., & Fuchs, E. R. H. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035420 · Cited by 159
INTRODUCTION, CLASSIFICATION AND APPLICATIONS OF SMART MATERIALS: AN OVERVIEW
Kamila (2013) · American Journal of Applied Sciences · doi:10.3844/ajassp.2013.876.880 · Cited by 157
Qian, B., & Shen, Z. J. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.08.004 · Cited by 156
Wang, X., Kustov, S., & Humbeeck, J. V. (2018) · Materials · doi:10.3390/ma11091683 · Cited by 156
Shape Memory Alloy Based Morphing Aerostructures
Calkins, F. T., & Mabe, J. H. (2010) · Journal of Mechanical Design · doi:10.1115/1.4001119 · Cited by 153
Energy consumption model of Binder-jetting additive manufacturing processes
Xu, X. S., Meteyer, S., Perry, N., et al. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.937013 · Cited by 152
Smart materials: a review of capabilities and applications
Bogue, R. W. (2014) · Assembly Automation · doi:10.1108/aa-10-2013-094 · Cited by 148
A review on additive manufacturing and its way into the oil and gas industry
Sireesha, M., Lee, J., Kiran, A. S., Babu, V. J., Kee, B. B. T., & Ramakrishna, S. (2018) · RSC Advances · doi:10.1039/c8ra03194k · Cited by 147
A robotic cell for performing sheet lamination-based additive manufacturing
Bhatt, P. M., Kabir, A. M., Peralta, M., Bruck, H. A., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.002 · Cited by 146
4D Printing: Future Insight in Additive Manufacturing
Zafar, M. Q., & Zhao, H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00441-w · Cited by 146
Dávila, J. L., Neto, P. I., Noritomi, P. Y., Coelho, R. T., & da Silva, J. V. L. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06062-7 · Cited by 144
Additive manufacturing methods: techniques, materials, and closed-loop control applications
Rivera, F. J. M., & Arciniegas, A. J. R. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05663-6 · Cited by 143
A review of binder jet process parameters; powder, binder, printing and sintering condition
Dini, F., Ghaffari, S. A., Javadpour, J., Rezaie, H. R., & Marjan, S. (2019) · Metal Powder Report · doi:10.1016/j.mprp.2019.05.001 · Cited by 142
Adopting additive manufacturing in SMEs: exploring the challenges and solutions
Martinsuo, M. M., & Luomaranta, T. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-02-2018-0030 · Cited by 139
Blinn, B., Klein, M., Gläßner, C., Smaga, M., Aurich, J. C., & Beck, T. (2018) · Metals · doi:10.3390/met8040220 · Cited by 137
Shi, J., & Wang, Y. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04730-3 · Cited by 137
A comprehensive review of ultrasonic additive manufacturing
Hehr, A., & Norfolk, M. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2019-0056 · Cited by 127
Achillas, C., Tzetzis, D., & Raimondo, M. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1282645 · Cited by 126
Zerankeshi, M. M., Bakhshi, R., & Alizadeh, R. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00191 · Cited by 126
Li, H., Song, L., Sun, J., Ma, J., & Shen, Z. J. (2018) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1080/17436753.2018.1447834 · Cited by 121
Additive manufacturing cost estimation models—a classification review
Kadir, A. Z. A., Yusof, Y., & Wahab, M. S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05262-5 · Cited by 121
Additive Manufacturing of Emerging Materials
(2018) · Springer eBooks · doi:10.1007/978-3-319-91713-9 · Cited by 121
3D and 4D Printing of Polymer Nanocomposite Materials
(2019) · Elsevier eBooks · doi:10.1016/c2018-0-01194-9 · Cited by 120
Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing
Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 118
Selective laser melting of aluminum alloys
Aboulkhair, N. T., Everitt, N. M., Maskery, I., Ashcroft, I., & Tuck, C. J. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.63 · Cited by 116
Tong, J., Bowen, C., Persson, J., & Plummer, A. R. (2016) · Materials Science and Technology · doi:10.1080/02670836.2016.1172787 · Cited by 115
Additive manufacturing of WC-20Co components by 3D gel-printing
Zhang, X., Guo, Z., Chen, C., & Yang, W. (2017) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2017.10.005 · Cited by 113
Niaki, M. K., Nonino, F., Palombi, G., & Torabi, S. A. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-05-2018-0131 · Cited by 111
3D printing: a critical review of current development and future prospects
Ali, M. H., Batai, S., & Sarbassov, D. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2018-0293 · Cited by 108
Rathee, S., Srivastava, M., Pandey, P. M., Mahawar, A., & Shukla, S. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2021.08.003 · Cited by 100
Self-citationMusa, L., Nitiyah, K. K., Rahim, S. Z. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Kanani, A. Y., & Azmi, A. A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.057 · Cited by 100
Consumer additive manufacturing or 3D printing adoption: an exploratory study
Steenhuis, H., & Pretorius, L. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-01-2016-0002 · Cited by 99
Vat Photopolymerization 3D Printing of Nanocomposites: A Literature Review
Medellin, A., Du, W., Miao, G., Zou, J. T., Pei, Z., & Ma, C. (2019) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4044288 · Cited by 99
Direct laser additive manufacturing of high performance oxide ceramics: A state-of-the-art review
Pfeiffer, S., Florio, K., Puccio, D., Grasso, M., Colosimo, B. M., Aneziris, C. G., Wegener, K., & Graule, T. J. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.05.035 · Cited by 99
Iebba, M., Astarita, A., Mistretta, D., Colonna, I., Liberini, M., Scherillo, F., Pirozzi, C., Borrelli, R., Franchitti, S., & Squillace, A. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2796-2 · Cited by 96
‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review
Li, W., Cao, C., Wang, G., Wang, F., Xu, Y., & Yang, X. (2019) · Science and Technology of Welding & Joining · doi:10.1080/13621718.2019.1603851 · Cited by 92
Morrow, B., Lienert, T. J., Knapp, C., Sutton, J. O., Brand, M. J., Pacheco, R. M., Livescu, V., Carpenter, J. S., & Gray, G. T., III (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4661-9 · Cited by 90
4D printing – revolution or fad?
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-02-2014-014 · Cited by 89
Additive Manufacturing of Shape Memory Alloys
Humbeeck, J. V. (2018) · Shape Memory and Superelasticity · doi:10.1007/s40830-018-0174-z · Cited by 89
From 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
A feasibility study on process monitoring and control in vat photopolymerization of ceramics
Hafkamp, T., van Baars, G. E., de Jager, B., & Etman, P. (2018) · Mechatronics · doi:10.1016/j.mechatronics.2018.02.006 · Cited by 88
Mehrpouya, M., Gisario, A., Rahimzadeh, A., Nematollahi, M., Baghbaderani, K. S., & Elahinia, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04596-z · Cited by 88
Mooney, B., & Kourousis, K. I. (2020) · Metals · doi:10.3390/met10091273 · Cited by 87
Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook
Zhang, D., Lim, W. Y., Duran, S. S. F., Loh, X. J., & Suwardi, A. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02553 · Cited by 86
Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint
Majumdar, T., Eisenstein, N., Frith, J. E., Cox, S. C., & Birbilis, N. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800172 · Cited by 85
Lim, J.-S., Oh, W. Z., Lee, C.-M., & Kim, D.-H. (2021) · Scientific Reports · doi:10.1038/s41598-021-03622-z · Cited by 84
Research progress of ceramic matrix composite parts based on additive manufacturing technology
Lu, Z., Cao, J., Song, Z., Li, D., & Lu, B. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1607759 · Cited by 82
Functionally graded structures of refractory metals by wire arc additive manufacturing
Marinelli, G., Martina, F., Lewtas, H., Hancock, D., Ganguly, S., & Williams, S. (2019) · Science and Technology of Welding & Joining · doi:10.1080/13621718.2019.1586162 · Cited by 81
A review of powder deposition in additive manufacturing by powder bed fusion
Avrampos, P., & Vosniakos, G.-C. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.021 · Cited by 81
Review on direct metal laser deposition manufacturing technology for the Ti-6Al-4V alloy
Sibisi, P. N., Popoola, A. P. I., Arthur, N. K. K., & Pityana, S. L. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04851-3 · Cited by 78
3D Printing and Biofabrication
(2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3 · Cited by 78
Rapid manufacturing — the technologies and applications of rapid prototyping and rapid tooling
Edwards, K. L. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00077-2 · Cited by 77
Bournias-Varotsis, A., Friel, R. J., Harris, R. A., & Engstrøm, D. S. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.03.027 · Cited by 77
Fast Prediction and Validation of Part Distortion in Selective Laser Melting
Li, C., Fu, C. H., Guo, Y. B., & Fang, F. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.042 · Cited by 76
Direct laser sintered WC-10Co/Cu nanocomposites
Gu, D., & Shen, Y. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.12.028 · Cited by 75
Manufacture of biodegradable magnesium alloy by high speed friction stir processing
Qin, D., Shen, H., Shen, Z., Chen, H., & Fu, L. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.09.019 · Cited by 71
Niu, X., Singh, S., Garg, A., Singh, H., Panda, B., Peng, X., & Zhang, Q. (2018) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-019-0526-1 · Cited by 69
Sekar, V., Fouladi, M. H., Namasivayam, S., & Sivanesan, S. (2019) · Journal of Engineering · doi:10.1155/2019/4546863 · Cited by 65
Additive Manufacturing – Developments in Training and Education
Pei, E., Monzón, M., & Bernard, A. L. (2018) · Springer eBooks · doi:10.1007/978-3-319-76084-1 · Cited by 65
A Study on State of the Art Technology of Laminated Object Manufacturing (LOM)
Mekonnen, B. G., Bright, G., & Walker, A. (2016) · Lecture notes in mechanical engineering · doi:10.1007/978-81-322-2740-3_21 · Cited by 63
State of art review on sustainable additive manufacturing
Agrawal, R., & Vinodh, S. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2018-0085 · Cited by 63
Additive manufacturing for steels: a review
Zadi-Maad, A., Rohib, R., & Irawan, A. P. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/285/1/012028 · Cited by 61
Powder bed fusion additive layer manufacturing of titanium alloys
Sabzi, H. E. (2019) · Materials Science and Technology · doi:10.1080/02670836.2019.1602974 · Cited by 61
Progress in selective laser sintering using metallic powders: A review
Singh, S., Sharma, V. S., & Sachdeva, A. K. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000136 · Cited by 60
Binder jetting additive manufacturing of copper foam structures
Miyanaji, H., Ma, D., Atwater, M. A., Darling, K. A., Hammond, V. H., & Williams, C. B. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100960 · Cited by 60
Updates in Advanced Lithography
Hosaka, S. (2013) · InTech eBooks · doi:10.5772/3348 · Cited by 59
Metadata
- Authors
- Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 21
- Pages
- 2612-2641
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4306751866
- Cited by
- 311
- References
- 225
- FWCI
- 15.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.