CoChat

Zeolites in Adsorption Processes: State of the Art and Future Prospects

Open access
Pérez-Botella, Eduardo, Valencia, Susana, Rey, Fernando · 2022 · Chemical Reviews

The DOI matches its Crossref record; 604 of the 604 references it cites were found in a registry or an index; 24 of the 625 sources its claims cite were checked for support.

Abstract

Zeolites have been widely used as catalysts, ion exchangers, and adsorbents since their industrial breakthrough in the 1950s and continue to be state-of the-art adsorbents in many separation processes. Furthermore, their properties make them materials of choice for developing and emerging separation applications. The aim of this review is to put into context the relevance of zeolites and their use and prospects in adsorption technology. It has been divided into three different sections, i.e., zeolites, adsorption on nanoporous materials, and chemical separations by zeolites. In the first section, zeolites are explained in terms of their structure, composition, preparation, and properties, and a brief review of their applications is given. In the second section, the fundamentals of adsorption science are presented, with special attention to its industrial application and our case of interest, which is adsorption on zeolites. Finally, the state-of-the-art relevant separations related to chemical and energy production, in which zeolites have a practical or potential applicability, are presented. The replacement of some of the current separation methods by optimized adsorption processes using zeolites could mean an improvement in terms of sustainability and energy savings. Different separation mechanisms and the underlying adsorption properties that make zeolites interesting for these applications are discussed.

Overview

CoChat Summary

TL;DR

This is a broad review of zeolites as adsorbents, explaining how their structure, synthesis, and adsorption fundamentals connect to industrial and emerging separation processes. The paper argues that optimized zeolitic adsorption could replace or improve current separations with better energy efficiency and sustainability.

Key findings

  • The review identifies zeolites as state-of-the-art adsorbents for several established separations, including hydrogen purification, drying, air separation, linear/branched hydrocarbon separation, and p-xylene separation.
  • It highlights specific benchmark materials and applications: zeolite 5A for hydrogen purification, 3A and 4A for drying, LiLSX for small-scale air separation, ETS-4/CTS-1 for N2/CH4 separation, and K-/Ba-exchanged X and Y zeolites for p-xylene separation.
  • The paper emphasizes that emerging separations are promising for zeolites, especially CO2 capture, olefin/paraffin separation, hydrogen isotope separation, pollutant removal, and bioalcohol recovery, but many still need better adsorbents and process design.
  • The review reports that in 2019 there were 19 large-scale CCS facilities in operation, with 10 in natural gas upgrading, 3 in hydrogen production, 2 in fertilizer production, and 2 in power generation.

Methods

  • Narrative review of the literature, organized into three sections: zeolites, adsorption on nanoporous materials, and chemical separations by zeolites.
  • Synthesizes prior experimental, patent, and computational studies on zeolite structures, synthesis methods, adsorption theory, and industrial separation applications.
  • Uses reported adsorption metrics such as isotherms, selectivities, working capacities, heats of adsorption, and breakthrough experiments to compare materials and separation scenarios.

Limitations

  • The paper is a review, so it does not present a single original experimental dataset or a new unified quantitative comparison across all separations; this is evident from the text.
  • Several sections are explicitly only brief summaries or are incomplete in the provided text, so some application areas are not discussed in depth; this is evident from the text.
  • The review itself notes practical limitations of many promising adsorbents, including high production and scale-up cost, sensitivity to water, and regeneration energy demands.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acs.chemrev.2c00140

Cites

604 of 604 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Front view of the main pores of selected zeolites. The three letter codes written above each picture are the official names given to each structure by the International Zeolite Association. Next to the name, the common name of the zeolite is indicated in parentheses.
Figure 1 Front view of the main pores of selected zeolites. The three letter codes written above each picture are the official names given to each structure by the International Zeolite Association. Next to the name, the common name of the zeolite is indicated in parentheses.CC BY · PubMed Central
Figure 2 Two corner-sharing SiO4 tetrahedra.
Figure 2 Two corner-sharing SiO4 tetrahedra.CC BY · PubMed Central
Figure 3 Isomorphic substitution scheme of some compositional variants of zeolites, exemplified in an LTA cavity.
Figure 3 Isomorphic substitution scheme of some compositional variants of zeolites, exemplified in an LTA cavity.CC BY · PubMed Central
Figure 4 Examples of building units and their possible names, according to the IZA Structure Commission.59 Vertices represent T atoms. Oxygen atoms are not depicted.
Figure 4 Examples of building units and their possible names, according to the IZA Structure Commission.59 Vertices represent T atoms. Oxygen atoms are not depicted.CC BY · PubMed Central
Figure 5 Xylene isomers. From left to right: o-xylene, m-xylene, and p-xylene.
Figure 5 Xylene isomers. From left to right: o-xylene, m-xylene, and p-xylene.CC BY · PubMed Central
Figure 6 Reaction scheme for the production of ε-caprolactam using MFI-structured catalysts.
Figure 6 Reaction scheme for the production of ε-caprolactam using MFI-structured catalysts.CC BY · PubMed Central
Figure 7 Isotherm types, according to the new IUPAC classification. The x-axis is relative pressure, and the y-axis is the adsorbed amount. In cases where a single line is depicted, adsorption and desorption are equal. Where two lines are depicted, i.e., there is a hysteresis phenomenon: red is for desorption and black for adsorption.
Figure 7 Isotherm types, according to the new IUPAC classification. The x-axis is relative pressure, and the y-axis is the adsorbed amount. In cases where a single line is depicted, adsorption and desorption are equal. Where two lines are depicted, i.e., there is a hysteresis phenomenon: red is for desorption and black for adsorption.CC BY · PubMed Central
Figure 8 Possible trends of isosteric heat of adsorption. Trend a is typical of a solid with a finite number of strong adsorption sites and otherwise weak adsorption sites. Trend b belongs to a solid with an energetically heterogeneous surface. Trend c is typical of systems with weak adsorbent–adsorbate interactions.
Figure 8 Possible trends of isosteric heat of adsorption. Trend a is typical of a solid with a finite number of strong adsorption sites and otherwise weak adsorption sites. Trend b belongs to a solid with an energetically heterogeneous surface. Trend c is typical of systems with weak adsorbent–adsorbate interactions.CC BY · PubMed Central
Figure 9 Simplified scheme of a swing adsorption process. Two adsorbent beds (rectangles 1 and 2) are connected in parallel. The pairs of opposed triangles represent valves, white when open and black when closed. In (A) the adsorption step takes place in bed 1 while bed 2 is being regenerated. In (B) the opposite situation takes place.
Figure 9 Simplified scheme of a swing adsorption process. Two adsorbent beds (rectangles 1 and 2) are connected in parallel. The pairs of opposed triangles represent valves, white when open and black when closed. In (A) the adsorption step takes place in bed 1 while bed 2 is being regenerated. In (B) the opposite situation takes place.CC BY · PubMed Central
Figure 10 Working capacity in PSA (WCPSA) and TSA (WCTSA) processes exemplified on two hypothetical isotherms at two different temperatures on the same adsorbent. PADS is the pressure in the adsorption step, and PDES is the pressure in the desorption step of a hypothetical PSA process, with PADS > PDES. T1 is the temperature in the adsorption step, and T2 is the temperature in the desorption step of a hypothetical TSA process, with T1 < T2. WCPSA is calculated as the difference in the adsorbed amounts between PADS and PDES, and WCTSA is calculated as the difference in the adsorbed amounts between T1 and T2.
Figure 10 Working capacity in PSA (WCPSA) and TSA (WCTSA) processes exemplified on two hypothetical isotherms at two different temperatures on the same adsorbent. PADS is the pressure in the adsorption step, and PDES is the pressure in the desorption step of a hypothetical PSA process, with PADS > PDES. T1 is the temperature in the adsorption step, and T2 is the temperature in the desorption step of a hypothetical TSA process, with T1 < T2. WCPSA is calculated as the difference in the adsorbed amounts between PADS and PDES, and WCTSA is calculated as the difference in the adsorbed amounts between T1 and T2.CC BY · PubMed Central
Figure 11 Simplified scheme of a simulated moving bed process. In (A), the layout of the process together with the rotary valve and the sections is presented. The rotary valve, the inlets of diluent and feed, and outlets of extract and raffinate are the moving parts of the system (gray). The discontinuous arrow indicates the direction of the rotation. The continuous arrows indicate the direction of the flow. In (B) the composition profile of the liquid phase is depicted.
Figure 11 Simplified scheme of a simulated moving bed process. In (A), the layout of the process together with the rotary valve and the sections is presented. The rotary valve, the inlets of diluent and feed, and outlets of extract and raffinate are the moving parts of the system (gray). The discontinuous arrow indicates the direction of the rotation. The continuous arrows indicate the direction of the flow. In (B) the composition profile of the liquid phase is depicted.CC BY · PubMed Central
Figure 12 Example of a breakthrough profile of a binary mixture of compounds on an adsorbent that preferably adsorbs compound 2.
Figure 12 Example of a breakthrough profile of a binary mixture of compounds on an adsorbent that preferably adsorbs compound 2.CC BY · PubMed Central
Figure 13 Nitrogen loading of zeolites Li(1.25)X and Li(1.0)X and selectivity of Li(1.0)X vs lithium ion exchange. Li(1.25)X stands for LiLSX with a Si/Al ratio of 1.25, and Li(1.0)X stands for LiLSX with a Si/Al ratio of 1.0. Lines are guides to the eye. Li exchange percentage refers to the total amount of extraframework cations.
Figure 13 Nitrogen loading of zeolites Li(1.25)X and Li(1.0)X and selectivity of Li(1.0)X vs lithium ion exchange. Li(1.25)X stands for LiLSX with a Si/Al ratio of 1.25, and Li(1.0)X stands for LiLSX with a Si/Al ratio of 1.0. Lines are guides to the eye. Li exchange percentage refers to the total amount of extraframework cations.CC BY · PubMed Central

Verification

Claims the paper makes

23 Valid · 19 Not valid · 260 Not checked · 111 Own results and interpretations

153 more claims · 9 with their cited sources checked

Create a free account to see all 413 claims and to verify the 77 references still open.

See all claims — free account
  • Probably not a substantial claim. 159
  • It may state two separate claims as one. 157

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Items 201–400 of 604

Research works printed but not linked: 62

  1. de Haan A. B., 2020, Industrial Separation Processes
  2. Global CCS Institute, 2019, Global Status Report of CCS
  3. Seader J. D., 2011, Separation Process Principles: Chemical and Biochemical Separations
  4. Methivier, A. In Zeolites for Cleaner Technologies ; Guisnet, M., Gilson, J.P., Eds. Imperial College Press: London, 2002; Vol. 3; Chapter 10, pp 209–221.
  5. Cronstedt A. F., 1756, Kongl. Vetenskaps Acad. Handl., 17, 120
  6. Damour M. A., 1840, Ann. Mines, 3, 191
  7. Sainte-Claire-Deville M. H., 1862, C. R. Acad. Sci., 54, 324
  8. Gans R., 1905, Jb. Kön. Preuss. geol. Landesanst., 26, 179
  9. Gans R., 1906, Jb. Kön. Preuss. geol. Landesanst., 27, 63
  10. Friedel G., 1896, Bull. Soc. Fr. Mineral., 19, 94
  11. Grandjean M. F., 1909, C. R. Acad. Sci., 149, 866
  12. McBain J. W., 1932, The Sorption of Gases and Vapors by Solids
  13. Wright, P. A.; Lozinska, M. In Zeolites and Ordered Porous Solids: Fundamentals and Applications ; Martinez Sanchez, C., Perez Pariente, J., Eds. Editorial Universitat Politecnica de Valencia: Valencia, 2011; Chapter 1, pp 1–36.
  14. Moliner, M. In Zeolites and Ordered Porous Solids: Fundamentals and Applications , 1st ed. Martínez, C., Pérez-Pariente, J., Eds. Universitat Politècnica de València: Valencia, 2011; Chapter 2, pp 37–66.
  15. Milton R. M., 1989, ACS Symposium Series, 398, 1
  16. Loewenstein W., 1954, Am. Mineral., 39, 92
  17. Flanigen, E. M.; Broach, R. W.; Wilson, S. T. In Zeolites in Industrial Separation and Catalysis ; Kulprathipanja, S., Ed. Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2010; Chapter 1, pp 1–26.
  18. Colella, C. In Stud. Surf. Sci. Catal. ; Čejka, J., Van Bekkum, H., Eds. Elsevier B.V., 2005; Vol. 157; pp 13–40.
  19. Morris, R. E. Zeolites Catal . Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2010; Vol. 1, pp 87–105.
  20. Barrer R., 1958, Proc. Chem. Soc., 0, 99
  21. Dyer, A. In Introduction to Zeolite Science and Practice , 3rd ed. Čejka, J., Van Bekkum, H., Corma, A., Schüth, F., Eds. Elsevier B.V.: Amsterdam, 2007; Chapter 16, pp 525–553.
  22. Ames L. L., 1962, Am. Mineral., 47, 1317
  23. Dyer, A. In Environmental Mineralogy Microbial Interactions, Anthropogenic Influences, Contaminated Land and Waste Management , 9th ed. Cotter-Howells, J. D., Campbell, L. S., Valsami-Jones, E., Batchelder, M., Eds. Mineralogical Society of Great Britain and Ireland: London, 2000; Chapter 17, pp 319 – 353.
  24. Perego, C.; Carati, A. In Zeolites: From Model Materials to Industrial Catalysts ; Cejka, J., Perez-Pariente, J., Roth, W., Eds. Transworld Research Network: Kerala, India, 2008; Vol. 661, Chapter 14, pp 357–389.
  25. Corma, A. In Zeolite Microporous Solids: Synthesis, Structure, and Reactivity ; Derouane, E. G., Lemos, F., Naccache, C., Ribeiro, F. R., Eds. Springer Netherlands: Dordrecht, 1992; Vol. 100, Chapter 18, pp 373–436.
  26. Zhou, L. In Handbook of Petroleum Refining Processes ; Meyers, R. A., Ed. McGraw-Hill: New York, 2004; Chapter 2.4, pp 29–2.
  27. Doolan P. C., 1989, Hydrocarb. Process., 68, 72
  28. Olson, D. H.; Haag, W. O. In ACS Symposium Series ; Whyte, T. E., Betta, R. A. D., Derouane, E. G., Baker, R. T. K., Eds. American Chemical Society: Washington, DC, 1984; Chapter 14, pp 275–307.
  29. Zeolyst International, ATA-21, 2013, A New Standard for Transalkylation Catalysis
  30. Barrett, P. a.; Stephenson, N. A. In Zeolites and Ordered Porous Solids: Fundamentals and Applications ; Martínez Sánchez, C., Pérez Pariente, J., Eds. Ed.ial Universitat Politecnica de Valencia: Valencia, 2011; Chapter 6, pp 149–180.
  31. McCusker L. B., 1984, Proceedings of the Sixth International Zeolite Conference, 812
  32. Sircar, S. In Particle Technology and Applications ; Lee, S., Henthorn, K. H., Eds. CRC Press Taylor & Francis Group: Boca Raton, 2012; Chapter 7, pp 87–110.
  33. Dubinin, M. In Progress in Surface and Membrane Science ; Cadenhead, D., Danielli, J., Rosenberg, M., Eds. Elsevier, 1975; Vol. 9, pp 1–70.
  34. Jobic, H. Adsorpt. Diffus. ; Springer Berlin Heidelberg: Berlin, Heidelberg, 2008; Vol. 7, pp 207–233.
  35. Kärger J., 2004, Surf. Sci., 154, 1791
  36. Metropolis N., 1987, Los Alamos Science, 125
  37. Smyth C. P., 1955, International Chemical Series
  38. Sircar, S.; Golden, T. C. In Hydrogen and Syngas Production and Purification Technologies ; Liu, K., Song, C., Subramani, V., Eds. John Wiley & Sons, Inc.: Hoboken, 2010; Chapter 10, pp 414–450. · DOI · Paper page
  39. Kidnay, A. J.; Parrish, W. R. CRC Press Taylor & Francis ; Taylor & Francis Group, 2006; p 418.
  40. Mitariten M., 2001, Oil & Gas Journal, 99, 42
  41. Sapag, K.; Vallone, A.; Garcia, A.; Solar, C. In Natural Gas ; Potocnik, P., Ed. Sciyo: Paris, 2010; Chapter 10, pp 205–245.
  42. Bakar, W. A. W. A.; Ali, R. In Natural Gas ; Potocnik, P., Ed. Sciyo: Paris, 2010; Chapter 1, pp 1–38.
  43. Kim A. G., 1973, The Composition of Coalbed Gas (Report of Investigations 7762)
  44. International Energy Agency., 2019, Global Energy & CO2 Status Report 2019
  45. World Energy Council., 2017, Full Report: the Role of Natural Gas (Perspective from the 2016 World Energy Scenarios)
  46. Neiva, L. S.; Gama, L. In Natural Gas ; Potocnik, P., Ed. Sciyo: Paris, 2010; Chapter 3, pp 71–85.
  47. Aitani A. M., 1993, Hydrocarb. Process., 67
  48. IPCC., 2014, Synthesis Report
  49. Air Products, 2020, Sustainability Report
  50. IEA., 2021, Direct Air Capture
  51. 10.30492/IJCCE.2010.6411 · doi:10.30492/ijcce.2010.6411
  52. European Commission., 2006, Reference Document on Best Available Techniques for the Waste Treatments Industries
  53. European Commission., 2007, Reference Document on Best Available Techniques for the Manufacture of Large Vol. Inorganic Chemicals - Ammonia, Acids and Fertilisers
  54. Hamed-Pourzolfaghar, 2014, Int. J. Chem. Environ. Eng., 5, 22
  55. Chauvel A., 1989, Institute Français du Pétrole publications
  56. Nam G.-m., 2005, Society, 61, 72
  57. Chang G., 2015, ChemComm, 51, 2859
  58. Asher W. J., 1969, Hydrocarb. Process., 48, 134
  59. Barrer R. M., 1945, J. Soc. Chem. Ind., 64, 130
  60. Axens Solutions, 2017, ATOL Commercial Bulletin: An innovative Technology for Bio-ethylene Production Through Bio-ethanol Dehydration
  61. Gnansounou E., 2005, J. Sci. Ind. Res., 64, 809
  62. Butamax BP and DuPont joint venture. Butamax, announces next Step in Commercialization of Bio-Isobutanol with acquisition of Ethanol Facility in Kansas ; 2017; https://www.bp.com/en/global/corporate/news-and-insights/press-releases/bp-and-dupont-joint-venture.html (accessed 13 February 2022).

Cited by

See all 1,126

Metadata

Authors
Pérez-Botella, E., Valencia, S., & Rey, F.
Affiliations
  • Instituto de Tecnología Química (ITQ), Universitat Politècnica de València (UPV) - Consejo Superior de Investigaciones Científicas (CSIC), Av. de los Naranjos s/n, 46022 Valencia, Spain
  • Consejo Superior de Investigaciones Científicas (ES)
Corresponding author
Rey, Fernando
Venue
Chemical Reviews
Published
2022-10-19
Volume
122
Issue
24
Pages
17647-17695
ISSN
  • 0009-2665 (ISSN-L)
  • 1520-6890
OpenAlex
W4306840209
Cited by
1,126
References
594
Citations by year
2026: 377 · 2025: 396 · 2024: 258 · 2023: 94 · 2022: 1
FWCI
10.82
Type
journal article
Language
en
Open access
Locations
  • Chemical Reviews (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RiuNet (Universitat Politècnica de València) (publishedVersion, cc-by)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by)
Funders
  • Generalitat Valenciana (PROMETEO/2021/077)
  • Ministerio de Educaci??n, Cultura y Deporte (FPU15/01602)
  • Agencia Estatal de Investigaci??n (RTI2018-101784-B-I00)
Topics
  • Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Chemical Synthesis and Characterization
Keywords
zeolites, adsorption, adsorbents, nanoporous materials, chemical separation, adsorption mechanism, energy production, sustainability
MeSH terms
Adsorption, Catalysis, Technology, Zeolites

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.