The DOI matches its Crossref record; 199 of the 199 references it cites were found in a registry or an index.
Printable Smart Materials and Devices: Strategies and Applications
Abstract
Smart materials are a kind of functional materials which can sense and response to environmental conditions or stimuli from optical, electrical, magnetic mechanical, thermal, and chemical signals, etc. Patterning of smart materials is the key to achieving large-scale arrays of functional devices. Over the last decades, printing methods including inkjet printing, template-assisted printing, and 3D printing are extensively investigated and utilized in fabricating intelligent micro/nano devices, as printing strategies allow for constructing multidimensional and multimaterial architectures. Great strides in printable smart materials are opening new possibilities for functional devices to better serve human beings, such as wearable sensors, integrated optoelectronics, artificial neurons, and so on. However, there are still many challenges and drawbacks that need to be overcome in order to achieve the controllable modulation between smart materials and device performance. In this review, we give an overview on printable smart materials, printing strategies, and applications of printed functional devices. In addition, the advantages in actual practices of printing smart materials-based devices are discussed, and the current limitations and future opportunities are proposed. This review aims to summarize the recent progress and provide reference for novel smart materials and printing strategies as well as applications of intelligent devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emerging applications of stimuli-responsive polymer materials
Stuart, M. A. C., Huck, W. T. S., Genzer, J., Müller, M., Ober, C., Stamm, M., Sukhorukov, G. B., Szleifer, I., Tsukruk, V. V., Urban, M., et al. (2010) · Nature Materials · doi:10.1038/nmat2614 · Cited by 5,707
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Wearable Electronics and Smart Textiles: A Critical Review
Stoppa, M., & Chiolerio, A. (2014) · Sensors · doi:10.3390/s140711957 · Cited by 2,107
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Graphene and two-dimensional materials for silicon technology
Akinwande, D., Huyghebaert, C., Wang, C.-H., Serna, M. I., Goossens, S., Li, L.-J., Wong, H.-S. P., & Koppens, F. H. L. (2019) · Nature · doi:10.1038/s41586-019-1573-9 · Cited by 1,713
Neuroscience-Inspired Artificial Intelligence
Hassabis, D., Kumaran, D., Summerfield, C., & Botvinick, M. (2017) · Neuron · doi:10.1016/j.neuron.2017.06.011 · Cited by 1,557
Humidity Sensors: A Review of Materials and Mechanisms
Chen, Z., & Lu, C. (2005) · Sensor Letters · doi:10.1166/sl.2005.045 · Cited by 1,501
Bariya, M., Nyein, H. Y. Y., & Javey, A. (2018) · Nature Electronics · doi:10.1038/s41928-018-0043-y · Cited by 1,486
Smart objects as building blocks for the Internet of things
Kortuem, G., Kawsar, F., Sundramoorthy, V., & Fitton, D. (2010) · IEEE Internet Computing · doi:10.1109/mic.2009.143 · Cited by 1,478
Dry double-sided tape for adhesion of wet tissues and devices
Yuk, H., Varela, C. E., Nabzdyk, C. S., Mao, X., Padera, R. F., Roche, E. T., & Zhao, X. (2019) · Nature · doi:10.1038/s41586-019-1710-5 · Cited by 1,471
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Rahwan, I., Cebrian, M., Obradovich, N., Bongard, J., Bonnefon, J.-F., Breazeal, C., Crandall, J. W., Christakis, N. A., Couzin, I. D., Jackson, M. O., et al. (2019) · Nature · doi:10.1038/s41586-019-1138-y · Cited by 1,364
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Stimuli-responsive polymers and their applications
Wei, M., Gao, Y., Li, X., & Serpe, M. J. (2017) · Polymer Chemistry · doi:10.1039/c6py01585a · Cited by 1,298
A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat
Yang, Y., Song, Y., Bo, X., Min, J., Pak, O. S., Zhu, L., Wang, M., Tu, J., Kogan, A., Zhang, H., et al. (2020) · Nature Biotechnology · doi:10.1038/s41587-019-0321-x · Cited by 1,270
Self-citationWearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring
Wang, Y., Wang, L., Yang, T., Li, X., Zang, X., Zhu, M., Wang, K., Wu, D., & Zhu, H. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400379 · Cited by 1,085
Micro-cable structured textile for simultaneously harvesting solar and mechanical energy
Chen, J., Huang, Y., Zhang, N., Zou, H., Liu, R., Tao, C., Fan, X., & Wang, Z. L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.138 · Cited by 1,060
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Soft material for soft actuators
Miriyev, A., Stack, K., & Lipson, H. (2017) · Nature Communications · doi:10.1038/s41467-017-00685-3 · Cited by 861
Nature-Inspired Structural Materials for Flexible Electronic Devices
Liu, Y., He, K., Chen, G., Leow, W. R., & Chen, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00291 · Cited by 798
Graphene-based smart materials
Yu, X., Cheng, H., Zhang, M., Zhao, Y., Qu, L., & Shi, G. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.46 · Cited by 796
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Chemical sensing with 2D materials
Anichini, C., Czepa, W., Pakulski, D., Aliprandi, A., Ciesielski, A., & Samorì, P. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00417j · Cited by 756
Artificial optic-neural synapse for colored and color-mixed pattern recognition
Seo, S., Jo, S.-H., Kim, S., Shim, J., Oh, S., Kim, J.-H., Heo, K., Choi, J.-W., Choi, C., Oh, S., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07572-5 · Cited by 731
A Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
A Review on Metasurface: From Principle to Smart Metadevices
Hu, J., Bandyopadhyay, S., Liu, Y.-H., & Shao, L.-Y. (2021) · Frontiers in Physics · doi:10.3389/fphy.2020.586087 · Cited by 711
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Chemical sensors based on nanostructured materials
Huang, X.-J., & Choi, Y.-K. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.06.022 · Cited by 662
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Materials that couple sensing, actuation, computation, and communication
McEvoy, M. A., & Correll, N. (2015) · Science · doi:10.1126/science.1261689 · Cited by 650
A wireless body area sensor network based on stretchable passive tags
Niu, S., Matsuhisa, N., Beker, L., Li, J., Wang, S., Wang, J., Jiang, Y., Yan, X., Yun, Y., Burnett, W., et al. (2019) · Nature Electronics · doi:10.1038/s41928-019-0286-2 · Cited by 601
Organic core-sheath nanowire artificial synapses with femtojoule energy consumption
Xu, W., Min, S.-Y., Hwang, H., & Lee, T.-W. (2016) · Science Advances · doi:10.1126/sciadv.1501326 · Cited by 570
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Nguyen, P. Q., Courchesne, N. D., Duraj‐Thatte, A., Praveschotinunt, P., & Joshi, N. S. (2018) · Advanced Materials · doi:10.1002/adma.201704847 · Cited by 566
He, Q., Wang, Z., Wang, Y., Minori, A., Tolley, M. T., & Cai, S. (2019) · Science Advances · doi:10.1126/sciadv.aax5746 · Cited by 564
Koo, J. H., Kim, D. C., Shim, H. J., Kim, T., & Kim, D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801834 · Cited by 562
Emerging flexible and wearable physical sensing platforms for healthcare and biomedical applications
Kenry, Yeo, J. C., & Lim, C. T. (2016) · Microsystems & Nanoengineering · doi:10.1038/micronano.2016.43 · Cited by 550
Multifunctional Energy Storage and Conversion Devices
Huang, Y., Zhu, M., Huang, Y., Pei, Z., Li, H., Wang, Z., Xue, Q., & Zhi, C. (2016) · Advanced Materials · doi:10.1002/adma.201601928 · Cited by 544
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Self-citationStretchable organic optoelectronic sensorimotor synapse
Lee, Y., Oh, J. Y., Xu, W., Kim, O., Kim, T. R., Kang, J., Kim, Y., Son, D., Tok, J. B.-H., Park, M. J., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat7387 · Cited by 534
Biohybrid actuators for robotics: A review of devices actuated by living cells
Ricotti, L., Trimmer, B., Feinberg, A. W., Raman, R., Parker, K. K., Bashir, R., Sitti, M., Martel, S., Dario, P., & Menciassi, A. (2017) · Science Robotics · doi:10.1126/scirobotics.aaq0495 · Cited by 527
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Zhang, P., Wang, F., Yu, M., Zhuang, X., & Feng, X. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00561c · Cited by 514
“Smart” Materials Based on Cellulose: A Review of the Preparations, Properties, and Applications
Qiu, X., & Hu, S. (2013) · Materials · doi:10.3390/ma6030738 · Cited by 509
Design and application of magnetostrictive materials
Olabi, A. G., & Grunwald, A. (2008) · Materials & Design · doi:10.1016/j.matdes.2006.12.016 · Cited by 500
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
Smart metasurface with self-adaptively reprogrammable functions
Ma, Q., Bai, G. D., Jing, H. B., Yang, C., Li, L., & Cui, T. J. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0205-3 · Cited by 490
Intelligent Device-to-Device Communication in the Internet of Things
Bello, O., & Zeadally, S. (2016) · IEEE Systems Journal · doi:10.1109/jsyst.2014.2298837 · Cited by 485
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Untethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476
Carey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Carbon‐Nanotube Fibers for Wearable Devices and Smart Textiles
Di, J., Zhang, X., Yong, Z., Zhang, Y., Li, D., Li, R., & Li, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601186 · Cited by 408
Hierarchically arranged helical fibre actuators driven by solvents and vapours
Chen, P., Xu, Y., He, S., Sun, X., Pan, S., Deng, J., Chen, D., & Peng, H. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.198 · Cited by 380
Magnetic-Assisted, Self-Healable, Yarn-Based Supercapacitor
Huang, Y., Huang, Y., Zhu, M., Meng, W., Pei, Z., Liu, C., Hu, H., & Zhi, C. (2015) · ACS Nano · doi:10.1021/acsnano.5b01602 · Cited by 371
Bioinspired underwater locomotion of light-driven liquid crystal gels
Shahsavan, H., Aghakhani, A., Zeng, H., Guo, Y., Davidson, Z. S., Priimagi, A., & Sitti, M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1917952117 · Cited by 370
Transfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
The Era of Digital Health: A Review of Portable and Wearable Affinity Biosensors
Tu, J., Torrente‐Rodríguez, R. M., Wang, M., & Gao, W. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906713 · Cited by 357
Programmable CRISPR-responsive smart materials
English, M. A., Soenksen, L. R., Gayet, R. V., de Puig, H., Angenent-Mari, N. M., Mao, A. S., Nguyen, P. Q., & Collins, J. J. (2019) · Science · doi:10.1126/science.aaw5122 · Cited by 356
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
Lv, Z., Luo, Y., Tang, Y., Wei, J., Zhu, Z., Zhou, X., Li, W., Zeng, Y., Zhang, W., Zhang, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704531 · Cited by 343
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Multifunctional conductive hydrogels and their applications as smart wearable devices
Chen, Z., Chen, Y., Hedenqvist, M. S., Chen, C., Cai, C., Li, H., Liu, H., & Fu, J. (2021) · Journal of Materials Chemistry B · doi:10.1039/d0tb02929g · Cited by 323
Mendes‐Felipe, C., Oliveira, J., Etxebarria, I., Vilas‐Vilela, J. L., & Lanceros‐Mendez, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800618 · Cited by 316
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
Recent Progress of Self‐Powered Sensing Systems for Wearable Electronics
Lou, Z., Li, L., Wang, L., & Shen, G. (2017) · Small · doi:10.1002/smll.201701791 · Cited by 309
Printable Skin‐Driven Mechanoluminescence Devices via Nanodoped Matrix Modification
Qian, X., Cai, Z., Su, M., Li, F., Fang, W., Li, Y., Zhou, X., Li, Q., Feng, X., Li, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800291 · Cited by 306
Self-citationProgrammable Kiri‐Kirigami Metamaterials
Tang, Y., Lin, G., Yang, S., Yi, Y. K., Kamien, R. D., & Yin, J. (2017) · Advanced Materials · doi:10.1002/adma.201604262 · Cited by 298
Inkjet-printed stretchable and low voltage synaptic transistor array
Molina-Lopez, F., Gao, T. Z., Kraft, U., Zhu, C., Öhlund, T., Pfattner, R., Feig, V. R., Kim, Y., Wang, S., Yun, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10569-3 · Cited by 296
Large-scale organic nanowire lithography and electronics
Min, S.-Y., Kim, T.-S., Kim, B. J., Cho, H., Noh, Y.-Y., Yang, H., Cho, J. H., & Lee, T.-W. (2013) · Nature Communications · doi:10.1038/ncomms2785 · Cited by 282
Photoinduced Electron Transfer at Molecule−Metal Interfaces
Lindstrom, C. D., & Zhu, X.-Y. (2006) · Chemical Reviews · doi:10.1021/cr0501689 · Cited by 280
Qian, C., Li, L., Gao, M., Yang, H., Cai, Z., Chen, B., Xiang, Z., Zhang, Z., & Song, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103885 · Cited by 280
Self-citationAdditive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
Cui, Z., Han, Y., Huang, Q., Dong, J., & Zhu, Y. (2018) · Nanoscale · doi:10.1039/c7nr09570h · Cited by 277
Materials, Structures, and Functions for Flexible and Stretchable Biomimetic Sensors
Li, T., Li, Y., & Zhang, T. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00497 · Cited by 274
Three-dimensional printing of functionally graded liquid crystal elastomer
Wang, Z., Wang, Z., Zheng, Y., He, Q., Wang, Y., & Cai, S. (2020) · Science Advances · doi:10.1126/sciadv.abc0034 · Cited by 274
Photosensitive gold-nanoparticle-embedded dielectric nanowires
Hu, M.-S., Chen, H.-L., Shen, C.-H., Hong, L.-S., Huang, B.-R., Chen, K.-H., & Chen, L.-C. (2006) · Nature Materials · doi:10.1038/nmat1564 · Cited by 270
Hu, X., Meng, X., Zhang, L., Zhang, Y., Cai, Z., Huang, Z., Su, M., Wang, Y., Li, M., Li, F., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.011 · Cited by 267
Self-citationCombinatorial and High-Throughput Development of Sensing Materials: The First 10 Years
Potyrailo, R. A., & Mirsky, V. M. (2008) · Chemical Reviews · doi:10.1021/cr068127f · Cited by 258
Electrorheological fluids: smart soft matter and characteristics
Liu, Y. D., & Choi, H. J. (2012) · Soft Matter · doi:10.1039/c2sm26179k · Cited by 258
Li, Z., Liu, P., Ji, X., Gong, J., Hu, Y., Wu, W., Wang, X., Peng, H., Kwok, R. T. K., Lam, J. W. Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906493 · Cited by 250
Sim, K., Ershad, F., Zhang, Y., Yang, P., Shim, H., Rao, Z., Lu, Y., Thukral, A., Elgalad, A., Xi, Y., et al. (2020) · Nature Electronics · doi:10.1038/s41928-020-00493-6 · Cited by 250
Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets
Sun, J., Bao, B., He, M., Zhou, H., & Song, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07006 · Cited by 249
Self-citationSmart polymers and nanocomposites for 3D and 4D printing
Falahati, M., Ahmadvand, P., Safaee, S., Chang, Y.-C., Lyu, Z., Chen, R., Li, L., & Lin, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2020.06.001 · Cited by 245
Artificial Intelligence in Medical Sensors for Clinical Decisions
Haick, H., & Tang, N. (2021) · ACS Nano · doi:10.1021/acsnano.1c00085 · Cited by 231
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Camposeo, A., Persano, L., Farsari, M., & Pisignano, D. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800419 · Cited by 227
Yoshida, M., & Lahann, J. (2008) · ACS Nano · doi:10.1021/nn800332g · Cited by 214
High Detectivity All‐Printed Organic Photodiodes
Pierre, A., Deckman, I., Lechêne, P. B., & Arias, A. C. (2015) · Advanced Materials · doi:10.1002/adma.201502238 · Cited by 212
Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems
Ota, H., Emaminejad, S., Gao, Y., Zhao, A., Wu, E., Challa, S., Chen, K., Fahad, H. M., Jha, A. K., Kiriya, D., et al. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600013 · Cited by 212
Printable Fabrication of a Fully Integrated and Self‐Powered Sensor System on Plastic Substrates
Lin, Y., Chen, J., Tavakoli, M. M., Gao, Y., Zhu, Y., Zhang, D., Kam, M., He, Z., & Fan, Z. (2019) · Advanced Materials · doi:10.1002/adma.201804285 · Cited by 210
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
A fully inkjet-printed disposable glucose sensor on paper
Bihar, E., Wustoni, S., Pappa, A. M., Salama, K. N., Baran, D., & Inal, S. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0044-y · Cited by 207
Autonomic perspiration in 3D-printed hydrogel actuators
Mishra, A. K., Wallin, T. J., Pan, W., Xu, A., Wang, K., Giannelis, E. P., Mazzolai, B., & Shepherd, R. F. (2020) · Science Robotics · doi:10.1126/scirobotics.aaz3918 · Cited by 207
Recent Advances in Smart Wearable Sensing Systems
Lou, Z., Wang, L., & Shen, G. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800444 · Cited by 206
Hou, J., Zhang, H., Yang, Q., Li, M., Jiang, L., & Song, Y. (2015) · Small · doi:10.1002/smll.201403640 · Cited by 205
Self-citationYu, F., Zhu, L. Q., Xiao, H., Gao, W. T., & Guo, Y. B. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804025 · Cited by 203
3D Printing of Interdigitated Dielectric Elastomer Actuators
Chortos, A., Hajiesmaili, E., Morales, J., Clarke, D. R., & Lewis, J. A. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907375 · Cited by 198
The research status and challenges of shape memory polymer-based flexible electronics
Gao, H., Li, J., Zhang, F., Liu, Y., & Leng, J. (2019) · Materials Horizons · doi:10.1039/c8mh01070f · Cited by 197
Wang, W., Xiang, C., Zhu, Q., Zhong, W., Li, M., Yan, K., & Wang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08554 · Cited by 191
Qiu, Q., Zhu, M., Li, Z., Qiu, K., Liu, X., Yu, J., & Ding, B. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.02.010 · Cited by 191
Nature‐Inspired Electrochemical Energy‐Storage Materials and Devices
Wang, H., Yang, Y., & Guo, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601709 · Cited by 189
Multimaterial 3D laser microprinting using an integrated microfluidic system
Mayer, F., Richter, S., Westhauser, J., Blasco, E., Barner-Kowollik, C., & Wegener, M. (2019) · Science Advances · doi:10.1126/sciadv.aau9160 · Cited by 189
Smart materials in additive manufacturing: state of the art and trends
Gardan, J. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1518016 · Cited by 187
Li, F., Macdonald, N. P., Guijt, R. M., & Breadmore, M. C. (2019) · Lab on a Chip · doi:10.1039/c8lc00826d · Cited by 187
Bio‐Multifunctional Smart Wearable Sensors for Medical Devices
Wang, L., Lou, Z., Jiang, K., & Shen, G. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900040 · Cited by 187
Nanoparticle Based Curve Arrays for Multirecognition Flexible Electronics
Su, M., Li, F., Chen, S., Huang, Z., Qin, M., Li, W., Zhang, X., & Song, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504759 · Cited by 184
Self-citationOne Single Graphene Oxide Film for Responsive Actuation
Cheng, H., Zhao, F., Xue, J., Shi, G., Jiang, L., & Qu, L. (2016) · ACS Nano · doi:10.1021/acsnano.6b04769 · Cited by 183
Smart Biomaterials: Recent Advances and Future Directions
Kowalski, P. S., Bhattacharya, C., Afewerki, S., & Langer, R. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00889 · Cited by 181
Onses, M. S., Song, C., Williamson, L., Sutanto, E., Ferreira, P. M., Alleyne, A. G., Nealey, P. F., Ahn, H., & Rogers, J. A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.160 · Cited by 180
Responsive Smart Windows from Nanoparticle–Polymer Composites
Kim, H., & Yang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201902597 · Cited by 177
A Route Toward Smart System Integration: From Fiber Design to Device Construction
Weng, W., Yang, J., Zhang, Y., Li, Y., Yang, S., Zhu, L., & Zhu, M. (2020) · Advanced Materials · doi:10.1002/adma.201902301 · Cited by 175
Additive manufacturing of hydrogel-based materials for next-generation implantable medical devices
Chin, S. Y., Poh, Y. C., Kohler, A.-C., Compton, J. T., Hsu, L. L., Lau, K. M., Kim, S., Lee, B. W., Lee, F. Y., & Sia, S. K. (2017) · Science Robotics · doi:10.1126/scirobotics.aah6451 · Cited by 172
Kang, D., Young, J. L., Lim, H., Klein, W. E., Chen, H., Xi, Y., Gai, B., Deutsch, T. G., & Yoon, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.43 · Cited by 170
Printable Ultrathin Metal Oxide Semiconductor-Based Conformal Biosensors
Rim, Y. S., Bae, S., Chen, H., Yang, J. L., Kim, J., Andrews, A. M., Weiss, P. S., Yang, Y., & Tseng, H. (2015) · ACS Nano · doi:10.1021/acsnano.5b05325 · Cited by 163
Smart Materials by Nanoscale Magnetic Assembly
Li, Z., Yang, F., & Yin, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903467 · Cited by 159
Lithium-film ceramics for solid-state lithionic devices
Zhu, Y., Gonzalez‐Rosillo, J. C., Balaish, M., Hood, Z. D., Kim, K. J., & Rupp, J. L. M. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00261-0 · Cited by 157
3D Printed “Earable” Smart Devices for Real-Time Detection of Core Body Temperature
Ota, H., Chao, M., Gao, Y., Wu, E., Tai, L.-C., Chen, K., Matsuoka, Y., Iwai, K., Fahad, H. M., Gao, W., et al. (2017) · ACS Sensors · doi:10.1021/acssensors.7b00247 · Cited by 154
Printing Flexible and Hybrid Electronics for Human Skin and Eye‐Interfaced Health Monitoring Systems
Kim, K., Kim, B., & Lee, C. H. (2019) · Advanced Materials · doi:10.1002/adma.201902051 · Cited by 153
Integrated Devices for Non‐Invasive Diagnostics
Ates, H. C., Brunauer, A., von Stetten, F., Urban, G. A., Güder, F., Merkoçi, A., Früh, S. M., & Dincer, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010388 · Cited by 153
Wang, X. S., Guo, X., Ye, J., Zheng, N., Kohli, P., Choi, D., Zhang, Y., Xie, Z., Zhang, Q., Luan, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201805615 · Cited by 152
Bio-inspired sensing and actuating materials
Zhao, Q., Wang, Y., Cui, H., & Du, X. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01483g · Cited by 152
Direct‐Writing Multifunctional Perovskite Single Crystal Arrays by Inkjet Printing
Gu, Z., Wang, K., Li, H., Gao, M., Li, L., Kuang, M., Zhao, Y. S., Li, M., & Song, Y. (2016) · Small · doi:10.1002/smll.201603217 · Cited by 151
Self-citationLegner, C. M., Kalwa, U., Patel, V., Chesmore, A., & Pandey, S. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.07.020 · Cited by 151
3D Crumpled Ultrathin 1T MoS2 for Inkjet Printing of Mg-Ion Asymmetric Micro-supercapacitors
Shao, Y., Fu, J., Cao, Z. Z., Song, K., Sun, R., Wan, Y., Shamim, A., Cavallo, L., Han, Y., Kaner, R. B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c02585 · Cited by 150
Stanisz, M., Kłapiszewski, Ł., & Jesionowski, T. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125409 · Cited by 140
A general patterning approach by manipulating the evolution of two-dimensional liquid foams
Huang, Z., Su, M., Yang, Q., Li, Z., Chen, S., Li, Y., Zhou, X., Li, F., & Song, Y. (2017) · Nature Communications · doi:10.1038/ncomms14110 · Cited by 138
Self-citationCafarelli, A., Verbeni, A., Poliziani, A., Dario, P., Menciassi, A., & Ricotti, L. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.049 · Cited by 137
Lee, J. H., Kim, H., Hwang, J., Chung, J., Jang, T., Seo, D. G., Gao, Y., Lee, J., Park, H., Lee, S., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c03110 · Cited by 132
3D Self‐Assembled Microelectronic Devices: Concepts, Materials, Applications
Karnaushenko, D., Kang, T. H., Bandari, V. K., Zhu, F., & Schmidt, O. G. (2019) · Advanced Materials · doi:10.1002/adma.201902994 · Cited by 129
Additive manufacturing with stimuli-responsive materials
Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J., & Thrasher, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07716a · Cited by 128
Chen, X., Xiong, J., Parida, K., Guo, M., Wang, C., Wang, C., Li, X., Shao, J., & Lee, P. S. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103904 · Cited by 127
Advanced Colloidal Lithography Beyond Surface Patterning
Ai, B., Möhwald, H., Wang, D., & Zhang, G. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600271 · Cited by 125
Dual-3D Femtosecond Laser Nanofabrication Enables Dynamic Actuation
Zhang, Y., Tian, Y., Wang, H., Ma, Z., Han, D., Niu, L., Chen, Q., & Sun, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08200 · Cited by 124
Mechanically active materials in three-dimensional mesostructures
Ning, X., Yu, X., Wang, H., Sun, R., Corman, R. E., Li, H., Lee, C. M., Xue, Y., Chempakasseril, A., Yao, Y., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat8313 · Cited by 123
3D‐Printable Photochromic Molecular Materials for Reversible Information Storage
Wales, D. J., Cao, Q., Kastner, K., Karjalainen, E., Newton, G. N., & Sans, V. (2018) · Advanced Materials · doi:10.1002/adma.201800159 · Cited by 122
A vision for future bioinspired and biohybrid robots
Mazzolai, B., & Laschi, C. (2020) · Science Robotics · doi:10.1126/scirobotics.aba6893 · Cited by 122
Review—Towards Wearable Sensor Platforms for the Electrochemical Detection of Cortisol
Sekar, M. K., Sriramprabha, R., Sekhar, P. K., Bhansali, S., Ponpandian, N., Manickam, P., & Viswanathan, C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7e24 · Cited by 121
Zhao, Y., Gao, S., Zhang, X., Huo, W., Xu, H., Chen, C., Li, J., Xu, K., & Huang, X. L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001553 · Cited by 121
Tian, Z., Sun, Z., Shao, Y., Gao, L., Huang, R., Shao, Y., Kaner, R. B., & Sun, J. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03623d · Cited by 121
Chinese Brushes: Controllable Liquid Transfer in Ratchet Conical Hairs
Wang, Q., Su, B., Liu, H., et al. (2014) · Advanced Materials · doi:10.1002/adma.201400865 · Cited by 120
Devising Materials Manufacturing Toward Lab‐to‐Fab Translation of Flexible Electronics
Luo, Y., Wang, M., Wan, C., Cai, P., Loh, X. J., & Chen, X. (2020) · Advanced Materials · doi:10.1002/adma.202001903 · Cited by 120
Modular fabrication of intelligent material-tissue interfaces for bioinspired and biomimetic devices
Clegg, J. R., Wagner, A. M., Shin, S. R., Hassan, S., Khademhosseini, A., & Peppas, N. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100589 · Cited by 116
A portable three-degrees-of-freedom force feedback origami robot for human–robot interactions
Mintchev, S., Salerno, M., Cherpillod, A., Scaduto, S., & Paik, J. K. (2019) · Nature Machine Intelligence · doi:10.1038/s42256-019-0125-1 · Cited by 115
Park, H., Park, W., & Lee, C. H. (2021) · NPG Asia Materials · doi:10.1038/s41427-020-00280-x · Cited by 114
Highly Flexible, Multipixelated Thermosensitive Smart Windows Made of Tough Hydrogels
La, T., Li, X., Kumar, A., Fu, Y., Yang, S. M., & Chung, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08907 · Cited by 112
Solution-processed electronics for artificial synapses
Lu, K., Li, X., Sun, Q., Pang, X., Chen, J., Minari, T., Liu, X., & Song, Y. (2020) · Materials Horizons · doi:10.1039/d0mh01520b · Cited by 112
Self-citationLaser printing hierarchical structures with the aid of controlled capillary-driven self-assembly
Hu, Y., Lao, Z., Cumming, B. P., Wu, D. Q., Li, J., Liang, H., Chu, J., Huang, W., & Gu, M. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1503861112 · Cited by 111
Design and Implementation of a Smart Home System Using Multisensor Data Fusion Technology
Hsu, Y., Chou, P., Chang, H.-C., Lin, S., Yang, S.-C., Su, H.-Y., Chang, C.-C., Cheng, Y., & Kuo, Y.-C. (2017) · Sensors · doi:10.3390/s17071631 · Cited by 110
Structural Innovations in Printed, Flexible, and Stretchable Electronics
Yin, L., Lv, J., & Wang, J. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000694 · Cited by 110
Microfluidic Printing of Slippery Textiles for Medical Drainage around Wounds
Zhang, H., Chen, G., Yu, Y., Guo, J., Tan, Q., & Zhao, Y. (2020) · Advanced Science · doi:10.1002/advs.202000789 · Cited by 107
Droplet Precise Self‐Splitting on Patterned Adhesive Surfaces for Simultaneous Multidetection
Li, H., Fang, W. P., Zhao, Z., Li, A., Li, Z., Li, M., Li, Q., Feng, X., & Song, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202003839 · Cited by 105
Self-citationTransfer Printing of Electronic Functions on Arbitrary Complex Surfaces
Park, J., Lee, Y., Lee, H., & Ko, H. (2020) · ACS Nano · doi:10.1021/acsnano.9b09846 · Cited by 88
Recent progress on printable power supply devices and systems with nanomaterials
Lin, Y., Gao, Y., Fang, F., & Fan, Z. (2018) · Nano Research · doi:10.1007/s12274-018-2068-y · Cited by 86
Smart Nanostructured Materials based on Self‐Assembly of Block Copolymers
Kim, J. H., Jin, H. M., Yang, G. G., Han, K. H., Yun, T., Shin, J. Y., Jeong, S., & Kim, S. O. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902049 · Cited by 86
Smart biomimetic micro/nanostructures based on liquid crystal elastomers and networks
Shahsavan, H., Yu, L., Jákli, A. I., & Zhao, B. (2017) · Soft Matter · doi:10.1039/c7sm01466j · Cited by 83
Kwon, Y., Kim, H., Mahmood, M., Kim, Y., Demolder, C., & Yeo, W. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c14193 · Cited by 83
Inkjet-Printed Human Body Temperature Sensor for Wearable Electronics
Ali, S., Khan, S., & Bermak, A. (2019) · IEEE Access · doi:10.1109/access.2019.2949335 · Cited by 77
Inflight fiber printing toward array and 3D optoelectronic and sensing architectures
Wang, W., Ouaras, K., Rutz, A. L., Li, X., Gerigk, M., Naegele, T. E., Malliaras, G. G., & Huang, Y. Y. S. (2020) · Science Advances · doi:10.1126/sciadv.aba0931 · Cited by 77
Hybrid low-voltage physical unclonable function based on inkjet-printed metal-oxide transistors
Scholz, A. S., Zimmermann, L., Gengenbach, U. K., Koker, L., Chen, Z., Hahn, H., Sikora, A., Tahoori, M. B., & Aghassi‐Hagmann, J. (2020) · Nature Communications · doi:10.1038/s41467-020-19324-5 · Cited by 75
High-resolution combinatorial patterning of functional nanoparticles
Xing, X., Man, Z., Bian, J., Yin, Y., Zhang, W., & Lu, Z. (2020) · Nature Communications · doi:10.1038/s41467-020-19771-0 · Cited by 74
Responsive principles and applications of smart materials in biosensing
Guo, Z., Liu, H., Dai, W., & Lei, Y. (2020) · Smart Materials in Medicine · doi:10.1016/j.smaim.2020.07.001 · Cited by 68
Nanoimprint Lithography: A Processing Technique for Nanofabrication Advancement
Zhou, W., Min, G., Zhang, J., Liu, Y., Wang, J., Zhang, Y., & Sun, F. (2011) · Nano-Micro Letters · doi:10.1007/bf03353663 · Cited by 67
360° omnidirectional, printable and transparent photodetectors for flexible optoelectronics
Lien, D., Wang, H.-P., Chen, S.-B., Chi, Y., Wu, C.-L., Lin, G., Liao, Y., & He, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0032-2 · Cited by 65
Electrostrictive microelectromechanical fibres and textiles
Khudiyev, T., Clayton, J. D., Levy, E. C., Chocat, N., Gumennik, A., Stolyarov, A. M., Joannopoulos, J. D., & Fink, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-01558-5 · Cited by 63
Rayleigh Instability-Assisted Satellite Droplets Elimination in Inkjet Printing
Yang, Q., Li, H., Li, M., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11356 · Cited by 60
Inkjet Printing of Complex Soft Machines with Densely Integrated Electrostatic Actuators
Schlatter, S., Grasso, G., Rosset, S., & Shea, H. R. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000136 · Cited by 59
Controlled Microstructural Architectures Based on Smart Fabrication Strategies
Ding, H., Zhang, Q., Gu, H., Liu, X., Sun, L., Gu, M., & Gu, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901760 · Cited by 54
Fabricating High-Resolution Metal Pattern with Inkjet Printed Water-Soluble Sacrificial Layer
Sun, J., Li, Y., Liu, G., Chen, S., Zhang, Y., Chen, C., Chu, F., & Song, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01138 · Cited by 48
Self-citationFedorov, F. S., Simonenko, N. P., Trouillet, V., Volkov, I. A., Plugin, I. A., Rupasov, D. P., Mokrushin, A. S., Nagornov, I. A., Simonenko, T. L., Vlasov, I. S., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c14055 · Cited by 47
Biomimetic approaches toward smart bio-hybrid systems
Luo, Z., Weiss, D. E., Liu, Q., & Tian, B. (2018) · Nano Research · doi:10.1007/s12274-018-2004-1 · Cited by 44
Lee, E. K., Baruah, R. K., Leem, J. W., Park, W., Kim, B. H., Urbas, A. M., Ku, Z., Kim, Y. L., Alam, M. A., & Lee, C. H. (2020) · Advanced Materials · doi:10.1002/adma.202004456 · Cited by 42
Li, H., Wang, Z., Cao, Y. K., Chen, Y., & Feng, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19837 · Cited by 41
Swarm Intelligence‐Inspired Spontaneous Fabrication of Optimal Interconnect at the Micro/Nanoscale
Su, M., Huang, Z., Huang, Y. P., Chen, S., Qian, X., Li, W., Li, Y., Pei, W., Chen, H., Li, F., et al. (2016) · Advanced Materials · doi:10.1002/adma.201605223 · Cited by 39
Self-citationSmart Sensing Systems Using Wearable Optoelectronics
Ku, M., Hwang, J. C., Oh, B., & Park, J. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900144 · Cited by 39
Piezotronic materials and large-scale piezotronics array devices
Hu, W., Kalantar‐Zadeh, K., Gupta, K., & Liu, C. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.292 · Cited by 38
Novel fabrication of soft microactuators with morphological computing using soft lithography
Tyagi, M., Pan, J., & Jager, E. W. H. (2019) · Microsystems & Nanoengineering · doi:10.1038/s41378-019-0092-z · Cited by 38
Direct 2D-to-3D transformation of pen drawings
Song, S. W., Lee, S., Choe, J. K., Kim, N., Kang, J., Lee, A. C., Choi, Y., Choi, A., Jeong, Y., Lee, W., et al. (2021) · Science Advances · doi:10.1126/sciadv.abf3804 · Cited by 36
Kang, B., Park, N., Min, H., Lee, J., Jeong, H., Baek, S., Cho, K., & Lee, H. S. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500301 · Cited by 31
Pan, Q., Su, M., Zhang, Z., Chen, B., Huang, Z., Hu, X., Cai, Z., & Song, Y. (2020) · Advanced Materials · doi:10.1002/adma.201907280 · Cited by 29
Self-citationNew materials for next-generation robots
Fischer, P., Nelson, B. J., & Yang, G. (2018) · Science Robotics · doi:10.1126/scirobotics.aau0448 · Cited by 25
A general strategy for printing colloidal nanomaterials into one-dimensional micro/nanolines
Li, Y., Zhang, Z., Su, M., Huang, Z., Li, Z., Li, F., Pan, Q., Ren, W., Hu, X., Li, L., et al. (2018) · Nanoscale · doi:10.1039/c8nr06543h · Cited by 22
Self-citationMapping ICS Materials: Interactive, Connected, and Smart Materials
Parisi, S., Spallazzo, D., Ferraro, V., Ferrara, M., Ceconello, M., Ayala-García, C., & Rognoli, V. (2017) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-73888-8_114 · Cited by 21
Cirelli, M., Hao, J., Bor, T. C., Duvigneau, J., Benson, N., Akkerman, R., Hempenius, M. A., & Vancso, G. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11927 · Cited by 17
Design of functionally cooperating systems and application towards self-propulsive mini-generators
Cheng, M., Zhang, L., & Shi, F. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00548g · Cited by 17
Zhang, Z., Su, M., Pan, Q., Huang, Z., Ren, W., Li, Z., Cai, Z., Li, Y., Li, F., Li, L., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16884 · Cited by 14
Self-citationPan, Q., Chen, S., Su, M., Li, P., Zhang, Z., Hu, X., Chen, G., Huang, Z., Chen, B., Chen, S., et al. (2020) · Advanced Optical Materials · doi:10.1002/adom.202000370 · Cited by 11
Self-citationFully Printed Geranium-Inspired Encapsulated Arrays for Quantitative Odor Releasing
Chen, B., Su, M., Pan, Q., Zhang, Z., Chen, S., Huang, Z., Cai, Z., Li, Z., Qian, X., Hu, X., et al. (2019) · ACS Omega · doi:10.1021/acsomega.9b02916 · Cited by 6
Self-citation
Cited by
Emerging Electrochromic Materials and Devices for Future Displays
Gu, C., Jia, A.-B., Zhang, Y.-M., & Zhang, S. X.-A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01055 · Cited by 833
Metadata
- Authors
- Su, M., & Song, Y.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-20
- Volume
- 122
- Issue
- 5
- Pages
- 5144-5164
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3194139872
- Cited by
- 312
- References
- 199
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.