The DOI matches its Crossref record; 152 of the 152 references it cites were found in a registry or an index.
Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration
Open accessAbstract
The goal of a biomaterial is to support the bone tissue regeneration process at the defect site and eventually degrade in situ and get replaced with the newly generated bone tissue. Nanocomposite biomaterials are a relatively new class of materials that incorporate a biopolymeric and biodegradable matrix structure with bioactive and easily resorbable fillers which are nano-sized. This article is a review of a few polymeric nanocomposite biomaterials which are potential candidates for bone tissue regeneration. These nanocomposites have been broadly classified into two groups viz. natural and synthetic polymer based. Natural polymer-based nanocomposites include materials fabricated through reinforcement of nanoparticles and/or nanofibers in a natural polymer matrix. Several widely used natural biopolymers, such as chitosan (CS), collagen (Col), cellulose, silk fibroin (SF), alginate, and fucoidan, have been reviewed regarding their present investigation on the incorporation of nanomaterial, biocompatibility, tissue regeneration, and biodegradation. Synthetic polymer-based nanocomposites that have been covered in this review include polycaprolactone (PCL), poly (lactic-co-glycolic) acid (PLGA), polyethylene glycol (PEG), poly (lactic acid) (PLA), and polyurethane (PU) based nanocomposites. An array of nanofillers, such as nano hydroxyapatite (nHA), nano zirconia (nZr), nano silica (nSi), silver nano particles (AgNPs), nano titanium dioxide (nTiO2), graphene oxide (GO), that is used widely across the bone tissue regeneration research platform are included in this review with respect to their incorporation into a natural and/or synthetic polymer matrix. The influence of nanofillers on cell viability, both in vitro and in vivo, along with cytocompatibility and new tissue generation has been encompassed in this review. Moreover, nanocomposite material characterization using some commonly used analytical techniques, such as electron microscopy, spectroscopy, diffraction patterns, has been highlighted in this review. Biomaterial physical properties, such as pore size, porosity, particle size, and mechanical strength which strongly influences cell attachment, proliferation, and subsequent tissue growth has been covered in this review. This review has been sculptured around a case by case basis of current research that is being undertaken in the field of bone regeneration engineering. The nanofillers induced into the polymeric matrix render important properties, such as large surface area, improved mechanical strength as well as stability, improved cell adhesion, proliferation, and cell differentiation. The selection of nanocomposites is thus crucial in the analysis of viable treatment strategies for bone tissue regeneration for specific bone defects such as craniofacial defects. The effects of growth factor incorporation on the nanocomposite for controlling new bone generation are also important during the biomaterial design phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
Third-Generation Biomedical Materials
Hench, L. L., & Polak, J. M. (2002) · Science · doi:10.1126/science.1067404 · Cited by 2,789
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Collagens—structure, function, and biosynthesis
Gelse, K. (2003) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.08.002 · Cited by 2,654
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Murphy, C. M., Haugh, M. G., & O'Brien, F. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.063 · Cited by 2,056
Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells
Florencio-Silva, R., Sasso, G. R. D. S., Sasso-Cerri, E., Simões, M. J., & Cerri, P. S. (2015) · BioMed Research International · doi:10.1155/2015/421746 · Cited by 2,044
Bone regeneration: current concepts and future directions
Dimitriou, R., Jones, E., McGonagle, D., & Giannoudis, P. V. (2011) · BMC Medicine · doi:10.1186/1741-7015-9-66 · Cited by 2,003
Yang, F., Murugan, R., Wang, S., & Ramakrishna, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.051 · Cited by 1,804
Bone structure and formation: A new perspective
Olszta, M. J., Cheng, X., Jee, S. S., Kumar, R., Kim, Y.-Y., Kaufman, M. J., Douglas, E. P., & Gower, L. B. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.05.001 · Cited by 1,563
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Phase separation processes in polymer solutions in relation to membrane formation
van de Witte, P., Dijkstra, P. J., van den Berg, J. W. A., & Feijen, J. (1996) · Journal of Membrane Science · doi:10.1016/0376-7388(96)00088-9 · Cited by 1,393
Biodegradable synthetic polymers: Preparation, functionalization and biomedical application
Tian, H., Tang, Z., Zhuang, X., Chen, X., & Jing, X. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.004 · Cited by 1,293
Iliac Crest Bone Graft Harvest Donor Site Morbidity: A Statistical Evaluation
Banwart, J. C., Asher, M. A., & Hassanein, R. S. (1995) · Spine · doi:10.1097/00007632-199505000-00012 · Cited by 1,274
Van Der Rest, M., & Garrone, R. (1991) · The FASEB Journal · doi:10.1096/fasebj.5.13.1916105 · Cited by 1,271
Biomaterials for bone tissue engineering
Stevens, M. M. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70086-5 · Cited by 1,202
BONE-GRAFTING AND BONE-GRAFT SUBSTITUTES
FINKEMEIER, C. G. (2002) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200203000-00020 · Cited by 1,099
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Natural‐Based Nanocomposites for Bone Tissue Engineering and Regenerative Medicine: A Review
Pina, S., Oliveira, J. M., & Reis, R. L. (2015) · Advanced Materials · doi:10.1002/adma.201403354 · Cited by 948
Intrinsic extracellular matrix properties regulate stem cell differentiation
Reilly, G. C., & Engler, A. J. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.09.009 · Cited by 780
Yi, H., Wu, L.-Q., Bentley, W. E., Ghodssi, R., Rubloff, G. W., Culver, J. N., & Payne, G. F. (2005) · Biomacromolecules · doi:10.1021/bm050410l · Cited by 759
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Sirtuin 1 and Sirtuin 3: Physiological Modulators of Metabolism
Nogueiras, R., Habegger, K. M., Chaudhary, N., Finan, B., Banks, A. S., Dietrich, M. O., Horvath, T. L., Sinclair, D. A., Pfluger, P. T., & Tschöp, M. H. (2012) · Physiological Reviews · doi:10.1152/physrev.00022.2011 · Cited by 711
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Synthetic biodegradable functional polymers for tissue engineering: a brief review
Guo, B., & Ma, P. X. (2014) · Science China Chemistry · doi:10.1007/s11426-014-5086-y · Cited by 592
Isolation of collagen from fish waste material — skin, bone and fins
Nagai, T. (2000) · Food Chemistry · doi:10.1016/s0308-8146(99)00188-0 · Cited by 588
Sell, S. A., Wolfe, P. S., Garg, K., McCool, J. M., Rodriguez, I. A., & Bowlin, G. L. (2010) · Polymers · doi:10.3390/polym2040522 · Cited by 578
Bonfield, W., Grynpas, M. D., Tully, A. E., Bowman, J., & Abram, J. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90050-8 · Cited by 546
Zdrahala, R. J., & Zdrahala, I. J. (1999) · Journal of Biomaterials Applications · doi:10.1177/088532829901400104 · Cited by 540
Silk protein-based hydrogels: Promising advanced materials for biomedical applications
Kapoor, S., & Kundu, S. C. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.034 · Cited by 500
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Balani, K., Anderson, R., Laha, T., Andara, M., Tercero, J., Crumpler, E., & Agarwal, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.013 · Cited by 479
Hou, Q., Grijpma, D. W., & Feijen, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00562-8 · Cited by 457
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Collagen scaffolds derived from a marine source and their biocompatibility
Song, E., Yeon Kim, S., Chun, T., Byun, H.-J., & Lee, Y. M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.015 · Cited by 410
Therapies from Fucoidan; Multifunctional Marine Polymers
Fitton, J. H. (2011) · Marine Drugs · doi:10.3390/md9101731 · Cited by 392
Chitosan based biocomposite scaffolds for bone tissue engineering
Saravanan, S., Leena, R. S., & Selvamurugan, N. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.01.112 · Cited by 384
Xin, X., Hussain, M., & Mao, J. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.042 · Cited by 377
Bacterial alginates: from biosynthesis to applications
Remminghorst, U., & Rehm, B. H. A. (2006) · Biotechnology Letters · doi:10.1007/s10529-006-9156-x · Cited by 373
Kim, H., Lee, H., & Knowles, J. C. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30866 · Cited by 366
Yan, L.-P., Oliveira, J. M., Oliveira, A. L., Caridade, S. G., Mano, J. F., & Reis, R. L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.037 · Cited by 294
Chitosan-alginate biocomposite containing fucoidan for bone tissue engineering
Venkatesan, J., Bhatnagar, I., & Kim, S.-K. (2014) · Marine Drugs · doi:10.3390/md12010300 · Cited by 287
Peptide self-assembly for crafting functional biological materials
Matson, J. B., Zha, R. H., & Stupp, S. I. (2011) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2011.08.001 · Cited by 285
Bone Tissue Engineering and Regeneration: From Discovery to the Clinic—An Overview
O'Keefe, R. J., & Mao, J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0475 · Cited by 285
Thermal and mechanical characteristics of poly(l-lactic acid) nanocomposite scaffold
Lee, J. H., Park, T. G., Park, H. S., Lee, D. S., Lee, Y. K., Yoon, S. C., & Nam, J.-D. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00080-2 · Cited by 272
Bone-Graft Harvesting From Iliac and Fibular Donor Sites: Techniques and Complications
Ebraheim, N. A., Elgafy, H., & Xu, R. (2001) · Journal of the American Academy of Orthopaedic Surgeons · doi:10.5435/00124635-200105000-00007 · Cited by 255
Engineering porous scaffolds using gas-based techniques
Dehghani, F., & Annabi, N. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.04.005 · Cited by 251
Hasan, A., Waibhaw, G., Saxena, V., & Pandey, L. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.089 · Cited by 251
There is no such thing as a biocompatible material
Williams, D. F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.08.035 · Cited by 248
Tripathi, G., & Basu, B. (2012) · Ceramics International · doi:10.1016/j.ceramint.2011.07.012 · Cited by 238
Correia, C., Bhumiratana, S., Yan, L.-P., Oliveira, A. L., Gimble, J. M., Rockwood, D., Kaplan, D. L., Sousa, R. A., Reis, R. L., & Vunjak-Novakovic, G. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.019 · Cited by 236
Shi, Q., Zhou, C., Yue, Y., Guo, W., Wu, Y., & Wu, Q. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.042 · Cited by 229
Silk protein fibroin from Antheraea mylitta for cardiac tissue engineering
Patra, C., Talukdar, S., Novoyatleva, T., Velagala, S. R., Mühlfeld, C., Kundu, B., Kundu, S. C., & Engel, F. B. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.036 · Cited by 229
Baroli, B. (2009) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21528 · Cited by 226
Kundu, S. C., Kundu, B., Talukdar, S., Bano, S., Nayak, S., Kundu, J., Mandal, B. B., Bhardwaj, N., Botlagunta, M., Dash, B. C., et al. (2012) · Biopolymers · doi:10.1002/bip.22024 · Cited by 219
Isolation and characterization of collagen from brown backed toadfish (Lagocephalus gloveri) skin
Senaratne, L. S., Park, P.-J., & Kim, S.-K. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.024 · Cited by 217
Purohit, S. D., Bhaskar, R., Singh, H., Yadav, I., Gupta, M. K., & Mishra, N. C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.04.113 · Cited by 217
Baker, S. C., Rohman, G., Southgate, J., & Cameron, N. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.11.033 · Cited by 214
Turco, G., Marsich, E., Bellomo, F., Semeraro, S., Donati, I., Brun, F., Grandolfo, M., Accardo, A., & Paoletti, S. (2009) · Biomacromolecules · doi:10.1021/bm900154b · Cited by 210
Kavya, K. C., Jayakumar, R., Nair, S., & Chennazhi, K. P. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.04.023 · Cited by 206
Nagai, T., Yamashita, E., Taniguchi, K., Kanamori, N., & Suzuki, N. (2001) · Food Chemistry · doi:10.1016/s0308-8146(00)00249-1 · Cited by 202
Silk fibroin/chondroitin sulfate/hyaluronic acid ternary scaffolds for dermal tissue reconstruction
Yan, S., Zhang, Q., Wang, J., Liu, Y., Lu, S., Li, M., & Kaplan, D. L. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.016 · Cited by 194
Polycaprolactone nanofibers for the controlled release of tetracycline hydrochloride
Karuppuswamy, P., Venugopal, J. R., Navaneethan, B., Laiva, A. L., & Ramakrishna, S. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.11.044 · Cited by 188
Physical and monetary costs associated with autogenous bone graft harvesting.
John, T. A. S., Vaccaro, A. R., Sah, A. P., Schaefer, M., Berta, S. C., Albert, T., & Hilibrand, A. (2003) · PubMed · Cited by 185
Mehrasa, M., Asadollahi, M. A., Ghaedi, K., Salehi, H., & Arpanaei, A. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.05.050 · Cited by 179
Rao, S. H., Harini, B., Shadamarshan, R. P. K., Balagangadharan, K., & Selvamurugan, N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.029 · Cited by 178
Nazeer, M. A., Yilgör, E., & Yilgör, I. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.054 · Cited by 174
Ao, C., Niu, Y., Zhang, X., He, X., Zhang, W., & Lu, C. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.12.091 · Cited by 171
Genotoxic evaluation of titanium dioxide nanoparticles in vivo and in vitro
Chen, Z., Wang, Y., Ba, T., Li, Y., Pu, J., Chen, T., Song, Y., Gu, Y., Qin, Q., Yang, J., et al. (2014) · Toxicology Letters · doi:10.1016/j.toxlet.2014.02.020 · Cited by 165
Cross-linked cellulose nanocrystal aerogels as viable bone tissue scaffolds
Osorio, D. A., Lee, B. E. J., Kwiecien, J. M., Wang, X., Shahid, I., Hurley, A. L., Cranston, E. D., & Grandfield, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.049 · Cited by 162
Türk, S., Altınsoy, İ., Efe, G. C., Ipek, M., Özacar, M., & Bindal, C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.07.020 · Cited by 149
Cacciotti, I., Fortunati, E., Puglia, D., Kenny, J. M., & Nanni, F. M. C. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.052 · Cited by 144
Eslami, H., Solati‐Hashjin, M., & Tahriri, M. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.10.033 · Cited by 143
Lowe, B., Venkatesan, J., Anil, S., Shim, M. S., & Kim, S. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.02.054 · Cited by 143
Chen, Y. G., Kawazoe, N., & Chen, G. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.004 · Cited by 142
Campbell, J. J., Husmann, A., Hume, R. D., Watson, C. J., & Cameron, R. E. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.048 · Cited by 139
Regenerative Medicine and Tissue Engineering
Luyten, F. P. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4377-1738-9.00007-4 · Cited by 135
Chae, T., Yang, H., Leung, V. C. M., Ko, F., & Troczynski, T. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4957-7 · Cited by 132
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships
Scaffaro, R., Lopresti, F., Maio, A., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.11.005 · Cited by 132
Atak, B. H., Buyuk, B., Huysal, M., Işık, S., Şenel, M., Metzger, W., & Çetin, G. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.100 · Cited by 124
Shrestha, B. K., Shrestha, S., Tiwari, A. P., Kim, J.-I., Ko, S. W., Kim, H.-J., Park, C. H., & Kim, C. S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.049 · Cited by 122
Tamjid, E., Bagheri, R., Vossoughi, M., & Simchi, A. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.06.013 · Cited by 117
Lv, Q., Nair, L. S., & Laurencin, C. T. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32302 · Cited by 115
Fabbri, P., Bondioli, F., Messori, M., et al. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3839-5 · Cited by 114
Shao, W., He, J., Sang, F., Wang, Q., Chen, L., Cui, S., & Ding, B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.01.078 · Cited by 113
Shahbazarab, Z., Teimouri, A., Chermahini, A. N., & Azadi, M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.11.017 · Cited by 107
Beneficial effects of fucoidan on osteoblastic MG-63 cell differentiation
Cho, Y.-S., Jung, W., Kim, J., Choi, I., & Kim, S. (2009) · Food Chemistry · doi:10.1016/j.foodchem.2009.03.051 · Cited by 106
Montúfar, E. B., Traykova, T., Gil, C., Harr, I., Almirall, A., Aguirre, A., Engel, E., Planell, J. A., & Ginebra, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.018 · Cited by 105
BMP-2 immobilized PLGA/hydroxyapatite fibrous scaffold via polydopamine stimulates osteoblast growth
Zhao, X., Han, Y. L., Li, J., Cai, B., Gao, H., Feng, W., Li, S., Liu, J., & Li, D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.186 · Cited by 104
Scaffaro, R., Lopresti, F., Botta, L., Rigogliuso, S., & Ghersi, G. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.08.033 · Cited by 103
Biodegradable polymer matrix nanocomposites for bone tissue engineering
Hasnain, M. S., Ahmad, S. A., Chaudhary, N., Hoda, M. N., & Nayak, A. K. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813740-6.00001-6 · Cited by 101
Kumar, A., Rao, K. M., & Han, S. S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.030 · Cited by 100
Guarino, V., Causa, F., Netti, P. A., Ciapetti, G., Pagani, S., Martini, D., Baldini, N., & Ambrosio, L. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31055 · Cited by 96
Changotade, S., Korb, G., Bassil, J., Barroukh, B., Willig, C., Colliec‐Jouault, S., Durand, P., Godeau, G., & Senni, K. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31819 · Cited by 95
Sharma, S., Bano, S., Ghosh, A. S., Mandal, M., Kim, H., Dey, T., & Kundu, S. C. (2016) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2015.12.385 · Cited by 93
Alharbi, H. F., Luqman, M., Khalil, K. A., Elnakady, Y. A., Abd-Elkader, O. H., Rady, A. M., Alharthi, N. H., & Karim, M. R. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.11.052 · Cited by 92
Chen, L., Hu, J., Ran, J., Shen, X., & Tong, H. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.01.003 · Cited by 91
Lou, T., Wang, X. J., Song, G., Gu, Z., & Yang, Z. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.06.004 · Cited by 91
Huang, T., Fan, C., Zhu, M. C., Zhu, Y., Zhang, W., & Li, L. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.166 · Cited by 90
Oliveira, J. M., Silva, S. S., Malafaya, P. B., Rodrigues, M. T., Kotobuki, N., Hirose, M., Gomes, M. E., Mano, J. F., Ohgushi, H., & Reis, R. L. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32213 · Cited by 89
Mohammadi, M., Alibolandi, M., Abnous, K., Salmasi, Z., Jaafari, M. R., & Ramezani, M. (2018) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2018.06.001 · Cited by 89
Moreira, C. D. F., Carvalho, S. M., de Sousa, R. G., Mansur, H. S., & Pereira, M. M. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.07.039 · Cited by 89
Ehrenfried, L. M., Patel, M. H., & Cameron, R. E. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0061-6 · Cited by 87
Park, S.-J., Lee, K. W., Lim, D., & Lee, S. (2011) · Stem Cells and Development · doi:10.1089/scd.2011.0521 · Cited by 81
Saska, S., Teixeira, L. N., Raucci, L. M. S. D. C., et al. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.05.086 · Cited by 79
Gaihre, B., & Jayasuriya, A. C. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.060 · Cited by 76
Self-citationApproaches for building bioactive elements into synthetic scaffolds for bone tissue engineering
Kesireddy, V., & Kasper, F. K. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00783j · Cited by 76
Nanosized CaP-silk fibroin-PCL-PEG-PCL/PCL based bilayer membranes for guided bone regeneration
Türkkan, S., Pazarçeviren, A. E., Keskin, D., Machin, N. E., Duygulu, Ö., & Tezcaner, A. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.06.016 · Cited by 75
Hasan, M. M., Khan, M. N., Haque, P., & Rahman, M. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.06.020 · Cited by 75
Park, J., Kim, J.-M., Lee, S. J., et al. (2007) · Macromolecular Research · doi:10.1007/bf03218809 · Cited by 74
The Potential Impact of Bone Tissue Engineering in the Clinic
Mishra, R., Bishop, T. J., Valerio, I. L., Fisher, J. P., & Dean, D. (2016) · Regenerative Medicine · doi:10.2217/rme-2016-0042 · Cited by 72
Salerno, A., Fernández‐Gutiérrez, M., del Barrio, J. S. R., & Domingo, C. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.10.029 · Cited by 70
Rogina, A., Pribolšan, L., Hanžek, A., Gόmez-Estrada, L., Ferrer, G. G., Marijanović, I., Ivanković, M., & Ivanković, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.030 · Cited by 70
Eslami, H., Lisar, H. A., Kashi, T. S. J., Tahriri, M., Ansari, M., Rafiei, T., Bastami, F., Shahin‐Shamsabadi, A., Abbas, F. M., & Tayebi, L. (2018) · Biologicals · doi:10.1016/j.biologicals.2018.02.004 · Cited by 70
Fragal, E. H., Cellet, T. S. P., Fragal, V. H., et al. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.063 · Cited by 67
Beladi, F., Saber-Samandari, S., & Saber‐Samandari, S. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.040 · Cited by 67
Behera, S., Naskar, D., Sapru, S., Bhattacharjee, P., Dey, T., Ghosh, A. K., Mandal, M., & Kundu, S. C. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2017.02.016 · Cited by 67
Shams, M., Karimi, M., Ghollasi, M., Nezafati, N., Shahrousvand, M., Kamali, M., & Salimi, A. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.165 · Cited by 65
Shakir, M., Zia, I., Rehman, A., & Ullah, R. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.035 · Cited by 63
Synthesis and characterization of a chitosan based nanocomposite injectable hydrogel
Wang, Q., & Chen, D. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.10.040 · Cited by 60
Zhu, Q., Li, X., Fan, Z., Xu, Y., Niu, H. M., Li, C., Dang, Y., Huang, Z., Wang, Y., & Guan, J. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.12.008 · Cited by 60
Sahu, N., Baligar, P., Midha, S., Kundu, B., Bhattacharjee, M., Mukherjee, S., Mukherjee, S., Kennel-Maushart, F., Das, S., Loparić, M., et al. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500283 · Cited by 58
Purification and characterization of fibroin from the tropical Saturniid silkworm, Antheraea mylitta
Datta, A., Ghosh, A. K., & Kundu, S. C. (2001) · Insect Biochemistry and Molecular Biology · doi:10.1016/s0965-1748(01)00049-2 · Cited by 58
Poly(ε-caprolactone) as a potential material for a temporary joint spacer
Elfick, A. P. D. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00163-1 · Cited by 58
Chitosan-based nanocomposites for the repair of bone defects
Keller, L., Regiel-Futyra, A., Gimeno, M., Eap, S., Mendoza, G., Andreu, V., Wagner, Q., Kyzioł, A., Sebastián, V., Stochel, G., et al. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2017.06.007 · Cited by 57
Nojehdehian, H., Moztarzadeh, F., Baharvand, H., Nazarian, H., & Tahriri, M. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.04.029 · Cited by 56
Naskar, D., Nayak, S., Dey, T., & Kundu, S. C. (2014) · Scientific Reports · doi:10.1038/srep04745 · Cited by 56
Marine organisms as a source of natural matrix for bone tissue engineering
Lalzawmliana, V., Anand, A., Mukherjee, P., Chaudhuri, S., Kundu, B., Nandi, S. K., & Thakur, N. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.10.108 · Cited by 56
Moeini, S. A., Mohammadi, M. R., & Simchi, A. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.04.004 · Cited by 54
Marrella, A., Tedeschi, G., Giannoni, P., Lagazzo, A., Sbrana, F., Barberis, F., Quarto, R., Puglisi, F., & Scaglione, S. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.08.052 · Cited by 53
Reinforced electrospun PLLA fiber membrane via chemical crosslinking
Qiao, T., Song, P., Guo, H., Song, X., Zhang, B., & Chen, X. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.11.012 · Cited by 50
Shahrousvand, M., Sadeghi, G. M. M., & Salimi, A. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1231436 · Cited by 50
Highly dispersed nanoscale hydroxyapatite on cellulose nanofibers for bone regeneration
Yamaguchi, K., Prabakaran, M., Ma, K., Gang, X., Chung, I. M., Um, I. C., Gopiraman, M., & Kim, I. S. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.01.010 · Cited by 47
Star-shaped PCL/PLLA blended fiber membrane via electrospinning
Li, H., Qiao, T., Song, P., Guo, H., Song, X., Zhang, B., & Chen, X. (2015) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2015.1015865 · Cited by 41
Wang, Y., Shi, X., Ren, L., Yao, Y., Zhang, F., & Wang, D. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31561 · Cited by 41
Quade, M., Schumacher, M., Bernhardt, A., Lode, A., Kampschulte, M., Voß, A., Simon, P., Uckermann, O., Kirsch, M., & Gelinsky, M. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.038 · Cited by 40
Ran, J., Hu, J., Sun, G., Chen, S., Jiang, P., Shen, X., & Tong, H. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.062 · Cited by 39
Nojehdehian, H., Moztarzadeh, F., Baharvand, H., Mehrjerdi, N. Z., Nazarian, H., & Tahriri, M. (2010) · The International Journal of Artificial Organs · doi:10.5301/ijao.2010.5981 · Cited by 38
Gupta, A., Main, B. J., Taylor, B., Gupta, M., Whitworth, C. A., Cady, C., Freeman, J. W., & El‐Amin, S. F. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35088 · Cited by 36
Mele, L. L., Vitiello, P. P., Tirino, V., Paino, F., ROSA, A. D., Liccardo, D., Papaccio, G., & Desiderio, V. (2016) · Frontiers in Physiology · doi:10.3389/fphys.2016.00062 · Cited by 35
Bhattacharjee, P., Naskar, D., Maiti, T. K., Bhattacharya, D., Das, P., Nandi, S. K., & Kundu, S. C. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.03.058 · Cited by 34
Fragal, E. H., Cellet, T. S. P., Fragal, V. H., Witt, M. A., Companhoni, M. V. P., Ueda‐Nakamura, T., Silva, R., & Rubira, A. F. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.004 · Cited by 33
Advances in Bone Tissue Engineering
Bao, C. L. M., Erin, Y. L., Mark, S. K., Liu, Y., Choolani, M. A., & Jerry, K. Y. (2013) · InTech eBooks · doi:10.5772/55916 · Cited by 31
Development and evaluation of cross-linked collagen-hydroxyapatite scaffolds for tissue engineering
Panda, N. N., Jonnalagadda, S., & Pramanik, K. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2013.822247 · Cited by 30
Bioinspired Collagen-Apatite Nanocomposites for Bone Regeneration
Liu, S., Sun, Y., Fu, Y., Chang, D., Fu, C., Wang, G., Liu, Y., Tay, F. R., & Zhou, Y.-H. (2016) · Journal of Endodontics · doi:10.1016/j.joen.2016.04.027 · Cited by 30
BMP delivery systems for bone regeneration: Healthy vs osteoporotic population. Review
Segredo-Morales, E., García‐García, P., Évora, C., & Delgado, A. (2017) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2017.05.014 · Cited by 20
Cell response to single-walled carbon nanotubes in hybrid porous collagen sponges
Mao, H., Kawazoe, N., & Chen, G. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.12.013 · Cited by 19
Heo, S. J., Kim, S. E., Hyun, Y. T., Kim, D. H., Lee, H. M., Hwang, Y. M., Park, S. A., & Shin, J. W. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.369 · Cited by 16
Lu (1999) · doi:10.1002/(sici)1097-4636(199908)46:2
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
Natural and Synthetic Polymers for Biomedical and Environmental Applications
Satchanska, G., Davidova, S., & Petrov, P. D. (2024) · Polymers · doi:10.3390/polym16081159 · Cited by 585
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction
Shi, H., Zhou, Z., Li, W., Fan, Y., Li, Z., & Wei, J. (2021) · Crystals · doi:10.3390/cryst11020149 · Cited by 310
Metadata
- Authors
- Bharadwaz, A., & Jayasuriya, A. C.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 110
- Pages
- 110698
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W3004294173
- Cited by
- 738
- References
- 152
- FWCI
- 28.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.