The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications
Open accessAbstract
Abstract Directed energy deposition (DED) is a branch of additive manufacturing (AM) processes in which a feedstock material in the form of powder or wire is delivered to a substrate on which an energy source such as laser beam, electron beam, or plasma/electric arc is simultaneously focused, thus forming a small melt pool and continuously depositing material, layer by layer. DED has several unique advantages compared to other AM processes, such as site-specific deposition and repair, alloy design, and three-dimensional printing of complex shapes. Herein, recent advances as well as the main aspects governing laser-material interactions during the DED process, melt pool thermal behavior, advanced in situ monitoring, and interaction mechanisms are critically reviewed. The most critical processing variables and their influence on the deposited material properties, along with defect formation mechanisms and characterization techniques, are also identified and discussed. An overview of high-end applications, current challenges associated with DED processing, and a critical outlook of the technology are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
MacLeod, H. A. (2001) · CRC Press eBooks · doi:10.1201/9781420033236 · Cited by 3,121
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Rebitzer, G., Ekvall, T., Frischknecht, R., Hunkeler, D., Norris, G., Rydberg, T., Schmidt, W.-P., Suh, S., Weidema, B. P., & Pennington, D. W. (2004) · Environment International · doi:10.1016/j.envint.2003.11.005 · Cited by 2,753
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Residual stress. Part 1 – Measurement techniques
Withers, P. J., & Bhadeshia, H. K. D. H. (2001) · Materials Science and Technology · doi:10.1179/026708301101509980 · Cited by 1,620
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
MacLeod, H. A., & Macleod, H. A. (2010) · CRC Press eBooks · doi:10.1201/9781420073034 · Cited by 1,294
Disruptive technologies: Advances that will transform life, business, and the global economy
Manyika, J., Chui, M., Bughin, J., Dobbs, R., Bisson, P., & Marrs, A. (2013) · Cited by 1,237
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Self-citationCorrosion of Metallic Biomaterials: A Review
Eliaz, N. (2019) · Materials · doi:10.3390/ma12030407 · Cited by 984
Self-citationQiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Introduction to the Characterization of Residual Stress by Neutron Diffraction
Hutchings, M. T., Withers, P. J., Holden, T. M., & Lorentzen, T. (2005) · CRC Press eBooks · doi:10.1201/9780203402818 · Cited by 752
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Critical instability at moving keyhole tip generates porosity in laser melting
Zhao, C., Parab, N. D., Li, X., Fezzaa, K., Tan, W., Rollett, A. D., & Sun, T. (2020) · Science · doi:10.1126/science.abd1587 · Cited by 673
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Handbook of Residual Stress and Deformation of Steel
Totten, G. E., Howes, M. K., & 井上, 達. (2001) · Cited by 661
Comparison of density measurement techniques for additive manufactured metallic parts
Spierings, A. B., Schneider, M., & Eggenberger, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156504 · Cited by 613
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Denlinger, E. R., Heigel, J. C., Michaleris, P., & Palmer, T. A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.030 · Cited by 531
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Characterization of stainless steel parts by Laser Metal Deposition Shaping
Zhang, K., Wang, S., Liu, W., & Shang, X. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.006 · Cited by 485
Heigel, J. C., Michaleris, P., & Reutzel, E. W. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.10.003 · Cited by 438
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Szost, B. A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., & Jarvis, D. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.09.115 · Cited by 393
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Wire Arc Additive Manufacturing of Stainless Steels: A Review
Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., & Liu, W. (2020) · Applied Sciences · doi:10.3390/app10051563 · Cited by 388
Sun, R., Li, L., Zhu, Y., Guo, W., Peng, P., Cong, B., Sun, J., Che, Z., Li, B., Guo, C., et al. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.353 · Cited by 382
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
Sterling, A. J., Torries, B., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.026 · Cited by 372
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
Manvatkar, V., De, A., & DebRoy, T. (2014) · Journal of Applied Physics · doi:10.1063/1.4896751 · Cited by 362
Hot isostatic pressing of IN718 components manufactured by selective laser melting
Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., & Hoyer, K.-P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.006 · Cited by 353
Solidification in direct metal deposition by LENS processing
Hofmeister, W., & Griffith, M. (2001) · JOM · doi:10.1007/s11837-001-0066-z · Cited by 351
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M. A., & Bian, L. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.001 · Cited by 338
The effect of powder oxidation on defect formation in laser additive manufacturing
Leung, C. L. A., Marussi, S., Towrie, M., Atwood, R. C., Withers, P. J., & Lee, P. D. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.027 · Cited by 336
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Balla, V. K., Banerjee, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.021 · Cited by 333
Self-citationReview: The Impact of Metal Additive Manufacturing on the Aerospace Industry
Mohd Yusuf, S., Cutler, S., & Gao, N. (2019) · Metals · doi:10.3390/met9121286 · Cited by 332
Understanding thermal behavior in the LENS process
Griffith, M. L., Schlienger, M. E., Harwell, L. D., Oliver, M. S., Baldwin, M. D., Ensz, M. T., Essien, M., Brooks, J., Robino, C. V., Smugeresky, J. E., et al. (1999) · Materials & Design · doi:10.1016/s0261-3069(99)00016-3 · Cited by 327
Surface modification of biomaterials and biomedical devices using additive manufacturing
Bose, S., Robertson, S. F., & Bandyopadhyay, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.003 · Cited by 305
Self-citationLaser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
Wysocki, B., Maj, P., Sitek, R., Buhagiar, J., Kurzydłowski, K., & Święszkowski, W. (2017) · Applied Sciences · doi:10.3390/app7070657 · Cited by 300
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
LeBrun, T., Nakamoto, T., Horikawa, K., & Kobayashi, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.026 · Cited by 298
Zhang, F., Levine, L. E., Allen, A. J., Stoudt, M. R., Lindwall, G., Lass, E. A., Williams, M. E., Idell, Y., & Campbell, C. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.017 · Cited by 291
Manvatkar, V., De, A., & DebRoy, T. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000701 · Cited by 282
Khanzadeh, M., Chowdhury, S., Tschopp, M. A., Doude, H. R., Marufuzzaman, M., & Bian, L. (2019) · IISE Transactions · doi:10.1080/24725854.2017.1417656 · Cited by 278
Reichardt, A., Dillon, R. P., Borgonia, J. P., Shapiro, A. A., McEnerney, B. W., Momose, T., & Hosemann, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.016 · Cited by 275
Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
Zhang, J., Wang, X., Paddea, S., & Zhang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.141 · Cited by 248
Zheng, B., Zhou, Y., Smugeresky, J. E., Schoenung, J. M., & Lavernia, E. J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9557-7 · Cited by 245
Self-citationOnuike, B., Heer, B., & Bandyopadhyay, A. K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.007 · Cited by 232
Self-citationBandyopadhyay, A., & Traxel, K. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.024 · Cited by 231
Self-citationGriffith, M. L., Ensz, M. T., Puskar, J. D., Robino, C. V., Brooks, J. A., Philliber, J. A., Smugeresky, J. E., & Hofmeister, W. H. (2000) · MRS Proceedings · doi:10.1557/proc-625-9 · Cited by 225
A review on in situ monitoring technology for directed energy deposition of metals
Tang, Z.-J., Liu, W.-W., Wang, Y.-W., Saleheen, K. M., Liu, Z.-C., Peng, S.-T., Zhang, Z., & Zhang, H.-C. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05569-3 · Cited by 219
Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
Balla, V. K., Bose, S., & Bandyopadhyay, A. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02202.x · Cited by 217
Self-citationMethods for Rapid Pore Classification in Metal Additive Manufacturing
Snell, R., Tammas-Williams, S., Chechik, L., Lyle, A., Hernández-Nava, E., Boig, C., Panoutsos, G., & Todd, I. (2020) · JOM · doi:10.1007/s11837-019-03761-9 · Cited by 211
Vasinonta, A., Beuth, J., & Griffith, M. L. (2006) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2335852 · Cited by 209
Characteristics of laser aided direct metal/material deposition process for tool steel
Choi, J. R., & Chang, Y. (2004) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2004.08.014 · Cited by 209
Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy
Guo, W., Sun, R., Song, B., et al. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.06.020 · Cited by 204
(2015) · Johnson Matthey Technology Review · doi:10.1595/205651315x688406 · Cited by 191
Porosity testing methods for the quality assessment of selective laser melted parts
Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. J. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.054 · Cited by 190
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.055 · Cited by 190
First demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186
Self-citationWolff, S. J., Lin, S., Faierson, E. J., Liu, W. K., Wagner, G. J., & Cao, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.027 · Cited by 185
Shim, D.-S., Baek, G.-Y., Seo, J.-S., Shin, G.-Y., Kim, K.-P., & Lee, K.-Y. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.07.001 · Cited by 172
Pinkerton, A. J. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/23/012 · Cited by 165
On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing
Carpenter, K., & Tabei, A. (2020) · Materials · doi:10.3390/ma13020255 · Cited by 161
Introduction to Additive Manufacturing
Bourell, D. L., & Wohlers, T. (2020) · Additive Manufacturing Processes · doi:10.31399/asm.hb.v24.a0006555 · Cited by 158
In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
Wolff, S. J., Wu, H., Parab, N. D., Zhao, C., Ehmann, K. F., Sun, T., & Cao, J. (2019) · Scientific Reports · doi:10.1038/s41598-018-36678-5 · Cited by 157
Melia, M., Nguyen, H.-D. A., Rodelas, J., & Schindelholz, E. J. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.02.029 · Cited by 141
Yamaguchi, H., Fergani, O., & Wu, P. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.084 · Cited by 139
Le, V. T., Paris, H., & Mandil, G. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.06.003 · Cited by 133
Shah, K., Pinkerton, A. J., Salman, A., & Li, L. (2010) · Materials and Manufacturing Processes · doi:10.1080/10426914.2010.480999 · Cited by 132
Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method
Liu, Y., Liu, C., Liu, W., Ma, Y., Tang, S., Liang, C., Cai, Q., & Zhang, C. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.10.030 · Cited by 131
Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys
Thapliyal, S. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab4dd4 · Cited by 124
Review on electron beam based additive manufacturing
Negi, S., Nambolan, A., Kapil, S., Joshi, P., Manivannan, R., Karunakaran, K. P., & Bhargava, P. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2019-0182 · Cited by 120
A simple model of powder catchment in coaxial laser cladding
Lin, J. (1999) · Optics & Laser Technology · doi:10.1016/s0030-3992(99)00046-8 · Cited by 117
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J., & Li, L. (2004) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440504323055498 · Cited by 101
Li, X., Siahpour, S., Lee, J., Wang, Y., & Shi, J. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.05.093 · Cited by 97
Pokharel, R., Patra, A., Brown, D. W., Clausen, B., Vogel, S. C., & Gray, G. T., III (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.06.005 · Cited by 95
Cai, X., Malcolm, A. A., Wong, B. S., & Fan, Z. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1112412 · Cited by 91
Yao, Y., Huang, Y., Chen, B., Tan, C., Su, Y., & Feng, J. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.03.011 · Cited by 91
Daniel Weisz-patrault, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100990 · Cited by 86
Feenstra, D., Molotnikov, A., & Birbilis, N. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109342 · Cited by 83
Kriczky, D. A., Irwin, J., Reutzel, E. W., Michaleris, P., Nassar, A. R., & Craig, J. E. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.021 · Cited by 75
Kistler, N. A., Nassar, A. R., Reutzel, E. W., Corbin, D. J., & Beese, A. M. (2017) · Journal of Laser Applications · doi:10.2351/1.4979702 · Cited by 74
Combinatorial Alloy Design by Laser Additive Manufacturing
Knoll, H., Ocylok, S., Weisheit, A., Springer, H., Jägle, E. A., & Raabe, D. (2016) · steel research international · doi:10.1002/srin.201600416 · Cited by 70
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
Prabhu, A. W., Vincent, T., Chaudhary, A., Zhang, W., & Babu, S. S. (2015) · Science and Technology of Welding & Joining · doi:10.1179/1362171815y.0000000050 · Cited by 69
Convolutional Neural Network for geometric deviation prediction in Additive Manufacturing
Zhu, Z., Ferreira, K., Anwer, N., Mathieu, L., Guo, K., & Qiao, L. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.03.108 · Cited by 68
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718
Zhong, C., Pirch, N., Gasser, A., Poprawe, R., & Schleifenbaum, J. H. (2017) · Metals · doi:10.3390/met7100443 · Cited by 64
Eliaz, N., Foucks, N. D., Geva, D., Oren, S., Shriki, N., Vaknin, D., Fishman, D., & Levi, O. (2020) · Materials · doi:10.3390/ma13184171 · Cited by 47
Self-citationA New Ti-5Ag Alloy for Customized Prostheses by Three-dimensional Printing (3DP™)
Hong, S.-B., Eliaz, N., Leisk, G. G., Sachs, E. M., Latanision, R. M., & Allen, S. M. (2001) · Journal of Dental Research · doi:10.1177/00220345010800030301 · Cited by 44
Self-citationMiCLAD as a platform for real-time monitoring and machine learning in laser metal deposition
Ertveldt, J., Guillaume, P., & Helsen, J. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.09.164 · Cited by 40
Powder catchment in laser metal deposition
Siva Prasad, H., Brueckner, F., & Kaplan, A. F. H. (2019) · Journal of Laser Applications · doi:10.2351/1.5096130 · Cited by 37
Naturally architected microstructures in structural materials via additive manufacturing
Traxel, K. D., & Bandyopadhyay, A. K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101243 · Cited by 27
Self-citation
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Review on field assisted metal additive manufacturing
Tan, C., Li, R., Su, J., Du, D., Du, Y., Attard, B., Chew, Y., Zhang, H., Lavernia, E. J., Fautrelle, Y., et al. (2023) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2023.104032 · Cited by 377
Self-citationAlloy design via additive manufacturing: Advantages, challenges, applications and perspectives
Bandyopadhyay, A., Traxel, K. D., Lang, M., Juhasz, M., Eliaz, N., & Bose, S. (2022) · Materials Today · doi:10.1016/j.mattod.2021.11.026 · Cited by 347
Self-citationKanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Self-citation
Metadata
- Authors
- Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-10
- Volume
- 49
- Pages
- 271-295
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3167891248
- Cited by
- 1,371
- References
- 112
- FWCI
- 68.33
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.